dmesg - test1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdab1000 (usable)
[ 0.000000] BIOS-e820: 00000000bdab1000 - 00000000bdab7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdab7000 - 00000000bdbb5000 (usable)
[ 0.000000] BIOS-e820: 00000000bdbb5000 - 00000000bdc0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable)
[ 0.000000] BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdf0f000 - 00000000bdf18000 (usable)
[ 0.000000] BIOS-e820: 00000000bdf18000 - 00000000bdf1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdf1f000 - 00000000bdf55000 (usable)
[ 0.000000] BIOS-e820: 00000000bdf55000 - 00000000bdf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdf9f000 - 00000000bdfe4000 (usable)
[ 0.000000] BIOS-e820: 00000000bdfe4000 - 00000000bdffd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdffd000 - 00000000be000000 (usable)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: /KHLB2, BIOS 1.01 02/18/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 1, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] total RAM covered: 4096M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6b80] f6b80
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000be000000
[ 0.000000] 0000000000 - 00be000000 page 2M
[ 0.000000] kernel direct mapping tables up to be000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bdfde000-bdfe4000
[ 0.000000] RAMDISK: 35942000 - 36c99000
[ 0.000000] ACPI: RSDP 00000000000f6ad0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bdff7287 0007C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bdfe8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bdfe9000 05893 (v02 Intel CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000bdf8efc0 00040
[ 0.000000] ACPI: APIC 00000000bdffcd1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bdffcd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bdffcdbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIX 00000000bdffcdfa 00176 (v01 Compal JHL00_90 06040000 TBD 00000001)
[ 0.000000] ACPI: APIC 00000000bdffcf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bdffcfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: TCPA 00000000bdfef000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000bdfe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdfe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdfe5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bdab1
[ 0.000000] 0: 0x000bdab7 -> 0x000bdbb5
[ 0.000000] 0: 0x000bdc0f -> 0x000bdd08
[ 0.000000] 0: 0x000bdf0f -> 0x000bdf18
[ 0.000000] 0: 0x000bdf1f -> 0x000bdf55
[ 0.000000] 0: 0x000bdf9f -> 0x000bdfe4
[ 0.000000] 0: 0x000bdffd -> 0x000be000
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1039548
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 757103 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdab1000 - 00000000bdab7000
[ 0.000000] PM: Registered nosave memory: 00000000bdbb5000 - 00000000bdc0f000
[ 0.000000] PM: Registered nosave memory: 00000000bdd08000 - 00000000bdf0f000
[ 0.000000] PM: Registered nosave memory: 00000000bdf18000 - 00000000bdf1f000
[ 0.000000] PM: Registered nosave memory: 00000000bdf55000 - 00000000bdf9f000
[ 0.000000] PM: Registered nosave memory: 00000000bdfe4000 - 00000000bdffd000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:42000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u1048576
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019063
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3990744k/5242880k available (6566k kernel code, 1084688k absent, 167448k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 2527.001 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.00 BogoMIPS (lpj=10108004)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.008034] Security Framework initialized
[ 0.008051] AppArmor: AppArmor initialized
[ 0.008053] Yama: becoming mindful.
[ 0.008420] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013112] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014060] Mount-cache hash table entries: 256
[ 0.014203] Initializing cgroup subsys cpuacct
[ 0.014209] Initializing cgroup subsys memory
[ 0.014220] Initializing cgroup subsys devices
[ 0.014222] Initializing cgroup subsys freezer
[ 0.014224] Initializing cgroup subsys blkio
[ 0.014231] Initializing cgroup subsys perf_event
[ 0.014262] CPU: Physical Processor ID: 0
[ 0.014264] CPU: Processor Core ID: 0
[ 0.014266] mce: CPU supports 6 MCE banks
[ 0.014275] CPU0: Thermal monitoring enabled (TM2)
[ 0.014279] using mwait in idle threads.
[ 0.016735] ACPI: Core revision 20110623
[ 0.024019] ftrace: allocating 27049 entries in 107 pages
[ 0.028418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071128] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.072003] smpboot cpu 1: start_ip = 98000
[ 0.160037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160081] Brought up 2 CPUs
[ 0.160083] Total of 2 processors activated (10107.96 BogoMIPS).
[ 0.161848] devtmpfs: initialized
[ 0.161848] EVM: security.selinux
[ 0.161848] EVM: security.SMACK64
[ 0.161848] EVM: security.capability
[ 0.161848] PM: Registering ACPI NVS region at bdf55000 (303104 bytes)
[ 0.161848] print_constraints: dummy:
[ 0.161848] RTC time: 10:27:18, date: 05/16/12
[ 0.161848] NET: Registered protocol family 16
[ 0.161848] Trying to unpack rootfs image as initramfs...
[ 0.161848] ACPI: bus type pci registered
[ 0.161848] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161848] PCI: not using MMCONFIG
[ 0.161848] PCI: Using configuration type 1 for base access
[ 0.164829] bio: create slab at 0
[ 0.164902] ACPI: Added _OSI(Module Device)
[ 0.164904] ACPI: Added _OSI(Processor Device)
[ 0.164906] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164908] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.166025] ACPI: EC: Look up EC in DSDT
[ 0.168606] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.168916] ACPI: SSDT 00000000bdf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.169187] ACPI: Dynamic OEM Table Load:
[ 0.169189] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.169292] ACPI: SSDT 00000000bdf18620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.169547] ACPI: Dynamic OEM Table Load:
[ 0.169550] ACPI: SSDT (null) 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.228291] ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.228577] ACPI: Dynamic OEM Table Load:
[ 0.228580] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.236125] ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.236395] ACPI: Dynamic OEM Table Load:
[ 0.236398] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.244275] ACPI: Interpreter enabled
[ 0.244281] ACPI: (supports S0 S3 S4 S5)
[ 0.244299] ACPI: Using IOAPIC for interrupt routing
[ 0.244324] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.244915] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.345781] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.345902] ACPI: No dock devices found.
[ 0.345905] HEST: Table not found.
[ 0.345908] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.346035] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.346035] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.346035] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.346035] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.346035] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.346035] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.346035] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.346035] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.346035] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.346035] DMAR: Forcing write-buffer flush capability
[ 0.346035] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.346035] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 0.346035] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:01.0: PME# disabled
[ 0.346035] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.346035] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.346035] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.346035] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.346035] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.346035] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
[ 0.346035] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.346035] pci 0000:00:1a.7: reg 10: [mem 0xf2504800-0xf2504bff]
[ 0.346035] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1a.7: PME# disabled
[ 0.346035] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.346035] pci 0000:00:1b.0: reg 10: [mem 0xf2500000-0xf2503fff 64bit]
[ 0.346035] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1b.0: PME# disabled
[ 0.346035] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.346035] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1c.0: PME# disabled
[ 0.346035] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.346035] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1c.2: PME# disabled
[ 0.346035] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.346035] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1c.3: PME# disabled
[ 0.346035] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.346035] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.346035] pci 0000:00:1c.4: PME# disabled
[ 0.346035] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.346035] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.346082] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.348065] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.348129] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.348181] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.348256] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.348281] pci 0000:00:1d.7: reg 10: [mem 0xf2504c00-0xf2504fff]
[ 0.348392] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.348397] pci 0000:00:1d.7: PME# disabled
[ 0.348419] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.348498] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.348628] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.348651] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 0.348661] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 0.348670] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 0.348679] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 0.348688] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 0.348697] pci 0000:00:1f.2: reg 24: [mem 0xf2504000-0xf25047ff]
[ 0.348753] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.348757] pci 0000:00:1f.2: PME# disabled
[ 0.348777] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.348795] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.348822] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.348894] pci 0000:01:00.0: [1002:9480] type 0 class 0x000300
[ 0.348909] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.348920] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.348931] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[ 0.348969] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.349019] pci 0000:01:00.0: supports D1 D2
[ 0.349046] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.349061] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[ 0.349164] pci 0000:01:00.1: supports D1 D2
[ 0.349206] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.349209] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.349212] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.349216] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.349288] pci 0000:02:00.0: [197b:2382] type 0 class 0x000880
[ 0.349309] pci 0000:02:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
