dmesg - haeh
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-19-generic (buildd@yellow) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #33-Ubuntu SMP Thu Apr 19 19:05:14 UTC 2012 (Ubuntu 3.0.0-19.33-generic 3.0.27)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000096e3f000 (usable)
[ 0.000000] BIOS-e820: 0000000096e3f000 - 0000000096ebf000 (reserved)
[ 0.000000] BIOS-e820: 0000000096ebf000 - 0000000096fbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000096fbf000 - 0000000096fff000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000096fff000 - 0000000097000000 (usable)
[ 0.000000] BIOS-e820: 0000000097000000 - 000000009fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Acer Aspire 5750G/JE50_HR, BIOS V1.05 02/11/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 097000000 mask FFF000000 uncachable
[ 0.000000] 3 base 098000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 140000000 mask FF0000000 write-back
[ 0.000000] 7 base 150000000 mask FF0000000 write-back
[ 0.000000] 8 base 15FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x97000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000097000000
[ 0.000000] 0000000000 - 0097000000 page 2M
[ 0.000000] kernel direct mapping tables up to 97000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000015fe00000
[ 0.000000] 0100000000 - 015fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 15fe00000 @ 96e38000-96e3f000
[ 0.000000] RAMDISK: 365be000 - 372d7000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0000000096ffe120 00084 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0000000096ffc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0000000096ff0000 08E54 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0000000096f6d000 00040
[ 0.000000] ACPI: ASF! 0000000096ffd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0000000096ffb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0000000096ffa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0000000096ff9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0000000096fef000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0000000096fee000 00BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0000000096fec000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0000000096fe9000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0000000096fe8000 00780 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0000000096fe7000 00996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0000000096fe2000 04F58 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000015fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000015fe00000
[ 0.000000] NODE_DATA [000000015fdfb000 - 000000015fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015b600000-ffff88015edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0015fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00096e3f
[ 0.000000] 0: 0x00096fff -> 0x00097000
[ 0.000000] 0: 0x00100000 -> 0x0015fe00
[ 0.000000] On node 0 totalpages: 1010637
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 599672 pages, LIFO batch:31
[ 0.000000] Normal zone: 5369 pages used for memmap
[ 0.000000] Normal zone: 387335 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000096e3f000 - 0000000096ebf000
[ 0.000000] PM: Registered nosave memory: 0000000096ebf000 - 0000000096fbf000
[ 0.000000] PM: Registered nosave memory: 0000000096fbf000 - 0000000096fff000
[ 0.000000] PM: Registered nosave memory: 0000000097000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88015fa00000 s79616 r8192 d22784 u262144
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 990927
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3889296k/5765120k available (6145k kernel code, 1722572k absent, 153252k reserved, 6890k data, 988k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2294.982 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.96 BogoMIPS (lpj=9179928)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000040] AppArmor: AppArmor initialized
[ 0.000041] Yama: becoming mindful.
[ 0.000441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001357] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001718] Mount-cache hash table entries: 256
[ 0.001818] Initializing cgroup subsys cpuacct
[ 0.001823] Initializing cgroup subsys memory
[ 0.001829] Initializing cgroup subsys devices
[ 0.001831] Initializing cgroup subsys freezer
[ 0.001832] Initializing cgroup subsys net_cls
[ 0.001834] Initializing cgroup subsys blkio
[ 0.001839] Initializing cgroup subsys perf_event
[ 0.001863] CPU: Physical Processor ID: 0
[ 0.001865] CPU: Processor Core ID: 0
[ 0.001869] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001870] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001873] mce: CPU supports 7 MCE banks
[ 0.001885] CPU0: Thermal monitoring enabled (TM1)
[ 0.001891] using mwait in idle threads.
[ 0.004340] ACPI: Core revision 20110413
[ 0.035923] ftrace: allocating 25762 entries in 102 pages
[ 0.045765] x2apic not enabled, IRQ remapping init failed
[ 0.046194] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085861] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[ 0.191033] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.191039] ... version: 3
[ 0.191040] ... bit width: 48
[ 0.191042] ... generic registers: 4
[ 0.191043] ... value mask: 0000ffffffffffff
[ 0.191044] ... max period: 000000007fffffff
[ 0.191046] ... fixed-purpose events: 3
[ 0.191047] ... event mask: 000000070000000f
[ 0.191432] Booting Node 0, Processors #1
[ 0.191434] smpboot cpu 1: start_ip = 98000
[ 0.299140] #2
[ 0.299143] smpboot cpu 2: start_ip = 98000
[ 0.407031] #3
[ 0.407033] smpboot cpu 3: start_ip = 98000
[ 0.514961] Brought up 4 CPUs
[ 0.514964] Total of 4 processors activated (18358.04 BogoMIPS).
[ 0.517561] devtmpfs: initialized
[ 0.517677] PM: Registering ACPI NVS region at 96ebf000 (1048576 bytes)
[ 0.518933] print_constraints: dummy:
[ 0.518968] Time: 14:09:53 Date: 05/14/12
[ 0.518996] NET: Registered protocol family 16
[ 0.519079] Trying to unpack rootfs image as initramfs...
[ 0.519086] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.519088] ACPI: bus type pci registered
[ 0.519149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.519151] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.559716] PCI: Using configuration type 1 for base access
[ 0.560354] bio: create slab at 0
[ 0.562003] ACPI: EC: Look up EC in DSDT
[ 0.563539] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.618887] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.619771] ACPI: SSDT 0000000096e70718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.620167] ACPI: Dynamic OEM Table Load:
[ 0.620170] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.643030] ACPI: SSDT 0000000096e71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.643456] ACPI: Dynamic OEM Table Load:
[ 0.643458] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.662885] ACPI: SSDT 0000000096e6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.663277] ACPI: Dynamic OEM Table Load:
[ 0.663279] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.730775] ACPI: Interpreter enabled
[ 0.730779] ACPI: (supports S0 S3 S4 S5)
[ 0.730805] ACPI: Using IOAPIC for interrupt routing
[ 0.746537] Freeing initrd memory: 13412k freed
[ 1.133578] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.133739] ACPI: No dock devices found.
[ 1.133741] HEST: Table not found.
[ 1.133743] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.134024] _OSC request data:1 8 1f
[ 1.134028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.134494] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.134496] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.134502] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.134505] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 1.134517] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.134553] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.134585] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.134588] pci 0000:00:01.0: PME# disabled
[ 1.134612] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 1.134623] pci 0000:00:02.0: reg 10: [mem 0xd1400000-0xd17fffff 64bit]
[ 1.134629] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.134634] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 1.134707] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.134741] pci 0000:00:16.0: reg 10: [mem 0xd1b04000-0xd1b0400f 64bit]
[ 1.134857] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.134862] pci 0000:00:16.0: PME# disabled
[ 1.134911] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.135297] pci 0000:00:1a.0: reg 10: [mem 0xd1b0a000-0xd1b0a3ff]
[ 1.137485] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.137490] pci 0000:00:1a.0: PME# disabled
[ 1.137526] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.137551] pci 0000:00:1b.0: reg 10: [mem 0xd1b00000-0xd1b03fff 64bit]
[ 1.137673] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.137678] pci 0000:00:1b.0: PME# disabled
[ 1.137708] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.137838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.137843] pci 0000:00:1c.0: PME# disabled
[ 1.137878] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.138008] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.138013] pci 0000:00:1c.1: PME# disabled
[ 1.138047] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.138177] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.138182] pci 0000:00:1c.3: PME# disabled
[ 1.138229] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.138603] pci 0000:00:1d.0: reg 10: [mem 0xd1b09000-0xd1b093ff]
[ 1.140794] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.140799] pci 0000:00:1d.0: PME# disabled
[ 1.140831] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[ 1.141009] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 1.141043] pci 0000:00:1f.2: reg 10: [io 0x3098-0x309f]
[ 1.141055] pci 0000:00:1f.2: reg 14: [io 0x30bc-0x30bf]
[ 1.141069] pci 0000:00:1f.2: reg 18: [io 0x3090-0x3097]
[ 1.141082] pci 0000:00:1f.2: reg 1c: [io 0x30b8-0x30bb]
[ 1.141095] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 1.141109] pci 0000:00:1f.2: reg 24: [mem 0xd1b08000-0xd1b087ff]
[ 1.141195] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.141200] pci 0000:00:1f.2: PME# disabled
[ 1.141226] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.141251] pci 0000:00:1f.3: reg 10: [mem 0xd1b06000-0xd1b060ff 64bit]
[ 1.141288] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f]
[ 1.141368] pci 0000:01:00.0: [10de:1050] type 0 class 0x000300
[ 1.141381] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
[ 1.141396] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.141411] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.141421] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 1.141431] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 1.146518] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.146525] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.146533] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
[ 1.146543] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.146715] pci 0000:02:00.0: [14e4:16b5] type 0 class 0x000200
[ 1.146752] pci 0000:02:00.0: reg 10: [mem 0xd1830000-0xd183ffff 64bit pref]
[ 1.146781] pci 0000:02:00.0: reg 18: [mem 0xd1840000-0xd184ffff 64bit pref]
[ 1.146834] pci 0000:02:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[ 1.146937] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.146944] pci 0000:02:00.0: PME# disabled
[ 1.147020] pci 0000:02:00.1: [14e4:16bc] type 0 class 0x000805
[ 1.147056] pci 0000:02:00.1: reg 10: [mem 0xd1800000-0xd180ffff 64bit pref]
[ 1.147232] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 1.147239] pci 0000:02:00.1: PME# disabled
[ 1.147295] pci 0000:02:00.2: [14e4:16be] type 0 class 0x000880
[ 1.147331] pci 0000:02:00.2: reg 10: [mem 0xd1810000-0xd181ffff 64bit pref]
[ 1.147507] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 1.147514] pci 0000:02:00.2: PME# disabled
[ 1.147571] pci 0000:02:00.3: [14e4:16bf] type 0 class 0x000880
[ 1.147607] pci 0000:02:00.3: reg 10: [mem 0xd1820000-0xd182ffff 64bit pref]
[ 1.147783] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 1.147789] pci 0000:02:00.3: PME# disabled
[ 1.154584] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.154596] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.154608] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.154630] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.154730] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
[ 1.154764] pci 0000:03:00.0: reg 10: [mem 0xd1a00000-0xd1a0ffff 64bit]
[ 1.154931] pci 0000:03:00.0: supports D1
[ 1.154933] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 1.154939] pci 0000:03:00.0: PME# disabled
[ 1.162510] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.162519] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 1.162530] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
[ 1.162544] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.162700] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 1.162762] pci 0000:05:00.0: reg 10: [mem 0xd1900000-0xd1901fff 64bit]
[ 1.163090] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 1.163101] pci 0000:05:00.0: PME# disabled
[ 1.170518] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.170527] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 1.170537] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff]
[ 1.170551] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.170597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.170724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.170752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.170779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.170820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.170883] _OSC request data:1 1f 1f
[ 1.170886] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.170915] _OSC request data:1 0 1d
[ 1.170918] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.170920] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.173686] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.173730] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.173771] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.173813] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.173853] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.173894] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.173934] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.173973] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.174054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.174062] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.174065] vgaarb: loaded
[ 1.174066] vgaarb: bridge control possible 0000:01:00.0
[ 1.174067] vgaarb: bridge control possible 0000:00:02.0
[ 1.174198] SCSI subsystem initialized
[ 1.174244] libata version 3.00 loaded.
[ 1.174275] usbcore: registered new interface driver usbfs
[ 1.174282] usbcore: registered new interface driver hub
[ 1.174302] usbcore: registered new device driver usb
[ 1.174365] PCI: Using ACPI for IRQ routing
[ 1.187772] PCI: pci_cache_line_size set to 64 bytes
[ 1.187941] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 1.187943] reserve RAM buffer: 0000000096e3f000 - 0000000097ffffff
[ 1.187945] reserve RAM buffer: 0000000097000000 - 0000000097ffffff
[ 1.187947] reserve RAM buffer: 000000015fe00000 - 000000015fffffff
[ 1.188019] NetLabel: Initializing
[ 1.188021] NetLabel: domain hash size = 128
[ 1.188022] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.188032] NetLabel: unlabeled traffic allowed by default
[ 1.188068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.188074] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.191091] Switching to clocksource hpet
[ 1.194479] Switched to NOHz mode on CPU #0
[ 1.194531] Switched to NOHz mode on CPU #2
[ 1.194578] Switched to NOHz mode on CPU #1
[ 1.194582] Switched to NOHz mode on CPU #3
[ 1.195736] AppArmor: AppArmor Filesystem Enabled
[ 1.195757] pnp: PnP ACPI init
[ 1.195768] ACPI: bus type pnp registered
[ 1.196039] pnp 00:00: [bus 00-fe]
[ 1.196041] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.196043] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.196045] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.196047] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.196049] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.196050] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.196052] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.196054] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.196056] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.196058] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.196059] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.196061] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.196063] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.196065] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.196066] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.196068] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.196070] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.196072] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 1.196131] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.196143] pnp 00:01: [io 0x0000-0x001f]
[ 1.196144] pnp 00:01: [io 0x0081-0x0091]
[ 1.196146] pnp 00:01: [io 0x0093-0x009f]
[ 1.196147] pnp 00:01: [io 0x00c0-0x00df]
[ 1.196149] pnp 00:01: [dma 4]
[ 1.196168] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.196175] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.196189] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.196256] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.196272] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.196280] pnp 00:04: [io 0x00f0]
[ 1.196289] pnp 00:04: [irq 13]
[ 1.196306] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.196316] pnp 00:05: [io 0x002e-0x002f]
[ 1.196317] pnp 00:05: [io 0x004e-0x004f]
[ 1.196319] pnp 00:05: [io 0x0061]
[ 1.196320] pnp 00:05: [io 0x0063]
[ 1.196321] pnp 00:05: [io 0x0065]
[ 1.196323] pnp 00:05: [io 0x0067]
[ 1.196324] pnp 00:05: [io 0x0068]
[ 1.196326] pnp 00:05: [io 0x006c]
[ 1.196327] pnp 00:05: [io 0x0070]
[ 1.196328] pnp 00:05: [io 0x0080]
[ 1.196330] pnp 00:05: [io 0x0092]
[ 1.196331] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.196334] pnp 00:05: [io 0x0680-0x069f]
[ 1.196335] pnp 00:05: [io 0xff2c-0xff2f]
[ 1.196337] pnp 00:05: [io 0x1000-0x100f]
[ 1.196338] pnp 00:05: [io 0xffff]
[ 1.196340] pnp 00:05: [io 0xffff]
[ 1.196341] pnp 00:05: [io 0x0400-0x047f]
[ 1.196343] pnp 00:05: [io 0x0500-0x057f]
[ 1.196344] pnp 00:05: [io 0x164e-0x164f]
[ 1.196383] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.196385] system 00:05: [io 0xff2c-0xff2f] has been reserved
[ 1.196387] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.196389] system 00:05: [io 0xffff] has been reserved
[ 1.196391] system 00:05: [io 0xffff] has been reserved
[ 1.196393] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.196395] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.196397] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.196400] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.196407] pnp 00:06: [io 0x0070-0x0077]
[ 1.196412] pnp 00:06: [irq 8]
[ 1.196427] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.196447] pnp 00:07: [io 0x0454-0x0457]
[ 1.196475] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.196478] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.196493] pnp 00:08: [io 0x0060]
[ 1.196494] pnp 00:08: [io 0x0064]
[ 1.196499] pnp 00:08: [irq 1]
[ 1.196515] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.196551] pnp 00:09: [irq 12]
[ 1.196572] pnp 00:09: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[ 1.395121] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.395123] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.395125] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.395127] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.395128] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.395130] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.395131] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.395133] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.395135] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.395136] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 1.395173] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.395175] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.395177] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.395179] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.395181] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.395184] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.395188] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.395191] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.395193] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.395195] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 1.395198] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.395380] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 1.395382] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 1.395427] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.395429] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
[ 1.395431] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.395448] pnp: PnP ACPI: found 12 devices
[ 1.395449] ACPI: ACPI bus type pnp unregistered
[ 1.400934] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 1.400937] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[ 1.400942] PCI: max bus depth: 1 pci_try_num: 2
[ 1.400985] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
[ 1.400988] pci 0000:01:00.0: BAR 6: assigned [mem 0xd1000000-0xd107ffff pref]
[ 1.400991] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.400993] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 1.400996] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
[ 1.400999] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.401004] pci 0000:02:00.0: BAR 6: assigned [mem 0xd1850000-0xd18507ff pref]
[ 1.401006] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.401007] pci 0000:00:1c.0: bridge window [io disabled]
[ 1.401014] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
[ 1.401019] pci 0000:00:1c.0: bridge window [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.401028] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.401030] pci 0000:00:1c.1: bridge window [io disabled]
[ 1.401036] pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
[ 1.401041] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 1.401050] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.401051] pci 0000:00:1c.3: bridge window [io disabled]
[ 1.401058] pci 0000:00:1c.3: bridge window [mem 0xd1900000-0xd19fffff]
[ 1.401063] pci 0000:00:1c.3: bridge window [mem pref disabled]
[ 1.401082] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.401085] pci 0000:00:01.0: setting latency timer to 64
[ 1.401095] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.401100] pci 0000:00:1c.0: setting latency timer to 64
[ 1.401107] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.401112] pci 0000:00:1c.1: setting latency timer to 64
[ 1.401123] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.401128] pci 0000:00:1c.3: setting latency timer to 64
[ 1.401132] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.401134] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.401136] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.401138] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 1.401140] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.401142] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
[ 1.401144] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.401146] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff]
[ 1.401148] pci_bus 0000:02: resource 2 [mem 0xd1800000-0xd18fffff 64bit pref]
[ 1.401150] pci_bus 0000:03: resource 1 [mem 0xd1a00000-0xd1afffff]
[ 1.401152] pci_bus 0000:05: resource 1 [mem 0xd1900000-0xd19fffff]
[ 1.401178] NET: Registered protocol family 2
[ 1.401311] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.402159] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.403475] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.403612] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.403614] TCP reno registered
[ 1.403623] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.403642] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.403732] NET: Registered protocol family 1
[ 1.403746] pci 0000:00:02.0: Boot video device
[ 1.403761] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.418976] pci 0000:00:1a.0: PCI INT A disabled
[ 1.419027] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.434955] pci 0000:00:1d.0: PCI INT A disabled
[ 1.435114] pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.446355] pci 0000:05:00.0: PCI INT A disabled
[ 1.446361] PCI: CLS 64 bytes, default 64
[ 1.446362] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.446364] Placing 64MB software IO TLB between ffff880092e38000 - ffff880096e38000
[ 1.446366] software IO TLB at phys 0x92e38000 - 0x96e38000
[ 1.446383] Simple Boot Flag at 0x44 set to 0x1
[ 1.446761] audit: initializing netlink socket (disabled)
[ 1.446771] type=2000 audit(1337004594.264:1): initialized
[ 1.470310] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.479335] VFS: Disk quotas dquot_6.5.2
[ 1.479383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.479844] fuse init (API version 7.16)
[ 1.479909] msgmni has been set to 7622
[ 1.480278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.480313] io scheduler noop registered
[ 1.480315] io scheduler deadline registered
[ 1.480344] io scheduler cfq registered (default)
[ 1.480421] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.480447] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.480693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.480725] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.480753] intel_idle: MWAIT substates: 0x21120
[ 1.480755] intel_idle: v0.4 model 0x2A
[ 1.480756] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.678838] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.878739] ACPI: AC Adapter [ACAD] (off-line)
[ 1.878865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[ 1.878870] ACPI: Power Button [PWRB]
[ 1.878902] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[ 1.878920] ACPI: Lid Switch [LID0]
[ 1.878946] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 1.878950] ACPI: Sleep Button [SLPB]
[ 1.878979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.878982] ACPI: Power Button [PWRF]
[ 1.879004] ACPI: acpi_idle yielding to intel_idle
[ 2.079530] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.079548] ERST: Table is not found!
[ 2.138880] Linux agpgart interface v0.103
[ 2.138949] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.139047] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.140092] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 2.140181] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 2.140936] brd: module loaded
[ 2.141278] loop: module loaded
[ 2.141578] Fixed MDIO Bus: probed
[ 2.141593] PPP generic driver version 2.4.2
[ 2.141618] tun: Universal TUN/TAP device driver, 1.6
[ 2.141620] tun: (C) 1999-2004 Max Krasnyansky
[ 2.141672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.141689] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.141707] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.141711] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.141734] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.141761] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.145634] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.145650] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd1b0a000
[ 2.158571] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.158731] hub 1-0:1.0: USB hub found
[ 2.158734] hub 1-0:1.0: 2 ports detected
[ 2.158782] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.158796] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.158800] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.158825] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.158851] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.162744] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.162758] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd1b09000
[ 2.178585] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.178730] hub 2-0:1.0: USB hub found
[ 2.178733] hub 2-0:1.0: 2 ports detected
[ 2.178779] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.178788] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.178835] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 2.214279] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.214285] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.214371] mousedev: PS/2 mouse device common for all mice
[ 2.217516] rtc_cmos 00:06: RTC can wake from S4
[ 2.217627] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.217661] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.217735] device-mapper: uevent: version 1.0.3
[ 2.217787] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.217874] cpuidle: using governor ladder
[ 2.218012] cpuidle: using governor menu
[ 2.218014] EFI Variables Facility v0.08 2004-May-17
[ 2.218174] TCP cubic registered
[ 2.218262] NET: Registered protocol family 10
[ 2.218588] NET: Registered protocol family 17
[ 2.218600] Registering the dns_resolver key type
[ 2.218665] PM: Hibernation image not present or could not be loaded.
[ 2.218674] registered taskstats version 1
[ 2.228507] Magic number: 12:146:182
[ 2.228537] acpi device:41: hash matches
[ 2.228601] rtc_cmos 00:06: setting system clock to 2012-05-14 14:09:55 UTC (1337004595)
[ 2.229158] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.229159] EDD information not available.
[ 2.230322] Freeing unused kernel memory: 988k freed
[ 2.230427] Write protecting the kernel read-only data: 12288k
[ 2.234942] Freeing unused kernel memory: 2028k freed
[ 2.238109] Freeing unused kernel memory: 1388k freed
[ 2.249430] udevd[88]: starting version 173
[ 2.253157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.442505] Refined TSC clocksource calibration: 2294.786 MHz.
[ 2.442518] Switching to clocksource tsc
[ 2.470504] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.492222] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.492255] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 2.492262] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 2.492326] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 2.492549] xhci_hcd 0000:05:00.0: irq 19, io mem 0xd1900000
[ 2.492671] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[ 2.492678] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 2.492683] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[ 2.492689] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
[ 2.492694] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
[ 2.492911] xHCI xhci_add_endpoint called for root hub
[ 2.492914] xHCI xhci_check_bandwidth called for root hub
[ 2.492945] hub 3-0:1.0: USB hub found
[ 2.492953] hub 3-0:1.0: 2 ports detected
[ 2.493018] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 2.493056] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 2.493262] ahci 0000:00:1f.2: version 3.0
[ 2.493278] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.493347] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 2.493532] ahci: SSS flag set, parallel bus scan disabled
[ 2.493598] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.493602] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 2.493610] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.498029] sdhci: Secure Digital Host Controller Interface driver
[ 2.498032] sdhci: Copyright(c) Pierre Ossman
[ 2.498262] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 2.498319] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.498322] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
[ 2.498415] sdhci-pci 0000:02:00.1: setting latency timer to 64
[ 2.498441] mmc0: no vmmc regulator found
[ 2.498510] Registered led device: mmc0::
[ 2.498590] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[ 2.500388] tg3.c:v3.119 (May 18, 2011)
[ 2.500443] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.500454] tg3 0000:02:00.0: setting latency timer to 64
[ 2.501173] xHCI xhci_add_endpoint called for root hub
[ 2.501176] xHCI xhci_check_bandwidth called for root hub
[ 2.501206] hub 4-0:1.0: USB hub found
[ 2.501219] hub 4-0:1.0: 2 ports detected
[ 2.503302] scsi0 : ahci
[ 2.503769] scsi1 : ahci
[ 2.503847] scsi2 : ahci
[ 2.504191] scsi3 : ahci
[ 2.504299] scsi4 : ahci
[ 2.504347] scsi5 : ahci
[ 2.504416] ata1: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08100 irq 46
[ 2.504418] ata2: DUMMY
[ 2.504420] ata3: SATA max UDMA/133 abar m2048@0xd1b08000 port 0xd1b08200 irq 46
[ 2.504421] ata4: DUMMY
[ 2.504422] ata5: DUMMY
[ 2.504423] ata6: DUMMY
[ 2.539051] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 1c:75:08:d9:1c:bf
[ 2.539055] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2.539058] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.539061] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 2.603031] hub 1-1:1.0: USB hub found
[ 2.603083] hub 1-1:1.0: 6 ports detected
[ 2.714287] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.822329] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.829172] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 2.829182] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.839150] ata1.00: configured for UDMA/133
[ 2.839394] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32 PQ: 0 ANSI: 5
[ 2.839497] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.839530] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.839557] sd 0:0:0:0: [sda] Write Protect is off
[ 2.839560] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.839581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.840403] sda: sda1 sda2 < sda5 >
[ 2.840724] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.846986] hub 2-1:1.0: USB hub found
[ 2.847080] hub 2-1:1.0: 6 ports detected
[ 2.958290] usb 3-2: new full speed USB device number 2 using xhci_hcd
[ 3.098409] usb 1-1.3: new high speed USB device number 3 using ehci_hcd
[ 3.114967] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.0/input/input5
[ 3.115042] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:05:00.0-2/input0
[ 3.141035] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-2/3-2:1.1/input/input6
[ 3.141148] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:05:00.0-2/input1
[ 3.158102] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.159795] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A0AS, 1.00, max UDMA/100
[ 3.162422] ata3.00: configured for UDMA/100
[ 3.166454] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0AS 1.00 PQ: 0 ANSI: 5
[ 3.169713] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.169723] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.169884] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.169935] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.171312] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:05:00.0-2/input2
[ 3.171336] usbcore: registered new interface driver usbhid
[ 3.171338] usbhid: USB HID core driver
[ 3.406948] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.669757] udevd[336]: starting version 173
[ 3.677910] ACPI: Battery Slot [BAT0] (battery present)
[ 7.049138] Adding 4040700k swap on /dev/sda5. Priority:-1 extents:1 across:4040700k SS
[ 7.055329] lp: driver loaded but no devices found
[ 7.346600] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.549351] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.549363] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
[ 7.549367] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
[ 7.549370] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
[ 7.549373] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
[ 7.770628] wmi: Mapper loaded
[ 7.975673] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 7.975683] acer_wmi: No or unsupported WMI interface, unable to load
[ 8.017484] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.484329] cfg80211: Calling CRDA to update world regulatory domain
[ 8.485331] [drm] Initialized drm 1.1.0 20060810
[ 8.490058] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.490063] i915 0000:00:02.0: setting latency timer to 64
[ 8.493062] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.493076] ath9k 0000:03:00.0: setting latency timer to 64
[ 8.497224] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.566690] MXM: GUID detected in BIOS
[ 8.566840] VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.PEGP handle
[ 8.566876] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 8.566881] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 8.566886] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 8.566894] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.566900] nouveau 0000:01:00.0: setting latency timer to 64
[ 8.583964] ath: EEPROM regdomain: 0x65
[ 8.583967] ath: EEPROM indicates we should expect a direct regpair map
[ 8.583970] ath: Country alpha2 being used: 00
[ 8.583971] ath: Regpair used: 0x65
[ 8.584007] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584011] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584013] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584016] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584018] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584021] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584023] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584025] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584028] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584031] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584033] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584036] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584038] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584041] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584043] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584046] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584048] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584051] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584053] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584055] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584057] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584059] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584062] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584064] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584066] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 8.584069] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 8.584072] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 8.585533] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8.588458] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 8.588463] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.588465] [drm] Driver supports precise vblank timestamp query.
[ 8.588635] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 8.588655] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.588658] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 8.604727] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 8.605331] Registered led device: ath9k-phy0
[ 8.605341] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900110e0000, irq=17
[ 8.664592] init: failsafe main process (790) killed by TERM signal
[ 8.720093] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8.720096] cfg80211: World regulatory domain updated:
[ 8.720098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.720100] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.720102] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.720103] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.720105] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.720107] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.769099] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.788583] Linux video capture interface: v2.00
[ 8.789090] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
[ 8.792108] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 8.792436] usbcore: registered new interface driver uvcvideo
[ 8.792438] USB Video Class driver (v1.1.0)
[ 8.887027] fbcon: inteldrmfb (fb0) is primary device
[ 8.887109] Console: switching to colour frame buffer device 170x48
[ 8.887132] fb0: inteldrmfb frame buffer device
[ 8.887133] drm: registered panic notifier
[ 9.187083] acpi device:2f: registered as cooling_device4
[ 9.187302] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 9.187365] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.187393] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110413/video-1156)
[ 9.187452] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
[ 9.187456] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff880158d6ef50), AE_NOT_FOUND (20110413/psparse-536)
[ 9.187641] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input9
[ 9.187676] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 9.187726] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.187757] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.187766] mei 0000:00:16.0: setting latency timer to 64
[ 9.189946] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0d9100a1
[ 9.190902] nouveau 0000:01:00.0: PCI INT A disabled
[ 9.190910] nouveau: probe of 0000:01:00.0 failed with error -22
[ 9.195075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.195168] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 9.195203] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.497856] init: apport pre-start process (1205) terminated with status 1
[ 9.498198] init: alsa-restore main process (1210) terminated with status 19
[ 9.511498] init: apport post-stop process (1235) terminated with status 1
[ 9.586105] vboxdrv: Found 4 processor cores.
[ 9.586483] vboxdrv: fAsync=0 offMin=0xf9 offMax=0xc24
[ 9.587148] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.587151] vboxdrv: Successfully loaded version 4.1.2_Ubuntu (interface 0x00190000).
[ 9.594869] vboxpci: IOMMU not found (not registered)
[ 9.638076] Bluetooth: Core ver 2.16
[ 9.638100] NET: Registered protocol family 31
[ 9.638101] Bluetooth: HCI device and connection manager initialized
[ 9.638104] Bluetooth: HCI socket layer initialized
[ 9.638106] Bluetooth: L2CAP socket layer initialized
[ 9.638457] Bluetooth: SCO socket layer initialized
[ 9.642501] Bluetooth: RFCOMM TTY layer initialized
[ 9.642506] Bluetooth: RFCOMM socket layer initialized
[ 9.642508] Bluetooth: RFCOMM ver 1.11
[ 9.642735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.642737] Bluetooth: BNEP filters: protocol multicast
[ 9.740851] hda_codec: ALC269: SKU not ready 0x598301f0
[ 9.741514] hda_codec: ALC269VB: BIOS auto-probing.
[ 9.749716] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.749887] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.750078] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.750141] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.877440] ppdev: user-space parallel port driver
[ 9.962354] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 9.995966] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 10.082731] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 10.202261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[ 11.342666] wlan0: authenticate with 00:1b:63:2c:ad:96 (try 1)
[ 11.346188] wlan0: authenticated
[ 11.346332] wlan0: associate with 00:1b:63:2c:ad:96 (try 1)
[ 11.357919] wlan0: RX AssocResp from 00:1b:63:2c:ad:96 (capab=0x431 status=0 aid=4)
[ 11.357922] wlan0: associated
[ 11.366920] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.367009] cfg80211: Calling CRDA for country: CH
[ 11.371843] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371848] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371851] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371854] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371856] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371859] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371862] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371865] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371867] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371870] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371872] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371875] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371877] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371880] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371883] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371886] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371888] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371891] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371893] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371896] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371898] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371901] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371904] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371907] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371909] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 11.371912] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.371914] cfg80211: Disabling freq 2484 MHz
[ 11.371918] cfg80211: Regulatory domain changed to country: CH
[ 11.371920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.371923] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.371925] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.371928] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.371930] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 11.694523] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 30.567932] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 44.609124] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 57.528501] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[ 1002.337336] wlan0: deauthenticating from 00:1b:63:2c:ad:96 by local choice (reason=3)
[ 1002.566178] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1002.566192] cfg80211: Restoring regulatory settings
[ 1002.566203] cfg80211: Calling CRDA to update world regulatory domain
[ 1002.574892] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1002.574902] cfg80211: World regulatory domain updated:
[ 1002.574906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1002.574914] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1002.574920] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1002.574926] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1002.574932] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1002.574938] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1075.774167] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1078.410684] wlan0: authenticate with 00:1b:63:2c:ad:96 (try 1)
[ 1078.414706] wlan0: authenticated
[ 1078.438127] wlan0: associate with 00:1b:63:2c:ad:96 (try 1)
[ 1078.441473] wlan0: RX AssocResp from 00:1b:63:2c:ad:96 (capab=0x431 status=0 aid=2)
[ 1078.441479] wlan0: associated
[ 1078.450816] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1078.450980] cfg80211: Calling CRDA for country: CH
[ 1078.456759] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456768] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456773] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456778] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456782] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456787] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456791] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456796] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456800] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456805] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456809] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456814] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456818] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456823] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456827] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456832] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456836] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456841] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456845] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456850] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456854] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456859] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456863] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456868] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456872] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1078.456877] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1078.456880] cfg80211: Disabling freq 2484 MHz
[ 1078.456887] cfg80211: Regulatory domain changed to country: CH
[ 1078.456890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1078.456896] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1078.456900] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1078.456905] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1078.456909] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 1097.750322] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 4073.421301] atkbd serio0: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
[ 4073.421311] atkbd serio0: Use 'setkeycodes e060 ' to make it known.
[ 7436.934014] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 9057.649789] usb 2-1.2: new high speed USB device number 3 using ehci_hcd
[ 9059.025055] ipheth: ipheth_get_macaddr: usb_control_msg: -110
[ 9059.025094] ipheth: probe of 2-1.2:4.2 failed with error -110
[ 9059.026025] usbcore: registered new interface driver ipheth
[12977.078327] usb 2-1.2: USB disconnect, device number 3
[13154.891676] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
[13154.891680] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[13154.891684] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[13154.891688] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[13154.891691] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[13154.891694] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[13154.892661] CPU3: Core temperature/speed normal
[13154.892663] CPU2: Core temperature/speed normal
[13154.892665] CPU1: Package temperature/speed normal
[13154.892667] CPU0: Package temperature/speed normal
[13154.892669] CPU2: Package temperature/speed normal
[13154.892672] CPU3: Package temperature/speed normal
[13192.982777] [Hardware Error]: Machine check events logged
[13457.225157] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1840)
[13457.225161] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1840)
[13457.225165] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1840)
[13457.225168] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1840)
[13457.225171] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1840)
[13457.225175] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1840)
[13457.228177] CPU2: Core temperature/speed normal
[13457.228179] CPU3: Core temperature/speed normal
[13457.228181] CPU1: Package temperature/speed normal
[13457.228184] CPU0: Package temperature/speed normal
[13457.228186] CPU3: Package temperature/speed normal
[13457.228188] CPU2: Package temperature/speed normal
[13493.792366] [Hardware Error]: Machine check events logged
[13758.057041] CPU3: Core temperature above threshold, cpu clock throttled (total events = 3190)
[13758.057045] CPU2: Core temperature above threshold, cpu clock throttled (total events = 3190)
[13758.057049] CPU1: Package temperature above threshold, cpu clock throttled (total events = 3190)
[13758.057052] CPU0: Package temperature above threshold, cpu clock throttled (total events = 3190)
[13758.057055] CPU2: Package temperature above threshold, cpu clock throttled (total events = 3190)
[13758.057058] CPU3: Package temperature above threshold, cpu clock throttled (total events = 3190)
[13758.058053] CPU3: Core temperature/speed normal
[13758.058055] CPU2: Core temperature/speed normal
[13758.058057] CPU1: Package temperature/speed normal
[13758.058059] CPU0: Package temperature/speed normal
[13758.058061] CPU2: Package temperature/speed normal
[13758.058063] CPU3: Package temperature/speed normal
[13793.650445] [Hardware Error]: Machine check events logged
[14060.584898] CPU2: Core temperature above threshold, cpu clock throttled (total events = 4379)
[14060.584902] CPU3: Core temperature above threshold, cpu clock throttled (total events = 4379)
[14060.584906] CPU1: Package temperature above threshold, cpu clock throttled (total events = 4379)
[14060.584910] CPU0: Package temperature above threshold, cpu clock throttled (total events = 4379)
[14060.584913] CPU3: Package temperature above threshold, cpu clock throttled (total events = 4379)
[14060.584916] CPU2: Package temperature above threshold, cpu clock throttled (total events = 4379)
[14060.585911] CPU2: Core temperature/speed normal
[14060.585913] CPU3: Core temperature/speed normal
[14060.585915] CPU1: Package temperature/speed normal
[14060.585918] CPU0: Package temperature/speed normal
[14060.585920] CPU3: Package temperature/speed normal
[14060.585922] CPU2: Package temperature/speed normal