dmesg - 2ndhandOD
evice:00/PNP0C0C:00/input/input0
[ 0.436201] ACPI: Power Button [PWRB]
[ 0.436269] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.436273] ACPI: Power Button [PWRF]
[ 0.436334] ACPI: Fan [FAN] (on)
[ 0.439114] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.439118] ACPI: Thermal Zone [THRM] (40 C)
[ 0.439196] ERST: Table is not found!
[ 0.439198] GHES: HEST is not enabled!
[ 0.439486] isapnp: Scanning for PnP cards...
[ 0.535461] Freeing initrd memory: 13796k freed
[ 0.792487] isapnp: No Plug & Play device found
[ 0.848506] Linux agpgart interface v0.103
[ 0.850471] brd: module loaded
[ 0.851455] loop: module loaded
[ 0.851737] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 0.851917] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.851933] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 0.851951] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 0.851960] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 0.852129] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.852139] pata_acpi 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 0.852156] pata_acpi 0000:00:0e.1: setting latency timer to 64
[ 0.852165] pata_acpi 0000:00:0e.1: PCI INT B disabled
[ 0.852318] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 0.852322] pata_acpi 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
[ 0.852339] pata_acpi 0000:00:0e.2: setting latency timer to 64
[ 0.852348] pata_acpi 0000:00:0e.2: PCI INT C disabled
[ 0.852759] Fixed MDIO Bus: probed
[ 0.852782] tun: Universal TUN/TAP device driver, 1.6
[ 0.852784] tun: (C) 1999-2004 Max Krasnyansky
[ 0.852847] PPP generic driver version 2.4.2
[ 0.852972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.852991] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.853003] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.853006] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.853064] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.853086] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.853094] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
[ 0.853114] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xefffe000
[ 0.864021] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.864186] hub 1-0:1.0: USB hub found
[ 0.864191] hub 1-0:1.0: 10 ports detected
[ 0.864296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.864314] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.864324] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.864327] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.864384] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.864410] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xeffff000
[ 0.922145] hub 2-0:1.0: USB hub found
[ 0.922151] hub 2-0:1.0: 10 ports detected
[ 0.922252] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.922317] usbcore: registered new interface driver libusual
[ 0.922374] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.922784] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.922791] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.922954] mousedev: PS/2 mouse device common for all mice
[ 0.923147] rtc_cmos 00:05: RTC can wake from S4
[ 0.923280] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.923311] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.923372] device-mapper: uevent: version 1.0.3
[ 0.923467] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.923509] EISA: Probing bus 0 at eisa.0
[ 0.923511] EISA: Cannot allocate resource for mainboard
[ 0.923513] Cannot allocate resource for EISA slot 1
[ 0.923515] Cannot allocate resource for EISA slot 2
[ 0.923517] Cannot allocate resource for EISA slot 3
[ 0.923519] Cannot allocate resource for EISA slot 4
[ 0.923521] Cannot allocate resource for EISA slot 5
[ 0.923524] Cannot allocate resource for EISA slot 6
[ 0.923526] Cannot allocate resource for EISA slot 7
[ 0.923528] Cannot allocate resource for EISA slot 8
[ 0.923529] EISA: Detected 0 cards.
[ 0.923541] cpufreq-nforce2: No nForce2 chipset.
[ 0.923543] cpuidle: using governor ladder
[ 0.923545] cpuidle: using governor menu
[ 0.923547] EFI Variables Facility v0.08 2004-May-17
[ 0.923838] TCP cubic registered
[ 0.923973] NET: Registered protocol family 10
[ 0.924623] NET: Registered protocol family 17
[ 0.924639] Registering the dns_resolver key type
[ 0.924658] Using IPI No-Shortcut mode
[ 0.924797] PM: Hibernation image not present or could not be loaded.
[ 0.924810] registered taskstats version 1
[ 0.942157] Magic number: 0:436:43
[ 0.942240] rtc_cmos 00:05: setting system clock to 2012-06-18 20:00:09 UTC (1340049609)
[ 0.942262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.942264] EDD information not available.
[ 0.942440] Freeing unused kernel memory: 740k freed
[ 0.942720] Write protecting the kernel text: 5832k
[ 0.942741] Write protecting the kernel read-only data: 2380k
[ 0.942742] NX-protecting the kernel data: 4408k
[ 0.960433] udevd[85]: starting version 175
[ 1.054463] Floppy drive(s): fd0 is 1.44M
[ 1.065904] sata_nv 0000:00:0e.0: version 3.5
[ 1.065921] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 1.065924] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.066383] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.072171] FDC 0 is a post-1991 82077
[ 1.077923] scsi0 : sata_nv
[ 1.080149] scsi1 : sata_nv
[ 1.080366] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 21
[ 1.080370] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 21
[ 1.080407] sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 1.080412] sata_nv 0000:00:0e.1: Using SWNCQ mode
[ 1.080921] sata_nv 0000:00:0e.1: setting latency timer to 64
[ 1.085188] scsi2 : sata_nv
[ 1.088155] scsi3 : sata_nv
[ 1.088323] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 20
[ 1.088326] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 20
[ 1.088379] sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
[ 1.088382] sata_nv 0000:00:0e.2: Using SWNCQ mode
[ 1.088850] sata_nv 0000:00:0e.2: setting latency timer to 64
[ 1.089592] scsi4 : sata_nv
[ 1.092207] scsi5 : sata_nv
[ 1.092382] ata5: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 23
[ 1.092386] ata6: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 23
[ 1.092428] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.092468] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.094609] scsi6 : pata_amd
[ 1.094706] scsi7 : pata_amd
[ 1.095174] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.095177] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.095231] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.095400] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 1.095405] forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 1.095411] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.176027] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 1.315624] usbcore: registered new interface driver uas
[ 1.317154] Initializing USB Mass Storage driver...
[ 1.317328] scsi8 : usb-storage 1-2:1.0
[ 1.317413] usbcore: registered new interface driver usb-storage
[ 1.317415] USB Mass Storage support registered.
[ 1.372022] Refined TSC clocksource calibration: 2133.313 MHz.
[ 1.372028] Switching to clocksource tsc
[ 1.400013] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.404012] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.424012] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.548022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556471] ata1.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
[ 1.556475] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.556800] hub 1-3:1.0: USB hub found
[ 1.556883] hub 1-3:1.0: 7 ports detected
[ 1.564440] ata1.00: configured for UDMA/133
[ 1.564574] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[ 1.564746] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.564760] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.564804] sd 0:0:0:0: [sda] Write Protect is off
[ 1.564807] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.564831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.616770] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:d6:0e:dd
[ 1.616774] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.616973] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[ 1.616978] forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
[ 1.616983] forcedeth 0000:00:12.0: setting latency timer to 64
[ 1.622307] sda: sda1 sda2 < sda5 sda6 >
[ 1.622748] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.876012] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.916015] usb 2-4: new low-speed USB device number 2 using ohci_hcd
[ 2.140824] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:d6:0e:de
[ 2.140829] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.143502] input: Gyration GyroPoint RF Technology Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input2
[ 2.143607] generic-usb 0003:0C16:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:0b.0-4/input0
[ 2.153127] input: Gyration GyroPoint RF Technology Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.1/input/input3
[ 2.153310] generic-usb 0003:0C16:0001.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [Gyration GyroPoint RF Technology Receiver] on usb-0000:00:0b.0-4/input1
[ 2.153415] usbcore: registered new interface driver usbhid
[ 2.153417] usbhid: USB HID core driver
[ 2.188014] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.220265] usb 1-3.2: new high-speed USB device number 5 using ehci_hcd
[ 2.318412] scsi 8:0:0:0: Direct-Access Seagate FA GoFlex Desk 0D12 PQ: 0 ANSI: 0
[ 2.318947] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 2.319521] sd 8:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.320518] sd 8:0:0:0: [sdb] Write Protect is off
[ 2.320521] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2.322269] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2.322271] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2.327268] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2.327271] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2.328589] sdb: sdb1
[ 2.328684] hub 1-3.2:1.0: USB hub found
[ 2.328812] hub 1-3.2:1.0: 4 ports detected
[ 2.334268] sd 8:0:0:0: [sdb] No Caching mode page present
[ 2.334271] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2.334274] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 2.416263] usb 1-3.6: new full-speed USB device number 6 using ehci_hcd
[ 2.531132] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.6/1-3.6:1.0/input/input4
[ 2.531271] generic-usb 0003:046D:C526.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.1-3.6/input0
[ 2.534119] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.6/1-3.6:1.1/input/input5
[ 2.534289] generic-usb 0003:046D:C526.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.1-3.6/input1
[ 2.656029] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.664143] ata6.00: ATAPI: TSSTcorp CDDVDW TS-H653N, UO00, max UDMA/100
[ 2.680140] ata6.00: configured for UDMA/100
[ 2.681232] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N UO00 PQ: 0 ANSI: 5
[ 2.683724] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.683727] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.683861] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.683989] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 2.684103] ata8: port disabled--ignoring
[ 2.685405] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 2.685418] firewire_ohci 0000:02:06.2: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 2.740060] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.740268] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 2.740281] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2.804057] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 3.082281] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.082285] EXT4-fs (sda5): write access will be enabled during recovery
[ 3.240259] firewire_core: created device fw0: GUID 00023c00c1003689, S400
[ 3.240272] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 3.304083] firewire_core: created device fw1: GUID 0011d80000fe7196, S400
[ 7.010726] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 7.010737] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622310
[ 7.010886] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622309
[ 7.010909] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622308
[ 7.010921] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622306
[ 7.010942] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622289
[ 7.010964] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622285
[ 7.011014] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622282
[ 7.011036] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622281
[ 7.011117] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622149
[ 7.011146] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622117
[ 7.011679] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622115
[ 7.011698] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621900
[ 7.011875] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621910
[ 7.011892] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2624277
[ 7.011910] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622106
[ 7.011920] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623353
[ 7.011986] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621685
[ 7.054944] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844561
[ 7.054963] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844567
[ 7.054979] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2626875
[ 7.054996] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844566
[ 7.055012] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844551
[ 7.073220] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844505
[ 7.073241] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844565
[ 7.073257] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844563
[ 7.073275] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844562
[ 7.073291] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844508
[ 7.073306] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844560
[ 7.073322] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844526
[ 7.073339] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844506
[ 7.086930] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1842949
[ 7.086974] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1842948
[ 7.086992] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844525
[ 7.098673] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1841481
[ 7.098694] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844514
[ 7.098711] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844501
[ 7.098727] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844513
[ 7.098742] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844510
[ 7.098758] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844512
[ 7.098773] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844509
[ 7.098789] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844507
[ 7.108941] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1839336
[ 7.108964] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844504
[ 7.108981] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1839315
[ 7.108998] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1839292
[ 7.109067] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621545
[ 7.114829] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1835671
[ 7.120138] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1835322
[ 7.120159] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623309
[ 7.120180] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1841450
[ 7.138629] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623295
[ 7.142103] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1844136
[ 7.145515] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1843324
[ 7.162626] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623268
[ 7.162649] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623241
[ 7.162666] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623235
[ 7.162685] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623066
[ 7.162702] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2623057
[ 7.162718] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622287
[ 7.162733] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2622277
[ 7.162749] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621929
[ 7.162765] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621827
[ 7.162781] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2621686
[ 7.185513] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 6556172
[ 7.204140] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837700
[ 7.204161] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837603
[ 7.204181] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837689
[ 7.204198] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837679
[ 7.204215] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1837606
[ 7.204231] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1835828
[ 7.207674] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 6556721
[ 7.207695] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1843371
[ 7.207714] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1843370
[ 7.207731] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 6556603
[ 7.207746] EXT4-fs (sda5): 74 orphan inodes deleted
[ 7.207749] EXT4-fs (sda5): recovery complete
[ 7.657094] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.694343] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.694351] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.715384] udevd[391]: starting version 175
[ 17.777467] lp: driver loaded but no devices found
[ 17.784616] Adding 8386556k swap on /dev/sda6. Priority:-1 extents:1 across:8386556k
[ 17.863602] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 17.863608] ACPI: resource nForce2_smbus [io 0x1c80-0x1cbf] conflicts with ACPI region SM00 [io 0x1c80-0x1c85]
[ 17.863610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.863873] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 17.863973] NV_TCO: Watchdog reboot detected.
