dmesg - ext4_raid0hard
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic root=/dev/mapper/almalabo1-root ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Dell Inc. PowerEdge 2950/0PR278, BIOS 1.1.0 06/21/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffa8 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa8000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffa8000 page 4k
[ 0.000000] kernel direct mapping tables up to cffa8000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cffa2000-cffa8000
[ 0.000000] RAMDISK: 363d6000 - 371e3000
[ 0.000000] ACPI: RSDP 00000000000f2a00 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f2a80 0004C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000000f2b88 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cffa8000 02A90 (v01 DELL PE_SC3 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000cffb7c00 00040
[ 0.000000] ACPI: APIC 00000000000f2c7c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000000f2d5d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000000f2dad 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000000f2de5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cffa8
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048376
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831464 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 104
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000
[ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000
[ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83072 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028914
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic root=/dev/mapper/almalabo1-root ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4030792k/4980736k available (6566k kernel code, 787232k absent, 162712k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1832 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.894 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.78 BogoMIPS (lpj=7979576)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004048] Security Framework initialized
[ 0.004070] AppArmor: AppArmor initialized
[ 0.004074] Yama: becoming mindful.
[ 0.004581] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006693] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008542] Mount-cache hash table entries: 256
[ 0.008742] Initializing cgroup subsys cpuacct
[ 0.008754] Initializing cgroup subsys memory
[ 0.008767] Initializing cgroup subsys devices
[ 0.008771] Initializing cgroup subsys freezer
[ 0.008775] Initializing cgroup subsys blkio
[ 0.008788] Initializing cgroup subsys perf_event
[ 0.008828] CPU: Physical Processor ID: 0
[ 0.008832] CPU: Processor Core ID: 0
[ 0.008836] mce: CPU supports 6 MCE banks
[ 0.008847] CPU0: Thermal monitoring enabled (TM1)
[ 0.008853] using mwait in idle threads.
[ 0.011721] ACPI: Core revision 20110623
[ 0.012969] ftrace: allocating 27049 entries in 107 pages
[ 0.016521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057978] CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148159] #2
[ 0.148162] smpboot cpu 2: start_ip = 9a000
[ 0.240049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240203] #3
[ 0.240206] smpboot cpu 3: start_ip = 9a000
[ 0.332043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332076] Brought up 4 CPUs
[ 0.332080] Total of 4 processors activated (15959.98 BogoMIPS).
[ 0.336266] devtmpfs: initialized
[ 0.337210] EVM: security.selinux
[ 0.337213] EVM: security.SMACK64
[ 0.337216] EVM: security.capability
[ 0.337386] print_constraints: dummy:
[ 0.337386] RTC time: 7:42:28, date: 06/29/12
[ 0.337386] NET: Registered protocol family 16
[ 0.337386] Trying to unpack rootfs image as initramfs...
[ 0.337386] ACPI: bus type pci registered
[ 0.337386] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.337386] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.377601] PCI: Using configuration type 1 for base access
[ 0.377613] PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
[ 0.379083] bio: create slab at 0
[ 0.379083] ACPI: Added _OSI(Module Device)
[ 0.379083] ACPI: Added _OSI(Processor Device)
[ 0.379083] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.379083] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.379083] ACPI: EC: Look up EC in DSDT
[ 0.380963] ACPI: Interpreter enabled
[ 0.380971] ACPI: (supports S0 S4 S5)
[ 0.380992] ACPI: Using IOAPIC for interrupt routing
[ 0.384798] ACPI: No dock devices found.
[ 0.384804] HEST: Table not found.
