dmesg - efikamx_armhf_fbdev_cairo-demos
Initializing cgroup subsys cpuset
Linux version 2.6.31.14.27-efikamx (root@armhf) (gcc version 4.4.6 (Debian/Linaro 4.4.6-14) ) #1 Tue Feb 21 15:43:17 UTC 2012
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Genesi Efika MX (Smartbook)
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 118784
free_area_init_node: node 0, pgdat 80490eec, node_mem_map 804f8000
DMA zone: 192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 24384 pages, LIFO batch:3
Normal zone: 736 pages used for memmap
Normal zone: 93472 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117856
Kernel command line: console=ttymxc0,115200 earlyprintk=serial root=LABEL=rootssd rw rootwait
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 464MB = 464MB total
Memory: 462336KB available (3992K code, 604K data, 144K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:368
MXC IRQ initialized
MXC_Early serial console at MMIO 0x73fbc000 (options '115200')
console [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 KB@0x9d840000
IRAM READY
CPU is i.MX51 Revision 3.0
MXC GPIO hardware
Efika MX: mmc0 configured as MicroSD
Efika MX: mmc1 configured as external SDHC
Efika MX: Smartbook Revision 2.0
Efika MX: Memory type Nanya DDR2
Using SDMA I.API
MXC DMA API initialized
bio: create slab at 0
SCSI subsystem initialized
libata version 3.00 loaded.
CSPI: mxc_spi-0 probed
IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
NET: Registered protocol family 8
NET: Registered protocol family 20
mc13892 Rev 2.0 FinVer 2 detected
Initializing regulators for Efika MX
regulator: SW1: 600 1375 mV
regulator: SW2: 900 1850 mV
regulator: SW3: 1100 1850 mV
regulator: SW4: 1100 1850 mV
regulator: SWBST: 0 mV
regulator: VIOHI: 0 mV
regulator: VPLL: 1050 1800 mV
regulator: VDIG: 1650 mV
regulator: VSD: 3150 mV
regulator: VUSB2: 2400 2775 mV
regulator: VVIDEO: 2775 mV
regulator: VAUDIO: 2300 3000 mV
regulator: VCAM: 2500 3000 mV fast normal
regulator: VGEN1: 1200 3150 mV
regulator: VGEN2: 3150 mV
regulator: VGEN3: 1800 2900 mV
regulator: VUSB: 0 mV
regulator: GPO1: 0 mV
regulator: GPO2: 0 mV
regulator: GPO3: 0 mV
regulator: GPO4: 0 mV
Device spi1.0 probed
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 3036K
LPMode driver module loaded
Static Power Management for Freescale i.MX51
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 909
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
io scheduler cfq registered
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
Console: switching to colour frame buffer device 80x30
EDID Dump:
00ffffffffffff000daf1810000000003313010380160c780a4be58f5b599027
1d5054000000010101010101010101010101010101012c15006a415834206d48
7d00de7d00000018000000fe004e3130314c362d4c30440a2020000000fe0043
4d4f0a202020202020202020000000fe004e3130314c362d4c30440a20200047
resolution: r(1024, 600), v(1024, 600) o(0, 0)
bpp=0, hw(0, 0), pclk=18450
margin(181, 109, 32, 7)
hv(72, 13), sync=0, vmode=0
mtl017: Probe LCD Panel: CMO N101L6-L0D
IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
console handover: boot [ttymxc0] -> real [ttymxc0]
loop: module loaded
pata_fsl pata_fsl: rchan=29 wchan=28
scsi0 : pata_fsl
mtl017 1-003a: Initializing MTL017 LVDS Controller
ata1: PATA max UDMA/44 irq 70
mice: PS/2 mouse device common for all mice
mc13892 rtc probe start
pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
mc13892 rtc probe succeed
i2c /dev entries driver
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: Registered device video0
MXC WatchDog Driver 2.0
clk: Unable to get requested clock: wdog_clk
MXC Watchdog # 0 Timer: initial timeout 60 sec
cpuidle: using governor ladder
cpuidle: using governor menu
PMIC Character device: successfully loaded
VPU initialized
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 187 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 136 irq 2 INTERNAL DMA
Registered led device: led:capslock
Registered led device: led:alarm
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
ThumbEE CPU extension supported.
ata1.00: CFA: Flash Module, Ver2.M11, max UDMA/100
ata1.00: 30146256 sectors, multi 1: LBA
input: Efika MX Input as /devices/virtual/input/input0
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
regulator_init_complete: incomplete constraints, leaving GPO4 on
regulator_init_complete: incomplete constraints, leaving GPO3 on
regulator_init_complete: incomplete constraints, leaving GPO2 on
regulator_init_complete: incomplete constraints, leaving GPO1 on
regulator_init_complete: incomplete constraints, leaving VGEN1 on
regulator_init_complete: incomplete constraints, leaving VCAM on
regulator_init_complete: incomplete constraints, leaving VAUDIO on
regulator_init_complete: incomplete constraints, leaving VSD on
regulator_init_complete: incomplete constraints, leaving VDIG on
regulator_init_complete: incomplete constraints, leaving SWBST on
ata1.00: configured for UDMA/44
scsi 0:0:0:0: Direct-Access ATA Flash Module Ver2 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 30146256 512-byte logical blocks: (15.4 GB/14.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
pmic_rtc pmic_rtc.1: setting system clock to 2012-08-19 09:21:10 UTC (1345368070)
Freeing init memory: 144K
udevd[534]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 14, io base 0x73f80200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb 2-1: new high speed USB device using fsl-ehci and address 2
fsl-ehci fsl-ehci.2: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.2: new USB bus registered, assigned bus number 3
fsl-ehci fsl-ehci.2: irq 16, io base 0x73f80400
fsl-ehci fsl-ehci.2: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
EXT4-fs (sda2): barriers enabled
kjournald2 starting: pid 602, dev sda2:8, commit interval 5 seconds
usb 3-1: new high speed USB device using fsl-ehci and address 2
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
EXT4-fs (sda2): internal journal on sda2:8
EXT4-fs (sda2): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda2): mounted filesystem with ordered data mode
usb 2-1.1: new low speed USB device using fsl-ehci and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.2: new high speed USB device using fsl-ehci and address 4
usb 2-1.2: configuration #1 chosen from 1 choice
usb 2-1.3: new high speed USB device using fsl-ehci and address 5
usb 2-1.3: configuration #1 chosen from 1 choice
usb 3-1.1: new full speed USB device using fsl-ehci and address 3
usb 3-1.1: configuration #1 chosen from 1 choice
usb 3-1.2: new high speed USB device using fsl-ehci and address 4
usb 3-1.2: configuration #1 chosen from 1 choice
udevd[730]: starting version 175
input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
usbcore: registered new interface driver usbkbd
usbkbd: :USB HID Boot Protocol keyboard driver
input: USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
generic-usb 0003:04D9:FF09.0001: input: USB HID v1.10 Mouse [USB Keyboard] on usb-fsl-ehci.1-1.1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Bluetooth: Core ver 2.15
sgtl5000-i2c 1-000a: SGTL5000 revision 17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Pegatron (04f2:b1b0)
input: Pegatron as /devices/platform/fsl-ehci.2/usb3/3-1/3-1.2/3-1.2:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 2-1.3: applying rev.C fixup
usb 2-1.3: applying rev.C fixup
eth0: register 'MOSCHIP usb-ethernet driver' at usb-fsl-ehci.1-1.3, MOSCHIP 7830/7730 usb-NET adapter, 00:13:3b:15:05:28
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Compat-wireless backport release: compat-wireless-3.5-rc5-1
Backport based on linux-stable.git v3.5-rc5
compat.git: linux-stable.git
SBS: Initial State: Powered
SBS: Battery structure 0x98364200
m25p80 spi1.1: sst25vf032b (4096 Kbytes)
Creating 3 MTD partitions on "spi_nor_flash":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000050000 : "config"
0x000000050000-0x000000400000 : "spare"
cfg80211: Calling CRDA to update world regulatory domain
usb 2-1.2: reset high speed USB device using fsl-ehci and address 4
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
usbcore: registered new interface driver rt2800usb
kgsl_hal_init: hal->z430_regspace.mmio_phys_base = 0x30000000
kgsl_hal_init: hal->z430_regspace.mmio_virt_base = 0x9dbc0000
kgsl_hal_init: hal->z430_regspace.sizebytes = 0x00020000
kgsl_hal_init: hal->z160_regspace.mmio_phys_base = 0xd0000000
kgsl_hal_init: hal->z160_regspace.mmio_virt_base = 0x9db88000
kgsl_hal_init: hal->z160_regspace.sizebytes = 0x00001000
GPU MMU enabled
Reserved memory: pa = 0x94800000 va = 0xf9e0f000 size = 0x00800000
GSL_HAL_MEM2 aperture (PHYS) pa = 0x94800000 va = 0xf9e0f000 size = 0x00800000
GSL_HAL_MEM1 aperture (MMU) pa = 0x00100000 va = 0x00100000 size = 0x08000000
No device for DAI imx-ssi-2-0
No device for DAI imx-ssi-2-1
DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffe2000 buf->area=9d842000 size=24576
DMA Sound Buffers Allocated:UseIram=1 buf->addr=a82e0000 buf->area=fa60f000 size=24576
asoc: SGTL5000 imx-ssi-2-0 mapping ok
ramzswap: module is from the staging directory, the quality is unknown, you have been warned.
ramzswap: num_devices not specified. Using default: 1
ramzswap: /dev/ramzswap0 initialized: disksize_kb=131072
ramzswap: Invalid ioctl 21297
ramzswap: Invalid ioctl 4730
ramzswap: Invalid ioctl 21297
Adding 131064k swap on /dev/ramzswap0. Priority:0 extents:1 across:131064k SS
fuse init (API version 7.12)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:22:6b:e1:79:de
wlan0: send auth to 00:22:6b:e1:79:de (try 1/3)
wlan0: authenticated
wlan0: associate with 00:22:6b:e1:79:de (try 1/3)
wlan0: RX AssocResp from 00:22:6b:e1:79:de (capab=0x431 status=0 aid=7)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
DMFC high resolution has set, will not change
Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
eth0: no IPv6 routers present
wlan0: no IPv6 routers present
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
imx_ssi_irq mxc_ssi SISR bcf0 SIER 780500 fifo_errs=1
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
Z430 found: core 0 major 2 minor 5 patch 1 (chipid 0x00020501)
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
DMFC high resolution has set, will not change
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
sgtl5000_hw_read: read reg error : Reg 0x0e