dmesg - t2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000aaabefff] usable
BIOS-e820: [mem 0x00000000aaabf000-0x00000000aaebefff] reserved
BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Dell Inc. Inspiron 5520/04G65K, BIOS A07 05/17/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0AB000000 mask FFF000000 uncachable
3 base 0AC000000 mask FFC000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFA00000 mask FFFE00000 write-protect
6 base 0FFC00000 mask FFFC00000 write-protect
7 base 100000000 mask F00000000 write-back
8 base 200000000 mask FC0000000 write-back
9 base 240000000 mask FF0000000 write-back
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xaaffffff]
[mem 0x00000000-0xaaffffff] page 2M
kernel direct mapping tables up to 0xaaffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x24f5fffff]
[mem 0x100000000-0x24f5fffff] page 2M
kernel direct mapping tables up to 0x24f5fffff @ [mem 0xaaab4000-0xaaabefff]
RAMDISK: [mem 0x7efb0000-0x7fffffff]
ACPI: RSDP 00000000000fe020 00024 (v02 DELL )
ACPI: XSDT 00000000aaffe210 0008C (v01 DELL CL09 00000001 01000013)
ACPI: FACP 00000000aaffa000 0010C (v05 DELL CL09 00000001 ASL 00040000)
ACPI: DSDT 00000000aafed000 09033 (v01 DELL CL09 00000000 ASL 00040000)
ACPI: FACS 00000000aafb9000 00040
ACPI: SLIC 00000000aaffd000 00176 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: UEFI 00000000aaffc000 00236 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASF! 00000000aaffb000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
ACPI: HPET 00000000aaff9000 00038 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: APIC 00000000aaff8000 0008C (v03 DELL CL09 00000001 ASL 00040000)
ACPI: MCFG 00000000aaff7000 0003C (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 00000000aafec000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: BOOT 00000000aafea000 00028 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASPT 00000000aafe5000 00034 (v07 DELL CL09 00000001 ASL 00040000)
ACPI: FPDT 00000000aafe3000 00044 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 00000000aafe2000 00968 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 00000000aafe1000 00A92 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
NODE_DATA [mem 0x24f5fc000-0x24f5fffff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xaaabefff]
node 0: [mem 0xaafff000-0xaaffffff]
node 0: [mem 0x100000000-0x24f5fffff]
On node 0 totalpages: 2072140
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 678143 pages, LIFO batch:31
Normal zone: 21464 pages used for memmap
Normal zone: 1352232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000aaabf000 - 00000000aaebf000
PM: Registered nosave memory: 00000000aaebf000 - 00000000aafbf000
PM: Registered nosave memory: 00000000aafbf000 - 00000000aafff000
PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88024f200000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034286
Policy zone: Normal
Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8057964k/9689088k available (6711k kernel code, 1400528k absent, 230596k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2494.153 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.30 BogoMIPS (lpj=9976612)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (19953.22 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
dummy:
RTC time: 0:49:20, date: 12/08/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000aae19018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: SSDT 00000000aae1aa98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: SSDT 00000000aae18d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0xafa00000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0x3000-0x303f]
pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xc0600000-0xc060ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xc0614000-0xc061400f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xc0619000-0xc06193ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xc0610000-0xc0613fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xc0618000-0xc06183ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0x3088-0x308f]
pci 0000:00:1f.2: >reg 14: [io 0x3094-0x3097]
pci 0000:00:1f.2: >reg 18: [io 0x3080-0x3087]
pci 0000:00:1f.2: >reg 1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: >reg 20: [io 0x3060-0x307f]
pci 0000:00:1f.2: >reg 24: [mem 0xc0617000-0xc06177ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xc0615000-0xc06150ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x3040-0x305f]
pci 0000:01:00.0: >[10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: >reg 10: [io 0x2000-0x20ff]
pci 0000:01:00.0: >reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:01:00.0: >reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: > bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:02:00.0: >[8086:0887] type 00 class 0x028000
