dmesg - test2

Return To test2 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-29-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 (Ubuntu 3.2.0-29.46-generic 3.2.24)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
 BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
 BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
 BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
 BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 BIOS-e820: 00000000bf7e8000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: MSI MS-7522/X58A-GD65 (MS-7522)  , BIOS V23.1 03/19/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DFFFF uncachable
  E0000-E3FFF write-protect
  E4000-E7FFF write-through
  E8000-EBFFF write-protect
  EC000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask F00000000 write-back
  2 base 300000000 mask FC0000000 write-back
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0BF800000 mask FFF800000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 20480
init_memory_mapping: 0000000000000000-00000000bf780000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000340000000
 0100000000 - 0340000000 page 2M
kernel direct mapping tables up to 340000000 @ bf772000-bf780000
RAMDISK: 3580a000 - 36bfd000
ACPI: RSDP 00000000000fa1b0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 0003C (v01 7522MS A7522600 20110319 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 7522MS A7522600 20110319 MSFT 00000097)
ACPI: DSDT 00000000bf780480 06E9B (v01  A7522 A7522600 00000600 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 000AC (v01 7522MS A7522600 20110319 MSFT 00000097)
ACPI: MCFG 00000000bf780440 0003C (v01 7522MS OEMMCFG  20110319 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 0007A (v01 7522MS A7522600 20110319 MSFT 00000097)
ACPI: HPET 00000000bf78a480 00038 (v01 7522MS OEMHPET  20110319 MSFT 00000097)
ACPI: SSDT 00000000bf790b90 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000340000000
Initmem setup node 0 0000000000000000-0000000340000000
  NODE_DATA [000000033fffb000 - 000000033fffffff]
 [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x000bf780
    0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143436
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3911 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 763840 pages, LIFO batch:31
  Normal zone: 36864 pages used for memmap
  Normal zone: 2322432 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 12 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7e8000
PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88033fc00000 s83072 r8192 d23424 u131072
pcpu-alloc: s83072 r8192 d23424 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3090183
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12273448k/13631488k available (6555k kernel code, 1057744k absent, 300296k reserved, 6645k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:776 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 3207.953 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6415.90 BogoMIPS (lpj=12831812)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26998 entries in 106 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU         960  @ 3.20GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #2
smpboot cpu 2: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #3
smpboot cpu 3: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #4
smpboot cpu 4: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #5
smpboot cpu 5: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #6
smpboot cpu 6: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #7
smpboot cpu 7: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (51324.66 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bf78e000 (270336 bytes)
print_constraints: dummy: 
RTC time:  6:47:56, date: 09/05/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf78e0c0 0244C (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0244C (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf790510 00678 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00678 (v01  PmRef  P001Cst 00003001 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0x8c00-0x8c1f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0x8880-0x889f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io  0x8800-0x881f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf7dfe000-0xf7dfe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7df8000-0xf7dfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x8480-0x849f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x8400-0x841f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x8080-0x809f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7dfc000-0xf7dfc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x8000-0x8007]
pci 0000:00:1f.2: reg 14: [io  0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18: [io  0x7880-0x7887]
pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io  0x7480-0x749f]
pci 0000:00:1f.2: reg 24: [mem 0xf7df6000-0xf7df67ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf7df5c00-0xf7df5cff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:01:00.0: reg 10: [mem 0xf7efe000-0xf7efffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:02:00.0: [1b4b:9123] type 0 class 0x000106
pci 0000:02:00.0: reg 10: [io  0xac00-0xac07]
pci 0000:02:00.0: reg 14: [io  0xa880-0xa883]
pci 0000:02:00.0: reg 18: [io  0xa800-0xa807]
pci 0000:02:00.0: reg 1c: [io  0xa480-0xa483]
pci 0000:02:00.0: reg 20: [io  0xa400-0xa40f]
pci 0000:02:00.0: reg 24: [mem 0xf7fff800-0xf7ffffff]
pci 0000:02:00.0: reg 30: [mem 0xf7fe0000-0xf7feffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [1b4b:91a4] type 0 class 0x000101
pci 0000:02:00.1: reg 10: [io  0xa080-0xa087]
pci 0000:02:00.1: reg 14: [io  0xa000-0xa003]
pci 0000:02:00.1: reg 18: [io  0x9c00-0x9c07]
pci 0000:02:00.1: reg 1c: [io  0x9880-0x9883]
pci 0000:02:00.1: reg 20: [io  0x9800-0x980f]
pci 0000:02:00.1: reg 24: [mem 0xf7fff400-0xf7fff40f]
pci 0000:02:00.1: reg 30: [mem 0xf7fd0000-0xf7fdffff pref]
pci 0000:02:00.1: PME# supported from D3hot
pci 0000:02:00.1: PME# disabled
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:02.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:03:00.0: [10de:1200] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io  0xbc00-0xbc7f]
pci 0000:03:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
pci 0000:03:00.1: [10de:0e0c] type 0 class 0x000403
pci 0000:03:00.1: reg 10: [mem 0xfbcf8000-0xfbcfbfff]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:06:00.0: reg 10: [io  0xc800-0xc8ff]
pci 0000:06:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
pci 0000:06:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:07:00.0: [197b:2362] type 0 class 0x000106
pci 0000:07:00.0: reg 10: [io  0xdc00-0xdc07]
pci 0000:07:00.0: reg 14: [io  0xd880-0xd883]
pci 0000:07:00.0: reg 18: [io  0xd800-0xd807]
pci 0000:07:00.0: reg 1c: [io  0xd480-0xd483]
pci 0000:07:00.0: reg 20: [io  0xd400-0xd40f]
