dmesg - FSB418_MemAuto
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5Q-EM, BIOS 2203 07/08/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8192M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cff76000-cff80000
[ 0.000000] RAMDISK: 363ca000 - 371dd000
[ 0.000000] ACPI: RSDP 00000000000fb900 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00064 (v01 A_M_I_ OEMXSDT 07000908 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 07000908 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 090EB (v01 A0982 A0982070 00000070 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00089 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff89530 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cff8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff89570 000B0 (v01 A_M_I_ OEMOSFR 07000908 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff90a00 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096910
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831424 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061065
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8159804k/9175040k available (6566k kernel code, 787400k absent, 227836k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 3553.005 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7106.01 BogoMIPS (lpj=14212020)
[ 0.008007] pid_max: default: 32768 minimum: 301
[ 0.008025] Security Framework initialized
[ 0.008038] AppArmor: AppArmor initialized
[ 0.008039] Yama: becoming mindful.
[ 0.008527] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013538] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014857] Mount-cache hash table entries: 256
[ 0.014967] Initializing cgroup subsys cpuacct
[ 0.014972] Initializing cgroup subsys memory
[ 0.014980] Initializing cgroup subsys devices
[ 0.014982] Initializing cgroup subsys freezer
[ 0.014983] Initializing cgroup subsys blkio
[ 0.014988] Initializing cgroup subsys perf_event
[ 0.015011] CPU: Physical Processor ID: 0
[ 0.015013] CPU: Processor Core ID: 0
[ 0.015014] mce: CPU supports 6 MCE banks
[ 0.015021] CPU0: Thermal monitoring enabled (TM2)
[ 0.015024] using mwait in idle threads.
[ 0.016827] ACPI: Core revision 20110623
[ 0.020009] ftrace: allocating 27049 entries in 107 pages
[ 0.024374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064978] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 99000
[ 0.156033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156122] #2
[ 0.156124] smpboot cpu 2: start_ip = 99000
[ 0.248029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248090] #3 Ok.
[ 0.248091] smpboot cpu 3: start_ip = 99000
[ 0.340035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.340055] Brought up 4 CPUs
[ 0.340057] Total of 4 processors activated (28423.77 BogoMIPS).
[ 0.344175] devtmpfs: initialized
[ 0.344795] EVM: security.selinux
[ 0.344796] EVM: security.SMACK64
[ 0.344797] EVM: security.capability
[ 0.344915] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.344915] print_constraints: dummy:
[ 0.344915] RTC time: 22:33:22, date: 05/08/12
[ 0.344915] NET: Registered protocol family 16
[ 0.344915] Trying to unpack rootfs image as initramfs...
[ 0.344915] ACPI: bus type pci registered
[ 0.344915] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.344915] PCI: not using MMCONFIG
[ 0.344915] PCI: Using configuration type 1 for base access
[ 0.345451] bio: create slab at 0
[ 0.345451] ACPI: Added _OSI(Module Device)
[ 0.345451] ACPI: Added _OSI(Processor Device)
[ 0.345451] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.345451] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348161] ACPI: EC: Look up EC in DSDT
[ 0.348995] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.352938] ACPI: SSDT 00000000cff90100 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.353130] ACPI: Dynamic OEM Table Load:
[ 0.353132] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.353268] ACPI: SSDT 00000000cff90340 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.353460] ACPI: Dynamic OEM Table Load:
[ 0.353462] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.353597] ACPI: SSDT 00000000cff90580 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.353791] ACPI: Dynamic OEM Table Load:
[ 0.353792] ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.353929] ACPI: SSDT 00000000cff907c0 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.354123] ACPI: Dynamic OEM Table Load:
[ 0.354124] ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.354222] ACPI: Interpreter enabled
[ 0.354225] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.354237] ACPI: Using IOAPIC for interrupt routing
[ 0.354251] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.354889] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.384267] ACPI: No dock devices found.
[ 0.384270] HEST: Table not found.
[ 0.384272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.384322] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.384421] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.384423] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.384425] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.384427] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.384428] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.384430] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.384441] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.384470] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.384494] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.384496] pci 0000:00:01.0: PME# disabled
[ 0.384523] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.384555] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 0.384593] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.384625] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.384666] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.384698] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.384743] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.384759] pci 0000:00:1a.7: reg 10: [mem 0xfe9ff000-0xfe9ff3ff]
[ 0.384829] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.384833] pci 0000:00:1a.7: PME# disabled
[ 0.384851] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.384862] pci 0000:00:1b.0: reg 10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 0.384911] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.384914] pci 0000:00:1b.0: PME# disabled
[ 0.384928] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.384979] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.384981] pci 0000:00:1c.0: PME# disabled
[ 0.385001] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.385053] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.385056] pci 0000:00:1c.5: PME# disabled
[ 0.385072] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.385104] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 0.385142] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.385174] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.385214] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.385246] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 0.385292] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.385308] pci 0000:00:1d.7: reg 10: [mem 0xfe9fe000-0xfe9fe3ff]
[ 0.385379] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.385382] pci 0000:00:1d.7: PME# disabled
[ 0.385396] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.385442] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.385507] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.385548] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 0.385561] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
[ 0.385567] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
[ 0.385573] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
[ 0.385579] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
[ 0.385585] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
[ 0.385591] pci 0000:00:1f.2: reg 24: [mem 0xfe9fc000-0xfe9fc7ff]
[ 0.385624] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.385626] pci 0000:00:1f.2: PME# disabled
[ 0.385638] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.385649] pci 0000:00:1f.3: reg 10: [mem 0xfe9fd000-0xfe9fd0ff 64bit]
[ 0.385664] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.385705] pci 0000:01:00.0: [1002:68b8] type 0 class 0x000300
[ 0.385715] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.385724] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.385729] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.385738] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.385760] pci 0000:01:00.0: supports D1 D2
[ 0.385775] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.385784] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.385826] pci 0000:01:00.1: supports D1 D2
[ 0.385849] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.385851] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.385853] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.385855] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.385884] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.385891] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.385935] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.385948] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.385971] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.385986] pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
[ 0.385996] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.386049] pci 0000:02:00.0: supports D1 D2
[ 0.386050] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.386054] pci 0000:02:00.0: PME# disabled
[ 0.392040] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.392043] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.392046] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.392050] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.392107] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.392114] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.392115] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.392117] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.392119] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.392120] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.392122] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.392135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.392197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.392227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.392249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.392277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.392295] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.392297] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.392299] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.396578] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.396607] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.396636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.396664] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.396692] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.396721] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.396749] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.396779] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.396856] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.396856] vgaarb: loaded
[ 0.396856] vgaarb: bridge control possible 0000:01:00.0
[ 0.396856] i2c-core: driver [aat2870] using legacy suspend method
[ 0.396856] i2c-core: driver [aat2870] using legacy resume method
[ 0.396856] SCSI subsystem initialized
[ 0.396856] libata version 3.00 loaded.
[ 0.396856] usbcore: registered new interface driver usbfs
[ 0.396856] usbcore: registered new interface driver hub
[ 0.396856] usbcore: registered new device driver usb
[ 0.396856] PCI: Using ACPI for IRQ routing
[ 0.401698] PCI: pci_cache_line_size set to 64 bytes
[ 0.401751] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.401752] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.401827] NetLabel: Initializing
[ 0.401828] NetLabel: domain hash size = 128
[ 0.401829] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.401842] NetLabel: unlabeled traffic allowed by default
[ 0.401861] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.401861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.401861] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.412108] Switching to clocksource hpet
[ 0.417253] AppArmor: AppArmor Filesystem Enabled
[ 0.417280] pnp: PnP ACPI init
[ 0.417297] ACPI: bus type pnp registered
[ 0.417382] pnp 00:00: [bus 00-ff]
[ 0.417384] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.417385] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.417387] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.417388] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.417389] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.417391] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.417392] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.417438] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.417444] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.417481] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.417483] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.417503] pnp 00:02: [dma 4]
[ 0.417505] pnp 00:02: [io 0x0000-0x000f]
[ 0.417508] pnp 00:02: [io 0x0081-0x0083]
[ 0.417509] pnp 00:02: [io 0x0087]
[ 0.417510] pnp 00:02: [io 0x0089-0x008b]
[ 0.417511] pnp 00:02: [io 0x008f]
[ 0.417513] pnp 00:02: [io 0x00c0-0x00df]
[ 0.417530] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.417537] pnp 00:03: [io 0x0070-0x0071]
[ 0.417546] pnp 00:03: [irq 8]
[ 0.417562] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.417569] pnp 00:04: [io 0x0061]
[ 0.417584] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.417590] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.417594] pnp 00:05: [irq 13]
[ 0.417612] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.417715] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.417717] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.417718] pnp 00:06: [io 0x0290-0x029f]
[ 0.417746] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.417749] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.417803] pnp 00:07: [io 0x0010-0x001f]
[ 0.417804] pnp 00:07: [io 0x0022-0x003f]
[ 0.417806] pnp 00:07: [io 0x0044-0x004d]
[ 0.417807] pnp 00:07: [io 0x0050-0x005f]
[ 0.417808] pnp 00:07: [io 0x0062-0x0063]
[ 0.417809] pnp 00:07: [io 0x0065-0x006f]
[ 0.417810] pnp 00:07: [io 0x0072-0x007f]
[ 0.417811] pnp 00:07: [io 0x0080]
[ 0.417813] pnp 00:07: [io 0x0084-0x0086]
[ 0.417814] pnp 00:07: [io 0x0088]
[ 0.417815] pnp 00:07: [io 0x008c-0x008e]
[ 0.417816] pnp 00:07: [io 0x0090-0x009f]
[ 0.417817] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.417818] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.417820] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.417821] pnp 00:07: [io 0x0800-0x087f]
[ 0.417822] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.417823] pnp 00:07: [io 0x0500-0x057f]
[ 0.417825] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.417826] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.417827] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.417828] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.417866] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.417868] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.417869] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.417871] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.417873] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.417875] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.417878] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.417880] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.417918] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.417935] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.417963] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.417964] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.417983] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.418006] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.418034] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.418036] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418146] pnp 00:0b: [io 0x0060]
[ 0.418148] pnp 00:0b: [io 0x0064]
[ 0.418151] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.418152] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.418180] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.418182] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.418184] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418221] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.418249] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.418251] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.418337] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.418338] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.418340] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.418341] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[ 0.418342] pnp 00:0d: [mem 0xe0000000-0xffffffff]
[ 0.418377] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.418379] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.418381] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.418383] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.418385] system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.418387] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.418461] pnp: PnP ACPI: found 14 devices
[ 0.418463] ACPI: ACPI bus type pnp unregistered
[ 0.425520] PCI: max bus depth: 1 pci_try_num: 2
[ 0.425548] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.425551] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.425553] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.425555] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.425557] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.425559] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.425562] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.425564] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.425567] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.425570] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.425574] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.425576] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.425580] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.425583] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.425587] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.425603] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.425606] pci 0000:00:01.0: setting latency timer to 64
[ 0.425610] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.425615] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.425618] pci 0000:00:1c.0: setting latency timer to 64
[ 0.425622] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.425625] pci 0000:00:1c.5: setting latency timer to 64
[ 0.425629] pci 0000:00:1e.0: setting latency timer to 64
[ 0.425632] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.425633] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.425635] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.425636] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.425638] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.425639] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.425641] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.425643] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.425645] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.425647] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.425649] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.425651] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.425653] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.425655] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.425657] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.425659] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.425661] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.425663] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.425665] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.425667] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.425669] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.425701] NET: Registered protocol family 2
[ 0.425855] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.426811] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.429609] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.429796] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.429798] TCP reno registered
[ 0.429810] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.429841] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.429932] NET: Registered protocol family 1
[ 0.429953] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.429967] pci 0000:00:1a.0: PCI INT A disabled
[ 0.429980] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.429994] pci 0000:00:1a.1: PCI INT B disabled
[ 0.430001] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430014] pci 0000:00:1a.2: PCI INT C disabled
[ 0.430020] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430039] pci 0000:00:1a.7: PCI INT C disabled
[ 0.430050] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.430064] pci 0000:00:1d.0: PCI INT A disabled
[ 0.430071] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.430084] pci 0000:00:1d.1: PCI INT B disabled
[ 0.430089] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.430102] pci 0000:00:1d.2: PCI INT C disabled
[ 0.430108] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.430126] pci 0000:00:1d.7: PCI INT A disabled
[ 0.430136] pci 0000:01:00.0: Boot video device
[ 0.430141] PCI: CLS 32 bytes, default 64
[ 0.430143] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.430145] Placing 64MB software IO TLB between ffff8800cbf76000 - ffff8800cff76000
[ 0.430146] software IO TLB at phys 0xcbf76000 - 0xcff76000
[ 0.430430] audit: initializing netlink socket (disabled)
[ 0.430435] type=2000 audit(1336516401.424:1): initialized
[ 0.463912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503557] VFS: Disk quotas dquot_6.5.2
[ 0.503599] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.503966] fuse init (API version 7.17)
[ 0.504042] msgmni has been set to 15937
[ 0.504417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.504450] io scheduler noop registered
[ 0.504451] io scheduler deadline registered
[ 0.504475] io scheduler cfq registered (default)
[ 0.504548] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.504570] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.504607] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.504635] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.504677] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.504703] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.504757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.504771] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.504807] intel_idle: MWAIT substates: 0x22220
[ 0.504808] intel_idle: does not run on family 6 model 23
[ 0.504869] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.504873] ACPI: Power Button [PWRB]
[ 0.504905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.504907] ACPI: Power Button [PWRF]
[ 0.506456] ERST: Table is not found!
[ 0.506457] GHES: HEST is not enabled!
[ 0.560503] Freeing initrd memory: 14412k freed
[ 0.736202] Linux agpgart interface v0.103
[ 0.737259] brd: module loaded
[ 0.737782] loop: module loaded
[ 0.737860] ahci 0000:00:1f.2: version 3.0
[ 0.737868] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.737907] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.737929] ahci: SSS flag set, parallel bus scan disabled
[ 0.737955] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.737957] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.737960] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.776429] scsi0 : ahci
[ 0.776508] scsi1 : ahci
[ 0.776579] scsi2 : ahci
[ 0.776650] scsi3 : ahci
[ 0.776724] scsi4 : ahci
[ 0.776797] scsi5 : ahci
[ 0.776880] ata1: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc100 irq 43
[ 0.776882] ata2: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc180 irq 43
[ 0.776884] ata3: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc200 irq 43
[ 0.776885] ata4: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc280 irq 43
[ 0.776887] ata5: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc300 irq 43
[ 0.776889] ata6: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc380 irq 43
[ 0.777145] Fixed MDIO Bus: probed
[ 0.777158] tun: Universal TUN/TAP device driver, 1.6
[ 0.777159] tun: (C) 1999-2004 Max Krasnyansky
[ 0.777191] PPP generic driver version 2.4.2
[ 0.777253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.777263] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.777271] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.777273] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.777311] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.777332] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.781210] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.781220] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9ff000
[ 0.796012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.796114] hub 1-0:1.0: USB hub found
[ 0.796117] hub 1-0:1.0: 6 ports detected
[ 0.796166] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.796174] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.796176] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.796204] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.796220] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.800102] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.800111] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fe000
[ 0.816011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.816109] hub 2-0:1.0: USB hub found
[ 0.816111] hub 2-0:1.0: 6 ports detected
[ 0.816159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.816167] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.816177] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.816181] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.816183] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.816211] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.816237] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.816316] hub 3-0:1.0: USB hub found
[ 0.816319] hub 3-0:1.0: 2 ports detected
[ 0.816360] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.816365] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.816367] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.816397] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.816420] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.816498] hub 4-0:1.0: USB hub found
[ 0.816501] hub 4-0:1.0: 2 ports detected
[ 0.816541] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.816545] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.816547] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.816575] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.816592] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.816672] hub 5-0:1.0: USB hub found
[ 0.816675] hub 5-0:1.0: 2 ports detected
[ 0.816715] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.816719] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.816721] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.816750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.816768] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.816845] hub 6-0:1.0: USB hub found
[ 0.816848] hub 6-0:1.0: 2 ports detected
[ 0.816887] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.816892] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.816894] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.816921] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.816945] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.817022] hub 7-0:1.0: USB hub found
[ 0.817025] hub 7-0:1.0: 2 ports detected
[ 0.817065] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.817069] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.817071] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.817100] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.817118] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.817195] hub 8-0:1.0: USB hub found
[ 0.817198] hub 8-0:1.0: 2 ports detected
[ 0.817270] usbcore: registered new interface driver libusual
[ 0.817293] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.819862] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.819869] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.820032] mousedev: PS/2 mouse device common for all mice
[ 0.820206] rtc_cmos 00:03: RTC can wake from S4
[ 0.820311] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.820331] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.820397] device-mapper: uevent: version 1.0.3
[ 0.820469] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 0.820476] cpuidle: using governor ladder
[ 0.820477] cpuidle: using governor menu
[ 0.820478] EFI Variables Facility v0.08 2004-May-17
[ 0.820653] TCP cubic registered
[ 0.820724] NET: Registered protocol family 10
[ 0.821039] NET: Registered protocol family 17
[ 0.821052] Registering the dns_resolver key type
[ 0.821201] PM: Hibernation image not present or could not be loaded.
[ 0.821211] registered taskstats version 1
[ 0.844965] Magic number: 12:956:602
[ 0.845062] rtc_cmos 00:03: setting system clock to 2012-05-08 22:33:23 UTC (1336516403)
[ 0.845737] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.845739] EDD information not available.
[ 1.268014] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.331110] ata1.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 1.331113] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.411023] ata1.00: configured for UDMA/133
[ 1.411123] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 1.411206] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.411241] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.411269] sd 0:0:0:0: [sda] Write Protect is off
[ 1.411271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.411291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.411932] sda: sda1 sda2
[ 1.412180] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.424013] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 1.428014] Refined TSC clocksource calibration: 3552.987 MHz.
[ 1.428018] Switching to clocksource tsc
[ 1.852010] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 1.900010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.954622] ata2.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
[ 1.954625] ata2.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.014708] ata2.00: configured for UDMA/133
[ 2.014805] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
[ 2.014886] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.014896] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.014954] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.014956] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.014973] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.015773] sdb: sdb1 sdb2
[ 2.015975] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.504011] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.518528] ata3.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 2.518530] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.521893] ata3.00: configured for UDMA/133
[ 2.521970] scsi 2:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 2.522050] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.522057] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.522092] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.522094] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.522114] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.532077] sdc:
[ 2.532198] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.012011] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.029212] ata4.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 3.029218] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.032939] ata4.00: configured for UDMA/133
[ 3.032995] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 3.033064] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.033097] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.033106] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.033108] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.033131] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.042763] sdd:
[ 3.042879] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.524011] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.537181] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 3.537183] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.538012] ata5.00: configured for UDMA/133
[ 3.538072] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 3.538162] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.538173] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.538210] sd 4:0:0:0: [sde] Write Protect is off
[ 3.538212] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.538235] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.545839] sde: sde1
[ 3.545990] sd 4:0:0:0: [sde] Attached SCSI disk
[ 4.028011] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.028448] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB00, max UDMA/100
[ 4.029156] ata6.00: configured for UDMA/100
[ 4.030354] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB00 PQ: 0 ANSI: 5
[ 4.032443] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.032446] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.032546] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.032597] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 4.033696] Freeing unused kernel memory: 920k freed
[ 4.033848] Write protecting the kernel read-only data: 12288k
[ 4.037346] Freeing unused kernel memory: 1608k freed
[ 4.040186] Freeing unused kernel memory: 1196k freed
[ 4.050895] udevd[106]: starting version 175
[ 4.059452] xor: automatically using best checksumming function: generic_sse
[ 4.076005] generic_sse: 13564.000 MB/sec
[ 4.076007] xor: using function: generic_sse (13564.000 MB/sec)
[ 4.076530] device-mapper: dm-raid45: initialized v0.2594b
[ 4.078772] md: linear personality registered for level -1
[ 4.082386] md: multipath personality registered for level -4
[ 4.084778] md: raid0 personality registered for level 0
[ 4.087128] md: raid1 personality registered for level 1
[ 4.089536] async_tx: api initialized (async)
[ 4.098378] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 4.098472] generic-usb 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0
[ 4.099331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.099352] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.099379] r8169 0000:02:00.0: setting latency timer to 64
[ 4.099429] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 4.099723] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000c74000, 90:e6:ba:34:ef:99, XID 1c4000c0 IRQ 44
[ 4.099725] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.108228] generic-usb 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1
[ 4.120187] md: bind
[ 4.122340] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 4.122410] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 4.155495] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input4
[ 4.155599] generic-usb 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 4.155611] usbcore: registered new interface driver usbhid
[ 4.155612] usbhid: USB HID core driver
[ 4.156020] raid6: int64x1 2733 MB/s
[ 4.224016] raid6: int64x2 3743 MB/s
[ 4.292017] raid6: int64x4 2831 MB/s
[ 4.360007] raid6: int64x8 2400 MB/s
[ 4.428016] raid6: sse2x1 6280 MB/s
[ 4.496018] raid6: sse2x2 7021 MB/s
[ 4.564013] raid6: sse2x4 10430 MB/s
[ 4.564014] raid6: using algorithm sse2x4 (10430 MB/s)
[ 4.564802] md: raid6 personality registered for level 6
[ 4.564804] md: raid5 personality registered for level 5
[ 4.564805] md: raid4 personality registered for level 4
[ 4.565926] md: bind
[ 4.566977] bio: create slab at 1
[ 4.567025] md/raid1:md127: active with 2 out of 2 mirrors
[ 4.567048] md127: detected capacity change from 0 to 1500300722176
[ 4.567907] md127: p1
[ 4.568161] md: raid10 personality registered for level 10
[ 4.758706] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 4.758709] EXT4-fs (sdb2): write access will be enabled during recovery
[ 4.848876] EXT4-fs (sdb2): recovery complete
[ 4.848965] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.191118] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.044028] Adding 999420k swap on /dev/sdb1. Priority:-1 extents:1 across:999420k SS
[ 7.048987] udevd[560]: starting version 175
[ 7.065325] lp: driver loaded but no devices found
[ 7.072013] w83627ehf: Found W83667HG chip at 0x290
[ 7.072027] ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
[ 7.072029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.080387] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 7.116460] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.116463] Disabling lock debugging due to kernel taint
[ 7.144497] type=1400 audit(1336509209.795:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=718 comm="apparmor_parser"
[ 7.144743] type=1400 audit(1336509209.795:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=718 comm="apparmor_parser"
[ 7.144892] type=1400 audit(1336509209.795:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=718 comm="apparmor_parser"
[ 7.167571] device-mapper: multipath: version 1.3.0 loaded
[ 7.173841] [fglrx] Maximum main memory to use for locked dma buffers: 7753 MBytes.
[ 7.173924] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 7.174311] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 7.174321] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.174325] pci 0000:01:00.0: setting latency timer to 64
[ 7.174649] [fglrx] Kernel PAT support is enabled
[ 7.174662] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 7.228040] init: failsafe main process (827) killed by TERM signal
[ 7.254055] ppdev: user-space parallel port driver
[ 7.275948] Bluetooth: Core ver 2.16
[ 7.275967] NET: Registered protocol family 31
[ 7.275968] Bluetooth: HCI device and connection manager initialized
[ 7.275970] Bluetooth: HCI socket layer initialized
[ 7.275971] Bluetooth: L2CAP socket layer initialized
[ 7.275975] Bluetooth: SCO socket layer initialized
[ 7.280334] Bluetooth: RFCOMM TTY layer initialized
[ 7.280338] Bluetooth: RFCOMM socket layer initialized
[ 7.280339] Bluetooth: RFCOMM ver 1.11
[ 7.288770] type=1400 audit(1336509209.939:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1010 comm="apparmor_parser"
[ 7.289087] type=1400 audit(1336509209.939:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1010 comm="apparmor_parser"
[ 7.303901] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.303965] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.303984] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.319536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.319538] Bluetooth: BNEP filters: protocol multicast
[ 7.324910] type=1400 audit(1336509209.975:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1097 comm="apparmor_parser"
[ 7.325153] type=1400 audit(1336509209.975:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1097 comm="apparmor_parser"
[ 7.325301] type=1400 audit(1336509209.975:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1097 comm="apparmor_parser"
[ 7.326257] type=1400 audit(1336509209.975:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1096 comm="apparmor_parser"
[ 7.327469] type=1400 audit(1336509209.975:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1106 comm="apparmor_parser"
[ 7.452174] r8169 0000:02:00.0: eth0: link down
[ 7.452181] r8169 0000:02:00.0: eth0: link down
[ 7.452809] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.453015] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.966163] init: alsa-restore main process (1229) terminated with status 19
[ 8.957428] vboxdrv: Found 4 processor cores.
[ 8.957955] vboxdrv: fAsync=0 offMin=0x41e offMax=0x172d
[ 8.958006] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.958008] vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
[ 9.164574] vboxpci: IOMMU not found (not registered)
[ 9.693821] r8169 0000:02:00.0: eth0: link up
[ 9.694327] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.344013] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[ 11.348008] hda-intel: No response from codec, disabling MSI: last cmd=0x100f0000
[ 12.352008] hda-intel: Codec #1 probe error; disabling it...
[ 12.393199] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.393245] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 12.393263] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 12.410184] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.410233] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 12.527660] vesafb: mode is 1920x1440x32, linelength=7680, pages=0
[ 12.527662] vesafb: scrolling: redraw
[ 12.527663] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 12.532973] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011b80000, using 10816k, total 10816k
[ 12.533195] Console: switching to colour frame buffer device 240x90
[ 12.533226] fb0: VESA VGA frame buffer device
[ 12.546942] init: plymouth-splash main process (1746) terminated with status 1
[ 12.755462] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.756054] [fglrx] Firegl kernel thread PID: 1832
[ 12.756123] [fglrx] Firegl kernel thread PID: 1833
[ 12.756192] [fglrx] Firegl kernel thread PID: 1834
[ 12.756266] [fglrx] IRQ 46 Enabled
[ 12.836905] [fglrx] Gart USWC size:1280 M.
[ 12.836907] [fglrx] Gart cacheable size:508 M.
[ 12.836911] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 12.836913] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 12.836914] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 12.927271] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 12.927287] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.943657] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.943669] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.943783] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 12.943797] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.944342] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 12.944355] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.240017] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.540012] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.840013] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.140016] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.440015] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.740018] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.040022] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.340075] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 20.176004] eth0: no IPv6 routers present