dmesg - 033012
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable)
[ 0.000000] BIOS-e820: 00000000d7fd0000 - 00000000d7fe5600 (reserved)
[ 0.000000] BIOS-e820: 00000000d7fe5600 - 00000000d7ff8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7ff8000 - 00000000d8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq nc6400 (RH300UP#ABA)/30AC, BIOS 68YCD Ver. F.0B 09/05/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xd7fd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF8000000 write-back
[ 0.000000] 4 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 4175488KB, range: 128KB, type UC
[ 0.000000] total RAM covered: 3456M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365ea000 - 372ed000
[ 0.000000] ACPI: RSDP 000f7870 00024 (v02 HP )
[ 0.000000] ACPI: XSDT d7fe57c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP d7fe5684 000F4 (v04 HP 30AC 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT d7fe5acc 104BB (v01 HP nc6400 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS d7ff7e80 00040
[ 0.000000] ACPI: SLIC d7fe5844 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET d7fe59bc 00038 (v01 HP 30AC 00000001 HP 00000001)
[ 0.000000] ACPI: APIC d7fe59f4 00068 (v01 HP 30AC 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG d7fe5a5c 0003C (v01 HP 30AC 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA d7fe5a98 00032 (v02 HP 30AC 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT d7ff5f87 00059 (v01 HP HPQNLP 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT d7ff5fe0 0032D (v01 HP HPQSAT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT d7ff6b20 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT d7ff6d7f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT d7ff6e25 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2567MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000d7fd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000d7fd0
[ 0.000000] On node 0 totalpages: 884575
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f4aea200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 5136 pages used for memmap
[ 0.000000] HighMem zone: 652226 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d8000000 (gap: d8000000:26c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4400000 s26240 r0 d22912 u2097152
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 877663
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 14154752 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000d7fd0)
[ 0.000000] Memory: 3472980k/3538752k available (5340k kernel code, 65320k reserved, 2595k data, 696k init, 2629448k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc15371c4 - 0xc17c0140 (2595 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15371c4 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.925 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.85 BogoMIPS (lpj=7315700)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004054] AppArmor: AppArmor initialized
[ 0.004056] Yama: becoming mindful.
[ 0.004122] Mount-cache hash table entries: 512
[ 0.004280] Initializing cgroup subsys cpuacct
[ 0.004288] Initializing cgroup subsys memory
[ 0.004298] Initializing cgroup subsys devices
[ 0.004301] Initializing cgroup subsys freezer
[ 0.004304] Initializing cgroup subsys net_cls
[ 0.004307] Initializing cgroup subsys blkio
[ 0.004316] Initializing cgroup subsys perf_event
[ 0.004348] Disabled fast string operations
[ 0.004355] CPU: Physical Processor ID: 0
[ 0.004357] CPU: Processor Core ID: 0
[ 0.004361] mce: CPU supports 6 MCE banks
[ 0.004371] CPU0: Thermal monitoring handled by SMI
[ 0.004375] using mwait in idle threads.
[ 0.009997] ACPI: Core revision 20110413
[ 0.020011] ftrace: allocating 24903 entries in 49 pages
[ 0.024064] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067696] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.068003] Performance Events: Core events, core PMU driver.
[ 0.068003] ... version: 1
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 0000000000000003
[ 0.068003] CPU 1 irqstacks, hard=f30ca000 soft=f30cc000
[ 0.068003] Booting Node 0, Processors #1 Ok.
[ 0.068003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.156027] Brought up 2 CPUs
[ 0.156031] Total of 2 processors activated (7315.31 BogoMIPS).
[ 0.157132] devtmpfs: initialized
[ 0.157132] PM: Registering ACPI NVS region at d7fe5600 (76288 bytes)
[ 0.157132] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.160087] print_constraints: dummy:
[ 0.160123] Time: 1:43:53 Date: 03/31/12
[ 0.160175] NET: Registered protocol family 16
[ 0.160211] Trying to unpack rootfs image as initramfs...
[ 0.160337] EISA bus registered
[ 0.160348] ACPI: bus type pci registered
[ 0.160423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.160427] PCI: not using MMCONFIG
[ 0.161595] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[ 0.161598] PCI: Using configuration type 1 for base access
[ 0.162869] bio: create slab at 0
[ 0.165510] ACPI: EC: Look up EC in DSDT
[ 0.251874] ACPI: SSDT d7ff63d5 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.252509] ACPI: Dynamic OEM Table Load:
[ 0.252514] ACPI: SSDT (null) 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.252671] ACPI: SSDT d7ff6655 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.253264] ACPI: Dynamic OEM Table Load:
[ 0.253268] ACPI: SSDT (null) 004CB (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.253532] ACPI: SSDT d7ff630d 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.254136] ACPI: Dynamic OEM Table Load:
[ 0.254140] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.254244] ACPI: SSDT d7ff65d0 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.254838] ACPI: Dynamic OEM Table Load:
[ 0.254842] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.268116] ACPI: Interpreter enabled
[ 0.268129] ACPI: (supports S0 S3 S4 S5)
[ 0.268154] ACPI: Using IOAPIC for interrupt routing
[ 0.268193] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.268908] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.268912] PCI: Using MMCONFIG for extended config space
[ 0.269405] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.272070] ACPI: Power Resource [C1F5] (on)
[ 0.272565] ACPI: Power Resource [C1FC] (on)
[ 0.312359] ACPI: Power Resource [C219] (on)
[ 0.315551] ACPI: Power Resource [C221] (on)
[ 0.322370] ACPI: Power Resource [C32A] (off)
[ 0.322447] ACPI: Power Resource [C32B] (off)
[ 0.322524] ACPI: Power Resource [C32C] (off)
[ 0.322604] ACPI: Power Resource [C32D] (off)
[ 0.322679] ACPI: Power Resource [C32E] (off)
[ 0.322759] ACPI: Power Resource [C32F] (off)
[ 0.322839] ACPI: Power Resource [C330] (off)
[ 0.322914] ACPI: Power Resource [C331] (off)
[ 0.322993] ACPI: Power Resource [C332] (off)
[ 0.323069] ACPI: Power Resource [C333] (off)
[ 0.323120] ACPI: Power Resource [C334] (off)
[ 0.325271] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.325588] ACPI: No dock devices found.
