dmesg - aws-cc2.8xlarge-ebs-us-east1a-492-107386-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.22-35.60.amzn1.x86_64 (mockbuild@gobi-build-31003) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Thu Jul 5 14:07:24 UTC 2012
Command line: root=LABEL=/ console=ttyS0 LANG=en_US.UTF-8 KEYTABLE=us
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000f63000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Xen HVM domU, BIOS 3.4.3-kaos_avx-110 10/10/2011
Hypervisor detected: Xen HVM
Xen version 3.4.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xf63000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFE0000000 uncachable
1 base 0000E0000000 mask 3FFFF0000000 uncachable
2 base 0000F0000000 mask 3FFFFC000000 uncachable
3 base 0000F4000000 mask 3FFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xc0000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fcf40] fcf40
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000c0000000
0000000000 - 00c0000000 page 2M
kernel direct mapping tables up to c0000000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-0000000f63000000
0100000000 - 0f63000000 page 2M
kernel direct mapping tables up to f63000000 @ bffc1000-c0000000
RAMDISK: 378b5000 - 37ff0000
ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
ACPI: XSDT 00000000fc006430 0004C (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc005ee0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc002c40 0321F (v02 Xen HVM 00000000 INTL 20090220)
ACPI: FACS 00000000fc002c00 00040
ACPI: APIC 00000000fc005fe0 00160 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: SRAT 00000000fc006140 00280 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: SLIT 00000000fc0063c0 00030 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc0063f0 00038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x20 -> Node 0
SRAT: PXM 0 -> APIC 0x22 -> Node 0
SRAT: PXM 0 -> APIC 0x24 -> Node 0
SRAT: PXM 0 -> APIC 0x26 -> Node 0
SRAT: PXM 0 -> APIC 0x28 -> Node 0
SRAT: PXM 0 -> APIC 0x2a -> Node 0
SRAT: PXM 0 -> APIC 0x2c -> Node 0
SRAT: PXM 0 -> APIC 0x2e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: PXM 0 -> APIC 0x21 -> Node 0
SRAT: PXM 0 -> APIC 0x23 -> Node 0
SRAT: PXM 0 -> APIC 0x25 -> Node 0
SRAT: PXM 0 -> APIC 0x27 -> Node 0
SRAT: PXM 0 -> APIC 0x29 -> Node 0
SRAT: PXM 0 -> APIC 0x2b -> Node 0
SRAT: PXM 0 -> APIC 0x2d -> Node 0
SRAT: PXM 0 -> APIC 0x2f -> Node 0
SRAT: Node 0 PXM 0 0-f0000000
SRAT: Node 0 PXM 0 100000000-f33000000
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [0,f0000000) + [100000000,f33000000) -> [0,f33000000)
NUMA: nodes only cover 61231MB of your 61999MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at 0000000000000000-0000000f63000000
Initmem setup node 0 0000000000000000-0000000f63000000
NODE_DATA [0000000f62ffb000 - 0000000f62ffffff]
[ffffea0000000000-ffffea003d9fffff] PMD -> [ffff880f25c00000-ffff880f625fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00f63000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000c0000
0: 0x00100000 -> 0x00f63000
On node 0 totalpages: 15871887
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 766016 pages, LIFO batch:31
Normal zone: 235712 pages used for memmap
Normal zone: 14849856 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
Allocating PCI resources starting at c0000000 (gap: c0000000:3c000000)
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880f25800000 s76032 r8192 d22272 u131072
pcpu-alloc: s76032 r8192 d22272 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 15619786
Policy zone: Normal
Kernel command line: root=LABEL=/ console=ttyS0 LANG=en_US.UTF-8 KEYTABLE=us
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 62408688k/64536576k available (3560k kernel code, 1049028k absent, 1078860k reserved, 3058k data, 540k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:1344 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2593.319 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.63 BogoMIPS (lpj=2593319)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
ACPI: Core revision 20110623
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: unsupported p6 CPU model 45 no PMU driver, software events only.
register_vcpu_info failed: err=-38
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
mce: CPU supports 0 MCE banks
#2
smpboot cpu 2: start_ip = 9a000
mce: CPU supports 0 MCE banks
#3
smpboot cpu 3: start_ip = 9a000
mce: CPU supports 0 MCE banks
TSC synchronization [CPU#0 -> CPU#3]:
Measured 116 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
#4
smpboot cpu 4: start_ip = 9a000
mce: CPU supports 0 MCE banks
#5
smpboot cpu 5: start_ip = 9a000
mce: CPU supports 0 MCE banks
#6
smpboot cpu 6: start_ip = 9a000
mce: CPU supports 0 MCE banks
#7
smpboot cpu 7: start_ip = 9a000
mce: CPU supports 0 MCE banks
#8
smpboot cpu 8: start_ip = 9a000
mce: CPU supports 0 MCE banks
#9
smpboot cpu 9: start_ip = 9a000
mce: CPU supports 0 MCE banks
#10
smpboot cpu 10: start_ip = 9a000
mce: CPU supports 0 MCE banks
#11
smpboot cpu 11: start_ip = 9a000
mce: CPU supports 0 MCE banks
#12
smpboot cpu 12: start_ip = 9a000
mce: CPU supports 0 MCE banks
#13
smpboot cpu 13: start_ip = 9a000
mce: CPU supports 0 MCE banks
#14
smpboot cpu 14: start_ip = 9a000
mce: CPU supports 0 MCE banks
#15
smpboot cpu 15: start_ip = 9a000
mce: CPU supports 0 MCE banks
#16
smpboot cpu 16: start_ip = 9a000
mce: CPU supports 0 MCE banks
#17
smpboot cpu 17: start_ip = 9a000
mce: CPU supports 0 MCE banks
#18
smpboot cpu 18: start_ip = 9a000
mce: CPU supports 0 MCE banks
#19
smpboot cpu 19: start_ip = 9a000
mce: CPU supports 0 MCE banks
#20
smpboot cpu 20: start_ip = 9a000
mce: CPU supports 0 MCE banks
#21
smpboot cpu 21: start_ip = 9a000
mce: CPU supports 0 MCE banks
#22
smpboot cpu 22: start_ip = 9a000
mce: CPU supports 0 MCE banks
#23
smpboot cpu 23: start_ip = 9a000
mce: CPU supports 0 MCE banks
#24
smpboot cpu 24: start_ip = 9a000
mce: CPU supports 0 MCE banks
#25
smpboot cpu 25: start_ip = 9a000
mce: CPU supports 0 MCE banks
#26
smpboot cpu 26: start_ip = 9a000
mce: CPU supports 0 MCE banks
#27
smpboot cpu 27: start_ip = 9a000
mce: CPU supports 0 MCE banks
#28
smpboot cpu 28: start_ip = 9a000
mce: CPU supports 0 MCE banks
#29
smpboot cpu 29: start_ip = 9a000
mce: CPU supports 0 MCE banks
#30
smpboot cpu 30: start_ip = 9a000
mce: CPU supports 0 MCE banks
#31 Ok.
smpboot cpu 31: start_ip = 9a000
mce: CPU supports 0 MCE banks
Brought up 32 CPUs
Total of 32 processors activated (165979.79 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xf4ffffff]
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc100-0xc10f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc1ffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xc3000000-0xc3000fff]
pci 0000:00:03.0: [5853:0001] type 0 class 0x00ff80
pci 0000:00:03.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 14: [mem 0xc2000000-0xc2ffffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 0000000f63000000 - 0000000f63ffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0xc0000000-0xf4ffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x10c0-0x10e1]
pnp 00:02: [io 0xb044-0xb047]
system 00:02: [io 0x10c0-0x10e1] has been reserved
system 00:02: [io 0xb044-0xb047] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0010-0x001f]
pnp 00:04: [io 0x0022-0x002d]
pnp 00:04: [io 0x0030-0x003f]
pnp 00:04: [io 0x0044-0x005f]
pnp 00:04: [io 0x0062-0x0063]
pnp 00:04: [io 0x0065-0x006f]
pnp 00:04: [io 0x0072-0x007f]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0084-0x0086]
pnp 00:04: [io 0x0088]
pnp 00:04: [io 0x008c-0x008e]
pnp 00:04: [io 0x0090-0x009f]
pnp 00:04: [io 0x00a2-0x00bd]
pnp 00:04: [io 0x00e0-0x00ef]
pnp 00:04: [io 0x08a0-0x08a3]
pnp 00:04: [io 0x0cc0-0x0ccf]
pnp 00:04: [io 0x04d0-0x04d1]
system 00:04: [io 0x08a0-0x08a3] has been reserved
system 00:04: [io 0x0cc0-0x0ccf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: [io 0x0480-0x048f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x03f0-0x03f5]
pnp 00:0a: [io 0x03f7]
pnp 00:0a: [irq 6]
pnp 00:0a: [dma 2]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x0378-0x037f]
pnp 00:0c: [irq 7]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xf4ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7404k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bbfc1000 - ffff8800bffc1000
software IO TLB at phys 0xbbfc1000 - 0xbffc1000
audit: initializing netlink socket (disabled)
type=2000 audit(1344676085.205:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
Grant table initialized
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
loop: module loaded
blkfront: xvda: barrier or flush: disabled
xvda: xvda1
Initialising Xen virtual ethernet driver.
Setting capacity to 16777216
xvda: detected capacity change from 0 to 8589934592
blkfront: xvdc: barrier or flush: disabled
xvdc: unknown partition table
Setting capacity to 1761475584
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
xvdc: detected capacity change from 0 to 901875499008
blkfront: xvdh: barrier or flush: disabled
xvdh: unknown partition table
Setting capacity to 209715200
xvdh: detected capacity change from 0 to 107374182400
XENBUS: Device with no driver: device/vfb/0
XENBUS: Device with no driver: device/console/0
Freeing unused kernel memory: 540k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 516k freed
Freeing unused kernel memory: 688k freed
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
udevd[866]: starting version 173
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-label/\x2f with -o noatime,ro
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/xvda1
dracut: Loading SELinux policy
dracut: /sbin/load_policy: Can't load policy: No such device
dracut: Switching root
udevd[1304]: starting version 173
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
SCSI subsystem initialized
EXT4-fs (xvda1): re-mounted. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (xvdc): using internal journal
EXT3-fs (xvdc): mounted filesystem with ordered data mode
NET: Registered protocol family 10
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
serial8250: too much work for irq4
EXT4-fs (xvdh): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (xvdh): Unaligned AIO/DIO on inode 535036 by fio; performance will be poor.
hrtimer: interrupt took 2913709 ns
INFO: task jbd2/xvdh-8:2066 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
jbd2/xvdh-8 D ffff880f17fe0398 0 2066 2 0x00000080
ffff880f1d7cfcd0 0000000000000046 0000000000000001 0000000000000010
0000000000000010 0000000100000000 ffff880f17fe0000 0000000000011c80
ffff880f1d7cffd8 ffff880f1d7ce010 ffff880f1d7cffd8 0000000000011c80
Call Trace:
[] schedule+0x3a/0x50
[] jbd2_journal_commit_transaction+0x1b6/0x17d0 [jbd2]
[] ? dequeue_task_fair+0x30f/0x320
[] ? finish_task_switch+0x57/0xd0
[] ? __schedule+0x3a4/0x840
[] ? wake_up_bit+0x40/0x40
[] ? lock_timer_base+0x37/0x70
[] kjournald2+0xd1/0x3a0 [jbd2]
[] ? wake_up_bit+0x40/0x40
[] ? commit_timeout+0x10/0x10 [jbd2]
[] kthread+0x96/0xa0
[] kernel_thread_helper+0x4/0x10
[] ? kthread_worker_fn+0x1a0/0x1a0
[] ? gs_change+0x13/0x13
INFO: task jbd2/xvdh-8:2066 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
jbd2/xvdh-8 D ffff880f17fe0398 0 2066 2 0x00000080
ffff880f1d7cfcd0 0000000000000046 0000000000000001 0000000000000010
0000000000000010 0000000100000000 ffff880f17fe0000 0000000000011c80
ffff880f1d7cffd8 ffff880f1d7ce010 ffff880f1d7cffd8 0000000000011c80
Call Trace:
[] schedule+0x3a/0x50
[] jbd2_journal_commit_transaction+0x1b6/0x17d0 [jbd2]
[] ? dequeue_task_fair+0x30f/0x320
[] ? finish_task_switch+0x57/0xd0
[] ? __schedule+0x3a4/0x840
[] ? wake_up_bit+0x40/0x40
[] ? lock_timer_base+0x37/0x70
[] kjournald2+0xd1/0x3a0 [jbd2]
[] ? wake_up_bit+0x40/0x40
[] ? commit_timeout+0x10/0x10 [jbd2]
[] kthread+0x96/0xa0
[] kernel_thread_helper+0x4/0x10
[] ? kthread_worker_fn+0x1a0/0x1a0
[] ? gs_change+0x13/0x13
INFO: task sync:11264 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffff880f16cd8398 0 11264 11113 0x00000080
ffff880ec18c5c98 0000000000000086 ffffffff810c9df2 0000000000000000
0000000000000002 ffff880f00000000 ffff880f16cd8000 0000000000011c80
ffff880ec18c5fd8 ffff880ec18c4010 ffff880ec18c5fd8 0000000000011c80
Call Trace:
[] ? find_get_page+0x32/0xa0
[] schedule+0x3a/0x50
[] schedule_timeout+0x1fd/0x270
[] ? pagevec_lookup_tag+0x20/0x30
[] ? write_cache_pages+0x12b/0x470
[] ? set_page_dirty+0x70/0x70
[] wait_for_common+0xd1/0x180
[] ? try_to_wake_up+0x2c0/0x2c0
[] wait_for_completion+0x18/0x20
[] writeback_inodes_sb_nr+0x7a/0xa0
[] writeback_inodes_sb+0x5a/0x70
[] ? __sync_filesystem+0x90/0x90
[] __sync_filesystem+0x49/0x90
[] sync_one_sb+0x17/0x20
[] iterate_supers+0x88/0xe0
[] sys_sync+0x2f/0x60
[] system_call_fastpath+0x16/0x1b
INFO: task sync:11803 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D ffff880d4ede9a18 0 11803 11599 0x00000080
ffff880d41c89c98 0000000000000082 ffff880d41c89c18 0000000000000000
0000000000000002 ffff880d00000000 ffff880d4ede9680 0000000000011c80
ffff880d41c89fd8 ffff880d41c88010 ffff880d41c89fd8 0000000000011c80
Call Trace:
[] schedule+0x3a/0x50
[] schedule_timeout+0x1fd/0x270
[] ? pagevec_lookup_tag+0x20/0x30
[] ? write_cache_pages+0x12b/0x470
[] ? set_page_dirty+0x70/0x70
[] wait_for_common+0xd1/0x180
[] ? try_to_wake_up+0x2c0/0x2c0
[] wait_for_completion+0x18/0x20
[] writeback_inodes_sb_nr+0x7a/0xa0
[] writeback_inodes_sb+0x5a/0x70
[] ? __sync_filesystem+0x90/0x90
[] __sync_filesystem+0x49/0x90
[] sync_one_sb+0x17/0x20
[] iterate_supers+0x88/0xe0
[] sys_sync+0x2f/0x60
[] system_call_fastpath+0x16/0x1b