dmesg - zaja-stacjonarny
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-34-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:11:12 UTC 2012 (Ubuntu 3.2.0-34.53-generic-pae 3.2.33)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfdd0000 (usable)
BIOS-e820: 00000000cfdd0000 - 00000000cfdd3000 (ACPI NVS)
BIOS-e820: 00000000cfdd3000 - 00000000cfe00000 (ACPI data)
BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-970A-DS3/GA-970A-DS3, BIOS F3 07/09/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
total RAM covered: 3326M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00f4bb0] f4bb0
initial memory mapped : 0 - 02000000
Base memory trampoline at [c0096000] 96000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 364ee000 - 3726f000
ACPI: RSDP 000f66a0 00014 (v00 GBT )
ACPI: RSDT cfdd3000 00044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP cfdd3080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT cfdd3100 075FA (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS cfdd0000 00040
ACPI: SSDT cfdda7c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MSDM cfddb080 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET cfddb100 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG cfddb140 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG cfddb180 001A2 (v01 GBT GBT B0 5455312E BG?? 00000101)
ACPI: APIC cfdda700 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS cfddb340 05EDF (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
8068MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x000cfdd0
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096474
free_area_init_node: node 0, pgdat c186b180, node_mem_map f1eee200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3946 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 16137 pages used for memmap
HighMem zone: 1852105 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7b000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2078553
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 36699904 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00230000)
Memory: 8252844k/9175040k available (5824k kernel code, 133052k reserved, 2850k data, 744k init, 7472968k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1879000 - 0xc1933000 ( 744 kB)
.data : 0xc15b003c - 0xc1878980 (2850 kB)
.text : 0xc1000000 - 0xc15b003c (5824 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3423.163 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6846.32 BogoMIPS (lpj=13692652)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 26579 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f74d8000 soft=f74da000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 96000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
System has AMD C1E enabled
Switch to broadcast mode on CPU1
CPU 2 irqstacks, hard=f74e6000 soft=f74e8000
#2
smpboot cpu 2: start_ip = 96000
Initializing CPU#2
NMI watchdog enabled, takes one hw-pmu counter.
Switch to broadcast mode on CPU2
CPU 3 irqstacks, hard=f74fc000 soft=f74fe000
#3
smpboot cpu 3: start_ip = 96000
Initializing CPU#3
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (27383.47 BogoMIPS).
Switch to broadcast mode on CPU3
Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at cfdd0000 (12288 bytes)
print_constraints: dummy:
RTC time: 18:05:24, date: 12/13/12
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [a000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 05] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0600000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:00.0: [10de:016a] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfd7f8000-0xfd7fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
pci 0000:03:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
Freeing initrd memory: 13828k freed
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009a000 - 000000000009ffff
reserve RAM buffer: 00000000cfdd0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0900-0x091f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x0800-0x08fe]
pnp 00:02: [io 0x0a10-0x0a17]
pnp 00:02: [io 0x0b00-0x0b0f]
pnp 00:02: [io 0x0b10-0x0b1f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:02: [io 0x0900-0x091f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x08fe] has been reserved
system 00:02: [io 0x0a10-0x0a17] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xe0000000-0xefffffff]
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000d4200-0x000d7fff]
pnp 00:09: [mem 0x000f0000-0x000f7fff]
pnp 00:09: [mem 0x000f8000-0x000fbfff]
pnp 00:09: [mem 0x000fc000-0x000fffff]
pnp 00:09: [mem 0xcfdd0000-0xcfddffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xcfdcffff]
pnp 00:09: [mem 0xcfe00000-0xcfefffff]
pnp 00:09: [mem 0xcff00000-0xcfffffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: [mem 0xfff80000-0xfffeffff]
pnp 00:09: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:09: disabling [mem 0x00100000-0xcfdcffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:09: [mem 0xcfdd0000-0xcfddffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03-03]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:16.0: PCI INT A disabled
pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:16.2: PCI INT B disabled
pci 0000:01:00.0: Boot video device
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1355421924.880:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1550
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd7f8000
xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
Refined TSC clocksource calibration: 3422.890 MHz.
Switching to clocksource tsc
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: HPA detected: current 625140335, native 625142448
ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
ata2.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN01, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sda: p7 size 84215808 extends beyond EOD, enabling native capacity
ata2: hard resetting link
usb 4-1: new low-speed USB device number 2 using ohci_hcd
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:436:89
rtc_cmos 00:05: setting system clock to 2012-12-13 18:05:26 UTC (1355421926)
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3400 MHz)
powernow-k8: 1 : pstate 1 (2700 MHz)
powernow-k8: 2 : pstate 2 (2200 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 4-2: new low-speed USB device number 3 using ohci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: n_sectors mismatch 625140335 != 625142448
ata2.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sda: detected capacity change from 320071851520 to 320072933376
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 744k freed
Write protecting the kernel text: 5828k
Write protecting the kernel read-only data: 2380k
NX-protecting the kernel data: 4412k
udevd[102]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xf8420000, 90:2b:34:96:37:78, XID 0c900800 IRQ 41
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:12.0-1/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input3
generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:12.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input4
generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
usb 7-3: new low-speed USB device number 2 using ohci_hcd
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
generic-usb 0003:0665:5161.0004: hiddev0,hidraw3: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:16.0-3/input0
usb 3-4: new high-speed USB device number 3 using ehci_hcd
Initializing USB Mass Storage driver...
scsi6 : usb-storage 3-4:1.0
scsi7 : usb-storage 3-4:1.1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sr1: scsi-1 drive
sr 6:0:0:0: Attached scsi CD-ROM sr1
sr 6:0:0:0: Attached scsi generic sg2 type 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdb] Attached SCSI removable disk
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[335]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xb8fe00 already in use
Adding 1998844k swap on /dev/sda8. Priority:-1 extents:1 across:1998844k
udevd[346]: renamed network interface eth0 to eth1
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 304.43 Sun Aug 19 20:20:21 PDT 2012
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
type=1400 audit(1355418339.092:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=670 comm="apparmor_parser"
type=1400 audit(1355418339.092:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=670 comm="apparmor_parser"
type=1400 audit(1355418339.092:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=672 comm="apparmor_parser"
type=1400 audit(1355418339.092:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=670 comm="apparmor_parser"
type=1400 audit(1355418339.092:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=672 comm="apparmor_parser"
type=1400 audit(1355418339.096:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=672 comm="apparmor_parser"
hda_codec: ALC887-VD: BIOS auto-probing.
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line-Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8700000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
usb 3-4: USB disconnect, device number 3
init: failsafe main process (812) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1355418341.060:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=874 comm="apparmor_parser"
type=1400 audit(1355418341.060:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=874 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1355418341.080:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=920 comm="apparmor_parser"
type=1400 audit(1355418341.080:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=921 comm="apparmor_parser"
r8169 0000:03:00.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
usb 3-4: new high-speed USB device number 4 using ehci_hcd
scsi13 : usb-storage 3-4:1.5
scsi14 : usb-storage 3-4:1.6
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for GSM modem (1-port)
cdc_ether 3-4:1.1: wwan0: register 'cdc_ether' at usb-0000:00:16.2-4, Mobile Broadband Network Device, 02:50:f3:00:00:00
option 3-4:1.0: GSM modem (1-port) converter detected
usbcore: registered new interface driver cdc_ether
usb 3-4: GSM modem (1-port) converter now attached to ttyUSB0
option 3-4:1.3: GSM modem (1-port) converter detected
usb 3-4: GSM modem (1-port) converter now attached to ttyUSB1
option 3-4:1.4: GSM modem (1-port) converter detected
usb 3-4: GSM modem (1-port) converter now attached to ttyUSB2
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
scsi 13:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
scsi 14:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sr1: scsi-1 drive
sr 13:0:0:0: Attached scsi CD-ROM sr1
sr 13:0:0:0: Attached scsi generic sg2 type 5
sd 14:0:0:0: Attached scsi generic sg3 type 0
sd 14:0:0:0: [sdb] Attached SCSI removable disk
audit_printk_skb: 45 callbacks suppressed
type=1701 audit(1355418376.420:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2044 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb35a9424 code=0x50001
type=1701 audit(1355418382.912:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2141 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb3555424 code=0x50001
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
usb 7-3: usbfs: USBDEVFS_CONTROL failed cmd java rqt 33 rq 9 len 8 ret -110
PPP BSD Compression module registered
PPP Deflate Compression module registered
usb 7-3: usbfs: USBDEVFS_CONTROL failed cmd java rqt 33 rq 9 len 8 ret -110
usb 7-3: usbfs: USBDEVFS_CONTROL failed cmd java rqt 33 rq 9 len 8 ret -110
usb 1-5: new high-speed USB device number 4 using ehci_hcd
scsi15 : usb-storage 1-5:1.3
cdc_acm 1-5:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-5:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
scsi 15:0:0:0: Direct-Access SAMSUNG GT-S5660 Card 0100 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg4 type 0
sd 15:0:0:0: [sdc] Attached SCSI removable disk
sd 15:0:0:0: [sdc] 3858489 512-byte logical blocks: (1.97 GB/1.83 GiB)
sd 15:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sdc: detected capacity change from 1975546368 to 0
usb 1-5: USB disconnect, device number 4
sd 15:0:0:0: [sdc] Synchronizing SCSI cache
sd 15:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
type=1701 audit(1355423090.943:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=5716 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb3571424 code=0x50001
type=1701 audit(1355423091.890:30): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=5809 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb3502424 code=0x50001
usb 7-3: usbfs: USBDEVFS_CONTROL failed cmd java rqt 33 rq 9 len 8 ret -110