[ 17.890733] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 17.911630] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 18.115283] gameport gameport0: EMU10K1 is pci0000:02:06.1/gameport0, io 0xc800, speed 745kHz
[ 18.126089] type=1400 audit(1340064026.679:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=695 comm="apparmor_parser"
[ 18.127401] type=1400 audit(1340064026.679:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=698 comm="apparmor_parser"
[ 18.127994] type=1400 audit(1340064026.679:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=695 comm="apparmor_parser"
[ 18.128361] type=1400 audit(1340064026.683:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=695 comm="apparmor_parser"
[ 18.129167] type=1400 audit(1340064026.683:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=698 comm="apparmor_parser"
[ 18.129423] type=1400 audit(1340064026.683:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=698 comm="apparmor_parser"
[ 18.130470] cfg80211: Calling CRDA to update world regulatory domain
[ 18.172026] ppdev: user-space parallel port driver
[ 18.184360] Bluetooth: Core ver 2.16
[ 18.184388] NET: Registered protocol family 31
[ 18.184390] Bluetooth: HCI device and connection manager initialized
[ 18.184393] Bluetooth: HCI socket layer initialized
[ 18.184395] Bluetooth: L2CAP socket layer initialized
[ 18.191978] Bluetooth: SCO socket layer initialized
[ 18.197554] type=1400 audit(1340064026.751:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=750 comm="apparmor_parser"
[ 18.198687] type=1400 audit(1340064026.751:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=750 comm="apparmor_parser"
[ 18.205552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.205556] Bluetooth: BNEP filters: protocol multicast
[ 18.226798] Bluetooth: RFCOMM TTY layer initialized
[ 18.226806] Bluetooth: RFCOMM socket layer initialized
[ 18.226808] Bluetooth: RFCOMM ver 1.11
[ 18.254880] nvidia: module license 'NVIDIA' taints kernel.
[ 18.254884] Disabling lock debugging due to kernel taint
[ 18.260006] rt61pci 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 18.278423] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278429] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278433] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278437] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278440] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278447] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278451] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278454] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278458] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278461] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278465] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278468] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278472] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278477] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278481] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278484] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278488] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278491] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278495] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278498] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278502] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 18.278505] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278509] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 18.278512] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278516] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 18.278519] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 18.278523] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 18.305639] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.306916] Registered led device: rt61pci-phy0::radio
[ 18.306965] Registered led device: rt61pci-phy0::assoc
[ 18.428668] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 18.428675] snd_hda_intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 18.428678] hda_intel: msi for device 1043:81f2 set to 0
[ 18.428702] snd_hda_intel 0000:00:0f.1: setting latency timer to 64
[ 18.440106] init: failsafe main process (850) killed by TERM signal
[ 18.540620] type=1400 audit(1340064027.095:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
[ 18.544649] type=1400 audit(1340064027.099:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
[ 18.642289] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 18.642307] snd_emu10k1 0000:02:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 18.645960] Installing spdif_bug patch: SB Audigy 2 Platinum EX [SB0280]
[ 19.002873] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 19.002880] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 19.002889] nvidia 0000:01:00.0: setting latency timer to 64
[ 19.002894] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.003176] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 19.051398] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051404] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051408] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051412] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051415] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051419] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051422] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051429] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051436] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051440] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051444] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051447] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051451] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051454] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051458] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051462] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051465] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051469] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051472] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051476] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051479] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051483] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.051486] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051490] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.051493] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 19.051497] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.051501] cfg80211: World regulatory domain updated:
[ 19.051504] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.051508] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051512] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.051515] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.051519] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.051522] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.260248] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.260656] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.267361] forcedeth 0000:00:11.0: eth0: no link during initialization
[ 19.267964] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.271573] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.288000] forcedeth 0000:00:12.0: eth1: no link during initialization
[ 19.289400] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.292189] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.307759] vboxdrv: Found 2 processor cores.
[ 19.309456] vboxdrv: fAsync=0 offMin=0x4e8 offMax=0xf80
[ 19.309600] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 19.309603] vboxdrv: Successfully loaded version 4.1.12 (interface 0x00190000).
[ 19.521266] vboxpci: IOMMU not found (not registered)
[ 19.540623] hda_codec: AD1988B: BIOS auto-probing.
[ 22.520039] wlan0: authenticate with 00:1c:10:45:73:6c (try 1)
[ 22.521450] wlan0: authenticated
[ 22.536035] wlan0: associate with 00:1c:10:45:73:6c (try 1)
[ 22.538363] wlan0: RX AssocResp from 00:1c:10:45:73:6c (capab=0x411 status=0 aid=2)
[ 22.538366] wlan0: associated
[ 22.538806] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.056017] wlan0: no IPv6 routers present
[ 299.988011] [Hardware Error]: Machine check events logged
[ 309.631754] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8881)
[ 309.632242] CPU0: Core temperature/speed normal
[ 449.988014] [Hardware Error]: Machine check events logged
[ 611.022337] CPU0: Core temperature above threshold, cpu clock throttled (total events = 19965)
[ 611.022830] CPU0: Core temperature/speed normal
[ 674.988018] [Hardware Error]: Machine check events logged
[ 911.038285] CPU0: Core temperature above threshold, cpu clock throttled (total events = 48738)
[ 911.038772] CPU0: Core temperature/speed normal
[ 1199.988014] [Hardware Error]: Machine check events logged
[ 1211.052596] CPU0: Core temperature above threshold, cpu clock throttled (total events = 99081)
[ 1211.053085] CPU0: Core temperature/speed normal
[ 1349.988017] [Hardware Error]: Machine check events logged
[ 1511.071035] CPU0: Core temperature above threshold, cpu clock throttled (total events = 151202)
[ 1511.071522] CPU0: Core temperature/speed normal
[ 1574.988029] [Hardware Error]: Machine check events logged
[ 1700.036003] ata6: drained 65536 bytes to clear DRQ
[ 1700.059873] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 1700.059878] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 1700.059883] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 1700.059898] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 1700.059900] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1700.059903] ata6.00: status: { DRDY }
[ 1700.059908] ata6: hard resetting link
[ 1700.059910] ata6: nv: skipping hardreset on occupied port
[ 1700.524115] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1700.548147] ata6.00: configured for UDMA/100
[ 1700.548574] ata6: EH complete
[ 1811.074398] CPU0: Core temperature above threshold, cpu clock throttled (total events = 178827)
[ 1811.074885] CPU0: Core temperature/speed normal
[ 1944.036019] ata6: drained 65536 bytes to clear DRQ
[ 1944.060404] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 1944.060409] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 1944.060415] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 1944.060431] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 1944.060434] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1944.060443] ata6.00: status: { DRDY }
[ 1944.060451] ata6: hard resetting link
[ 1944.060456] ata6: nv: skipping hardreset on occupied port
[ 1944.528039] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1944.552157] ata6.00: configured for UDMA/100
[ 1944.552593] ata6: EH complete
[ 2057.060025] ata6: drained 65536 bytes to clear DRQ
[ 2057.090047] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2057.090052] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2057.090057] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2057.090071] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2057.090072] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2057.090076] ata6.00: status: { DRDY }
[ 2057.090081] ata6: hard resetting link
[ 2057.090083] ata6: nv: skipping hardreset on occupied port
[ 2057.556197] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2057.580176] ata6.00: configured for UDMA/100
[ 2057.580740] ata6: EH complete
[ 2099.988030] [Hardware Error]: Machine check events logged
[ 2109.028005] ata6: drained 65536 bytes to clear DRQ
[ 2109.051964] ata6: limiting SATA link speed to 1.5 Gbps
[ 2109.051969] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 2109.051974] ata6: SError: { LinkSeq TrStaTrns }
[ 2109.051979] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2109.051994] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2109.051995] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2109.051998] ata6.00: status: { DRDY }
[ 2109.052011] ata6: hard resetting link
[ 2109.052013] ata6: nv: skipping hardreset on occupied port
[ 2109.520045] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2109.544165] ata6.00: configured for UDMA/100
[ 2109.544597] ata6: EH complete
[ 2111.079310] CPU0: Core temperature above threshold, cpu clock throttled (total events = 210278)
[ 2111.079795] CPU0: Core temperature/speed normal
[ 2198.052023] ata6: drained 65536 bytes to clear DRQ
[ 2198.076266] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2198.076271] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2198.076275] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2198.076290] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2198.076291] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2198.076294] ata6.00: status: { DRDY }
[ 2198.076299] ata6: hard resetting link
[ 2198.076301] ata6: nv: skipping hardreset on occupied port