[ 0.325591] HEST: Table not found.
[ 0.325598] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.329099] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[ 0.336095] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.336100] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.336103] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.336107] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xfedfffff] (ignored)
[ 0.336111] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
[ 0.336115] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.336130] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.336188] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.336240] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.336245] pci 0000:00:01.0: PME# disabled
[ 0.336312] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.336337] pci 0000:00:1b.0: reg 10: [mem 0xe4700000-0xe4703fff 64bit]
[ 0.336446] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.336452] pci 0000:00:1b.0: PME# disabled
[ 0.336482] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.336596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.336602] pci 0000:00:1c.0: PME# disabled
[ 0.336635] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.336748] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.336754] pci 0000:00:1c.1: PME# disabled
[ 0.336789] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.336904] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.336910] pci 0000:00:1c.3: PME# disabled
[ 0.336944] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.337002] pci 0000:00:1d.0: reg 20: [io 0x5000-0x501f]
[ 0.337047] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.337105] pci 0000:00:1d.1: reg 20: [io 0x5020-0x503f]
[ 0.337150] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.337208] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f]
[ 0.337254] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.337313] pci 0000:00:1d.3: reg 20: [io 0x5060-0x507f]
[ 0.337369] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.337395] pci 0000:00:1d.7: reg 10: [mem 0xe4704000-0xe47043ff]
[ 0.337506] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.337512] pci 0000:00:1d.7: PME# disabled
[ 0.337540] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.337641] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.337760] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.337768] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
[ 0.337774] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.337779] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 000f)
[ 0.337787] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
[ 0.337846] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.337863] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.337877] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.337890] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.337903] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.337916] pci 0000:00:1f.1: reg 20: [io 0x5080-0x508f]
[ 0.337969] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[ 0.337995] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
[ 0.338009] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
[ 0.338022] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
[ 0.338036] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
[ 0.338049] pci 0000:00:1f.2: reg 20: [io 0x50b0-0x50bf]
[ 0.338062] pci 0000:00:1f.2: reg 24: [mem 0xe4705000-0xe47053ff]
[ 0.338121] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.338126] pci 0000:00:1f.2: PME# disabled
[ 0.338203] pci 0000:01:00.0: [1002:714a] type 0 class 0x000300
[ 0.338228] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.338245] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff]
[ 0.338261] pci 0000:01:00.0: reg 18: [mem 0xe4600000-0xe460ffff]
[ 0.338312] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.338391] pci 0000:01:00.0: supports D1 D2
[ 0.338425] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.338442] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.338447] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.338451] pci 0000:00:01.0: bridge window [mem 0xe4600000-0xe46fffff]
[ 0.338457] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.338646] pci 0000:08:00.0: [14e4:16fd] type 0 class 0x000200
[ 0.338739] pci 0000:08:00.0: reg 10: [mem 0xe4100000-0xe410ffff 64bit]
[ 0.339238] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 0.339254] pci 0000:08:00.0: PME# disabled
[ 0.339332] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.339359] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.339365] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.339371] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.339380] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.339544] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280
[ 0.339601] pci 0000:10:00.0: reg 10: [mem 0xe4000000-0xe4000fff]
[ 0.340037] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.340051] pci 0000:10:00.0: PME# disabled
[ 0.340123] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.340152] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.340158] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.340164] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff]
[ 0.340174] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.340238] pci 0000:00:1c.3: PCI bridge to [bus 20-20]
[ 0.340244] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff]
[ 0.340250] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe3ffffff]
[ 0.340259] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.340323] pci 0000:02:06.0: [104c:8039] type 2 class 0x000607
[ 0.340352] pci 0000:02:06.0: reg 10: [mem 0xe4200000-0xe4200fff]
[ 0.340402] pci 0000:02:06.0: supports D1 D2
[ 0.340405] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.340412] pci 0000:02:06.0: PME# disabled
[ 0.340442] pci 0000:02:06.2: [104c:803b] type 0 class 0x000180
[ 0.340471] pci 0000:02:06.2: reg 10: [mem 0xe4208000-0xe4208fff]
[ 0.340599] pci 0000:02:06.2: supports D1 D2
[ 0.340602] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.340609] pci 0000:02:06.2: PME# disabled
[ 0.340636] pci 0000:02:06.3: [104c:803c] type 0 class 0x000805
[ 0.340664] pci 0000:02:06.3: reg 10: [mem 0xe4209000-0xe42090ff]
[ 0.340793] pci 0000:02:06.3: supports D1 D2
[ 0.340796] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[ 0.340802] pci 0000:02:06.3: PME# disabled
[ 0.340829] pci 0000:02:06.4: [104c:803d] type 0 class 0x000780
[ 0.340859] pci 0000:02:06.4: reg 10: [mem 0xe420a000-0xe420afff]
[ 0.340876] pci 0000:02:06.4: reg 14: [mem 0xe420b000-0xe420bfff]
[ 0.340990] pci 0000:02:06.4: supports D1 D2
[ 0.340993] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
[ 0.341000] pci 0000:02:06.4: PME# disabled
[ 0.341068] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.341074] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.341081] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
[ 0.341090] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.341094] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.341097] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.341157] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.341192] pci_bus 0000:00: on NUMA node 0
[ 0.341201] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.341391] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C084._PRT]
[ 0.341433] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C099._PRT]
[ 0.341544] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C102._PRT]
[ 0.341609] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C112._PRT]
[ 0.341673] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C118._PRT]
[ 0.341780] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.341785] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.341788] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.355146] ACPI: PCI Interrupt Link [C10E] (IRQs *10 11)
[ 0.355249] ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
[ 0.355347] ACPI: PCI Interrupt Link [C110] (IRQs 10 *11)
[ 0.355445] ACPI: PCI Interrupt Link [C111] (IRQs 10 11) *5
[ 0.355542] ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
[ 0.355639] ACPI: PCI Interrupt Link [C125] (IRQs *10 11)
[ 0.355736] ACPI: PCI Interrupt Link [C126] (IRQs 10 *11)
[ 0.355780] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110413/pci_link-184)
[ 0.355945] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.355953] vgaarb: loaded
[ 0.355955] vgaarb: bridge control possible 0000:01:00.0
[ 0.356264] SCSI subsystem initialized
[ 0.356354] libata version 3.00 loaded.
