dmesg - miniHP_Ubuntu

Return To miniHP_Ubuntu System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-32-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 (Ubuntu 3.2.0-32.51-generic-pae 3.2.30)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
Disabled fast string operations
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000060000000 (usable)
 BIOS-e820: 0000000060000000 - 0000000080000000 (reserved)
 BIOS-e820: 0000000080000000 - 00000000bfd94000 (usable)
 BIOS-e820: 00000000bfd94000 - 00000000bfdbf000 (reserved)
 BIOS-e820: 00000000bfdbf000 - 00000000bfe56000 (usable)
 BIOS-e820: 00000000bfe56000 - 00000000bfebf000 (ACPI NVS)
 BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable)
 BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data)
 BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
 BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fa000000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed21000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fef00000 - 00000000fef10000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Hewlett-Packard Compaq Mini 311-1000/3651, BIOS F.16 11/26/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xbff00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 0FFF00000 mask 0FFF00000 write-protect
  1 base 000000000 mask 080000000 write-back
  2 base 080000000 mask 0C0000000 write-back
  3 base 0BFF00000 mask 0FFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037a00000 page 2M
 0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 3726e000 - 37ff0000
Allocated new RAMDISK: 364ec000 - 3726d3ca
Move RAMDISK from 000000003726e000 - 0000000037fef3c9 to 364ec000 - 3726d3c9
ACPI: RSDP 000fe020 00024 (v02 HP    )
ACPI: XSDT bfefe120 0005C (v01 HPQOEM SLIC-MPC 00000001      01000013)
ACPI: FACP bfefd000 000F4 (v04 HP     SLIC-MPC 00000003 MSFT 01000013)
ACPI: DSDT bfeef000 09C32 (v01 HP     SLIC-MPC F0000000 MSFT 01000013)
ACPI: FACS bfe60000 00040
ACPI: APIC bfefc000 00084 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG bfefb000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: HPET bfefa000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: WDRT bfef9000 00047 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
ACPI: SLIC bfeee000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT bfeed000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
2179MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00037bfe
  HighMem  0x00037bfe -> 0x000bff00
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00060000
    0: 0x00080000 -> 0x000bfd94
    0: 0x000bfdbf -> 0x000bfe56
    0: 0x000bfebf -> 0x000bfeed
    0: 0x000bfeff -> 0x000bff00
On node 0 totalpages: 654825
free_area_init_node: node 0, pgdat c1868a80, node_mem_map f4cec200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 4359 pages used for memmap
  HighMem zone: 422229 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 648682
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 12578560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:000bff00)
Memory: 2557140k/3144704k available (5820k kernel code, 62160k reserved, 2844k data, 740k init, 1706352k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc1877000 - 0xc1930000   ( 740 kB)
      .data : 0xc15af13c - 0xc1876280   (2844 kB)
      .text : 0xc1000000 - 0xc15af13c   (5820 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1600.002 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400008)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26564 entries in 52 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f7512000 soft=f7514000
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
Disabled fast string operations
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (6399.90 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bfe56000 (430080 bytes)
print_constraints: dummy: 
RTC time: 20:49:03, date: 11/11/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bfd97c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT bfd96e10 001C1 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 001C1 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bfd97f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT bfd95f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfa000000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfff00000-0xffffffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
pci 0000:00:03.2: reg 10: [io  0x3080-0x30bf]
pci 0000:00:03.2: reg 20: [io  0x3040-0x307f]
pci 0000:00:03.2: reg 24: [io  0x3000-0x303f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
pci 0000:00:03.5: reg 10: [mem 0xfeb80000-0xfebfffff]
pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xd3108000-0xd3108fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xd3109200-0xd31092ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xd3107000-0xd3107fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
pci 0000:00:06.1: reg 10: [mem 0xd3109100-0xd31091ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
pci 0000:00:08.0: reg 10: [mem 0xd3100000-0xd3103fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
pci 0000:00:0a.0: reg 10: [mem 0xd3106000-0xd3106fff]
pci 0000:00:0a.0: reg 14: [io  0x30e0-0x30e7]
pci 0000:00:0a.0: reg 18: [mem 0xd3109000-0xd31090ff]
pci 0000:00:0a.0: reg 1c: [mem 0xd3109300-0xd310930f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
pci 0000:00:0b.0: reg 10: [io  0x30d8-0x30df]
pci 0000:00:0b.0: reg 14: [io  0x30ec-0x30ef]
pci 0000:00:0b.0: reg 18: [io  0x30d0-0x30d7]
pci 0000:00:0b.0: reg 1c: [io  0x30e8-0x30eb]
pci 0000:00:0b.0: reg 20: [io  0x30c0-0x30cf]
pci 0000:00:0b.0: reg 24: [mem 0xd3104000-0xd3105fff]
pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xfa000000-0xfebfffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0xffffffff] (subtractive decode)
pci 0000:02:00.0: [10de:0876] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io  0x2000-0x207f]
pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:10.0:   bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:10.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:03:00.0: [14e4:4315] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xd3000000-0xd3003fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:15.0: PCI bridge to [bus 03-03]
pci 0000:00:15.0:   bridge window [mem 0xd3000000-0xd30fffff]
pci 0000:00:16.0: PCI bridge to [bus 04-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LX0A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX0B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX0C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX0D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX1A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX1B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX1C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX1D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX2A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX2B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX2C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX2D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX3A] (IRQs 16) *11
ACPI: PCI Interrupt Link [LX3B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX3C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX3D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX4A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX4B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX4C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX4D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX5A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX5B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX5C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX5D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX6A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX6B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX6C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LX6D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LUBC] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LUBD] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [AX0A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX0B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX0C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX0D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX1A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX1B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX1C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX1D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX2A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX2B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX2C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX2D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX3A] (IRQs 16) *0
ACPI: PCI Interrupt Link [AX3B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX3C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX3D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX4A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX4B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX4C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX4D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX5A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX5B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX5C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX5D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX6A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX6B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX6C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AX6D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBB] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBC] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBD] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASMB] (IRQs 16) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 00000000bfd94000 - 00000000bfffffff 
reserve RAM buffer: 00000000bfe56000 - 00000000bfffffff 
reserve RAM buffer: 00000000bfeed000 - 00000000bfffffff 
reserve RAM buffer: 00000000bff00000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0xc0000000-0xf7ffffff window]
pnp 00:00: [mem 0xfa000000-0xfebfffff window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [mem 0xfff00000-0xffffffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0072-0x0080]
pnp 00:01: [io  0x0090-0x009f]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x0380-0x0387]
pnp 00:01: [io  0x1500-0x157f]
pnp 00:01: [io  0x1580-0x15ff]
pnp 00:01: [io  0x1600-0x167f]
pnp 00:01: [io  0x1680-0x16ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x0400-0x047f]
pnp 00:01: [io  0x0480-0x04ff]
pnp 00:01: [io  0x0500-0x057f]
pnp 00:01: [io  0x0580-0x05ff]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0880-0x08ff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:01: [io  0x0380-0x0387] has been reserved
system 00:01: [io  0x1500-0x157f] has been reserved
system 00:01: [io  0x1580-0x15ff] has been reserved
system 00:01: [io  0x1600-0x167f] has been reserved
system 00:01: [io  0x1680-0x16ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0480-0x04ff] has been reserved
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0580-0x05ff] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0880-0x08ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0081-0x008f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x00f0-0x00fe]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x0070-0x0071]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs AUI1101 PNP0f13 (active)
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x000ec000-0x000fffff]
pnp 00:09: [mem 0xf8000000-0xf9ffffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000ec000-0x000fffff] could not be reserved
system 00:09: [mem 0xf8000000-0xf9ffffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:10.0:   bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:10.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 03-03]
pci 0000:00:15.0:   bridge window [mem 0xd3000000-0xd30fffff]
pci 0000:00:16.0: PCI bridge to [bus 04-04]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AX3A] enabled at IRQ 16
pci 0000:00:15.0: PCI INT A -> Link[AX3A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AX4A] enabled at IRQ 16
pci 0000:00:16.0: PCI INT A -> Link[AX4A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:16.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfa000000-0xfebfffff]
pci_bus 0000:00: resource 20 [mem 0xfff00000-0xffffffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: resource 18 [mem 0xc0000000-0xf7ffffff]
pci_bus 0000:01: resource 19 [mem 0xfa000000-0xfebfffff]
pci_bus 0000:01: resource 20 [mem 0xfff00000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd2ffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd3000000-0xd30fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
pci 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:04.0: PCI INT A disabled
ACPI: PCI Interrupt Link [AUBB] enabled at IRQ 22
pci 0000:00:04.1: PCI INT B -> Link[AUBB] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:04.1: PCI INT B disabled
ACPI: PCI Interrupt Link [AUBC] enabled at IRQ 21
pci 0000:00:06.0: PCI INT A -> Link[AUBC] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:06.0: PCI INT A disabled
ACPI: PCI Interrupt Link [AUBD] enabled at IRQ 20
pci 0000:00:06.1: PCI INT B -> Link[AUBD] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:06.1: PCI INT B disabled
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1352666943.784:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1661
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
Marking TSC unstable due to TSC halts in idle states deeper than C2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (69 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
Freeing initrd memory: 13832k freed
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ahci 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part 
ahci 0000:00:0b.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xd3104000 port 0xd3104100 irq 40
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUBB] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xd3109200
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:06.1: PCI INT B -> Link[AUBD] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
ehci_hcd 0000:00:06.1: irq 20, io mem 0xd3109100
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 23, io mem 0xd3108000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:06.0: PCI INT A -> Link[AUBC] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 21, io mem 0xd3107000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  Magic number: 4:766:851
rtc_cmos 00:05: setting system clock to 2012-11-11 20:49:04 UTC (1352666944)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9160314AS, 0005HPM1, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST9160314AS      0005 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-5: new high-speed USB device number 3 using ehci_hcd
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 740k freed
Write protecting the kernel text: 5824k
Write protecting the kernel read-only data: 2376k
NX-protecting the kernel data: 4416k
udevd[97]: starting version 175
usb 1-5: config 1 has an invalid interface number: 1 but max is 0
usb 1-5: config 1 has no interface number 0
usb 3-1: new low-speed USB device number 2 using ohci_hcd
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:0a.0: setting latency timer to 64
input: Areson USB Device as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input5
generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:04.0-1/input0
generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:04.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-2: new high-speed USB device number 2 using ehci_hcd
EXT4-fs (sda7): INFO: recovery required on readonly filesystem
EXT4-fs (sda7): write access will be enabled during recovery
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:26:9e:35:94:3c
forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3
EXT4-fs (sda7): recovery complete
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[384]: starting version 175
Adding 498684k swap on /dev/sda6.  Priority:-1 extents:1 across:498684k 
lp: driver loaded but no devices found
i2c i2c-0: nForce2 SMBus adapter at 0x3040
i2c i2c-1: nForce2 SMBus adapter at 0x3000
wmi: Mapper loaded
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
acpi device:2f: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input6
ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
type=1400 audit(1352663369.018:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=708 comm="apparmor_parser"
type=1400 audit(1352663369.022:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=708 comm="apparmor_parser"
type=1400 audit(1352663369.022:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=708 comm="apparmor_parser"
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam-50 (0408:0ff1)
USB Serial support registered for Qualcomm USB modem
qcserial 1-5:1.1: Qualcomm USB modem converter detected
input: HP Webcam-50 as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-5: Qualcomm USB modem converter now attached to ttyUSB0
usbcore: registered new interface driver qcserial
wl 0000:03:00.0: PCI INT A -> Link[AX3A] -> GSI 16 (level, low) -> IRQ 16
wl 0000:03:00.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APMU] enabled at IRQ 21
nvidia 0000:00:03.5: PCI INT B -> Link[APMU] -> GSI 21 (level, low) -> IRQ 21
nvidia 0000:02:00.0: power state changed by ACPI to D0
nvidia 0000:02:00.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
nvidia 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  304.64  Tue Oct 30 11:09:29 PDT 2012
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
snd_hda_intel 0000:00:08.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
hda_intel: Disabling MSI
snd_hda_intel 0000:00:08.0: setting latency timer to 64
lib80211_crypt: registered algorithm 'TKIP'
input: HP WMI hotkeys as /devices/virtual/input/input8
eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
init: failsafe main process (998) killed by TERM signal
sched: RT throttling activated
udevd[403]: renamed network interface eth1 to eth2
ppdev: user-space parallel port driver
type=1400 audit(1352663372.410:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1085 comm="apparmor_parser"
type=1400 audit(1352663372.422:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1085 comm="apparmor_parser"
type=1400 audit(1352663372.426:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1085 comm="apparmor_parser"
type=1400 audit(1352663372.446:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1084 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1352663372.562:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1112 comm="apparmor_parser"
type=1400 audit(1352663372.566:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1112 comm="apparmor_parser"
type=1400 audit(1352663372.570:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1116 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
forcedeth 0000:00:0a.0: eth0: no link during initialization
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x2f4 offMax=0x2250
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
init: udev-fallback-graphics main process (1231) terminated with status 1
vboxpci: IOMMU not found (not registered)
show_signal_msg: 36 callbacks suppressed
gs[1522]: segfault at 8bc988e4 ip b6fd93e4 sp bf88ef80 error 4 in libgs.so.9.05[b6ef7000+4a5000]
eth2: no IPv6 routers present

Return To miniHP_Ubuntu System Information