dmesg - phtest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-29-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 (Ubuntu 3.2.0-29.46-generic 3.2.24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000093800 (usable)
BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf730000 (usable)
BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3004 03/12/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf730 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000008e000] 8e000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cf730000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cf600000 page 2M
00cf600000 - 00cf730000 page 4k
kernel direct mapping tables up to cf730000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0200000000 page 1G
0200000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ cf72e000-cf730000
RAMDISK: 36480000 - 37238000
ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cfe90000 00040 (v01 ACRSYS ACRPRDCT 20100312 ANNI 00000097)
ACPI: FACP 00000000cfe90200 00084 (v01 031210 FACP1011 20100312 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
ACPI: DSDT 00000000cfe90450 0E7D6 (v01 A1160 A1160000 00000000 INTL 20060113)
ACPI: FACS 00000000cfea8000 00040
ACPI: APIC 00000000cfe90390 0007C (v01 031210 APIC1011 20100312 MSFT 00000097)
ACPI: MCFG 00000000cfe90410 0003C (v01 031210 OEMMCFG 20100312 MSFT 00000097)
ACPI: OEMB 00000000cfea8040 00072 (v01 031210 OEMB1011 20100312 MSFT 00000097)
ACPI: HPET 00000000cfe9f450 00038 (v01 031210 OEMHPET 20100312 MSFT 00000097)
ACPI: SSDT 00000000cfe9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: SLIC 00000000cfe9fd1c 00176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Initmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [000000022fffb000 - 000000022fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x00000093
0: 0x00000100 -> 0x000cf730
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2094771
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3902 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 829296 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000093000 - 0000000000094000
PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cf730000 - 00000000cfe90000
PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u262144
pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058926
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 55e4000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 8085876k/9175040k available (6555k kernel code, 795956k absent, 293208k reserved, 6645k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3411.699 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.39 BogoMIPS (lpj=13646796)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 26998 entries in 106 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 8e000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 8e000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 8e000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (27293.29 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
print_constraints: dummy:
RTC time: 7:44:44, date: 08/15/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:05.0: [1002:597b] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:0b.0: [1002:5980] type 1 class 0x000604
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:11.0: [1002:4393] type 0 class 0x000104
pci 0000:00:11.0: reg 10: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 14: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 18: [io 0x7000-0x7007]
pci 0000:00:11.0: reg 1c: [io 0x6000-0x6003]
pci 0000:00:11.0: reg 20: [io 0x5000-0x500f]
pci 0000:00:11.0: reg 24: [mem 0xf78fe400-0xf78fe7ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xf78f6000-0xf78f6fff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xf78f7000-0xf78f7fff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xf78fe800-0xf78fe8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xf78fc000-0xf78fcfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xf78fd000-0xf78fdfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xf78fec00-0xf78fecff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xf78f8000-0xf78fbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xf78ff000-0xf78fffff]
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:0c:00.0: [10de:0615] type 0 class 0x000300
pci 0000:0c:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:0c:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0c:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:0c:00.0: reg 24: [io 0xec00-0xec7f]
pci 0000:0c:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 0c-0c]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: [104c:8231] type 1 class 0x000604
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 0a-0b]
pci 0000:00:05.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:0b:00.0: [104c:8235] type 0 class 0x000c00
pci 0000:0b:00.0: reg 10: [mem 0xf7fff800-0xf7ffffff]
pci 0000:0b:00.0: reg 14: [mem 0xf7ff8000-0xf7ffbfff]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0b:00.0: PME# disabled
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:09:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:09:00.0: reg 18: [mem 0xf7eff000-0xf7efffff 64bit]
pci 0000:09:00.0: reg 30: [mem 0xf7ec0000-0xf7edffff pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 09-09]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:08:00.0: [1106:3403] type 0 class 0x000c00
pci 0000:08:00.0: reg 10: [mem 0xf7dff800-0xf7dfffff 64bit]
pci 0000:08:00.0: reg 18: [io 0xc800-0xc8ff]
pci 0000:08:00.0: supports D2
pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 08-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
pci 0000:02:00.0: reg 10: [mem 0xf7ae0000-0xf7afffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0b.0: PCI bridge to [bus 02-07]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xf7a00000-0xf7cfffff]
pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
pci 0000:03:05.0: PME# disabled
pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
pci 0000:03:07.0: PME# disabled
pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xf7b00000-0xf7cfffff]
pci 0000:07:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:07:00.0: reg 10: [mem 0xf7cfe000-0xf7cfffff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:03:01.0: PCI bridge to [bus 07-07]
pci 0000:03:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:06:00.0: [1b4b:9120] type 0 class 0x000106
pci 0000:06:00.0: reg 10: [io 0xbc00-0xbc07]
pci 0000:06:00.0: reg 14: [io 0xb880-0xb883]
pci 0000:06:00.0: reg 18: [io 0xb800-0xb807]
pci 0000:06:00.0: reg 1c: [io 0xb480-0xb483]
pci 0000:06:00.0: reg 20: [io 0xb400-0xb40f]
pci 0000:06:00.0: reg 24: [mem 0xf7bff800-0xf7bfffff]
pci 0000:06:00.0: reg 30: [mem 0xf7be0000-0xf7beffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:03:05.0: PCI bridge to [bus 06-06]
pci 0000:03:05.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:05.0: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:03:07.0: PCI bridge to [bus 05-05]
pci 0000:03:09.0: PCI bridge to [bus 04-04]
pci 0000:01:06.0: [10ec:8139] type 0 class 0x000200
pci 0000:01:06.0: reg 10: [io 0xa800-0xa8ff]
pci 0000:01:06.0: reg 14: [mem 0xf79ffc00-0xf79ffcff]
pci 0000:01:06.0: reg 30: [mem 0xf79e0000-0xf79effff pref]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:06.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0c:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Freeing initrd memory: 14048k freed
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000093800 - 000000000009ffff
reserve RAM buffer: 00000000cf730000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [mem 0xfec00000-0xfec00fff]
pnp 00:06: [mem 0xfee00000-0xfee00fff]
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00b1]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x040b]
pnp 00:07: [io 0x04d6]
pnp 00:07: [io 0x0c00-0x0c01]
pnp 00:07: [io 0x0c14]
pnp 00:07: [io 0x0c50-0x0c51]
pnp 00:07: [io 0x0c52]
pnp 00:07: [io 0x0c6c]
pnp 00:07: [io 0x0c6f]
pnp 00:07: [io 0x0cd0-0x0cd1]
pnp 00:07: [io 0x0cd2-0x0cd3]
pnp 00:07: [io 0x0cd4-0x0cd5]
pnp 00:07: [io 0x0cd6-0x0cd7]
pnp 00:07: [io 0x0cd8-0x0cdf]
pnp 00:07: [io 0x0b00-0x0b3f]
pnp 00:07: [io 0x0800-0x089f]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0b00-0x0b0f]
pnp 00:07: [io 0x0b20-0x0b3f]
pnp 00:07: [io 0x0900-0x090f]
pnp 00:07: [io 0x0910-0x091f]
pnp 00:07: [io 0xfe00-0xfefe]
pnp 00:07: [io 0x0060-0x005f disabled]
pnp 00:07: [io 0x0064-0x0063 disabled]
pnp 00:07: [mem 0xcff00000-0xcfffffff]
pnp 00:07: [mem 0xffb80000-0xffbfffff]
pnp 00:07: [mem 0xfec10000-0xfec1001f]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0b00-0x0b3f] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b00-0x0b0f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io 0x0230-0x023f]
pnp 00:0c: [io 0x0290-0x029f]
pnp 00:0c: [io 0x0f40-0x0f4f]
pnp 00:0c: [io 0x0a30-0x0a3f]
system 00:0c: [io 0x0230-0x023f] has been reserved
system 00:0c: [io 0x0290-0x029f] has been reserved
system 00:0c: [io 0x0f40-0x0f4f] has been reserved
system 00:0c: [io 0x0a30-0x0a3f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xcfefffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0e: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:02.0: PCI bridge to [bus 0c-0c]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:05.0: PCI bridge to [bus 0a-0b]
pci 0000:00:05.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:06.0: PCI bridge to [bus 09-09]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:07.0: PCI bridge to [bus 08-08]
pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:01.0: PCI bridge to [bus 07-07]
pci 0000:03:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:03:05.0: PCI bridge to [bus 06-06]
pci 0000:03:05.0: bridge window [io 0xb000-0xbfff]
pci 0000:03:05.0: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:03:07.0: PCI bridge to [bus 05-05]
pci 0000:03:09.0: PCI bridge to [bus 04-04]
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:00.0: bridge window [mem 0xf7b00000-0xf7cfffff]
pci 0000:00:0b.0: PCI bridge to [bus 02-07]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xf7a00000-0xf7cfffff]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:02:00.0: setting latency timer to 64
pci 0000:03:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:01.0: setting latency timer to 64
pci 0000:03:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:05.0: setting latency timer to 64
pci 0000:03:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:03:07.0: setting latency timer to 64
pci 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:0b: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7cfffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7cfffff]
pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:0c:00.0: Boot video device
pci 0000:0a:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1345016684.992:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 15948
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 44 for MSI/MSI-X
pcieport 0000:02:00.0: setting latency timer to 64
pcieport 0000:02:00.0: irq 45 for MSI/MSI-X
pcieport 0000:03:01.0: setting latency timer to 64
pcieport 0000:03:01.0: irq 46 for MSI/MSI-X
pcieport 0000:03:05.0: setting latency timer to 64
pcieport 0000:03:05.0: irq 47 for MSI/MSI-X
pcieport 0000:03:07.0: setting latency timer to 64
pcieport 0000:03:07.0: irq 48 for MSI/MSI-X
pcieport 0000:03:09.0: setting latency timer to 64
pcieport 0000:03:09.0: irq 49 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: irq 50 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf78fe400 port 0xf78fe500 irq 50
ata2: SATA max UDMA/133 abar m1024@0xf78fe400 port 0xf78fe580 irq 50
ata3: SATA max UDMA/133 abar m1024@0xf78fe400 port 0xf78fe600 irq 50
ata4: SATA max UDMA/133 abar m1024@0xf78fe400 port 0xf78fe680 irq 50
ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:06:00.0: irq 51 for MSI/MSI-X
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:06:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m2048@0xf7bff800 port 0xf7bff900 irq 51
ata6: SATA max UDMA/133 abar m2048@0xf7bff800 port 0xf7bff980 irq 51
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf78fe800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf78fec00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf78f6000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf78f7000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf78fc000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf78fd000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf78ff000
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 2 using ehci_hcd
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:07:00.0: setting latency timer to 64
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:07:00.0: irq 16, io mem 0xf7cfe000
xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 56 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Magic number: 8:563:723
block loop3: hash matches
rtc_cmos 00:02: setting system clock to 2012-08-15 07:44:46 UTC (1345016686)
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3400 MHz)
powernow-k8: 1 : pstate 1 (2700 MHz)
powernow-k8: 2 : pstate 2 (2200 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: C300-CTFDDAC064MAG, 0002, max UDMA/100
ata6.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/100
ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133
ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sda: sda1 sda2 sda3 sda4
sda: p4 size 1701255168 extends beyond EOD, enabling native capacity
sda: sda1 sda2 sda3 sda4
sda: p4 size 1701255168 extends beyond EOD, truncated
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Corsair Force GT 1.3. PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
scsi 5:0:0:0: Direct-Access ATA C300-CTFDDAC064M 0002 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 sdd3
sd 5:0:0:0: [sdd] Attached SCSI disk
sdb: unknown partition table
sd 2:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1616k freed
Freeing unused kernel memory: 1200k freed
udevd[166]: starting version 175
xor: automatically using best checksumming function: generic_sse
generic_sse: 13938.000 MB/sec
xor: using function: generic_sse (13938.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Floppy drive(s): fd0 is 1.44M
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:09:00.0: setting latency timer to 64
r8169 0000:09:00.0: irq 57 for MSI/MSI-X
r8169 0000:09:00.0: eth0: RTL8168b/8111b at 0xffffc9001178a000, 48:5b:39:59:71:fe, XID 18000000 IRQ 57
r8169 0000:09:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
FDC 0 is a post-1991 82077
firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
firewire_ohci 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci 0000:08:00.0: setting latency timer to 64
Refined TSC clocksource calibration: 3411.621 MHz.
Switching to clocksource tsc
firewire_ohci: Added fw-ohci device 0000:08:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
ata7.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66
ata7.00: configured for UDMA/66
scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg4 type 5
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
8139too 0000:01:06.0: eth1: RealTek RTL8139 at 0xa800, 00:e0:4c:d2:6f:88, IRQ 21
firewire_core: created device fw0: GUID 08144374000025e3, S400
firewire_core: created device fw1: GUID 001e8c0000d61da7, S400
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[683]: starting version 175
lp: driver loaded but no devices found
it87: Found IT8720F chip at 0x290, revision 2
ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region SIOE [io 0x290-0x2af]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
type=1400 audit(1345027493.201:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
type=1400 audit(1345027493.201:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
type=1400 audit(1345027493.205:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.3.0 loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
IR NEC protocol handler initialized
Linux video capture interface: v2.00
IR RC5(x) protocol handler initialized
cx231xx v4l2 driver loaded.
cx231xx #0: New device Conexant Corporation VT105B @ 480 Mbps (1554:5014) with 6 interfaces
cx231xx #0: registering interface 1
IR RC6 protocol handler initialized
cx231xx #0: Identified as Pixelview Xcapture USB (card=11)
IR JVC protocol handler initialized
nvidia 0000:0c:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:0c:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:0c:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
IR Sony protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 250
IR LIRC bridge handler initialized
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC1200: BIOS auto-probing.
cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
cx25840 0-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
cx25840 0-0044: Firmware download size changed to 16 bytes max length
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input11
EXT4-fs (sdd1): re-mounted. Opts: discard,errors=remount-ro
EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1426) killed by TERM signal
ppdev: user-space parallel port driver
type=1400 audit(1345027495.041:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1488 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1345027495.041:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1488 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1345027495.061:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1537 comm="apparmor_parser"
type=1400 audit(1345027495.061:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1537 comm="apparmor_parser"
type=1400 audit(1345027495.061:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1537 comm="apparmor_parser"
type=1400 audit(1345027495.061:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1536 comm="apparmor_parser"
type=1400 audit(1345027495.061:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1541 comm="apparmor_parser"
r8169 0000:09:00.0: eth0: link down
r8169 0000:09:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
8139too 0000:01:06.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cx25840 0-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
cx231xx #0: cx231xx #0: v4l2 driver version 0.0.2
cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
cx231xx #0: video_mux : 0
cx231xx #0: do_mode_ctrl_overrides : 0xb000
cx231xx #0: do_mode_ctrl_overrides NTSC
cx231xx #0: cx231xx #0/0: registered device video0 [v4l2]
cx231xx #0: cx231xx #0/0: registered device vbi0
cx231xx #0: V4L2 device registered as video0 and vbi0
cx231xx #0: EndPoint Addr 0x84, Alternate settings: 5
cx231xx #0: Alternate setting 0, max size= 512
cx231xx #0: Alternate setting 1, max size= 184
cx231xx #0: Alternate setting 2, max size= 728
cx231xx #0: Alternate setting 3, max size= 2892
cx231xx #0: Alternate setting 4, max size= 1800
cx231xx #0: EndPoint Addr 0x85, Alternate settings: 2
cx231xx #0: Alternate setting 0, max size= 512
cx231xx #0: Alternate setting 1, max size= 512
cx231xx #0: EndPoint Addr 0x86, Alternate settings: 2
cx231xx #0: Alternate setting 0, max size= 512
cx231xx #0: Alternate setting 1, max size= 576
cx231xx #0: EndPoint Addr 0x81, Alternate settings: 6
cx231xx #0: Alternate setting 0, max size= 512
cx231xx #0: Alternate setting 1, max size= 64
cx231xx #0: Alternate setting 2, max size= 128
cx231xx #0: Alternate setting 3, max size= 316
cx231xx #0: Alternate setting 4, max size= 712
cx231xx #0: Alternate setting 5, max size= 1424
usbcore: registered new interface driver cx231xx
cx231xx #0: cx231xx-audio.c: probing for cx231xx non standard usbaudio
cx231xx #0: EndPoint Addr 0x83, Alternate settings: 3
cx231xx #0: Alternate setting 0, max size= 512
cx231xx #0: Alternate setting 1, max size= 28
cx231xx #0: Alternate setting 2, max size= 52
cx231xx: Cx231xx Audio Extension initialized
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x4a6 offMax=0x1a36
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18 (interface 0x00190000).
cx231xx #0: setPowerMode::mode = 48, No Change req.
cx231xx #0: cx231xx_stop_stream():: ep_mask = 8
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011f00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vboxpci: IOMMU not found (not registered)
r8169 0000:09:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_init_audio_isoc: Starting ISO AUDIO transfers
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
eth1: no IPv6 routers present
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
cx231xx #0: cx231xx_start_stream():: ep_mask = 4
cx231xx #0: cx231xx_init_audio_isoc: Starting ISO AUDIO transfers
eth0: no IPv6 routers present
cx231xx #0: cx231xx_stop_stream():: ep_mask = 4
init: smbd main process (1434) killed by TERM signal