[ 0.356417] usbcore: registered new interface driver usbfs
[ 0.356432] usbcore: registered new interface driver hub
[ 0.356469] usbcore: registered new device driver usb
[ 0.356585] PCI: Using ACPI for IRQ routing
[ 0.357735] PCI: pci_cache_line_size set to 64 bytes
[ 0.357862] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.357865] reserve RAM buffer: 00000000d7fd0000 - 00000000d7ffffff
[ 0.357992] NetLabel: Initializing
[ 0.357994] NetLabel: domain hash size = 128
[ 0.357997] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.358010] NetLabel: unlabeled traffic allowed by default
[ 0.358061] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.358069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.358076] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.364085] Switching to clocksource hpet
[ 0.367873] Switched to NOHz mode on CPU #0
[ 0.367926] Switched to NOHz mode on CPU #1
[ 0.373553] AppArmor: AppArmor Filesystem Enabled
[ 0.373592] pnp: PnP ACPI init
[ 0.373615] ACPI: bus type pnp registered
[ 0.373748] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.373752] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.373755] pnp 00:00: [mem 0x00100000-0xd7ffffff]
[ 0.373827] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.373832] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.373836] system 00:00: [mem 0x00100000-0xd7ffffff] could not be reserved
[ 0.373841] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.377350] pnp 00:01: [bus 00-ff]
[ 0.377355] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.377358] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.377361] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.377364] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.377368] pnp 00:01: [mem 0xd8000000-0xfedfffff window]
[ 0.377371] pnp 00:01: [mem 0xfee01000-0xffffffff window]
[ 0.377374] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[ 0.377512] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.378160] pnp 00:02: [io 0x03e8-0x03ef]
[ 0.378167] pnp 00:02: [io 0x0100-0x010f]
[ 0.378181] pnp 00:02: [irq 7]
[ 0.378184] pnp 00:02: [dma 3]
[ 0.378273] pnp 00:02: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[ 0.378762] pnp 00:03: [io 0x0378-0x037f]
[ 0.378766] pnp 00:03: [io 0x0778-0x077a]
[ 0.378769] pnp 00:03: [irq 7]
[ 0.378772] pnp 00:03: [dma 1]
[ 0.378880] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.378967] pnp 00:04: [io 0x0560-0x056f]
[ 0.378970] pnp 00:04: [io 0x0570-0x057f]
[ 0.378973] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[ 0.379015] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.379028] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.379035] pnp 00:05: [irq 13]
[ 0.379076] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.379091] pnp 00:06: [io 0x0000-0x000f]
[ 0.379093] pnp 00:06: [io 0x0080-0x008f]
[ 0.379096] pnp 00:06: [io 0x00c0-0x00df]
[ 0.379099] pnp 00:06: [dma 4]
[ 0.379136] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.379147] pnp 00:07: [io 0x0061]
[ 0.379184] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.379196] pnp 00:08: [io 0x0070-0x0071]
[ 0.379199] pnp 00:08: [io 0x0072-0x0073]
[ 0.379206] pnp 00:08: [irq 8]
[ 0.379243] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.379322] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.379362] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.379378] pnp 00:0a: [io 0x0060]
[ 0.379380] pnp 00:0a: [io 0x0064]
[ 0.379387] pnp 00:0a: [irq 1]
[ 0.379427] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.379442] pnp 00:0b: [irq 12]
[ 0.379487] pnp 00:0b: Plug and Play ACPI device, IDs SYN0122 SYN0100 SYN0002 PNP0f13 (active)
[ 0.379624] pnp 00:0c: [io 0x0010-0x001f]
[ 0.379628] pnp 00:0c: [io 0x0024-0x003f]
[ 0.379631] pnp 00:0c: [io 0x004e-0x004f]
[ 0.379633] pnp 00:0c: [io 0x0050-0x0053]
[ 0.379636] pnp 00:0c: [io 0x0063]
[ 0.379639] pnp 00:0c: [io 0x0065]
[ 0.379641] pnp 00:0c: [io 0x0067]
[ 0.379644] pnp 00:0c: [io 0x0074-0x0077]
[ 0.379647] pnp 00:0c: [io 0x0090-0x009f]
[ 0.379650] pnp 00:0c: [io 0x00a4-0x00bd]
[ 0.379653] pnp 00:0c: [io 0x0500-0x055f]
[ 0.379655] pnp 00:0c: [io 0x0800-0x080f]
[ 0.379658] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[ 0.379662] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.379744] system 00:0c: [io 0x0500-0x055f] has been reserved
[ 0.379748] system 00:0c: [io 0x0800-0x080f] has been reserved
[ 0.379753] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.379757] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.379761] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380416] pnp 00:0d: [irq 23]
[ 0.380488] pnp 00:0d: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.380515] pnp 00:0e: [io 0x04d0-0x04d1]
[ 0.380519] pnp 00:0e: [io 0x1000-0x107f]
[ 0.380521] pnp 00:0e: [io 0x1100-0x113f]
[ 0.380524] pnp 00:0e: [io 0x1200-0x121f]
[ 0.380527] pnp 00:0e: [mem 0xf8000000-0xfbffffff]
[ 0.380530] pnp 00:0e: [mem 0xfec00000-0xfec000ff]
[ 0.380533] pnp 00:0e: [mem 0xfed20000-0xfed3ffff]
[ 0.380536] pnp 00:0e: [mem 0xfed45000-0xfed8ffff]
[ 0.380539] pnp 00:0e: [mem 0xfed90000-0xfed9afff]
[ 0.380634] system 00:0e: [io 0x04d0-0x04d1] has been reserved
[ 0.380638] system 00:0e: [io 0x1000-0x107f] has been reserved
[ 0.380642] system 00:0e: [io 0x1100-0x113f] has been reserved
[ 0.380646] system 00:0e: [io 0x1200-0x121f] has been reserved
[ 0.380650] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.380654] system 00:0e: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.380658] system 00:0e: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.380662] system 00:0e: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.380665] system 00:0e: [mem 0xfed90000-0xfed9afff] has been reserved
[ 0.380670] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381583] pnp 00:0f: [mem 0x000cfc00-0x000cffff]
[ 0.381586] pnp 00:0f: [mem 0xfeda0000-0xfedbffff]
[ 0.381590] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[ 0.381688] system 00:0f: [mem 0x000cfc00-0x000cffff] has been reserved
[ 0.381692] system 00:0f: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.381696] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.381700] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.381735] pnp: PnP ACPI: found 16 devices
[ 0.381738] ACPI: ACPI bus type pnp unregistered
[ 0.381743] PnPBIOS: Disabled by ACPI PNP
[ 0.418404] PCI: max bus depth: 2 pci_try_num: 3
[ 0.418480] pci 0000:00:1e.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
[ 0.418486] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.418492] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe4800000-0xe49fffff 64bit pref]
[ 0.418499] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe4a00000-0xe4bfffff 64bit pref]
[ 0.418503] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.418510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe4c00000-0xe4dfffff 64bit pref]
[ 0.418514] pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.418519] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4620000-0xe463ffff pref]
[ 0.418523] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.418527] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.418533] pci 0000:00:01.0: bridge window [mem 0xe4600000-0xe46fffff]
[ 0.418537] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.418544] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 0.418548] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
[ 0.418556] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.418562] pci 0000:00:1c.0: bridge window [mem 0xe4c00000-0xe4dfffff 64bit pref]
[ 0.418571] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
[ 0.418576] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
[ 0.418583] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff]
[ 0.418590] pci 0000:00:1c.1: bridge window [mem 0xe4a00000-0xe4bfffff 64bit pref]
[ 0.418599] pci 0000:00:1c.3: PCI bridge to [bus 20-20]
[ 0.418603] pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff]
[ 0.418611] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe3ffffff]
[ 0.418617] pci 0000:00:1c.3: bridge window [mem 0xe4800000-0xe49fffff 64bit pref]
[ 0.418628] pci 0000:02:06.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
[ 0.418635] pci 0000:02:06.0: BAR 16: assigned [mem 0xec000000-0xefffffff]
[ 0.418639] pci 0000:02:06.0: BAR 13: assigned [io 0x6000-0x60ff]
[ 0.418642] pci 0000:02:06.0: BAR 14: assigned [io 0x6400-0x64ff]
[ 0.418646] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[ 0.418649] pci 0000:02:06.0: bridge window [io 0x6000-0x60ff]
[ 0.418656] pci 0000:02:06.0: bridge window [io 0x6400-0x64ff]
[ 0.418663] pci 0000:02:06.0: bridge window [mem 0xe8000000-0xebffffff pref]
[ 0.418670] pci 0000:02:06.0: bridge window [mem 0xec000000-0xefffffff]
[ 0.418678] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.418682] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
[ 0.418690] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
[ 0.418696] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xebffffff pref]
[ 0.418726] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.418732] pci 0000:00:01.0: setting latency timer to 64
[ 0.418741] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.418747] pci 0000:00:1c.0: setting latency timer to 64
[ 0.418760] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.418766] pci 0000:00:1c.1: setting latency timer to 64
[ 0.418779] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.418785] pci 0000:00:1c.3: setting latency timer to 64
[ 0.418794] pci 0000:00:1e.0: setting latency timer to 64
[ 0.418809] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.418818] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.418821] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.418825] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.418828] pci_bus 0000:01: resource 1 [mem 0xe4600000-0xe46fffff]
[ 0.418832] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.418835] pci_bus 0000:08: resource 0 [io 0x8000-0x8fff]
[ 0.418839] pci_bus 0000:08: resource 1 [mem 0xe4100000-0xe41fffff]
[ 0.418842] pci_bus 0000:08: resource 2 [mem 0xe4c00000-0xe4dfffff 64bit pref]
[ 0.418846] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
[ 0.418849] pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
[ 0.418853] pci_bus 0000:10: resource 2 [mem 0xe4a00000-0xe4bfffff 64bit pref]