[ 0.349394] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.349508] pci 0000:02:00.2: [197b:2381] type 0 class 0x000805
[ 0.349529] pci 0000:02:00.2: reg 10: [mem 0xf2100400-0xf21004ff]
[ 0.349722] pci 0000:02:00.3: [197b:2383] type 0 class 0x000880
[ 0.349743] pci 0000:02:00.3: reg 10: [mem 0xf2100800-0xf21008ff]
[ 0.356047] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.356054] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.356141] pci 0000:0e:00.0: [8086:4232] type 0 class 0x000280
[ 0.356178] pci 0000:0e:00.0: reg 10: [mem 0xf2200000-0xf2201fff 64bit]
[ 0.356357] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[ 0.356364] pci 0000:0e:00.0: PME# disabled
[ 0.364045] pci 0000:00:1c.2: PCI bridge to [bus 0e-0e]
[ 0.364052] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.364129] pci 0000:14:00.0: [10ec:8168] type 0 class 0x000200
[ 0.364148] pci 0000:14:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.364181] pci 0000:14:00.0: reg 18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.364202] pci 0000:14:00.0: reg 20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.364216] pci 0000:14:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.364292] pci 0000:14:00.0: supports D1 D2
[ 0.364294] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364299] pci 0000:14:00.0: PME# disabled
[ 0.372044] pci 0000:00:1c.3: PCI bridge to [bus 14-14]
[ 0.372050] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.372059] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.372112] pci 0000:00:1c.4: PCI bridge to [bus 1a-1b]
[ 0.372117] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.372121] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.372128] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.372201] pci 0000:00:1e.0: PCI bridge to [bus 26-26] (subtractive decode)
[ 0.372213] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.372220] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.372222] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.372224] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.372227] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.372229] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.372231] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.372268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.372381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.372419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.372511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.372541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.372565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.372593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.372629] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.372633] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.372634] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.376818] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.376860] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.376900] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.376941] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.376983] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.377024] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.377063] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.377103] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.377224] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.377229] vgaarb: loaded
[ 0.377230] vgaarb: bridge control possible 0000:01:00.0
[ 0.377333] i2c-core: driver [aat2870] using legacy suspend method
[ 0.377335] i2c-core: driver [aat2870] using legacy resume method
[ 0.377399] SCSI subsystem initialized
[ 0.377459] libata version 3.00 loaded.
[ 0.377508] usbcore: registered new interface driver usbfs
[ 0.377518] usbcore: registered new interface driver hub
[ 0.377543] usbcore: registered new device driver usb
[ 0.377630] PCI: Using ACPI for IRQ routing
[ 0.385036] PCI: pci_cache_line_size set to 64 bytes
[ 0.385150] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 0.385153] reserve RAM buffer: 00000000bdab1000 - 00000000bfffffff
[ 0.385156] reserve RAM buffer: 00000000bdbb5000 - 00000000bfffffff
[ 0.385159] reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff
[ 0.385162] reserve RAM buffer: 00000000bdf18000 - 00000000bfffffff
[ 0.385164] reserve RAM buffer: 00000000bdf55000 - 00000000bfffffff
[ 0.385166] reserve RAM buffer: 00000000bdfe4000 - 00000000bfffffff
[ 0.385168] reserve RAM buffer: 00000000be000000 - 00000000bfffffff
[ 0.385282] NetLabel: Initializing
[ 0.385284] NetLabel: domain hash size = 128
[ 0.385285] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.385299] NetLabel: unlabeled traffic allowed by default
[ 0.385349] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.385354] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.385359] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.392067] Switching to clocksource hpet
[ 0.399456] AppArmor: AppArmor Filesystem Enabled
[ 0.399490] pnp: PnP ACPI init
[ 0.399510] ACPI: bus type pnp registered
[ 0.399768] pnp 00:00: [bus 00-ff]
[ 0.399770] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399772] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399774] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399776] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399778] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.399780] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.399782] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.399784] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.399786] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.399788] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.399790] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.399792] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.399794] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.399796] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.399798] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.399800] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.399801] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.399803] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.399805] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.399866] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.399921] pnp 00:01: [io 0xff2c-0xff2f]