[ 0.384809] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.384909] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.385095] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.385099] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.385102] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.385105] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfdffffff] (ignored)
[ 0.385121] pci 0000:00:00.0: [8086:25c0] type 0 class 0x000600
[ 0.385173] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.385178] pci 0000:00:00.0: PME# disabled
[ 0.385203] pci 0000:00:02.0: [8086:25e2] type 1 class 0x000604
[ 0.385250] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.385253] pci 0000:00:02.0: PME# disabled
[ 0.385272] pci 0000:00:03.0: [8086:25e3] type 1 class 0x000604
[ 0.385319] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.385322] pci 0000:00:03.0: PME# disabled
[ 0.385341] pci 0000:00:04.0: [8086:25f8] type 1 class 0x000604
[ 0.385388] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.385392] pci 0000:00:04.0: PME# disabled
[ 0.385411] pci 0000:00:05.0: [8086:25e5] type 1 class 0x000604
[ 0.385457] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.385461] pci 0000:00:05.0: PME# disabled
[ 0.385479] pci 0000:00:06.0: [8086:25f9] type 1 class 0x000604
[ 0.385526] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.385530] pci 0000:00:06.0: PME# disabled
[ 0.385548] pci 0000:00:07.0: [8086:25e7] type 1 class 0x000604
[ 0.385594] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.385598] pci 0000:00:07.0: PME# disabled
[ 0.385620] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600
[ 0.385650] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600
[ 0.385683] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600
[ 0.385720] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600
[ 0.385751] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600
[ 0.385783] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600
[ 0.385813] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600
[ 0.385854] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604
[ 0.385927] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.385931] pci 0000:00:1c.0: PME# disabled
[ 0.385958] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
[ 0.386000] pci 0000:00:1d.0: reg 20: [io 0xdce0-0xdcff]
[ 0.386034] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
[ 0.386075] pci 0000:00:1d.1: reg 20: [io 0xdcc0-0xdcdf]
[ 0.386111] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
[ 0.386152] pci 0000:00:1d.2: reg 20: [io 0xdca0-0xdcbf]
[ 0.386197] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
[ 0.386216] pci 0000:00:1d.7: reg 10: [mem 0xfc600000-0xfc6003ff]
[ 0.386301] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.386306] pci 0000:00:1d.7: PME# disabled
[ 0.386325] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.386388] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
[ 0.386475] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
[ 0.386489] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.386499] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.386509] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.386519] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.386529] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.386913] pci 0000:06:00.0: [8086:3500] type 1 class 0x000604
[ 0.389948] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.390039] pci 0000:06:00.0: PME# disabled
[ 0.390911] pci 0000:06:00.3: [8086:350c] type 1 class 0x000604
[ 0.394180] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 0.394271] pci 0000:06:00.3: PME# disabled
[ 0.394960] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.395192] pci 0000:00:02.0: PCI bridge to [bus 06-0b]
[ 0.395200] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
[ 0.397032] pci 0000:07:00.0: [8086:3510] type 1 class 0x000604
[ 0.400436] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.400531] pci 0000:07:00.0: PME# disabled
[ 0.401078] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.401446] pci 0000:07:01.0: [8086:3514] type 1 class 0x000604
[ 0.404895] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.404986] pci 0000:07:01.0: PME# disabled
[ 0.405491] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.406868] pci 0000:06:00.0: PCI bridge to [bus 07-0a]
[ 0.407052] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.409355] pci 0000:08:00.0: [1166:0103] type 1 class 0x000604
[ 0.412299] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.412391] pci 0000:08:00.0: PME# disabled
[ 0.413079] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.413309] pci 0000:07:00.0: PCI bridge to [bus 08-09]
[ 0.413492] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.415420] pci 0000:09:00.0: [14e4:164c] type 0 class 0x000200