[ 0.418856] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff]
[ 0.418859] pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]
[ 0.418863] pci_bus 0000:20: resource 2 [mem 0xe4800000-0xe49fffff 64bit pref]
[ 0.418867] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.418870] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
[ 0.418873] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xebffffff pref]
[ 0.418877] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.418880] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.418883] pci_bus 0000:03: resource 0 [io 0x6000-0x60ff]
[ 0.418887] pci_bus 0000:03: resource 1 [io 0x6400-0x64ff]
[ 0.418890] pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]
[ 0.418893] pci_bus 0000:03: resource 3 [mem 0xec000000-0xefffffff]
[ 0.418950] NET: Registered protocol family 2
[ 0.419044] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.419340] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.420069] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.420428] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.420431] TCP reno registered
[ 0.420438] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420592] NET: Registered protocol family 1
[ 0.420739] pci 0000:01:00.0: Boot video device
[ 0.420770] PCI: CLS 64 bytes, default 64
[ 0.421192] audit: initializing netlink socket (disabled)
[ 0.421204] type=2000 audit(1333158232.416:1): initialized
[ 0.454350] highmem bounce pool size: 64 pages
[ 0.454358] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.470766] VFS: Disk quotas dquot_6.5.2
[ 0.470864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.471747] fuse init (API version 7.16)
[ 0.471873] msgmni has been set to 1647
[ 0.472323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.472358] io scheduler noop registered
[ 0.472360] io scheduler deadline registered
[ 0.472379] io scheduler cfq registered (default)
[ 0.472528] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.472569] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.472628] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.472688] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.472774] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.472831] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.472917] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.472975] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.473088] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.473120] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.473195] intel_idle: MWAIT substates: 0x22220
[ 0.473198] intel_idle: does not run on family 6 model 14
[ 0.476990] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.477126] ACPI: AC Adapter [C1B8] (on-line)
[ 0.477230] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.477237] ACPI: Sleep Button [C242]
[ 0.477301] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.477340] ACPI: Lid Switch [C23A]
[ 0.477403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.477408] ACPI: Power Button [PWRF]
[ 0.477520] ACPI: Fan [C335] (off)
[ 0.477588] ACPI: Fan [C336] (off)
[ 0.477654] ACPI: Fan [C337] (off)
[ 0.477718] ACPI: Fan [C338] (off)
[ 0.477782] ACPI: Fan [C339] (off)
[ 0.477849] ACPI: Fan [C33A] (off)
[ 0.477914] ACPI: Fan [C33B] (off)
[ 0.477978] ACPI: Fan [C33C] (off)
[ 0.478043] ACPI: Fan [C33D] (off)
[ 0.478112] ACPI: Fan [C33E] (off)
[ 0.478153] ACPI: Fan [C33F] (off)
[ 0.478164] ACPI: acpi_idle registered with cpuidle
[ 0.480261] Marking TSC unstable due to TSC halts in idle
[ 0.528818] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.528824] ACPI: Thermal Zone [TZ0] (39 C)
[ 0.543260] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.543265] ACPI: Thermal Zone [TZ1] (43 C)
[ 0.555815] Freeing initrd memory: 13324k freed
[ 0.558809] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.558816] ACPI: Thermal Zone [TZ2] (41 C)
[ 0.573222] thermal LNXTHERM:03: registered as thermal_zone3
[ 0.573227] ACPI: Thermal Zone [TZ3] (32 C)
[ 0.583442] thermal LNXTHERM:04: registered as thermal_zone4
[ 0.583446] ACPI: Thermal Zone [TZ4] (30 C)
[ 0.587176] thermal LNXTHERM:05: registered as thermal_zone5
[ 0.587179] ACPI: Thermal Zone [TZ5] (75 C)
[ 0.587239] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.587258] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.587342] ERST: Table is not found!
[ 0.587608] isapnp: Scanning for PnP cards...
[ 0.587627] ACPI: Battery Slot [C1B9] (battery absent)
[ 0.628624] ACPI: Battery Slot [C1BA] (battery present)
[ 0.704602] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.941808] isapnp: No Plug & Play device found
[ 0.946077] Linux agpgart interface v0.103
[ 0.947893] brd: module loaded
[ 0.948701] loop: module loaded
[ 0.948874] ata_piix 0000:00:1f.1: version 2.13
[ 0.948891] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.948937] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.949333] scsi0 : ata_piix
[ 0.949460] scsi1 : ata_piix
[ 0.949819] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[ 0.949823] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[ 0.949877] ata2: port disabled. ignoring.
[ 0.950295] Fixed MDIO Bus: probed
[ 0.950330] PPP generic driver version 2.4.2
[ 0.950381] tun: Universal TUN/TAP device driver, 1.6
[ 0.950383] tun: (C) 1999-2004 Max Krasnyansky
[ 0.950486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.950516] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.950530] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.950535] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.950579] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.950605] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.950618] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.954513] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.954534] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4704000
[ 0.968020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.968167] hub 1-0:1.0: USB hub found
[ 0.968173] hub 1-0:1.0: 8 ports detected
[ 0.968278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.968295] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.968321] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.968330] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.968335] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.968379] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.968410] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
[ 0.968565] hub 2-0:1.0: USB hub found
[ 0.968570] hub 2-0:1.0: 2 ports detected
[ 0.968658] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.968666] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.968670] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.968711] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.968752] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020
[ 0.968902] hub 3-0:1.0: USB hub found
[ 0.968907] hub 3-0:1.0: 2 ports detected
[ 0.968986] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.968994] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.968998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.969038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.969080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[ 0.969232] hub 4-0:1.0: USB hub found
[ 0.969236] hub 4-0:1.0: 2 ports detected
[ 0.969317] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.969325] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.969329] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.969373] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.969417] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[ 0.969566] hub 5-0:1.0: USB hub found
[ 0.969571] hub 5-0:1.0: 2 ports detected
[ 0.969728] i8042: PNP: PS/2 Controller [PNP0303:C216,PNP0f13:C217] at 0x60,0x64 irq 1,12
[ 0.971330] i8042: Detected active multiplexing controller, rev 1.1
[ 0.971988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.972014] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.972053] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.972086] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.972117] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.972261] mousedev: PS/2 mouse device common for all mice
[ 0.972451] rtc_cmos 00:08: RTC can wake from S4
[ 0.972581] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.972616] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.972726] device-mapper: uevent: version 1.0.3
[ 0.972819] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.972857] EISA: Probing bus 0 at eisa.0
[ 0.972865] Cannot allocate resource for EISA slot 1
[ 0.972868] Cannot allocate resource for EISA slot 2
[ 0.972871] Cannot allocate resource for EISA slot 3
[ 0.972873] Cannot allocate resource for EISA slot 4
[ 0.972876] Cannot allocate resource for EISA slot 5
[ 0.972879] Cannot allocate resource for EISA slot 6
[ 0.972881] Cannot allocate resource for EISA slot 7
[ 0.972884] Cannot allocate resource for EISA slot 8
[ 0.972886] EISA: Detected 0 cards.
[ 0.972899] cpufreq-nforce2: No nForce2 chipset.
[ 0.972960] cpuidle: using governor ladder
[ 0.973058] cpuidle: using governor menu
[ 0.973061] EFI Variables Facility v0.08 2004-May-17
[ 0.973445] TCP cubic registered
[ 0.973622] NET: Registered protocol family 10
[ 0.974390] NET: Registered protocol family 17
[ 0.974410] Registering the dns_resolver key type
[ 0.974438] Using IPI No-Shortcut mode
[ 0.974534] PM: Hibernation image not present or could not be loaded.
[ 0.974548] registered taskstats version 1
[ 0.989800] Magic number: 4:99:712
[ 0.989942] rtc_cmos 00:08: setting system clock to 2012-03-31 01:43:53 UTC (1333158233)
[ 0.994390] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.995454] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.995458] EDD information not available.
[ 1.112552] ata1.00: ATAPI: UJDA775 DVD/CDRW, 1.00, max MWDMA2
[ 1.128476] ata1.00: configured for MWDMA2
[ 1.130409] scsi 0:0:0:0: CD-ROM MATSHITA UJDA775 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 1.132136] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.132143] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.132349] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.132453] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.132651] Freeing unused kernel memory: 696k freed
[ 1.132972] Write protecting the kernel text: 5344k
[ 1.133066] Write protecting the kernel read-only data: 2192k
[ 1.158599] udevd[84]: starting version 173
[ 1.311293] tg3.c:v3.119 (May 18, 2011)
[ 1.311317] tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.311331] tg3 0000:08:00.0: setting latency timer to 64
[ 1.314103] sdhci: Secure Digital Host Controller Interface driver
[ 1.314108] sdhci: Copyright(c) Pierre Ossman
[ 1.314465] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
[ 1.314486] sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.314527] mmc0: no vmmc regulator found
[ 1.314574] Registered led device: mmc0::
[ 1.314634] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
[ 1.327597] ahci 0000:00:1f.2: version 3.0
[ 1.327629] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.327696] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.327760] ahci: SSS flag set, parallel bus scan disabled
[ 1.327798] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.327805] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.327813] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.335814] scsi2 : ahci
[ 1.360958] scsi3 : ahci
[ 1.362039] tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:16:d4:4c:3f:75
[ 1.362047] tg3 0000:08:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.362053] tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.362058] tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.364828] scsi4 : ahci
[ 1.367490] scsi5 : ahci
[ 1.367675] ata3: SATA max UDMA/133 abar m1024@0xe4705000 port 0xe4705100 irq 44
[ 1.367680] ata4: DUMMY
[ 1.367683] ata5: DUMMY
[ 1.367685] ata6: DUMMY
[ 1.712050] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 1.856052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.859495] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.859503] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.859817] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.859826] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.861648] ata3.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133
[ 1.861655] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.865355] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.865362] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.865673] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.865682] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.867505] ata3.00: configured for UDMA/133
[ 1.867750] scsi 2:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5
[ 1.868031] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.868040] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.868263] sd 2:0:0:0: [sda] Write Protect is off
[ 1.868269] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.868309] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.910441] sda: sda1 sda2 < sda5 >
[ 1.911124] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.128067] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 2.379344] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.536064] usb 3-2: new low speed USB device number 3 using uhci_hcd
[ 10.320119] usb 3-2: USB disconnect, device number 3
[ 11.800060] usb 3-2: new low speed USB device number 4 using uhci_hcd
[ 16.263977] udevd[325]: starting version 173
[ 16.311451] lp: driver loaded but no devices found
[ 16.347773] Adding 3536892k swap on /dev/sda5. Priority:-1 extents:1 across:3536892k
[ 16.449193] cfg80211: Calling CRDA to update world regulatory domain
[ 16.490755] [drm] Initialized drm 1.1.0 20060810
[ 16.542882] hp_accel: hardware type NC64x0 found
[ 16.545371] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[ 16.546746] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 16.546874] [Firmware Bug]: _BCQ is used instead of _BQC
[ 16.548776] acpi device:03: registered as cooling_device13
[ 16.549138] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 16.549381] ACPI: Video Device [C12F] (multi-head: yes rom: no post: no)
[ 16.551868] wmi: Mapper loaded
[ 16.552618] lis3lv02d: 12 bits sensor found
[ 16.553586] irda_init()
[ 16.553598] NET: Registered protocol family 23
[ 16.554358] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
[ 16.554383] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 7, mode: 0x0e
[ 16.554388] smsc_ircc_present: can't get sir_base of 0x3e8
[ 16.555914] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 16.555918] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 16.555986] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.556033] iwl3945 0000:10:00.0: setting latency timer to 64
[ 16.569843] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.604862] [drm] radeon defaulting to kernel modesetting.
[ 16.604867] [drm] radeon kernel modesetting enabled.
[ 16.604944] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.604952] radeon 0000:01:00.0: setting latency timer to 64
[ 16.612033] [drm] initializing kernel modesetting (RV515 0x1002:0x714A 0x103C:0x30AC).
[ 16.612052] [drm] register mmio base: 0xE4600000
[ 16.612055] [drm] register mmio size: 65536
[ 16.612186] ATOM BIOS: M52T
[ 16.612231] [drm] Generation 2 PCI interface, using max accessible memory
[ 16.612237] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
[ 16.612241] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[ 16.612262] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.612264] [drm] Driver supports precise vblank timestamp query.
[ 16.612342] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 16.612368] radeon 0000:01:00.0: radeon: using MSI.
[ 16.612403] [drm] radeon: irq initialized.
[ 16.612410] mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
[ 16.612413] [drm] Detected VRAM RAM=128M, BAR=128M
[ 16.612416] [drm] RAM width 64bits DDR
[ 16.616096] [TTM] Zone kernel: Available graphics memory: 428776 kiB.
[ 16.616100] [TTM] Zone highmem: Available graphics memory: 1743500 kiB.
[ 16.616102] [TTM] Initializing pool allocator.
[ 16.616127] [drm] radeon: 128M of VRAM memory ready
[ 16.616130] [drm] radeon: 512M of GTT memory ready.
[ 16.616147] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 16.618003] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 16.627216] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 16.627222] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 16.627378] iwl3945 0000:10:00.0: irq 46 for MSI/MSI-X
[ 16.629759] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 16.642286] Registered led device: phy0-led
[ 16.642367] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.664372] type=1400 audit(1333158249.172:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=568 comm="apparmor_parser"
[ 16.664928] type=1400 audit(1333158249.172:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser"
[ 16.665272] type=1400 audit(1333158249.172:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser"
[ 16.673710] radeon 0000:01:00.0: WB enabled
[ 16.677986] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 16.684097] intel_rng: FWH not detected
[ 16.689562] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ac]
[ 16.689588] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 16.689595] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 16.689599] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 16.689606] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[ 16.690000] Bluetooth: Core ver 2.16
[ 16.690056] NET: Registered protocol family 31
[ 16.690058] Bluetooth: HCI device and connection manager initialized
[ 16.690062] Bluetooth: HCI socket layer initialized
[ 16.690064] Bluetooth: L2CAP socket layer initialized
[ 16.692933] Bluetooth: SCO socket layer initialized
[ 16.693443] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 16.694425] usbcore: registered new interface driver btusb
[ 16.702371] leds_ss4200: no LED devices found
[ 16.703539] [drm] Loading R500 Microcode
[ 16.728759] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[ 16.729017] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-2/input0
[ 16.729071] usbcore: registered new interface driver usbhid
[ 16.729074] usbhid: USB HID core driver
[ 16.755944] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.755953] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.755963] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.756056] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 16.756093] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.790539] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 16.790844] Registered led device: hp::hddprotect
[ 16.790902] hp_accel: driver loaded
[ 16.922670] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[ 16.922677] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 16.922682] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 16.922694] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 16.922698] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: excluding 0x6000-0x60ff 0x6400-0x64ff
[ 16.937566] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
[ 16.937573] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff
[ 16.937590] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xebffffff pref]
[ 16.937594] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xebffffff: excluding 0xe8000000-0xebffffff
[ 16.952715] init: failsafe main process (705) killed by TERM signal
[ 16.988182] tifm_7xx1 0000:02:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.016072] tifm_core: MMC/SD card detected in socket 0:1
[ 17.066205] type=1400 audit(1333158249.572:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=791 comm="apparmor_parser"
[ 17.067580] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 17.067588] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 17.075511] type=1400 audit(1333158249.580:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=792 comm="apparmor_parser"
[ 17.084531] type=1400 audit(1333158249.592:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=792 comm="apparmor_parser"
[ 17.086859] type=1400 audit(1333158249.592:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=792 comm="apparmor_parser"
[ 17.107914] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 17.110337] type=1400 audit(1333158249.616:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=796 comm="apparmor_parser"
[ 17.123925] type=1400 audit(1333158249.628:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=796 comm="apparmor_parser"
[ 17.126902] type=1400 audit(1333158249.632:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=793 comm="apparmor_parser"
[ 17.213285] tg3 0000:08:00.0: irq 48 for MSI/MSI-X
[ 17.324393] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.324399] cfg80211: World regulatory domain updated:
[ 17.324402] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.324406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.324410] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.324414] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.324417] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.324421] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.364422] [drm] radeon: ring at 0x0000000008001000
[ 17.364464] [drm] ring test succeeded in 8 usecs
[ 17.364689] [drm] radeon: ib pool ready.
[ 17.364790] [drm] ib test succeeded in 0 usecs
[ 17.366748] [drm] Radeon Display Connectors
[ 17.366751] [drm] Connector 0:
[ 17.366753] [drm] VGA
[ 17.366757] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 17.366759] [drm] Encoders:
[ 17.366761] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.366764] [drm] Connector 1:
[ 17.366766] [drm] LVDS
[ 17.366769] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[ 17.366771] [drm] Encoders:
[ 17.366773] [drm] LCD1: INTERNAL_LVTM1
[ 17.366775] [drm] Connector 2:
[ 17.366777] [drm] S-video
[ 17.366779] [drm] Encoders:
[ 17.366781] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 17.366783] [drm] Connector 3:
[ 17.366785] [drm] DVI-I
[ 17.366787] [drm] HPD1
[ 17.366790] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 17.366792] [drm] Encoders:
[ 17.366794] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 17.390653] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.396814] ppdev: user-space parallel port driver
[ 17.472913] input: HP WMI hotkeys as /devices/virtual/input/input8
[ 17.477666] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[ 17.518744] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 17.554446] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 17.589180] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3f7 0x4d0-0x4d7
[ 17.590025] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 17.591750] parport_pc 00:03: reported by Plug and Play ACPI
[ 17.591854] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.593327] init: apport pre-start process (912) terminated with status 1
[ 17.596481] clean.
[ 17.596583] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.597377] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 17.597483] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 17.597548] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 17.597617] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 17.609760] init: apport post-stop process (935) terminated with status 1
[ 17.634590] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.705831] lp0: using parport0 (interrupt-driven).
[ 17.769485] [drm] Radeon display connector LVDS-1: Found valid EDID
[ 17.786649] [drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[ 17.786684] [drm] radeon: power management initialized
[ 17.942670] Bluetooth: RFCOMM TTY layer initialized
[ 17.942685] Bluetooth: RFCOMM socket layer initialized
[ 17.942688] Bluetooth: RFCOMM ver 1.11
[ 17.948640] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.948645] Bluetooth: BNEP filters: protocol multicast
[ 18.423918] [drm] fb mappable at 0xD80C0000
[ 18.423923] [drm] vram apper at 0xD8000000
[ 18.423925] [drm] size 4096000
[ 18.423928] [drm] fb depth is 24
[ 18.423930] [drm] pitch is 5120
[ 18.424144] fbcon: radeondrmfb (fb0) is primary device
[ 18.424279] Console: switching to colour frame buffer device 160x50
[ 18.424322] fb0: radeondrmfb frame buffer device
[ 18.424324] drm: registered panic notifier
[ 18.424335] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 19.906193] psmouse serio5: ID: 10 00 64
[ 20.488108] usb 3-2: USB disconnect, device number 4
[ 21.802062] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 21.972055] usb 3-2: new low speed USB device number 5 using uhci_hcd
[ 22.162833] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
[ 22.162977] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-2/input0
[ 22.408851] init: plymouth-stop pre-start process (1281) terminated with status 1
[ 22.622375] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input10
[ 23.312377] wlan0: authenticate with 30:46:9a:86:b8:be (try 1)
[ 23.335749] wlan0: authenticated
[ 23.336158] wlan0: associate with 30:46:9a:86:b8:be (try 1)
[ 23.340710] wlan0: RX AssocResp from 30:46:9a:86:b8:be (capab=0x411 status=0 aid=4)
[ 23.340717] wlan0: associated
[ 23.346515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.883009] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.488052] wlan0: no IPv6 routers present
[ 43.221851] wlan0: authenticate with 00:26:75:5a:ce:6c (try 1)
[ 43.225684] wlan0: authenticated
[ 43.248193] wlan0: associate with 00:26:75:5a:ce:6c (try 1)
[ 43.250837] wlan0: RX ReassocResp from 00:26:75:5a:ce:6c (capab=0x411 status=0 aid=3)
[ 43.250842] wlan0: associated
[ 43.252414] cfg80211: Calling CRDA for country: SG
[ 43.256978] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 43.256984] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.256987] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 43.256991] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.256994] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 43.256998] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257001] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257005] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257008] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257011] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257015] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257018] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257021] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257025] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257028] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257032] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257035] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257039] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257042] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257046] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257049] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257053] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257056] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257060] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257063] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257066] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257070] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257073] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257076] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257080] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257083] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257087] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257090] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257094] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257097] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257101] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257104] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257108] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257111] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257114] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257118] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257121] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257124] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257128] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257131] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257135] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257138] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 43.257142] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 43.257145] cfg80211: Regulatory domain changed to country: SG
[ 43.257148] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 43.257152] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.257155] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.257158] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 43.257162] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 81.012500] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[ 2941.756473] CE: hpet increased min_delta_ns to 20113 nsec
[ 2941.756761] CE: hpet increased min_delta_ns to 30169 nsec
[ 3784.173093] CE: hpet increased min_delta_ns to 45253 nsec
[ 4156.892897] CE: hpet increased min_delta_ns to 67879 nsec
[ 5535.404035] iwl3945 0000:10:00.0: Queue 2 stuck for 2000 ms.
[ 5535.404042] iwl3945 0000:10:00.0: On demand firmware reload
[ 5535.451306] ieee80211 phy0: Hardware restart was requested
[ 7271.375032] CE: hpet increased min_delta_ns to 101818 nsec
[ 7273.392010] CE: hpet increased min_delta_ns to 152727 nsec
[ 7287.616010] CE: hpet increased min_delta_ns to 229090 nsec
[ 7337.390548] CE: hpet increased min_delta_ns to 343635 nsec
[ 7360.218827] CE: hpet increased min_delta_ns to 515452 nsec