dmesg - resolution_lvm_warmup0001
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-24-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Bochs Bochs, BIOS Bochs 01/01/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x3fffd max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
found SMP MP-table at [ffff8800000fdad0] fdad0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-000000003fffd000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fffd000 page 4k
kernel direct mapping tables up to 3fffd000 @ 1fffd000-20000000
RAMDISK: 364e6000 - 3726b000
ACPI: RSDP 00000000000fd970 00014 (v00 BOCHS )
ACPI: RSDT 000000003fffd7c0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000003fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000003fffd9c0 02571 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 000000003fffff40 00040
ACPI: SSDT 000000003fffd920 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000003fffd840 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000003fffd800 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000003fffd000
Initmem setup node 0 0000000000000000-000000003fffd000
NODE_DATA [000000003fff8000 - 000000003fffcfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1cf9701, boot clock
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0003fffd
On node 0 totalpages: 262026
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 254013 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s83072 r8192 d23424 u2097152
pcpu-alloc: s83072 r8192 d23424 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
kvm-clock: cpu 0, msr 0:3fc13701, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 3fc0ddc0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257925
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1001940k/1048564k available (6567k kernel code, 460k absent, 46164k reserved, 6636k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:256 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2659.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 5319.99 BogoMIPS (lpj=10639992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 10 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20110623
ftrace: allocating 27050 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
Performance Events: Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (5319.99 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 9:48:05, date: 09/23/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1b36:0100] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: reg 14: [mem 0xf0000000-0xf7ffffff]
pci 0000:00:02.0: reg 18: [mem 0xfc024000-0xfc025fff]
pci 0000:00:02.0: reg 1c: [io 0xc060-0xc07f]
pci 0000:00:02.0: reg 30: [mem 0xfc000000-0xfc00ffff pref]
pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [io 0xc080-0xc09f]
pci 0000:00:03.0: reg 14: [mem 0xfc026000-0xfc026fff]
pci 0000:00:03.0: reg 30: [mem 0xfc010000-0xfc01ffff pref]
pci 0000:00:04.0: [8086:2668] type 0 class 0x000403
pci 0000:00:04.0: reg 10: [mem 0xfc020000-0xfc023fff]
pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
pci 0000:00:05.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:05.0: reg 14: [mem 0xfc027000-0xfc027fff]
pci 0000:00:06.0: [1af4:1002] type 0 class 0x000500
pci 0000:00:06.0: reg 10: [io 0xc0a0-0xc0bf]
pci 0000:00:07.0: [1af4:1003] type 0 class 0x000780
pci 0000:00:07.0: reg 10: [io 0xc0c0-0xc0df]
pci 0000:00:07.0: reg 14: [mem 0xfc028000-0xfc028fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000003fffd000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1348393687.108:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1956
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:06.0: setting latency timer to 64
virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:07.0: setting latency timer to 64
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
vda: vda1 vda2 < vda5 >
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata2.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 1.0, max UDMA/100
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing initrd memory: 13844k freed
Magic number: 12:487:829
rtc_cmos 00:01: setting system clock to 2012-09-23 09:48:06 UTC (1348393686)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[84]: starting version 175
FDC 0 is a S82078B
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 2659.968 MHz.
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[322]: starting version 175
Adding 1046524k swap on /dev/vda5. Priority:-1 extents:1 across:1046524k
lp: driver loaded but no devices found
EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1348393692.274:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=630 comm="apparmor_parser"
type=1400 audit(1348393692.274:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=630 comm="apparmor_parser"
virtio-pci 0000:00:07.0: irq 45 for MSI/MSI-X
virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X
type=1400 audit(1348393692.418:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=661 comm="apparmor_parser"
type=1400 audit(1348393692.418:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=661 comm="apparmor_parser"
type=1400 audit(1348393692.418:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=661 comm="apparmor_parser"
init: failsafe main process (713) killed by TERM signal
type=1400 audit(1348393692.714:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=815 comm="apparmor_parser"
type=1400 audit(1348393692.718:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=819 comm="apparmor_parser"
type=1400 audit(1348393692.722:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=819 comm="apparmor_parser"
type=1400 audit(1348393692.722:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=819 comm="apparmor_parser"
type=1400 audit(1348393692.742:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=823 comm="apparmor_parser"
snd_hda_intel 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
snd_hda_intel 0000:00:04.0: irq 47 for MSI/MSI-X
snd_hda_intel 0000:00:04.0: setting latency timer to 64
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
init: alsa-restore main process (894) terminated with status 19
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90000700000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: no IPv6 routers present