dmesg - first
Linux version 3.3.0-gentoo (root@monoliz) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #17 SMP Wed Mar 21 21:49:22 PDT 2012
KERNEL supported cpus:
Intel GenuineIntel
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000f7fe0000 (usable)
BIOS-e820: 00000000f7fe0000 - 00000000f7fefc00 (ACPI data)
BIOS-e820: 00000000f7fefc00 - 00000000f7fff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000148000000 (usable)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.3 present.
DMI: Dell Computer Corporation PowerEdge 2600 /0F0364, BIOS A09 06/22/2003
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x148000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 140000000 mask FF8000000 write-back
3 base 0F8000000 mask FF8000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 1GB, type WB
reg 2, base: 5GB, range: 128MB, type WB
reg 3, base: 3968MB, range: 128MB, type UC
total RAM covered: 5120M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3968MB, range: 128MB, type UC
reg 2, base: 4GB, range: 1GB, type WB
reg 3, base: 5GB, range: 256MB, type WB
reg 4, base: 5248MB, range: 128MB, type UC
e820 update range: 00000000f8000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
Base memory trampoline at [c009e000] 9e000 size 4096
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 17fb000-1800000
ACPI: RSDP 000fdc20 00014 (v00 DELL )
ACPI: RSDT 000fdc34 00030 (v01 DELL PE2600 00000001 MSFT 0100000A)
ACPI: FACP 000fdc64 00074 (v01 DELL PE2600 00000001 MSFT 0100000A)
ACPI: DSDT f7fe0000 01FD0 (v01 DELL PE2600 00000001 MSFT 0100000A)
ACPI: FACS f7fefc00 00040
ACPI: APIC 000fdcd8 000BE (v01 DELL PE2600 00000001 MSFT 0100000A)
ACPI: SPCR 000fdd96 00050 (v01 DELL PE2600 00000001 MSFT 0100000A)
ACPI: Local APIC address 0xfee00000
4356MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
Normal 0x00000001 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00148000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x000f7fe0
0: 0x00100000 -> 0x00148000
On node 0 totalpages: 1310591
free_area_init_node: node 0, pgdat c1319b80, node_mem_map f52fd020
Normal zone: 1784 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 226469 pages, LIFO batch:31
HighMem zone: 8713 pages used for memmap
HighMem zone: 1073625 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec81000] gsi_base[72])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec82000] gsi_base[120])
IOAPIC[3]: apic_id 11, version 32, address 0xfec82000, GSI 120-143
ACPI: IOAPIC (id[0x0c] address[0xfec82800] gsi_base[144])
IOAPIC[4]: apic_id 12, version 32, address 0xfec82800, GSI 144-167
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 184
Allocating PCI resources starting at f7fff000 (gap: f7fff000:6c01000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5000000 s25216 r0 d23936 u524288
pcpu-alloc: s25216 r0 d23936 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1300094
Kernel command line: root=/dev/sda3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:00148000)
Memory: 5195540k/5373952k available (2517k kernel code, 46824k reserved, 671k data, 316k init, 4329352k highmem)
virtual kernel memory layout:
fixmap : 0xfff68000 - 0xfffff000 ( 604 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc131e000 - 0xc136d000 ( 316 kB)
.data : 0xc127556d - 0xc131d400 ( 671 kB)
.text : 0xc1000000 - 0xc127556d (2517 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:216 16
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3189.767 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6379.53 BogoMIPS (lpj=31897670)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20120111
Enabling APIC mode: Flat. Using 5 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
CPU 1 irqstacks, hard=f4c64000 soft=f4c66000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9e000
Initializing CPU#1
CPU 2 irqstacks, hard=f4c72000 soft=f4c74000
#2
smpboot cpu 2: start_ip = 9e000
Initializing CPU#2
CPU 3 irqstacks, hard=f4c82000 soft=f4c84000
#3 Ok.
smpboot cpu 3: start_ip = 9e000
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (25518.32 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:254c] type 0 class 0x000600
pci 0000:00:02.0: [8086:2543] type 1 class 0x000604
pci 0000:00:03.0: [8086:2545] type 1 class 0x000604
pci 0000:00:04.0: [8086:2547] type 1 class 0x000604
pci 0000:00:1d.0: [8086:2482] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xbce0-0xbcff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2480] type 0 class 0x000601
pci 0000:01:1c.0: [8086:1461] type 0 class 0x000800
pci 0000:01:1c.0: reg 10: [mem 0xfe6ff000-0xfe6fffff]
pci 0000:01:1d.0: [8086:1460] type 1 class 0x000604
pci 0000:01:1e.0: [8086:1461] type 0 class 0x000800
pci 0000:01:1e.0: reg 10: [mem 0xfe6fe000-0xfe6fefff]
pci 0000:01:1f.0: [8086:1460] type 1 class 0x000604
pci 0000:00:02.0: PCI bridge to [bus 01-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe9fffff]
pci 0000:01:1d.0: PCI bridge to [bus 02-02]
pci 0000:03:01.0: [8086:100d] type 0 class 0x000200
pci 0000:03:01.0: reg 10: [mem 0xfe8e0000-0xfe8fffff 64bit]
pci 0000:03:01.0: reg 18: [mem 0xfe8c0000-0xfe8dffff 64bit]
pci 0000:03:01.0: reg 20: [io 0xece0-0xecff]
pci 0000:03:01.0: reg 30: [mem 0xfe900000-0xfe91ffff pref]
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:01:1f.0: PCI bridge to [bus 03-03]
pci 0000:01:1f.0: bridge window [io 0xe000-0xefff]
pci 0000:01:1f.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:04:1c.0: [8086:1461] type 0 class 0x000800
pci 0000:04:1c.0: reg 10: [mem 0xfe4ff000-0xfe4fffff]
pci 0000:04:1d.0: [8086:1460] type 1 class 0x000604
pci 0000:04:1e.0: [8086:1461] type 0 class 0x000800
pci 0000:04:1e.0: reg 10: [mem 0xfe4fe000-0xfe4fefff]
pci 0000:04:1f.0: [8086:1460] type 1 class 0x000604
pci 0000:00:03.0: PCI bridge to [bus 04-06]
pci 0000:00:03.0: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:04:1d.0: PCI bridge to [bus 05-05]
pci 0000:04:1f.0: PCI bridge to [bus 06-06]
pci 0000:07:1c.0: [8086:1461] type 0 class 0x000800
pci 0000:07:1c.0: reg 10: [mem 0xfe1ff000-0xfe1fffff]
pci 0000:07:1d.0: [8086:1460] type 1 class 0x000604
pci 0000:07:1e.0: [8086:1461] type 0 class 0x000800
pci 0000:07:1e.0: reg 10: [mem 0xfe1fe000-0xfe1fefff]
pci 0000:07:1f.0: [8086:1460] type 1 class 0x000604
pci 0000:00:04.0: PCI bridge to [bus 07-0a]
pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff pref]
pci 0000:08:08.0: [1028:000e] type 0 class 0x000104
pci 0000:08:08.0: reg 10: [mem 0xfebf0000-0xfebfffff pref]
pci 0000:08:08.0: reg 30: [mem 0xfe300000-0xfe307fff pref]
pci 0000:07:1d.0: PCI bridge to [bus 08-09]
pci 0000:07:1d.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:07:1d.0: bridge window [mem 0xfeb00000-0xfebfffff 64bit pref]
pci 0000:07:1f.0: PCI bridge to [bus 0a-0a]
pci 0000:0b:00.0: [3388:0021] type 1 class 0x000604
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0b:04.0: [1002:4752] type 0 class 0x000300
pci 0000:0b:04.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:0b:04.0: reg 14: [io 0xcc00-0xccff]
pci 0000:0b:04.0: reg 18: [mem 0xfdcff000-0xfdcfffff]
pci 0000:0b:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0b:04.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0b-0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci 0000:0c:08.0: [1106:3044] type 0 class 0x000c00
pci 0000:0c:08.0: reg 10: [mem 0xfdeff800-0xfdefffff]
pci 0000:0c:08.0: reg 14: [io 0xdc80-0xdcff]
pci 0000:0c:08.0: supports D2
pci 0000:0c:08.0: PME# supported from D2 D3hot D3cold
pci 0000:0c:09.0: [1033:0035] type 0 class 0x000c03
pci 0000:0c:09.0: reg 10: [mem 0xfdefe000-0xfdefefff]
pci 0000:0c:09.0: supports D1 D2
pci 0000:0c:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:09.1: [1033:0035] type 0 class 0x000c03
pci 0000:0c:09.1: reg 10: [mem 0xfdefd000-0xfdefdfff]
pci 0000:0c:09.1: supports D1 D2
pci 0000:0c:09.1: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:09.2: [1033:00e0] type 0 class 0x000c03
pci 0000:0c:09.2: reg 10: [mem 0xfdeff400-0xfdeff4ff]
pci 0000:0c:09.2: supports D1 D2
pci 0000:0c:09.2: PME# supported from D0 D1 D2 D3hot
pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
pci 0000:0b:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:0b:00.0: bridge window [mem 0xfde00000-0xfdffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE.ZION._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PF._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 11 12 14) *15
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 *4 5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 11 12 *14)
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 00000000f7fe0000 - 00000000f7ffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xf8000000-0xfebfffff window]
pnp 00:00: [mem 0x100000000-0xfffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (disabled)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077f]
pnp 00:09: [irq 7]
pnp 00:09: [dma 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x0800-0x087f]
pnp 00:0a: [io 0x0880-0x08bf]
pnp 00:0a: [io 0x08c0-0x08df]
pnp 00:0a: [io 0x0c00-0x0c1f]
pnp 00:0a: [io 0x0ca2-0x0ca7]
pnp 00:0a: [io 0x0c20-0x0c2f]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [irq 10]
system 00:0a: [io 0x0800-0x087f] has been reserved
system 00:0a: [io 0x0880-0x08bf] has been reserved
system 00:0a: [io 0x08c0-0x08df] has been reserved
system 00:0a: [io 0x0c00-0x0c1f] has been reserved
system 00:0a: [io 0x0ca2-0x0ca7] has been reserved
system 00:0a: [io 0x0c20-0x0c2f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1e.0: BAR 9: assigned [mem 0xf8000000-0xf80fffff pref]
pci 0000:01:1d.0: PCI bridge to [bus 02-02]
pci 0000:01:1f.0: PCI bridge to [bus 03-03]
pci 0000:01:1f.0: bridge window [io 0xe000-0xefff]
pci 0000:01:1f.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:02.0: PCI bridge to [bus 01-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe9fffff]
pci 0000:04:1d.0: PCI bridge to [bus 05-05]
pci 0000:04:1f.0: PCI bridge to [bus 06-06]
pci 0000:00:03.0: PCI bridge to [bus 04-06]
pci 0000:00:03.0: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:07:1d.0: PCI bridge to [bus 08-09]
pci 0000:07:1d.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:07:1d.0: bridge window [mem 0xfeb00000-0xfebfffff 64bit pref]
pci 0000:07:1f.0: PCI bridge to [bus 0a-0a]
pci 0000:00:04.0: PCI bridge to [bus 07-0a]
pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe3fffff]
pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff pref]
pci 0000:0b:04.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:0b:00.0: PCI bridge to [bus 0c-0c]
pci 0000:0b:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:0b:00.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0c]
pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe5fffff]
pci_bus 0000:07: resource 1 [mem 0xfe100000-0xfe3fffff]
pci_bus 0000:07: resource 2 [mem 0xfeb00000-0xfebfffff pref]
pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:08: resource 2 [mem 0xfeb00000-0xfebfffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:0b: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:0b: resource 2 [mem 0xf8000000-0xf80fffff pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0b: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0c: resource 1 [mem 0xfde00000-0xfdffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:0b:04.0: Boot video device
PCI: CLS 64 bytes, default 64
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 1691
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megaraid: probe new device 0x1028:0x000e:0x1028:0x0123: bus 8:slot 8:func 0
megaraid: fw version:[2.37] bios version:[1.05]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
scsi 0:0:6:0: Processor PE/PV 1x6 SCSI BP 1.1 PQ: 0 ANSI: 2
Refined TSC clocksource calibration: 3189.706 MHz.
Switching to clocksource tsc
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
scsi 0:2:0:0: Direct-Access MegaRAID LD0 RAID0 09634R 2.37 PQ: 0 ANSI: 2
sd 0:2:0:0: [sda] 429330432 512-byte logical blocks: (219 GB/204 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
e1000: Copyright (c) 1999-2006 Intel Corporation.
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] Attached SCSI disk
e1000 0000:03:01.0: eth0: (PCI-X:133MHz:64-bit) 00:0b:db:94:06:39
e1000 0000:03:01.0: eth0: Intel(R) PRO/1000 Network Connection
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:0c:09.2: EHCI Host Controller
ehci_hcd 0000:0c:09.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:0c:09.2: irq 19, io mem 0xfdeff400
ehci_hcd 0000:0c:09.2: USB 2.0 started, EHCI 0.95
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bce0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 316k freed
Write protecting the kernel text: 2520k
Write protecting the kernel read-only data: 524k
usb 1-5: new high-speed USB device number 2 using ehci_hcd
usb-storage 1-5:1.0: Quirks match for vid 067b pid 3507: 110
scsi1 : usb-storage 1-5:1.0
scsi 1:0:0:0: Direct-Access Maxtor 6 L300R0 BAH4 PQ: 0 ANSI: 0
sd 1:0:0:0: [sdb] Adjusting the sector count from its reported value: 586114704
sd 1:0:0:0: [sdb] 586114703 512-byte logical blocks: (300 GB/279 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Adjusting the sector count from its reported value: 586114704
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: [sdb] Adjusting the sector count from its reported value: 586114704
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI disk
udevd[3677]: starting version 171
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
scsi 0:0:6:0: Attached scsi generic sg0 type 3
sd 0:2:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
parport0: cannot get buffer for DMA, resorting to PIO operation
parport0: Printer, Hewlett-Packard HP LaserJet 5MP
ppdev: user-space parallel port driver
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda5): barriers disabled
EXT4-fs (sda5): warning: checktime reached, running e2fsck is recommended
EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
microcode: CPU0 sig=0xf25, pf=0x1, revision=0x11
microcode: CPU1 sig=0xf25, pf=0x1, revision=0x11
microcode: CPU2 sig=0xf25, pf=0x1, revision=0x11
microcode: CPU3 sig=0xf25, pf=0x1, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x29, date = 2004-08-11
microcode: CPU1 updated to revision 0x29, date = 2004-08-11
microcode: CPU2 updated to revision 0x29, date = 2004-08-11
microcode: CPU3 updated to revision 0x29, date = 2004-08-11
microcode: Microcode Update Driver: v2.00 removed.
TCP: Peer 31.33.136.187:34567/41869 unexpectedly shrunk window 643409559:643410495 (repaired)
TCP: Peer 31.33.136.187:34567/41869 unexpectedly shrunk window 643582529:643584145 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
TCP: Peer 78.108.228.141:35259/60878 unexpectedly shrunk window 3648173586:3648174874 (repaired)
sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.