dmesg - bork-results
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d7e8ffff] usable
BIOS-e820: [mem 0x00000000d7e90000-0x00000000d7edffff] reserved
BIOS-e820: [mem 0x00000000d7ee0000-0x00000000d7ee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000d7ee3000-0x00000000d7eeffff] ACPI data
BIOS-e820: [mem 0x00000000d7ef0000-0x00000000d7efffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. Inspiron 545/0N826N, BIOS A11 09/07/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x128000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask FE0000000 write-back
1 base 120000000 mask FF8000000 write-back
2 base 000000000 mask F80000000 write-back
3 base 080000000 mask FC0000000 write-back
4 base 0C0000000 mask FF0000000 write-back
5 base 0D0000000 mask FF8000000 write-back
6 base 0D7F00000 mask FFFF00000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4GB, range: 512MB, type WB
reg 1, base: 4608MB, range: 128MB, type WB
reg 2, base: 0GB, range: 2GB, type WB
reg 3, base: 2GB, range: 1GB, type WB
reg 4, base: 3GB, range: 256MB, type WB
reg 5, base: 3328MB, range: 128MB, type WB
reg 6, base: 3455MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2G num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3455MB, range: 1MB, type UC
reg 2, base: 3456MB, range: 128MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 128MB, type WB
e820: update [mem 0xd7f00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd7e90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4120-0x000f412f] mapped at [ffff8800000f4120]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xd7e8ffff]
[mem 0x00000000-0xd7dfffff] page 2M
[mem 0xd7e00000-0xd7e8ffff] page 4k
kernel direct mapping tables up to 0xd7e8ffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x127ffffff]
[mem 0x100000000-0x127ffffff] page 2M
kernel direct mapping tables up to 0x127ffffff @ [mem 0xd7e8a000-0xd7e8ffff]
RAMDISK: [mem 0x362e4000-0x37169fff]
ACPI: RSDP 00000000000f99c0 00014 (v00 DELL )
ACPI: RSDT 00000000d7ee3000 00040 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: FACP 00000000d7ee3080 00074 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: DSDT 00000000d7ee3100 03F8D (v01 DELL AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000d7ee0000 00040
ACPI: HPET 00000000d7ee7180 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
ACPI: MCFG 00000000d7ee71c0 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SLIC 00000000d7ee7200 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: DMY2 00000000d7ee7380 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: APIC 00000000d7ee70c0 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
ACPI: SSDT 00000000d7ee7d20 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000127ffffff]
Initmem setup node 0 [mem 0x00000000-0x127ffffff]
NODE_DATA [mem 0x127ffc000-0x127ffffff]
[ffffea0000000000-ffffea00049fffff] PMD -> [ffff880123600000-ffff8801275fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x127ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xd7e8ffff]
node 0: [mem 0x100000000-0x127ffffff]
On node 0 totalpages: 1048094
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 863952 pages, LIFO batch:31
Normal zone: 2560 pages used for memmap
Normal zone: 161280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000d7e90000 - 00000000d7ee0000
PM: Registered nosave memory: 00000000d7ee0000 - 00000000d7ee3000
PM: Registered nosave memory: 00000000d7ee3000 - 00000000d7ef0000
PM: Registered nosave memory: 00000000d7ef0000 - 00000000d7f00000
PM: Registered nosave memory: 00000000d7f00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xf0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880127c00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029144
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4029612k/4849664k available (6711k kernel code, 657288k absent, 162764k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2493.696 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.39 BogoMIPS (lpj=9974784)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (19949.56 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xd7ee0000-0xd7ee2fff] (12288 bytes)
dummy:
RTC time: 18:52:10, date: 11/30/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000d7ee7440 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: SSDT 00000000d7ee7900 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: SSDT 00000000d7ee7a60 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203)
ACPI: SSDT 00000000d7ee7bc0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xd7f50000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xd7f50000-0xfebfffff]
pci 0000:00:00.0: >[8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: >[8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: >reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: >[8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: >reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.2: >[8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: >reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.7: >[8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: >reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: >[8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.1: >[8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.2: >[8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.7: >[8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
pci 0000:00:1f.2: >[8086:2920] type 00 class 0x01018f
pci 0000:00:1f.2: >reg 10: [io 0xf900-0xf907]
pci 0000:00:1f.2: >reg 14: [io 0xf800-0xf803]
pci 0000:00:1f.2: >reg 18: [io 0xf700-0xf707]
pci 0000:00:1f.2: >reg 1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: >reg 20: [io 0xf500-0xf50f]
pci 0000:00:1f.2: >reg 24: [io 0xf400-0xf40f]
pci 0000:00:1f.3: >[8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: >[8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: >reg 10: [io 0xf200-0xf207]
pci 0000:00:1f.5: >reg 14: [io 0xf100-0xf103]
pci 0000:00:1f.5: >reg 18: [io 0xf000-0xf007]
pci 0000:00:1f.5: >reg 1c: [io 0xef00-0xef03]
pci 0000:00:1f.5: >reg 20: [io 0xee00-0xee0f]
pci 0000:00:1f.5: >reg 24: [io 0xed00-0xed0f]
pci 0000:01:00.0: >[1002:5d4f] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xfdcf0000-0xfdcfffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xae00-0xaeff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.1: >[1002:5d6f] type 00 class 0x038000
pci 0000:01:00.1: >reg 10: [mem 0xfdce0000-0xfdceffff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:01:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: > bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: > bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: > bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: >[10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [io 0xce00-0xceff]
pci 0000:03:00.0: >reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
pci 0000:03:00.0: >reg 20: [mem 0xfdde0000-0xfddeffff 64bit pref]
pci 0000:03:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: >PCI bridge to [bus 03-03]
pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.5: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xd7f50000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd7e90000-0xd7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xd7f50000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0060]
pnp 00:01: >[io 0x0064]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0290-0x0297]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0290-0x0297] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x0400-0x04bf]
system 00:07: >[io 0x0400-0x04bf] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[mem 0xffb80000-0xffbfffff]
pnp 00:08: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:09: >[mem 0xe0000000-0xefffffff]
system 00:09: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x000f0000-0x000fffff]
pnp 00:0a: >[mem 0xd7f00000-0xd7ffffff]
pnp 00:0a: >[mem 0xfed00000-0xfed000ff]
pnp 00:0a: >[mem 0xd7ee0000-0xd7efffff]
pnp 00:0a: >[mem 0x00000000-0x0009ffff]
pnp 00:0a: >[mem 0x00100000-0xd7edffff]
pnp 00:0a: >[mem 0xfec00000-0xfec00fff]
pnp 00:0a: >[mem 0xfed14000-0xfed1dfff]
pnp 00:0a: >[mem 0xfed20000-0xfed9ffff]
pnp 00:0a: >[mem 0xfee00000-0xfee00fff]
pnp 00:0a: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0a: >[mem 0xfff00000-0xffffffff]
pnp 00:0a: >[mem 0x000e0000-0x000effff]
system 00:0a: >[mem 0x000f0000-0x000fffff] could not be reserved
system 00:0a: >[mem 0xd7f00000-0xd7ffffff] could not be reserved
system 00:0a: >[mem 0xfed00000-0xfed000ff] has been reserved
system 00:0a: >[mem 0xd7ee0000-0xd7efffff] could not be reserved
system 00:0a: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: >[mem 0x00100000-0xd7edffff] could not be reserved
system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: >[mem 0xfed14000-0xfed1dfff] has been reserved
system 00:0a: >[mem 0xfed20000-0xfed9ffff] has been reserved
system 00:0a: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0a: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: > bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: > bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: > bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: >BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:1c.5: >PCI bridge to [bus 03-03]
pci 0000:00:1c.5: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.5: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 04-04]
pci 0000:00:1e.0: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xd7f50000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: >resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:01: >resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: >resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: >resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: >resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: >resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: >resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:04: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: >resource 8 [mem 0xd7f50000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd3e8a000-0xd7e89fff] (64MB) mapped at [ffff8800d3e8a000-ffff8800d7e89fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1354301530.188:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7870
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: >irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 14872k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: >version 2.13
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
ata_piix 0000:00:1f.5: >MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: >setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xfdfff000
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000ff00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >UHCI Host Controller
uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: >irq 21, io base 0x0000fe00
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1a.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.2: >setting latency timer to 64
uhci_hcd 0000:00:1a.2: >UHCI Host Controller
uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: >irq 19, io base 0x0000fd00
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1a.2
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000fc00
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: UHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb6: >SerialNumber: 0000:00:1d.0
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000fb00
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: UHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb7: >SerialNumber: 0000:00:1d.1
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000fa00
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: UHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb8: >SerialNumber: 0000:00:1d.2
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:535:899
rtc_cmos 00:04: >setting system clock to 2012-11-30 18:52:11 UTC (1354301531)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-4: >new high-speed USB device number 2 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-4: >New USB device found, idVendor=0409, idProduct=005a
usb 1-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: >USB hub found
hub 1-4:1.0: >4 ports detected
usb 2-2: >new high-speed USB device number 3 using ehci_hcd
usb 2-2: >New USB device found, idVendor=152d, idProduct=2337
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-2: >Product: USB to ATA/ATAPI Bridge
usb 2-2: >Manufacturer: JMicron
usb 2-2: >SerialNumber: 61CF1FFFFFFF
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Refined TSC clocksource calibration: 2493.749 MHz.
Switching to clocksource tsc
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: ATA-8: WDC WD5000AAKS-75V0A0, 05.01D05, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653F, D200, max UDMA/100
ata2.00: applying bridge limits
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA WDC WD5000AAKS-7 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/100
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >CD-ROM TSSTcorp DVD+-RW TS-H653F D200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: >Attached scsi CD-ROM sr0
sr 1:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[114]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: >irq 43 for MSI/MSI-X
r8169 0000:03:00.0: >eth0: RTL8102e at 0xffffc90000642000, 00:25:64:e7:dd:2b, XID 04a00000 IRQ 43
usb 6-1: >new low-speed USB device number 2 using uhci_hcd
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 6-1: >New USB device found, idVendor=0c2e, idProduct=0200
usb 6-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: >Product: Honeywell Scanning and Mobility Scanner
usb 6-1: >Manufacturer: Honeywell Scanning and Mobility
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input2
hid-generic 0003:0C2E:0200.0001: >input,hidraw0: USB HID v1.11 Keyboard [Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner] on usb-0000:00:1d.0-1/input0
usb 1-4.2: >new full-speed USB device number 3 using ehci_hcd
usb 1-4.2: >New USB device found, idVendor=413c, idProduct=1003
usb 1-4.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: >Product: Dell USB Keyboard Hub
usb 1-4.2: >Manufacturer: Dell
hub 1-4.2:1.0: >USB hub found
hub 1-4.2:1.0: >3 ports detected
scsi 4:0:0:0: >Direct-Access TOSHIBA MK5076GSX PQ: 0 ANSI: 2 CCS
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:0: >[sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: >[sdb] Write Protect is off
sd 4:0:0:0: >[sdb] Mode Sense: 28 00 00 00
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
usb 1-4.2.1: >new full-speed USB device number 4 using ehci_hcd
sdb: sdb1 sdb2 sdb3 sdb4
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] Attached SCSI disk
usb 1-4.2.1: >New USB device found, idVendor=413c, idProduct=2010
usb 1-4.2.1: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.1: >Product: Dell USB Keyboard
usb 1-4.2.1: >Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.0/input/input3
hid-generic 0003:413C:2010.0002: >input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.1/input/input4
hid-generic 0003:413C:2010.0003: >input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input1
usb 1-4.2.3: >new low-speed USB device number 5 using ehci_hcd
usb 1-4.2.3: >New USB device found, idVendor=045e, idProduct=0040
usb 1-4.2.3: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.3: >Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-4.2.3: >Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input5
hid-generic 0003:045E:0040.0004: >input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-4.2.3/input0
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4191228k swap on /dev/sda5. Priority:-1 extents:1 across:4191228k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[351]: starting version 175
[drm] Initialized drm 1.1.0 20060810
lp: driver loaded but no devices found
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (R423 0x1002:0x5D4F 0x174B:0x1600).
[drm] register mmio base: 0xFDCF0000
[drm] register mmio size: 65536
ATOM BIOS: RADEON
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: >VRAM: 256M 0x00000000D8000000 - 0x00000000E7FFFFFF (256M used)
radeon 0000:01:00.0: >GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: >irq 44 for MSI/MSI-X
radeon 0000:01:00.0: >radeon: using MSI.
[drm] radeon: irq initialized.
mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=256M, BAR=128M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2024004 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000D8040000).
[drm] radeon: 3 quad pipes, 1 z pipes initialized.
radeon 0000:01:00.0: >WB enabled
radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x00000000b8000000 and cpu addr 0xffff88011f03a000
[drm] Loading R400 Microcode
snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000480-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000480-0x00000000000004bf SystemIO conflicts with Region \GPO_ 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
dcdbas dcdbas: >Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[drm] radeon: ring at 0x00000000B8001000
[drm] ring test succeeded in 0 usecs
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] fb mappable at 0xD80C0000
[drm] vram apper at 0xD8000000
[drm] size 7680000
[drm] fb depth is 24
[drm] pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (653) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
r8169 0000:03:00.0: >eth0: link down
r8169 0000:03:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Netfilter messages via NETLINK v0.30.
device eth0 entered promiscuous mode
r8169 0000:03:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-4: >USB disconnect, device number 2
usb 1-4.2: >USB disconnect, device number 3
usb 1-4.2.1: >USB disconnect, device number 4
usb 1-4.2.3: >USB disconnect, device number 5
usb 1-4: >new high-speed USB device number 6 using ehci_hcd
usb 1-4: >New USB device found, idVendor=0409, idProduct=005a
usb 1-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: >USB hub found
hub 1-4:1.0: >4 ports detected
usb 1-4.2: >new full-speed USB device number 7 using ehci_hcd
usb 1-4.2: >New USB device found, idVendor=413c, idProduct=1003
usb 1-4.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: >Product: Dell USB Keyboard Hub
usb 1-4.2: >Manufacturer: Dell
hub 1-4.2:1.0: >USB hub found
hub 1-4.2:1.0: >3 ports detected
usb 1-4.2.1: >new full-speed USB device number 8 using ehci_hcd
usb 1-4.2.1: >New USB device found, idVendor=413c, idProduct=2010
usb 1-4.2.1: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.1: >Product: Dell USB Keyboard
usb 1-4.2.1: >Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.0/input/input14
hid-generic 0003:413C:2010.0005: >input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.1/input/input15
hid-generic 0003:413C:2010.0006: >input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input1
usb 1-4.2.3: >new low-speed USB device number 9 using ehci_hcd
usb 1-4.2.3: >New USB device found, idVendor=045e, idProduct=0040
usb 1-4.2.3: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.3: >Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-4.2.3: >Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input16
hid-generic 0003:045E:0040.0007: >input,hidraw3: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-4.2.3/input0
usb 2-2: >USB disconnect, device number 3
usb 6-1: >USB disconnect, device number 2
usb 1-4: >USB disconnect, device number 6
usb 1-4.2: >USB disconnect, device number 7
usb 1-4.2.1: >USB disconnect, device number 8
usb 1-4.2.3: >USB disconnect, device number 9
usb 1-4: >new high-speed USB device number 10 using ehci_hcd
usb 1-4: >New USB device found, idVendor=0409, idProduct=005a
usb 1-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: >USB hub found
hub 1-4:1.0: >4 ports detected
usb 1-4.2: >new full-speed USB device number 11 using ehci_hcd
usb 1-4.2: >New USB device found, idVendor=413c, idProduct=1003
usb 1-4.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: >Product: Dell USB Keyboard Hub
usb 1-4.2: >Manufacturer: Dell
hub 1-4.2:1.0: >USB hub found
hub 1-4.2:1.0: >3 ports detected
usb 1-4.2.1: >new full-speed USB device number 12 using ehci_hcd
usb 1-4.2.1: >New USB device found, idVendor=413c, idProduct=2010
usb 1-4.2.1: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.1: >Product: Dell USB Keyboard
usb 1-4.2.1: >Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.0/input/input17
hid-generic 0003:413C:2010.0008: >input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.1/input/input18
hid-generic 0003:413C:2010.0009: >input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input1
usb 1-4.2.3: >new low-speed USB device number 13 using ehci_hcd
usb 1-4.2.3: >New USB device found, idVendor=045e, idProduct=0040
usb 1-4.2.3: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.3: >Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-4.2.3: >Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input19
hid-generic 0003:045E:0040.000A: >input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-4.2.3/input0
usb 1-4: >USB disconnect, device number 10
usb 1-4.2: >USB disconnect, device number 11
usb 1-4.2.1: >USB disconnect, device number 12
usb 1-4.2.3: >USB disconnect, device number 13
usb 1-4: >new high-speed USB device number 14 using ehci_hcd
usb 1-4: >New USB device found, idVendor=0409, idProduct=005a
usb 1-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: >USB hub found
hub 1-4:1.0: >4 ports detected
usb 1-4.2: >new full-speed USB device number 15 using ehci_hcd
usb 1-4.2: >New USB device found, idVendor=413c, idProduct=1003
usb 1-4.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: >Product: Dell USB Keyboard Hub
usb 1-4.2: >Manufacturer: Dell
hub 1-4.2:1.0: >USB hub found
hub 1-4.2:1.0: >3 ports detected
usb 1-4.2.1: >new full-speed USB device number 16 using ehci_hcd
usb 1-4.2.1: >New USB device found, idVendor=413c, idProduct=2010
usb 1-4.2.1: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.1: >Product: Dell USB Keyboard
usb 1-4.2.1: >Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.0/input/input20
hid-generic 0003:413C:2010.000B: >input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.1/input/input21
hid-generic 0003:413C:2010.000C: >input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input1
usb 1-4.2.3: >new low-speed USB device number 17 using ehci_hcd
usb 1-4.2.3: >New USB device found, idVendor=045e, idProduct=0040
usb 1-4.2.3: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.3: >Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-4.2.3: >Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input22
hid-generic 0003:045E:0040.000D: >input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-4.2.3/input0
usb 1-4: >USB disconnect, device number 14
usb 1-4.2: >USB disconnect, device number 15
usb 1-4.2.1: >USB disconnect, device number 16
usb 1-4.2.3: >USB disconnect, device number 17
usb 1-4: >new high-speed USB device number 18 using ehci_hcd
usb 1-4: >New USB device found, idVendor=0409, idProduct=005a
usb 1-4: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: >USB hub found
hub 1-4:1.0: >4 ports detected
usb 1-4.2: >new full-speed USB device number 19 using ehci_hcd
usb 1-4.2: >New USB device found, idVendor=413c, idProduct=1003
usb 1-4.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: >Product: Dell USB Keyboard Hub
usb 1-4.2: >Manufacturer: Dell
hub 1-4.2:1.0: >USB hub found
hub 1-4.2:1.0: >3 ports detected
usb 1-4.2.1: >new full-speed USB device number 20 using ehci_hcd
usb 1-4.2.1: >New USB device found, idVendor=413c, idProduct=2010
usb 1-4.2.1: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.1: >Product: Dell USB Keyboard
usb 1-4.2.1: >Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.0/input/input23
hid-generic 0003:413C:2010.000E: >input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.1/1-4.2.1:1.1/input/input24
hid-generic 0003:413C:2010.000F: >input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2.1/input1
usb 1-4.2.3: >new low-speed USB device number 21 using ehci_hcd
usb 1-4.2.3: >New USB device found, idVendor=045e, idProduct=0040
usb 1-4.2.3: >New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-4.2.3: >Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 1-4.2.3: >Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input25
hid-generic 0003:045E:0040.0010: >input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-4.2.3/input0
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded