Xorg.0.log - corsair
X.Org X Server 1.11.3
Release Date: 2011-12-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
Current Operating System: Linux thierry-desktop 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64
Build Date: 26 June 2012 06:59:03AM
xorg-server 2:1.11.4-0ubuntu10.3 (For technical support please see )
Current version of pixman: 0.24.4
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 1 17:21:57 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[1]-0" (0)
(**) | |-->Monitor ""
(**) | |-->Device "amdcccle-Device[1]-0"
(==) No monitor specified for screen "amdcccle-Screen[1]-0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
(==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7fbd827fab00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 11.0
X.Org XInput driver : 16.0
X.Org Server Extension : 6.0
(--) PCI:*(0:1:0:0) 1002:6738:174b:e178 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
(II) Module glx: vendor="Advanced Micro Devices, Inc."
compiled for 6.9.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.2.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.96.4
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.96.4
(II) ATI Proprietary Linux Driver Version Identifier:8.96.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.96.7
(II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50
(++) using VT number 7
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x6738) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:5:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:6:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:7:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
(II) fglrx(0): pEnt->device->identifier=0x7fbd82946990
(II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 11.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.96.4
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(**) fglrx(0): NoAccel = NO
(**) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series" (Chipset = 0x6738)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe178)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xfea20000
(--) fglrx(0): I/O port at 0x0000e000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 11.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 13.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: BARTS
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 84.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP3 has no monitor section
(II) fglrx(0): Output DFP4 has no monitor section
(II) fglrx(0): Output DFP5 has no monitor section
(II) fglrx(0): Output DFP6 has no monitor section
(II) fglrx(0): Output DFP7 has no monitor section
(II) fglrx(0): Output DFP8 has no monitor section
(II) fglrx(0): Output DFP9 using monitor section 0-DFP9
(**) fglrx(0): Option "PreferredMode" "1920x1080"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP10 using monitor section 0-DFP10
(**) fglrx(0): Option "PreferredMode" "1680x1050"
(**) fglrx(0): Option "Position" "1920 10"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP11 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP9
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM Model: 56f5 Serial#: 270257
(II) fglrx(0): Year: 2009 Week: 4
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
(II) fglrx(0): Monitor name: W2453
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 74.2 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 74.2 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
(II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 27.0 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
(II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff001e6df556b11f0400
(II) fglrx(0): 0413010380351e780aaec5a2574a9c25
(II) fglrx(0): 125054210800b3008180814001010101
(II) fglrx(0): 0101010101011a3680a070381f403020
(II) fglrx(0): 3500132b2100001a023a801871382d40
(II) fglrx(0): 582c4500132b2100001e000000fd0038
(II) fglrx(0): 3d1e530f000a202020202020000000fc
(II) fglrx(0): 0057323435330a2020202020202001aa
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP10
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 4ea Serial#: 1129132594
(II) fglrx(0): Year: 2009 Week: 28
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605
(II) fglrx(0): blueX: 0.151 blueY: 0.073 whiteX: 0.312 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 119.0 MHz Image Size: 478 x 300 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 125 Hz, H min: 30 H max: 190 kHz, PixClock max 335 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 238.5 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 218.6 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 198.7 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2dea0432324d43
(II) fglrx(0): 1c13010380301e782a78f1a655489b26
(II) fglrx(0): 12505400000001010101010101010101
(II) fglrx(0): 0101010101017c2e90a0601a1e403020
(II) fglrx(0): 3600de2c1100001a000000fd00387d1e
(II) fglrx(0): be21000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 0048564d533730313638360a202001dc
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): EDID for output DFP2
(II) fglrx(0): EDID for output DFP3
(II) fglrx(0): EDID for output DFP4
(II) fglrx(0): EDID for output DFP5
(II) fglrx(0): EDID for output DFP6
(II) fglrx(0): EDID for output DFP7
(II) fglrx(0): EDID for output DFP8
(II) fglrx(0): EDID for output DFP9
(II) fglrx(0): Manufacturer: GSM Model: 56f5 Serial#: 270257
(II) fglrx(0): Year: 2009 Week: 4
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
(II) fglrx(0): Monitor name: W2453
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 74.2 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 74.2 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
(II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 27.0 MHz Image Size: 531 x 299 mm
(II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
(II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff001e6df556b11f0400
(II) fglrx(0): 0413010380351e780aaec5a2574a9c25
(II) fglrx(0): 125054210800b3008180814001010101
(II) fglrx(0): 0101010101011a3680a070381f403020
(II) fglrx(0): 3500132b2100001a023a801871382d40
(II) fglrx(0): 582c4500132b2100001e000000fd0038
(II) fglrx(0): 3d1e530f000a202020202020000000fc
(II) fglrx(0): 0057323435330a2020202020202001aa
(II) fglrx(0): Printing probed modes for output DFP9
(II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
(II) fglrx(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz)
(II) fglrx(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.8 kHz)
(II) fglrx(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1085 1095 1125 interlace +hsync +vsync (28.1 kHz)
(II) fglrx(0): Modeline "1920x1080"x59.9 74.18 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.7 kHz)
(II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz)
(II) fglrx(0): Modeline "1776x1000"x59.9 148.35 1776 1864 1908 2200 1000 1004 1009 1125 +hsync +vsync (67.4 kHz)
(II) fglrx(0): Modeline "1776x1000"x50.0 74.25 1776 2304 2348 2640 1000 1005 1015 1125 interlace +hsync +vsync (28.1 kHz)
(II) fglrx(0): Modeline "1776x1000"x59.9 74.18 1776 1864 1908 2200 1000 1005 1015 1125 interlace +hsync +vsync (33.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x60.0 148.50 1280 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x960"x60.0 148.50 1280 2008 2052 2200 960 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0 148.50 1280 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) fglrx(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0 148.50 1024 2008 2052 2200 768 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz)
(II) fglrx(0): Modeline "1152x648"x59.9 74.18 1152 1262 1302 1650 648 653 658 750 +hsync +vsync (45.0 kHz)
(II) fglrx(0): Modeline "800x600"x60.0 148.50 800 2008 2052 2200 600 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "720x480"x60.0 148.50 720 2008 2052 2200 480 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "640x480"x60.0 148.50 640 2008 2052 2200 480 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) fglrx(0): EDID for output DFP10
(II) fglrx(0): Manufacturer: SAM Model: 4ea Serial#: 1129132594
(II) fglrx(0): Year: 2009 Week: 28
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605
(II) fglrx(0): blueX: 0.151 blueY: 0.073 whiteX: 0.312 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 119.0 MHz Image Size: 478 x 300 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 125 Hz, H min: 30 H max: 190 kHz, PixClock max 335 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 238.5 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 218.6 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 198.7 MHz Image Size: 478 x 296 mm
(II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2dea0432324d43
(II) fglrx(0): 1c13010380301e782a78f1a655489b26
(II) fglrx(0): 12505400000001010101010101010101
(II) fglrx(0): 0101010101017c2e90a0601a1e403020
(II) fglrx(0): 3600de2c1100001a000000fd00387d1e
(II) fglrx(0): be21000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 0048564d533730313638360a202001dc
(II) fglrx(0): Printing probed modes for output DFP10
(II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x1024"x60.0 119.00 1280 1728 1760 1840 1024 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x960"x60.0 119.00 1280 1728 1760 1840 960 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x800"x60.0 119.00 1280 1728 1760 1840 800 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0 119.00 1280 1728 1760 1840 768 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0 119.00 1280 1728 1760 1840 720 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0 119.00 1024 1728 1760 1840 768 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "800x600"x60.0 119.00 800 1728 1760 1840 600 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "640x480"x60.0 119.00 640 1728 1760 1840 480 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): EDID for output DFP11
(II) fglrx(0): EDID for output CRT1
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP3 disconnected
(II) fglrx(0): Output DFP4 disconnected
(II) fglrx(0): Output DFP5 disconnected
(II) fglrx(0): Output DFP6 disconnected
(II) fglrx(0): Output DFP7 disconnected
(II) fglrx(0): Output DFP8 disconnected
(II) fglrx(0): Output DFP9 connected
(II) fglrx(0): Output DFP10 connected
(II) fglrx(0): Output DFP11 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP9 using initial mode 1920x1080
(II) fglrx(0): Output DFP10 using initial mode 1680x1050
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 2 displays connected.
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Desktop Vsync is enabled.
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fbd7d0f0000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.96.4
(II) fglrx(0): Date: Mar 12 2012
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-26-generic
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01ab8000
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 592
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.0.0
(II) Loading extension AMDXVOPL
(II) Loading extension AMDXVBA
(II) fglrx(0): UVD feature is enabled(II) fglrx(0):
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP10 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 19, (OK)
ukiOpenByBusid: ukiOpenMinor returns 19
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Desktop Vsync is enabled.
(II) fglrx(0): Setting screen physical size to 952 x 285
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 2.7.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 16.0
(II) Using input driver 'evdev' for 'Power Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "nodeadkeys"
(II) XKB: reuse xkmfile /var/lib/xkb/server-F15AB95C7B1236857FE3747DF1E6D38A9A2917AA.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Logitech USB Receiver'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Logitech USB Receiver: always reports core events
(**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
(--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
(--) evdev: Logitech USB Receiver: Found 12 mouse buttons
(--) evdev: Logitech USB Receiver: Found scroll wheel(s)
(--) evdev: Logitech USB Receiver: Found relative axes
(--) evdev: Logitech USB Receiver: Found x and y relative axes
(II) evdev: Logitech USB Receiver: Configuring as mouse
(II) evdev: Logitech USB Receiver: Adding scrollwheel support
(**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2/event2"
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
(II) evdev: Logitech USB Receiver: initialized for relative axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(**) Logitech USB Receiver: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HID 6666:0667 (/dev/input/event3)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HID 6666:0667 (/dev/input/js0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Compaq Compaq Internet Keyboard (/dev/input/event4)
(**) Compaq Compaq Internet Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Compaq Compaq Internet Keyboard'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Compaq Compaq Internet Keyboard: always reports core events
(**) evdev: Compaq Compaq Internet Keyboard: Device: "/dev/input/event4"
(--) evdev: Compaq Compaq Internet Keyboard: Vendor 0x49f Product 0xe
(--) evdev: Compaq Compaq Internet Keyboard: Found keys
(II) evdev: Compaq Compaq Internet Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input4/event4"
(II) XINPUT: Adding extended input device "Compaq Compaq Internet Keyboard" (type: KEYBOARD, id 9)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device Compaq Compaq Internet Keyboard (/dev/input/event5)
(**) Compaq Compaq Internet Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Compaq Compaq Internet Keyboard'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Compaq Compaq Internet Keyboard: always reports core events
(**) evdev: Compaq Compaq Internet Keyboard: Device: "/dev/input/event5"
(--) evdev: Compaq Compaq Internet Keyboard: Vendor 0x49f Product 0xe
(--) evdev: Compaq Compaq Internet Keyboard: Found keys
(II) evdev: Compaq Compaq Internet Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input5/event5"
(II) XINPUT: Adding extended input device "Compaq Compaq Internet Keyboard" (type: KEYBOARD, id 10)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event14)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.11.3, module version = 0.14.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 16.0
(II) Using input driver 'wacom' for 'Wacom Bamboo'
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(**) Wacom Bamboo: always reports core events
(**) Option "Device" "/dev/input/event14"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(--) Wacom Bamboo stylus: using pressure threshold of 27 for button 1
(--) Wacom Bamboo stylus: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
(II) Wacom Bamboo stylus: hotplugging dependent devices.
(EE) Wacom Bamboo stylus: Invalid type 'touch' for this device.
(II) Wacom Bamboo stylus: hotplugging completed.
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input7/event14"
(II) XINPUT: Adding extended input device "Wacom Bamboo stylus" (type: STYLUS, id 11)
(**) Wacom Bamboo stylus: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo stylus: (accel) acceleration profile 0
(**) Wacom Bamboo stylus: (accel) acceleration factor: 2.000
(**) Wacom Bamboo stylus: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line-Out Side (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line-Out CLFE (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line-Out Surround (/dev/input/event12)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line-Out Front (/dev/input/event13)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
(**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Eee PC WMI hotkeys: always reports core events
(**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event16"
(--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
(--) evdev: Eee PC WMI hotkeys: Found keys
(II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input16/event16"
(II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_variant" "nodeadkeys"
(**) Wacom Bamboo eraser: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo eraser: Applying InputClass "Wacom class"
(II) Using input driver 'wacom' for 'Wacom Bamboo eraser'
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(**) Wacom Bamboo eraser: always reports core events
(**) Option "Device" "/dev/input/event14"
(**) Option "Type" "eraser"
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input7/event14"
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER, id 13)
(**) Wacom Bamboo eraser: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo eraser: (accel) acceleration profile 0
(**) Wacom Bamboo eraser: (accel) acceleration factor: 2.000
(**) Wacom Bamboo eraser: (accel) acceleration threshold: 4
(**) Wacom Bamboo cursor: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo cursor: Applying InputClass "Wacom class"
(II) Using input driver 'wacom' for 'Wacom Bamboo cursor'
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(**) Wacom Bamboo cursor: always reports core events
(**) Option "Device" "/dev/input/event14"
(**) Option "Type" "cursor"
(--) Wacom Bamboo cursor: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input7/event14"
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR, id 14)
(**) Wacom Bamboo cursor: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo cursor: (accel) acceleration profile 0
(**) Wacom Bamboo cursor: (accel) acceleration factor: 2.000
(**) Wacom Bamboo cursor: (accel) acceleration threshold: 4
(**) Wacom Bamboo pad: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo pad: Applying InputClass "Wacom class"
(II) Using input driver 'wacom' for 'Wacom Bamboo pad'
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(**) Wacom Bamboo pad: always reports core events
(**) Option "Device" "/dev/input/event14"
(**) Option "Type" "pad"
(--) Wacom Bamboo pad: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input7/event14"
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD, id 15)
(**) Wacom Bamboo pad: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo pad: (accel) acceleration profile 0
(**) Wacom Bamboo pad: (accel) acceleration factor: 2.000
(**) Wacom Bamboo pad: (accel) acceleration threshold: 4
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) XKB: reuse xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
(II) XKB: reuse xkmfile /var/lib/xkb/server-5AFF89C3CA0C56149066F6F772E656530730947E.xkm
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) XKB: reuse xkmfile /var/lib/xkb/server-A7A058788C6D66D3B1E85AB86376BA911B8CF239.xkm
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)
(II) fglrx(0): EDID vendor "SAM", prod id 1258
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 238.46 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (129.6 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 218.59 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (118.8 kHz)
(II) fglrx(0): Modeline "1680x1050"x0.0 198.72 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (108.0 kHz)