dmesg - test001
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.10-1.9-default (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP Thu Apr 5 18:48:38 UTC 2012 (4a97ec8)
Command line: root=/dev/disk/by-id/ata-ST3500630AS_9QG0YF0Y-part5 resume=/dev/disk/by-id/ata-ST3500630AS_9QG0YF0Y-part12 splash=silent quiet vga=0x314
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.2 present.
DMI: /IN9 32X MAX(C55XE-MCP55XE), BIOS 6.00 PG 12/25/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask FE0000000 write-back
1 base 120000000 mask FF0000000 write-back
2 base 000000000 mask F80000000 write-back
3 base 080000000 mask FC0000000 write-back
4 base 0C0000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfff0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f3d90] f3d90
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000cfff0000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfff0000 page 4k
kernel direct mapping tables up to cfff0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ cffea000-cfff0000
RAMDISK: 37464000 - 37ff0000
ACPI: RSDP 00000000000f7de0 00014 (v00 Nvidia)
ACPI: RSDT 00000000cfff3040 00034 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: FACP 00000000cfff30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 - not using it (20110623/tbfadt-560)
ACPI: DSDT 00000000cfff3180 0587F (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfff0000 00040
ACPI: HPET 00000000cfff8b40 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
ACPI: MCFG 00000000cfff8bc0 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: APIC 00000000cfff8a40 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Initmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000012ffec000 - 000000012fffffff]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cfff0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048447
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833576 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfff0000 - 00000000cfff3000
PM: Registered nosave memory: 00000000cfff3000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000
PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s77952 r8192 d24448 u524288
pcpu-alloc: s77952 r8192 d24448 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031418
Policy zone: Normal
Kernel command line: root=/dev/disk/by-id/ata-ST3500630AS_9QG0YF0Y-part5 resume=/dev/disk/by-id/ata-ST3500630AS_9QG0YF0Y-part12 splash=silent quiet vga=0x314
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 4041712k/4980736k available (5420k kernel code, 786948k absent, 152076k reserved, 6045k data, 944k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2933.336 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.67 BogoMIPS (lpj=11733344)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.93GHz stepping 07
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
smpboot cpu 3: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (23466.96 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at cfff0000 (12288 bytes)
print_constraints: dummy:
RTC time: 7:50:10, date: 08/11/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [10de:03a1] type 0 class 0x000600
pci 0000:00:00.1: [10de:03ac] type 0 class 0x000500
pci 0000:00:00.2: [10de:03aa] type 0 class 0x000500
pci 0000:00:00.3: [10de:03a9] type 0 class 0x000500
pci 0000:00:00.4: [10de:03ab] type 0 class 0x000500
pci 0000:00:00.5: [10de:03a8] type 0 class 0x000500
pci 0000:00:00.6: [10de:03b5] type 0 class 0x000500
pci 0000:00:00.7: [10de:03b4] type 0 class 0x000500
pci 0000:00:01.0: [10de:03ad] type 0 class 0x000500
pci 0000:00:01.1: [10de:03ae] type 0 class 0x000500
pci 0000:00:01.2: [10de:03af] type 0 class 0x000500
pci 0000:00:01.3: [10de:03b0] type 0 class 0x000500
pci 0000:00:01.4: [10de:03b1] type 0 class 0x000500
pci 0000:00:01.5: [10de:03b2] type 0 class 0x000500
pci 0000:00:01.6: [10de:03b3] type 0 class 0x000500
pci 0000:00:02.0: [10de:03b6] type 0 class 0x000500
pci 0000:00:02.1: [10de:03bc] type 0 class 0x000500
pci 0000:00:02.2: [10de:03ba] type 0 class 0x000500
pci 0000:00:03.0: [10de:03b7] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:06.0: [10de:03b9] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:09.0: [10de:0369] type 0 class 0x000500
pci 0000:00:0a.0: [10de:0360] type 0 class 0x000601
pci 0000:00:0a.1: [10de:0368] type 0 class 0x000c05
pci 0000:00:0a.1: reg 10: [io 0xff00-0xff3f]
pci 0000:00:0a.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 24: [io 0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0a.2: [10de:036a] type 0 class 0x000500
pci 0000:00:0b.0: [10de:036c] type 0 class 0x000c03
pci 0000:00:0b.0: reg 10: [mem 0xeffff000-0xefffffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: [10de:036d] type 0 class 0x000c03
pci 0000:00:0b.1: reg 10: [mem 0xefffe000-0xefffe0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: [10de:036e] type 0 class 0x000101
pci 0000:00:0d.0: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:0e.0: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io 0xf700-0xf70f]
pci 0000:00:0e.0: reg 24: [mem 0xefffd000-0xefffdfff]
pci 0000:00:0e.1: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:0e.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:0e.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:0e.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:0e.1: reg 20: [io 0xf200-0xf20f]
pci 0000:00:0e.1: reg 24: [mem 0xefffc000-0xefffcfff]
pci 0000:00:0e.2: [10de:037f] type 0 class 0x000101
pci 0000:00:0e.2: reg 10: [io 0xf100-0xf107]
pci 0000:00:0e.2: reg 14: [io 0xf000-0xf003]
pci 0000:00:0e.2: reg 18: [io 0xef00-0xef07]
pci 0000:00:0e.2: reg 1c: [io 0xee00-0xee03]
pci 0000:00:0e.2: reg 20: [io 0xed00-0xed0f]
pci 0000:00:0e.2: reg 24: [mem 0xefffb000-0xefffbfff]
pci 0000:00:0f.0: [10de:0370] type 1 class 0x000604
pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
pci 0000:00:11.0: reg 10: [mem 0xefffa000-0xefffafff]
pci 0000:00:11.0: reg 14: [io 0xec00-0xec07]
pci 0000:00:11.0: reg 18: [mem 0xefff9000-0xefff90ff]
pci 0000:00:11.0: reg 1c: [mem 0xefff8000-0xefff800f]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:12.0: [10de:0373] type 0 class 0x000680
pci 0000:00:12.0: reg 10: [mem 0xefff7000-0xefff7fff]
pci 0000:00:12.0: reg 14: [io 0xeb00-0xeb07]
pci 0000:00:12.0: reg 18: [mem 0xefff6000-0xefff60ff]
pci 0000:00:12.0: reg 1c: [mem 0xefff5000-0xefff500f]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:18.0: [10de:0377] type 1 class 0x000604
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: PME# disabled
pci 0000:01:00.0: [10de:1180] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xed000000-0xedffffff]
pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xbf00-0xbf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xeeffc000-0xeeffffff]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xed000000-0xeeffffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:02:00.0: [1095:3132] type 0 class 0x000180
pci 0000:02:00.0: reg 10: [mem 0xefbff000-0xefbff07f 64bit]
pci 0000:02:00.0: reg 18: [mem 0xefbf8000-0xefbfbfff 64bit]
pci 0000:02:00.0: reg 20: [io 0xcf00-0xcf7f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:06.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
pci 0000:03:08.0: [104c:8023] type 0 class 0x000c00
pci 0000:03:08.0: reg 10: [mem 0xefeff000-0xefeff7ff]
pci 0000:03:08.0: reg 14: [mem 0xefef8000-0xefefbfff]
pci 0000:03:08.0: supports D1 D2
pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:08.0: PME# disabled
pci 0000:00:0f.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0f.0: bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:0f.0: bridge window [mem 0xefd00000-0xefdfffff pref]
pci 0000:00:0f.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci 0000:04:00.0: [10b5:8112] type 1 class 0x000604
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:18.0: PCI bridge to [bus 04-05]
pci 0000:00:18.0: bridge window [io 0xa000-0xafff]
pci 0000:00:18.0: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:00:18.0: bridge window [mem 0xef900000-0xef9fffff 64bit pref]
pci 0000:05:04.0: [13f6:8788] type 0 class 0x000401
pci 0000:05:04.0: reg 10: [io 0xae00-0xaeff]
pci 0000:05:04.0: supports D1 D2
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io 0xa000-0xafff]
pci 0000:04:00.0: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:04:00.0: bridge window [mem 0xef900000-0xef9fffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 00000000cfff0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [io 0x1c00-0x1c80 window]
pnp 00:00: [mem 0xfec80000-0xfecbffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0xa0000000-0x9fffffff disabled]
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [irq 3]
pnp 00:02: Plug and Play ACPI device, IDs ABT2005 (active)
pnp 00:03: [io 0x0010-0x001f]
pnp 00:03: [io 0x0022-0x003f]
pnp 00:03: [io 0x0044-0x005f]
pnp 00:03: [io 0x0062-0x0063]
pnp 00:03: [io 0x0065-0x006f]
pnp 00:03: [io 0x0074-0x007f]
pnp 00:03: [io 0x0091-0x0093]
pnp 00:03: [io 0x00a2-0x00bf]
pnp 00:03: [io 0x04d0-0x04d1]
pnp 00:03: [io 0x0295-0x0314]
pnp 00:03: [io 0x0880-0x088f]
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0295-0x0314] has been reserved
system 00:03: [io 0x0880-0x088f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x0090]
pnp 00:04: [io 0x0094-0x009f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [irq 0 disabled]
pnp 00:05: [irq 8]
pnp 00:05: [mem 0xfeff0000-0xfeff03ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io 0x0070-0x0073]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #3
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
Switched to NOHz mode on CPU #2
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [mem 0xf0000000-0xf1ffffff]
system 00:0a: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000f0000-0x000fffff]
pnp 00:0b: [mem 0xfeff0000-0xfeff00ff]
pnp 00:0b: [mem 0xcfff0000-0xcfffffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xcffeffff]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xfeff0000-0xfeff03ff]
system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:0b: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:0b: [mem 0xcfff0000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcffeffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xed000000-0xeeffffff]
pci 0000:00:03.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xefc00000-0xefc7ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:06.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
pci 0000:00:0f.0: PCI bridge to [bus 03-03]
pci 0000:00:0f.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0f.0: bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:0f.0: bridge window [mem 0xefd00000-0xefdfffff pref]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io 0xa000-0xafff]
pci 0000:04:00.0: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:04:00.0: bridge window [mem 0xef900000-0xef9fffff pref]
pci 0000:00:18.0: PCI bridge to [bus 04-05]
pci 0000:00:18.0: bridge window [io 0xa000-0xafff]
pci 0000:00:18.0: bridge window [mem 0xefa00000-0xefafffff]
pci 0000:00:18.0: bridge window [mem 0xef900000-0xef9fffff 64bit pref]
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:0f.0: setting latency timer to 64
pci 0000:00:18.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
pci 0000:04:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xed000000-0xeeffffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xefb00000-0xefbfffff]
pci_bus 0000:02: resource 2 [mem 0xefc00000-0xefcfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xefe00000-0xefefffff]
pci_bus 0000:03: resource 2 [mem 0xefd00000-0xefdfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xefa00000-0xefafffff]
pci_bus 0000:04: resource 2 [mem 0xef900000-0xef9fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xefa00000-0xefafffff]
pci_bus 0000:05: resource 2 [mem 0xef900000-0xef9fffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11824k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800cbfea000 - ffff8800cffea000
software IO TLB at phys 0xcbfea000 - 0xcffea000
audit: initializing netlink socket (disabled)
type=2000 audit(1344671409.624:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7917
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pcieport 0000:00:18.0: setting latency timer to 64
pcieport 0000:00:18.0: irq 42 for MSI/MSI-X
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe7000000, mapped to 0xffffc90003100000, using 1875k, total 14336k
bootsplash 3.2.0-2010/03/31: looking for picture...
bootsplash: silentjpeg size 68948 bytes
bootsplash: ...found (800x600, 30646 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3500630AS_9QG0YF0Y-part12
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:366:824
rtc_cmos 00:06: setting system clock to 2012-08-11 07:50:10 UTC (1344671410)
Freeing unused kernel memory: 944k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 704k freed
Freeing unused kernel memory: 148k freed
sata_sil24 0000:02:00.0: version 1.1
ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
sata_sil24 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
sata_sil24 0000:02:00.0: setting latency timer to 64
scsi0 : sata_sil24
scsi1 : sata_sil24
ata1: SATA max UDMA/100 host m128@0xefbff000 port 0xefbf8000 irq 16
ata2: SATA max UDMA/100 host m128@0xefbff000 port 0xefbfa000 irq 16
Refined TSC clocksource calibration: 2933.333 MHz.
Switching to clocksource tsc
ata1: SATA link down (SStatus 0 SControl 0)
ata2: SATA link down (SStatus 0 SControl 0)
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata4: port disabled--ignoring
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 23
ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 22
ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 22
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi8 : sata_nv
scsi9 : sata_nv
ata9: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 21
ata10: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 21
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
ata7.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/66
ata7.00: configured for UDMA/133
ata5.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10.00: ATA-8: ST31500341AS, CC1J, max UDMA/133
ata10.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata10.00: configured for UDMA/133
scsi 9:0:0:0: Direct-Access ATA ST31500341AS CC1J PQ: 0 ANSI: 5
sd 9:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 9:0:0:0: [sde] Write Protect is off
sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 9:0:0:0: [sde] Attached SCSI disk
udevd[103]: starting version 173
ACPI: acpi_idle registered with cpuidle
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 20, io mem 0xefffe000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.10-1.9-default ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xeffff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.10-1.9-default ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-8: new high speed USB device number 3 using ehci_hcd
usb 1-8: New USB device found, idVendor=0424, idProduct=2502
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 2 ports detected
usb 2-4: new low speed USB device number 2 using ohci_hcd
usb 2-4: New USB device found, idVendor=046d, idProduct=c069
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Laser Mouse
usb 2-4: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input1
generic-usb 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:0b.0-4/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-8.1: new high speed USB device number 4 using ehci_hcd
usb 1-8.1: New USB device found, idVendor=0424, idProduct=2602
usb 1-8.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-8.1:1.0: USB hub found
hub 1-8.1:1.0: 4 ports detected
usb 1-8.1.1: new high speed USB device number 5 using ehci_hcd
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Marking nosave pages: 00000000cfff0000 - 0000000100000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
usb 1-8.1.1: New USB device found, idVendor=0424, idProduct=2228
usb 1-8.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8.1.1: Product: Flash Card Reader
usb 1-8.1.1: Manufacturer: Generic
usb 1-8.1.1: SerialNumber: 26020128B005
usb 1-8.1.3: new high speed USB device number 6 using ehci_hcd
usb 1-8.1.3: New USB device found, idVendor=0781, idProduct=b7bd
usb 1-8.1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 1-8.1.3: Product: SDDR-189
usb 1-8.1.3: Manufacturer: SanDisk
usb 1-8.1.3: SerialNumber: 2008102301130
PM: Starting manual resume from disk
PM: Hibernation image partition 8:12 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
systemd[1]: Set hostname to .
systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides name cupsd.service, ignoring: File exists
systemd-readahead-replay[436]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
udevd[459]: starting version 173
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:11.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /devices/platform/pcspkr/input/input2
NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
snd_hda_intel 0000:01:00.1: PCI INT B -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
hda_intel: Disabling MSI
snd_hda_intel 0000:01:00.1: setting latency timer to 64
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
scsi10 : usb-storage 1-8.1.1:1.0
scsi11 : usb-storage 1-8.1.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ALSA hda_intel.c:1454 Enable delay in RIRB handling
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
firewire_ohci 0000:03:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:03:08.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:03:08.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
boot.lvm[495]: Waiting for udev to settle...
boot.localnet[557]: Using boot-specified hostname 'lxf92.site'
boot.localnet[557]: Setting up hostname 'lxf92'..done
HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:50:8d:9c:2e:fe
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim desc-v3
ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:12.0: setting latency timer to 64
boot.localnet[557]: Setting up loopback interface RTNETLINK answers: File exists
boot.localnet[557]: ..done
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: Attached scsi generic sg3 type 0
scsi 8:0:0:0: Attached scsi generic sg4 type 5
sd 9:0:0:0: Attached scsi generic sg5 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
firewire_core: created device fw0: GUID 00508d00009948ce, S400
input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input5
input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input6
input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg6 type 0
scsi 11:0:0:0: Direct-Access SanDisk mSD SDDR-189 1804 PQ: 0 ANSI: 0
sd 11:0:0:0: Attached scsi generic sg7 type 0
scsi 11:0:0:1: Direct-Access SanDisk SD SDDR-189 1804 PQ: 0 ANSI: 0
sd 11:0:0:1: Attached scsi generic sg8 type 0
scsi 11:0:0:2: Direct-Access SanDisk MSxDSDDR-189 1804 PQ: 0 ANSI: 0
sd 11:0:0:2: Attached scsi generic sg9 type 0
sd 11:0:0:0: [sdg] Attached SCSI removable disk
scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
sd 10:0:0:1: Attached scsi generic sg10 type 0
sd 11:0:0:1: [sdh] Attached SCSI removable disk
scsi 11:0:0:3: Direct-Access SanDisk CF SDDR-189 1804 PQ: 0 ANSI: 0
sd 11:0:0:3: Attached scsi generic sg11 type 0
sd 11:0:0:2: [sdi] Attached SCSI removable disk
sd 11:0:0:3: [sdk] Attached SCSI removable disk
forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:50:8d:9c:2e:ff
forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:1: [sdj] Attached SCSI removable disk
snd_virtuoso 0000:05:04.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
snd_virtuoso 0000:05:04.0: setting latency timer to 64
ifup[850]: Service network not started and mode 'auto' -> skipping
ifup[852]: Service network not started and mode 'auto' -> skipping
BIOS EDD facility v0.16 2004-Jun-25, 5 devices found
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
Adding 4192252k swap on /dev/sda12. Priority:0 extents:1 across:4192252k
boot.lvm[495]: Scanning for LVM volume groups...
boot.lvm[495]: /dev/sdf: open failed: No medium found
boot.lvm[495]: /dev/sdg: open failed: No medium found
boot.lvm[495]: /dev/sdh: open failed: No medium found
boot.lvm[495]: /dev/sdi: open failed: No medium found
boot.lvm[495]: /dev/sdj: open failed: No medium found
boot.lvm[495]: /dev/sdk: open failed: No medium found
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
boot.lvm[495]: Reading all physical volumes. This may take a while...
boot.lvm[495]: Found volume group "rkvg" using metadata type lvm2
boot.lvm[495]: Activating LVM volume groups...
boot.lvm[495]: 1 logical volume(s) in volume group "rkvg" now active
boot.lvm[495]: ..done
systemd-fsck[986]: /dev/sda6: clean, 51/17928 files, 57773/71680 blocks
systemd-fsck[990]: /dev/mapper/rkvg-rklv: clean, 1103314/139771904 files, 337199416/559069184 blocks
systemd-fsck[992]: /dev/sda9: clean, 8872/328320 files, 254584/1310720 blocks
fuse init (API version 7.17)
systemd-fsck[998]: /dev/sda10: clean, 698/328320 files, 296201/1310720 blocks
systemd-fsck[987]: /dev/sde1: clean, 1125325/91578368 files, 161047304/366284000 blocks
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-fsck[996]: /dev/sda11: clean, 83/655360 files, 80013/2620416 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs (sde1): using internal journal
EXT3-fs (sde1): mounted filesystem with ordered data mode
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl,user_xattr
ntfs-3g[1047]: Version 2011.4.12 integrated FUSE 27
ntfs-3g[1047]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1)
ntfs-3g[1047]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=en_GB.UTF-8
ntfs-3g[1047]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda1,blkdev,blksize=4096,default_permissions
ntfs-3g[1047]: Global ownership and permissions enforced, configuration type 1
ntfs-3g[1047]: Warning : using problematic uid==0 and gid!=0
systemd-fsck[1002]: /dev/sda8: clean, 2962/328320 files, 447738/1310720 blocks
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
microcode: CPU0 sig=0x6f7, pf=0x10, revision=0x60
microcode: CPU1 sig=0x6f7, pf=0x10, revision=0x60
microcode: CPU2 sig=0x6f7, pf=0x10, revision=0x60
microcode: CPU3 sig=0x6f7, pf=0x10, revision=0x60
microcode: Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x6a, date = 2010-10-02
microcode: CPU1 updated to revision 0x6a, date = 2010-10-02
microcode: CPU2 updated to revision 0x6a, date = 2010-10-02
microcode: CPU3 updated to revision 0x6a, date = 2010-10-02
microcode.ctl[1078]: Checking/updating CPU microcode ..done
rc.cpufreq[1113]: CPU frequency scaling is not supported by your processor.
rc.cpufreq[1114]: boot with 'CPUFREQ=no' in to avoid this warning.
cpufreq[1097]: Loading CPUFreq modules - hardware support not available..skipped
NET: Registered protocol family 17
systemd[1]: NetworkManager.service: control process exited, code=exited status=1
systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'.
systemd[1]: Unit NetworkManager.service entered failed state.
bootsplash: status on console 0 changed to on
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (dm-0): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda9): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda11): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda10): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda8): re-mounted. Opts: acl,user_xattr,commit=0