pci 0000:02:00.0: >reg 10: [mem 0xc0500000-0xc0501fff 64bit]
pci 0000:02:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xc0500000-0xc05fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
_OSC request data:1 1f 1f
pci0000:00: >Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xaaabf000-0xabffffff]
e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-fe]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xafa00000-0xfeafffff window]
pnp 00:00: >[mem 0x00010000-0x0001ffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0000-0x001f]
pnp 00:01: >[io 0x0081-0x0091]
pnp 00:01: >[io 0x0093-0x009f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >[dma 4]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[mem 0xff010000-0xffffffff]
pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x00f0]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x0453]
pnp 00:05: >[io 0x0458-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
pnp 00:05: >[io 0xfd60-0xfd63]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x0453] has been reserved
system 00:05: >[io 0x0458-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >[io 0xfd60-0xfd63] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0454-0x0457]
system 00:07: >[io 0x0454-0x0457] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
pnp 00:08: >[irq 1]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs DLL0569 PNP0f13 (active)
pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
pnp 00:0a: >[mem 0xe0000000-0xefffffff]
pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
pnp 00:0a: >[mem 0xff000000-0xff000fff]
pnp 00:0a: >[mem 0xff010000-0xffffffff]
pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
pnp 00:0a: >[mem 0xafa00000-0xafa00fff]
system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: >[mem 0xafa00000-0xafa00fff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0x20000000-0x201fffff]
pnp 00:0b: >[mem 0x40004000-0x40004fff]
system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: > bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xc0500000-0xc05fffff]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:01: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: >resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:02: >resource 1 [mem 0xc0500000-0xc05fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa6ab4000-0xaaab3fff] (64MB) mapped at [ffff8800a6ab4000-ffff8800aaab3fff]
Simple Boot Flag value 0x67 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1354927762.920:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15738
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 16704k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 40
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 40
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xc0619000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xc0618000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 21, io mem 0xc0600000
xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 8:421:809
rtc_cmos 00:06: >setting system clock to 2012-12-08 00:49:23 UTC (1354927763)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: Battery Slot [BAT1] (battery present)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: ATAPI: MATSHITA DVD+/-RW UJ8D1, D.02, max UDMA/100
ata3.00: configured for UDMA/100
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
Refined TSC clocksource calibration: 2494.333 MHz.
Switching to clocksource tsc
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
sda: sda1 sda2 sda3
sd 0:0:0:0: >[sda] Attached SCSI disk
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
scsi 2:0:0:0: >CD-ROM MATSHITA DVD+-RW UJ8D1 D.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: >Attached scsi CD-ROM sr0
sr 2:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[115]: starting version 175
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: >setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
pci 0000:00:00.0: >Intel Ivybridge Chipset
r8169 0000:01:00.0: >irq 42 for MSI/MSI-X
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
r8169 0000:01:00.0: >eth0: RTL8105e at 0xffffc90000c5a000, d4:be:d9:3e:85:58, XID 00c00000 IRQ 42
pci 0000:00:00.0: >detected 65536K stolen memory
wmi: Mapper loaded
i915 0000:00:02.0: >irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 3-2: >new high-speed USB device number 2 using xhci_hcd
usb 3-2: >New USB device found, idVendor=0781, idProduct=5406
usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: >Product: U3 Cruzer Micro
usb 3-2: >Manufacturer: SanDisk Corporation
usb 3-2: >SerialNumber: 0000161511728B26
usb 3-2: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Initializing USB Mass Storage driver...
usbcore: registered new interface driver uas
scsi6 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-3: >new high-speed USB device number 3 using xhci_hcd
usb 3-3: >New USB device found, idVendor=0424, idProduct=2514
usb 3-3: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: >USB hub found
hub 3-3:1.0: >4 ports detected
usb 1-1.3: >new high-speed USB device number 3 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: >Product: USB2.0-CRW
usb 1-1.3: >Manufacturer: Generic
usb 1-1.3: >SerialNumber: 20100201396000000
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
usb 1-1.5: >new high-speed USB device number 4 using ehci_hcd
usb 1-1.5: >New USB device found, idVendor=0c45, idProduct=648d
usb 1-1.5: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.5: >Product: Laptop_Integrated_Webcam_HD
usb 1-1.5: >Manufacturer: CNFB194I192060001P40
usb 2-1.5: >new full-speed USB device number 3 using ehci_hcd
fbcon: inteldrmfb (fb0) is primary device
usb 2-1.5: >New USB device found, idVendor=8087, idProduct=07da
usb 2-1.5: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-3.1: >new low-speed USB device number 4 using xhci_hcd
usb 3-3.1: >New USB device found, idVendor=046d, idProduct=c05a
usb 3-3.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.1: >Product: USB Optical Mouse
usb 3-3.1: >Manufacturer: Logitech
usb 3-3.1: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input4
hid-generic 0003:046D:C05A.0001: >input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3.1/input0
usb 3-3.2: >new low-speed USB device number 5 using xhci_hcd
usb 3-3.2: >New USB device found, idVendor=045e, idProduct=00db
usb 3-3.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.2: >Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
usb 3-3.2: >Manufacturer: Microsoft
usb 3-3.2: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.2: >ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/input/input5
microsoft 0003:045E:00DB.0002: >input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:14.0-3.2/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/input/input6
microsoft 0003:045E:00DB.0003: >input,hidraw2: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:14.0-3.2/input1
scsi 6:0:0:0: >Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
scsi 6:0:0:1: >CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
sd 6:0:0:0: >Attached scsi generic sg2 type 0
sd 6:0:0:0: >[sdb] 8009728 512-byte logical blocks: (4.10 GB/3.81 GiB)
sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 6:0:0:1: >Attached scsi CD-ROM sr1
sr 6:0:0:1: >Attached scsi generic sg3 type 5
sd 6:0:0:0: >[sdb] Write Protect is off
sd 6:0:0:0: >[sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: >[sdb] No Caching mode page present
sd 6:0:0:0: >[sdb] Assuming drive cache: write through
sd 6:0:0:0: >[sdb] No Caching mode page present
sd 6:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: >[sdb] No Caching mode page present
sd 6:0:0:0: >[sdb] Assuming drive cache: write through
sd 6:0:0:0: >[sdb] Attached SCSI removable disk
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
ACPI Warning: _BQC returned an invalid level (20120320/video-480)
acpi device:31: >registered as cooling_device9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
xor: automatically using best checksumming function:
avx : 18549.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[2575]: starting version 175
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
dcdbas dcdbas: >Dell Systems Management Base Driver (version 5.6.0-3.2)
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 44 for MSI/MSI-X
mei 0000:00:16.0: >wd: failed to find the client
ppdev: user-space parallel port driver
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: Dell WMI hotkeys as /devices/virtual/input/input8
device-mapper: multipath: version 1.4.0 loaded
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: failsafe main process (2833) killed by TERM signal
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:648d)
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlwifi: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000
iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000d04000
iwlwifi 0000:02:00.0: >HW Revision ID = 0xC4
iwlwifi 0000:02:00.0: >irq 45 for MSI/MSI-X
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
scsi7 : SCSI emulation for RTS5139 USB card reader
scsi 7:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
usbcore: registered new interface driver rts5139
sd 7:0:0:0: >Attached scsi generic sg4 type 0
sd 7:0:0:0: >[sdc] Attached SCSI removable disk
iwlwifi 0000:02:00.0: >loaded firmware version 18.168.6.1
iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:02:00.0: >L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: >device EEPROM VER=0x81c, CALIB=0x6
iwlwifi 0000:02:00.0: >Device SKU: 0x150
iwlwifi 0000:02:00.0: >Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'iwl-agn-rs'
snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
psmouse serio1: >elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
hda_codec: CX20590: BIOS auto-probing.
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
r8169 0000:01:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: >L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: >Radio type=0x2-0x0-0x0
iwlwifi 0000:02:00.0: >L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: >Radio type=0x2-0x0-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 20:4e:7f:0c:f7:ba
wlan0: send auth to 20:4e:7f:0c:f7:ba (try 1/3)
wlan0: authenticated
wlan0: associate with 20:4e:7f:0c:f7:ba (try 1/3)
wlan0: RX AssocResp from 20:4e:7f:0c:f7:ba (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
type=1701 audit(1354959653.025:2): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=14049 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f39c3216ed9 code=0x50000
type=1701 audit(1354960012.353:3): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=14334 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fcbf40e5ed9 code=0x50000
type=1701 audit(1354961003.141:4): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=14607 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f616ff10ed9 code=0x50000
type=1701 audit(1354962496.477:5): auid=4294967295 uid=999 gid=999 ses=4294967295 pid=16268 comm="chromium-browse" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f275ef5aed9 code=0x50000