dmesg - tomsbox2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-30-generic-pae (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 (Ubuntu 3.2.0-30.48-generic-pae 3.2.27)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdf3000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA74GM-S2/GA-MA74GM-S2, BIOS FK 08/31/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00CFE00000 mask FFFFE00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 base 0120000000 mask FFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f56c0] f56c0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 364f2000 - 37271000
[ 0.000000] ACPI: RSDP 000f70f0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT cfdf30c0 03E7E (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cfdf0000 00040
[ 0.000000] ACPI: SSDT cfdf7000 0030E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET cfdf7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG cfdf7380 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC cfdf6f40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3972MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfdf0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047935
[ 0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f3ef2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7945 pages used for memmap
[ 0.000000] HighMem zone: 811753 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7b000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038206
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 19922688 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00130000)
[ 0.000000] Memory: 4107860k/4980736k available (5818k kernel code, 83880k reserved, 2846k data, 740k init, 3278792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1877000 - 0xc1930000 ( 740 kB)
[ 0.000000] .data : 0xc15ae87c - 0xc1876280 (2846 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15ae87c (5818 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.511 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.02 BogoMIPS (lpj=12054044)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004032] Security Framework initialized
[ 0.004050] AppArmor: AppArmor initialized
[ 0.004052] Yama: becoming mindful.
[ 0.004105] Mount-cache hash table entries: 512
[ 0.004229] Initializing cgroup subsys cpuacct
[ 0.004235] Initializing cgroup subsys memory
[ 0.004243] Initializing cgroup subsys devices
[ 0.004245] Initializing cgroup subsys freezer
[ 0.004247] Initializing cgroup subsys blkio
[ 0.004254] Initializing cgroup subsys perf_event
[ 0.004273] CPU: Physical Processor ID: 0
[ 0.004275] CPU: Processor Core ID: 0
[ 0.004278] mce: CPU supports 5 MCE banks
[ 0.004286] using AMD E400 aware idle routine
[ 0.005899] ACPI: Core revision 20110623
[ 0.012028] ftrace: allocating 26555 entries in 52 pages
[ 0.016068] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016650] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f74ba000 soft=f74bc000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.144109] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144127] Brought up 2 CPUs
[ 0.144130] Total of 2 processors activated (12053.61 BogoMIPS).
[ 0.144722] devtmpfs: initialized
[ 0.144722] EVM: security.selinux
[ 0.144722] EVM: security.SMACK64
[ 0.144722] EVM: security.capability
[ 0.144722] PM: Registering ACPI NVS region at cfdf0000 (12288 bytes)
[ 0.144868] print_constraints: dummy:
[ 0.144897] RTC time: 22:24:20, date: 08/30/12
[ 0.144930] NET: Registered protocol family 16
[ 0.144954] Trying to unpack rootfs image as initramfs...
[ 0.145045] EISA bus registered
[ 0.145049] node 0 link 0: io port [c000, ffff]
[ 0.145051] TOM: 00000000d0000000 aka 3328M
[ 0.145054] node 0 link 0: mmio [a0000, bffff]
[ 0.145056] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.145059] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.145061] node 0 link 0: mmio [e0000000, e03fffff]
[ 0.145063] TOM2: 0000000130000000 aka 4864M
[ 0.145065] bus: [00, 03] on node 0 link 0
[ 0.145067] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.145069] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.145071] bus: 00 index 2 [mem 0xd0000000-0xefffffff]
[ 0.145073] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.145075] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.145088] ACPI: bus type pci registered
[ 0.145140] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.145143] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.145144] PCI: Using MMCONFIG for extended config space
[ 0.145146] PCI: Using configuration type 1 for base access
[ 0.146174] bio: create slab at 0
[ 0.146247] ACPI: Added _OSI(Module Device)
[ 0.146248] ACPI: Added _OSI(Processor Device)
[ 0.146250] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146252] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146780] ACPI: EC: Look up EC in DSDT
[ 0.150804] ACPI: Interpreter enabled
[ 0.150814] ACPI: (supports S0 S3 S4 S5)
[ 0.150830] ACPI: Using IOAPIC for interrupt routing
[ 0.269708] ACPI: No dock devices found.