[ 0.399933] pnp 00:01: [irq 4]
[ 0.399964] pnp 00:01: Plug and Play ACPI device, IDs ENE0100 (active)
[ 0.399983] pnp 00:02: [io 0x0000-0x001f]
[ 0.399985] pnp 00:02: [io 0x0081-0x0091]
[ 0.399987] pnp 00:02: [io 0x0093-0x009f]
[ 0.399988] pnp 00:02: [io 0x00c0-0x00df]
[ 0.399990] pnp 00:02: [dma 4]
[ 0.400049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.400110] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.400172] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.400176] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.400185] pnp 00:04: [io 0x00f0]
[ 0.400190] pnp 00:04: [irq 13]
[ 0.400219] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.400230] pnp 00:05: [io 0x002e-0x002f]
[ 0.400231] pnp 00:05: [io 0x004e-0x004f]
[ 0.400233] pnp 00:05: [io 0x0061]
[ 0.400235] pnp 00:05: [io 0x0063]
[ 0.400240] pnp 00:05: [io 0x0065]
[ 0.400241] pnp 00:05: [io 0x0067]
[ 0.400243] pnp 00:05: [io 0x0068]
[ 0.400244] pnp 00:05: [io 0x006c]
[ 0.400246] pnp 00:05: [io 0x0070]
[ 0.400247] pnp 00:05: [io 0x0080]
[ 0.400249] pnp 00:05: [io 0x0092]
[ 0.400251] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.400252] pnp 00:05: [io 0x0400-0x047f]
[ 0.400254] pnp 00:05: [io 0x0480-0x048f]
[ 0.400256] pnp 00:05: [io 0xffff]
[ 0.400257] pnp 00:05: [io 0xffff]
[ 0.400259] pnp 00:05: [io 0x1000-0x107f]
[ 0.400261] pnp 00:05: [io 0x1180-0x11ff]
[ 0.400262] pnp 00:05: [io 0xfe00]
[ 0.400319] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.400322] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.400324] system 00:05: [io 0xffff] has been reserved
[ 0.400327] system 00:05: [io 0xffff] has been reserved
[ 0.400329] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.400331] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.400334] system 00:05: [io 0xfe00] has been reserved
[ 0.400336] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400345] pnp 00:06: [io 0x0070-0x0077]
[ 0.400349] pnp 00:06: [irq 8]
[ 0.400376] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.420062] pnp 00:07: [io 0x0060]
[ 0.420065] pnp 00:07: [io 0x0064]
[ 0.420076] pnp 00:07: [irq 1]
[ 0.420145] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.420157] pnp 00:08: [irq 12]
[ 0.420189] pnp 00:08: Plug and Play ACPI device, IDs SYN070b SYN0700 SYN0002 PNP0f13 (active)
[ 0.420288] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.420290] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 0.420292] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.420294] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.420295] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.420297] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.420299] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[ 0.420301] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.420375] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.420378] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.420380] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.420383] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.420385] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.420387] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.420390] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.420392] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.420395] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420432] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.420467] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.420566] pnp: PnP ACPI: found 11 devices
[ 0.420568] ACPI: ACPI bus type pnp unregistered
[ 0.426783] PCI: max bus depth: 1 pci_try_num: 2
[ 0.426845] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.426848] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0100000-0xc01fffff]
[ 0.426852] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0200000-0xc02000ff 64bit]
[ 0.426859] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0200000-0xc02000ff 64bit] (PCI address [0xc0200000-0xc02000ff])
[ 0.426863] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0300000-0xc07fffff]
[ 0.426866] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.426870] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.426873] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0a00000-0xc0cfffff pref]
[ 0.426876] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.426880] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.426883] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.426886] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.426889] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.426892] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.426897] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0a00000-0xc0a0ffff pref]
[ 0.426900] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.426902] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.426907] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.426911] pci 0000:00:1c.0: bridge window [mem 0xc0a00000-0xc0cfffff pref]
[ 0.426918] pci 0000:00:1c.2: PCI bridge to [bus 0e-0e]
[ 0.426921] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.426926] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.426930] pci 0000:00:1c.2: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.426937] pci 0000:14:00.0: BAR 6: assigned [mem 0xf2020000-0xf202ffff pref]
[ 0.426939] pci 0000:00:1c.3: PCI bridge to [bus 14-14]
[ 0.426942] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.426947] pci 0000:00:1c.3: bridge window [mem 0xc0300000-0xc07fffff]
[ 0.426951] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.426957] pci 0000:00:1c.4: PCI bridge to [bus 1a-1b]
[ 0.426960] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.426965] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.426969] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.426976] pci 0000:00:1e.0: PCI bridge to [bus 26-26]
[ 0.427003] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.427008] pci 0000:00:01.0: setting latency timer to 64
[ 0.427018] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.427022] pci 0000:00:1c.0: setting latency timer to 64
[ 0.427031] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.427035] pci 0000:00:1c.2: setting latency timer to 64
[ 0.427048] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.427052] pci 0000:00:1c.3: setting latency timer to 64
[ 0.427059] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.427063] pci 0000:00:1c.4: setting latency timer to 64
[ 0.427071] pci 0000:00:1e.0: setting latency timer to 64
[ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.427077] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.427079] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.427081] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.427083] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.427085] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.427087] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.427089] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.427092] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.427095] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.427098] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.427101] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.427103] pci_bus 0000:02: resource 2 [mem 0xc0a00000-0xc0cfffff pref]
[ 0.427106] pci_bus 0000:0e: resource 0 [io 0x5000-0x5fff]
[ 0.427109] pci_bus 0000:0e: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.427112] pci_bus 0000:0e: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.427115] pci_bus 0000:14: resource 0 [io 0x3000-0x3fff]
[ 0.427118] pci_bus 0000:14: resource 1 [mem 0xc0300000-0xc07fffff]
[ 0.427120] pci_bus 0000:14: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.427123] pci_bus 0000:1a: resource 0 [io 0x4000-0x4fff]
[ 0.427126] pci_bus 0000:1a: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.427129] pci_bus 0000:1a: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.427132] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.427135] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.427137] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.427140] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.427143] pci_bus 0000:26: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.427146] pci_bus 0000:26: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.427148] pci_bus 0000:26: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.427187] NET: Registered protocol family 2
[ 0.427324] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.428353] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.432317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.432812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.432814] TCP reno registered
[ 0.432827] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.432862] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.432989] NET: Registered protocol family 1
[ 0.433020] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.433037] pci 0000:00:1a.0: PCI INT A disabled
[ 0.433060] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.433077] pci 0000:00:1a.1: PCI INT B disabled
[ 0.433085] pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.433102] pci 0000:00:1a.2: PCI INT C disabled
[ 0.433111] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.433146] pci 0000:00:1a.7: PCI INT C disabled
[ 0.433168] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.433185] pci 0000:00:1d.0: PCI INT A disabled
[ 0.433193] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.433210] pci 0000:00:1d.1: PCI INT B disabled
[ 0.433217] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.433234] pci 0000:00:1d.2: PCI INT C disabled
[ 0.433243] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.433266] pci 0000:00:1d.7: PCI INT A disabled
[ 0.433281] pci 0000:01:00.0: Boot video device
[ 0.433302] PCI: CLS 64 bytes, default 64
[ 0.433304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.433307] Placing 64MB software IO TLB between ffff8800b9ab1000 - ffff8800bdab1000
[ 0.433309] software IO TLB at phys 0xb9ab1000 - 0xbdab1000
[ 0.433318] Simple Boot Flag at 0x36 set to 0x1
[ 0.433663] audit: initializing netlink socket (disabled)
[ 0.433672] type=2000 audit(1337164037.428:1): initialized
[ 0.465505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.490741] VFS: Disk quotas dquot_6.5.2
[ 0.490797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.491253] fuse init (API version 7.17)
[ 0.491332] msgmni has been set to 7794
[ 0.491603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.491627] io scheduler noop registered
[ 0.491629] io scheduler deadline registered
[ 0.491662] io scheduler cfq registered (default)
[ 0.491770] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.491801] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.491848] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.491891] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.491958] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.492016] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.492080] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.492125] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.492192] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.492235] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.492319] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.492342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.492392] intel_idle: MWAIT substates: 0x3122220
[ 0.492394] intel_idle: does not run on family 6 model 23
[ 0.492631] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.492915] ACPI: AC Adapter [ACAD] (off-line)
[ 0.492991] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.493011] ACPI: Lid Switch [LID0]
[ 0.493052] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.493056] ACPI: Power Button [PWRB]
[ 0.493094] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.493097] ACPI: Power Button [PWRF]
[ 0.496161] Monitor-Mwait will be used to enter C-1 state
[ 0.504062] Monitor-Mwait will be used to enter C-2 state
[ 0.504093] Monitor-Mwait will be used to enter C-3 state
[ 0.504101] Marking TSC unstable due to TSC halts in idle
[ 0.504114] ACPI: acpi_idle registered with cpuidle
[ 0.510537] Freeing initrd memory: 19804k freed
[ 0.524488] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.524499] ACPI: Battery Slot [BAT1] (battery present)
[ 0.524527] ERST: Table is not found!
[ 0.524529] GHES: HEST is not enabled!
[ 0.544311] ACPI: Battery Slot [BAT1] (battery present)
[ 0.620356] Linux agpgart interface v0.103
[ 0.621866] brd: module loaded
[ 0.622600] loop: module loaded
[ 0.622726] ahci 0000:00:1f.2: version 3.0
[ 0.622740] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.622790] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.622839] ahci: SSS flag set, parallel bus scan disabled
[ 0.622868] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.622871] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 0.622876] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.644535] scsi0 : ahci
[ 0.644622] scsi1 : ahci
[ 0.644696] scsi2 : ahci
[ 0.644766] scsi3 : ahci
[ 0.644840] scsi4 : ahci
[ 0.644920] scsi5 : ahci
[ 0.644969] ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 45
[ 0.644973] ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 45
[ 0.644974] ata3: DUMMY
[ 0.644976] ata4: DUMMY
[ 0.644978] ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 45
[ 0.644981] ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 45
[ 0.645337] Fixed MDIO Bus: probed
[ 0.645355] tun: Universal TUN/TAP device driver, 1.6
[ 0.645357] tun: (C) 1999-2004 Max Krasnyansky
[ 0.645412] PPP generic driver version 2.4.2
[ 0.645521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.645538] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.645555] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.645558] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.645605] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.645636] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.649520] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.649534] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800
[ 0.664014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.664129] hub 1-0:1.0: USB hub found
[ 0.664133] hub 1-0:1.0: 6 ports detected
[ 0.664203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.664216] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.664219] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.664262] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.664288] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.668167] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.668179] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00
[ 0.684014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.684123] hub 2-0:1.0: USB hub found
[ 0.684126] hub 2-0:1.0: 6 ports detected
[ 0.684195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.684209] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.684223] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.684230] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.684233] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.684269] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.684302] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.684417] hub 3-0:1.0: USB hub found
[ 0.684421] hub 3-0:1.0: 2 ports detected
[ 0.684483] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.684490] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.684493] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.684534] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.684565] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.684675] hub 4-0:1.0: USB hub found
[ 0.684679] hub 4-0:1.0: 2 ports detected
[ 0.684740] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.684747] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.684750] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.684798] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.684820] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 0.684929] hub 5-0:1.0: USB hub found
[ 0.684932] hub 5-0:1.0: 2 ports detected
[ 0.684992] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.684998] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.685002] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.685041] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.685064] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.685175] hub 6-0:1.0: USB hub found
[ 0.685178] hub 6-0:1.0: 2 ports detected
[ 0.685237] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.685244] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.685247] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.685283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.685308] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 0.685418] hub 7-0:1.0: USB hub found
[ 0.685421] hub 7-0:1.0: 2 ports detected
[ 0.685480] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.685486] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.685490] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.685531] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.685563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.685674] hub 8-0:1.0: USB hub found
[ 0.685677] hub 8-0:1.0: 2 ports detected
[ 0.685785] usbcore: registered new interface driver libusual
[ 0.685820] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.716911] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.716917] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.717041] mousedev: PS/2 mouse device common for all mice
[ 0.717629] rtc_cmos 00:06: RTC can wake from S4
[ 0.717729] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.717754] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.717827] device-mapper: uevent: version 1.0.3
[ 0.717889] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.717953] cpuidle: using governor ladder
[ 0.718032] cpuidle: using governor menu
[ 0.718034] EFI Variables Facility v0.08 2004-May-17
[ 0.718243] TCP cubic registered
[ 0.718339] NET: Registered protocol family 10
[ 0.718750] NET: Registered protocol family 17
[ 0.718765] Registering the dns_resolver key type
[ 0.718929] PM: Hibernation image not present or could not be loaded.
[ 0.718941] registered taskstats version 1
[ 0.735818] Magic number: 12:181:477
[ 0.735927] rtc_cmos 00:06: setting system clock to 2012-05-16 10:27:18 UTC (1337164038)
[ 0.736354] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.736356] EDD information not available.
[ 0.745900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.964140] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.019057] ata1.00: ATA-8: WDC WD3200BEVT-11ZCT0, 11.01A11, max UDMA/133
[ 1.019061] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.021289] ata1.00: configured for UDMA/133
[ 1.021454] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-1 11.0 PQ: 0 ANSI: 5
[ 1.021585] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.021588] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.021630] sd 0:0:0:0: [sda] Write Protect is off
[ 1.021633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.021681] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.061174] sda: sda1 sda2 < sda5 >
[ 1.061804] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.088098] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 1.332092] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[ 1.340059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.341828] ata2.00: ATAPI: Optiarc DVD RW AD-7700S, 1.02, max UDMA/100
[ 1.348497] ata2.00: configured for UDMA/100
[ 1.364409] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700S 1.02 PQ: 0 ANSI: 5
[ 1.380926] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.380931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.381102] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.381200] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.700103] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.748135] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.020137] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.021705] Freeing unused kernel memory: 920k freed
[ 2.021923] Write protecting the kernel read-only data: 12288k
[ 2.026665] Freeing unused kernel memory: 1608k freed
[ 2.030545] Freeing unused kernel memory: 1196k freed
[ 2.045814] udevd[105]: starting version 175
[ 2.093741] sdhci: Secure Digital Host Controller Interface driver
[ 2.093744] sdhci: Copyright(c) Pierre Ossman
[ 2.094011] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 2.094033] sdhci-pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.094081] sdhci-pci 0000:02:00.0: setting latency timer to 64
[ 2.094095] mmc0: no vmmc regulator found
[ 2.094126] Registered led device: mmc0::
[ 2.095921] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[ 2.095948] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 2.095967] sdhci-pci 0000:02:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.095977] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 2.095984] sdhci-pci 0000:02:00.2: PCI INT A disabled
[ 2.111999] acpi device:02: registered as cooling_device2
[ 2.112092] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 2.112136] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 2.114129] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.114150] r8169 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.114181] r8169 0000:14:00.0: setting latency timer to 64
[ 2.114241] r8169 0000:14:00.0: irq 46 for MSI/MSI-X
[ 2.114614] r8169 0000:14:00.0: eth0: RTL8168c/8111c at 0xffffc90000652000, 00:26:22:70:e1:35, XID 1c4000c0 IRQ 46
[ 2.114617] r8169 0000:14:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 3.390283] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.390285] vesafb: scrolling: redraw
[ 3.390288] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.392674] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
[ 3.392815] Console: switching to colour frame buffer device 128x48
[ 3.392832] fb0: VESA VGA frame buffer device
[ 8.627121] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.206139] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.224475] udevd[360]: starting version 175
[ 22.295808] lp: driver loaded but no devices found
[ 22.299414] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[ 22.299417] ene_ir: PLL freq = 1406
[ 22.299419] ene_ir: KB3926D or higher detected
[ 22.299431] ene_ir: Firmware regs: 00 00
[ 22.299433] ene_ir: Hardware features:
[ 22.299435] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 22.302306] IR NEC protocol handler initialized
[ 22.316288] IR RC5(x) protocol handler initialized
[ 22.320470] IR RC6 protocol handler initialized
[ 22.327436] IR JVC protocol handler initialized
[ 22.329149] Registered IR keymap rc-rc6-mce
[ 22.329300] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input5
[ 22.329406] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 22.333093] IR Sony protocol handler initialized
[ 22.338860] IR MCE Keyboard/mouse protocol handler initialized
[ 22.339922] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input6
[ 22.341469] ene_ir: driver has been successfully loaded
[ 22.342967] lirc_dev: IR Remote Control driver registered, major 251
[ 22.345734] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 22.345738] IR LIRC bridge handler initialized
[ 22.370187] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 22.392269] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 22.392274] Disabling lock debugging due to kernel taint
[ 22.394546] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.490538] cfg80211: Calling CRDA to update world regulatory domain
[ 22.491359] Bluetooth: Core ver 2.16
[ 22.492647] NET: Registered protocol family 31
[ 22.492650] Bluetooth: HCI device and connection manager initialized
[ 22.492653] Bluetooth: HCI socket layer initialized
[ 22.492655] Bluetooth: L2CAP socket layer initialized
[ 22.492662] Bluetooth: SCO socket layer initialized
[ 22.493703] jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.493711] jmb38x_ms 0000:02:00.3: setting latency timer to 64
[ 22.497166] type=1400 audit(1337164060.259:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
[ 22.497510] type=1400 audit(1337164060.259:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[ 22.497707] type=1400 audit(1337164060.259:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[ 22.518535] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes.
[ 22.518960] [fglrx] vendor: 1002 device: 9480 count: 1
[ 22.521381] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 22.521398] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.521405] pci 0000:01:00.0: setting latency timer to 64
[ 22.521662] [fglrx] Kernel PAT support is enabled
[ 22.521681] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 22.552759] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 22.584555] usbcore: registered new interface driver btusb
[ 22.589414] Linux video capture interface: v2.00
[ 22.589983] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a115)
[ 22.591355] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 22.591358] Copyright(c) 2003-2011 Intel Corporation
[ 22.591412] iwlwifi 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 22.591421] iwlwifi 0000:0e:00.0: setting latency timer to 64
[ 22.591446] iwlwifi 0000:0e:00.0: pci_resource_len = 0x00002000
[ 22.591448] iwlwifi 0000:0e:00.0: pci_resource_base = ffffc90000654000
[ 22.591450] iwlwifi 0000:0e:00.0: HW Revision ID = 0x0
[ 22.594239] iwlwifi 0000:0e:00.0: irq 47 for MSI/MSI-X
[ 22.594282] iwlwifi 0000:0e:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 22.594338] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
[ 22.612739] iwlwifi 0000:0e:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 22.612742] iwlwifi 0000:0e:00.0: Device SKU: 0Xf0
[ 22.617873] iwlwifi 0000:0e:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 22.620917] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to disable radio.
[ 22.648473] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input7
[ 22.648577] usbcore: registered new interface driver uvcvideo
[ 22.648580] USB Video Class driver (1.1.1)
[ 22.688381] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.688441] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 22.688467] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 22.759734] init: failsafe main process (778) killed by TERM signal
[ 22.794812] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 22.795976] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 22.797903] cfg80211: World regulatory domain updated:
[ 22.797906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.797909] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.797912] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.797914] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.797916] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.797919] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.799590] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 22.799691] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 22.799721] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 22.817494] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 22.817586] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 22.827474] ppdev: user-space parallel port driver
[ 22.864653] iwlwifi 0000:0e:00.0: loaded firmware version 8.83.5.1 build 33692
[ 22.864854] Registered led device: phy0-led
[ 22.864885] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 22.867670] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.000573] type=1400 audit(1337164060.763:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=922 comm="apparmor_parser"
[ 23.001003] type=1400 audit(1337164060.763:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=922 comm="apparmor_parser"
[ 23.005613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.005616] Bluetooth: BNEP filters: protocol multicast
[ 23.019404] Bluetooth: RFCOMM TTY layer initialized
[ 23.019410] Bluetooth: RFCOMM socket layer initialized
[ 23.019411] Bluetooth: RFCOMM ver 1.11
[ 23.048087] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 23.055221] type=1400 audit(1337164060.815:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=963 comm="apparmor_parser"
[ 23.066660] type=1400 audit(1337164060.827:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=962 comm="apparmor_parser"
[ 23.069536] type=1400 audit(1337164060.831:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=963 comm="apparmor_parser"
[ 23.069744] type=1400 audit(1337164060.831:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=963 comm="apparmor_parser"
[ 23.075332] type=1400 audit(1337164060.835:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=970 comm="apparmor_parser"
[ 23.460972] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.466260] r8169 0000:14:00.0: eth0: link down
[ 23.466641] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.466859] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.723133] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
[ 23.812172] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 24.219540] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 24.221317] [fglrx] Firegl kernel thread PID: 1180
[ 24.224524] [fglrx] Firegl kernel thread PID: 1183
[ 24.227119] [fglrx] Firegl kernel thread PID: 1184
[ 24.227281] [fglrx] IRQ 50 Enabled
[ 25.361549] Adding 4157436k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4157436k
[ 25.672943] init: plymouth main process (251) killed by SEGV signal
[ 25.677015] init: plymouth-upstart-bridge main process (870) killed by TERM signal
[ 25.695157] [fglrx] Gart USWC size:1224 M.
[ 25.695160] [fglrx] Gart cacheable size:486 M.
[ 25.695165] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 25.695167] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000
[ 25.695169] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 37.950889] Valid eCryptfs headers not found in file header region or xattr region, inode 12059787
[ 37.950894] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[ 40.199482] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 44.632766] input: setzensechss Maus as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/bluetooth/hci0/hci0:39/input12
[ 44.633506] generic-bluetooth 0005:05AC:030C.0001: input,hidraw0: BLUETOOTH HID v2.00 Mouse [setzensechss Maus] on 00:1B:DC:0F:7C:AC
[ 45.932139] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
[ 45.933061] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
[ 45.936006] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
[ 45.936017] atkbd serio0: Use 'setkeycodes e071 ' to make it known.
[ 45.936059] iwlwifi 0000:0e:00.0: Radio type=0x1-0x2-0x0
[ 45.942811] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
[ 45.942817] atkbd serio0: Use 'setkeycodes e071 ' to make it known.
[ 46.048805] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
[ 46.051739] iwlwifi 0000:0e:00.0: Radio type=0x1-0x2-0x0
[ 46.097405] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.624353] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 53.766944] wlan0: authenticate with 84:a8:e4:d7:87:b2 (try 1)
[ 53.771229] wlan0: authenticated
[ 53.775445] wlan0: associate with 84:a8:e4:d7:87:b2 (try 1)
[ 53.780689] wlan0: RX AssocResp from 84:a8:e4:d7:87:b2 (capab=0x411 status=0 aid=4)
[ 53.780693] wlan0: associated
[ 53.787971] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 57.825959] init: anacron main process (1097) killed by TERM signal
[ 84.960316] ptrace of non-child pid 2829 was attempted by: wineserver (pid 2819)
[ 86.690131] iwlwifi 0000:0e:00.0: Tx aggregation enabled on ra = 84:a8:e4:d7:87:b2 tid = 0
[ 134.361404] ptrace of non-child pid 3011 was attempted by: wineserver (pid 3001)
[ 627.821655] ptrace of non-child pid 5076 was attempted by: wineserver (pid 4189)
[ 693.774710] ptrace of non-child pid 4230 was attempted by: wineserver (pid 4189)
[ 1793.470044] iwlwifi 0000:0e:00.0: Tx aggregation enabled on ra = 84:a8:e4:d7:87:b2 tid = 6