dmesg - x5560-2way-memory
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:23:16 UTC 2011
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf7c0000 (usable)
BIOS-e820: 00000000bf7c0000 - 00000000bf7dd000 (ACPI data)
BIOS-e820: 00000000bf7dd000 - 00000000bf7de000 (ACPI NVS)
BIOS-e820: 00000000bf7de000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000c40000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xc40000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask FFC0000000 uncachable
1 base 0000000000 mask F800000000 write-back
2 base 0800000000 mask FC00000000 write-back
3 base 0C00000000 mask FFC0000000 write-back
4 base 00BF800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf7c0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf7c0000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf7c0000 page 4k
kernel direct mapping tables up to bf7c0000 @ 10000-15000
init_memory_mapping: 0000000100000000-0000000c40000000
0100000000 - 0c40000000 page 2M
kernel direct mapping tables up to c40000000 @ 13000-45000
RAMDISK: 37722000 - 37feff81
ACPI: RSDP 00000000000f6930 00024 (v02 PTLTD )
ACPI: XSDT 00000000bf7d679a 00084 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 00000000bf7dc934 000F4 (v03 NEC 04CF 06040000 PTL 00000002)
ACPI: DSDT 00000000bf7d681e 06092 (v01 NEC 04CF 06040000 MSFT 03000001)
ACPI: FACS 00000000bf7ddfc0 00040
ACPI: SPPM 00000000bf7dca28 00024 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: SLIT 00000000bf7dca4c 00030 (v01 NEC 04CF 06040000 LOHR 0000005A)
ACPI: TCPA 00000000bf7dca7c 00032 (v01 NEC 04CF 06040000 LOHR 0000005A)
ACPI: SRAT 00000000bf7dcaae 00180 (v01 Intel Tylerbrg 06040000 PHX. 00000001)
ACPI: DMAR 00000000bf7dcc2e 001D0 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: APIC 00000000bf7dcdfe 00136 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 00000000bf7dcf34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 00000000bf7dcf70 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: BOOT 00000000bf7dcfa8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: BERT 00000000bf7dcfd0 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
ACPI: SSDT 00000000bf7ce752 06B01 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
SRAT: Node 0 PXM 0 0-c0000000
SRAT: Node 0 PXM 0 100000000-c40000000
NUMA: Using 32 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000c40000000
NODE_DATA [0000000000040040 - 000000000004803f]
bootmap [0000000000100000 - 0000000000287fff] pages 188
(9 early reservations) ==> bootmem [0000000000 - 0c40000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000168c494] TEXT DATA BSS ==> [0001000000 - 000168c494]
#3 [0037722000 - 0037feff81] RAMDISK ==> [0037722000 - 0037feff81]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000168d000 - 000168d254] BRK ==> [000168d000 - 000168d254]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000040000] PGTABLE ==> [0000013000 - 0000040000]
#8 [0000040000 - 0000040030] ACPI SLIT ==> [0000040000 - 0000040030]
found SMP MP-table at [ffff8800000f6960] f6960
[ffffea0000000000-ffffea001f5fffff] PMD -> [ffff880001800000-ffff88001fffffff] on node 0
[ffffea001f600000-ffffea002adfffff] PMD -> [ffff880028600000-ffff880033dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00c40000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bf7c0
0: 0x00100000 -> 0x00c40000
On node 0 totalpages: 12580684
DMA zone: 56 pages used for memmap
DMA zone: 150 pages reserved
DMA zone: 3774 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765944 pages, LIFO batch:31
Normal zone: 161280 pages used for memmap
Normal zone: 11635200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf7c0000 - 00000000bf7dd000
PM: Registered nosave memory: 00000000bf7dd000 - 00000000bf7de000
PM: Registered nosave memory: 00000000bf7de000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s90328 r8192 d24360 u131072
pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12404918
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 49550384k/51380224k available (3080k kernel code, 1057488k absent, 772352k reserved, 1898k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:536
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.320 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.64 BogoMIPS (lpj=10665280)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fe710000 flags: 0x1
IOMMU fe710000: ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: RMRR base: 0x000000bf7e1000 end: 0x000000bf7fffff
DMAR: RMRR base: 0x000000bf7f8000 end: 0x000000bf7f8fff
DMAR: RMRR base: 0x000000bf7f9000 end: 0x000000bf7f9fff
DMAR: RMRR base: 0x000000bf7fe000 end: 0x000000bf7fefff
DMAR: RMRR base: 0x000000bf7fa000 end: 0x000000bf7fafff
DMAR: RMRR base: 0x000000bf7fb000 end: 0x000000bf7fbfff
DMAR: RMRR base: 0x000000bf7fc000 end: 0x000000bf7fcfff
DMAR: RMRR base: 0x000000bf7fd000 end: 0x000000bf7fdfff
DMAR: RMRR base: 0x000000bf7ff000 end: 0x000000bf7fffff
DMAR: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xfe710000
Enabled Interrupt-remapping
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x2 -> Node 0
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x4 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x6 -> Node 0
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x10 ip 0x6000
Initializing CPU#4
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x10 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
CPU4: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x12 ip 0x6000
Initializing CPU#5
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x12 -> Node 0
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU5: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x14 ip 0x6000
Initializing CPU#6
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x14 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU6: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x16 ip 0x6000
Initializing CPU#7
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x16 -> Node 0
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU7: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Booting processor 8 APIC 0x1 ip 0x6000
Initializing CPU#8
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 8/0x1 -> Node 0
CPU8: Thermal monitoring enabled (TM1)
CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU8: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#8]: passed.
