dmesg - FSB420_Mem800+
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5Q-EM, BIOS 2203 07/08/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8192M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cff76000-cff80000
[ 0.000000] RAMDISK: 363ca000 - 371dd000
[ 0.000000] ACPI: RSDP 00000000000fb900 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00064 (v01 A_M_I_ OEMXSDT 07000908 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 07000908 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 090EB (v01 A0982 A0982070 00000070 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00089 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff89530 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cff8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff89570 000B0 (v01 A_M_I_ OEMOSFR 07000908 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff90a00 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096910
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831424 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061065
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8159804k/9175040k available (6566k kernel code, 787400k absent, 227836k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3569.682 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7139.36 BogoMIPS (lpj=14278728)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004025] Security Framework initialized
[ 0.004038] AppArmor: AppArmor initialized
[ 0.004039] Yama: becoming mindful.
[ 0.004524] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009839] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011144] Mount-cache hash table entries: 256
[ 0.011255] Initializing cgroup subsys cpuacct
[ 0.011259] Initializing cgroup subsys memory
[ 0.011267] Initializing cgroup subsys devices
[ 0.011269] Initializing cgroup subsys freezer
[ 0.011270] Initializing cgroup subsys blkio
[ 0.011276] Initializing cgroup subsys perf_event
[ 0.011298] CPU: Physical Processor ID: 0
[ 0.011299] CPU: Processor Core ID: 0
[ 0.011301] mce: CPU supports 6 MCE banks
[ 0.011308] CPU0: Thermal monitoring enabled (TM2)
[ 0.011311] using mwait in idle threads.
[ 0.013110] ACPI: Core revision 20110623
[ 0.016008] ftrace: allocating 27049 entries in 107 pages
[ 0.020371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061205] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 99000
[ 0.152032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152120] #2
[ 0.152122] smpboot cpu 2: start_ip = 99000
[ 0.244029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244092] #3 Ok.
[ 0.244093] smpboot cpu 3: start_ip = 99000
[ 0.336034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336055] Brought up 4 CPUs
[ 0.336057] Total of 4 processors activated (28559.12 BogoMIPS).
[ 0.340174] devtmpfs: initialized
[ 0.340790] EVM: security.selinux
[ 0.340791] EVM: security.SMACK64
[ 0.340792] EVM: security.capability
[ 0.340909] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.340909] print_constraints: dummy:
[ 0.340909] RTC time: 14:55:37, date: 05/11/12
[ 0.340909] NET: Registered protocol family 16
[ 0.340909] Trying to unpack rootfs image as initramfs...
[ 0.340909] ACPI: bus type pci registered
[ 0.340909] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340909] PCI: not using MMCONFIG
[ 0.340909] PCI: Using configuration type 1 for base access
[ 0.341438] bio: create slab at 0
[ 0.341438] ACPI: Added _OSI(Module Device)
[ 0.341438] ACPI: Added _OSI(Processor Device)
[ 0.341438] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341438] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.344170] ACPI: EC: Look up EC in DSDT
[ 0.344992] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.348925] ACPI: SSDT 00000000cff90100 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.349116] ACPI: Dynamic OEM Table Load:
[ 0.349118] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.349254] ACPI: SSDT 00000000cff90340 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.349445] ACPI: Dynamic OEM Table Load:
[ 0.349446] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.349580] ACPI: SSDT 00000000cff90580 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.349772] ACPI: Dynamic OEM Table Load:
[ 0.349774] ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.349910] ACPI: SSDT 00000000cff907c0 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.350102] ACPI: Dynamic OEM Table Load:
[ 0.350104] ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.350201] ACPI: Interpreter enabled
[ 0.350204] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.350216] ACPI: Using IOAPIC for interrupt routing
[ 0.350229] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.350863] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.380076] ACPI: No dock devices found.
[ 0.380078] HEST: Table not found.
[ 0.380080] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.380134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.380244] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.380246] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.380248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.380249] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.380251] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.380253] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.380263] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.380290] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.380314] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.380316] pci 0000:00:01.0: PME# disabled
[ 0.380343] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.380374] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 0.380413] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.380445] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.380485] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.380517] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.380562] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.380578] pci 0000:00:1a.7: reg 10: [mem 0xfe9ff000-0xfe9ff3ff]
[ 0.380649] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.380652] pci 0000:00:1a.7: PME# disabled
[ 0.380669] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.380680] pci 0000:00:1b.0: reg 10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 0.380730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.380732] pci 0000:00:1b.0: PME# disabled
[ 0.380747] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.380797] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.380800] pci 0000:00:1c.0: PME# disabled
[ 0.380819] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.380870] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.380873] pci 0000:00:1c.5: PME# disabled
[ 0.380890] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.380921] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 0.380959] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.380992] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.381030] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.381062] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 0.381108] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.381124] pci 0000:00:1d.7: reg 10: [mem 0xfe9fe000-0xfe9fe3ff]
[ 0.381194] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.381198] pci 0000:00:1d.7: PME# disabled
[ 0.381212] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.381257] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.381322] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.381362] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 0.381376] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
[ 0.381381] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
[ 0.381387] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
[ 0.381393] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
[ 0.381399] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
[ 0.381405] pci 0000:00:1f.2: reg 24: [mem 0xfe9fc000-0xfe9fc7ff]
[ 0.381438] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.381440] pci 0000:00:1f.2: PME# disabled
[ 0.381452] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.381463] pci 0000:00:1f.3: reg 10: [mem 0xfe9fd000-0xfe9fd0ff 64bit]
[ 0.381478] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.381521] pci 0000:01:00.0: [1002:68b8] type 0 class 0x000300
[ 0.381530] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.381538] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.381543] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.381552] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.381575] pci 0000:01:00.0: supports D1 D2
[ 0.381589] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.381598] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.381640] pci 0000:01:00.1: supports D1 D2
[ 0.381662] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.381664] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.381666] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.381669] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.381697] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.381704] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.381748] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.381761] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.381784] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.381799] pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
[ 0.381809] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.381862] pci 0000:02:00.0: supports D1 D2
[ 0.381863] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.381867] pci 0000:02:00.0: PME# disabled
[ 0.388038] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.388041] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.388044] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.388048] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.388097] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.388103] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.388105] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.388107] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.388108] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.388110] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.388112] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.388125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.388193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.388221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.388243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.388271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.388290] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.388292] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.388293] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.392552] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.392582] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.392610] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.392638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.392666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.392695] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.392723] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.392752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.392832] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.392832] vgaarb: loaded
[ 0.392832] vgaarb: bridge control possible 0000:01:00.0
[ 0.392832] i2c-core: driver [aat2870] using legacy suspend method
[ 0.392832] i2c-core: driver [aat2870] using legacy resume method
[ 0.392832] SCSI subsystem initialized
[ 0.392832] libata version 3.00 loaded.
[ 0.392832] usbcore: registered new interface driver usbfs
[ 0.392832] usbcore: registered new interface driver hub
[ 0.392832] usbcore: registered new device driver usb
[ 0.392832] PCI: Using ACPI for IRQ routing
[ 0.397665] PCI: pci_cache_line_size set to 64 bytes
[ 0.397717] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.397718] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.397794] NetLabel: Initializing
[ 0.397796] NetLabel: domain hash size = 128
[ 0.397797] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.397806] NetLabel: unlabeled traffic allowed by default
[ 0.397824] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.397824] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.397824] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.408144] Switching to clocksource hpet
[ 0.413218] AppArmor: AppArmor Filesystem Enabled
[ 0.413244] pnp: PnP ACPI init
[ 0.413260] ACPI: bus type pnp registered
[ 0.413345] pnp 00:00: [bus 00-ff]
[ 0.413346] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.413348] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.413349] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.413351] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.413352] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.413354] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.413355] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.413399] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.413405] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.413441] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.413443] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.413464] pnp 00:02: [dma 4]
[ 0.413465] pnp 00:02: [io 0x0000-0x000f]
[ 0.413470] pnp 00:02: [io 0x0081-0x0083]
[ 0.413471] pnp 00:02: [io 0x0087]
[ 0.413472] pnp 00:02: [io 0x0089-0x008b]
[ 0.413473] pnp 00:02: [io 0x008f]
[ 0.413474] pnp 00:02: [io 0x00c0-0x00df]
[ 0.413492] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.413499] pnp 00:03: [io 0x0070-0x0071]
[ 0.413508] pnp 00:03: [irq 8]
[ 0.413525] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.413531] pnp 00:04: [io 0x0061]
[ 0.413546] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.413551] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.413555] pnp 00:05: [irq 13]
[ 0.413572] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.413674] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.413675] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.413677] pnp 00:06: [io 0x0290-0x029f]
[ 0.413705] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.413707] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413762] pnp 00:07: [io 0x0010-0x001f]
[ 0.413764] pnp 00:07: [io 0x0022-0x003f]
[ 0.413765] pnp 00:07: [io 0x0044-0x004d]
[ 0.413766] pnp 00:07: [io 0x0050-0x005f]
[ 0.413767] pnp 00:07: [io 0x0062-0x0063]
[ 0.413768] pnp 00:07: [io 0x0065-0x006f]
[ 0.413770] pnp 00:07: [io 0x0072-0x007f]
[ 0.413771] pnp 00:07: [io 0x0080]
[ 0.413772] pnp 00:07: [io 0x0084-0x0086]
[ 0.413773] pnp 00:07: [io 0x0088]
[ 0.413774] pnp 00:07: [io 0x008c-0x008e]
[ 0.413775] pnp 00:07: [io 0x0090-0x009f]
[ 0.413776] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.413778] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.413779] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.413780] pnp 00:07: [io 0x0800-0x087f]
[ 0.413781] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.413783] pnp 00:07: [io 0x0500-0x057f]
[ 0.413784] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.413785] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.413786] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.413788] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.413825] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.413827] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.413828] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.413830] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.413832] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.413834] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.413837] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.413839] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413879] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.413896] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.413923] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.413925] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.413943] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.413966] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.413994] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.413996] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414105] pnp 00:0b: [io 0x0060]
[ 0.414107] pnp 00:0b: [io 0x0064]
[ 0.414110] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.414111] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.414138] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.414140] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.414142] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414178] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.414206] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.414208] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414293] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.414294] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.414296] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.414297] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[ 0.414298] pnp 00:0d: [mem 0xe0000000-0xffffffff]
[ 0.414333] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.414335] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.414337] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.414339] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.414340] system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.414342] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.414417] pnp: PnP ACPI: found 14 devices
[ 0.414418] ACPI: ACPI bus type pnp unregistered
[ 0.421457] PCI: max bus depth: 1 pci_try_num: 2
[ 0.421482] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.421485] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.421487] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.421489] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.421491] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.421493] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.421496] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.421498] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.421501] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.421504] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.421508] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.421510] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.421514] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.421516] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.421520] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.421539] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.421542] pci 0000:00:01.0: setting latency timer to 64
[ 0.421546] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.421551] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.421554] pci 0000:00:1c.0: setting latency timer to 64
[ 0.421559] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.421562] pci 0000:00:1c.5: setting latency timer to 64
[ 0.421566] pci 0000:00:1e.0: setting latency timer to 64
[ 0.421569] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.421570] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.421572] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.421573] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.421575] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.421576] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.421578] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.421580] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.421582] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.421584] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.421586] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.421588] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.421590] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.421592] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.421594] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.421596] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.421598] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.421600] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.421602] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.421604] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.421606] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.421636] NET: Registered protocol family 2
[ 0.421788] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.422732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.425488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.425846] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.425848] TCP reno registered
[ 0.425859] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.425912] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.426041] NET: Registered protocol family 1
[ 0.426065] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.426080] pci 0000:00:1a.0: PCI INT A disabled
[ 0.426092] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.426105] pci 0000:00:1a.1: PCI INT B disabled
[ 0.426113] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.426126] pci 0000:00:1a.2: PCI INT C disabled
[ 0.426132] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.426156] pci 0000:00:1a.7: PCI INT C disabled
[ 0.426168] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.426181] pci 0000:00:1d.0: PCI INT A disabled
[ 0.426188] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.426201] pci 0000:00:1d.1: PCI INT B disabled
[ 0.426206] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.426219] pci 0000:00:1d.2: PCI INT C disabled
[ 0.426225] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.426251] pci 0000:00:1d.7: PCI INT A disabled
[ 0.426262] pci 0000:01:00.0: Boot video device
[ 0.426267] PCI: CLS 32 bytes, default 64
[ 0.426269] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.426271] Placing 64MB software IO TLB between ffff8800cbf76000 - ffff8800cff76000
[ 0.426272] software IO TLB at phys 0xcbf76000 - 0xcff76000
[ 0.426646] audit: initializing netlink socket (disabled)
[ 0.426654] type=2000 audit(1336748136.420:1): initialized
[ 0.459866] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.499338] VFS: Disk quotas dquot_6.5.2
[ 0.499378] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.499742] fuse init (API version 7.17)
[ 0.499806] msgmni has been set to 15937
[ 0.500187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.500220] io scheduler noop registered
[ 0.500221] io scheduler deadline registered
[ 0.500242] io scheduler cfq registered (default)
[ 0.500316] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.500339] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.500373] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.500399] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.500439] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.500466] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.500519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.500535] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.500573] intel_idle: MWAIT substates: 0x22220
[ 0.500574] intel_idle: does not run on family 6 model 23
[ 0.500635] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.500639] ACPI: Power Button [PWRB]
[ 0.500671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.500673] ACPI: Power Button [PWRF]
[ 0.502207] ERST: Table is not found!
[ 0.502209] GHES: HEST is not enabled!
[ 0.555472] Freeing initrd memory: 14412k freed
[ 0.736208] Linux agpgart interface v0.103
[ 0.737254] brd: module loaded
[ 0.737767] loop: module loaded
[ 0.737845] ahci 0000:00:1f.2: version 3.0
[ 0.737853] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.737893] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.737914] ahci: SSS flag set, parallel bus scan disabled
[ 0.737940] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.737942] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.737945] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.776429] scsi0 : ahci
[ 0.776510] scsi1 : ahci
[ 0.776580] scsi2 : ahci
[ 0.776651] scsi3 : ahci
[ 0.776725] scsi4 : ahci
[ 0.776796] scsi5 : ahci
[ 0.776878] ata1: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc100 irq 43
[ 0.776880] ata2: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc180 irq 43
[ 0.776882] ata3: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc200 irq 43
[ 0.776884] ata4: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc280 irq 43
[ 0.776886] ata5: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc300 irq 43
[ 0.776888] ata6: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc380 irq 43
[ 0.777140] Fixed MDIO Bus: probed
[ 0.777151] tun: Universal TUN/TAP device driver, 1.6
[ 0.777153] tun: (C) 1999-2004 Max Krasnyansky
[ 0.777187] PPP generic driver version 2.4.2
[ 0.777248] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.777257] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.777266] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.777268] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.777300] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.777321] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.781187] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.781198] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9ff000
[ 0.796012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.796109] hub 1-0:1.0: USB hub found
[ 0.796112] hub 1-0:1.0: 6 ports detected
[ 0.796161] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.796169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.796171] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.796198] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.796215] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.800110] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.800120] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fe000
[ 0.816011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.816108] hub 2-0:1.0: USB hub found
[ 0.816111] hub 2-0:1.0: 6 ports detected
[ 0.816158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.816165] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.816175] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.816181] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.816183] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.816212] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.816237] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.816316] hub 3-0:1.0: USB hub found
[ 0.816318] hub 3-0:1.0: 2 ports detected
[ 0.816359] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.816364] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.816366] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.816395] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.816419] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.816500] hub 4-0:1.0: USB hub found
[ 0.816502] hub 4-0:1.0: 2 ports detected
[ 0.816544] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.816549] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.816551] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.816581] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.816599] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.816683] hub 5-0:1.0: USB hub found
[ 0.816685] hub 5-0:1.0: 2 ports detected
[ 0.816725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.816729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.816731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.816760] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.816778] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.816855] hub 6-0:1.0: USB hub found
[ 0.816857] hub 6-0:1.0: 2 ports detected
[ 0.816896] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.816901] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.816903] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.816935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.816960] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.817036] hub 7-0:1.0: USB hub found
[ 0.817039] hub 7-0:1.0: 2 ports detected
[ 0.817078] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.817082] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.817085] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.817113] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.817130] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.817205] hub 8-0:1.0: USB hub found
[ 0.817208] hub 8-0:1.0: 2 ports detected
[ 0.817278] usbcore: registered new interface driver libusual
[ 0.817302] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.819966] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.819974] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.820152] mousedev: PS/2 mouse device common for all mice
[ 0.820324] rtc_cmos 00:03: RTC can wake from S4
[ 0.820425] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.820445] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.820510] device-mapper: uevent: version 1.0.3
[ 0.820585] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.820592] cpuidle: using governor ladder
[ 0.820593] cpuidle: using governor menu
[ 0.820594] EFI Variables Facility v0.08 2004-May-17
[ 0.820764] TCP cubic registered
[ 0.820833] NET: Registered protocol family 10
[ 0.821151] NET: Registered protocol family 17
[ 0.821164] Registering the dns_resolver key type
[ 0.821314] PM: Hibernation image not present or could not be loaded.
[ 0.821324] registered taskstats version 1
[ 0.844999] Magic number: 12:195:940
[ 0.845094] rtc_cmos 00:03: setting system clock to 2012-05-11 14:55:37 UTC (1336748137)
[ 0.845762] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.845764] EDD information not available.
[ 1.268014] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.322093] ata1.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 1.322096] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.402008] ata1.00: configured for UDMA/133
[ 1.402106] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 1.402190] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.402224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.402253] sd 0:0:0:0: [sda] Write Protect is off
[ 1.402260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.402277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.402910] sda: sda1 sda2
[ 1.403151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.424014] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 1.424018] Refined TSC clocksource calibration: 3569.999 MHz.
[ 1.424022] Switching to clocksource tsc
[ 1.852010] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 1.892010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.948313] ata2.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
[ 1.948316] ata2.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.008312] ata2.00: configured for UDMA/133
[ 2.008407] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
[ 2.008490] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.008500] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.008549] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.008551] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.008573] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.009444] sdb: sdb1 sdb2
[ 2.009642] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.500011] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.510370] ata3.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 2.510377] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.513761] ata3.00: configured for UDMA/133
[ 2.513844] scsi 2:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 2.513926] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.513930] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.513972] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.513974] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.513996] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.523919] sdc:
[ 2.524042] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.004011] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.021784] ata4.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 3.021791] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.025505] ata4.00: configured for UDMA/133
[ 3.025564] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 3.025649] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.025659] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.025694] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.025696] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.025716] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.035330] sdd:
[ 3.035452] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.516010] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.524787] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 3.524789] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.525623] ata5.00: configured for UDMA/133
[ 3.525681] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 3.525753] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.525792] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.525795] sd 4:0:0:0: [sde] Write Protect is off
[ 3.525797] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.525812] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.533448] sde: sde1
[ 3.533599] sd 4:0:0:0: [sde] Attached SCSI disk
[ 4.016011] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.016484] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB00, max UDMA/100
[ 4.017193] ata6.00: configured for UDMA/100
[ 4.018436] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB00 PQ: 0 ANSI: 5
[ 4.020526] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.020529] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.020621] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.020668] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 4.021746] Freeing unused kernel memory: 920k freed
[ 4.021898] Write protecting the kernel read-only data: 12288k
[ 4.025378] Freeing unused kernel memory: 1608k freed
[ 4.028208] Freeing unused kernel memory: 1196k freed
[ 4.038881] udevd[106]: starting version 175
[ 4.056541] xor: automatically using best checksumming function: generic_sse
[ 4.070733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.070751] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.070776] r8169 0000:02:00.0: setting latency timer to 64
[ 4.070825] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 4.071129] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000c74000, 90:e6:ba:34:ef:99, XID 1c4000c0 IRQ 44
[ 4.071131] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.076007] generic_sse: 13604.000 MB/sec
[ 4.076009] xor: using function: generic_sse (13604.000 MB/sec)
[ 4.076497] device-mapper: dm-raid45: initialized v0.2594b
[ 4.079950] md: linear personality registered for level -1
[ 4.082461] md: multipath personality registered for level -4
[ 4.083532] md: raid0 personality registered for level 0
[ 4.085205] md: raid1 personality registered for level 1
[ 4.085397] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 4.085553] generic-usb 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0
[ 4.086421] async_tx: api initialized (async)
[ 4.095327] generic-usb 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1
[ 4.100422] md: bind
[ 4.103255] md: bind
[ 4.104741] bio: create slab at 1
[ 4.105004] md/raid1:md127: active with 2 out of 2 mirrors
[ 4.105016] md127: detected capacity change from 0 to 1500300722176
[ 4.105820] md127: p1
[ 4.109359] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 4.109494] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 4.142480] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input4
[ 4.142554] generic-usb 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 4.142566] usbcore: registered new interface driver usbhid
[ 4.142568] usbhid: USB HID core driver
[ 4.152019] raid6: int64x1 2747 MB/s
[ 4.220022] raid6: int64x2 3760 MB/s
[ 4.288020] raid6: int64x4 2846 MB/s
[ 4.356018] raid6: int64x8 2413 MB/s
[ 4.424018] raid6: sse2x1 6310 MB/s
[ 4.492013] raid6: sse2x2 7310 MB/s
[ 4.560008] raid6: sse2x4 10482 MB/s
[ 4.560009] raid6: using algorithm sse2x4 (10482 MB/s)
[ 4.560812] md: raid6 personality registered for level 6
[ 4.560814] md: raid5 personality registered for level 5
[ 4.560815] md: raid4 personality registered for level 4
[ 4.564367] md: raid10 personality registered for level 10
[ 4.717016] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 4.717018] EXT4-fs (sdb2): write access will be enabled during recovery
[ 4.787823] EXT4-fs (sdb2): recovery complete
[ 4.787911] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.202494] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.205756] udevd[549]: starting version 175
[ 7.047601] Adding 999420k swap on /dev/sdb1. Priority:-1 extents:1 across:999420k SS
[ 7.088575] lp: driver loaded but no devices found
[ 7.091596] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.091598] Disabling lock debugging due to kernel taint
[ 7.096405] device-mapper: multipath: version 1.3.0 loaded
[ 7.098013] w83627ehf: Found W83667HG chip at 0x290
[ 7.098042] ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
[ 7.098044] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.116891] type=1400 audit(1336740943.768:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
[ 7.117139] type=1400 audit(1336740943.768:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[ 7.117282] type=1400 audit(1336740943.768:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[ 7.118216] type=1400 audit(1336740943.768:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=757 comm="apparmor_parser"
[ 7.118461] type=1400 audit(1336740943.768:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=757 comm="apparmor_parser"
[ 7.118598] type=1400 audit(1336740943.768:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=757 comm="apparmor_parser"
[ 7.152898] [fglrx] Maximum main memory to use for locked dma buffers: 7753 MBytes.
[ 7.152982] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 7.153299] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.153336] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.153359] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.153372] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 7.153378] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.153381] pci 0000:01:00.0: setting latency timer to 64
[ 7.153705] [fglrx] Kernel PAT support is enabled
[ 7.153719] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 7.236726] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 7.401384] EXT4-fs (md127p1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 7.412781] init: failsafe main process (1050) killed by TERM signal
[ 7.429234] ppdev: user-space parallel port driver
[ 7.443322] Bluetooth: Core ver 2.16
[ 7.443338] NET: Registered protocol family 31
[ 7.443339] Bluetooth: HCI device and connection manager initialized
[ 7.443341] Bluetooth: HCI socket layer initialized
[ 7.443342] Bluetooth: L2CAP socket layer initialized
[ 7.443476] Bluetooth: SCO socket layer initialized
[ 7.446631] type=1400 audit(1336740944.096:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1104 comm="apparmor_parser"
[ 7.447042] type=1400 audit(1336740944.096:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1104 comm="apparmor_parser"
[ 7.452163] Bluetooth: RFCOMM TTY layer initialized
[ 7.452166] Bluetooth: RFCOMM socket layer initialized
[ 7.452167] Bluetooth: RFCOMM ver 1.11
[ 7.453252] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.453253] Bluetooth: BNEP filters: protocol multicast
[ 7.462106] type=1400 audit(1336740944.112:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1157 comm="apparmor_parser"
[ 7.463913] type=1400 audit(1336740944.112:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1158 comm="apparmor_parser"
[ 7.464700] r8169 0000:02:00.0: eth0: link down
[ 7.464704] r8169 0000:02:00.0: eth0: link down
[ 7.466136] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.466824] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.835004] init: alsa-restore main process (1230) terminated with status 19
[ 8.823275] vboxdrv: Found 4 processor cores.
[ 8.823663] vboxdrv: fAsync=0 offMin=0x3e2 offMax=0x1a4c
[ 8.823946] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.823947] vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
[ 9.028764] vboxpci: IOMMU not found (not registered)
[ 9.474241] r8169 0000:02:00.0: eth0: link up
[ 9.474744] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.196011] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[ 11.200005] hda-intel: No response from codec, disabling MSI: last cmd=0x100f0000
[ 12.204010] hda-intel: Codec #1 probe error; disabling it...
[ 12.243594] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.243640] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 12.243657] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 12.257537] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.257645] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 12.330847] vesafb: mode is 1920x1440x32, linelength=7680, pages=0
[ 12.330849] vesafb: scrolling: redraw
[ 12.330850] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 12.336137] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011980000, using 10816k, total 10816k
[ 12.336345] Console: switching to colour frame buffer device 240x90
[ 12.336375] fb0: VESA VGA frame buffer device
[ 12.350816] init: plymouth-splash main process (1759) terminated with status 1
[ 12.462861] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[ 12.463414] [fglrx] Firegl kernel thread PID: 1825
[ 12.463485] [fglrx] Firegl kernel thread PID: 1826
[ 12.463556] [fglrx] Firegl kernel thread PID: 1827
[ 12.463633] [fglrx] IRQ 46 Enabled
[ 12.542911] [fglrx] Gart USWC size:1280 M.
[ 12.542914] [fglrx] Gart cacheable size:508 M.
[ 12.542917] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 12.542919] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 12.542920] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 12.601421] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 12.601437] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.617814] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.617826] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.617941] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 12.617954] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.618501] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 12.618513] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.916015] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.216032] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.516012] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.816024] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.116009] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.416014] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 14.716016] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.016011] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 19.728008] eth0: no IPv6 routers present