dmesg - unigine_trinity
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf9bf000 (usable)
[ 0.000000] BIOS-e820: 00000000bf9bf000 - 00000000bfabf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfabf000 - 00000000bfbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfbbf000 - 00000000bfbff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfbff000 - 00000000bfc00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfc00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: AMD PUMORI/Pumori, BIOS RPM1000D 12/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfc00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] kernel direct mapping tables up to bfc00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ bf9bd000-bf9bf000
[ 0.000000] RAMDISK: 364e8000 - 3726c000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 00000000bfbfe120 0008C (v01 INSYDE IS CRB 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bfbfc000 000F4 (v04 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bfbec000 0B261 (v01 INSYDE IS CRB F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bfb7a000 00040
[ 0.000000] ACPI: UEFI 00000000bfbfd000 00236 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000bfbfb000 00038 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000bfbfa000 00084 (v02 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000bfbf9000 0003C (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000bfbf8000 000A5 (v32 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bfbeb000 00028 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: SPCR 00000000bfbea000 00050 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bfbe8000 00044 (v01 INSYDE IS CRB 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bfbe7000 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000bfbe5000 01E1D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: CRAT 00000000bfbe4000 00258 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: BGRT 00000000bfbe3000 00038 (v00 INSYDE H2O BIOS 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf9bf
[ 0.000000] 0: 0x000bfbff -> 0x000bfc00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 911695
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 764416 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf9bf000 - 00000000bfabf000
[ 0.000000] PM: Registered nosave memory: 00000000bfabf000 - 00000000bfbbf000
[ 0.000000] PM: Registered nosave memory: 00000000bfbbf000 - 00000000bfbff000
[ 0.000000] PM: Registered nosave memory: 00000000bfc00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 893322
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3493264k/4702208k available (6566k kernel code, 1055428k absent, 153516k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 29360128 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2295.875 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.75 BogoMIPS (lpj=9183500)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004029] Security Framework initialized
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004042] Yama: becoming mindful.
[ 0.004460] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008921] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009392] Mount-cache hash table entries: 256
[ 0.009507] Initializing cgroup subsys cpuacct
[ 0.009512] Initializing cgroup subsys memory
[ 0.009520] Initializing cgroup subsys devices
[ 0.009522] Initializing cgroup subsys freezer
[ 0.009524] Initializing cgroup subsys blkio
[ 0.009529] Initializing cgroup subsys perf_event
[ 0.009554] tseg: 00bfc00000
[ 0.009555] CPU: Physical Processor ID: 0
[ 0.009556] CPU: Processor Core ID: 0
[ 0.009558] mce: CPU supports 7 MCE banks
[ 0.011059] ACPI: Core revision 20110623
[ 0.017276] ftrace: allocating 27049 entries in 107 pages
[ 0.020484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061853] CPU0: AMD Eng Sample, ZM232263C4450_32/23/16_9900_654 stepping 00
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152030] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152127] #2
[ 0.152128] smpboot cpu 2: start_ip = 9a000
[ 0.244030] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244111] #3 Ok.
[ 0.244112] smpboot cpu 3: start_ip = 9a000
[ 0.336034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336053] Brought up 4 CPUs
[ 0.336056] Total of 4 processors activated (18366.04 BogoMIPS).
[ 0.336875] devtmpfs: initialized
[ 0.337120] EVM: security.selinux
[ 0.337121] EVM: security.SMACK64
[ 0.337123] EVM: security.capability
[ 0.337279] PM: Registering ACPI NVS region at bfabf000 (1048576 bytes)
[ 0.337279] print_constraints: dummy:
[ 0.337279] RTC time: 11:18:10, date: 06/27/12
[ 0.337279] NET: Registered protocol family 16
[ 0.339244] Trying to unpack rootfs image as initramfs...
[ 0.337292] Extended Config Space enabled on 0 nodes
[ 0.337321] ACPI: bus type pci registered
[ 0.337457] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.337461] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.349033] PCI: Using configuration type 1 for base access
[ 0.350102] bio: create slab at 0
[ 0.350102] ACPI: Added _OSI(Module Device)
[ 0.350102] ACPI: Added _OSI(Processor Device)
[ 0.350102] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.350102] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.352745] ACPI: EC: Look up EC in DSDT
[ 0.355262] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.361383] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.432832] ACPI: Interpreter enabled
[ 0.432837] ACPI: (supports S0 S3 S4 S5)
[ 0.432861] ACPI: Using IOAPIC for interrupt routing
[ 0.433508] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.433670] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.433849] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.444601] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.445059] ACPI: No dock devices found.