[ 0.416207] pci 0000:09:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.419741] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.419832] pci 0000:09:00.0: PME# disabled
[ 0.421539] pci 0000:08:00.0: PCI bridge to [bus 09-09]
[ 0.421814] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.424071] pci 0000:07:01.0: PCI bridge to [bus 0a-0a]
[ 0.427880] pci 0000:06:00.3: PCI bridge to [bus 0b-0b]
[ 0.428704] pci 0000:01:00.0: [8086:0370] type 1 class 0x000604
[ 0.428772] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.428777] pci 0000:01:00.0: PME# disabled
[ 0.428801] pci 0000:01:00.2: [8086:0372] type 1 class 0x000604
[ 0.428866] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 0.428870] pci 0000:01:00.2: PME# disabled
[ 0.428887] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.428902] pci 0000:00:03.0: PCI bridge to [bus 01-03]
[ 0.428910] pci 0000:00:03.0: bridge window [mem 0xfc300000-0xfc5fffff]
[ 0.428915] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.428979] pci 0000:02:0e.0: [1028:0015] type 0 class 0x000104
[ 0.429003] pci 0000:02:0e.0: reg 10: [mem 0xd80f0000-0xd80fffff pref]
[ 0.429023] pci 0000:02:0e.0: reg 18: [mem 0xfc4e0000-0xfc4fffff]
[ 0.429060] pci 0000:02:0e.0: reg 30: [mem 0xfc500000-0xfc507fff pref]
[ 0.429108] pci 0000:02:0e.0: supports D1
[ 0.429139] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 0.429147] pci 0000:01:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.429154] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.429221] pci 0000:01:00.2: PCI bridge to [bus 03-03]
[ 0.429267] pci 0000:00:04.0: PCI bridge to [bus 0c-0c]
[ 0.429303] pci 0000:00:05.0: PCI bridge to [bus 0d-0d]
[ 0.429339] pci 0000:00:06.0: PCI bridge to [bus 0e-0e]
[ 0.429376] pci 0000:00:07.0: PCI bridge to [bus 0f-0f]
[ 0.429437] pci 0000:04:00.0: [1166:0103] type 1 class 0x000604
[ 0.429524] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.429530] pci 0000:04:00.0: PME# disabled
[ 0.429550] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.429562] pci 0000:00:1c.0: PCI bridge to [bus 04-05]
[ 0.429570] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.429632] pci 0000:05:00.0: [14e4:164c] type 0 class 0x000200
[ 0.429659] pci 0000:05:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.429769] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.429774] pci 0000:05:00.0: PME# disabled
[ 0.429832] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.429844] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.429915] pci 0000:10:0d.0: [1002:515e] type 0 class 0x000300
[ 0.429934] pci 0000:10:0d.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.429945] pci 0000:10:0d.0: reg 14: [io 0xec00-0xecff]
[ 0.429956] pci 0000:10:0d.0: reg 18: [mem 0xfc1f0000-0xfc1fffff]
[ 0.429992] pci 0000:10:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.430024] pci 0000:10:0d.0: supports D1 D2
[ 0.430055] pci 0000:00:1e.0: PCI bridge to [bus 10-10] (subtractive decode)
[ 0.430063] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.430067] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
[ 0.430074] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.430077] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.430080] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.430114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.430391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.430464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
[ 0.430514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
[ 0.430582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
[ 0.430647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.430712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
[ 0.430767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.430834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.430898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
[ 0.430962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 0.431009] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.431016] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.431021] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.434792] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.434869] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.434943] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
[ 0.435014] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.435089] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.435159] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.435228] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.435300] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.435437] vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.435437] vgaarb: loaded
[ 0.435437] vgaarb: bridge control possible 0000:10:0d.0
[ 0.435437] i2c-core: driver [aat2870] using legacy suspend method
[ 0.435437] i2c-core: driver [aat2870] using legacy resume method
[ 0.435437] SCSI subsystem initialized
[ 0.435437] libata version 3.00 loaded.
[ 0.435437] usbcore: registered new interface driver usbfs
[ 0.435437] usbcore: registered new interface driver hub
[ 0.435437] usbcore: registered new device driver usb
[ 0.436071] PCI: Using ACPI for IRQ routing
[ 0.442145] PCI: pci_cache_line_size set to 64 bytes
[ 0.442761] reserve RAM buffer: 00000000cffa8000 - 00000000cfffffff
[ 0.442910] NetLabel: Initializing
[ 0.442914] NetLabel: domain hash size = 128
[ 0.442917] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.442933] NetLabel: unlabeled traffic allowed by default
[ 0.442961] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.442961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.442961] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.456164] Switching to clocksource hpet
[ 0.465539] AppArmor: AppArmor Filesystem Enabled
[ 0.465592] pnp: PnP ACPI init
[ 0.465614] ACPI: bus type pnp registered
[ 0.465743] pnp 00:00: [bus 00-ff]
[ 0.465747] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.465750] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.465752] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.465755] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.465757] pnp 00:00: [mem 0xd0000000-0xfdffffff window]
[ 0.465819] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.465877] pnp 00:01: [io 0x0080-0x009f]
[ 0.465879] pnp 00:01: [io 0x0000-0x001f]
[ 0.465881] pnp 00:01: [io 0x00c0-0x00df]
[ 0.465884] pnp 00:01: [dma 4]
[ 0.465922] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.465947] pnp 00:02: [io 0x00f0-0x00ff]
[ 0.465959] pnp 00:02: [irq 13]
[ 0.465992] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.466019] pnp 00:03: [io 0x0061]
[ 0.466106] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.466129] pnp 00:04: [io 0x0070-0x007f]
[ 0.466135] pnp 00:04: [irq 8]
[ 0.466175] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.466405] pnp 00:05: [io 0x03f0-0x03f5]
[ 0.466408] pnp 00:05: [io 0x03f7]
[ 0.466415] pnp 00:05: [irq 6]
[ 0.466417] pnp 00:05: [dma 2]
[ 0.466493] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.466657] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.466663] pnp 00:06: [irq 4]
[ 0.466771] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.466934] pnp 00:07: [io 0x02f8-0x02ff]
[ 0.466943] pnp 00:07: [irq 3]
[ 0.467052] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.469035] pnp 00:08: [io 0x0800-0x087f]
[ 0.469038] pnp 00:08: [io 0x0880-0x08bf]
[ 0.469040] pnp 00:08: [io 0x08c0-0x08df]
[ 0.469043] pnp 00:08: [io 0x08e0-0x08e3]
[ 0.469045] pnp 00:08: [io 0x0c00-0x0c7f]
[ 0.469047] pnp 00:08: [io 0x0ca0-0x0ca7]
[ 0.469049] pnp 00:08: [io 0x0ca9-0x0cab]
[ 0.469051] pnp 00:08: [io 0x0cad-0x0caf]
[ 0.469053] pnp 00:08: [io 0x0060]
[ 0.469055] pnp 00:08: [io 0x0064]
[ 0.469123] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.469129] system 00:08: [io 0x0880-0x08bf] has been reserved
[ 0.469135] system 00:08: [io 0x08c0-0x08df] has been reserved
[ 0.469139] system 00:08: [io 0x08e0-0x08e3] has been reserved
[ 0.469144] system 00:08: [io 0x0c00-0x0c7f] has been reserved
[ 0.469149] system 00:08: [io 0x0ca0-0x0ca7] has been reserved
[ 0.469153] system 00:08: [io 0x0ca9-0x0cab] has been reserved
[ 0.469158] system 00:08: [io 0x0cad-0x0caf] has been reserved
[ 0.469164] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.469223] pnp 00:09: [io 0x0ca8]
[ 0.469225] pnp 00:09: [io 0x0cac]
[ 0.469292] system 00:09: [io 0x0ca8] has been reserved
[ 0.469297] system 00:09: [io 0x0cac] has been reserved
[ 0.469303] system 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
[ 0.469369] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.469442] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.469449] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.469489] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.469532] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.469706] pnp: PnP ACPI: found 12 devices
[ 0.469711] ACPI: ACPI bus type pnp unregistered
[ 0.477632] PCI: max bus depth: 4 pci_try_num: 5
[ 0.479041] pci 0000:08:00.0: PCI bridge to [bus 09-09]
[ 0.479155] pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.479429] pci 0000:07:00.0: PCI bridge to [bus 08-09]
[ 0.479567] pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.479842] pci 0000:07:01.0: PCI bridge to [bus 0a-0a]
[ 0.480256] pci 0000:06:00.0: PCI bridge to [bus 07-0a]
[ 0.480394] pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.480669] pci 0000:06:00.3: PCI bridge to [bus 0b-0b]
[ 0.481082] pci 0000:00:02.0: PCI bridge to [bus 06-0b]
[ 0.481088] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
[ 0.481097] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 0.481104] pci 0000:01:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
[ 0.481111] pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.481119] pci 0000:01:00.2: PCI bridge to [bus 03-03]
[ 0.481131] pci 0000:00:03.0: PCI bridge to [bus 01-03]
[ 0.481137] pci 0000:00:03.0: bridge window [mem 0xfc300000-0xfc5fffff]
[ 0.481143] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.481151] pci 0000:00:04.0: PCI bridge to [bus 0c-0c]
[ 0.481161] pci 0000:00:05.0: PCI bridge to [bus 0d-0d]
[ 0.481170] pci 0000:00:06.0: PCI bridge to [bus 0e-0e]
[ 0.481180] pci 0000:00:07.0: PCI bridge to [bus 0f-0f]
[ 0.481191] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.481198] pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.481211] pci 0000:00:1c.0: PCI bridge to [bus 04-05]
[ 0.481218] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.481232] pci 0000:10:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref]
[ 0.481238] pci 0000:00:1e.0: PCI bridge to [bus 10-10]
[ 0.481243] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.481250] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
[ 0.481257] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.481302] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.481310] pci 0000:00:02.0: setting latency timer to 64
[ 0.481405] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.481495] pci 0000:06:00.0: setting latency timer to 64
[ 0.481634] pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.481724] pci 0000:07:00.0: setting latency timer to 64
[ 0.481954] pci 0000:08:00.0: setting latency timer to 64
[ 0.482093] pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.482183] pci 0000:07:01.0: setting latency timer to 64
[ 0.482413] pci 0000:06:00.3: setting latency timer to 64
[ 0.482462] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.482468] pci 0000:00:03.0: setting latency timer to 64
[ 0.482476] pci 0000:01:00.0: setting latency timer to 64
[ 0.482483] pci 0000:01:00.2: setting latency timer to 64
[ 0.482489] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.482495] pci 0000:00:04.0: setting latency timer to 64
[ 0.482501] pci 0000:00:05.0: setting latency timer to 64
[ 0.482507] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.482513] pci 0000:00:06.0: setting latency timer to 64
[ 0.482519] pci 0000:00:07.0: setting latency timer to 64
[ 0.482526] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.482532] pci 0000:00:1c.0: setting latency timer to 64
[ 0.482541] pci 0000:04:00.0: setting latency timer to 64
[ 0.482549] pci 0000:00:1e.0: setting latency timer to 64
[ 0.482553] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.482556] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.482559] pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff]
[ 0.482563] pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.482566] pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.482568] pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.482571] pci_bus 0000:01: resource 1 [mem 0xfc300000-0xfc5fffff]
[ 0.482575] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.482579] pci_bus 0000:02: resource 1 [mem 0xfc400000-0xfc5fffff]
[ 0.482582] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[ 0.482585] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.482589] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.482591] pci_bus 0000:10: resource 0 [io 0xe000-0xefff]
[ 0.482595] pci_bus 0000:10: resource 1 [mem 0xfc100000-0xfc2fffff]
[ 0.482598] pci_bus 0000:10: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.482602] pci_bus 0000:10: resource 4 [io 0x0000-0xffff]
[ 0.482605] pci_bus 0000:10: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.482673] NET: Registered protocol family 2
[ 0.482885] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.484240] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.487767] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.488278] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.488283] TCP reno registered
[ 0.488298] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.488341] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.488517] NET: Registered protocol family 1
[ 0.488588] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.488608] pci 0000:00:1d.0: PCI INT A disabled
[ 0.488622] pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.488640] pci 0000:00:1d.1: PCI INT B disabled
[ 0.488650] pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.488667] pci 0000:00:1d.2: PCI INT C disabled
[ 0.488678] pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.488722] pci 0000:00:1d.7: PCI INT A disabled
[ 0.488732] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.488742] pci 0000:01:00.0: rerouting interrupts for [8086:0370]
[ 0.488749] pci 0000:01:00.2: rerouting interrupts for [8086:0372]
[ 0.488998] pci 0000:10:0d.0: Boot video device
[ 0.489002] PCI: CLS 64 bytes, default 64
[ 0.489005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.489009] Placing 64MB software IO TLB between ffff8800cbfa2000 - ffff8800cffa2000
[ 0.489015] software IO TLB at phys 0xcbfa2000 - 0xcffa2000
[ 0.489558] audit: initializing netlink socket (disabled)
[ 0.489571] type=2000 audit(1340955747.484:1): initialized
[ 0.531637] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.566922] VFS: Disk quotas dquot_6.5.2
[ 0.567003] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.567702] fuse init (API version 7.17)
[ 0.567821] msgmni has been set to 7872
[ 0.568376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.568428] io scheduler noop registered
[ 0.568432] io scheduler deadline registered
[ 0.568479] io scheduler cfq registered (default)
[ 0.568803] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.568862] pcieport 0000:00:1c.0: irq 104 for MSI/MSI-X
[ 0.573069] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.573102] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.573181] intel_idle: MWAIT substates: 0x20
[ 0.573184] intel_idle: does not run on family 6 model 15
[ 0.573278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.573288] ACPI: Power Button [PWRF]
[ 0.576219] ERST: Table is not found!
[ 0.576224] GHES: HEST is not enabled!
[ 0.596702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.676354] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.676575] Freeing initrd memory: 14388k freed
[ 0.832571] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.888423] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.924273] Linux agpgart interface v0.103
[ 0.926181] brd: module loaded
[ 0.927181] loop: module loaded
[ 0.927387] ata_piix 0000:00:1f.1: version 2.13
[ 0.927400] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.927443] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.927850] scsi0 : ata_piix
[ 0.927951] scsi1 : ata_piix
[ 0.928016] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.928022] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.928202] ata2: port disabled--ignoring
[ 0.928438] Fixed MDIO Bus: probed
[ 0.928469] tun: Universal TUN/TAP device driver, 1.6
[ 0.928473] tun: (C) 1999-2004 Max Krasnyansky
[ 0.928531] PPP generic driver version 2.4.2
[ 0.928651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.928672] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.928699] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.928703] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.928764] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.928797] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.932689] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.932706] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000
[ 0.948012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.948168] hub 1-0:1.0: USB hub found
[ 0.948176] hub 1-0:1.0: 6 ports detected
[ 0.948283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.948302] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.948322] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.948331] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.948335] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.948387] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.948414] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0
[ 0.948563] hub 2-0:1.0: USB hub found
[ 0.948570] hub 2-0:1.0: 2 ports detected
[ 0.948650] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.948660] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.948663] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.948720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.948755] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0
[ 0.948899] hub 3-0:1.0: USB hub found
[ 0.948905] hub 3-0:1.0: 2 ports detected
[ 0.948987] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.948997] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.949001] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.949055] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.949085] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
[ 0.949228] hub 4-0:1.0: USB hub found
[ 0.949240] hub 4-0:1.0: 2 ports detected
[ 0.949369] usbcore: registered new interface driver libusual
[ 0.949418] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.952039] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.952061] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.952290] mousedev: PS/2 mouse device common for all mice
[ 0.952453] rtc_cmos 00:04: RTC can wake from S4
[ 0.952585] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.952612] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.952731] device-mapper: uevent: version 1.0.3
[ 0.952826] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.952839] cpuidle: using governor ladder
[ 0.952843] cpuidle: using governor menu
[ 0.952846] EFI Variables Facility v0.08 2004-May-17
[ 0.953144] TCP cubic registered
[ 0.953282] NET: Registered protocol family 10
[ 0.953863] NET: Registered protocol family 17
[ 0.953888] Registering the dns_resolver key type
[ 0.954050] PM: Hibernation image not present or could not be loaded.
[ 0.954067] registered taskstats version 1
[ 0.980087] Magic number: 0:604:724
[ 0.980114] block loop4: hash matches
[ 0.980209] rtc_cmos 00:04: setting system clock to 2012-06-29 07:42:28 UTC (1340955748)
[ 0.980244] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.980248] EDD information not available.
[ 1.092300] ata1.00: ATAPI: HL-DT-ST DVD-ROM GDR-8084N, 1.01, max UDMA/33
[ 1.108182] ata1.00: configured for UDMA/33
[ 1.113139] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5
[ 1.118214] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.118220] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.118369] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.118471] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.120382] Freeing unused kernel memory: 920k freed
[ 1.120726] Write protecting the kernel read-only data: 12288k
[ 1.126940] Freeing unused kernel memory: 1608k freed
[ 1.132065] Freeing unused kernel memory: 1196k freed
[ 1.151459] udevd[98]: starting version 175
[ 1.184617] Floppy drive(s): fd0 is 1.44M
[ 1.187034] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
[ 1.187070] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.188423] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[ 1.188452] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
[ 1.188465] megaraid_sas 0000:02:0e.0: PCI IRQ 78 -> rerouted to legacy IRQ 18
[ 1.188484] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.188616] megasas: FW now in Ready state
[ 1.202091] FDC 0 is a post-1991 82077
[ 1.236033] megasas_init_mfi: fw_support_ieee=0
[ 1.236039] megasas: INIT adapter done
[ 1.308039] scsi2 : LSI SAS based MegaRAID driver
[ 1.308046] megaraid_sas: fw state:c0000000
[ 1.308052] megasas: fwstate:c0000000, dis_OCR=0
[ 1.308805] scsi 2:0:0:0: Direct-Access MAXTOR ATLAS10K5_147SAS BP00 PQ: 0 ANSI: 5
[ 1.309399] scsi 2:0:1:0: Direct-Access MAXTOR ATLAS10K5_147SAS BP00 PQ: 0 ANSI: 5
[ 1.309859] scsi 2:0:2:0: Direct-Access HITACHI HUS156030VLS600 E516 PQ: 0 ANSI: 6
[ 1.310435] scsi 2:0:3:0: Direct-Access MAXTOR ATLAS10K5_073SAS BP00 PQ: 0 ANSI: 5
[ 1.316024] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 1.383428] scsi 2:0:8:0: Enclosure DP BACKPLANE 1.00 PQ: 0 ANSI: 5
[ 1.405908] scsi 2:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
[ 1.406089] scsi 2:2:1:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
[ 1.422533] scsi 2:0:8:0: Attached scsi generic sg1 type 13
[ 1.422812] sd 2:2:0:0: Attached scsi generic sg2 type 0
[ 1.422817] sd 2:2:0:0: [sda] 570949632 512-byte logical blocks: (292 GB/272 GiB)
[ 1.422955] sd 2:2:0:0: [sda] Write Protect is off
[ 1.422961] sd 2:2:0:0: [sda] Mode Sense: 1f 00 00 08
[ 1.423058] sd 2:2:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 1.423328] sd 2:2:1:0: [sdb] 142082048 512-byte logical blocks: (72.7 GB/67.7 GiB)
[ 1.423458] sd 2:2:1:0: [sdb] Write Protect is off
[ 1.423464] sd 2:2:1:0: [sdb] Mode Sense: 1f 00 00 08
[ 1.423478] sd 2:2:1:0: Attached scsi generic sg3 type 0
[ 1.423540] sd 2:2:1:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 1.423821] sda: unknown partition table
[ 1.424193] sdb: sdb1 sdb2 < sdb5 >
[ 1.424505] sd 2:2:0:0: [sda] Attached SCSI disk
[ 1.424799] sd 2:2:1:0: [sdb] Attached SCSI disk
[ 1.448683] hub 1-5:1.0: USB hub found
[ 1.448766] hub 1-5:1.0: 4 ports detected
[ 1.488031] Refined TSC clocksource calibration: 1995.020 MHz.
[ 1.488045] Switching to clocksource tsc
[ 1.616325] ses 2:0:8:0: Attached Enclosure device
[ 1.668637] bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:13:72:39:77:a2
[ 1.668739] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.688023] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 1.768873] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.149506] bnx2 0000:09:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:13:72:39:77:a4
[ 4.024168] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.024177] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4.029266] udevd[329]: starting version 175
[ 4.041714] lp: driver loaded but no devices found
[ 4.049902] Adding 4190204k swap on /dev/mapper/almalabo1-swap_1. Priority:-1 extents:1 across:4190204k
[ 4.056613] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.098074] EDAC MC: Ver: 2.1.0
[ 4.108706] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
[ 4.109015] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 4.112894] intel_rng: FWH not detected
[ 4.123376] type=1400 audit(1340955751.637:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
[ 4.123851] type=1400 audit(1340955751.637:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[ 4.124135] type=1400 audit(1340955751.641:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[ 4.157453] [drm] Initialized drm 1.1.0 20060810
[ 4.178060] [drm] radeon defaulting to kernel modesetting.
[ 4.178064] [drm] radeon kernel modesetting enabled.
[ 4.178172] radeon 0000:10:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.178548] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2).
[ 4.178582] [drm] register mmio base: 0xFC1F0000
[ 4.178584] [drm] register mmio size: 65536
[ 4.178849] radeon 0000:10:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
[ 4.178853] radeon 0000:10:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[ 4.178863] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.178865] [drm] Driver supports precise vblank timestamp query.
[ 4.178890] [drm] radeon: irq initialized.
[ 4.182433] [drm] Detected VRAM RAM=128M, BAR=128M
[ 4.182437] [drm] RAM width 16bits DDR
[ 4.183445] [TTM] Zone kernel: Available graphics memory: 2024452 kiB.
[ 4.183449] [TTM] Initializing pool allocator.
[ 4.183487] [drm] radeon: 16M of VRAM memory ready
[ 4.183490] [drm] radeon: 512M of GTT memory ready.
[ 4.183514] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.205401] [drm] PCIE GART of 512M enabled (table at 0x0000000036E00000).
[ 4.205914] radeon 0000:10:0d.0: WB disabled
[ 4.209484] [drm] Loading R100 Microcode
[ 4.225180] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
[ 4.225295] generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-2/input0
[ 4.235991] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.240258] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 4.250574] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input2
[ 4.252257] generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-2/input1
[ 4.252309] usbcore: registered new interface driver usbhid
[ 4.252311] usbhid: USB HID core driver
[ 4.334808] [drm] radeon: ring at 0x00000000B0001000
[ 4.334831] [drm] ring test succeeded in 1 usecs
[ 4.334957] [drm] radeon: ib pool ready.
[ 4.335081] [drm] ib test succeeded in 0 usecs
[ 4.335323] [drm] Radeon Display Connectors
[ 4.335325] [drm] Connector 0:
[ 4.335327] [drm] VGA
[ 4.335329] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 4.335331] [drm] Encoders:
[ 4.335333] [drm] CRT1: INTERNAL_DAC1
[ 4.343788] bnx2 0000:05:00.0: irq 105 for MSI/MSI-X
[ 4.416678] [drm] fb mappable at 0xD0040000
[ 4.416682] [drm] vram apper at 0xD0000000
[ 4.416684] [drm] size 786432
[ 4.416685] [drm] fb depth is 8
[ 4.416687] [drm] pitch is 1024
[ 4.416786] fbcon: radeondrmfb (fb0) is primary device
[ 4.464014] bnx2 0000:05:00.0: eth0: using MSI
[ 4.464532] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.565935] Console: switching to colour frame buffer device 128x48
[ 4.573477] fb0: radeondrmfb frame buffer device
[ 4.573480] drm: registered panic notifier
[ 4.573492] [drm] Initialized radeon 2.12.0 20080528 for 0000:10:0d.0 on minor 0
[ 4.622760] init: failsafe main process (855) killed by TERM signal
[ 4.693651] type=1400 audit(1340955752.209:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=945 comm="apparmor_parser"
[ 4.693853] type=1400 audit(1340955752.209:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=943 comm="apparmor_parser"
[ 4.694341] type=1400 audit(1340955752.209:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=943 comm="apparmor_parser"
[ 4.694612] type=1400 audit(1340955752.209:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=943 comm="apparmor_parser"
[ 7.660055] bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[ 7.660591] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.320006] eth0: no IPv6 routers present
[ 34.089732] SPL: Loaded module v0.6.0-rc9, using hostid 0xe39ec801
[ 34.090153] zunicode: module license 'CDDL' taints kernel.
[ 34.090156] Disabling lock debugging due to kernel taint
[ 34.148533] ZFS: Loaded module v0.6.0-rc9, ZFS pool version 28, ZFS filesystem version 5
[ 168.691454] init: tty1 main process ended, respawning
[ 513.330158] sda: sda1 sda9
[ 5897.970224] sda: sda1
[ 5921.362145] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)