dmesg - tiling
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-lowlatency (buildd@batsu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #18-Ubuntu SMP PREEMPT Tue Oct 9 20:04:43 UTC 2012 (Ubuntu 3.5.0-17.18-lowlatency 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000afe8ffff] usable
BIOS-e820: [mem 0x00000000afe90000-0x00000000afeacfff] ACPI data
BIOS-e820: [mem 0x00000000afead000-0x00000000afeaefff] ACPI NVS
BIOS-e820: [mem 0x00000000afeaf000-0x00000000afefefff] reserved
BIOS-e820: [mem 0x00000000aff00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: Acer Aspire 4551 /Aspire 4551 , BIOS V1.04 04/22/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 0000A0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001c0000000 aka 7168M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xafe90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f8080-0x000f808f] mapped at [ffff8800000f8080]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xafe8ffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xafdfffff] page 2M
[mem 0xafe00000-0xafe8ffff] page 4k
kernel direct mapping tables up to 0xafe8ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x1bfffffff]
[mem 0x100000000-0x1bfffffff] page 1G
kernel direct mapping tables up to 0x1bfffffff @ [mem 0xafe8f000-0xafe8ffff]
RAMDISK: [mem 0x362a8000-0x3714bfff]
Reserving 128MB of memory at 736MB for crashkernel (System RAM: 5886MB)
ACPI: RSDP 00000000000f8000 00024 (v02 PTLTD )
ACPI: XSDT 00000000afe9c5dd 0007C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 00000000afeac0b5 000F4 (v03 AMD GUAM 06040000 AMD 000F4240)
ACPI: DSDT 00000000afe9c659 0FA5C (v01 ATI SB800 06040000 MSFT 03000001)
ACPI: FACS 00000000afeaefc0 00040
ACPI: SLIC 00000000afeac21d 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: EINJ 00000000afeac393 001B0 (v01 PTL WHEAPTL 06040000 PTL 00000001)
ACPI: HEST 00000000afeac543 002E4 (v01 PTL WHEAPTL 06040000 PTL 00000001)
ACPI: BERT 00000000afeac827 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
ACPI: SSDT 00000000afeac857 000E1 (v01 wheaos wheaosc 06040000 INTL 20050624)
ACPI: ERST 00000000afeac938 00270 (v01 PTL WHEAPTL 06040000 PTL 00000001)
ACPI: SSDT 00000000afeacba8 00386 (v01 AMD POWERNOW 06040000 AMD 00000001)
ACPI: APIC 00000000afeacf2e 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 00000000afeacf8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 00000000afeacfc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
NODE_DATA [mem 0x1bfffc000-0x1bfffffff]
[ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9a00000-ffff8801bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xafe8ffff]
node 0: [mem 0x100000000-0x1bfffffff]
On node 0 totalpages: 1506845
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 700112 pages, LIFO batch:31
Normal zone: 12288 pages used for memmap
Normal zone: 774144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
ACPI: BIOS IRQ0 pin2 override: forcing polarity to high active.
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20120320/tbutils-323)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
PM: Registered nosave memory: 00000000afe90000 - 00000000afead000
PM: Registered nosave memory: 00000000afead000 - 00000000afeaf000
PM: Registered nosave memory: 00000000afeaf000 - 00000000afeff000
PM: Registered nosave memory: 00000000afeff000 - 00000000aff00000
PM: Registered nosave memory: 00000000aff00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s83904 r8192 d22592 u1048576
pcpu-alloc: s83904 r8192 d22592 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1478167
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ a4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ a4000000
PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000
Memory: 5639500k/7340032k available (6761k kernel code, 1312652k absent, 387880k reserved, 6411k data, 876k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 24117248 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2094.842 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.68 BogoMIPS (lpj=2094842)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00aff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
ftrace: allocating 25103 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II P320 Dual-Core Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
System has AMD C1E enabled
Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 Ok.
Switch to broadcast mode on CPU1
Brought up 2 CPUs
Total of 2 processors activated (8379.36 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xafead000-0xafeaefff] (8192 bytes)
dummy:
RTC time: 16:24:51, date: 11/03/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [1000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, d01fffff]
node 0 link 0: mmio [d0200000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ff7fffff]
TOM2: 00000001c0000000 aka 7168M
bus: [00, 1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x1c0000000-0xfcffffffff]
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 17
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20120320/tbutils-323)
ACPI: OEMN 00000000afeadd60 00024 (v01 AMD NAHP 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: OEMN (null) 00024 (v01 AMD NAHP 00000001 MSFT 03000001)
ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20120320/tbutils-323)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[Firmware Bug]: PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
[Firmware Warn]: HEST: Duplicated hardware error source ID: 9.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xf0000000-0xffffffff]
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: >[1022:9601] type 00 class 0x060000
pci 0000:00:01.0: >[1025:9602] type 01 class 0x060400
pci 0000:00:04.0: >[1022:9604] type 01 class 0x060400
pci 0000:00:04.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: >[1022:9605] type 01 class 0x060400
pci 0000:00:05.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4391] type 00 class 0x010601
pci 0000:00:11.0: >reg 10: [io 0x8440-0x8447]
pci 0000:00:11.0: >reg 14: [io 0x8430-0x8433]
pci 0000:00:11.0: >reg 18: [io 0x8420-0x8427]
pci 0000:00:11.0: >reg 1c: [io 0x8410-0x8413]
pci 0000:00:11.0: >reg 20: [io 0x8400-0x840f]
pci 0000:00:11.0: >reg 24: [mem 0xd0606800-0xd0606bff]
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xd0404000-0xd0404fff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xd0606000-0xd06060ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xd0405000-0xd0405fff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xd0606400-0xd06064ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io 0x8450-0x845f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xd0400000-0xd0403fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:18.0: >[1022:1200] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1201] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1202] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1203] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1204] type 00 class 0x060000
pci 0000:01:05.0: >[1002:9712] type 00 class 0x030000
pci 0000:01:05.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:05.0: >reg 14: [io 0x9000-0x90ff]
pci 0000:01:05.0: >reg 18: [mem 0xd0100000-0xd010ffff]
pci 0000:01:05.0: >reg 24: [mem 0xd0000000-0xd00fffff]
pci 0000:01:05.0: >supports D1 D2
pci 0000:01:05.1: >[1002:970f] type 00 class 0x040300
pci 0000:01:05.1: >reg 10: [mem 0xd0110000-0xd0113fff]
pci 0000:01:05.1: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xd01fffff]
pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: >[14e4:1692] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [mem 0xd0200000-0xd020ffff 64bit]
pci 0000:03:00.0: >PME# supported from D3hot D3cold
pci 0000:00:04.0: >PCI bridge to [bus 03-03]
pci 0000:00:04.0: > bridge window [mem 0xd0200000-0xd02fffff]
pci 0000:06:00.0: >[168c:002a] type 00 class 0x028000
pci 0000:06:00.0: >reg 10: [mem 0xd0300000-0xd030ffff 64bit]
pci 0000:06:00.0: >supports D1
pci 0000:06:00.0: >PME# supported from D0 D1 D3hot
pci 0000:00:05.0: >PCI bridge to [bus 06-06]
pci 0000:00:05.0: > bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:00:14.4: >PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xafe90000-0xafffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c1fff window]
pnp 00:00: >[mem 0x000c2000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c5fff window]
pnp 00:00: >[mem 0x000c6000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000c9fff window]
pnp 00:00: >[mem 0x000ca000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cdfff window]
pnp 00:00: >[mem 0x000ce000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d1fff window]
pnp 00:00: >[mem 0x000d2000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d5fff window]
pnp 00:00: >[mem 0x000d6000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000d9fff window]
pnp 00:00: >[mem 0x000da000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000ddfff window]
pnp 00:00: >[mem 0x000de000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e1fff window]
pnp 00:00: >[mem 0x000e2000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e5fff window]
pnp 00:00: >[mem 0x000e6000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000e9fff window]
pnp 00:00: >[mem 0x000ea000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000edfff window]
pnp 00:00: >[mem 0x000ee000-0x000effff window]
pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xffffffff window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0f50-0x0f51]
pnp 00:01: >[mem 0xfec00000-0xfec00fff]
pnp 00:01: >[mem 0xfee00000-0xfee00fff]
system 00:01: >[io 0x0f50-0x0f51] has been reserved
system 00:01: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0080-0x008f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[io 0x00f0-0x00fe]
pnp 00:03: >[irq 13]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: >[io 0x0070-0x0071]
pnp 00:04: >[irq 8]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0022-0x0023]
pnp 00:06: >[io 0x002e-0x002f]
pnp 00:06: >[io 0x0072-0x0073]
pnp 00:06: >[io 0x0080-0x0081]
pnp 00:06: >[io 0x00b0-0x00b1]
pnp 00:06: >[io 0x00b8]
pnp 00:06: >[io 0x0092]
pnp 00:06: >[io 0x0220-0x022f]
pnp 00:06: >[io 0x040b]
pnp 00:06: >[io 0x04d0-0x04d1]
pnp 00:06: >[io 0x04d6]
pnp 00:06: >[io 0x0530-0x0537]
pnp 00:06: >[io 0x0c00-0x0c01]
pnp 00:06: >[io 0x0c14]
pnp 00:06: >[io 0x0c50-0x0c52]
pnp 00:06: >[io 0x0c6c]
pnp 00:06: >[io 0x0c6f]
pnp 00:06: >[io 0x0cd0-0x0cd1]
pnp 00:06: >[io 0x0cd2-0x0cd3]
pnp 00:06: >[io 0x0cd4-0x0cd5]
pnp 00:06: >[io 0x0cd6-0x0cd7]
pnp 00:06: >[io 0x0cd8-0x0cdf]
pnp 00:06: >[io 0x8000-0x805f]
pnp 00:06: >[io 0x0068-0x006f]
pnp 00:06: >[mem 0xff800000-0xff800fff]
pnp 00:06: >[io 0x8100-0x81ff window]
pnp 00:06: >[io 0x8200-0x82ff window]
pnp 00:06: >[io 0x0f40-0x0f47]
pnp 00:06: >[io 0x087f]
system 00:06: >[io 0x0220-0x022f] has been reserved
system 00:06: >[io 0x040b] has been reserved
system 00:06: >[io 0x04d0-0x04d1] has been reserved
system 00:06: >[io 0x04d6] has been reserved
system 00:06: >[io 0x0530-0x0537] has been reserved
system 00:06: >[io 0x0c00-0x0c01] has been reserved
system 00:06: >[io 0x0c14] has been reserved
system 00:06: >[io 0x0c50-0x0c52] has been reserved
system 00:06: >[io 0x0c6c] has been reserved
system 00:06: >[io 0x0c6f] has been reserved
system 00:06: >[io 0x0cd0-0x0cd1] has been reserved
system 00:06: >[io 0x0cd2-0x0cd3] has been reserved
system 00:06: >[io 0x0cd4-0x0cd5] has been reserved
system 00:06: >[io 0x0cd6-0x0cd7] has been reserved
system 00:06: >[io 0x0cd8-0x0cdf] has been reserved
system 00:06: >[io 0x8000-0x805f] has been reserved
system 00:06: >[io 0x8100-0x81ff window] has been reserved
system 00:06: >[io 0x8200-0x82ff window] has been reserved
system 00:06: >[io 0x0f40-0x0f47] has been reserved
system 00:06: >[io 0x087f] has been reserved
system 00:06: >[mem 0xff800000-0xff800fff] has been reserved
system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: >[mem 0x000e0000-0x000fffff]
pnp 00:07: >[mem 0xffe00000-0xffffffff]
pnp 00:07: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:07: >[mem 0xfec10000-0xfec1001f]
pnp 00:07: >[mem 0xfed00000-0xfed003ff]
pnp 00:07: >[mem 0xfed61000-0xfed613ff]
pnp 00:07: >[mem 0xfed80000-0xfed80fff]
pnp 00:07: >[Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
system 00:07: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: >[mem 0xffe00000-0xffffffff] could not be reserved
system 00:07: >[mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: >[mem 0xfed00000-0xfed003ff] has been reserved
system 00:07: >[mem 0xfed61000-0xfed613ff] has been reserved
system 00:07: >[mem 0xfed80000-0xfed80fff] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
pnp 00:08: >[irq 1]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs SYN1b37 SYN1b00 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xd01fffff]
pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: >PCI bridge to [bus 03-03]
pci 0000:00:04.0: > bridge window [mem 0xd0200000-0xd02fffff]
pci 0000:00:05.0: >PCI bridge to [bus 06-06]
pci 0000:00:05.0: > bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:00:14.4: >PCI bridge to [bus 07-07]
pci_bus 0000:00: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 5 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >resource 6 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >resource 7 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >resource 8 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >resource 9 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >resource 10 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >resource 12 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: >resource 13 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 14 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: >resource 1 [mem 0xd0000000-0xd01fffff]
pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: >resource 1 [mem 0xd0200000-0xd02fffff]
pci_bus 0000:06: >resource 1 [mem 0xd0300000-0xd03fffff]
pci_bus 0000:07: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: >resource 5 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:07: >resource 6 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:07: >resource 7 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:07: >resource 8 [mem 0x000da000-0x000dbfff]
pci_bus 0000:07: >resource 9 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:07: >resource 10 [mem 0x000de000-0x000dffff]
pci_bus 0000:07: >resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:07: >resource 12 [mem 0xf0000000-0xffffffff]
pci_bus 0000:07: >resource 13 [io 0x0000-0x0cf7]
pci_bus 0000:07: >resource 14 [io 0x0d00-0xffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: >MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: >Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ a4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1351959891.289:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 11143
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:04.0: >Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:05.0: >Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (60 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (60 C)
ACPI: Battery Slot [BAT0] (battery present)
ERST: Can not request iomem region for ERST.
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >irq 42 for MSI/MSI-X
ahci 0000:00:11.0: >AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0xd0606800 port 0xd0606900 irq 42
ata2: SATA max UDMA/133 abar m1024@0xd0606800 port 0xd0606980 irq 42
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xd0606000
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-lowlatency ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >5 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 17, io mem 0xd0606400
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-lowlatency ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: >irq 18, io mem 0xd0404000
Freeing initrd memory: 14992k freed
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-lowlatency ohci_hcd
usb usb3: >SerialNumber: 0000:00:12.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >5 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xd0405000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-lowlatency ohci_hcd
usb usb4: >SerialNumber: 0000:00:13.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >5 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:327:438
rtc_cmos 00:04: >setting system clock to 2012-11-03 16:24:52 UTC (1351959892)
powernow-k8: Found 1 AMD Athlon(tm) II P320 Dual-Core Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2100 MHz)
powernow-k8: 1 : pstate 1 (1500 MHz)
powernow-k8: 2 : pstate 2 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI: Battery Slot [BAT0] (battery present)
usb 2-5: >new high-speed USB device number 4 using ehci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Corsair Force 3 SSD, 5.02, max UDMA/133
ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA Corsair Force 3 5.02 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: >[sda] Attached SCSI disk
ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ002J, max UDMA/100
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: >Direct-Access ATA TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: >[sdb] Write Protect is off
sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: >[sdb] Attached SCSI disk
Freeing unused kernel memory: 876k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1420k freed
usb 2-5: >New USB device found, idVendor=04f2, idProduct=b1d8
usb 2-5: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-5: >Product: 1.3M WebCam
usb 2-5: >Manufacturer: Sonix Technology Co., Ltd.
Freeing unused kernel memory: 1144k freed
udevd[105]: starting version 175
tg3.c:v3.123 (March 21, 2012)
tg3 mdio bus: probed
tg3 0000:03:00.0: >eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:a4:54:e7
tg3 0000:03:00.0: >eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
tg3 0000:03:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0: >eth0: dma_rwctrl[76180000] dma_mask[64-bit]
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8450 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8458 irq 15
usb 4-1: >new low-speed USB device number 2 using ohci_hcd
Btrfs loaded
Refined TSC clocksource calibration: 2094.797 MHz.
Switching to clocksource tsc
usb 4-1: >New USB device found, idVendor=04fc, idProduct=05d8
usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: >Product: 2.4G Wireless Optical Combo se
usb 4-1: >Manufacturer: MLK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MLK 2.4G Wireless Optical Combo se as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input5
sunplus 0003:04FC:05D8.0001: >input,hidraw0: USB HID v1.00 Keyboard [MLK 2.4G Wireless Optical Combo se] on usb-0000:00:13.0-1/input0
sunplus 0003:04FC:05D8.0002: >fixing up Sunplus Wireless Desktop report descriptor
input: MLK 2.4G Wireless Optical Combo se as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.1/input/input6
sunplus 0003:04FC:05D8.0002: >input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK 2.4G Wireless Optical Combo se] on usb-0000:00:13.0-1/input1
device label Toshiba devid 1 transid 3762 /dev/sdb4
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-2: >new low-speed USB device number 3 using ohci_hcd
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-2: >New USB device found, idVendor=0b38, idProduct=0010
usb 4-2: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
udevd[375]: starting version 175
lp: driver loaded but no devices found
input: HID 0b38:0010 as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/input/input7
hid-generic 0003:0B38:0010.0003: >input,hidraw2: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:13.0-2/input0
input: HID 0b38:0010 as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/input/input8
hid-generic 0003:0B38:0010.0004: >input,hidraw3: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:13.0-2/input1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
acpi device:41: >registered as cooling_device2
ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3f/LNXVIDEO:02/input/input9
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000008040-0x0000000000008047 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xb88100 already in use
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x1025:0x0372).
[drm] register mmio base: 0xD0100000
[drm] register mmio size: 65536
ATOM BIOS: Acer_JE40HM42DN
radeon 0000:01:05.0: >VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: >GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 2861942 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
Linux video capture interface: v2.00
microcode: CPU0: patch_level=0x010000b6
uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
input: 1.3M WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
acer_wmi: Acer Laptop ACPI-WMI Extras
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: >Atheros AR9280 Rev:2 mem=0xffffc90001800000, irq=17
acer_wmi: Function bitmap for Communication Button: 0x1
acer_wmi: Brightness must be controlled by acpi video driver
device label Toshiba devid 1 transid 3762 /dev/sdb4
btrfs: use lzo compression
btrfs: disk space caching is enabled
input: Acer WMI hotkeys as /devices/virtual/input/input11
input: Acer BMA150 accelerometer as /devices/virtual/input/input12
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
btrfs: bdev /dev/sdb4 errs: wr 0, rd 0, flush 0, corrupt 0, gen 0
psmouse serio1: >synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input15
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000b6
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: >WB enabled
radeon 0000:01:05.0: >fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8801b32ddc00
radeon 0000:01:05.0: >setting latency timer to 64
microcode: CPU1: new patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] radeon: power management initialized
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
init: failsafe main process (927) killed by TERM signal
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0
init: flush-early-job-log main process (933) terminated with status 1
snd_hda_intel 0000:01:05.1: >setting latency timer to 64
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
tg3 0000:03:00.0: >irq 43 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: anacron main process (1116) terminated with status 1
init: atd main process (1102) terminated with status 1
init: atd main process ended, respawning
tg3 0000:03:00.0: >eth0: Link is down
init: plymouth-upstart-bridge main process (951) killed by TERM signal
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x2c9 offMax=0x13eb
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
vboxpci: IOMMU not found (not registered)
init: anacron main process (1504) terminated with status 1
init: anacron main process (2202) terminated with status 1
wlan0: authenticate with c8:3a:35:cd:37:ba
wlan0: send auth to c8:3a:35:cd:37:ba (try 1/3)
wlan0: authenticated
wlan0: associate with c8:3a:35:cd:37:ba (try 1/3)
wlan0: RX AssocResp from c8:3a:35:cd:37:ba (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: plymouth-stop pre-start process (2424) terminated with status 1