[ 0.269710] HEST: Table not found.
[ 0.269714] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.269762] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.269862] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.269864] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.269866] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.269869] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.269871] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.269882] pci 0000:00:00.0: [1002:7911] type 0 class 0x000600
[ 0.269907] pci 0000:00:02.0: [1002:7913] type 1 class 0x000604
[ 0.269935] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.269938] pci 0000:00:02.0: PME# disabled
[ 0.269953] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604
[ 0.269980] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.269983] pci 0000:00:06.0: PME# disabled
[ 0.270012] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.270032] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.270041] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.270051] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.270061] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.270070] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.270080] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.270100] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.270148] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.270161] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.270226] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.270240] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.270310] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.270329] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.270412] pci 0000:00:12.2: supports D1 D2
[ 0.270413] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.270417] pci 0000:00:12.2: PME# disabled
[ 0.270438] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.270452] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.270516] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.270529] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.270599] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.270619] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.270701] pci 0000:00:13.2: supports D1 D2
[ 0.270703] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.270707] pci 0000:00:13.2: PME# disabled
[ 0.270731] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.270830] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.270847] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.270856] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.270866] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.270875] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.270885] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.270941] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.271017] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.271061] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.271075] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.271142] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.271158] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.271171] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.271184] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.271235] pci 0000:01:00.0: [1002:6739] type 0 class 0x000300
[ 0.271249] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271261] pci 0000:01:00.0: reg 18: [mem 0xfdec0000-0xfdedffff 64bit]
[ 0.271269] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 0.271282] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.271316] pci 0000:01:00.0: supports D1 D2
[ 0.271339] pci 0000:01:00.1: [1002:aa88] type 0 class 0x000403
[ 0.271354] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 0.271416] pci 0000:01:00.1: supports D1 D2
[ 0.276027] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.276030] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.276033] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.276037] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276070] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.276082] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.276103] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.276116] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.276170] pci 0000:02:00.0: supports D1 D2
[ 0.276172] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.276176] pci 0000:02:00.0: PME# disabled
[ 0.284026] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.284029] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.284032] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.284035] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.284095] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.284100] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.284104] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.284108] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.284110] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.284113] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.284115] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.284117] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.284119] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.284130] pci_bus 0000:00: on NUMA node 0
[ 0.284133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.284294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.284332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.284359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.284386] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.284388] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.284390] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.291027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291060] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291092] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291124] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291156] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291220] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291251] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.291360] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.291363] vgaarb: loaded
[ 0.291364] vgaarb: bridge control possible 0000:01:00.0
[ 0.291471] i2c-core: driver [aat2870] using legacy suspend method
[ 0.291472] i2c-core: driver [aat2870] using legacy resume method
[ 0.291537] SCSI subsystem initialized
[ 0.291586] libata version 3.00 loaded.
[ 0.291628] usbcore: registered new interface driver usbfs
[ 0.291638] usbcore: registered new interface driver hub
[ 0.291661] usbcore: registered new device driver usb
[ 0.291742] PCI: Using ACPI for IRQ routing
[ 0.300239] PCI: pci_cache_line_size set to 64 bytes
[ 0.300304] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.300306] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff
[ 0.300394] NetLabel: Initializing
[ 0.300395] NetLabel: domain hash size = 128
[ 0.300397] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.300405] NetLabel: unlabeled traffic allowed by default
[ 0.300444] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.300449] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.302485] Switching to clocksource hpet
[ 0.306460] AppArmor: AppArmor Filesystem Enabled
[ 0.306490] pnp: PnP ACPI init
[ 0.306509] ACPI: bus type pnp registered
[ 0.306596] pnp 00:00: [bus 00-ff]
[ 0.306598] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.306600] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.306602] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.306604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.306606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.306608] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.306656] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.306665] pnp 00:01: [io 0x0010-0x001f]
[ 0.306666] pnp 00:01: [io 0x0022-0x003f]
[ 0.306668] pnp 00:01: [io 0x0044-0x005f]
[ 0.306670] pnp 00:01: [io 0x0062-0x0063]
[ 0.306671] pnp 00:01: [io 0x0065-0x006f]
[ 0.306673] pnp 00:01: [io 0x0074-0x007f]
[ 0.306675] pnp 00:01: [io 0x0091-0x0093]
[ 0.306676] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.306678] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.306680] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.306681] pnp 00:01: [io 0x0220-0x0225]
[ 0.306683] pnp 00:01: [io 0x0290-0x0294]
[ 0.306733] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.306736] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.306738] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.306741] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386387] Freeing initrd memory: 13820k freed
[ 0.412150] pnp 00:02: [io 0x4100-0x411f]
[ 0.412153] pnp 00:02: [io 0x0228-0x022f]
[ 0.412154] pnp 00:02: [io 0x040b]
[ 0.412156] pnp 00:02: [io 0x04d6]
[ 0.412158] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.412159] pnp 00:02: [io 0x0c14]
[ 0.412161] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.412162] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.412164] pnp 00:02: [io 0x0c6f]
[ 0.412165] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.412167] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.412169] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.412170] pnp 00:02: [io 0x4000-0x40fe]
[ 0.412172] pnp 00:02: [io 0x4210-0x4217]
[ 0.412174] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.412175] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.412177] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.412180] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.412182] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.412217] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.412274] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.412277] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.412279] system 00:02: [io 0x040b] has been reserved
[ 0.412282] system 00:02: [io 0x04d6] has been reserved
[ 0.412284] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.412286] system 00:02: [io 0x0c14] has been reserved
[ 0.412288] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.412290] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.412293] system 00:02: [io 0x0c6f] has been reserved
[ 0.412295] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.412297] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.412299] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.412301] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.412303] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.412306] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.412308] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.412310] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.412313] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.412317] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412401] pnp 00:03: [dma 4]
[ 0.412403] pnp 00:03: [io 0x0000-0x000f]
[ 0.412405] pnp 00:03: [io 0x0080-0x0090]
[ 0.412406] pnp 00:03: [io 0x0094-0x009f]
[ 0.412408] pnp 00:03: [io 0x00c0-0x00df]
[ 0.412434] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.412459] pnp 00:04: [irq 0 disabled]
[ 0.412472] pnp 00:04: [irq 8]
[ 0.412473] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.412499] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.412518] pnp 00:05: [io 0x0070-0x0073]
[ 0.412545] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.412551] pnp 00:06: [io 0x0061]
[ 0.412576] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.412583] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.412591] pnp 00:07: [irq 13]
[ 0.412618] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.412728] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.412730] pnp 00:08: [io 0x03f7]
[ 0.412738] pnp 00:08: [irq 6]
[ 0.412740] pnp 00:08: [dma 2]
[ 0.412779] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.412911] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.412919] pnp 00:09: [irq 4]
[ 0.412965] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.413001] pnp 00:0a: [io 0x0060]
[ 0.413002] pnp 00:0a: [io 0x0064]
[ 0.413010] pnp 00:0a: [irq 12]
[ 0.413046] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.413086] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.413130] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.413132] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413235] pnp 00:0c: [mem 0x000f0000-0x000f3fff]
[ 0.413237] pnp 00:0c: [mem 0x000f4000-0x000f7fff]
[ 0.413239] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.413241] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.413243] pnp 00:0c: [mem 0xcfdf0000-0xcfdfffff]
[ 0.413245] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.413246] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.413248] pnp 00:0c: [mem 0x00100000-0xcfdeffff]
[ 0.413250] pnp 00:0c: [mem 0xcfe00000-0xcfefffff]
[ 0.413252] pnp 00:0c: [mem 0xcff00000-0xcfffffff]
[ 0.413254] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.413256] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.413258] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.413259] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
[ 0.413314] system 00:0c: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.413316] system 00:0c: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.413319] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.413321] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.413323] system 00:0c: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 0.413326] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.413328] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.413330] system 00:0c: [mem 0x00100000-0xcfdeffff] could not be reserved
[ 0.413333] system 00:0c: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 0.413335] system 00:0c: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.413338] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.413340] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.413343] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.413345] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.413358] pnp: PnP ACPI: found 13 devices
[ 0.413359] ACPI: ACPI bus type pnp unregistered
[ 0.413362] PnPBIOS: Disabled by ACPI PNP
[ 0.450446] PCI: max bus depth: 1 pci_try_num: 2
[ 0.450463] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.450466] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.450468] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.450471] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.450474] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.450477] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.450479] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.450482] pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.450484] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.450488] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.450491] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.450496] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.450500] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.450511] pci 0000:00:02.0: setting latency timer to 64
[ 0.450515] pci 0000:00:06.0: setting latency timer to 64
[ 0.450522] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450524] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450526] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450528] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.450530] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.450532] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.450534] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.450536] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.450539] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.450541] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.450543] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.450545] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.450547] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.450549] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.450551] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.450553] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.450555] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450557] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.450559] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.450595] NET: Registered protocol family 2
[ 0.450661] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.450868] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.451322] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.451561] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.451563] TCP reno registered
[ 0.451566] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.451574] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.451660] NET: Registered protocol family 1
[ 0.451699] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.524019] pci 0000:00:12.0: PCI INT A disabled
[ 0.524027] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.596018] pci 0000:00:12.1: PCI INT A disabled
[ 0.596033] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.596048] pci 0000:00:12.2: PCI INT B disabled
[ 0.596061] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.668016] pci 0000:00:13.0: PCI INT A disabled
[ 0.668022] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.740018] pci 0000:00:13.1: PCI INT A disabled
[ 0.740032] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.740046] pci 0000:00:13.2: PCI INT B disabled
[ 0.740060] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.812017] pci 0000:00:14.5: PCI INT C disabled
[ 0.812027] pci 0000:01:00.0: Boot video device
[ 0.812034] PCI: CLS 4 bytes, default 64
[ 0.812374] audit: initializing netlink socket (disabled)
[ 0.812380] type=2000 audit(1346365460.808:1): initialized
[ 0.830125] highmem bounce pool size: 64 pages
[ 0.830129] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.832108] VFS: Disk quotas dquot_6.5.2
[ 0.832159] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.832641] fuse init (API version 7.17)
[ 0.832730] msgmni has been set to 1646
[ 0.833132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.833167] io scheduler noop registered
[ 0.833169] io scheduler deadline registered
[ 0.833176] io scheduler cfq registered (default)
[ 0.833274] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.833298] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.833332] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.833350] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.833406] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.833430] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.833552] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.833556] ACPI: Power Button [PWRB]
[ 0.833603] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.833605] ACPI: Power Button [PWRF]
[ 0.896569] ERST: Table is not found!
[ 0.896571] GHES: HEST is not enabled!
[ 0.896597] isapnp: Scanning for PnP cards...
[ 0.917102] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.250411] isapnp: No Plug & Play device found
[ 1.320598] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.336211] Linux agpgart interface v0.103
[ 1.337744] brd: module loaded
[ 1.338470] loop: module loaded
[ 1.338586] ahci 0000:00:11.0: version 3.0
[ 1.338608] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.338710] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.338714] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.339387] scsi0 : ahci
[ 1.339489] scsi1 : ahci
[ 1.339570] scsi2 : ahci
[ 1.339649] scsi3 : ahci
[ 1.339758] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.339761] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.339765] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.339768] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.339863] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.340238] Fixed MDIO Bus: probed
[ 1.340257] tun: Universal TUN/TAP device driver, 1.6
[ 1.340259] tun: (C) 1999-2004 Max Krasnyansky
[ 1.340313] PPP generic driver version 2.4.2
[ 1.340425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.340445] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.340461] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.340500] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.340508] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.340534] ehci_hcd 0000:00:12.2: debug port 1
[ 1.340563] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.352014] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.352155] hub 1-0:1.0: USB hub found
[ 1.352159] hub 1-0:1.0: 6 ports detected
[ 1.352226] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.352235] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.352282] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.352288] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.352308] ehci_hcd 0000:00:13.2: debug port 1
[ 1.352332] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.364019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.364117] hub 2-0:1.0: USB hub found
[ 1.364120] hub 2-0:1.0: 6 ports detected
[ 1.364182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.364192] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.364201] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.364245] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.364272] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.424100] hub 3-0:1.0: USB hub found
[ 1.424106] hub 3-0:1.0: 3 ports detected
[ 1.424160] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.424169] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.424214] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.424227] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.484105] hub 4-0:1.0: USB hub found
[ 1.484110] hub 4-0:1.0: 3 ports detected
[ 1.484164] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.484173] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.484215] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.484241] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.544099] hub 5-0:1.0: USB hub found
[ 1.544105] hub 5-0:1.0: 3 ports detected
[ 1.544158] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.544168] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.544209] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.544222] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.604123] hub 6-0:1.0: USB hub found
[ 1.604130] hub 6-0:1.0: 3 ports detected
[ 1.604196] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.604211] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.604258] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.604274] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.656036] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.660033] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.660067] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.664145] hub 7-0:1.0: USB hub found
[ 1.664151] hub 7-0:1.0: 2 ports detected
[ 1.664210] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.664270] usbcore: registered new interface driver libusual
[ 1.664309] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 1.664311] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.664728] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.664732] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.664853] mousedev: PS/2 mouse device common for all mice
[ 1.665000] rtc_cmos 00:05: RTC can wake from S4
[ 1.665105] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.665139] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.665184] device-mapper: uevent: version 1.0.3
[ 1.665255] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.665280] EISA: Probing bus 0 at eisa.0
[ 1.665282] EISA: Cannot allocate resource for mainboard
[ 1.665285] Cannot allocate resource for EISA slot 1
[ 1.665286] Cannot allocate resource for EISA slot 2
[ 1.665288] Cannot allocate resource for EISA slot 3
[ 1.665290] Cannot allocate resource for EISA slot 4
[ 1.665292] Cannot allocate resource for EISA slot 5
[ 1.665293] Cannot allocate resource for EISA slot 6
[ 1.665295] Cannot allocate resource for EISA slot 7
[ 1.665297] Cannot allocate resource for EISA slot 8
[ 1.665298] EISA: Detected 0 cards.
[ 1.665306] cpufreq-nforce2: No nForce2 chipset.
[ 1.665308] cpuidle: using governor ladder
[ 1.665310] cpuidle: using governor menu
[ 1.665311] EFI Variables Facility v0.08 2004-May-17
[ 1.665506] TCP cubic registered
[ 1.665604] NET: Registered protocol family 10
[ 1.666019] NET: Registered protocol family 17
[ 1.666022] Registering the dns_resolver key type
[ 1.666040] Using IPI No-Shortcut mode
[ 1.666149] PM: Hibernation image not present or could not be loaded.
[ 1.666158] registered taskstats version 1
[ 1.671739] Magic number: 8:975:452
[ 1.671831] rtc_cmos 00:05: setting system clock to 2012-08-30 22:24:22 UTC (1346365462)
[ 1.671838] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
[ 1.671879] powernow-k8: fid 0x16 (3000 MHz), vid 0x8
[ 1.671880] powernow-k8: fid 0x14 (2800 MHz), vid 0xa
[ 1.671882] powernow-k8: fid 0x12 (2600 MHz), vid 0xc
[ 1.671884] powernow-k8: fid 0x10 (2400 MHz), vid 0xe
[ 1.671885] powernow-k8: fid 0xe (2200 MHz), vid 0x10
[ 1.671887] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 1.671888] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 1.671890] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 1.671943] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.671946] EDD information not available.
[ 1.828038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.831387] ata1.00: HPA detected: current 145223999, native 145226112
[ 1.831391] ata1.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[ 1.831393] ata1.00: 145223999 sectors, multi 16: LBA48
[ 1.835785] ata1.00: configured for UDMA/133
[ 1.835928] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
[ 1.836046] sd 0:0:0:0: [sda] 145223999 512-byte logical blocks: (74.3 GB/69.2 GiB)
[ 1.836069] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.836085] sd 0:0:0:0: [sda] Write Protect is off
[ 1.836088] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.836105] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.852840] sda: sda1 sda2 < sda5 >
[ 1.853197] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.853264] Freeing unused kernel memory: 740k freed
[ 1.853575] Write protecting the kernel text: 5820k
[ 1.853590] Write protecting the kernel read-only data: 2376k
[ 1.853591] NX-protecting the kernel data: 4420k
[ 1.866390] udevd[93]: starting version 175
[ 1.872066] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 1.914242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.914265] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.914290] r8169 0000:02:00.0: setting latency timer to 64
[ 1.914332] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.914734] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xf840c000, 1c:6f:65:52:49:36, XID 0c200000 IRQ 42
[ 1.914737] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.918268] Floppy drive(s): fd0 is 1.44M
[ 1.929965] scsi4 : pata_atiixp
[ 1.934034] scsi5 : pata_atiixp
[ 1.934520] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.934523] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.935899] FDC 0 is a post-1991 82077
[ 2.092929] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.099686] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
[ 2.112408] ata5.00: configured for UDMA/66
[ 2.117589] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42N RL00 PQ: 0 ANSI: 5
[ 2.123965] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.123967] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.124108] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.124230] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.130394] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
[ 2.130474] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-3/input0
[ 2.130491] usbcore: registered new interface driver usbhid
[ 2.130493] usbhid: USB HID core driver
[ 21.974159] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.001060] udevd[349]: starting version 175
[ 22.035929] lp: driver loaded but no devices found
[ 22.071176] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.071181] Disabling lock debugging due to kernel taint
[ 22.133919] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 22.134292] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 22.134388] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 22.190051] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 22.231838] type=1400 audit(1346365483.052:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=512 comm="apparmor_parser"
[ 22.232231] type=1400 audit(1346365483.056:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
[ 22.232428] type=1400 audit(1346365483.056:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 22.240703] [fglrx] Maximum main memory to use for locked dma buffers: 3862 MBytes.
[ 22.240806] [fglrx] vendor: 1002 device: 6739 count: 1
[ 22.241201] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 22.241215] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.241220] pci 0000:01:00.0: setting latency timer to 64
[ 22.242012] [fglrx] Kernel PAT support is enabled
[ 22.242029] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 22.289785] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 22.368158] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.381367] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.381421] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 22.381443] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 22.405860] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 22.406009] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input3
[ 22.491720] init: failsafe main process (714) killed by TERM signal
[ 22.492143] init: ssh main process (725) terminated with status 255
[ 22.492162] init: ssh main process ended, respawning
[ 22.519270] init: ssh main process (762) terminated with status 255
[ 22.519293] init: ssh main process ended, respawning
[ 22.543009] init: ssh main process (778) terminated with status 255
[ 22.543032] init: ssh main process ended, respawning
[ 22.561416] Bluetooth: Core ver 2.16
[ 22.561717] NET: Registered protocol family 31
[ 22.561719] Bluetooth: HCI device and connection manager initialized
[ 22.561722] Bluetooth: HCI socket layer initialized
[ 22.561724] Bluetooth: L2CAP socket layer initialized
[ 22.561729] Bluetooth: SCO socket layer initialized
[ 22.561921] init: ssh main process (795) terminated with status 255
[ 22.561947] init: ssh main process ended, respawning
[ 22.580700] init: ssh main process (814) terminated with status 255
[ 22.580723] init: ssh main process ended, respawning
[ 22.581768] ppdev: user-space parallel port driver
[ 22.589290] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.589293] Bluetooth: BNEP filters: protocol multicast
[ 22.604192] init: ssh main process (834) terminated with status 255
[ 22.604220] init: ssh main process ended, respawning
[ 22.612445] Bluetooth: RFCOMM TTY layer initialized
[ 22.612451] Bluetooth: RFCOMM socket layer initialized
[ 22.612453] Bluetooth: RFCOMM ver 1.11
[ 22.632722] init: ssh main process (856) terminated with status 255
[ 22.635385] type=1400 audit(1346365483.456:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=858 comm="apparmor_parser"
[ 22.635801] type=1400 audit(1346365483.456:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=858 comm="apparmor_parser"
[ 22.636461] init: ssh main process ended, respawning
[ 22.638918] type=1400 audit(1346365483.460:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=859 comm="apparmor_parser"
[ 22.640664] type=1400 audit(1346365483.464:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=855 comm="apparmor_parser"
[ 22.646621] type=1400 audit(1346365483.468:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser"
[ 22.646826] type=1400 audit(1346365483.468:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser"
[ 22.669238] init: ssh main process (868) terminated with status 255
[ 22.669263] init: ssh main process ended, respawning
[ 22.681845] type=1400 audit(1346365483.504:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=875 comm="apparmor_parser"
[ 22.686875] init: ssh main process (878) terminated with status 255
[ 22.686900] init: ssh main process ended, respawning
[ 22.699505] init: ssh main process (885) terminated with status 255
[ 22.699529] init: ssh main process ended, respawning
[ 22.710760] init: ssh main process (888) terminated with status 255
[ 22.710784] init: ssh respawning too fast, stopped
[ 22.851716] r8169 0000:02:00.0: eth0: link down
[ 22.851723] r8169 0000:02:00.0: eth0: link down
[ 22.852984] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.858151] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.883923] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 22.913548] init: ssh main process (1003) terminated with status 255
[ 22.913577] init: ssh main process ended, respawning
[ 22.937688] init: ssh main process (1030) terminated with status 255
[ 22.937715] init: ssh main process ended, respawning
[ 22.956815] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 22.956818] vesafb: scrolling: redraw
[ 22.956821] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 22.959483] vesafb: framebuffer at 0xd0000000, mapped to 0xf8b80000, using 1920k, total 1920k
[ 22.959815] fbcon: VESA VGA (fb0) is primary device
[ 22.959881] Console: switching to colour frame buffer device 100x37
[ 22.959896] fb0: VESA VGA frame buffer device
[ 22.964189] init: ssh main process (1044) terminated with status 255
[ 22.964215] init: ssh main process ended, respawning
[ 23.033804] init: ssh main process (1086) terminated with status 255
[ 23.033829] init: ssh main process ended, respawning
[ 23.053658] init: ssh main process (1102) terminated with status 255
[ 23.053684] init: ssh main process ended, respawning
[ 23.065163] init: ssh main process (1113) terminated with status 255
[ 23.065186] init: ssh main process ended, respawning
[ 23.074175] init: ssh main process (1119) terminated with status 255
[ 23.074200] init: ssh main process ended, respawning
[ 23.083009] init: ssh main process (1122) terminated with status 255
[ 23.083047] init: ssh main process ended, respawning
[ 23.091844] init: ssh main process (1125) terminated with status 255
[ 23.091877] init: ssh main process ended, respawning
[ 23.100961] init: ssh main process (1128) terminated with status 255
[ 23.100984] init: ssh main process ended, respawning
[ 23.109870] init: ssh main process (1141) terminated with status 255
[ 23.109904] init: ssh respawning too fast, stopped
[ 23.662275] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 23.663026] [fglrx] Firegl kernel thread PID: 1348
[ 23.663097] [fglrx] Firegl kernel thread PID: 1349
[ 23.663166] [fglrx] Firegl kernel thread PID: 1350
[ 23.663283] [fglrx] IRQ 44 Enabled
[ 23.950245] [fglrx] Gart USWC size:1260 M.
[ 23.950248] [fglrx] Gart cacheable size:499 M.
[ 23.950253] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 23.950255] [fglrx] Reserved FB block: Unshared offset:fc0f000, size:3f1000
[ 23.950257] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 24.028664] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 24.028681] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 24.029894] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 24.029907] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 24.332038] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 24.509239] r8169 0000:02:00.0: eth0: link up
[ 24.509389] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.632034] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 24.932026] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 25.030407] init: mysql main process (1087) terminated with status 1
[ 25.030442] init: mysql main process ended, respawning
[ 25.074689] init: mysql post-start process (1089) terminated with status 1
[ 25.232025] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 25.532022] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 25.832023] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 26.132701] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 26.432038] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.043603] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.043620] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.060423] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 31.060436] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 31.083260] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 31.083274] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.084528] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 31.084541] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.340024] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.640026] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 31.940023] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 32.240781] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 32.540044] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 32.840044] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 33.140044] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 33.440040] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 34.920022] eth0: no IPv6 routers present