dmesg - zip
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-25-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 22:11:24 UTC 2012 (Ubuntu 3.2.0-25.40-generic-pae 3.2.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ddff800 (usable)
BIOS-e820: 000000007ddff800 - 000000007de53c00 (ACPI NVS)
BIOS-e820: 000000007de53c00 - 000000007de55c00 (ACPI data)
BIOS-e820: 000000007de55c00 - 000000007e000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7ddff max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 000000000 write-back
1 base 07DF00000 mask FFFF00000 uncachable
2 base 080000000 mask F80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 2015MB, range: 1MB, type UC
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 63487M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2015MB, range: 1MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 32GB, type WB
e820 update range: 000000007df00000 - 000000007e000000 (usable) ==> (reserved)
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
found SMP MP-table at [c00fe710] fe710
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 36500000 - 37278000
ACPI: RSDP 000fec00 00024 (v02 DELL )
ACPI: XSDT 000fc5bd 0008C (v01 DELL B9K 00000015 ASL 00000061)
ACPI: FACP 000fc6ed 000F4 (v03 DELL B9K 00000015 ASL 00000061)
ACPI: DSDT fff78ba8 045A0 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 7ddff800 00040
ACPI: SSDT fff7d148 00098 (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 000fc7e1 00092 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: BOOT 000fc873 00028 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: ASF! 000fc89b 00096 (v32 DELL B9K 00000015 ASL 00000061)
ACPI: MCFG 000fc931 0003E (v01 DELL B9K 00000015 ASL 00000061)
ACPI: HPET 000fc96f 00038 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: TCPA 000fcbcb 00032 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: ____ 000fcbfd 00030 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: SLIC 000fc9a7 00176 (v01 DELL B9K 00000015 ASL 00000061)
ACPI: SSDT 7ddff840 001B7 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 7ddffc49 001B7 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 7de00052 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1122MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x0007ddff
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0007ddff
On node 0 totalpages: 515469
free_area_init_node: node 0, pgdat c186d440, node_mem_map f5540200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2245 pages used for memmap
HighMem zone: 284988 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7e000000 (gap: 7e000000:62000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b81000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511440
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8249072 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007ddff)
Memory: 2012216k/2062332k available (5828k kernel code, 49660k reserved, 2854k data, 740k init, 1148932k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc187b000 - 0xc1934000 ( 740 kB)
.data : 0xc15b1264 - 0xc187ad00 (2854 kB)
.text : 0xc1000000 - 0xc15b1264 (5828 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f500a000 soft=f500c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.633 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.26 BogoMIPS (lpj=8778532)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26619 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f513a000 soft=f513c000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8778.23 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 7ddff800 (345088 bytes)
print_constraints: dummy:
RTC time: 11:52:35, date: 06/16/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x87 (20110623/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfec00000]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfedad800-0xfedadfff]
pci 0000:00:00.0: [8086:29b0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29b1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: [8086:29b4] type 0 class 0x000780
pci 0000:00:03.0: reg 10: [mem 0xfedad000-0xfedad00f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: [8086:29b6] type 0 class 0x000101
pci 0000:00:03.2: reg 10: [io 0xfe80-0xfe87]
pci 0000:00:03.2: reg 14: [io 0xfe90-0xfe93]
pci 0000:00:03.2: reg 18: [io 0xfea0-0xfea7]
pci 0000:00:03.2: reg 1c: [io 0xfeb0-0xfeb3]
pci 0000:00:03.2: reg 20: [io 0xfef0-0xfeff]
pci 0000:00:03.3: [8086:29b7] type 0 class 0x000700
pci 0000:00:03.3: reg 10: [io 0xec98-0xec9f]
pci 0000:00:03.3: reg 14: [mem 0xfebda000-0xfebdafff]
pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfebe0000-0xfebfffff]
pci 0000:00:19.0: reg 14: [mem 0xfebdb000-0xfebdbfff]
pci 0000:00:19.0: reg 18: [io 0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xff20-0xff3f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfebd9c00-0xfebd9fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfebdc000-0xfebdffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2914] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfedf]
pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9707ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfebd9b00-0xfebd9bff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
pci 0000:01:00.0: [1002:94c1] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xdc00-0xdcff]
pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfedad800-0xfedadfff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
Freeing initrd memory: 13792k freed
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:03.0: no compatible bridge window for [mem 0xfedad000-0xfedad00f 64bit]
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007ddff800 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xf0000000-0xfec00000 window]
pnp 00:00: [mem 0x80000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xefffffff window disabled]
pnp 00:00: [mem 0xff980800-0xff980bff window]
pnp 00:00: [mem 0xff97c000-0xff97ffff window]
pnp 00:00: [mem 0xfed20000-0xfed9ffff window]
pnp 00:00: [mem 0xfedad800-0xfedadfff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x0800-0x085f]
pnp 00:01: [io 0x0c00-0x0c7f]
pnp 00:01: [io 0x0860-0x08ff]
system 00:01: [io 0x0800-0x085f] has been reserved
system 00:01: [io 0x0c00-0x0c7f] has been reserved
system 00:01: [io 0x0860-0x08ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0080-0x009f]
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x0070-0x007f]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077f]
pnp 00:09: [irq 7]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0000000-0xf00007ff]
pci 0000:00:1f.2: BAR 5: set to [mem 0xf0000000-0xf00007ff] (PCI address [0xf0000000-0xf00007ff])
pci 0000:00:03.0: BAR 0: assigned [mem 0xf0000800-0xf000080f 64bit]
pci 0000:00:03.0: BAR 0: set to [mem 0xf0000800-0xf000080f 64bit] (PCI address [0xf0000800-0xf000080f])
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0100000-0xf02fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf02fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 14 [mem 0xfedad800-0xfedadfff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf02fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:03: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:03: resource 11 [mem 0xff980800-0xff980bff]
pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:03: resource 14 [mem 0xfedad800-0xfedadfff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1339847557.040:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1713
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
isapnp: No Plug & Play device found
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS4 at I/O 0xec98 (irq = 17) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf0000000 port 0xf0000380 irq 42
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_generic 0000:00:03.2: setting latency timer to 64
scsi6 : ata_generic
scsi7 : ata_generic
ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebd9c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 0:706:883
rtc_cmos 00:05: setting system clock to 2012-06-16 11:52:38 UTC (1339847558)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Refined TSC clocksource calibration: 2194.486 MHz.
Switching to clocksource tsc
ata6: SATA link down (SStatus 4 SControl 300)
usb 1-3: new high-speed USB device number 2 using ehci_hcd
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133
ata1.00: 312500000 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-T10N, A100, max UDMA/33
ata2.00: applying bridge limits
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCCT10N A100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 740k freed
Write protecting the kernel text: 5832k
Write protecting the kernel read-only data: 2380k
NX-protecting the kernel data: 4408k
udevd[104]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi 8:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:c9:61:1b:0a
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1041FF-0FF
sdb: sdb1 sdb2
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[314]: starting version 175
lp: driver loaded but no devices found
Adding 2060284k swap on /dev/sda5. Priority:-1 extents:1 across:2060284k
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:03.0: setting latency timer to 64
mei 0000:00:03.0: irq 44 for MSI/MSI-X
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[fglrx] Maximum main memory to use for locked dma buffers: 1854 MBytes.
[fglrx] vendor: 1002 device: 94c1 count: 1
[fglrx] ioport: bar 4, base 0xdc00, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
type=1400 audit(1339847571.273:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=446 comm="apparmor_parser"
type=1400 audit(1339847571.273:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=446 comm="apparmor_parser"
type=1400 audit(1339847571.273:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=446 comm="apparmor_parser"
lp0: using parport0 (interrupt-driven).
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ppdev: user-space parallel port driver
init: failsafe main process (634) killed by TERM signal
type=1400 audit(1339847571.965:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=706 comm="apparmor_parser"
type=1400 audit(1339847571.969:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=705 comm="apparmor_parser"
type=1400 audit(1339847571.969:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
type=1400 audit(1339847571.969:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
type=1400 audit(1339847571.981:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=712 comm="apparmor_parser"
type=1400 audit(1339847571.985:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=708 comm="apparmor_parser"
type=1400 audit(1339847571.985:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=712 comm="apparmor_parser"
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8c00000, using 3072k, total 3072k
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1062
[fglrx] Firegl kernel thread PID: 1063
[fglrx] Firegl kernel thread PID: 1064
[fglrx] IRQ 46 Enabled
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Gart USWC size:620 M.
[fglrx] Gart cacheable size:243 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe09000, size:1f3000
[fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
eth0: no IPv6 routers present
audit_printk_skb: 36 callbacks suppressed
type=1400 audit(1339861762.445:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2645 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb 1-3: USB disconnect, device number 2
[fglrx] IRQ 46 Disabled
fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 19364
[fglrx] Firegl kernel thread PID: 19365
[fglrx] Firegl kernel thread PID: 19366
[fglrx] IRQ 46 Enabled
[fglrx] Gart USWC size:620 M.
[fglrx] Gart cacheable size:243 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe09000, size:1f3000
[fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
type=1400 audit(1339979453.799:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=20107 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
usb 1-4: new high-speed USB device number 3 using ehci_hcd
scsi9 : usb-storage 1-4:1.0
scsi 9:0:0:0: Direct-Access CENTON DS Sport 0.00 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 9:0:0:0: [sdb] Asking for cache data failed
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 3
usb 1-4: new high-speed USB device number 4 using ehci_hcd
scsi10 : usb-storage 1-4:1.0
scsi 10:0:0:0: Direct-Access CENTON DS Sport 0.00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 10:0:0:0: [sdb] Asking for cache data failed
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Asking for cache data failed
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 10:0:0:0: [sdb] Asking for cache data failed
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 4
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-4: new high-speed USB device number 5 using ehci_hcd
scsi11 : usb-storage 1-4:1.0
scsi 11:0:0:0: Direct-Access CENTON DS Sport 0.00 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 11:0:0:0: [sdb] Asking for cache data failed
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Asking for cache data failed
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 11:0:0:0: [sdb] Asking for cache data failed
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 5
usb 1-4: new high-speed USB device number 6 using ehci_hcd
scsi12 : usb-storage 1-4:1.0
scsi 12:0:0:0: Direct-Access CENTON DS Sport 0.00 PQ: 0 ANSI: 2
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:0: [sdb] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 12:0:0:0: [sdb] Write Protect is off
sd 12:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 12:0:0:0: [sdb] Asking for cache data failed
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] Asking for cache data failed
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 12:0:0:0: [sdb] Asking for cache data failed
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 6
usb 1-4: new high-speed USB device number 7 using ehci_hcd
scsi13 : usb-storage 1-4:1.0
scsi 13:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg2 type 0
sd 13:0:0:0: [sdb] 8069120 512-byte logical blocks: (4.13 GB/3.84 GiB)
sd 13:0:0:0: [sdb] Write Protect is off
sd 13:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 13:0:0:0: [sdb] No Caching mode page present
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sd 13:0:0:0: [sdb] No Caching mode page present
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 13:0:0:0: [sdb] No Caching mode page present
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4: USB disconnect, device number 7
usb 1-4: new high-speed USB device number 8 using ehci_hcd
scsi14 : usb-storage 1-4:1.0
scsi 14:0:0:0: Direct-Access CENTON DS Sport 0.00 PQ: 0 ANSI: 2
sd 14:0:0:0: Attached scsi generic sg2 type 0
sd 14:0:0:0: [sdb] 3947016 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 14:0:0:0: [sdb] Write Protect is off
sd 14:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 14:0:0:0: [sdb] Asking for cache data failed
sd 14:0:0:0: [sdb] Assuming drive cache: write through
sd 14:0:0:0: [sdb] Asking for cache data failed
sd 14:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 14:0:0:0: [sdb] Asking for cache data failed
sd 14:0:0:0: [sdb] Assuming drive cache: write through
sd 14:0:0:0: [sdb] Attached SCSI removable disk