dmesg - ioquake3_based_games_on_GF9800GT
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-17-generic (root@devel.trisquel.info) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #5trisquel1 SMP Thu Mar 29 10:16:24 UTC 2012 (Ubuntu 3.0.0-17.30+5.5trisquel1-generic )
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveXFire-eSATA2.., BIOS P3.70 12/17/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-00000000cffb0000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cffb0000 page 4k
kernel direct mapping tables up to cffb0000 @ 1fffa000-20000000
RAMDISK: 35bf0000 - 36df0000
ACPI: RSDP 00000000000f8d30 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cffb0000 00038 (v01 A M I OEMRSDT 12000917 MSFT 00000097)
ACPI: FACP 00000000cffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 00000000cffb0440 04D03 (v01 ASRO2 ASRO2361 00000361 INTL 20051117)
ACPI: FACS 00000000cffc0000 00040
ACPI: APIC 00000000cffb0390 0006C (v01 A M I OEMAPIC 12000917 MSFT 00000097)
ACPI: MCFG 00000000cffb0400 0003C (v01 A M I OEMMCFG 12000917 MSFT 00000097)
ACPI: OEMB 00000000cffc0040 0005B (v01 A M I AMI_OEM 12000917 MSFT 00000097)
ACPI: AAFT 00000000cffb5150 00027 (v01 A M I OEMAAFT 12000917 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-00000000cffb0000
Initmem setup node 0 0000000000000000-00000000cffb0000
NODE_DATA [00000000cffab000 - 00000000cffaffff]
[ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800cc200000-ffff8800ceffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cffb0
On node 0 totalpages: 851775
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 11591 pages used for memmap
DMA32 zone: 836201 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:2f380000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8800cfc00000 s79616 r8192 d22784 u524288
pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 840123
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3e4000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 3325508k/3407552k available (6140k kernel code, 452k absent, 81592k reserved, 6894k data, 988k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 27262976 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2692.823 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5385.64 BogoMIPS (lpj=10771292)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110413
ftrace: allocating 25750 entries in 101 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
Brought up 2 CPUs
Total of 2 processors activated (10771.51 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at cffc0000 (196608 bytes)
print_constraints: dummy:
Time: 18:03:18 Date: 04/20/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xd0000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000cd800-0x000d27ff]
pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
pci 0000:00:02.0: [1002:5a34] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [1002:5a36] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
pci 0000:00:12.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:12.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:12.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:12.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:12.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:12.0: reg 24: [mem 0xf9eff800-0xf9effbff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xf9efe000-0xf9efefff]
pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xf9efd000-0xf9efdfff]
pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xf9efc000-0xf9efcfff]
pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
pci 0000:00:13.3: reg 10: [mem 0xf9efb000-0xf9efbfff]
pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
pci 0000:00:13.4: reg 10: [mem 0xf9efa000-0xf9efafff]
pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
pci 0000:00:13.5: reg 10: [mem 0xf9eff000-0xf9eff0ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xf9ef4000-0xf9ef7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:02:00.0: [10de:0605] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xd800-0xd87f]
pci 0000:02:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:03:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io 0xc800-0xc8ff]
pci 0000:01:00.0: reg 18: [mem 0xf9fff000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xf9fc0000-0xf9fdffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 01-01]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:07.0: [1033:00ce] type 0 class 0x000c00
pci 0000:04:07.0: reg 10: [mem 0xfebff000-0xfebfffff]
pci 0000:04:07.0: supports D2
pci 0000:04:07.0: PME# supported from D2 D3hot
pci 0000:04:07.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x0378-0x037f]
pnp 00:05: [io 0x0778-0x077f]
pnp 00:05: [irq 7]
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0062-0x0063]
pnp 00:06: [io 0x0065-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00b1]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x040b]
pnp 00:06: [io 0x04d6]
pnp 00:06: [io 0x0c00-0x0c01]
pnp 00:06: [io 0x0c14]
pnp 00:06: [io 0x0c50-0x0c51]
pnp 00:06: [io 0x0c52]
pnp 00:06: [io 0x0c6c]
pnp 00:06: [io 0x0c6f]
pnp 00:06: [io 0x0cd0-0x0cd1]
pnp 00:06: [io 0x0cd2-0x0cd3]
pnp 00:06: [io 0x0cd4-0x0cd5]
pnp 00:06: [io 0x0cd6-0x0cd7]
pnp 00:06: [io 0x0cd8-0x0cdf]
pnp 00:06: [io 0x0800-0x089f]
pnp 00:06: [io 0x0b10-0x0b1f]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0900-0x090f]
pnp 00:06: [io 0x0910-0x091f]
pnp 00:06: [io 0xfe00-0xfefe]
pnp 00:06: [mem 0xffb80000-0xffbfffff]
pnp 00:06: [mem 0xfff80000-0xffffffff]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b10-0x0b1f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:06: [mem 0xfff80000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: [io 0x0290-0x029f]
system 00:0b: [io 0x0290-0x029f] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0xcfffffff]
pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:04.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 03-03]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:05.0: PCI bridge to [bus 01-01]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
Freeing initrd memory: 18432k freed
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1334944998.672:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 6531
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:05.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: duty_cycle spans bit 4
ERST: Table is not found!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xf9eff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xf9efe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xf9efd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xf9efc000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xf9efb000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xf9efa000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
usb 1-2: new high speed USB device number 2 using ehci_hcd
Magic number: 8:911:89
rtc_cmos 00:02: setting system clock to 2012-04-20 18:03:19 UTC (1334944999)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 988k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 2032k freed
Freeing unused kernel memory: 1464k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
udevd[123]: starting version 173
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9eff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9eff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9effa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf9eff800 port 0xf9effa80 irq 22
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: no MSI. Back to INTx.
r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9000063e000, 74:ea:3a:81:8e:7f, XID 18000000 IRQ 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: no MSI. Back to INTx.
r8169 0000:01:00.0: eth1: RTL8168b/8111b at 0xffffc90000644000, 00:19:66:71:fd:b0, XID 18000000 IRQ 17
Adding 1674208k swap on /dev/zram0. Priority:100 extents:1 across:1674208k SS
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usbcore: registered new interface driver uas
ata5.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB06, max UDMA/33
ata5.00: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr1
sr 4:0:0:0: Attached scsi generic sg2 type 5
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
firewire_ohci 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Initializing USB Mass Storage driver...
scsi6 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
nouveau 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x092280a2)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.92.52.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030
[drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c080
[drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[drm] nouveau 0000:02:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
[drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC441
firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC98C
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD6F4
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD7F2
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDA40
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDAA5
[drm] nouveau 0000:02:00.0: 0xDAA5: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: timingset 255 does not exist
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: memory 900MHz core 600MHz shader 1500MHz fanspeed 100%
[drm] nouveau 0000:02:00.0: c: memory 499MHz core 399MHz shader 810MHz voltage 1100mV
[TTM] Zone kernel: Available graphics memory: 1674212 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x40000000, bo ffff880036bf9000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
firewire_core: created device fw0: GUID 00004c0100000c7e, S400
Btrfs loaded
xor: automatically using best checksumming function: generic_sse
generic_sse: 8401.000 MB/sec
xor: using function: generic_sse (8401.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
raid6: int64x1 2241 MB/s
raid6: int64x2 3119 MB/s
raid6: int64x4 2029 MB/s
scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.20 PQ: 0 ANSI: 5
raid6: int64x8 1927 MB/s
raid6: sse2x1 3697 MB/s
raid6: sse2x2 4951 MB/s
raid6: sse2x4 5131 MB/s
raid6: using algorithm sse2x4 (5131 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): mounted filesystem with ordered data mode
udevd[457]: starting version 173
lp: driver loaded but no devices found
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
udevd[475]: renamed network interface eth1 to rename3
udevd[497]: renamed network interface eth0 to eth2
ppdev: user-space parallel port driver
udevd[475]: renamed network interface rename3 to eth0
lp0: using parport0 (interrupt-driven).
MCE: In-kernel MCE decoding enabled.
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EXT3-fs (sdb1): using internal journal
type=1400 audit(1334937804.129:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=651 comm="apparmor_parser"
type=1400 audit(1334937804.129:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
type=1400 audit(1334937804.129:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=651 comm="apparmor_parser"
type=1400 audit(1334937804.129:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
type=1400 audit(1334937804.129:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=651 comm="apparmor_parser"
type=1400 audit(1334937804.129:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
type=1400 audit(1334937804.129:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
type=1400 audit(1334937804.129:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
type=1400 audit(1334937804.129:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC662 rev1: BIOS auto-probing.
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): using internal journal
EXT3-fs (loop0): mounted filesystem with ordered data mode
type=1400 audit(1334937809.397:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=942 comm="apparmor_parser"
type=1400 audit(1334937809.397:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=942 comm="apparmor_parser"
type=1400 audit(1334937809.877:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=962 comm="apparmor_parser"
type=1400 audit(1334937809.877:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=962 comm="apparmor_parser"
type=1400 audit(1334937809.877:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=962 comm="apparmor_parser"
type=1400 audit(1334937809.881:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=965 comm="apparmor_parser"
type=1400 audit(1334937809.881:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=965 comm="apparmor_parser"
type=1400 audit(1334937810.009:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=964 comm="apparmor_parser"
type=1400 audit(1334937810.013:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=964 comm="apparmor_parser"
type=1400 audit(1334937810.017:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=964 comm="apparmor_parser"
r8169 0000:03:00.0: eth2: link down
r8169 0000:03:00.0: eth2: link down
ADDRCONF(NETDEV_UP): eth2: link is not ready
r8169 0000:01:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
init: failsafe main process (887) killed by TERM signal
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
r8169 0000:03:00.0: eth2: link up
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
init: plymouth-stop pre-start process (1367) terminated with status 1
eth2: no IPv6 routers present
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling
[drm] nouveau 0000:02:00.0: No native mode, forcing panel scaling