[ 2198.544035] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2198.568147] ata6.00: configured for UDMA/100
[ 2198.568573] ata6: EH complete
[ 2249.988030] [Hardware Error]: Machine check events logged
[ 2295.025900] ata6: drained 65536 bytes to clear DRQ
[ 2295.036509] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2295.036514] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2295.036519] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2295.036534] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2295.036535] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2295.036538] ata6.00: status: { DRDY }
[ 2295.036544] ata6: hard resetting link
[ 2295.036546] ata6: nv: skipping hardreset on occupied port
[ 2295.504054] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2295.528186] ata6.00: configured for UDMA/100
[ 2295.528613] ata6: EH complete
[ 2388.068003] ata6: drained 65536 bytes to clear DRQ
[ 2388.092186] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2388.092191] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2388.092196] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2388.092210] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2388.092212] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2388.092215] ata6.00: status: { DRDY }
[ 2388.092220] ata6: hard resetting link
[ 2388.092222] ata6: nv: skipping hardreset on occupied port
[ 2388.560037] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2388.584161] ata6.00: configured for UDMA/100
[ 2388.584578] ata6: EH complete
[ 2411.084085] CPU0: Core temperature above threshold, cpu clock throttled (total events = 262317)
[ 2411.084571] CPU0: Core temperature/speed normal
[ 2450.020065] ata6: drained 65536 bytes to clear DRQ
[ 2450.044137] ata6.00: limiting speed to UDMA/66:PIO4
[ 2450.044142] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 2450.044147] ata6: SError: { LinkSeq TrStaTrns }
[ 2450.044152] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2450.044167] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2450.044168] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2450.044172] ata6.00: status: { DRDY }
[ 2450.044177] ata6: hard resetting link
[ 2450.044179] ata6: nv: skipping hardreset on occupied port
[ 2450.512043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2450.536145] ata6.00: configured for UDMA/66
[ 2450.536577] ata6: EH complete
[ 2474.988026] [Hardware Error]: Machine check events logged
[ 2547.008014] ata6: drained 65536 bytes to clear DRQ
[ 2547.032209] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2547.032214] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2547.032219] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2547.032233] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2547.032235] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2547.032238] ata6.00: status: { DRDY }
[ 2547.032243] ata6: hard resetting link
[ 2547.032245] ata6: nv: skipping hardreset on occupied port
[ 2547.500057] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2547.524167] ata6.00: configured for UDMA/66
[ 2547.524584] ata6: EH complete
[ 2629.028003] ata6: drained 65536 bytes to clear DRQ
[ 2629.051945] ata6.00: limiting speed to UDMA/33:PIO4
[ 2629.051949] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2629.051954] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2629.051959] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2629.051974] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2629.051975] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2629.051978] ata6.00: status: { DRDY }
[ 2629.051983] ata6: hard resetting link
[ 2629.051985] ata6: nv: skipping hardreset on occupied port
[ 2629.516054] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2629.540149] ata6.00: configured for UDMA/33
[ 2629.540573] ata6: EH complete
[ 2711.084488] CPU0: Core temperature above threshold, cpu clock throttled (total events = 316307)
[ 2711.084975] CPU0: Core temperature/speed normal
[ 2808.036005] ata6: drained 65536 bytes to clear DRQ
[ 2808.060752] ata6.00: limiting speed to PIO4
[ 2808.060756] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2808.060761] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2808.060766] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2808.060788] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2808.060789] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2808.060792] ata6.00: status: { DRDY }
[ 2808.060798] ata6: hard resetting link
[ 2808.060800] ata6: nv: skipping hardreset on occupied port
[ 2808.528030] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2808.552169] ata6.00: configured for PIO4
[ 2808.552600] ata6: EH complete
[ 2843.022781] ata6: drained 65536 bytes to clear DRQ
[ 2843.033700] ata6.00: limiting speed to PIO3
[ 2843.033705] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 2843.033710] ata6: SError: { LinkSeq TrStaTrns }
[ 2843.033714] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2843.033729] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2843.033731] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2843.033734] ata6.00: status: { DRDY }
[ 2843.033739] ata6: hard resetting link
[ 2843.033742] ata6: nv: skipping hardreset on occupied port
[ 2843.500083] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2843.524161] ata6.00: configured for PIO3
[ 2843.524584] ata6: EH complete
[ 2876.068003] ata6: drained 65536 bytes to clear DRQ
[ 2876.092797] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2876.092802] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2876.092807] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2876.092822] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2876.092823] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2876.092826] ata6.00: status: { DRDY }
[ 2876.092832] ata6: hard resetting link
[ 2876.092834] ata6: nv: skipping hardreset on occupied port
[ 2876.560052] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2876.584142] ata6.00: configured for PIO3
[ 2876.584572] ata6: EH complete
[ 2924.036003] ata6: drained 65536 bytes to clear DRQ
[ 2924.060136] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2924.060141] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2924.060146] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2924.060160] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2924.060162] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2924.060165] ata6.00: status: { DRDY }
[ 2924.060170] ata6: hard resetting link
[ 2924.060172] ata6: nv: skipping hardreset on occupied port
[ 2924.528035] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2924.552174] ata6.00: configured for PIO3
[ 2929.552024] ata6.00: qc timeout (cmd 0xa0)
[ 2929.552028] ata6.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 2929.552034] ata6: hard resetting link
[ 2929.552036] ata6: nv: skipping hardreset on occupied port
[ 2930.020028] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2930.044146] ata6.00: configured for PIO3
[ 2930.044573] ata6: EH complete
[ 2993.060013] ata6: drained 65536 bytes to clear DRQ
[ 2993.084283] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 2993.084288] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 2993.084293] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 2993.084309] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 2993.084310] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2993.084313] ata6.00: status: { DRDY }
[ 2993.084318] ata6: hard resetting link
[ 2993.084320] ata6: nv: skipping hardreset on occupied port
[ 2993.552035] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2993.576152] ata6.00: configured for PIO3
[ 2993.576567] ata6: EH complete
[ 2999.988018] [Hardware Error]: Machine check events logged
[ 3011.084027] CPU0: Core temperature/speed normal
[ 3038.020055] ata6: drained 65536 bytes to clear DRQ
[ 3038.044331] ata6.00: limiting speed to PIO0
[ 3038.044336] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3038.044342] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3038.044348] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3038.044368] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3038.044369] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3038.044373] ata6.00: status: { DRDY }
[ 3038.044380] ata6: hard resetting link
[ 3038.044383] ata6: nv: skipping hardreset on occupied port
[ 3038.512107] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3038.536294] ata6.00: configured for PIO0
[ 3038.536739] ata6: EH complete
[ 3088.036015] ata6: drained 65536 bytes to clear DRQ
[ 3088.060318] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3088.060324] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3088.060330] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3088.060345] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3088.060346] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3088.060349] ata6.00: status: { DRDY }
[ 3088.060355] ata6: hard resetting link
[ 3088.060357] ata6: nv: skipping hardreset on occupied port
[ 3088.528050] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3088.552246] ata6.00: configured for PIO0
[ 3088.552695] ata6: EH complete
[ 3121.060034] ata6: drained 65536 bytes to clear DRQ
[ 3121.085088] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 3121.085093] ata6: SError: { LinkSeq TrStaTrns }
[ 3121.085097] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3121.085112] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3121.085113] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3121.085116] ata6.00: status: { DRDY }
[ 3121.085121] ata6: hard resetting link
[ 3121.085123] ata6: nv: skipping hardreset on occupied port
[ 3121.556683] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3121.584252] ata6.00: configured for PIO0
[ 3121.584670] ata6: EH complete
[ 3149.992051] [Hardware Error]: Machine check events logged
[ 3175.024953] ata6: drained 65536 bytes to clear DRQ
[ 3175.036693] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3175.036698] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3175.036703] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3175.036718] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3175.036719] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3175.036722] ata6.00: status: { DRDY }
[ 3175.036728] ata6: hard resetting link
[ 3175.036730] ata6: nv: skipping hardreset on occupied port
[ 3175.508148] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3175.532264] ata6.00: configured for PIO0
[ 3175.533645] ata6: EH complete
[ 3217.032024] ata6: drained 65536 bytes to clear DRQ
[ 3217.056272] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 3217.056277] ata6: SError: { LinkSeq TrStaTrns }
[ 3217.056281] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3217.056296] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3217.056298] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3217.056301] ata6.00: status: { DRDY }
[ 3217.056306] ata6: hard resetting link
[ 3217.056308] ata6: nv: skipping hardreset on occupied port
[ 3217.524148] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3217.560206] ata6.00: configured for PIO0
[ 3217.560664] ata6: EH complete
[ 3255.013870] ata6: drained 65536 bytes to clear DRQ
[ 3255.038591] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 3255.038596] ata6: SError: { LinkSeq TrStaTrns }
[ 3255.038601] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3255.038616] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3255.038617] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3255.038620] ata6.00: status: { DRDY }
[ 3255.038626] ata6: hard resetting link
[ 3255.038628] ata6: nv: skipping hardreset on occupied port
[ 3255.504037] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3255.528157] ata6.00: configured for PIO0
[ 3255.528583] ata6: EH complete
[ 3311.084213] CPU0: Core temperature above threshold, cpu clock throttled (total events = 533358)
[ 3311.084701] CPU0: Core temperature/speed normal
[ 3358.020003] ata6: drained 65536 bytes to clear DRQ
[ 3358.044260] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3358.044265] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3358.044270] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3358.044285] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3358.044286] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3358.044289] ata6.00: status: { DRDY }
[ 3358.044295] ata6: hard resetting link
[ 3358.044297] ata6: nv: skipping hardreset on occupied port
[ 3358.512026] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3358.536141] ata6.00: configured for PIO0
[ 3358.537460] ata6: EH complete
[ 3374.992037] [Hardware Error]: Machine check events logged
[ 3430.020002] ata6: drained 65536 bytes to clear DRQ
[ 3430.044854] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3430.044859] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3430.044864] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3430.044879] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3430.044880] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3430.044883] ata6.00: status: { DRDY }
[ 3430.044889] ata6: hard resetting link
[ 3430.044891] ata6: nv: skipping hardreset on occupied port
[ 3430.512087] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3430.536164] ata6.00: configured for PIO0
[ 3430.536587] ata6: EH complete
[ 3472.044457] ata6: drained 65536 bytes to clear DRQ
[ 3472.060411] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 3472.060416] ata6: SError: { LinkSeq TrStaTrns }
[ 3472.060421] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3472.060436] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3472.060437] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3472.060440] ata6.00: status: { DRDY }
[ 3472.060446] ata6: hard resetting link
[ 3472.060448] ata6: nv: skipping hardreset on occupied port
[ 3472.528034] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3472.552168] ata6.00: configured for PIO0
[ 3472.553474] ata6: EH complete
[ 3587.044033] ata6: drained 65536 bytes to clear DRQ
[ 3587.071384] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3587.071389] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3587.071393] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3587.071408] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3587.071409] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3587.071412] ata6.00: status: { DRDY }
[ 3587.071418] ata6: hard resetting link
[ 3587.071420] ata6: nv: skipping hardreset on occupied port
[ 3587.536033] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3587.560282] ata6.00: configured for PIO0
[ 3587.560740] ata6: EH complete
[ 3611.086823] CPU0: Core temperature above threshold, cpu clock throttled (total events = 627244)
[ 3611.087306] CPU0: Core temperature/speed normal
[ 3692.036064] ata6: drained 65536 bytes to clear DRQ
[ 3692.060391] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3692.060396] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3692.060401] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3692.060416] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3692.060417] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3692.060420] ata6.00: status: { DRDY }
[ 3692.060425] ata6: hard resetting link
[ 3692.060427] ata6: nv: skipping hardreset on occupied port
[ 3692.528034] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3692.552153] ata6.00: configured for PIO0
[ 3692.552595] ata6: EH complete
[ 3762.024032] ata6: drained 65536 bytes to clear DRQ
[ 3762.048595] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3762.048600] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3762.048605] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3762.048620] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3762.048622] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3762.048625] ata6.00: status: { DRDY }
[ 3762.048631] ata6: hard resetting link
[ 3762.048633] ata6: nv: skipping hardreset on occupied port
[ 3762.512117] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3762.540224] ata6.00: configured for PIO0
[ 3762.540681] ata6: EH complete
[ 3899.988079] [Hardware Error]: Machine check events logged
[ 3911.084366] CPU0: Core temperature above threshold, cpu clock throttled (total events = 763427)
[ 3911.084854] CPU0: Core temperature/speed normal
[ 3914.084078] ata6: drained 65536 bytes to clear DRQ
[ 3914.108757] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 3914.108763] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 3914.108779] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3914.108800] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3914.108801] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3914.108805] ata6.00: status: { DRDY }
[ 3914.108812] ata6: hard resetting link
[ 3914.108815] ata6: nv: skipping hardreset on occupied port
[ 3914.576101] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3914.608310] ata6.00: configured for PIO0
[ 3914.608761] ata6: EH complete
[ 3964.068046] ata6: drained 65536 bytes to clear DRQ
[ 3964.092982] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 3964.092988] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 3964.092994] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3964.093009] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 3964.093010] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3964.093013] ata6.00: status: { DRDY }
[ 3964.093020] ata6: hard resetting link
[ 3964.093023] ata6: nv: skipping hardreset on occupied port
[ 3964.560129] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3964.588318] ata6.00: configured for PIO0
[ 3964.588767] ata6: EH complete
[ 4049.064045] ata6: drained 65536 bytes to clear DRQ
[ 4049.088703] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 4049.088708] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 4049.088713] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4049.088728] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4049.088729] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4049.088733] ata6.00: status: { DRDY }
[ 4049.088738] ata6: hard resetting link
[ 4049.088740] ata6: nv: skipping hardreset on occupied port
[ 4049.556105] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4049.580288] ata6.00: configured for PIO0
[ 4049.580717] ata6: EH complete
[ 4049.984079] [Hardware Error]: Machine check events logged
[ 4211.085751] CPU0: Core temperature above threshold, cpu clock throttled (total events = 988284)
[ 4211.086239] CPU0: Core temperature/speed normal
[ 4274.972082] [Hardware Error]: Machine check events logged
[ 4326.052056] ata6: drained 65536 bytes to clear DRQ
[ 4326.076661] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 4326.076667] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 4326.076672] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4326.076687] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4326.076688] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4326.076691] ata6.00: status: { DRDY }
[ 4326.076698] ata6: hard resetting link
[ 4326.076700] ata6: nv: skipping hardreset on occupied port
[ 4326.548114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4326.576249] ata6.00: configured for PIO0
[ 4326.576678] ata6: EH complete
[ 4368.061098] ata6: drained 65536 bytes to clear DRQ
[ 4368.066380] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 4368.066386] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 4368.066391] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4368.066407] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4368.066408] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4368.066411] ata6.00: status: { DRDY }
[ 4368.066418] ata6: hard resetting link
[ 4368.066421] ata6: nv: skipping hardreset on occupied port
[ 4368.528090] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4368.556183] ata6.00: configured for PIO0
[ 4368.556612] ata6: EH complete
[ 4469.016033] ata6: drained 65536 bytes to clear DRQ
[ 4469.041156] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 4469.041162] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 4469.041167] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4469.041181] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4469.041183] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4469.041186] ata6.00: status: { DRDY }
[ 4469.041192] ata6: hard resetting link
[ 4469.041194] ata6: nv: skipping hardreset on occupied port
[ 4469.508125] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4469.536204] ata6.00: configured for PIO0
[ 4469.536663] ata6: EH complete
[ 4511.085334] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1222610)
[ 4511.085822] CPU0: Core temperature/speed normal
[ 4533.096062] ata6: drained 65536 bytes to clear DRQ
[ 4533.120098] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 4533.120103] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 4533.120108] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4533.120123] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4533.120124] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4533.120127] ata6.00: status: { DRDY }
[ 4533.120132] ata6: hard resetting link
[ 4533.120134] ata6: nv: skipping hardreset on occupied port
[ 4533.592106] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4533.624178] ata6.00: configured for PIO0
[ 4533.624618] ata6: EH complete
[ 4605.032031] ata6: drained 65536 bytes to clear DRQ
[ 4605.056135] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 4605.056140] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 4605.056145] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4605.056159] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4605.056160] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4605.056164] ata6.00: status: { DRDY }
[ 4605.056169] ata6: hard resetting link
[ 4605.056171] ata6: nv: skipping hardreset on occupied port
[ 4605.532043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4605.564291] ata6.00: configured for PIO0
[ 4605.564746] ata6: EH complete
[ 4645.032076] ata6: drained 65536 bytes to clear DRQ
[ 4645.056267] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 4645.056273] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 4645.056278] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4645.056293] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4645.056294] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4645.056297] ata6.00: status: { DRDY }
[ 4645.056303] ata6: hard resetting link
[ 4645.056305] ata6: nv: skipping hardreset on occupied port
[ 4645.533047] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4645.564215] ata6.00: configured for PIO0
[ 4645.564658] ata6: EH complete
[ 4683.012076] ata6: drained 65536 bytes to clear DRQ
[ 4683.036162] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1900000 action 0x6 frozen
[ 4683.036167] ata6: SError: { Dispar LinkSeq TrStaTrns }
[ 4683.036172] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4683.036187] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4683.036188] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4683.036191] ata6.00: status: { DRDY }
[ 4683.036196] ata6: hard resetting link
[ 4683.036198] ata6: nv: skipping hardreset on occupied port
[ 4688.512062] ata6: link is slow to respond, please be patient (ready=0)
[ 4693.080066] ata6: SRST failed (errno=-16)
[ 4693.080072] ata6: hard resetting link
[ 4693.080075] ata6: nv: skipping hardreset on occupied port
[ 4693.552073] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4693.588149] ata6.00: configured for PIO0
[ 4693.588654] ata6: EH complete
[ 4765.012054] ata6: drained 65536 bytes to clear DRQ
[ 4765.036441] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 4765.036446] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 4765.036450] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4765.036465] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4765.036466] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4765.036470] ata6.00: status: { DRDY }
[ 4765.036475] ata6: hard resetting link
[ 4765.036477] ata6: nv: skipping hardreset on occupied port
[ 4765.512202] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4765.540192] ata6.00: configured for PIO0
[ 4765.540623] ata6: EH complete
[ 4799.944024] [Hardware Error]: Machine check events logged
[ 4811.084297] CPU0: Core temperature/speed normal
[ 4917.096073] ata6: drained 65536 bytes to clear DRQ
[ 4917.120098] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 4917.120103] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 4917.120108] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4917.120123] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4917.120124] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4917.120127] ata6.00: status: { DRDY }
[ 4917.120132] ata6: hard resetting link
[ 4917.120134] ata6: nv: skipping hardreset on occupied port
[ 4917.592063] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4917.620228] ata6.00: configured for PIO0
[ 4917.620679] ata6: EH complete
[ 4949.936037] [Hardware Error]: Machine check events logged
[ 4975.080082] ata6: drained 65536 bytes to clear DRQ
[ 4975.104074] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 4975.104080] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 4975.104084] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 4975.104099] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 4975.104101] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 4975.104104] ata6.00: status: { DRDY }
[ 4975.104109] ata6: hard resetting link
[ 4975.104111] ata6: nv: skipping hardreset on occupied port
[ 4975.580113] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4975.612218] ata6.00: configured for PIO0
[ 4975.612649] ata6: EH complete
[ 5020.040037] ata6: drained 65536 bytes to clear DRQ
[ 5020.064396] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 5020.064402] ata6: SError: { LinkSeq TrStaTrns }
[ 5020.064406] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5020.064421] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5020.064422] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5020.064425] ata6.00: status: { DRDY }
[ 5020.064431] ata6: hard resetting link
[ 5020.064433] ata6: nv: skipping hardreset on occupied port
[ 5025.600078] ata6: link is slow to respond, please be patient (ready=0)
[ 5030.112091] ata6: SRST failed (errno=-16)
[ 5030.112098] ata6: hard resetting link
[ 5030.112101] ata6: nv: skipping hardreset on occupied port
[ 5030.584100] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5030.612278] ata6.00: configured for PIO0
[ 5030.613627] ata6: EH complete
[ 5070.040024] ata6: drained 65536 bytes to clear DRQ
[ 5070.048054] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 5070.048059] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 5070.048064] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5070.048079] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5070.048080] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5070.048083] ata6.00: status: { DRDY }
[ 5070.048088] ata6: hard resetting link
[ 5070.048090] ata6: nv: skipping hardreset on occupied port
[ 5070.524112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5070.556228] ata6.00: configured for PIO0
[ 5070.556668] ata6: EH complete
[ 5111.085031] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1754718)
[ 5111.085517] CPU0: Core temperature/speed normal
[ 5181.028082] ata6: drained 65536 bytes to clear DRQ
[ 5181.052075] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 5181.052080] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 5181.052084] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5181.052099] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5181.052100] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5181.052103] ata6.00: status: { DRDY }
[ 5181.052109] ata6: hard resetting link
[ 5181.052111] ata6: nv: skipping hardreset on occupied port
[ 5181.528099] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5181.552207] ata6.00: configured for PIO0
[ 5181.552650] ata6: EH complete
[ 5235.048073] ata6: drained 65536 bytes to clear DRQ
[ 5235.072020] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1900000 action 0x6 frozen
[ 5235.072025] ata6: SError: { Dispar LinkSeq TrStaTrns }
[ 5235.072030] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5235.072045] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5235.072046] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5235.072049] ata6.00: status: { DRDY }
[ 5235.072054] ata6: hard resetting link
[ 5235.072056] ata6: nv: skipping hardreset on occupied port
[ 5235.536112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5235.568224] ata6.00: configured for PIO0
[ 5235.568649] ata6: EH complete
[ 5362.020063] ata6: drained 65536 bytes to clear DRQ
[ 5362.043969] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 5362.043974] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 5362.043979] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5362.043993] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5362.043994] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5362.043997] ata6.00: status: { DRDY }
[ 5362.044007] ata6: hard resetting link
[ 5362.044010] ata6: nv: skipping hardreset on occupied port
[ 5362.508267] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5362.536224] ata6.00: configured for PIO0
[ 5362.536655] ata6: EH complete
[ 5411.084136] CPU0: Core temperature/speed normal
[ 5418.084083] ata6: drained 65536 bytes to clear DRQ
[ 5418.108045] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 5418.108050] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 5418.108054] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5418.108069] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5418.108071] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5418.108074] ata6.00: status: { DRDY }
[ 5418.108079] ata6: hard resetting link
[ 5418.108081] ata6: nv: skipping hardreset on occupied port
[ 5418.576113] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5418.604215] ata6.00: configured for PIO0
[ 5418.604647] ata6: EH complete
[ 5468.036104] ata6: drained 65536 bytes to clear DRQ
[ 5468.060001] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 5468.060015] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 5468.060019] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5468.060034] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5468.060036] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5468.060039] ata6.00: status: { DRDY }
[ 5468.060044] ata6: hard resetting link
[ 5468.060046] ata6: nv: skipping hardreset on occupied port
[ 5468.532094] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5468.568233] ata6.00: configured for PIO0
[ 5468.568671] ata6: EH complete
[ 5516.040012] ata6: drained 65536 bytes to clear DRQ
[ 5516.063936] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 5516.063941] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 5516.063945] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5516.063960] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5516.063961] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5516.063965] ata6.00: status: { DRDY }
[ 5516.063970] ata6: hard resetting link
[ 5516.063972] ata6: nv: skipping hardreset on occupied port
[ 5516.528120] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5516.560222] ata6.00: configured for PIO0
[ 5516.560629] ata6: EH complete
[ 5609.060052] ata6: drained 65536 bytes to clear DRQ
[ 5609.084532] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 5609.084537] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 5609.084542] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5609.084557] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5609.084558] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5609.084561] ata6.00: status: { DRDY }
[ 5609.084566] ata6: hard resetting link
[ 5609.084568] ata6: nv: skipping hardreset on occupied port
[ 5609.556061] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5609.592217] ata6.00: configured for PIO0
[ 5609.592645] ata6: EH complete
[ 5647.016103] ata6: drained 65536 bytes to clear DRQ
[ 5647.040366] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 5647.040371] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 5647.040375] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5647.040390] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5647.040391] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5647.040394] ata6.00: status: { DRDY }
[ 5647.040399] ata6: hard resetting link
[ 5647.040401] ata6: nv: skipping hardreset on occupied port
[ 5647.508105] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5647.540225] ata6.00: configured for PIO0
[ 5647.540641] ata6: EH complete
[ 5711.084087] CPU0: Core temperature above threshold, cpu clock throttled (total events = 2265156)
[ 5711.084575] CPU0: Core temperature/speed normal
[ 5734.052052] ata6: drained 65536 bytes to clear DRQ
[ 5734.076021] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 5734.076026] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 5734.076031] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5734.076045] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5734.076047] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5734.076050] ata6.00: status: { DRDY }
[ 5734.076055] ata6: hard resetting link
[ 5734.076057] ata6: nv: skipping hardreset on occupied port
[ 5734.544119] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5734.568219] ata6.00: configured for PIO0
[ 5734.568638] ata6: EH complete
[ 5907.044062] ata6: drained 65536 bytes to clear DRQ
[ 5907.068118] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 5907.068124] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 5907.068129] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 5907.068144] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 5907.068145] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 5907.068148] ata6.00: status: { DRDY }
[ 5907.068154] ata6: hard resetting link
[ 5907.068156] ata6: nv: skipping hardreset on occupied port
[ 5907.544113] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5907.568214] ata6.00: configured for PIO0
[ 5907.568645] ata6: EH complete
[ 6011.084108] CPU0: Core temperature above threshold, cpu clock throttled (total events = 2514029)
[ 6011.084596] CPU0: Core temperature/speed normal
[ 6072.020112] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6072.020119] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6072.020125] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6072.020145] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6072.020146] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6072.020150] ata6.00: status: { DRDY }
[ 6072.020157] ata6: hard resetting link
[ 6072.020159] ata6: nv: skipping hardreset on occupied port
[ 6077.528119] ata6: link is slow to respond, please be patient (ready=0)
[ 6082.068059] ata6: SRST failed (errno=-16)
[ 6082.068065] ata6: hard resetting link
[ 6082.068067] ata6: nv: skipping hardreset on occupied port
[ 6082.540093] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6082.572342] ata6.00: configured for PIO0
[ 6082.572778] ata6: EH complete
[ 6144.100043] ata6: drained 65536 bytes to clear DRQ
[ 6144.124113] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 6144.124119] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 6144.124124] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6144.124139] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6144.124140] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6144.124143] ata6.00: status: { DRDY }
[ 6144.124149] ata6: hard resetting link
[ 6144.124151] ata6: nv: skipping hardreset on occupied port
[ 6144.596114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6144.620285] ata6.00: configured for PIO0
[ 6144.621630] ata6: EH complete
[ 6208.104072] ata6: drained 65536 bytes to clear DRQ
[ 6208.127981] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6208.127986] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6208.127990] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6208.128011] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6208.128012] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6208.128016] ata6.00: status: { DRDY }
[ 6208.128021] ata6: hard resetting link
[ 6208.128023] ata6: nv: skipping hardreset on occupied port
[ 6208.604139] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6208.628172] ata6.00: configured for PIO0
[ 6208.628583] ata6: EH complete
[ 6258.024073] ata6: drained 65536 bytes to clear DRQ
[ 6258.048024] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6258.048030] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6258.048036] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6258.048051] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6258.048053] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6258.048056] ata6.00: status: { DRDY }
[ 6258.048063] ata6: hard resetting link
[ 6258.048065] ata6: nv: skipping hardreset on occupied port
[ 6258.520146] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6258.548281] ata6.00: configured for PIO0
[ 6258.548722] ata6: EH complete
[ 6306.024104] ata6: drained 65536 bytes to clear DRQ
[ 6306.048234] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6306.048239] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6306.048245] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6306.048260] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6306.048261] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6306.048264] ata6.00: status: { DRDY }
[ 6306.048269] ata6: hard resetting link
[ 6306.048271] ata6: nv: skipping hardreset on occupied port
[ 6306.520156] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6306.548284] ata6.00: configured for PIO0
[ 6311.084218] CPU0: Core temperature/speed normal
[ 6311.552131] ata6.00: qc timeout (cmd 0xa0)
[ 6311.552137] ata6.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 6311.552145] ata6: hard resetting link
[ 6311.552148] ata6: nv: skipping hardreset on occupied port
[ 6312.028059] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6312.056378] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 6312.056382] ata6.00: revalidation failed (errno=-22)
[ 6317.024092] ata6: hard resetting link
[ 6317.024096] ata6: nv: skipping hardreset on occupied port
[ 6317.500104] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6317.532227] ata6.00: configured for PIO0
[ 6317.533516] ata6: EH complete
[ 6409.064025] ata6: drained 65536 bytes to clear DRQ
[ 6409.088078] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6409.088084] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6409.088088] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6409.088103] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6409.088104] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6409.088107] ata6.00: status: { DRDY }
[ 6409.088112] ata6: hard resetting link
[ 6409.088114] ata6: nv: skipping hardreset on occupied port
[ 6409.560092] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6409.588200] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 6409.588205] ata6.00: revalidation failed (errno=-22)
[ 6414.560073] ata6: hard resetting link
[ 6414.560078] ata6: nv: skipping hardreset on occupied port
[ 6415.028100] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6415.052305] ata6.00: configured for PIO0
[ 6415.052750] ata6: EH complete
[ 6462.052084] ata6: drained 65536 bytes to clear DRQ
[ 6462.076717] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 6462.076723] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 6462.076729] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6462.076744] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6462.076746] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6462.076749] ata6.00: status: { DRDY }
[ 6462.076756] ata6: hard resetting link
[ 6462.076759] ata6: nv: skipping hardreset on occupied port
[ 6462.552107] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6462.580262] ata6.00: configured for PIO0
[ 6462.580731] ata6: EH complete
[ 6500.020082] ata6: drained 65536 bytes to clear DRQ
[ 6500.045201] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6500.045207] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6500.045213] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6500.045228] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6500.045229] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6500.045245] ata6.00: status: { DRDY }
[ 6500.045251] ata6: hard resetting link
[ 6500.045253] ata6: nv: skipping hardreset on occupied port
[ 6505.568084] ata6: link is slow to respond, please be patient (ready=0)
[ 6510.064087] ata6: SRST failed (errno=-16)
[ 6510.064093] ata6: hard resetting link
[ 6510.064096] ata6: nv: skipping hardreset on occupied port
[ 6510.532131] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6510.564231] ata6.00: configured for PIO0
[ 6510.564659] ata6: EH complete
[ 6576.012073] ata6: drained 65536 bytes to clear DRQ
[ 6576.036528] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6576.036533] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6576.036538] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6576.036553] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6576.036554] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6576.036557] ata6.00: status: { DRDY }
[ 6576.036564] ata6: hard resetting link
[ 6576.036566] ata6: nv: skipping hardreset on occupied port
[ 6576.508107] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6576.536241] ata6.00: configured for PIO0
[ 6576.536659] ata6: EH complete
[ 6611.084673] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3060934)
[ 6611.085160] CPU0: Core temperature/speed normal
[ 6613.012063] ata6: drained 65536 bytes to clear DRQ
[ 6613.036227] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6613.036233] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6613.036238] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6613.036253] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6613.036254] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6613.036257] ata6.00: status: { DRDY }
[ 6613.036263] ata6: hard resetting link
[ 6613.036265] ata6: nv: skipping hardreset on occupied port
[ 6613.512101] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6613.536640] ata6.00: configured for PIO0
[ 6613.537088] ata6: EH complete
[ 6675.048024] ata6: drained 65536 bytes to clear DRQ
[ 6675.072268] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6675.072274] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6675.072279] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6675.072295] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6675.072296] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6675.072299] ata6.00: status: { DRDY }
[ 6675.072305] ata6: hard resetting link
[ 6675.072308] ata6: nv: skipping hardreset on occupied port
[ 6675.544451] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6675.576216] ata6.00: configured for PIO0
[ 6675.576663] ata6: EH complete
[ 6838.020083] ata6: drained 65536 bytes to clear DRQ
[ 6838.044176] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6838.044182] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6838.044187] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6838.044202] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6838.044203] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6838.044206] ata6.00: status: { DRDY }
[ 6838.044212] ata6: hard resetting link
[ 6838.044214] ata6: nv: skipping hardreset on occupied port
[ 6838.512112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6838.536224] ata6.00: configured for PIO0
[ 6838.536646] ata6: EH complete
[ 6892.068064] ata6: drained 65536 bytes to clear DRQ
[ 6892.092237] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6892.092243] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6892.092248] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6892.092263] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6892.092264] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6892.092267] ata6.00: status: { DRDY }
[ 6892.092273] ata6: hard resetting link
[ 6892.092275] ata6: nv: skipping hardreset on occupied port
[ 6892.560114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6892.584220] ata6.00: configured for PIO0
[ 6892.584663] ata6: EH complete
[ 6911.085083] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3318936)
[ 6911.085570] CPU0: Core temperature/speed normal
[ 6971.044063] ata6: drained 65536 bytes to clear DRQ
[ 6971.068069] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 6971.068074] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 6971.068079] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 6971.068094] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 6971.068095] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 6971.068098] ata6.00: status: { DRDY }
[ 6971.068104] ata6: hard resetting link
[ 6971.068106] ata6: nv: skipping hardreset on occupied port
[ 6971.536113] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6971.562502] ata6.00: configured for PIO0
[ 6971.564226] ata6: EH complete
[ 7004.068055] ata6: drained 65536 bytes to clear DRQ
[ 7004.092098] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 7004.092104] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 7004.092108] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7004.092123] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7004.092124] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7004.092127] ata6.00: status: { DRDY }
[ 7004.092132] ata6: hard resetting link
[ 7004.092135] ata6: nv: skipping hardreset on occupied port
[ 7004.560057] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7004.584577] ata6.00: configured for PIO0
[ 7004.584999] ata6: EH complete
[ 7107.012006] ata6: drained 65536 bytes to clear DRQ
[ 7107.037033] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7107.037039] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7107.037045] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7107.037059] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7107.037061] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7107.037064] ata6.00: status: { DRDY }
[ 7107.037070] ata6: hard resetting link
[ 7107.037072] ata6: nv: skipping hardreset on occupied port
[ 7107.504088] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7107.528445] ata6.00: configured for PIO0
[ 7107.528946] ata6: EH complete
[ 7210.020076] ata6: drained 65536 bytes to clear DRQ
[ 7210.044364] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7210.044370] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7210.044375] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7210.044389] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7210.044391] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7210.044394] ata6.00: status: { DRDY }
[ 7210.044399] ata6: hard resetting link
[ 7210.044402] ata6: nv: skipping hardreset on occupied port
[ 7210.512072] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7210.536227] ata6.00: configured for PIO0
[ 7210.536645] ata6: EH complete
[ 7211.084472] CPU0: Core temperature/speed normal
[ 7307.108072] ata6: drained 65536 bytes to clear DRQ
[ 7307.132636] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 7307.132641] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 7307.132646] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7307.132661] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7307.132663] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7307.132666] ata6.00: status: { DRDY }
[ 7307.132671] ata6: hard resetting link
[ 7307.132673] ata6: nv: skipping hardreset on occupied port
[ 7307.600094] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7307.624182] ata6.00: configured for PIO0
[ 7307.624674] ata6: EH complete
[ 7371.108062] ata6: drained 65536 bytes to clear DRQ
[ 7371.132051] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7371.132057] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7371.132062] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7371.132077] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7371.132078] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7371.132081] ata6.00: status: { DRDY }
[ 7371.132087] ata6: hard resetting link
[ 7371.132089] ata6: nv: skipping hardreset on occupied port
[ 7371.600088] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7371.624231] ata6.00: configured for PIO0
[ 7371.624677] ata6: EH complete
[ 7417.028065] ata6: drained 65536 bytes to clear DRQ
[ 7417.052283] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 7417.052288] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 7417.052294] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7417.052309] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7417.052310] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7417.052313] ata6.00: status: { DRDY }
[ 7417.052319] ata6: hard resetting link
[ 7417.052321] ata6: nv: skipping hardreset on occupied port
[ 7417.520089] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7417.544213] ata6.00: configured for PIO0
[ 7417.545586] ata6: EH complete
[ 7511.084167] CPU0: Core temperature/speed normal
[ 7573.100025] ata6: drained 65536 bytes to clear DRQ
[ 7573.120068] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7573.120073] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7573.120078] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7573.120093] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7573.120094] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7573.120097] ata6.00: status: { DRDY }
[ 7573.120103] ata6: hard resetting link
[ 7573.120105] ata6: nv: skipping hardreset on occupied port
[ 7573.588048] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7573.620228] ata6.00: configured for PIO0
[ 7573.620648] ata6: EH complete
[ 7627.044014] ata6: drained 65536 bytes to clear DRQ
[ 7627.068039] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7627.068045] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7627.068050] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7627.068065] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7627.068069] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7627.068077] ata6.00: status: { DRDY }
[ 7627.068086] ata6: hard resetting link
[ 7627.068091] ata6: nv: skipping hardreset on occupied port
[ 7627.536068] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7627.561235] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 7627.561239] ata6.00: revalidation failed (errno=-22)
[ 7632.540077] ata6: hard resetting link
[ 7632.540081] ata6: nv: skipping hardreset on occupied port
[ 7633.008083] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7633.040225] ata6.00: configured for PIO0
[ 7633.040657] ata6: EH complete
[ 7731.008063] ata6: drained 65536 bytes to clear DRQ
[ 7731.032085] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7731.032090] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7731.032095] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7731.032110] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7731.032111] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7731.032114] ata6.00: status: { DRDY }
[ 7731.032119] ata6: hard resetting link
[ 7731.032121] ata6: nv: skipping hardreset on occupied port
[ 7731.508112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7731.532228] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 7731.532232] ata6.00: revalidation failed (errno=-22)
[ 7736.508088] ata6: hard resetting link
[ 7736.508093] ata6: nv: skipping hardreset on occupied port
[ 7736.980162] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7737.008257] ata6.00: configured for PIO0
[ 7737.008699] ata6: EH complete
[ 7796.068073] ata6: drained 65536 bytes to clear DRQ
[ 7796.092554] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7796.092560] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7796.092575] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7796.092590] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7796.092591] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7796.092595] ata6.00: status: { DRDY }
[ 7796.092600] ata6: hard resetting link
[ 7796.092602] ata6: nv: skipping hardreset on occupied port
[ 7796.568126] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7796.596670] ata6.00: configured for PIO0
[ 7796.597109] ata6: EH complete
[ 7811.085900] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4085486)
[ 7839.016073] ata6: drained 65536 bytes to clear DRQ
[ 7839.039995] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 7839.040000] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 7839.040012] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7839.040053] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7839.040057] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7839.040065] ata6.00: status: { DRDY }
[ 7839.040073] ata6: hard resetting link
[ 7839.040079] ata6: nv: skipping hardreset on occupied port
[ 7839.520109] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7839.548206] ata6.00: configured for PIO0
[ 7839.548637] ata6: EH complete
[ 7903.104823] ata6: drained 65536 bytes to clear DRQ
[ 7903.105915] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7903.105920] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7903.105926] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7903.105941] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7903.105942] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7903.105946] ata6.00: status: { DRDY }
[ 7903.105951] ata6: hard resetting link
[ 7903.105953] ata6: nv: skipping hardreset on occupied port
[ 7903.572119] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7903.596218] ata6.00: configured for PIO0
[ 7903.596664] ata6: EH complete
[ 7979.044046] ata6: drained 65536 bytes to clear DRQ
[ 7979.068410] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 7979.068416] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 7979.068420] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 7979.068435] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 7979.068436] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 7979.068439] ata6.00: status: { DRDY }
[ 7979.068444] ata6: hard resetting link
[ 7979.068446] ata6: nv: skipping hardreset on occupied port
[ 7979.532079] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7979.552227] ata6.00: configured for PIO0
[ 7979.552663] ata6: EH complete
[ 8103.012063] ata6: drained 65536 bytes to clear DRQ
[ 8103.036694] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8103.036699] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8103.036704] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8103.036719] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8103.036720] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8103.036723] ata6.00: status: { DRDY }
[ 8103.036729] ata6: hard resetting link
[ 8103.036731] ata6: nv: skipping hardreset on occupied port
[ 8103.504086] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8103.528218] ata6.00: configured for PIO0
[ 8103.528650] ata6: EH complete
[ 8111.085394] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4337135)
[ 8111.085880] CPU0: Core temperature/speed normal
[ 8145.028055] ata6: drained 65536 bytes to clear DRQ
[ 8145.052001] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8145.052014] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8145.052023] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8145.052065] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8145.052069] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8145.052077] ata6.00: status: { DRDY }
[ 8145.052085] ata6: hard resetting link
[ 8145.052091] ata6: nv: skipping hardreset on occupied port
[ 8145.520085] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8145.544150] ata6.00: configured for PIO0
[ 8145.544571] ata6: EH complete
[ 8267.108004] ata6: drained 65536 bytes to clear DRQ
[ 8267.132634] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8267.132640] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8267.132645] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8267.132660] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8267.132661] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8267.132665] ata6.00: status: { DRDY }
[ 8267.132670] ata6: hard resetting link
[ 8267.132672] ata6: nv: skipping hardreset on occupied port
[ 8267.600151] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8267.624230] ata6.00: configured for PIO0
[ 8267.625584] ata6: EH complete
[ 8311.012064] ata6: drained 65536 bytes to clear DRQ
[ 8311.035903] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8311.035908] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8311.035913] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8311.035928] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8311.035929] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8311.035933] ata6.00: status: { DRDY }
[ 8311.035938] ata6: hard resetting link
[ 8311.035940] ata6: nv: skipping hardreset on occupied port
[ 8311.500073] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8311.524268] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 8311.524274] ata6.00: revalidation failed (errno=-22)
[ 8316.500079] ata6: hard resetting link
[ 8316.500084] ata6: nv: skipping hardreset on occupied port
[ 8316.968114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8316.992226] ata6.00: configured for PIO0
[ 8316.992640] ata6: EH complete
[ 8358.020083] ata6: drained 65536 bytes to clear DRQ
[ 8358.044061] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8358.044067] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8358.044071] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8358.044086] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8358.044088] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8358.044091] ata6.00: status: { DRDY }
[ 8358.044096] ata6: hard resetting link
[ 8358.044098] ata6: nv: skipping hardreset on occupied port
[ 8358.512091] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8358.536208] ata6.00: configured for PIO0
[ 8358.536654] ata6: EH complete
[ 8411.084177] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4597201)
[ 8411.084663] CPU0: Core temperature/speed normal
[ 8449.060034] ata6: drained 65536 bytes to clear DRQ
[ 8449.084038] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8449.084043] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8449.084048] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8449.084063] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8449.084064] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8449.084067] ata6.00: status: { DRDY }
[ 8449.084072] ata6: hard resetting link
[ 8449.084074] ata6: nv: skipping hardreset on occupied port
[ 8449.552046] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8449.576170] ata6.00: configured for PIO0
[ 8449.577444] ata6: EH complete
[ 8491.012023] ata6: drained 65536 bytes to clear DRQ
[ 8491.035914] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1f80000 action 0x6 frozen
[ 8491.035920] ata6: SError: { 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns }
[ 8491.035924] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8491.035939] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8491.035941] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8491.035944] ata6.00: status: { DRDY }
[ 8491.035949] ata6: hard resetting link
[ 8491.035951] ata6: nv: skipping hardreset on occupied port
[ 8491.500084] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8491.524182] ata6.00: configured for PIO0
[ 8491.524622] ata6: EH complete
[ 8534.020063] ata6: drained 65536 bytes to clear DRQ
[ 8534.043981] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 8534.043986] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 8534.043992] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8534.044015] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8534.044019] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8534.044027] ata6.00: status: { DRDY }
[ 8534.044036] ata6: hard resetting link
[ 8534.044041] ata6: nv: skipping hardreset on occupied port
[ 8534.512114] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8534.536148] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 8534.536152] ata6.00: revalidation failed (errno=-22)
[ 8539.512089] ata6: hard resetting link
[ 8539.512093] ata6: nv: skipping hardreset on occupied port
[ 8539.980115] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8540.004443] ata6.00: configured for PIO0
[ 8540.004968] ata6: EH complete
[ 8589.028044] ata6: drained 65536 bytes to clear DRQ
[ 8589.052141] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8589.052147] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8589.052151] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8589.052166] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8589.052168] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8589.052171] ata6.00: status: { DRDY }
[ 8589.052176] ata6: hard resetting link
[ 8589.052178] ata6: nv: skipping hardreset on occupied port
[ 8589.520112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8589.544149] ata6.00: configured for PIO0
[ 8589.544562] ata6: EH complete
[ 8711.086914] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4834845)
[ 8711.087397] CPU0: Core temperature/speed normal
[ 8723.012041] ata6: drained 65536 bytes to clear DRQ
[ 8723.041482] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8723.041488] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8723.041493] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8723.041509] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8723.041510] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8723.041513] ata6.00: status: { DRDY }
[ 8723.041521] ata6: hard resetting link
[ 8723.041524] ata6: nv: skipping hardreset on occupied port
[ 8723.508103] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8723.532229] ata6.00: configured for PIO0
[ 8723.532727] ata6: EH complete
[ 8795.012054] ata6: drained 65536 bytes to clear DRQ
[ 8795.041150] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8795.041156] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8795.041162] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8795.041177] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8795.041178] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8795.041182] ata6.00: status: { DRDY }
[ 8795.041188] ata6: hard resetting link
[ 8795.041190] ata6: nv: skipping hardreset on occupied port
[ 8795.508112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8795.532258] ata6.00: configured for PIO0
[ 8795.532733] ata6: EH complete
[ 8851.044037] ata6: drained 65536 bytes to clear DRQ
[ 8851.073731] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8851.073737] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8851.073743] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8851.073758] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8851.073760] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8851.073763] ata6.00: status: { DRDY }
[ 8851.073770] ata6: hard resetting link
[ 8851.073772] ata6: nv: skipping hardreset on occupied port
[ 8851.540102] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8851.564258] ata6.00: configured for PIO0
[ 8851.565662] ata6: EH complete
[ 8887.012059] ata6: drained 65536 bytes to clear DRQ
[ 8887.042222] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8887.042229] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8887.042237] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8887.042254] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8887.042256] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8887.042259] ata6.00: status: { DRDY }
[ 8887.042267] ata6: hard resetting link
[ 8887.042269] ata6: nv: skipping hardreset on occupied port
[ 8887.512122] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8887.536278] ata6.00: configured for PIO0
[ 8887.536750] ata6: EH complete
[ 8929.032057] ata6: drained 65536 bytes to clear DRQ
[ 8929.061598] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 8929.061605] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 8929.061611] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8929.061626] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8929.061627] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8929.061630] ata6.00: status: { DRDY }
[ 8929.061649] ata6: hard resetting link
[ 8929.061652] ata6: nv: skipping hardreset on occupied port
[ 8929.524143] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8929.548245] ata6.00: configured for PIO0
[ 8929.548739] ata6: EH complete
[ 8968.020008] ata6: drained 65536 bytes to clear DRQ
[ 8968.049729] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 8968.049734] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 8968.049739] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 8968.049754] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 8968.049756] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 8968.049759] ata6.00: status: { DRDY }
[ 8968.049765] ata6: hard resetting link
[ 8968.049767] ata6: nv: skipping hardreset on occupied port
[ 8968.520117] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8968.544222] ata6.00: configured for PIO0
[ 8968.545797] ata6: EH complete
[ 9011.084619] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4957746)
[ 9011.085101] CPU0: Core temperature/speed normal
[ 9069.012067] ata6: drained 65536 bytes to clear DRQ
[ 9069.041221] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9069.041229] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9069.041235] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9069.041255] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9069.041257] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9069.041261] ata6.00: status: { DRDY }
[ 9069.041268] ata6: hard resetting link
[ 9069.041271] ata6: nv: skipping hardreset on occupied port
[ 9069.508096] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9069.532243] ata6.00: configured for PIO0
[ 9069.532704] ata6: EH complete
[ 9110.024078] ata6: drained 65536 bytes to clear DRQ
[ 9110.053794] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1980000 action 0x6 frozen
[ 9110.053803] ata6: SError: { 10B8B Dispar LinkSeq TrStaTrns }
[ 9110.053811] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9110.053833] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9110.053834] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9110.053838] ata6.00: status: { DRDY }
[ 9110.053849] ata6: hard resetting link
[ 9110.053852] ata6: nv: skipping hardreset on occupied port
[ 9115.556150] ata6: link is slow to respond, please be patient (ready=0)
[ 9120.096051] ata6: SRST failed (errno=-16)
[ 9120.096060] ata6: hard resetting link
[ 9120.096064] ata6: nv: skipping hardreset on occupied port
[ 9120.560089] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9120.588249] ata6.00: configured for PIO0
[ 9120.590581] ata6: EH complete
[ 9176.036064] ata6: drained 65536 bytes to clear DRQ
[ 9176.067020] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9176.067027] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9176.067033] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9176.067050] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9176.067051] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9176.067054] ata6.00: status: { DRDY }
[ 9176.067063] ata6: hard resetting link
[ 9176.067065] ata6: nv: skipping hardreset on occupied port
[ 9176.532112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9176.556234] ata6.00: configured for PIO0
[ 9176.557657] ata6: EH complete
[ 9238.116047] ata6: drained 65536 bytes to clear DRQ
[ 9238.146676] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9238.146686] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9238.146693] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9238.146714] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9238.146716] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9238.146720] ata6.00: status: { DRDY }
[ 9238.146730] ata6: hard resetting link
[ 9238.146733] ata6: nv: skipping hardreset on occupied port
[ 9238.612110] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9238.636236] ata6.00: configured for PIO0
[ 9238.636683] ata6: EH complete
[ 9311.084242] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5090866)
[ 9311.084724] CPU0: Core temperature/speed normal
[ 9327.076045] ata6: drained 65536 bytes to clear DRQ
[ 9327.106863] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9327.106873] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9327.106879] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9327.106901] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9327.106902] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9327.106908] ata6.00: status: { DRDY }
[ 9327.106916] ata6: hard resetting link
[ 9327.106919] ata6: nv: skipping hardreset on occupied port
[ 9327.572113] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9327.596232] ata6.00: configured for PIO0
[ 9327.596697] ata6: EH complete
[ 9444.068047] ata6: drained 65536 bytes to clear DRQ
[ 9444.098377] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9444.098385] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9444.098392] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9444.098409] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9444.098411] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9444.098414] ata6.00: status: { DRDY }
[ 9444.098421] ata6: hard resetting link
[ 9444.098423] ata6: nv: skipping hardreset on occupied port
[ 9444.564093] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9444.588273] ata6.00: configured for PIO0
[ 9444.588723] ata6: EH complete
[ 9498.084034] ata6: drained 65536 bytes to clear DRQ
[ 9498.114063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d00000 action 0x6 frozen
[ 9498.114070] ata6: SError: { Dispar Handshk LinkSeq TrStaTrns }
[ 9498.114076] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9498.114096] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9498.114098] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9498.114103] ata6.00: status: { DRDY }
[ 9498.114110] ata6: hard resetting link
[ 9498.114113] ata6: nv: skipping hardreset on occupied port
[ 9498.584105] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9498.608245] ata6.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
[ 9498.608250] ata6.00: revalidation failed (errno=-22)
[ 9503.584089] ata6: hard resetting link
[ 9503.584094] ata6: nv: skipping hardreset on occupied port
[ 9504.052101] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9504.076271] ata6.00: configured for PIO0
[ 9504.077721] ata6: EH complete
[ 9553.060027] ata6: drained 65536 bytes to clear DRQ
[ 9553.090113] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9553.090119] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9553.090127] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9553.090143] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9553.090145] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9553.090148] ata6.00: status: { DRDY }
[ 9553.090156] ata6: hard resetting link
[ 9553.090158] ata6: nv: skipping hardreset on occupied port
[ 9553.556080] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9553.580255] ata6.00: configured for PIO0
[ 9553.580757] ata6: EH complete
[ 9611.084228] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5230786)
[ 9611.084710] CPU0: Core temperature/speed normal
[ 9767.012036] ata6: drained 65536 bytes to clear DRQ
[ 9767.042876] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1d80000 action 0x6 frozen
[ 9767.042884] ata6: SError: { 10B8B Dispar Handshk LinkSeq TrStaTrns }
[ 9767.042893] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9767.042910] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9767.042911] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9767.042915] ata6.00: status: { DRDY }
[ 9767.042923] ata6: hard resetting link
[ 9767.042926] ata6: nv: skipping hardreset on occupied port
[ 9767.508138] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9767.532258] ata6.00: configured for PIO0
[ 9767.532746] ata6: EH complete
[ 9821.028035] ata6: drained 65536 bytes to clear DRQ
[ 9821.058924] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[ 9821.058931] ata6: SError: { Handshk LinkSeq TrStaTrns }
[ 9821.058938] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9821.058960] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9821.058962] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9821.058966] ata6.00: status: { DRDY }
[ 9821.058975] ata6: hard resetting link
[ 9821.058978] ata6: nv: skipping hardreset on occupied port
[ 9821.524084] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9821.548287] ata6.00: configured for PIO0
[ 9821.548759] ata6: EH complete
[ 9869.028021] ata6: drained 65536 bytes to clear DRQ
[ 9869.052704] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 9869.052710] ata6: SError: { LinkSeq TrStaTrns }
[ 9869.052715] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9869.052758] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9869.052760] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9869.052763] ata6.00: status: { DRDY }
[ 9869.052768] ata6: hard resetting link
[ 9869.052770] ata6: nv: skipping hardreset on occupied port
[ 9869.520038] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9869.544141] ata6.00: configured for PIO0
[ 9874.544069] ata6.00: qc timeout (cmd 0xa0)
[ 9874.544076] ata6.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 9874.544083] ata6: hard resetting link
[ 9874.544086] ata6: nv: skipping hardreset on occupied port
[ 9875.012028] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9875.036161] ata6.00: configured for PIO0
[ 9875.036561] ata6: EH complete
[ 9911.084063] CPU0: Core temperature/speed normal
[ 9998.052100] ata6: drained 65536 bytes to clear DRQ
[ 9998.078976] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x6 frozen
[ 9998.078982] ata6: SError: { LinkSeq TrStaTrns }
[ 9998.078987] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 9998.079002] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 9998.079003] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 9998.079006] ata6.00: status: { DRDY }
[ 9998.079011] ata6: hard resetting link
[ 9998.079013] ata6: nv: skipping hardreset on occupied port
[ 9998.544088] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9998.568215] ata6.00: configured for PIO0
[ 9998.568639] ata6: EH complete
[10211.084229] CPU0: Core temperature/speed normal
[10511.150428] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5485408)
[10511.150916] CPU0: Core temperature/speed normal
[10529.060002] ata6: drained 65536 bytes to clear DRQ
[10529.084346] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[10529.084351] ata6: SError: { Handshk LinkSeq TrStaTrns }
[10529.084355] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[10529.084371] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[10529.084372] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[10529.084375] ata6.00: status: { DRDY }
[10529.084381] ata6: hard resetting link
[10529.084383] ata6: nv: skipping hardreset on occupied port
[10529.552025] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10529.576141] ata6.00: configured for PIO0
[10529.576752] ata6: EH complete
[10704.036002] ata6: drained 65536 bytes to clear DRQ
[10704.060142] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[10704.060148] ata6: SError: { Handshk LinkSeq TrStaTrns }
[10704.060153] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[10704.060168] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[10704.060169] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[10704.060173] ata6.00: status: { DRDY }
[10704.060179] ata6: hard resetting link
[10704.060181] ata6: nv: skipping hardreset on occupied port
[10704.528046] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10704.552148] ata6.00: configured for PIO0
[10704.552591] ata6: EH complete
[10811.159900] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5530698)
[10811.160387] CPU0: Core temperature/speed normal
[10840.036002] ata6: drained 65536 bytes to clear DRQ
[10840.060217] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x1c00000 action 0x6 frozen
[10840.060223] ata6: SError: { Handshk LinkSeq TrStaTrns }
[10840.060228] sr 5:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[10840.060243] ata6.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[10840.060244] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[10840.060247] ata6.00: status: { DRDY }
[10840.060253] ata6: hard resetting link
[10840.060255] ata6: nv: skipping hardreset on occupied port
[10840.528104] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10840.552261] ata6.00: configured for PIO0
[10840.552710] ata6: EH complete