[ 0.445062] HEST: Table not found.
[ 0.445065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.445451] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.445727] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.445731] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.445735] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.445738] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.445742] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.445745] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.445748] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.445752] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.445755] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.445758] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.445761] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.445765] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.445768] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.445771] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.445774] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.445778] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.445781] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
[ 0.445784] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[ 0.445792] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf9ff])
[ 0.445807] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
[ 0.445903] pci 0000:00:01.0: [1002:9900] type 0 class 0x000300
[ 0.445916] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.445923] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.445930] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 0.445972] pci 0000:00:01.0: supports D1 D2
[ 0.445989] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
[ 0.445998] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 0.446046] pci 0000:00:01.1: supports D1 D2
[ 0.446116] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
[ 0.446181] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.446186] pci 0000:00:04.0: PME# disabled
[ 0.446251] pci 0000:00:06.0: [1022:1416] type 1 class 0x000604
[ 0.446296] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.446299] pci 0000:00:06.0: PME# disabled
[ 0.446316] pci 0000:00:07.0: [1022:1417] type 1 class 0x000604
[ 0.446361] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.446364] pci 0000:00:07.0: PME# disabled
[ 0.446456] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
[ 0.446479] pci 0000:00:10.0: reg 10: [mem 0xf0448000-0xf0449fff 64bit]
[ 0.446585] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.446591] pci 0000:00:10.0: PME# disabled
[ 0.446630] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
[ 0.446652] pci 0000:00:10.1: reg 10: [mem 0xf044a000-0xf044bfff 64bit]
[ 0.446765] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.446770] pci 0000:00:10.1: PME# disabled
[ 0.446810] pci 0000:00:11.0: [1022:7804] type 0 class 0x000106
[ 0.446830] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.446840] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.446850] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.446860] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.446870] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.446880] pci 0000:00:11.0: reg 24: [mem 0xf0452000-0xf04527ff]
[ 0.446940] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 0.446956] pci 0000:00:12.0: reg 10: [mem 0xf0451000-0xf0451fff]
[ 0.447035] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 0.447054] pci 0000:00:12.2: reg 10: [mem 0xf0450000-0xf04500ff]
[ 0.447137] pci 0000:00:12.2: supports D1 D2
[ 0.447140] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.447144] pci 0000:00:12.2: PME# disabled
[ 0.447167] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 0.447184] pci 0000:00:13.0: reg 10: [mem 0xf044f000-0xf044ffff]
[ 0.447262] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 0.447282] pci 0000:00:13.2: reg 10: [mem 0xf044e000-0xf044e0ff]
[ 0.447368] pci 0000:00:13.2: supports D1 D2
[ 0.447372] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.447377] pci 0000:00:13.2: PME# disabled
[ 0.447401] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 0.447481] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 0.447506] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.447575] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.447579] pci 0000:00:14.2: PME# disabled
[ 0.447593] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 0.447675] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 0.447722] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
[ 0.447736] pci 0000:00:14.5: reg 10: [mem 0xf044d000-0xf044dfff]
[ 0.447803] pci 0000:00:14.7: [1022:7806] type 0 class 0x000805
[ 0.447821] pci 0000:00:14.7: reg 10: [mem 0xf044c000-0xf044c0ff 64bit]
[ 0.447888] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
[ 0.447918] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
[ 0.447938] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
[ 0.447967] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
[ 0.447996] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
[ 0.448024] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
[ 0.448157] pci 0000:01:00.0: [1969:1083] type 0 class 0x000200
[ 0.448179] pci 0000:01:00.0: reg 10: [mem 0xf0300000-0xf033ffff 64bit]
[ 0.448191] pci 0000:01:00.0: reg 18: [io 0x3000-0x307f]
[ 0.448292] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448298] pci 0000:01:00.0: PME# disabled
[ 0.456052] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.456059] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 0.456064] pci 0000:00:04.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.456103] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.456110] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.456146] pci 0000:00:07.0: PCI bridge to [bus 03-06]
[ 0.456151] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.456156] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.456162] pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.456286] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.456297] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.456301] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.456305] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.456309] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.456312] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.456316] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.456319] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.456323] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.456327] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.456330] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.456334] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.456337] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.456341] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.456344] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.456348] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.456351] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.456355] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.456425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.456620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.456707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.456768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.456918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.457103] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.457312] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.470620] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.470705] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.470794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.470876] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.470943] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.471000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.471052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.471103] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.471288] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.471288] vgaarb: loaded
[ 0.471288] vgaarb: bridge control possible 0000:00:01.0
[ 0.471288] i2c-core: driver [aat2870] using legacy suspend method
[ 0.471288] i2c-core: driver [aat2870] using legacy resume method
[ 0.471288] SCSI subsystem initialized
[ 0.471697] libata version 3.00 loaded.
[ 0.471697] usbcore: registered new interface driver usbfs
[ 0.471697] usbcore: registered new interface driver hub
[ 0.471697] usbcore: registered new device driver usb
[ 0.471697] PCI: Using ACPI for IRQ routing
[ 0.473980] PCI: pci_cache_line_size set to 64 bytes
[ 0.474077] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.474079] reserve RAM buffer: 00000000bf9bf000 - 00000000bfffffff
[ 0.474083] reserve RAM buffer: 00000000bfc00000 - 00000000bfffffff
[ 0.474085] reserve RAM buffer: 000000011f000000 - 000000011fffffff
[ 0.474190] NetLabel: Initializing
[ 0.474192] NetLabel: domain hash size = 128
[ 0.474194] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.474206] NetLabel: unlabeled traffic allowed by default
[ 0.474312] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.474312] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.476049] Switching to clocksource hpet
[ 0.484845] AppArmor: AppArmor Filesystem Enabled
[ 0.484872] pnp: PnP ACPI init
[ 0.484891] ACPI: bus type pnp registered
[ 0.485041] pnp 00:00: [bus 00-ff]
[ 0.485044] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.485046] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.485049] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.485052] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.485054] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.485056] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.485059] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.485061] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.485064] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.485066] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.485068] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.485071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.485073] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.485075] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.485078] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.485080] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.485082] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[ 0.485085] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[ 0.485087] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.485153] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.485215] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.485217] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.485271] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.485274] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.485278] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.485538] pnp 00:02: [irq 0 disabled]
[ 0.485548] pnp 00:02: [irq 8]
[ 0.485550] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.485583] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.485654] pnp 00:03: [io 0x0000-0x000f]
[ 0.485657] pnp 00:03: [io 0x0081-0x008f]
[ 0.485659] pnp 00:03: [io 0x00c0-0x00df]
[ 0.485661] pnp 00:03: [dma 4]
[ 0.485700] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.485710] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.485761] pnp 00:04: [irq 13]
[ 0.485798] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.485892] pnp 00:05: [io 0x0070-0x0071]
[ 0.485932] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.485941] pnp 00:06: [io 0x0061]
[ 0.485980] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.485991] pnp 00:07: [io 0x0060]
[ 0.485993] pnp 00:07: [io 0x0064]
[ 0.486044] pnp 00:07: [irq 1]
[ 0.486083] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.486141] pnp 00:08: [irq 12]
[ 0.486180] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.486193] pnp 00:09: [io 0x0010-0x001f]
[ 0.486198] pnp 00:09: [io 0x002e-0x002f]
[ 0.486200] pnp 00:09: [io 0x0072-0x0073]
[ 0.486202] pnp 00:09: [io 0x0080]
[ 0.486203] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.486205] pnp 00:09: [io 0x0092]
[ 0.486207] pnp 00:09: [io 0x0400-0x04cf]
[ 0.486209] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.486211] pnp 00:09: [io 0x04d6]
[ 0.486213] pnp 00:09: [io 0x0680-0x06ff]
[ 0.486215] pnp 00:09: [io 0x077a]
[ 0.486217] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.486219] pnp 00:09: [io 0x0c14]
[ 0.486221] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.486223] pnp 00:09: [io 0x0c6c]
[ 0.486224] pnp 00:09: [io 0x0c6f]
[ 0.486226] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.486228] pnp 00:09: [io 0x0840-0x0847]
[ 0.486294] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.486297] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.486300] system 00:09: [io 0x04d6] has been reserved
[ 0.486303] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.486305] system 00:09: [io 0x077a] has been reserved
[ 0.486308] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.486311] system 00:09: [io 0x0c14] has been reserved
[ 0.486313] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.486316] system 00:09: [io 0x0c6c] has been reserved
[ 0.486318] system 00:09: [io 0x0c6f] has been reserved
[ 0.486321] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.486324] system 00:09: [io 0x0840-0x0847] has been reserved
[ 0.486327] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486385] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.486387] pnp 00:0a: [mem 0xffc00000-0xffffffff]
[ 0.486445] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.486449] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.486452] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.486847] pnp 00:0b: [io 0x0550-0x0557]
[ 0.486850] pnp 00:0b: IRQ 5 override to edge, high
[ 0.486856] pnp 00:0b: [irq 5]
[ 0.486903] pnp 00:0b: Plug and Play ACPI device, IDs AMDc003 (active)
[ 0.489230] pnp: PnP ACPI: found 12 devices
[ 0.489234] ACPI: ACPI bus type pnp unregistered
[ 0.497034] PCI: max bus depth: 1 pci_try_num: 2
[ 0.497066] pci 0000:00:06.0: BAR 15: assigned [mem 0xf0500000-0xf06fffff 64bit pref]
[ 0.497071] pci 0000:00:06.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.497075] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.497078] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
[ 0.497082] pci 0000:00:04.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.497088] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.497091] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
[ 0.497095] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.497099] pci 0000:00:06.0: bridge window [mem 0xf0500000-0xf06fffff 64bit pref]
[ 0.497103] pci 0000:00:07.0: PCI bridge to [bus 03-06]
[ 0.497106] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.497110] pci 0000:00:07.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.497113] pci 0000:00:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.497118] pci 0000:00:14.4: PCI bridge to [bus 07-07]
[ 0.497191] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.497196] pci 0000:00:04.0: setting latency timer to 64
[ 0.497205] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.497209] pci 0000:00:06.0: setting latency timer to 64
[ 0.497217] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.497221] pci 0000:00:07.0: setting latency timer to 64
[ 0.497229] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.497232] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.497235] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.497238] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.497240] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.497243] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.497245] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.497248] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.497250] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.497253] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.497256] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.497258] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.497261] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.497263] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.497266] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.497268] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.497271] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.497274] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.497276] pci_bus 0000:01: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.497279] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.497282] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.497284] pci_bus 0000:02: resource 2 [mem 0xf0500000-0xf06fffff 64bit pref]
[ 0.497287] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.497290] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.497292] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.497296] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.497298] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.497301] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.497303] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.497306] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.497308] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.497311] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.497313] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.497316] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.497318] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.497321] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.497323] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.497326] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.497329] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
[ 0.497331] pci_bus 0000:07: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.497334] pci_bus 0000:07: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.497336] pci_bus 0000:07: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.497375] NET: Registered protocol family 2
[ 0.497561] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.498917] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.501094] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.501349] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.501352] TCP reno registered
[ 0.501365] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.501393] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.501485] NET: Registered protocol family 1
[ 0.501501] pci 0000:00:01.0: Boot video device
[ 0.501566] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.501600] pci 0000:00:10.0: PCI INT A disabled
[ 0.501618] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.501655] pci 0000:00:10.1: PCI INT B disabled
[ 0.501666] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.501691] pci 0000:00:12.0: PCI INT A disabled
[ 0.501700] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.501725] pci 0000:00:12.2: PCI INT B disabled
[ 0.501732] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.501756] pci 0000:00:13.0: PCI INT A disabled
[ 0.501764] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.501789] pci 0000:00:13.2: PCI INT B disabled
[ 0.501805] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.501828] pci 0000:00:14.5: PCI INT C disabled
[ 0.501845] PCI: CLS 64 bytes, default 64
[ 0.501847] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.501850] Placing 64MB software IO TLB between ffff8800bb9bd000 - ffff8800bf9bd000
[ 0.501853] software IO TLB at phys 0xbb9bd000 - 0xbf9bd000
[ 0.501867] Simple Boot Flag at 0x44 set to 0x1
[ 0.502428] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.502432] [Firmware Bug]: cpu 0, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[ 0.502435] Failed to setup IBS, -22
[ 0.502774] audit: initializing netlink socket (disabled)
[ 0.502794] type=2000 audit(1340795889.500:1): initialized
[ 0.535150] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.554438] VFS: Disk quotas dquot_6.5.2
[ 0.554501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.555098] fuse init (API version 7.17)
[ 0.555240] msgmni has been set to 6822
[ 0.555739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.555821] io scheduler noop registered
[ 0.555824] io scheduler deadline registered
[ 0.555857] io scheduler cfq registered (default)
[ 0.555971] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.556078] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.556128] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.556157] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.556219] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.556247] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.556334] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 0.556337] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.556341] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 0.556355] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.556359] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.556373] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.556377] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.556394] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.556442] pciehp 0000:00:06.0:pcie04: HPC vendor_id 1022 device_id 1416 ss_vid 1022 ss_did 1234
[ 0.556462] pciehp 0000:00:06.0:pcie04: service driver pciehp loaded
[ 0.556470] pciehp 0000:00:07.0:pcie04: HPC vendor_id 1022 device_id 1417 ss_vid 1022 ss_did 1234
[ 0.556485] pciehp 0000:00:07.0:pcie04: service driver pciehp loaded
[ 0.556493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.590535] Freeing initrd memory: 13840k freed
[ 0.652409] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.656462] ACPI: AC Adapter [ACAD] (on-line)
[ 0.656553] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.656657] ACPI: Power Button [PWRB]
[ 0.656718] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.656794] ACPI: Lid Switch [LID]
[ 0.656833] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.656837] ACPI: Power Button [PWRF]
[ 0.657058] ACPI: acpi_idle registered with cpuidle
[ 0.668660] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.668673] ACPI: Battery Slot [BATT] (battery absent)
[ 0.668701] ERST: Table is not found!
[ 0.668703] GHES: HEST is not enabled!
[ 0.830692] ACPI: Battery Slot [BATT] (battery absent)
[ 0.892984] Linux agpgart interface v0.103
[ 0.895305] brd: module loaded
[ 0.896489] loop: module loaded
[ 0.896634] ahci 0000:00:11.0: version 3.0
[ 0.896691] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.896769] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 0.896833] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x9 impl SATA mode
[ 0.896838] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 0.897365] scsi0 : ahci
[ 0.897501] scsi1 : ahci
[ 0.897629] scsi2 : ahci
[ 0.897761] scsi3 : ahci
[ 0.898369] ata1: SATA max UDMA/133 abar m2048@0xf0452000 port 0xf0452100 irq 43
[ 0.898371] ata2: DUMMY
[ 0.898372] ata3: DUMMY
[ 0.898375] ata4: SATA max UDMA/133 abar m2048@0xf0452000 port 0xf0452280 irq 43
[ 0.898810] Fixed MDIO Bus: probed
[ 0.898831] tun: Universal TUN/TAP device driver, 1.6
[ 0.898833] tun: (C) 1999-2004 Max Krasnyansky
[ 0.898951] PPP generic driver version 2.4.2
[ 0.899106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.899121] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.899135] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.899189] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.899198] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.899224] QUIRK: Enable AMD PLL fix
[ 0.899234] ehci_hcd 0000:00:12.2: debug port 1
[ 0.899255] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0450000
[ 0.908144] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.908413] hub 1-0:1.0: USB hub found
[ 0.908418] hub 1-0:1.0: 5 ports detected
[ 0.908602] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.908627] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.908762] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.908770] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.908791] ehci_hcd 0000:00:13.2: debug port 1
[ 0.908805] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf044e000
[ 0.920141] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.920441] hub 2-0:1.0: USB hub found
[ 0.920446] hub 2-0:1.0: 5 ports detected
[ 0.920592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.920657] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.920683] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.920860] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.920888] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0451000
[ 0.980413] hub 3-0:1.0: USB hub found
[ 0.980468] hub 3-0:1.0: 5 ports detected
[ 0.980554] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.980579] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.980752] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.980769] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044f000
[ 1.040418] hub 4-0:1.0: USB hub found
[ 1.040473] hub 4-0:1.0: 5 ports detected
[ 1.040559] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.040584] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.040762] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.040779] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf044d000
[ 1.100421] hub 5-0:1.0: USB hub found
[ 1.100475] hub 5-0:1.0: 2 ports detected
[ 1.100555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.100643] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.100670] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 1.100674] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.100847] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.101039] xhci_hcd 0000:00:10.0: irq 18, io mem 0xf0448000
[ 1.101099] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.101104] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.101109] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 1.101113] xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
[ 1.101117] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
[ 1.101402] xHCI xhci_add_endpoint called for root hub
[ 1.101404] xHCI xhci_check_bandwidth called for root hub
[ 1.101431] hub 6-0:1.0: USB hub found
[ 1.101484] hub 6-0:1.0: 2 ports detected
[ 1.101546] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.101662] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 1.104690] xHCI xhci_add_endpoint called for root hub
[ 1.104692] xHCI xhci_check_bandwidth called for root hub
[ 1.104716] hub 7-0:1.0: USB hub found
[ 1.104769] hub 7-0:1.0: 2 ports detected
[ 1.172169] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.172210] xhci_hcd 0000:00:10.1: setting latency timer to 64
[ 1.172214] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.172402] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.172596] xhci_hcd 0000:00:10.1: irq 17, io mem 0xf044a000
[ 1.172658] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.172663] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.172667] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 1.172672] xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
[ 1.172676] xhci_hcd 0000:00:10.1: irq 53 for MSI/MSI-X
[ 1.172981] xHCI xhci_add_endpoint called for root hub
[ 1.172984] xHCI xhci_check_bandwidth called for root hub
[ 1.173012] hub 8-0:1.0: USB hub found
[ 1.173065] hub 8-0:1.0: 2 ports detected
[ 1.173132] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.173295] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[ 1.176171] xHCI xhci_add_endpoint called for root hub
[ 1.176173] xHCI xhci_check_bandwidth called for root hub
[ 1.176202] hub 9-0:1.0: USB hub found
[ 1.176229] hub 9-0:1.0: 2 ports detected
[ 1.216156] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.220158] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 1.236243] usbcore: registered new interface driver libusual
[ 1.236290] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.245040] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.245047] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.245252] mousedev: PS/2 mouse device common for all mice
[ 1.245456] rtc_cmos 00:05: RTC can wake from S4
[ 1.245563] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.245588] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.245674] device-mapper: uevent: version 1.0.3
[ 1.245797] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.245888] cpuidle: using governor ladder
[ 1.246060] cpuidle: using governor menu
[ 1.246063] EFI Variables Facility v0.08 2004-May-17
[ 1.246294] TCP cubic registered
[ 1.246383] NET: Registered protocol family 10
[ 1.246820] NET: Registered protocol family 17
[ 1.246841] Registering the dns_resolver key type
[ 1.247081] PM: Hibernation image not present or could not be loaded.
[ 1.247092] registered taskstats version 1
[ 1.258606] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.261784] Magic number: 0:466:328
[ 1.261968] rtc_cmos 00:05: setting system clock to 2012-06-27 11:18:11 UTC (1340795891)
[ 1.262000] powernow-k8: Found 1 AMD Eng Sample, ZM232263C4450_32/23/16_9900_654 (4 cpu cores) (version 2.20.00)
[ 1.262028] powernow-k8: Core Performance Boosting: on.
[ 1.262093] powernow-k8: 0 : pstate 0 (2300 MHz)
[ 1.262096] powernow-k8: 1 : pstate 1 (2000 MHz)
[ 1.262098] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 1.262099] powernow-k8: 3 : pstate 3 (1600 MHz)
[ 1.262101] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 1.262561] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.262563] EDD information not available.
[ 1.354702] hub 1-3:1.0: USB hub found
[ 1.355041] hub 1-3:1.0: 4 ports detected
[ 1.388158] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.390465] ata1.00: ATA-8: WDC WD2500BPVT-00ZEST0, 01.01A01, max UDMA/133
[ 1.390468] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.392048] ata1.00: configured for UDMA/133
[ 1.392276] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BPVT-0 01.0 PQ: 0 ANSI: 5
[ 1.392478] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.392495] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.392503] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.392655] sd 0:0:0:0: [sda] Write Protect is off
[ 1.392658] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.392705] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.463057] sda: sda1 sda2 < sda5 >
[ 1.463809] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.466460] Freeing unused kernel memory: 920k freed
[ 1.466648] Write protecting the kernel read-only data: 12288k
[ 1.474341] Freeing unused kernel memory: 1608k freed
[ 1.480358] Freeing unused kernel memory: 1196k freed
[ 1.500106] Refined TSC clocksource calibration: 2295.825 MHz.
[ 1.500112] Switching to clocksource tsc
[ 1.506886] udevd[102]: starting version 175
[ 1.629136] usb 1-3.3: new low-speed USB device number 3 using ehci_hcd
[ 1.796991] usb 1-3.4: new low-speed USB device number 4 using ehci_hcd
[ 1.867713] sdhci: Secure Digital Host Controller Interface driver
[ 1.867717] sdhci: Copyright(c) Pierre Ossman
[ 1.868091] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
[ 1.868141] sdhci-pci 0000:00:14.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.868202] mmc0: no vmmc regulator found
[ 1.868241] Registered led device: mmc0::
[ 1.869300] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 1.884171] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.884183] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.884290] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[ 1.884300] ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node ffff88011865cf28), AE_ALREADY_EXISTS (20110623/psparse-536)
[ 1.884351] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20110623/ac-118)
[ 1.891433] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input4
[ 1.891568] generic-usb 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.2-3.3/input0
[ 1.891589] usbcore: registered new interface driver usbhid
[ 1.891591] usbhid: USB HID core driver
[ 1.898077] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4:1.0/input/input5
[ 1.898206] generic-usb 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:12.2-3.4/input0
[ 1.903616] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4:1.1/input/input6
[ 1.903843] generic-usb 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:12.2-3.4/input1
[ 1.928171] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 1.936908] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.936912] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.016711] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 5.402106] EXT4-fs (sda1): recovery complete
[ 5.403100] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.395789] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.518961] udevd[425]: starting version 175
[ 9.747449] Adding 3645436k swap on /dev/sda5. Priority:-1 extents:1 across:3645436k
[ 10.715583] type=1400 audit(1340795900.949:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=563 comm="apparmor_parser"
[ 10.715642] type=1400 audit(1340795900.949:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=561 comm="apparmor_parser"
[ 10.715928] type=1400 audit(1340795900.949:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser"
[ 10.716021] type=1400 audit(1340795900.953:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561 comm="apparmor_parser"
[ 10.716146] type=1400 audit(1340795900.953:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
[ 10.716223] type=1400 audit(1340795900.953:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser"
[ 10.996279] lp: driver loaded but no devices found
[ 11.264584] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0f]
[ 11.264589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.419410] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
[ 11.511400] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 11.530808] acpi device:01: registered as cooling_device4
[ 11.530894] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 11.530957] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.603797] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 11.603801] Disabling lock debugging due to kernel taint
[ 11.627364] [fglrx] Maximum main memory to use for locked dma buffers: 3275 MBytes.
[ 11.627431] [fglrx] vendor: 1002 device: 9900 count: 1
[ 11.627887] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 11.627898] pci 0000:00:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.627903] pci 0000:00:01.0: setting latency timer to 64
[ 11.628342] [fglrx] Kernel PAT support is enabled
[ 11.628362] [fglrx] module loaded - fglrx 8.98.2 [May 22 2012] with 1 minors
[ 12.148371] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 12.148426] snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
[ 12.148450] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 12.770556] Too many HDMI devices
[ 12.770560] Too many HDMI devices
[ 12.770561] Too many HDMI devices
[ 12.770563] Too many HDMI devices
[ 12.770564] Too many HDMI devices
[ 12.770566] Too many HDMI devices
[ 12.770660] hda-codec: out of range cmd 0:0:2f90:707:0
[ 12.770663] hda-codec: out of range cmd 0:0:2f90:708:85
[ 12.770872] hda-codec: out of range cmd 0:0:2f90:f00:c
[ 12.770875] hda-codec: out of range cmd 0:0:2f90:709:0
[ 12.770877] hda-codec: out of range cmd 0:0:2f90:f09:0
[ 12.770912] hda-codec: out of range cmd 0:0:e0:f0d:0
[ 12.770915] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
[ 12.770936] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.770958] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 12.770982] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
[ 12.771011] HDMI status: Codec=0 Pin=12176 Presence_Detect=1 ELD_Valid=1
[ 12.771014] hda-codec: out of range cmd 0:0:2f90:f2e:8
[ 12.771017] hda_codec: cannot build controls for #0 (error -16)
[ 12.771020] hda_codec: cannot revert codec
[ 12.771384] snd_hda_intel 0000:00:01.1: PCI INT B disabled
[ 12.771393] snd_hda_intel: probe of 0000:00:01.1 failed with error -16
[ 12.771465] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.881721] input: HD-Audio Generic SPDIF as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 12.881936] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 12.882039] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 14.026933] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.387915] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 14.387918] vesafb: scrolling: redraw
[ 14.387921] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 14.389719] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005280000, using 8128k, total 8128k
[ 14.390218] Console: switching to colour frame buffer device 240x67
[ 14.390254] fb0: VESA VGA frame buffer device
[ 14.719645] init: failsafe main process (739) killed by TERM signal
[ 16.085790] ppdev: user-space parallel port driver
[ 16.887021] type=1400 audit(1340795907.121:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=810 comm="apparmor_parser"
[ 16.887393] type=1400 audit(1340795907.121:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=810 comm="apparmor_parser"
[ 17.552961] Bluetooth: Core ver 2.16
[ 17.552996] NET: Registered protocol family 31
[ 17.552999] Bluetooth: HCI device and connection manager initialized
[ 17.553002] Bluetooth: HCI socket layer initialized
[ 17.553005] Bluetooth: L2CAP socket layer initialized
[ 17.553012] Bluetooth: SCO socket layer initialized
[ 18.585764] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.585767] Bluetooth: BNEP filters: protocol multicast
[ 18.588110] Bluetooth: RFCOMM TTY layer initialized
[ 18.588117] Bluetooth: RFCOMM socket layer initialized
[ 18.588119] Bluetooth: RFCOMM ver 1.11
[ 19.235983] atl1c 0000:01:00.0: irq 54 for MSI/MSI-X
[ 19.236109] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up
[ 20.682089] type=1400 audit(1340795910.917:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=866 comm="apparmor_parser"
[ 20.682442] type=1400 audit(1340795910.917:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser"
[ 20.682643] type=1400 audit(1340795910.917:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=866 comm="apparmor_parser"
[ 20.685883] type=1400 audit(1340795910.921:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=870 comm="apparmor_parser"
[ 20.686238] type=1400 audit(1340795910.921:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=870 comm="apparmor_parser"
[ 20.751169] type=1400 audit(1340795910.985:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=865 comm="apparmor_parser"
[ 20.755893] type=1400 audit(1340795910.989:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=869 comm="apparmor_parser"
[ 20.756331] type=1400 audit(1340795910.993:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=869 comm="apparmor_parser"
[ 24.520125] [fglrx] ATIF platform detected with notification ID: 0x81
[ 25.689902] fglrx_pci 0000:00:01.0: irq 55 for MSI/MSI-X
[ 25.690863] [fglrx] Firegl kernel thread PID: 1215
[ 25.691101] [fglrx] Firegl kernel thread PID: 1216
[ 25.691268] [fglrx] Firegl kernel thread PID: 1217
[ 25.691371] [fglrx] IRQ 55 Enabled
[ 25.950789] [fglrx] Gart USWC size:1072 M.
[ 25.950793] [fglrx] Gart cacheable size:424 M.
[ 25.950798] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 25.950800] [fglrx] Reserved FB block: Unshared offset:fca5000, size:35b000
[ 25.950803] [fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
[ 30.256149] eth0: no IPv6 routers present
[ 107.955794] audit_printk_skb: 27 callbacks suppressed
[ 107.955802] type=1400 audit(1340795998.187:27): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1873 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 299.816155] [Hardware Error]: Machine check events logged
[ 1274.642064] type=1701 audit(1340797164.875:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10278 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7ff49395f58d code=0x50002
[ 1274.642088] type=1701 audit(1340797164.875:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10278 comm="chrome" reason="seccomp" sig=0 syscall=91 compat=0 ip=0x7ff4915a4da7 code=0x30000
[ 1274.642111] chrome[10278]: segfault at b6ff05b ip 00007ff498b12036 sp 00007fff6d673d70 error 6 in chrome[7ff497738000+4422000]
[ 3611.484019] atl1c 0000:01:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.