dmesg - FSB418_Mem1004_BiosPerformanceOptions
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@yellow) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5Q-EM, BIOS 2203 07/08/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8192M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8704MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cff76000-cff80000
[ 0.000000] RAMDISK: 363ca000 - 371dd000
[ 0.000000] ACPI: RSDP 00000000000fb900 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00064 (v01 A_M_I_ OEMXSDT 07000908 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 07000908 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80440 090EB (v01 A0982 A0982070 00000070 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 07000908 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 07000908 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00089 (v01 A_M_I_ AMI_OEM 07000908 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff89530 00038 (v01 A_M_I_ OEMHPET 07000908 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000cff8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000908 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff89570 000B0 (v01 A_M_I_ OEMOSFR 07000908 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff90a00 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096910
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831424 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061065
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8159804k/9175040k available (6566k kernel code, 787400k absent, 227836k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3552.933 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7105.86 BogoMIPS (lpj=14211732)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004024] Security Framework initialized
[ 0.004037] AppArmor: AppArmor initialized
[ 0.004038] Yama: becoming mindful.
[ 0.004518] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009406] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010605] Mount-cache hash table entries: 256
[ 0.010711] Initializing cgroup subsys cpuacct
[ 0.010715] Initializing cgroup subsys memory
[ 0.010723] Initializing cgroup subsys devices
[ 0.010724] Initializing cgroup subsys freezer
[ 0.010726] Initializing cgroup subsys blkio
[ 0.010731] Initializing cgroup subsys perf_event
[ 0.010752] CPU: Physical Processor ID: 0
[ 0.010753] CPU: Processor Core ID: 0
[ 0.010754] mce: CPU supports 6 MCE banks
[ 0.010761] CPU0: Thermal monitoring enabled (TM2)
[ 0.010763] using mwait in idle threads.
[ 0.012533] ACPI: Core revision 20110623
[ 0.016008] ftrace: allocating 27049 entries in 107 pages
[ 0.020373] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060524] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 99000
[ 0.152029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152112] #2
[ 0.152114] smpboot cpu 2: start_ip = 99000
[ 0.244028] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244087] #3 Ok.
[ 0.244088] smpboot cpu 3: start_ip = 99000
[ 0.336033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.336052] Brought up 4 CPUs
[ 0.336054] Total of 4 processors activated (28423.62 BogoMIPS).
[ 0.340165] devtmpfs: initialized
[ 0.340787] EVM: security.selinux
[ 0.340788] EVM: security.SMACK64
[ 0.340789] EVM: security.capability
[ 0.340900] PM: Registering ACPI NVS region at cff8e000 (270336 bytes)
[ 0.340900] print_constraints: dummy:
[ 0.340900] RTC time: 22:55:13, date: 05/08/12
[ 0.340900] NET: Registered protocol family 16
[ 0.340900] Trying to unpack rootfs image as initramfs...
[ 0.340900] ACPI: bus type pci registered
[ 0.340900] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.340900] PCI: not using MMCONFIG
[ 0.340900] PCI: Using configuration type 1 for base access
[ 0.341425] bio: create slab at 0
[ 0.341425] ACPI: Added _OSI(Module Device)
[ 0.341425] ACPI: Added _OSI(Processor Device)
[ 0.341425] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341425] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.341425] ACPI: EC: Look up EC in DSDT
[ 0.344862] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.348734] ACPI: SSDT 00000000cff90100 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.348927] ACPI: Dynamic OEM Table Load:
[ 0.348929] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.349065] ACPI: SSDT 00000000cff90340 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.349256] ACPI: Dynamic OEM Table Load:
[ 0.349258] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 0.349393] ACPI: SSDT 00000000cff90580 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.349587] ACPI: Dynamic OEM Table Load:
[ 0.349589] ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 0.349726] ACPI: SSDT 00000000cff907c0 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.349919] ACPI: Dynamic OEM Table Load:
[ 0.349921] ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 0.350019] ACPI: Interpreter enabled
[ 0.350022] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.350034] ACPI: Using IOAPIC for interrupt routing
[ 0.350047] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.350684] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.379944] ACPI: No dock devices found.
[ 0.379947] HEST: Table not found.
[ 0.379949] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.380105] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.380107] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.380108] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.380110] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.380112] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.380114] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.380126] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.380153] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.380176] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.380179] pci 0000:00:01.0: PME# disabled
[ 0.380206] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.380237] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 0.380276] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.380310] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.380349] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.380381] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.380426] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.380442] pci 0000:00:1a.7: reg 10: [mem 0xfe9ff000-0xfe9ff3ff]
[ 0.380512] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.380515] pci 0000:00:1a.7: PME# disabled
[ 0.380532] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.380543] pci 0000:00:1b.0: reg 10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[ 0.380592] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.380595] pci 0000:00:1b.0: PME# disabled
[ 0.380610] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.380660] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.380663] pci 0000:00:1c.0: PME# disabled
[ 0.380680] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.380732] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.380734] pci 0000:00:1c.5: PME# disabled
[ 0.380751] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.380782] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 0.380821] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.380853] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.380891] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.380922] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 0.380969] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.380985] pci 0000:00:1d.7: reg 10: [mem 0xfe9fe000-0xfe9fe3ff]
[ 0.381054] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.381058] pci 0000:00:1d.7: PME# disabled
[ 0.381072] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.381117] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.381183] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.381223] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 0.381236] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
[ 0.381242] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
[ 0.381248] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
[ 0.381253] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
[ 0.381259] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
[ 0.381265] pci 0000:00:1f.2: reg 24: [mem 0xfe9fc000-0xfe9fc7ff]
[ 0.381298] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.381301] pci 0000:00:1f.2: PME# disabled
[ 0.381312] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.381324] pci 0000:00:1f.3: reg 10: [mem 0xfe9fd000-0xfe9fd0ff 64bit]
[ 0.381340] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.381380] pci 0000:01:00.0: [1002:68b8] type 0 class 0x000300
[ 0.381389] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.381397] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.381402] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.381411] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.381433] pci 0000:01:00.0: supports D1 D2
[ 0.381448] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.381457] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.381498] pci 0000:01:00.1: supports D1 D2
[ 0.381522] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.381524] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.381526] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.381529] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.381557] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.381563] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.381606] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.381619] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.381642] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.381657] pci 0000:02:00.0: reg 20: [mem 0xfdef0000-0xfdefffff 64bit pref]
[ 0.381667] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.381721] pci 0000:02:00.0: supports D1 D2
[ 0.381722] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.381726] pci 0000:02:00.0: PME# disabled
[ 0.388038] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.388041] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.388044] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.388048] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.388104] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.388115] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.388117] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.388121] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.388123] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.388125] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.388126] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.388139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.388197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.388226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.388248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.388277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.388295] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.388297] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.388298] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.392558] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.392588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.392616] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.392644] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.392673] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.392701] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.392729] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.392759] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.392834] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.392834] vgaarb: loaded
[ 0.392834] vgaarb: bridge control possible 0000:01:00.0
[ 0.392834] i2c-core: driver [aat2870] using legacy suspend method
[ 0.392834] i2c-core: driver [aat2870] using legacy resume method
[ 0.392834] SCSI subsystem initialized
[ 0.392834] libata version 3.00 loaded.
[ 0.392834] usbcore: registered new interface driver usbfs
[ 0.392834] usbcore: registered new interface driver hub
[ 0.392834] usbcore: registered new device driver usb
[ 0.392834] PCI: Using ACPI for IRQ routing
[ 0.397632] PCI: pci_cache_line_size set to 64 bytes
[ 0.397683] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.397684] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.397757] NetLabel: Initializing
[ 0.397758] NetLabel: domain hash size = 128
[ 0.397759] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.397768] NetLabel: unlabeled traffic allowed by default
[ 0.397786] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.397786] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.397786] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.408124] Switching to clocksource hpet
[ 0.413060] AppArmor: AppArmor Filesystem Enabled
[ 0.413084] pnp: PnP ACPI init
[ 0.413096] ACPI: bus type pnp registered
[ 0.413176] pnp 00:00: [bus 00-ff]
[ 0.413178] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.413180] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.413181] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.413182] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.413184] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.413185] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.413187] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.413227] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.413233] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.413268] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.413270] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.413290] pnp 00:02: [dma 4]
[ 0.413291] pnp 00:02: [io 0x0000-0x000f]
[ 0.413295] pnp 00:02: [io 0x0081-0x0083]
[ 0.413296] pnp 00:02: [io 0x0087]
[ 0.413297] pnp 00:02: [io 0x0089-0x008b]
[ 0.413298] pnp 00:02: [io 0x008f]
[ 0.413299] pnp 00:02: [io 0x00c0-0x00df]
[ 0.413317] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.413323] pnp 00:03: [io 0x0070-0x0071]
[ 0.413331] pnp 00:03: [irq 8]
[ 0.413350] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.413357] pnp 00:04: [io 0x0061]
[ 0.413371] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.413377] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.413380] pnp 00:05: [irq 13]
[ 0.413398] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.413499] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.413500] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.413502] pnp 00:06: [io 0x0290-0x029f]
[ 0.413530] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.413532] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413586] pnp 00:07: [io 0x0010-0x001f]
[ 0.413588] pnp 00:07: [io 0x0022-0x003f]
[ 0.413589] pnp 00:07: [io 0x0044-0x004d]
[ 0.413590] pnp 00:07: [io 0x0050-0x005f]
[ 0.413591] pnp 00:07: [io 0x0062-0x0063]
[ 0.413592] pnp 00:07: [io 0x0065-0x006f]
[ 0.413594] pnp 00:07: [io 0x0072-0x007f]
[ 0.413595] pnp 00:07: [io 0x0080]
[ 0.413596] pnp 00:07: [io 0x0084-0x0086]
[ 0.413597] pnp 00:07: [io 0x0088]
[ 0.413598] pnp 00:07: [io 0x008c-0x008e]
[ 0.413600] pnp 00:07: [io 0x0090-0x009f]
[ 0.413601] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.413602] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.413603] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.413604] pnp 00:07: [io 0x0800-0x087f]
[ 0.413605] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.413607] pnp 00:07: [io 0x0500-0x057f]
[ 0.413608] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.413609] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.413611] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.413612] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.413649] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.413651] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.413653] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.413655] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.413656] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.413658] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.413662] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.413664] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413701] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.413719] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.413747] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.413748] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.413767] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.413790] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.413817] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.413819] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.413930] pnp 00:0b: [io 0x0060]
[ 0.413931] pnp 00:0b: [io 0x0064]
[ 0.413934] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.413936] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.413963] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.413965] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.413967] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414003] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.414031] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.414033] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.414119] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.414121] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.414122] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.414123] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[ 0.414124] pnp 00:0d: [mem 0xe0000000-0xffffffff]
[ 0.414160] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.414162] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.414164] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.414166] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.414168] system 00:0d: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.414170] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.414244] pnp: PnP ACPI: found 14 devices
[ 0.414245] ACPI: ACPI bus type pnp unregistered
[ 0.421225] PCI: max bus depth: 1 pci_try_num: 2
[ 0.421250] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[ 0.421253] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.421255] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.421256] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.421259] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.421261] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.421264] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.421266] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.421269] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
[ 0.421272] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.421276] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.421278] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.421281] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.421284] pci 0000:00:1c.5: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.421288] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.421305] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.421307] pci 0000:00:01.0: setting latency timer to 64
[ 0.421311] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.421316] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.421319] pci 0000:00:1c.0: setting latency timer to 64
[ 0.421323] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.421326] pci 0000:00:1c.5: setting latency timer to 64
[ 0.421330] pci 0000:00:1e.0: setting latency timer to 64
[ 0.421333] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.421334] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.421336] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.421337] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.421339] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.421340] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.421342] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.421344] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.421346] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.421348] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.421350] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.421352] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.421354] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.421356] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.421358] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.421361] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.421363] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.421364] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.421366] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.421368] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.421370] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.421401] NET: Registered protocol family 2
[ 0.421548] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.422450] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.424933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.425255] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.425257] TCP reno registered
[ 0.425267] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.425313] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.425428] NET: Registered protocol family 1
[ 0.425449] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.425463] pci 0000:00:1a.0: PCI INT A disabled
[ 0.425479] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.425493] pci 0000:00:1a.1: PCI INT B disabled
[ 0.425500] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.425513] pci 0000:00:1a.2: PCI INT C disabled
[ 0.425519] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.425540] pci 0000:00:1a.7: PCI INT C disabled
[ 0.425552] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.425565] pci 0000:00:1d.0: PCI INT A disabled
[ 0.425572] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.425585] pci 0000:00:1d.1: PCI INT B disabled
[ 0.425590] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.425603] pci 0000:00:1d.2: PCI INT C disabled
[ 0.425609] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.425633] pci 0000:00:1d.7: PCI INT A disabled
[ 0.425644] pci 0000:01:00.0: Boot video device
[ 0.425649] PCI: CLS 32 bytes, default 64
[ 0.425651] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.425653] Placing 64MB software IO TLB between ffff8800cbf76000 - ffff8800cff76000
[ 0.425655] software IO TLB at phys 0xcbf76000 - 0xcff76000
[ 0.426009] audit: initializing netlink socket (disabled)
[ 0.426016] type=2000 audit(1336517713.420:1): initialized
[ 0.457147] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.492236] VFS: Disk quotas dquot_6.5.2
[ 0.492275] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.492628] fuse init (API version 7.17)
[ 0.492690] msgmni has been set to 15937
[ 0.493047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.493079] io scheduler noop registered
[ 0.493080] io scheduler deadline registered
[ 0.493102] io scheduler cfq registered (default)
[ 0.493173] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.493194] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.493227] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.493253] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.493293] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.493318] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.493372] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.493388] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.493425] intel_idle: MWAIT substates: 0x22220
[ 0.493426] intel_idle: does not run on family 6 model 23
[ 0.493483] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.493486] ACPI: Power Button [PWRB]
[ 0.493518] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.493520] ACPI: Power Button [PWRF]
[ 0.495013] ERST: Table is not found!
[ 0.495015] GHES: HEST is not enabled!
[ 0.550979] Freeing initrd memory: 14412k freed
[ 0.728206] Linux agpgart interface v0.103
[ 0.729239] brd: module loaded
[ 0.729747] loop: module loaded
[ 0.729823] ahci 0000:00:1f.2: version 3.0
[ 0.729831] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.729869] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.729891] ahci: SSS flag set, parallel bus scan disabled
[ 0.729916] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.729918] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.729921] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.768417] scsi0 : ahci
[ 0.768496] scsi1 : ahci
[ 0.768566] scsi2 : ahci
[ 0.768634] scsi3 : ahci
[ 0.768707] scsi4 : ahci
[ 0.768776] scsi5 : ahci
[ 0.768858] ata1: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc100 irq 43
[ 0.768860] ata2: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc180 irq 43
[ 0.768862] ata3: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc200 irq 43
[ 0.768864] ata4: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc280 irq 43
[ 0.768866] ata5: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc300 irq 43
[ 0.768867] ata6: SATA max UDMA/133 abar m2048@0xfe9fc000 port 0xfe9fc380 irq 43
[ 0.769114] Fixed MDIO Bus: probed
[ 0.769126] tun: Universal TUN/TAP device driver, 1.6
[ 0.769127] tun: (C) 1999-2004 Max Krasnyansky
[ 0.769159] PPP generic driver version 2.4.2
[ 0.769219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.769229] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.769237] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.769240] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.769271] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.769291] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.773160] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.773171] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9ff000
[ 0.788012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.788107] hub 1-0:1.0: USB hub found
[ 0.788110] hub 1-0:1.0: 6 ports detected
[ 0.788159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.788167] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.788169] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.788196] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.788212] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.792081] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.792091] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fe000
[ 0.804011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.804108] hub 2-0:1.0: USB hub found
[ 0.804110] hub 2-0:1.0: 6 ports detected
[ 0.804157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.804165] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.804174] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.804180] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.804182] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.804211] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.804236] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.804314] hub 3-0:1.0: USB hub found
[ 0.804317] hub 3-0:1.0: 2 ports detected
[ 0.804358] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.804363] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.804365] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.804393] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.804417] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.804497] hub 4-0:1.0: USB hub found
[ 0.804500] hub 4-0:1.0: 2 ports detected
[ 0.804541] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.804545] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.804548] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.804578] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.804595] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.804679] hub 5-0:1.0: USB hub found
[ 0.804681] hub 5-0:1.0: 2 ports detected
[ 0.804720] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.804724] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.804727] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.804755] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.804773] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.804849] hub 6-0:1.0: USB hub found
[ 0.804851] hub 6-0:1.0: 2 ports detected
[ 0.804890] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.804894] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.804896] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.804928] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.804952] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.805029] hub 7-0:1.0: USB hub found
[ 0.805031] hub 7-0:1.0: 2 ports detected
[ 0.805070] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.805074] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.805076] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.805105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.805122] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.805197] hub 8-0:1.0: USB hub found
[ 0.805200] hub 8-0:1.0: 2 ports detected
[ 0.805270] usbcore: registered new interface driver libusual
[ 0.805294] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.807857] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.807864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.808025] mousedev: PS/2 mouse device common for all mice
[ 0.808192] rtc_cmos 00:03: RTC can wake from S4
[ 0.808294] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.808314] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.808377] device-mapper: uevent: version 1.0.3
[ 0.808446] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.808452] cpuidle: using governor ladder
[ 0.808454] cpuidle: using governor menu
[ 0.808455] EFI Variables Facility v0.08 2004-May-17
[ 0.808621] TCP cubic registered
[ 0.808689] NET: Registered protocol family 10
[ 0.809003] NET: Registered protocol family 17
[ 0.809016] Registering the dns_resolver key type
[ 0.809163] PM: Hibernation image not present or could not be loaded.
[ 0.809172] registered taskstats version 1
[ 0.830525] Magic number: 12:818:956
[ 0.830615] rtc_cmos 00:03: setting system clock to 2012-05-08 22:55:14 UTC (1336517714)
[ 0.831267] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.831268] EDD information not available.
[ 1.260013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.263997] ata1.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 1.264000] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.273997] ata1.00: configured for UDMA/133
[ 1.274093] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 1.274175] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.274208] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.274236] sd 0:0:0:0: [sda] Write Protect is off
[ 1.274242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.274268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.274924] sda: sda1 sda2
[ 1.275163] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.412012] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 1.424015] Refined TSC clocksource calibration: 3552.987 MHz.
[ 1.424018] Switching to clocksource tsc
[ 1.764011] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.774885] ata2.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
[ 1.774888] ata2.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.784885] ata2.00: configured for UDMA/133
[ 1.784972] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
[ 1.785057] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.785068] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.785120] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.785122] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.785139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.785577] sdb: sdb1 sdb2
[ 1.785783] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.840010] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.276011] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.279708] ata3.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 2.279710] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.283711] ata3.00: configured for UDMA/133
[ 2.283768] scsi 2:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 2.283843] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.283850] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.283893] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.283896] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.283918] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.292590] sdc:
[ 2.292715] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.772010] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.776014] ata4.00: ATA-8: WDC WD15EARS-00J2GB0, 80.00A80, max UDMA/133
[ 2.776016] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.780014] ata4.00: configured for UDMA/133
[ 2.780060] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00J 80.0 PQ: 0 ANSI: 5
[ 2.780121] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.780151] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.780160] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.780162] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.780210] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.788746] sdd:
[ 2.788868] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.272010] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.272768] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 3.272771] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.273610] ata5.00: configured for UDMA/133
[ 3.273663] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 3.273730] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.273759] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 3.273769] sd 4:0:0:0: [sde] Write Protect is off
[ 3.273771] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.273812] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.278660] sde: sde1
[ 3.278810] sd 4:0:0:0: [sde] Attached SCSI disk
[ 3.764010] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.764470] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB00, max UDMA/100
[ 3.765179] ata6.00: configured for UDMA/100
[ 3.765927] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB00 PQ: 0 ANSI: 5
[ 3.768017] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.768020] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.768106] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 3.768146] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 3.769199] Freeing unused kernel memory: 920k freed
[ 3.769345] Write protecting the kernel read-only data: 12288k
[ 3.772842] Freeing unused kernel memory: 1608k freed
[ 3.775662] Freeing unused kernel memory: 1196k freed
[ 3.786210] udevd[106]: starting version 175
[ 3.805685] xor: automatically using best checksumming function: generic_sse
[ 3.811860] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.811876] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.811899] r8169 0000:02:00.0: setting latency timer to 64
[ 3.811947] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 3.812239] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000c74000, 90:e6:ba:34:ef:99, XID 1c4000c0 IRQ 44
[ 3.812241] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 3.824007] generic_sse: 13503.000 MB/sec
[ 3.824009] xor: using function: generic_sse (13503.000 MB/sec)
[ 3.824536] device-mapper: dm-raid45: initialized v0.2594b
[ 3.826241] md: linear personality registered for level -1
[ 3.827353] md: multipath personality registered for level -4
[ 3.829227] md: raid0 personality registered for level 0
[ 3.830514] md: raid1 personality registered for level 1
[ 3.831356] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 3.831471] generic-usb 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input0
[ 3.833541] async_tx: api initialized (async)
[ 3.847330] generic-usb 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.2-1/input1
[ 3.853452] md: bind
[ 3.861423] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 3.861490] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 3.894477] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input4
[ 3.894558] generic-usb 0003:046D:C505.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 3.894572] usbcore: registered new interface driver usbhid
[ 3.894574] usbhid: USB HID core driver
[ 3.900028] raid6: int64x1 2738 MB/s
[ 3.968016] raid6: int64x2 3748 MB/s
[ 4.036014] raid6: int64x4 2828 MB/s
[ 4.104019] raid6: int64x8 2395 MB/s
[ 4.172013] raid6: sse2x1 6296 MB/s
[ 4.240007] raid6: sse2x2 7178 MB/s
[ 4.308014] raid6: sse2x4 10453 MB/s
[ 4.308015] raid6: using algorithm sse2x4 (10453 MB/s)
[ 4.308292] md: bind
[ 4.308796] md: raid6 personality registered for level 6
[ 4.308798] md: raid5 personality registered for level 5
[ 4.308799] md: raid4 personality registered for level 4
[ 4.309356] bio: create slab at 1
[ 4.309406] md/raid1:md127: active with 2 out of 2 mirrors
[ 4.309420] md127: detected capacity change from 0 to 1500300722176
[ 4.310149] md127: p1
[ 4.311999] md: raid10 personality registered for level 10
[ 4.459054] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 4.459057] EXT4-fs (sdb2): write access will be enabled during recovery
[ 4.507956] EXT4-fs (sdb2): recovery complete
[ 4.508045] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.864663] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.867025] udevd[563]: starting version 175
[ 5.878027] lp: driver loaded but no devices found
[ 5.880469] w83627ehf: Found W83667HG chip at 0x290
[ 5.880482] ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
[ 5.880484] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.914158] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.914161] Disabling lock debugging due to kernel taint
[ 5.933737] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.933774] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.933791] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.972259] device-mapper: multipath: version 1.3.0 loaded
[ 5.972684] [fglrx] Maximum main memory to use for locked dma buffers: 7753 MBytes.
[ 5.972765] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 5.973138] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 5.973149] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.973153] pci 0000:01:00.0: setting latency timer to 64
[ 5.973464] [fglrx] Kernel PAT support is enabled
[ 5.973475] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 6.692386] Adding 999420k swap on /dev/sdb1. Priority:-1 extents:1 across:999420k SS
[ 6.754949] type=1400 audit(1336510520.417:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=812 comm="apparmor_parser"
[ 6.754968] type=1400 audit(1336510520.417:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
[ 6.755197] type=1400 audit(1336510520.417:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=812 comm="apparmor_parser"
[ 6.755212] type=1400 audit(1336510520.417:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[ 6.755338] type=1400 audit(1336510520.417:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=812 comm="apparmor_parser"
[ 6.755354] type=1400 audit(1336510520.417:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
[ 6.804198] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 6.829410] init: failsafe main process (1026) killed by TERM signal
[ 6.849065] ppdev: user-space parallel port driver
[ 6.855188] Bluetooth: Core ver 2.16
[ 6.855204] NET: Registered protocol family 31
[ 6.855205] Bluetooth: HCI device and connection manager initialized
[ 6.855207] Bluetooth: HCI socket layer initialized
[ 6.855208] Bluetooth: L2CAP socket layer initialized
[ 6.857952] Bluetooth: SCO socket layer initialized
[ 6.860432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.860433] Bluetooth: BNEP filters: protocol multicast
[ 6.866098] Bluetooth: RFCOMM TTY layer initialized
[ 6.866103] Bluetooth: RFCOMM socket layer initialized
[ 6.866104] Bluetooth: RFCOMM ver 1.11
[ 6.867503] type=1400 audit(1336510520.529:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1093 comm="apparmor_parser"
[ 6.867798] type=1400 audit(1336510520.529:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1093 comm="apparmor_parser"
[ 6.879720] r8169 0000:02:00.0: eth0: link down
[ 6.879724] r8169 0000:02:00.0: eth0: link down
[ 6.880270] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.880451] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.891912] type=1400 audit(1336510520.553:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1133 comm="apparmor_parser"
[ 6.892776] type=1400 audit(1336510520.557:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1134 comm="apparmor_parser"
[ 7.415900] init: alsa-restore main process (1200) terminated with status 19
[ 7.958869] vboxdrv: Found 4 processor cores.
[ 7.959209] vboxdrv: fAsync=0 offMin=0x3c1 offMax=0x146c
[ 7.959253] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 7.959254] vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
[ 8.163881] vboxpci: IOMMU not found (not registered)
[ 8.954981] r8169 0000:02:00.0: eth0: link up
[ 8.955476] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.976007] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[ 9.980009] hda-intel: No response from codec, disabling MSI: last cmd=0x100f0000
[ 10.984007] hda-intel: Codec #1 probe error; disabling it...
[ 11.023455] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.023500] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 11.023517] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 11.037499] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.037556] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 11.231156] vesafb: mode is 1920x1440x32, linelength=7680, pages=0
[ 11.231158] vesafb: scrolling: redraw
[ 11.231159] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 11.236388] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011b80000, using 10816k, total 10816k
[ 11.236586] Console: switching to colour frame buffer device 240x90
[ 11.236616] fb0: VESA VGA frame buffer device
[ 11.249929] init: plymouth-splash main process (1679) terminated with status 1
[ 11.358634] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[ 11.359181] [fglrx] Firegl kernel thread PID: 1693
[ 11.359256] [fglrx] Firegl kernel thread PID: 1694
[ 11.359326] [fglrx] Firegl kernel thread PID: 1695
[ 11.359404] [fglrx] IRQ 46 Enabled
[ 11.438715] [fglrx] Gart USWC size:1280 M.
[ 11.438717] [fglrx] Gart cacheable size:508 M.
[ 11.438720] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 11.438722] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 11.438724] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 11.497087] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 11.497103] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.513479] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 11.513491] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.513604] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 11.513617] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 11.514166] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 11.514179] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 11.812027] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.112010] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.412045] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 12.712039] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.012069] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.312023] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.612014] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.912007] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 19.120005] eth0: no IPv6 routers present