Booting processor 9 APIC 0x3 ip 0x6000
Initializing CPU#9
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 9/0x3 -> Node 0
CPU9: Thermal monitoring enabled (TM1)
CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU9: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#9]: passed.
Booting processor 10 APIC 0x5 ip 0x6000
Initializing CPU#10
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 10/0x5 -> Node 0
CPU10: Thermal monitoring enabled (TM1)
CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU10: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#10]: passed.
Booting processor 11 APIC 0x7 ip 0x6000
Initializing CPU#11
Enabling x2apic
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 11/0x7 -> Node 0
CPU11: Thermal monitoring enabled (TM1)
CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU11: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#11]: passed.
Booting processor 12 APIC 0x11 ip 0x6000
Initializing CPU#12
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 12/0x11 -> Node 0
CPU12: Thermal monitoring enabled (TM1)
CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU12: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#12]: passed.
Booting processor 13 APIC 0x13 ip 0x6000
Initializing CPU#13
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 13/0x13 -> Node 0
CPU13: Thermal monitoring enabled (TM1)
CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU13: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#13]: passed.
Booting processor 14 APIC 0x15 ip 0x6000
Initializing CPU#14
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 14/0x15 -> Node 0
CPU14: Thermal monitoring enabled (TM1)
CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU14: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#14]: passed.
Booting processor 15 APIC 0x17 ip 0x6000
Initializing CPU#15
Enabling x2apic
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 15/0x17 -> Node 0
CPU15: Thermal monitoring enabled (TM1)
CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU15: Genuine Intel(R) CPU @ 0000 @ 2.67GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#15]: passed.
Brought up 16 CPUs
Total of 16 processors activated (85333.03 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 0 (cpu_power = 589) 8 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU1 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 1 (cpu_power = 589) 9 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU2 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 2 (cpu_power = 589) 10 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU3 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 3 (cpu_power = 589) 11 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU4 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 4 (cpu_power = 589) 12 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU5 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 5 (cpu_power = 589) 13 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU6 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 6 (cpu_power = 589) 14 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU7 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 7 (cpu_power = 589) 15 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU8 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 8 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU9 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 9 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU10 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 10 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU11 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 11 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3,8-11 level MC
groups: 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU12 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 12 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU13 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 13 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU14 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 14 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
CPU15 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 15 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 4-7,12-15 level MC
groups: 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level CPU
groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712)
domain 3: span 0-15 level NODE
groups: 0-15 (cpu_power = 9424)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xfe000000-0xfe003fff]
pci 0000:00:16.1: reg 10 64bit mmio: [0xfe004000-0xfe007fff]
pci 0000:00:16.2: reg 10 64bit mmio: [0xfe008000-0xfe00bfff]
pci 0000:00:16.3: reg 10 64bit mmio: [0xfe00c000-0xfe00ffff]
pci 0000:00:16.4: reg 10 64bit mmio: [0xfe010000-0xfe013fff]
pci 0000:00:16.5: reg 10 64bit mmio: [0xfe014000-0xfe017fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0xfe018000-0xfe01bfff]
pci 0000:00:16.7: reg 10 64bit mmio: [0xfe01c000-0xfe01ffff]
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdfc00000-0xdfc003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.3: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfc01000-0xdfc013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca4 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xdfc02000-0xdfc027ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xdfc03000-0xdfc030ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xdf940000-0xdf95ffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xdf920000-0xdf93ffff]
pci 0000:01:00.0: reg 18 io port: [0x2000-0x201f]
pci 0000:01:00.0: reg 1c 32bit mmio: [0xdf9c0000-0xdf9c3fff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 10 32bit mmio: [0xdf9a0000-0xdf9bffff]
pci 0000:01:00.1: reg 14 32bit mmio: [0xdf980000-0xdf99ffff]
pci 0000:01:00.1: reg 18 io port: [0x2020-0x203f]
pci 0000:01:00.1: reg 1c 32bit mmio: [0xdf9c4000-0xdf9c7fff]
pci 0000:01:00.1: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xdf900000-0xdf9fffff]
pci 0000:21:00.0: reg 10 32bit mmio pref: [0xde000000-0xdeffffff]
pci 0000:21:00.0: reg 14 32bit mmio: [0xdf810000-0xdf813fff]
pci 0000:21:00.0: reg 18 32bit mmio: [0xdf000000-0xdf7fffff]
pci 0000:21:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:21:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge 32bit mmio: [0xdf000000-0xdf8fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xde000000-0xdeffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *6 7 10 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 *7 10 12)
vgaarb: device added: PCI:0000:21:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1180-0x11bf has been reserved
system 00:01: ioport range 0xfe00-0xfe00 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:01: iomem range 0xfe800000-0xfe9fffff has been reserved
