dmesg - test1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-33-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:29:15 UTC 2012 (Ubuntu 3.2.0-33.52-generic 3.2.31)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df7e0000 (usable)
[ 0.000000] BIOS-e820: 00000000df7e0000 - 00000000df7e2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df7e2000 - 00000000df7f0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df7f0000 - 00000000df800000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3L/P55-UD3L, BIOS FI 11/01/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask FE0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 512MB, type WB
[ 0.000000] total RAM covered: 8192M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f53f0] f53f0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df7e0000
[ 0.000000] 0000000000 - 00df600000 page 2M
[ 0.000000] 00df600000 - 00df7e0000 page 4k
[ 0.000000] kernel direct mapping tables up to df7e0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ df7d6000-df7e0000
[ 0.000000] RAMDISK: 364d4000 - 37262000
[ 0.000000] ACPI: RSDP 00000000000f6db0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000df7e2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000df7e20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000df7e2180 0500A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000df7e0000 00040
[ 0.000000] ACPI: HPET 00000000df7e7300 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000df7e7380 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000df7e73c0 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000df7e7920 00892 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000df7e7200 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000df7e81c0 01624 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000df7e0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2094959
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 895008 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df7e0000 - 00000000df7e2000
[ 0.000000] PM: Registered nosave memory: 00000000df7e2000 - 00000000df7f0000
[ 0.000000] PM: Registered nosave memory: 00000000df7f0000 - 00000000df800000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:10800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060138
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8152084k/8912896k available (6561k kernel code, 533060k absent, 227752k reserved, 6642k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2798.272 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5596.54 BogoMIPS (lpj=11193088)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000042] AppArmor: AppArmor initialized
[ 0.000044] Yama: becoming mindful.
[ 0.000532] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001914] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002537] Mount-cache hash table entries: 256
[ 0.002633] Initializing cgroup subsys cpuacct
[ 0.002639] Initializing cgroup subsys memory
[ 0.002645] Initializing cgroup subsys devices
[ 0.002648] Initializing cgroup subsys freezer
[ 0.002651] Initializing cgroup subsys blkio
[ 0.002657] Initializing cgroup subsys perf_event
[ 0.002680] CPU: Physical Processor ID: 0
[ 0.002683] CPU: Processor Core ID: 0
[ 0.002688] mce: CPU supports 9 MCE banks
[ 0.002698] CPU0: Thermal monitoring enabled (TM1)
[ 0.002705] using mwait in idle threads.
[ 0.004362] ACPI: Core revision 20110623
[ 0.008173] ftrace: allocating 27018 entries in 106 pages
[ 0.014889] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054473] CPU0: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.161005] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.161013] ... version: 3
[ 0.161015] ... bit width: 48
[ 0.161017] ... generic registers: 4
[ 0.161019] ... value mask: 0000ffffffffffff
[ 0.161021] ... max period: 000000007fffffff
[ 0.161023] ... fixed-purpose events: 3
[ 0.161025] ... event mask: 000000070000000f
[ 0.161178] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.161242] Booting Node 0, Processors #1
[ 0.161245] smpboot cpu 1: start_ip = 9a000
[ 0.268836] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.268913] #2
[ 0.268915] smpboot cpu 2: start_ip = 9a000
[ 0.376501] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.376573] #3
[ 0.376575] smpboot cpu 3: start_ip = 9a000
[ 0.484259] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.484290] Brought up 4 CPUs
[ 0.484293] Total of 4 processors activated (22383.91 BogoMIPS).
[ 0.487291] devtmpfs: initialized
[ 0.488137] EVM: security.selinux
[ 0.488139] EVM: security.SMACK64
[ 0.488141] EVM: security.capability
[ 0.488161] PM: Registering ACPI NVS region at df7e0000 (8192 bytes)
[ 0.488811] print_constraints: dummy:
[ 0.488839] RTC time: 18:27:28, date: 11/23/12
[ 0.488865] NET: Registered protocol family 16
[ 0.488939] Trying to unpack rootfs image as initramfs...
[ 0.488950] ACPI: bus type pci registered
[ 0.488997] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.489002] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.495311] PCI: Using configuration type 1 for base access
[ 0.496045] bio: create slab at 0
[ 0.496110] ACPI: Added _OSI(Module Device)
[ 0.496113] ACPI: Added _OSI(Processor Device)
[ 0.496115] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.496118] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.496666] ACPI: EC: Look up EC in DSDT
[ 0.499073] ACPI Warning: Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1 (20110623/tbutils-314)
[ 0.499489] ACPI: Interpreter enabled
[ 0.499493] ACPI: (supports S0 S3 S4 S5)
[ 0.499505] ACPI: Using IOAPIC for interrupt routing
[ 0.502114] ACPI: No dock devices found.
[ 0.502118] HEST: Table not found.
[ 0.502121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.502158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.502236] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.502240] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.502243] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.502246] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.502250] pci_root PNP0A03:00: host bridge window [mem 0xdf800000-0xfebfffff]
[ 0.502262] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600
[ 0.502309] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[ 0.502352] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.502355] pci 0000:00:03.0: PME# disabled
[ 0.502372] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[ 0.502421] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[ 0.502470] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[ 0.502516] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[ 0.502560] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[ 0.502597] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[ 0.502655] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.502673] pci 0000:00:1a.0: reg 10: [mem 0xfbfff000-0xfbfff3ff]
[ 0.502755] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.502758] pci 0000:00:1a.0: PME# disabled
[ 0.502780] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.502793] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.502853] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.502856] pci 0000:00:1b.0: PME# disabled
[ 0.502874] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.502935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.502938] pci 0000:00:1c.0: PME# disabled
[ 0.502958] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.503020] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.503023] pci 0000:00:1c.4: PME# disabled
[ 0.503040] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 0.503102] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.503105] pci 0000:00:1c.5: PME# disabled
[ 0.503129] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.503147] pci 0000:00:1d.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.503229] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.503232] pci 0000:00:1d.0: PME# disabled
[ 0.503249] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.503304] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[ 0.503414] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
[ 0.503428] pci 0000:00:1f.2: reg 10: [io 0xff00-0xff07]
[ 0.503435] pci 0000:00:1f.2: reg 14: [io 0xfe00-0xfe03]
[ 0.503442] pci 0000:00:1f.2: reg 18: [io 0xfd00-0xfd07]
[ 0.503449] pci 0000:00:1f.2: reg 1c: [io 0xfc00-0xfc03]
[ 0.503456] pci 0000:00:1f.2: reg 20: [io 0xfb00-0xfb0f]
[ 0.503463] pci 0000:00:1f.2: reg 24: [io 0xfa00-0xfa0f]
[ 0.503504] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.503517] pci 0000:00:1f.3: reg 10: [mem 0xfbffd000-0xfbffd0ff 64bit]
[ 0.503536] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.503565] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
[ 0.503578] pci 0000:00:1f.5: reg 10: [io 0xf800-0xf807]
[ 0.503585] pci 0000:00:1f.5: reg 14: [io 0xf700-0xf703]
[ 0.503592] pci 0000:00:1f.5: reg 18: [io 0xf600-0xf607]
[ 0.503599] pci 0000:00:1f.5: reg 1c: [io 0xf500-0xf503]
[ 0.503606] pci 0000:00:1f.5: reg 20: [io 0xf400-0xf40f]
[ 0.503613] pci 0000:00:1f.5: reg 24: [io 0xf300-0xf30f]
[ 0.503685] pci 0000:01:00.0: [10de:0e23] type 0 class 0x000300
[ 0.503694] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf7ffffff]
[ 0.503703] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.503712] pci 0000:01:00.0: reg 1c: [mem 0xec000000-0xefffffff 64bit pref]
[ 0.503719] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f]
[ 0.503725] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.503776] pci 0000:01:00.1: [10de:0beb] type 0 class 0x000403
[ 0.503784] pci 0000:01:00.1: reg 10: [mem 0xf9ffc000-0xf9ffffff]
[ 0.508076] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.508081] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.508084] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.508088] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.508123] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.508181] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.508265] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.508325] pci 0000:03:00.0: PME# supported from D3hot
[ 0.508330] pci 0000:03:00.0: PME# disabled
[ 0.508357] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.508379] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07]
[ 0.508392] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03]
[ 0.508405] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07]
[ 0.508417] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.508430] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.508509] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.508523] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.508527] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.508530] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.508585] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.508600] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.508626] pci 0000:04:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.508643] pci 0000:04:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.508714] pci 0000:04:00.0: supports D1 D2
[ 0.508716] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508720] pci 0000:04:00.0: PME# disabled
[ 0.516057] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.516063] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.516069] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.516123] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.516132] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.516134] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.516136] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.516138] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.516140] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xfebfffff] (subtractive decode)
[ 0.516159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.516281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.516306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.516333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.516354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.516412] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.516416] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.516419] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.521626] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.521662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.521696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.521729] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.521763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.521797] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.521832] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.521865] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.521958] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.521963] vgaarb: loaded
[ 0.521965] vgaarb: bridge control possible 0000:01:00.0
[ 0.522038] i2c-core: driver [aat2870] using legacy suspend method
[ 0.522041] i2c-core: driver [aat2870] using legacy resume method
[ 0.522091] SCSI subsystem initialized
[ 0.522130] libata version 3.00 loaded.
[ 0.522163] usbcore: registered new interface driver usbfs
[ 0.522172] usbcore: registered new interface driver hub
[ 0.522187] usbcore: registered new device driver usb
[ 0.522244] PCI: Using ACPI for IRQ routing
[ 0.523536] PCI: Discovered peer bus 3f
[ 0.523562] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600
[ 0.523579] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
[ 0.523595] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
[ 0.523609] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
[ 0.523624] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
[ 0.523638] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
[ 0.523653] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
[ 0.523669] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
[ 0.523683] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
[ 0.523696] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
[ 0.523710] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
[ 0.523725] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
[ 0.523739] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
[ 0.523753] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
[ 0.523766] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
[ 0.524043] PCI: pci_cache_line_size set to 64 bytes
[ 0.524121] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.524123] reserve RAM buffer: 00000000df7e0000 - 00000000dfffffff
[ 0.524191] NetLabel: Initializing
[ 0.524194] NetLabel: domain hash size = 128
[ 0.524195] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.524205] NetLabel: unlabeled traffic allowed by default
[ 0.524260] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.524268] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.524274] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.528026] hpet: hpet2 irq 40 for MSI
[ 0.528239] hpet: hpet3 irq 41 for MSI
[ 0.532112] hpet: hpet4 irq 42 for MSI
[ 0.532153] hpet: hpet5 irq 43 for MSI
[ 0.532173] Switching to clocksource hpet
[ 0.536766] AppArmor: AppArmor Filesystem Enabled
[ 0.536789] pnp: PnP ACPI init
[ 0.536801] ACPI: bus type pnp registered
[ 0.536862] pnp 00:00: [bus 00-3f]
[ 0.536864] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.536866] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.536868] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.536869] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.536871] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.536872] pnp 00:00: [mem 0xdf800000-0xfebfffff window]
[ 0.536916] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.536974] pnp 00:01: [io 0x0010-0x001f]
[ 0.536977] pnp 00:01: [io 0x0022-0x003f]
[ 0.536978] pnp 00:01: [io 0x0044-0x005f]
[ 0.536979] pnp 00:01: [io 0x0062-0x0063]
[ 0.536981] pnp 00:01: [io 0x0065-0x006f]
[ 0.536982] pnp 00:01: [io 0x0074-0x007f]
[ 0.536983] pnp 00:01: [io 0x0091-0x0093]
[ 0.536984] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.536985] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.536987] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.536988] pnp 00:01: [io 0x0290-0x029f]
[ 0.536989] pnp 00:01: [io 0x0800-0x087f]
[ 0.536990] pnp 00:01: [io 0x0290-0x0294]
[ 0.536992] pnp 00:01: [io 0x0880-0x088f]
[ 0.537042] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.537046] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.537049] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.537052] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.537055] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.537059] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.537067] pnp 00:02: [dma 4]
[ 0.537068] pnp 00:02: [io 0x0000-0x000f]
[ 0.537070] pnp 00:02: [io 0x0080-0x0090]
[ 0.537071] pnp 00:02: [io 0x0094-0x009f]
[ 0.537072] pnp 00:02: [io 0x00c0-0x00df]
[ 0.537091] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.537125] pnp 00:03: [irq 0 disabled]
[ 0.537132] pnp 00:03: [irq 8]
[ 0.537133] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.537156] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.537174] pnp 00:04: [io 0x0070-0x0073]
[ 0.537196] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.537201] pnp 00:05: [io 0x0061]
[ 0.537221] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.537227] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.537232] pnp 00:06: [irq 13]
[ 0.537253] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.537478] pnp 00:07: [io 0x0400-0x047f]
[ 0.537479] pnp 00:07: [io 0x0580-0x05ff]
[ 0.537519] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.537523] system 00:07: [io 0x0580-0x05ff] has been reserved
[ 0.537526] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.537647] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[ 0.537688] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.537693] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.537788] pnp 00:09: [mem 0x000cda00-0x000cffff]
[ 0.537789] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 0.537791] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.537792] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.537793] pnp 00:09: [mem 0xdf7e0000-0xdf7effff]
[ 0.537795] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.537796] pnp 00:09: [mem 0x00100000-0xdf7dffff]
[ 0.537797] pnp 00:09: [mem 0xdf7f0000-0xdf7fffff]
[ 0.537799] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.537800] pnp 00:09: [mem 0xfed10000-0xfed1dfff]
[ 0.537801] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.537803] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.537804] pnp 00:09: [mem 0xffb00000-0xffb7ffff]
[ 0.537805] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.537809] pnp 00:09: [mem 0x000e0000-0x000effff]
[ 0.537859] system 00:09: [mem 0x000cda00-0x000cffff] has been reserved
[ 0.537863] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.537866] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.537869] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.537872] system 00:09: [mem 0xdf7e0000-0xdf7effff] could not be reserved
[ 0.537875] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.537879] system 00:09: [mem 0x00100000-0xdf7dffff] could not be reserved
[ 0.537882] system 00:09: [mem 0xdf7f0000-0xdf7fffff] has been reserved
[ 0.537885] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.537888] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.537891] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.537894] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.537897] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.537900] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.537904] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.537907] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.537921] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.537949] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.537954] pnp: PnP ACPI: found 11 devices
[ 0.537956] ACPI: ACPI bus type pnp unregistered
[ 0.544380] PCI: max bus depth: 1 pci_try_num: 2
[ 0.544414] pci 0000:00:1c.5: BAR 14: assigned [mem 0xdf800000-0xdfbfffff]
[ 0.544418] pci 0000:00:1c.4: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.544423] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfe00000-0xdfffffff]
[ 0.544426] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.544430] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.544434] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
[ 0.544438] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.544441] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.544446] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.544450] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.544455] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.544458] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.544463] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfffffff]
[ 0.544468] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.544475] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.544478] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.544483] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.544487] pci 0000:00:1c.4: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.544494] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.544497] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.544502] pci 0000:00:1c.5: bridge window [mem 0xdf800000-0xdfbfffff]
[ 0.544507] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.544513] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.544532] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544537] pci 0000:00:03.0: setting latency timer to 64
[ 0.544541] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.544545] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544550] pci 0000:00:1c.0: setting latency timer to 64
[ 0.544555] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544560] pci 0000:00:1c.4: setting latency timer to 64
[ 0.544567] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.544571] pci 0000:00:1c.5: setting latency timer to 64
[ 0.544577] pci 0000:00:1e.0: setting latency timer to 64
[ 0.544580] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.544582] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.544583] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.544585] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.544587] pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.544588] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.544590] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 0.544592] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.544594] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.544595] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfffffff]
[ 0.544597] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.544599] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.544600] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.544602] pci_bus 0000:03: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.544604] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.544606] pci_bus 0000:04: resource 1 [mem 0xdf800000-0xdfbfffff]
[ 0.544608] pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.544609] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.544611] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.544613] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.544614] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.544616] pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.544618] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 0.544619] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.544646] NET: Registered protocol family 2
[ 0.544790] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.545474] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.547566] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.547824] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.547828] TCP reno registered
[ 0.547838] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.547893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.548003] NET: Registered protocol family 1
[ 0.548039] pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.564136] pci 0000:00:1a.0: PCI INT C disabled
[ 0.564155] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.580089] pci 0000:00:1d.0: PCI INT A disabled
[ 0.580114] pci 0000:01:00.0: Boot video device
[ 0.580145] PCI: CLS 64 bytes, default 64
[ 0.580147] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.580150] Placing 64MB software IO TLB between ffff8800db7d6000 - ffff8800df7d6000
[ 0.580154] software IO TLB at phys 0xdb7d6000 - 0xdf7d6000
[ 0.580509] audit: initializing netlink socket (disabled)
[ 0.580519] type=2000 audit(1353695248.424:1): initialized
[ 0.599181] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.600867] VFS: Disk quotas dquot_6.5.2
[ 0.600908] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.601275] fuse init (API version 7.17)
[ 0.601348] msgmni has been set to 15922
[ 0.601645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.601672] io scheduler noop registered
[ 0.601675] io scheduler deadline registered
[ 0.601699] io scheduler cfq registered (default)
[ 0.601925] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.601942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.601984] intel_idle: MWAIT substates: 0x1120
[ 0.601990] intel_idle: v0.4 model 0x1E
[ 0.601991] intel_idle: lapic_timer_reliable_states 0x2
[ 0.602060] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.602066] ACPI: Power Button [PWRB]
[ 0.602101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.602105] ACPI: Power Button [PWRF]
[ 0.605100] ERST: Table is not found!
[ 0.605103] GHES: HEST is not enabled!
[ 0.692404] Freeing initrd memory: 13880k freed
[ 0.823824] Linux agpgart interface v0.103
[ 0.824935] brd: module loaded
[ 0.825512] loop: module loaded
[ 0.825607] ahci 0000:03:00.0: version 3.0
[ 0.825619] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.839425] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.839437] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.839448] ahci 0000:03:00.0: setting latency timer to 64
[ 0.839683] scsi0 : ahci
[ 0.839746] scsi1 : ahci
[ 0.839802] ata1: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 16
[ 0.839808] ata2: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 16
[ 0.839844] ata_piix 0000:00:1f.2: version 2.13
[ 0.839856] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.839862] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.839893] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.840079] scsi2 : ata_piix
[ 0.840139] scsi3 : ata_piix
[ 0.840417] ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
[ 0.840423] ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
[ 0.840437] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.840442] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.840468] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.840615] scsi4 : ata_piix
[ 0.840679] scsi5 : ata_piix
[ 0.840939] ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.840944] ata6: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.840986] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.840993] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.841015] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.841026] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.841226] Fixed MDIO Bus: probed
[ 0.841240] tun: Universal TUN/TAP device driver, 1.6
[ 0.841242] tun: (C) 1999-2004 Max Krasnyansky
[ 0.841281] PPP generic driver version 2.4.2
[ 0.841363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.841378] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.841391] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.841394] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.841431] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.841456] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.845344] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.845356] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbfff000
[ 0.859347] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.859475] hub 1-0:1.0: USB hub found
[ 0.859480] hub 1-0:1.0: 2 ports detected
[ 0.859529] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.859541] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.859544] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.859582] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.859603] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.863486] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.863497] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffe000
[ 0.879291] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.879412] hub 2-0:1.0: USB hub found
[ 0.879416] hub 2-0:1.0: 2 ports detected
[ 0.879464] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.879475] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.879511] usbcore: registered new interface driver libusual
[ 0.879534] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.912915] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.912918] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.162601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.162679] mousedev: PS/2 mouse device common for all mice
[ 1.162771] rtc_cmos 00:04: RTC can wake from S4
[ 1.162858] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.162884] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.162941] device-mapper: uevent: version 1.0.3
[ 1.162987] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.163064] cpuidle: using governor ladder
[ 1.169268] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.169355] cpuidle: using governor menu
[ 1.169358] EFI Variables Facility v0.08 2004-May-17
[ 1.169519] TCP cubic registered
[ 1.169588] NET: Registered protocol family 10
[ 1.169929] NET: Registered protocol family 17
[ 1.169933] Registering the dns_resolver key type
[ 1.170040] PM: Hibernation image not present or could not be loaded.
[ 1.170048] registered taskstats version 1
[ 1.170507] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.177025] Magic number: 4:595:494
[ 1.177164] rtc_cmos 00:04: setting system clock to 2012-11-23 18:27:29 UTC (1353695249)
[ 1.177728] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.177731] EDD information not available.
[ 1.303063] hub 1-1:1.0: USB hub found
[ 1.303261] hub 1-1:1.0: 6 ports detected
[ 1.314337] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.330241] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.330275] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.331566] ata2.00: ATA-8: ST31000528AS, CC44, max UDMA/133
[ 1.331577] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.333083] ata2.00: configured for UDMA/133
[ 1.338090] ata6.00: HPA detected: current 3907020911, native 3907029168
[ 1.338104] ata6.00: ATA-8: WDC WD20EARX-55PASB0, 51.0AB51, max UDMA/133
[ 1.338112] ata6.00: 3907020911 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.342086] ata1.00: ATA-8: KINGSTON SVP200S37A240G, 502ABBF0, max UDMA/133
[ 1.342098] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.346575] ata6.00: configured for UDMA/133
[ 1.351920] ata1.00: configured for UDMA/133
[ 1.352276] scsi 0:0:0:0: Direct-Access ATA KINGSTON SVP200S 502A PQ: 0 ANSI: 5
[ 1.352467] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.352515] sd 0:0:0:0: [sda] Write Protect is off
[ 1.352518] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.352522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.352535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353089] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC44 PQ: 0 ANSI: 5
[ 1.353276] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.353287] sda: sda1 sda2 < sda5 >
[ 1.353296] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.353623] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.353634] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.353756] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.353867] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.362261] sdb: sdb1
[ 1.363374] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.414075] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.488563] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.488577] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.546667] hub 2-1:1.0: USB hub found
[ 1.546864] hub 2-1:1.0: 8 ports detected
[ 1.577514] Refined TSC clocksource calibration: 2798.010 MHz.
[ 1.577526] Switching to clocksource tsc
[ 1.617562] usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
[ 1.633475] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.633497] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.633514] ata4.01: link offline, clearing class 3 to NONE
[ 1.641531] ata4.00: ATAPI: ATAPI iHAS224 B, GL04, max UDMA/100
[ 1.657614] ata4.00: configured for UDMA/100
[ 1.659741] scsi 3:0:0:0: CD-ROM ATAPI iHAS224 B GL04 PQ: 0 ANSI: 5
[ 1.662603] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.662615] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.662947] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.663131] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.663757] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARX-55P 51.0 PQ: 0 ANSI: 5
[ 1.664069] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.664072] sd 5:0:0:0: [sdc] 3907020911 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.664074] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.664487] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.664497] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.664676] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.678781] sdc: sdc1
[ 1.678792] sdc: p1 size 3907024002 extends beyond EOD, enabling native capacity
[ 1.678963] ata6: hard resetting link
[ 1.817033] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
[ 1.913568] Initializing USB Mass Storage driver...
[ 1.913988] scsi6 : usb-storage 2-1.3:1.0
[ 1.914088] usbcore: registered new interface driver usb-storage
[ 1.914095] USB Mass Storage support registered.
[ 1.984592] usb 2-1.6: new high-speed USB device number 4 using ehci_hcd
[ 2.156007] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.188082] ata6.00: n_sectors mismatch 3907020911 != 3907029168
[ 2.188092] ata6.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 2.205130] ata6.00: configured for UDMA/133
[ 2.205142] ata6: EH complete
[ 2.205340] sd 5:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.205352] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 2.206397] sdc: detected capacity change from 2000394706432 to 2000398934016
[ 2.229299] sdc: sdc1
[ 2.230370] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 2.231689] Freeing unused kernel memory: 924k freed
[ 2.231843] Write protecting the kernel read-only data: 12288k
[ 2.235609] Freeing unused kernel memory: 1612k freed
[ 2.238583] Freeing unused kernel memory: 1196k freed
[ 2.255069] udevd[115]: starting version 175
[ 2.271324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.271345] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.271373] r8169 0000:04:00.0: setting latency timer to 64
[ 2.271422] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 2.273722] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input2
[ 2.274247] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input0
[ 2.275650] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc90000c6e000, 1c:6f:65:4c:dd:43, XID 0c200000 IRQ 45
[ 2.275656] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.276568] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input3
[ 2.278077] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input1
[ 2.278095] usbcore: registered new interface driver usbhid
[ 2.278098] usbhid: USB HID core driver
[ 2.322540] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.792483] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.799264] udevd[485]: starting version 175
[ 2.805428] Adding 8378364k swap on /dev/sda5. Priority:-1 extents:1 across:8378364k SS
[ 2.848149] lp: driver loaded but no devices found
[ 2.851058] it87: Found IT8720F chip at 0x290, revision 8
[ 2.851065] it87: VID is disabled (pins used for GPIO)
[ 2.851075] it87: Routing internal VCCH to in7
[ 2.851079] it87: Beeping is supported
[ 2.900995] EDAC MC: Ver: 2.1.0
[ 2.901708] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 2.901721] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 2.901725] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 2.912537] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.913158] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.913654] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.914276] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.914653] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.914770] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 2.914877] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 2.914983] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 2.919511] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2.921380] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 2.922018] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 2.922807] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 2.947303] nvidia: module license 'NVIDIA' taints kernel.
[ 2.947305] Disabling lock debugging due to kernel taint
[ 2.954377] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.954405] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.955470] scsi7 : pata_jmicron
[ 2.956217] scsi8 : pata_jmicron
[ 2.956626] ata7: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[ 2.956629] ata8: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[ 2.975735] Did not find alt setting 1 for intf 0, config 1
[ 2.977472] type=1400 audit(1353695251.298:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=632 comm="apparmor_parser"
[ 2.977760] type=1400 audit(1353695251.302:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser"
[ 2.977922] type=1400 audit(1353695251.302:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser"
[ 2.978732] type=1400 audit(1353695251.302:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[ 2.979008] type=1400 audit(1353695251.302:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 2.979170] type=1400 audit(1353695251.302:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 2.986259] usblp0: USB Bidirectional printer dev 4 if 2 alt 0 proto 2 vid 0x04A9 pid 0x174E
[ 2.986411] usbcore: registered new interface driver usblp
[ 2.988918] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.988925] nvidia 0000:01:00.0: setting latency timer to 64
[ 2.988929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.989008] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
[ 3.234928] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.281287] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.296034] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.296075] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.296096] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.297710] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.320765] init: failsafe main process (993) killed by TERM signal
[ 3.322359] ppdev: user-space parallel port driver
[ 3.331587] Bluetooth: Core ver 2.16
[ 3.331616] NET: Registered protocol family 31
[ 3.331618] Bluetooth: HCI device and connection manager initialized
[ 3.331620] Bluetooth: HCI socket layer initialized
[ 3.331621] Bluetooth: L2CAP socket layer initialized
[ 3.331625] Bluetooth: SCO socket layer initialized
[ 3.336829] type=1400 audit(1353695251.662:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1093 comm="apparmor_parser"
[ 3.337122] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.337124] Bluetooth: BNEP filters: protocol multicast
[ 3.337179] type=1400 audit(1353695251.662:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1093 comm="apparmor_parser"
[ 3.341614] Bluetooth: RFCOMM TTY layer initialized
[ 3.341619] Bluetooth: RFCOMM socket layer initialized
[ 3.341620] Bluetooth: RFCOMM ver 1.11
[ 3.353626] type=1400 audit(1353695251.678:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1134 comm="apparmor_parser"
[ 3.356395] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 3.357085] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 3.357136] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 3.357179] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.357226] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.357425] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.357427] hda_intel: Disabling MSI
[ 3.357458] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 3.575923] r8169 0000:04:00.0: eth0: link down
[ 3.575929] r8169 0000:04:00.0: eth0: link down
[ 3.576436] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.576645] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.987241] Did not find alt setting 1 for intf 0, config 1
[ 4.108029] vboxdrv: Found 4 processor cores.
[ 4.108430] vboxdrv: fAsync=0 offMin=0x1d7 offMax=0x1185c
[ 4.108474] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 4.108476] vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
[ 4.242502] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.266267] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.290282] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.314141] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.314215] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
[ 4.314407] vboxpci: IOMMU not found (not registered)
[ 4.314520] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[ 4.314676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[ 4.314756] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
[ 4.473079] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 4.473081] vesafb: scrolling: redraw
[ 4.473082] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.476260] vesafb: framebuffer at 0xed000000, mapped to 0xffffc90005e80000, using 5120k, total 5120k
[ 4.476599] Console: switching to colour frame buffer device 160x64
[ 4.495989] fb0: VESA VGA frame buffer device
[ 5.215575] r8169 0000:04:00.0: eth0: link up
[ 5.216115] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.933882] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 5.941847] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 5.952110] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=1
[ 5.957941] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 5.997025] usblp0: removed
[ 6.001810] usblp0: USB Bidirectional printer dev 4 if 2 alt 0 proto 2 vid 0x04A9 pid 0x174E
[ 6.328774] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 6.336713] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 6.336719] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 6.344694] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 7.110753] HDMI: detected monitor SMBX2450
[ 7.110756] at connection type HDMI
[ 7.110760] HDMI: available speakers: FL/FR
[ 7.110768] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 7.110773] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=1
[ 7.118803] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 7.892607] HDMI: detected monitor SMBX2450
[ 7.892609] at connection type HDMI
[ 7.892611] HDMI: available speakers: FL/FR
[ 7.892614] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 7.892642] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 8.666592] HDMI: detected monitor SMBX2450
[ 8.666595] at connection type HDMI
[ 8.666599] HDMI: available speakers: FL/FR
[ 8.666605] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 15.950896] eth0: no IPv6 routers present