pci 0000:07:00.0: reg 24: [mem 0xfbdffc00-0xfbdffdff]
pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00
pci 0000:08:02.0: reg 10: [mem 0xfbeff800-0xfbefffff]
pci 0000:08:02.0: reg 14: [io  0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600
pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600
pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600
pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600
pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600
pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600
pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600
pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600
pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600
pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600
pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600
pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600
pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600
pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600
pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600
pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c800 - 000000000009ffff 
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] has been reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0a00-0x0adf]
pnp 00:07: [io  0x0ae0-0x0aef]
system 00:07: [io  0x0a00-0x0adf] has been reserved
system 00:07: [io  0x0ae0-0x0aef] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x002d]
pnp 00:08: [io  0x0030-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x0800-0x087f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed10000-0xfed103ff]
pnp 00:08: [mem 0xfed10400-0xfed107ff]
pnp 00:08: [mem 0xfed10800-0xfed10bff]
pnp 00:08: [mem 0xfed10c00-0xfed10fff]
pnp 00:08: [mem 0xfec8a000-0xfec8a3ff]
pnp 00:08: [mem 0xfec8a400-0xfec8a7ff]
pnp 00:08: [mem 0xfec8a800-0xfec8abff]
pnp 00:08: [mem 0xfec8ac00-0xfec8afff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed45000-0xfed89fff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed40000-0xfed8ffff]
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed103ff] has been reserved
system 00:08: [mem 0xfed10400-0xfed107ff] has been reserved
system 00:08: [mem 0xfed10800-0xfed10bff] has been reserved
system 00:08: [mem 0xfed10c00-0xfed10fff] has been reserved
system 00:08: [mem 0xfec8a000-0xfec8a3ff] has been reserved
system 00:08: [mem 0xfec8a400-0xfec8a7ff] has been reserved
system 00:08: [mem 0xfec8a800-0xfec8abff] has been reserved
system 00:08: [mem 0xfec8ac00-0xfec8afff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xbfffffff]
pnp 00:0c: [mem 0xfed90000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc02fffff pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0300000-0xc06fffff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0700000-0xc08fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0900000-0xc0afffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0:   bridge window [io  0x9000-0xafff]
pci 0000:00:02.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xf8000000-0xfbcfffff]
pci 0000:00:03.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc08fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0900000-0xc0afffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xc0300000-0xc06fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xc0000000-0xc000ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc02fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:02: resource 0 [io  0x9000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xc0700000-0xc08fffff]
pci_bus 0000:05: resource 2 [mem 0xc0900000-0xc0afffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xc0300000-0xc06fffff]
pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc02fffff pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT D disabled
pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: PCI INT A disabled
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb772000 - ffff8800bf772000
software IO TLB at phys 0xbb772000 - 0xbf772000
audit: initializing netlink socket (disabled)
type=2000 audit(1346827675.860:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 23971
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 20428k freed
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6180 irq 43
ata3: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6200 irq 43
ata4: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6280 irq 43
ata5: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6300 irq 43
ata6: SATA max UDMA/133 abar m2048@0xf7df6000 port 0xf7df6380 irq 43
ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: irq 44 for MSI/MSI-X
ahci 0000:02:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq fbs pio 
ahci 0000:02:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fff900 irq 44
ata8: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fff980 irq 44
ata9: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffa00 irq 44
ata10: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffa80 irq 44
ata11: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffb00 irq 44
ata12: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffb80 irq 44
ata13: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffc00 irq 44
ata14: SATA max UDMA/133 abar m2048@0xf7fff800 port 0xf7fffc80 irq 44
ahci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:07:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq led clo pmp pio 
ahci 0000:07:00.0: setting latency timer to 64
scsi14 : ahci
scsi15 : ahci
ata15: SATA max UDMA/133 abar m512@0xfbdffc00 port 0xfbdffd00 irq 17
ata16: SATA max UDMA/133 abar m512@0xfbdffc00 port 0xfbdffd80 irq 17
pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_acpi 0000:02:00.1: setting latency timer to 64
pata_acpi 0000:02:00.1: PCI INT B disabled
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7dfe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7dfc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008c00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008480
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008080
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:01:00.0: setting latency timer to 64
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:01:00.0: irq 16, io mem 0xf7efe000
xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 52 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 10
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 12:263:771
rtc_cmos 00:03: setting system clock to 2012-09-05 06:47:57 UTC (1346827677)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-3: new high-speed USB device number 2 using ehci_hcd
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata8.00: ATA-8: ADATA SSD S511 120GB, 5.0.2a, max UDMA/133
ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-8: ST2000DM001-1CH164, CC43, max UDMA/133
ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
usb 1-4: new high-speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 3207.959 MHz.
Switching to clocksource tsc
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: PIONEER DVD-RW  DVR-219L, 1.02, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-219L 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-6: new high-speed USB device number 4 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-3: new high-speed USB device number 2 using ehci_hcd
Initializing USB Mass Storage driver...
scsi16 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-3.1: new full-speed USB device number 5 using ehci_hcd
usb 1-3.2: new low-speed USB device number 6 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-3.3: new low-speed USB device number 7 using ehci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC43 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sda] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 7:0:0:0: Direct-Access     ATA      ADATA SSD S511 1 5.0. PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 13:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 13:0:0:0: Attached scsi generic sg3 type 3
 sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 6:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1616k freed
Freeing unused kernel memory: 1200k freed
scsi 16:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
scsi 16:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
scsi 16:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
scsi 16:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
sd 16:0:0:0: Attached scsi generic sg4 type 0
sd 16:0:0:1: Attached scsi generic sg5 type 0
sd 16:0:0:2: Attached scsi generic sg6 type 0
sd 16:0:0:3: Attached scsi generic sg7 type 0
udevd[159]: starting version 175
sd 16:0:0:0: [sdc] Attached SCSI removable disk
sd 16:0:0:2: [sde] Attached SCSI removable disk
sd 16:0:0:3: [sdf] Attached SCSI removable disk
sd 16:0:0:1: [sdd] Attached SCSI removable disk
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:06:00.0: setting latency timer to 64
r8169 0000:06:00.0: irq 53 for MSI/MSI-X
r8169 0000:06:00.0: eth0: RTL8168e/8111e at 0xffffc9000187e000, 6c:62:6d:3a:e1:a5, XID 0c200000 IRQ 53
r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.7-3/input1
firewire_ohci 0000:08:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
input: HID 046a:0021 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input2
generic-usb 0003:046A:0021.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:1a.7-3.2/input0
input: HID 046a:0021 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.1/input/input3
generic-usb 0003:046A:0021.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:1a.7-3.2/input1
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.0/input/input4
generic-usb 0003:046D:C00E.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-3.3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
pata_marvell 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_marvell 0000:02:00.1: setting latency timer to 64
scsi17 : pata_marvell
scsi18 : pata_marvell
ata17: PATA max UDMA/100 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 17
ata18: PATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 17
firewire_core: created device fw0: GUID 0010dc0001cd3222, S400
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90012c00000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
Btrfs loaded
device fsid 4b42cacd-3a91-4da6-822f-08e59b1f046d devid 1 transid 19692 /dev/sda6
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[512]: starting version 175
Adding 12578856k swap on /dev/sda7.  Priority:-1 extents:1 across:12578856k 
lp: driver loaded but no devices found
wmi: Mapper loaded
EDAC MC: Ver: 2.1.0
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
f71882fg: Found f71889ed chip at 0xa00, revision 16
f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.2560: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62e0)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
4:3:1: cannot get freq at ep 0x84
usbcore: registered new interface driver snd-usb-audio
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
snd_hda_intel 0000:03:00.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
type=1400 audit(1346827697.061:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=873 comm="apparmor_parser"
type=1400 audit(1346827697.061:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=874 comm="apparmor_parser"
type=1400 audit(1346827697.061:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=873 comm="apparmor_parser"
type=1400 audit(1346827697.061:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=874 comm="apparmor_parser"
type=1400 audit(1346827697.061:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=873 comm="apparmor_parser"
type=1400 audit(1346827697.061:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=874 comm="apparmor_parser"
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2/input17
nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  295.49  Mon Apr 30 23:46:33 PDT 2012
btrfs: use zlib compression
device fsid 4b42cacd-3a91-4da6-822f-08e59b1f046d devid 1 transid 19692 /dev/sda6
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1133) killed by TERM signal
ppdev: user-space parallel port driver
type=1400 audit(1346827704.593:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1230 comm="apparmor_parser"
type=1400 audit(1346827704.593:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1230 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1346827704.913:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1248 comm="apparmor_parser"
type=1400 audit(1346827704.913:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1248 comm="apparmor_parser"
type=1400 audit(1346827704.913:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1248 comm="apparmor_parser"
type=1400 audit(1346827704.913:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1250 comm="apparmor_parser"
type=1400 audit(1346827704.913:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1250 comm="apparmor_parser"
type=1400 audit(1346827704.981:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1251 comm="apparmor_parser"
type=1400 audit(1346827704.981:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1253 comm="apparmor_parser"
type=1400 audit(1346827704.981:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1251 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
r8169 0000:06:00.0: eth0: link down
r8169 0000:06:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:06:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
could not find root 8
could not find root 8
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84
4:3:1: cannot get freq at ep 0x84

Return To test2 System Information