system 00:01: iomem range 0xfeb00000-0xfebfffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:01:00.1: BAR 10: can't allocate mem resource [0xdf9e8000-0xdf9fffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xdf900000-0xdf9fffff
pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc00fffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:09
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:15
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:1b
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xc0100000-0xc02fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c0300000-0x000000c04fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:21
pci 0000:00:1c.4: IO window: 0x4000-0x4fff
pci 0000:00:1c.4: MEM window: 0xdf000000-0xdf8fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000de000000-0x000000deffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:22
pci 0000:00:1c.5: IO window: 0x5000-0x5fff
pci 0000:00:1c.5: MEM window: 0xc0500000-0xc06fffff
pci 0000:00:1c.5: PREFETCH window: 0x000000c0700000-0x000000c08fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:23
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xdf900000-0xdf9fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc00fffff]
pci_bus 0000:1b: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:1b: resource 1 mem: [0xc0100000-0xc02fffff]
pci_bus 0000:1b: resource 2 pref mem [0xc0300000-0xc04fffff]
pci_bus 0000:21: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:21: resource 1 mem: [0xdf000000-0xdf8fffff]
pci_bus 0000:21: resource 2 pref mem [0xde000000-0xdeffffff]
pci_bus 0000:22: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:22: resource 1 mem: [0xc0500000-0xc06fffff]
pci_bus 0000:22: resource 2 pref mem [0xc0700000-0xc08fffff]
pci_bus 0000:23: resource 3 io: [0x00-0xffff]
pci_bus 0000:23: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:21:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9015k freed
Simple Boot Flag at 0x40 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1334283338.708:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 26 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:05.0: irq 27 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 28 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:09.0: irq 29 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Warning: Keylock active.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2012-04-13 02:15:39 UTC (1334283339)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
udev[196]: starting version 164
dca service started, version 1.12.1
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
Copyright (c) 2007-2009 Intel Corporation.
igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.0: irq 41 for MSI/MSI-X
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xdfc00000
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdfc02000 port 0xdfc02100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xdfc02000 port 0xdfc02180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xdfc02000 port 0xdfc02200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xdfc02000 port 0xdfc02280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xdfc02000 port 0xdfc02300 irq 42
ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 42
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdfc01000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 23, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:1f:d0:da:bd:14
igb 0000:01:00.0: eth0: PBA No: ffffff-0ff
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:01:00.1: setting latency timer to 64
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 46 for MSI/MSI-X
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:01:00.1: irq 51 for MSI/MSI-X
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:1f:d0:da:bd:15
igb 0000:01:00.1: eth1: PBA No: ffffff-0ff
igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=0000, idProduct=0000
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: SE USB Device
usb 5-1: Manufacturer: ServerEngines
usb 5-1: SerialNumber: 6013151660470A
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input1
generic-usb 0003:0000:0000.0001: input,hidraw0: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input0
input: ServerEngines SE USB Device as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input2
generic-usb 0003:0000:0000.0002: input,hidraw1: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-7: SAMSUNG SP0411C/R, UU100-05, max UDMA7
ata6.00: 78242976 sectors, multi 0: LBA48
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SAMSUNG SP0411C/ UU10 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 5:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Resume from partition 8:2
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode
udev[534]: starting version 164
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ioatdma 0000:00:16.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: irq 52 for MSI/MSI-X
ioatdma 0000:00:16.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ioatdma 0000:00:16.1: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: irq 53 for MSI/MSI-X
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ioatdma 0000:00:16.2: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: irq 54 for MSI/MSI-X
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ioatdma 0000:00:16.3: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: irq 55 for MSI/MSI-X
ioatdma 0000:00:16.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ioatdma 0000:00:16.4: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.4: irq 56 for MSI/MSI-X
ioatdma 0000:00:16.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ioatdma 0000:00:16.5: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.5: irq 57 for MSI/MSI-X
ioatdma 0000:00:16.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ioatdma 0000:00:16.6: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.6: irq 58 for MSI/MSI-X
ioatdma 0000:00:16.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ioatdma 0000:00:16.7: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.7: irq 59 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input5
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Error: Driver 'pcspkr' is already registered, aborting...
SPL: Loaded module v0.6.0, using hostid 0x00000000
zunicode: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.0, ZFS pool version 28, ZFS filesystem version 5
Adding 996344k swap on /dev/sda2. Priority:-1 extents:1 across:996344k
loop: module loaded
ADDRCONF(NETDEV_UP): eth0: link is not ready
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready