dmesg - STEST
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 (Ubuntu 3.2.0-32.51-generic 3.2.30)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-V EVO/USB3, BIOS 2201 05/11/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 364d6000 - 37263000
[ 0.000000] ACPI: RSDP 00000000000fbb90 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 0005C (v01 051112 XSDT1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 051112 FACP1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90450 0E65B (v01 A1638 A1638001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 051112 APIC1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 051112 OEMMCFG 20120511 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 051112 OEMB1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cff9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cff9f9b0 00038 (v01 051112 OEMHPET 20120511 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096922
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061077
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 4810000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8094648k/9175040k available (6560k kernel code, 787352k absent, 293040k reserved, 6639k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.541 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.08 BogoMIPS (lpj=12054164)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004034] AppArmor: AppArmor initialized
[ 0.004035] Yama: becoming mindful.
[ 0.004456] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006385] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007266] Mount-cache hash table entries: 256
[ 0.007359] Initializing cgroup subsys cpuacct
[ 0.007363] Initializing cgroup subsys memory
[ 0.007369] Initializing cgroup subsys devices
[ 0.007370] Initializing cgroup subsys freezer
[ 0.007372] Initializing cgroup subsys blkio
[ 0.007376] Initializing cgroup subsys perf_event
[ 0.007397] tseg: 0000000000
[ 0.007407] CPU: Physical Processor ID: 0
[ 0.007408] CPU: Processor Core ID: 0
[ 0.007409] mce: CPU supports 6 MCE banks
[ 0.007416] using AMD E400 aware idle routine
[ 0.009058] ACPI: Core revision 20110623
[ 0.016008] ftrace: allocating 27014 entries in 106 pages
[ 0.020351] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060665] CPU0: AMD Phenom(tm) II X6 1075T Processor stepping 00
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 95000
[ 0.152024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152038] System has AMD C1E enabled
[ 0.152038] Switch to broadcast mode on CPU1
[ 0.152078] #2
[ 0.152079] smpboot cpu 2: start_ip = 95000
[ 0.244037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244050] Switch to broadcast mode on CPU2
[ 0.244085] #3
[ 0.244085] smpboot cpu 3: start_ip = 95000
[ 0.336061] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336075] Switch to broadcast mode on CPU3
[ 0.336113] #4
[ 0.336114] smpboot cpu 4: start_ip = 95000
[ 0.428071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.428086] Switch to broadcast mode on CPU4
[ 0.428130] #5 Ok.
[ 0.428131] smpboot cpu 5: start_ip = 95000
[ 0.520082] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.520099] Brought up 6 CPUs
[ 0.520100] Total of 6 processors activated (36162.48 BogoMIPS).
[ 0.520097] Switch to broadcast mode on CPU5
[ 0.524151] Switch to broadcast mode on CPU0
[ 0.524189] devtmpfs: initialized
[ 0.525081] EVM: security.selinux
[ 0.525082] EVM: security.SMACK64
[ 0.525083] EVM: security.capability
[ 0.525185] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.528603] print_constraints: dummy:
[ 0.528623] RTC time: 7:45:03, date: 10/16/12
[ 0.528648] NET: Registered protocol family 16
[ 0.528756] node 0 link 0: io port [1000, ffffff]
[ 0.528758] TOM: 00000000d0000000 aka 3328M
[ 0.528760] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.528763] node 0 link 0: mmio [a0000, bffff]
[ 0.528765] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.528767] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.528769] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.528771] TOM2: 0000000230000000 aka 8960M
[ 0.528772] bus: [00, 07] on node 0 link 0
[ 0.528774] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.528775] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.528777] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.528778] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.528779] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.528787] Extended Config Space enabled on 1 nodes
[ 0.528816] ACPI: bus type pci registered
[ 0.528685] Trying to unpack rootfs image as initramfs...
[ 0.528862] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.528865] PCI: not using MMCONFIG
[ 0.528866] PCI: Using configuration type 1 for base access
[ 0.528867] PCI: Using configuration type 1 for extended access
[ 0.529571] bio: create slab at 0
[ 0.529571] ACPI: Added _OSI(Module Device)
[ 0.529571] ACPI: Added _OSI(Processor Device)
[ 0.529571] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.529571] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.529571] ACPI: EC: Look up EC in DSDT
[ 0.529912] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.718865] Freeing initrd memory: 13876k freed
[ 0.752470] ACPI: Interpreter enabled
[ 0.752475] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.752497] ACPI: Using IOAPIC for interrupt routing
[ 0.752514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.753499] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.771973] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.772102] ACPI: No dock devices found.
[ 0.772103] HEST: Table not found.
[ 0.772106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.772236] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.772368] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.772370] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.772372] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.772374] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.772375] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.772377] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.772389] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.772437] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.772465] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.772467] pci 0000:00:02.0: PME# disabled
[ 0.772484] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.772510] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.772512] pci 0000:00:0a.0: PME# disabled
[ 0.772534] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.772547] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.772554] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.772561] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.772568] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.772575] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.772582] pci 0000:00:11.0: reg 24: [mem 0xfbfffc00-0xfbffffff]
[ 0.772625] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.772634] pci 0000:00:12.0: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.772685] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.772699] pci 0000:00:12.2: reg 10: [mem 0xfbfff800-0xfbfff8ff]
[ 0.772758] pci 0000:00:12.2: supports D1 D2
[ 0.772759] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.772762] pci 0000:00:12.2: PME# disabled
[ 0.772777] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.772787] pci 0000:00:13.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.772839] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.772852] pci 0000:00:13.2: reg 10: [mem 0xfbfff400-0xfbfff4ff]
[ 0.772912] pci 0000:00:13.2: supports D1 D2
[ 0.772913] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.772916] pci 0000:00:13.2: PME# disabled
[ 0.772930] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.772983] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.772992] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.772999] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.773006] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.773013] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.773020] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.773047] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.773062] pci 0000:00:14.2: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 0.773110] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.773113] pci 0000:00:14.2: PME# disabled
[ 0.773122] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.773176] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.773207] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.773216] pci 0000:00:14.5: reg 10: [mem 0xfbffc000-0xfbffcfff]
[ 0.773267] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.773320] pci 0000:00:15.0: supports D1 D2
[ 0.773338] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.773390] pci 0000:00:15.1: supports D1 D2
[ 0.773409] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.773419] pci 0000:00:16.0: reg 10: [mem 0xfbff3000-0xfbff3fff]
[ 0.773470] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.773484] pci 0000:00:16.2: reg 10: [mem 0xfbfff000-0xfbfff0ff]
[ 0.773543] pci 0000:00:16.2: supports D1 D2
[ 0.773544] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.773547] pci 0000:00:16.2: PME# disabled
[ 0.773560] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.773573] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.773583] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.773593] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.773605] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.773647] pci 0000:01:00.0: [10de:0dc4] type 0 class 0x000300
[ 0.773656] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.773665] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.773674] pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd5ffffff 64bit pref]
[ 0.773680] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.773687] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
[ 0.773736] pci 0000:01:00.1: [10de:0be9] type 0 class 0x000403
[ 0.773745] pci 0000:01:00.1: reg 10: [mem 0xfea7c000-0xfea7ffff]
[ 0.780071] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.780075] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.780078] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfeafffff]
[ 0.780081] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.780117] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.780131] pci 0000:02:00.0: reg 10: [mem 0xfebfa000-0xfebfbfff 64bit]
[ 0.780201] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.780204] pci 0000:02:00.0: PME# disabled
[ 0.788073] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.788078] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.788129] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.788136] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.788137] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.788139] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.788141] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.788143] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.788145] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.788181] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.788238] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.788254] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.788280] pci 0000:05:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
[ 0.788296] pci 0000:05:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[ 0.788366] pci 0000:05:00.0: supports D1 D2
[ 0.788368] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.788372] pci 0000:05:00.0: PME# disabled
[ 0.796073] pci 0000:00:15.1: PCI bridge to [bus 05-05]
[ 0.796079] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.796084] pci 0000:00:15.1: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.796102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.796239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.796266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.796290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.796340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.796431] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.796527] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.799604] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.799644] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.799682] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.799720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
[ 0.799750] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.799773] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.799796] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.799819] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.799896] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.799896] vgaarb: loaded
[ 0.799896] vgaarb: bridge control possible 0000:01:00.0
[ 0.799896] i2c-core: driver [aat2870] using legacy suspend method
[ 0.799896] i2c-core: driver [aat2870] using legacy resume method
[ 0.800106] SCSI subsystem initialized
[ 0.800143] libata version 3.00 loaded.
[ 0.800143] usbcore: registered new interface driver usbfs
[ 0.800143] usbcore: registered new interface driver hub
[ 0.800143] usbcore: registered new device driver usb
[ 0.800143] PCI: Using ACPI for IRQ routing
[ 0.806401] PCI: pci_cache_line_size set to 64 bytes
[ 0.806457] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.806459] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.806521] NetLabel: Initializing
[ 0.806522] NetLabel: domain hash size = 128
[ 0.806523] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.806531] NetLabel: unlabeled traffic allowed by default
[ 0.806563] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.806563] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.808071] Switching to clocksource hpet
[ 0.812366] AppArmor: AppArmor Filesystem Enabled
[ 0.812381] pnp: PnP ACPI init
[ 0.812391] ACPI: bus type pnp registered
[ 0.812461] pnp 00:00: [bus 00-ff]
[ 0.812463] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.812465] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.812466] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.812467] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.812469] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.812470] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.812472] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.812502] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.812555] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.812557] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.812589] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.812643] pnp 00:02: [dma 4]
[ 0.812644] pnp 00:02: [io 0x0000-0x000f]
[ 0.812646] pnp 00:02: [io 0x0081-0x0083]
[ 0.812647] pnp 00:02: [io 0x0087]
[ 0.812648] pnp 00:02: [io 0x0089-0x008b]
[ 0.812649] pnp 00:02: [io 0x008f]
[ 0.812650] pnp 00:02: [io 0x00c0-0x00df]
[ 0.812670] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.812679] pnp 00:03: [io 0x0070-0x0071]
[ 0.812686] pnp 00:03: [irq 8]
[ 0.812702] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.812708] pnp 00:04: [io 0x0061]
[ 0.812725] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.812731] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.812734] pnp 00:05: [irq 13]
[ 0.812752] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.812781] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.812798] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.813101] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.813104] pnp 00:07: [irq 4]
[ 0.813106] pnp 00:07: [dma 0 disabled]
[ 0.813162] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.813205] pnp 00:08: [io 0x0060]
[ 0.813206] pnp 00:08: [io 0x0064]
[ 0.813207] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.813209] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.813239] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.813241] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.813243] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813328] pnp 00:09: [io 0x0010-0x001f]
[ 0.813329] pnp 00:09: [io 0x0022-0x003f]
[ 0.813330] pnp 00:09: [io 0x0062-0x0063]
[ 0.813331] pnp 00:09: [io 0x0065-0x006f]
[ 0.813333] pnp 00:09: [io 0x0072-0x007f]
[ 0.813335] pnp 00:09: [io 0x0080]
[ 0.813336] pnp 00:09: [io 0x0084-0x0086]
[ 0.813337] pnp 00:09: [io 0x0088]
[ 0.813339] pnp 00:09: [io 0x008c-0x008e]
[ 0.813340] pnp 00:09: [io 0x0090-0x009f]
[ 0.813341] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.813342] pnp 00:09: [io 0x00b1]
[ 0.813343] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.813344] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.813345] pnp 00:09: [io 0x040b]
[ 0.813346] pnp 00:09: [io 0x04d6]
[ 0.813347] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.813348] pnp 00:09: [io 0x0c14]
[ 0.813350] pnp 00:09: [io 0x0c50-0x0c51]
[ 0.813351] pnp 00:09: [io 0x0c52]
[ 0.813352] pnp 00:09: [io 0x0c6c]
[ 0.813353] pnp 00:09: [io 0x0c6f]
[ 0.813354] pnp 00:09: [io 0x0cd0-0x0cd1]
[ 0.813355] pnp 00:09: [io 0x0cd2-0x0cd3]
[ 0.813356] pnp 00:09: [io 0x0cd4-0x0cd5]
[ 0.813357] pnp 00:09: [io 0x0cd6-0x0cd7]
[ 0.813358] pnp 00:09: [io 0x0cd8-0x0cdf]
[ 0.813359] pnp 00:09: [io 0x0b00-0x0b3f]
[ 0.813361] pnp 00:09: [io 0x0800-0x089f]
[ 0.813362] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.813363] pnp 00:09: [io 0x0b00-0x0b1f]
[ 0.813364] pnp 00:09: [io 0x0b20-0x0b3f]
[ 0.813365] pnp 00:09: [io 0x0900-0x090f]
[ 0.813367] pnp 00:09: [io 0x0910-0x091f]
[ 0.813368] pnp 00:09: [io 0xfe00-0xfefe]
[ 0.813369] pnp 00:09: [io 0x0060]
[ 0.813370] pnp 00:09: [io 0x0064]
[ 0.813371] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.813373] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.813374] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.813375] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.813376] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.813432] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.813433] system 00:09: [io 0x040b] has been reserved
[ 0.813435] system 00:09: [io 0x04d6] has been reserved
[ 0.813436] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.813438] system 00:09: [io 0x0c14] has been reserved
[ 0.813439] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.813441] system 00:09: [io 0x0c52] has been reserved
[ 0.813443] system 00:09: [io 0x0c6c] has been reserved
[ 0.813444] system 00:09: [io 0x0c6f] has been reserved
[ 0.813446] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.813447] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.813449] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.813450] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.813452] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.813454] system 00:09: [io 0x0b00-0x0b3f] has been reserved
[ 0.813455] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.813457] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 0.813459] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.813460] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.813462] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.813463] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.813466] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.813467] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.813469] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.813471] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813558] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.813559] pnp 00:0a: [io 0x0230-0x023f]
[ 0.813561] pnp 00:0a: [io 0x0290-0x029f]
[ 0.813562] pnp 00:0a: [io 0x0300-0x030f]
[ 0.813564] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.813594] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.813596] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.813597] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.813599] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.813601] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813620] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.813648] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.813650] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.813707] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.813708] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.813710] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.813711] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.813712] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.813743] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.813745] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.813747] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.813748] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.813750] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.813752] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.813810] pnp: PnP ACPI: found 13 devices
[ 0.813811] ACPI: ACPI bus type pnp unregistered
[ 0.820138] PCI: max bus depth: 1 pci_try_num: 2
[ 0.820159] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.820161] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.820164] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfeafffff]
[ 0.820166] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.820169] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.820171] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.820174] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.820182] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.820189] pci 0000:00:15.1: PCI bridge to [bus 05-05]
[ 0.820191] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.820195] pci 0000:00:15.1: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.820208] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.820211] pci 0000:00:02.0: setting latency timer to 64
[ 0.820215] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.820217] pci 0000:00:0a.0: setting latency timer to 64
[ 0.820226] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.820229] pci 0000:00:15.0: setting latency timer to 64
[ 0.820233] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.820236] pci 0000:00:15.1: setting latency timer to 64
[ 0.820238] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.820240] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.820241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.820243] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.820244] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.820246] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.820247] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.820249] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[ 0.820251] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.820253] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.820254] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.820256] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.820257] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.820259] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.820261] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.820262] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.820264] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.820266] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.820292] NET: Registered protocol family 2
[ 0.820423] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.821277] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.823066] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.823284] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.823286] TCP reno registered
[ 0.823295] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.823334] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.823429] NET: Registered protocol family 1
[ 0.823452] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.704102] pci 0000:00:12.0: PCI INT A disabled
[ 1.704121] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.704170] pci 0000:00:12.2: PCI INT B disabled
[ 1.704175] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.784098] pci 0000:00:13.0: PCI INT A disabled
[ 1.784108] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.784155] pci 0000:00:13.2: PCI INT B disabled
[ 1.784168] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.864103] pci 0000:00:14.5: PCI INT C disabled
[ 1.864115] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.944099] pci 0000:00:16.0: PCI INT A disabled
[ 1.944109] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.944156] pci 0000:00:16.2: PCI INT B disabled
[ 1.944176] pci 0000:01:00.0: Boot video device
[ 1.944190] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.950496] pci 0000:02:00.0: PCI INT A disabled
[ 1.950501] PCI: CLS 64 bytes, default 64
[ 1.951826] PCI-DMA: Disabling AGP.
[ 1.951921] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.951923] PCI-DMA: using GART IOMMU.
[ 1.951925] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.955001] IBS: LVT offset 1 assigned
[ 1.955037] perf: AMD IBS detected (0x0000001f)
[ 1.955160] audit: initializing netlink socket (disabled)
[ 1.955173] type=2000 audit(1350373503.948:1): initialized
[ 1.971084] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.972948] VFS: Disk quotas dquot_6.5.2
[ 1.972981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.973352] fuse init (API version 7.17)
[ 1.973409] msgmni has been set to 15965
[ 1.973748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.973777] io scheduler noop registered
[ 1.973778] io scheduler deadline registered
[ 1.973797] io scheduler cfq registered (default)
[ 1.973914] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.973941] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.974035] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.974054] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.974134] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.974167] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X
[ 1.974248] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.974280] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X
[ 1.974354] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.974356] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.974358] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.974360] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.974370] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.974372] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.974374] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.974387] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.974390] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.974403] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.974405] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.974412] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.974424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.974442] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.974542] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.974546] ACPI: Power Button [PWRB]
[ 1.974577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.974579] ACPI: Power Button [PWRF]
[ 1.974626] ACPI: processor limited to max C-state 1
[ 1.976966] ERST: Table is not found!
[ 1.976967] GHES: HEST is not enabled!
[ 1.997411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.192640] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.236279] Linux agpgart interface v0.103
[ 2.237270] brd: module loaded
[ 2.237788] loop: module loaded
[ 2.237941] ahci 0000:00:11.0: version 3.0
[ 2.237954] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.238048] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.238051] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.238477] scsi0 : ahci
[ 2.238538] scsi1 : ahci
[ 2.238587] scsi2 : ahci
[ 2.238636] scsi3 : ahci
[ 2.238663] ata1: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 19
[ 2.238666] ata2: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 19
[ 2.238668] ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 19
[ 2.238670] ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 19
[ 2.238828] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.238852] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 2.239139] Fixed MDIO Bus: probed
[ 2.239152] tun: Universal TUN/TAP device driver, 1.6
[ 2.239154] tun: (C) 1999-2004 Max Krasnyansky
[ 2.239210] PPP generic driver version 2.4.2
[ 2.239294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.239352] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.239364] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.239404] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.239410] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.239424] QUIRK: Enable AMD PLL fix
[ 2.239432] ehci_hcd 0000:00:12.2: debug port 1
[ 2.239447] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbfff800
[ 2.248091] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.248198] hub 1-0:1.0: USB hub found
[ 2.248201] hub 1-0:1.0: 5 ports detected
[ 2.248322] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.248334] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.248377] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.248383] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.248400] ehci_hcd 0000:00:13.2: debug port 1
[ 2.248409] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfbfff400
[ 2.260090] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.260187] hub 2-0:1.0: USB hub found
[ 2.260190] hub 2-0:1.0: 5 ports detected
[ 2.260328] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.260340] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.260378] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.260384] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.260400] ehci_hcd 0000:00:16.2: debug port 1
[ 2.260409] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfbfff000
[ 2.272090] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.272184] hub 3-0:1.0: USB hub found
[ 2.272187] hub 3-0:1.0: 4 ports detected
[ 2.272283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.272344] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.272356] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.272391] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.272410] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfbffe000
[ 2.330178] hub 4-0:1.0: USB hub found
[ 2.330183] hub 4-0:1.0: 5 ports detected
[ 2.330306] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.330317] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.330363] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.330376] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffd000
[ 2.386177] hub 5-0:1.0: USB hub found
[ 2.386182] hub 5-0:1.0: 5 ports detected
[ 2.386306] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.386318] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.386353] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.386366] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbffc000
[ 2.442177] hub 6-0:1.0: USB hub found
[ 2.442182] hub 6-0:1.0: 2 ports detected
[ 2.442304] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.442316] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.442351] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.442364] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfbff3000
[ 2.498201] hub 7-0:1.0: USB hub found
[ 2.498206] hub 7-0:1.0: 4 ports detected
[ 2.498270] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.498358] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.498372] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.498374] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.498418] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.498527] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfebfa000
[ 2.498562] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.498567] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.498571] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.498575] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.498577] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.498580] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 2.498583] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 2.498718] xHCI xhci_add_endpoint called for root hub
[ 2.498719] xHCI xhci_check_bandwidth called for root hub
[ 2.498735] hub 8-0:1.0: USB hub found
[ 2.498739] hub 8-0:1.0: 2 ports detected
[ 2.498772] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.498799] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.501960] xHCI xhci_add_endpoint called for root hub
[ 2.501961] xHCI xhci_check_bandwidth called for root hub
[ 2.501975] hub 9-0:1.0: USB hub found
[ 2.501982] hub 9-0:1.0: 2 ports detected
[ 2.544158] usbcore: registered new interface driver libusual
[ 2.544186] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.544512] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.544517] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.544626] mousedev: PS/2 mouse device common for all mice
[ 2.544729] rtc_cmos 00:03: RTC can wake from S4
[ 2.544801] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.544820] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.544868] device-mapper: uevent: version 1.0.3
[ 2.544911] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 2.544916] cpuidle: using governor ladder
[ 2.544918] cpuidle: using governor menu
[ 2.544919] EFI Variables Facility v0.08 2004-May-17
[ 2.545056] TCP cubic registered
[ 2.545115] NET: Registered protocol family 10
[ 2.545405] NET: Registered protocol family 17
[ 2.545408] Registering the dns_resolver key type
[ 2.545516] PM: Hibernation image not present or could not be loaded.
[ 2.545523] registered taskstats version 1
[ 2.550854] Magic number: 0:204:774
[ 2.550883] mem zero: hash matches
[ 2.550970] rtc_cmos 00:03: setting system clock to 2012-10-16 07:45:05 UTC (1350373505)
[ 2.550991] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) (version 2.20.00)
[ 2.551003] powernow-k8: Core Performance Boosting: on.
[ 2.551033] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 2.551034] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 2.551036] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 2.551037] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.551637] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.551639] EDD information not available.
[ 2.552062] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.556116] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.684086] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 2.728117] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.728138] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.728352] ata1.00: ATA-7: INTEL SSDSA2M120G2GC, 2CV102M3, max UDMA/133
[ 2.728355] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.728598] ata1.00: configured for UDMA/133
[ 2.728747] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M120 2CV1 PQ: 0 ANSI: 5
[ 2.728866] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.728896] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.729056] sd 0:0:0:0: [sda] Write Protect is off
[ 2.729058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.729092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.729552] sda: sda1 sda2
[ 2.729917] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.733849] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.733852] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.739598] ata3.00: configured for UDMA/133
[ 2.739720] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.739833] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.739860] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.739948] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.739951] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.739994] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.809695] sdb: sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.810205] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.811409] Freeing unused kernel memory: 924k freed
[ 2.811580] Write protecting the kernel read-only data: 12288k
[ 2.815380] Freeing unused kernel memory: 1612k freed
[ 2.818557] Freeing unused kernel memory: 1200k freed
[ 2.832209] udevd[154]: starting version 175
[ 2.856412] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.856439] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.856470] r8169 0000:05:00.0: setting latency timer to 64
[ 2.856523] r8169 0000:05:00.0: irq 51 for MSI/MSI-X
[ 2.856836] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc9001178c000, 20:cf:30:f1:1d:8f, XID 0c200000 IRQ 51
[ 2.856838] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.858994] scsi4 : pata_atiixp
[ 2.859109] scsi5 : pata_atiixp
[ 2.859186] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.859188] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.952110] Refined TSC clocksource calibration: 3013.471 MHz.
[ 2.952116] Switching to clocksource tsc
[ 3.032036] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.056350] ata5.01: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.01, max UDMA/133
[ 3.056355] ata5.01: limited to UDMA/33 due to 40-wire cable
[ 3.092361] ata5.01: configured for UDMA/33
[ 3.112049] scsi 4:0:1:0: CD-ROM HL-DT-ST BDDVDRW CH10LS20 1.01 PQ: 0 ANSI: 5
[ 3.126818] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.126820] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.126933] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 3.127005] sr 4:0:1:0: Attached scsi generic sg2 type 5
[ 3.165338] hub 2-1:1.0: USB hub found
[ 3.165426] hub 2-1:1.0: 4 ports detected
[ 3.213176] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.276092] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[ 3.536083] usb 2-4: new high-speed USB device number 4 using ehci_hcd
[ 3.940067] usb 4-3: new full-speed USB device number 2 using ohci_hcd
[ 4.198107] Initializing USB Mass Storage driver...
[ 4.198209] scsi6 : usb-storage 2-4:1.0
[ 4.198259] usbcore: registered new interface driver usb-storage
[ 4.198261] USB Mass Storage support registered.
[ 4.372079] usb 4-5: new low-speed USB device number 3 using ohci_hcd
[ 4.616783] usb 2-1.3: new low-speed USB device number 5 using ehci_hcd
[ 4.788854] usb 2-1.4: new full-speed USB device number 6 using ehci_hcd
[ 5.197312] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 5.198059] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 5.198496] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.198595] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 5.202310] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.202926] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 7.356935] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.389567] Adding 7811068k swap on /dev/sdb5. Priority:-1 extents:1 across:7811068k
[ 8.211830] udevd[546]: starting version 175
[ 8.234214] wmi: Mapper loaded
[ 8.241342] lp: driver loaded but no devices found
[ 8.244312] nvidia: module license 'NVIDIA' taints kernel.
[ 8.244315] Disabling lock debugging due to kernel taint
[ 8.246527] IR NEC protocol handler initialized
[ 8.248333] IR RC5(x) protocol handler initialized
[ 8.250703] IR RC6 protocol handler initialized
[ 8.251588] IR JVC protocol handler initialized
[ 8.256970] IR Sony protocol handler initialized
[ 8.260105] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb2f]
[ 8.260108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.260411] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.260486] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.262621] it913x: Chip Version=01 Chip Type=9135
[ 8.264125] it913x: Dual mode=0 Remote=5 Tuner Type=46
[ 8.265249] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[ 8.265258] MCE: In-kernel MCE decoding enabled.
[ 8.265728] EDAC MC: Ver: 2.1.0
[ 8.267752] AMD64 EDAC driver v3.4.0
[ 8.269543] EDAC amd64: DRAM ECC disabled.
[ 8.269550] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.269551] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.269552] (Note that use of the override may cause unknown side effects.)
[ 8.280989] IR MCE Keyboard/mouse protocol handler initialized
[ 8.283142] lirc_dev: IR Remote Control driver registered, major 251
[ 8.283281] IR LIRC bridge handler initialized
[ 8.302464] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.302472] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.302475] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.302661] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
[ 8.349172] usbcore: registered new interface driver usbserial
[ 8.349185] USB Serial support registered for generic
[ 8.465334] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 8.465428] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-5/input0
[ 8.468234] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[ 8.468323] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.2-1.3/input0
[ 8.468338] usbcore: registered new interface driver usbhid
[ 8.468339] usbhid: USB HID core driver
[ 8.478097] dvb-usb: downloading firmware from file 'dvb-usb-it9137-01.fw'
[ 8.478605] it913x: FRM Starting Firmware Download
[ 8.727803] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.771694] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 8.771772] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 8.771821] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 8.771868] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 8.771915] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 8.771962] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.772020] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.772080] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 8.772339] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.772341] hda_intel: Disabling MSI
[ 8.772367] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 8.784086] it913x: FRM Firmware Download Completed - Resetting Device
[ 8.784564] it913x: Chip Version=01 Chip Type=9135
[ 8.784973] it913x: Firmware Version 204147968
[ 8.821686] dvb-usb: found a 'ITE 9135 Generic' in warm state.
[ 8.821741] dvb-usb: will use the device's hardware PID filter (table count: 31).
[ 8.821961] DVB: registering new adapter (ITE 9135 Generic)
[ 8.912958] DVB: registering adapter 0 frontend 0 (ITE 9135 Generic_1)...
[ 8.996098] Registered IR keymap rc-kworld-315u
[ 8.996165] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-2/rc/rc0/input12
[ 8.996210] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-2/rc/rc0
[ 8.996212] dvb-usb: schedule remote query interval to 250 msecs.
[ 8.996214] dvb-usb: ITE 9135 Generic successfully initialized and connected.
[ 8.996216] it913x: DEV registering device driver
[ 8.996237] usbcore: registered new interface driver it913x
[ 8.996272] usbcore: registered new interface driver usbserial_generic
[ 9.040076] USB Serial support registered for pl2303
[ 9.040098] pl2303 4-3:1.0: pl2303 converter detected
[ 9.061268] usb 4-3: pl2303 converter now attached to ttyUSB0
[ 9.061286] usbcore: registered new interface driver pl2303
[ 9.061287] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 9.458178] type=1400 audit(1350366312.402:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=776 comm="apparmor_parser"
[ 9.458190] type=1400 audit(1350366312.402:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=775 comm="apparmor_parser"
[ 9.458504] type=1400 audit(1350366312.402:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=776 comm="apparmor_parser"
[ 9.458521] type=1400 audit(1350366312.402:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=775 comm="apparmor_parser"
[ 9.458693] type=1400 audit(1350366312.402:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=776 comm="apparmor_parser"
[ 9.458714] type=1400 audit(1350366312.402:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=775 comm="apparmor_parser"
[ 9.570403] type=1400 audit(1350366312.514:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=856 comm="apparmor_parser"
[ 9.570417] type=1400 audit(1350366312.514:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=857 comm="apparmor_parser"
[ 9.708095] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.732063] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.756098] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.780093] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.780171] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 9.780246] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 9.780299] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 9.780350] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 9.858179] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1086
[ 9.858202] usbcore: registered new interface driver usblp
[ 10.556168] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 10.556171] vesafb: scrolling: redraw
[ 10.556174] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 10.563081] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90011b80000, using 5120k, total 5120k
[ 10.563251] Console: switching to colour frame buffer device 160x64
[ 10.563272] fb0: VESA VGA frame buffer device
[ 12.024283] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 12.394608] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 14.804057] init: failsafe main process (990) killed by TERM signal
[ 15.925903] type=1400 audit(1350366318.870:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1062 comm="apparmor_parser"
[ 15.926246] type=1400 audit(1350366318.870:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1062 comm="apparmor_parser"
[ 15.926437] type=1400 audit(1350366318.870:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1062 comm="apparmor_parser"
[ 15.960480] type=1400 audit(1350366318.906:13): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1060 comm="apparmor_parser"
[ 15.962078] type=1400 audit(1350366318.906:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1068 comm="apparmor_parser"
[ 15.981035] type=1400 audit(1350366318.926:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1061 comm="apparmor_parser"
[ 16.029320] type=1400 audit(1350366318.974:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1065 comm="apparmor_parser"
[ 16.029713] type=1400 audit(1350366318.974:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1065 comm="apparmor_parser"
[ 16.076341] type=1400 audit(1350366319.022:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1063 comm="apparmor_parser"
[ 16.080423] type=1400 audit(1350366319.026:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1063 comm="apparmor_parser"
[ 17.131331] ppdev: user-space parallel port driver
[ 22.071456] init: gdm main process (1486) killed by TERM signal
[ 31.064809] Bluetooth: Core ver 2.16
[ 31.064828] NET: Registered protocol family 31
[ 31.064829] Bluetooth: HCI device and connection manager initialized
[ 31.064832] Bluetooth: HCI socket layer initialized
[ 31.064833] Bluetooth: L2CAP socket layer initialized
[ 31.064838] Bluetooth: SCO socket layer initialized
[ 35.716590] init: plymouth-stop pre-start process (2167) terminated with status 1
[ 35.754358] Bluetooth: RFCOMM TTY layer initialized
[ 35.754362] Bluetooth: RFCOMM socket layer initialized
[ 35.754364] Bluetooth: RFCOMM ver 1.11
[ 35.956984] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.956986] Bluetooth: BNEP filters: protocol multicast
[ 36.719622] r8169 0000:05:00.0: eth0: link down
[ 36.719639] r8169 0000:05:00.0: eth0: link down
[ 36.720412] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.720605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.386264] r8169 0000:05:00.0: eth0: link up
[ 39.386949] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 49.856024] eth0: no IPv6 routers present