dmesg - pl00109-nolvm1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.45-0.3-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2011-08-22 10:12:58 +0200
Command line: root=/dev/disk/by-id/scsi-36003005700d7b88016ff8e0509dcfc57-part3 resume=/dev/disk/by-id/scsi-36003005700d7b88016ff8e0509dcfc57-part2 splash=silent crashkernel=256M-:128M vga=0x314
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf6a0000 (usable)
BIOS-e820: 00000000bf6a0000 - 00000000bf6ba000 (ACPI data)
BIOS-e820: 00000000bf6ba000 - 00000000bf6bb000 (ACPI NVS)
BIOS-e820: 00000000bf6bb000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000002440000000 (usable)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x2440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask FFC0000000 uncachable
1 base 0000000000 mask E000000000 write-back
2 base 2000000000 mask FC00000000 write-back
3 base 2400000000 mask FFC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf6a0 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009c000 (usable)
modified: 000000000009c000 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf6a0000 (usable)
modified: 00000000bf6a0000 - 00000000bf6ba000 (ACPI data)
modified: 00000000bf6ba000 - 00000000bf6bb000 (ACPI NVS)
modified: 00000000bf6bb000 - 00000000c0000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fed00000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffa00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000002440000000 (usable)
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf6a0000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf6a0000 page 4k
kernel direct mapping tables up to bf6a0000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000002440000000
0100000000 - 2440000000 page 1G
kernel direct mapping tables up to 2440000000 @ 12000-13000
RAMDISK: 37928000 - 37fef366
ACPI: RSDP 00000000000f7ec0 00024 (v02 PTLTD )
ACPI: XSDT 00000000bf6aedfb 0021C (v01 PTLTD ? XSDT 00060000 LTP 00000000)
ACPI: FACP 00000000bf6b4f3b 000F4 (v03 FSC TYLERBRG 00060000 PTL 000F4240)
ACPI: DSDT 00000000bf6af017 05EA0 (v01 FSC D2619 00060000 MSFT 03000001)
ACPI: FACS 00000000bf6bafc0 00040
ACPI: TCPA 00000000bf6b502f 00032 (v01 Phoeni x 00060000 TL 00000000)
ACPI: SLIT 00000000bf6b5061 00030 (v01 FSC 00060000 0000005A)
ACPI: SRAT 00000000bf6b5091 00228 (v01 Intel Tylerbrg 00060000 PHX. 00000001)
ACPI: SSDT 00000000bf6b52b9 000D8 (v01 FSC CST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5391 000D8 (v01 FSC CST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5469 000D8 (v01 FSC CST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5541 000D8 (v01 FSC CST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5619 000D8 (v01 FSC CST_PR04 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b56f1 000D8 (v01 FSC CST_PR05 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b57c9 000D8 (v01 FSC CST_PR10 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b58a1 000D8 (v01 FSC CST_PR11 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5979 000D8 (v01 FSC CST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5a51 000D8 (v01 FSC CST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5b29 000D8 (v01 FSC CST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5c01 000D8 (v01 FSC CST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5cd9 000D8 (v01 FSC CST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5db1 000D8 (v01 FSC CST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5e89 000D8 (v01 FSC CST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b5f61 000D8 (v01 FSC CST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6039 000D8 (v01 FSC CST_PR24 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6111 000D8 (v01 FSC CST_PR25 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b61e9 000D8 (v01 FSC CST_PR30 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b62c1 000D8 (v01 FSC CST_PR31 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6399 000D8 (v01 FSC CST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6471 000D8 (v01 FSC CST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6549 000D8 (v01 FSC CST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6621 000D8 (v01 FSC CST_PR35 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b66f9 001DF (v01 FSC PST_PR00 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b68d8 001DF (v01 FSC PST_PR01 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6ab7 001DF (v01 FSC PST_PR02 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6c96 001DF (v01 FSC PST_PR03 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b6e75 001DF (v01 FSC PST_PR04 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7054 001DF (v01 FSC PST_PR05 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7233 001DF (v01 FSC PST_PR10 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7412 001DF (v01 FSC PST_PR11 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b75f1 001DF (v01 FSC PST_PR12 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b77d0 001DF (v01 FSC PST_PR13 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b79af 001DF (v01 FSC PST_PR14 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7b8e 001DF (v01 FSC PST_PR15 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7d6d 001DF (v01 FSC PST_PR20 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b7f4c 001DF (v01 FSC PST_PR21 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b812b 001DF (v01 FSC PST_PR22 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b830a 001DF (v01 FSC PST_PR23 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b84e9 001DF (v01 FSC PST_PR24 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b86c8 001DF (v01 FSC PST_PR25 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b88a7 001DF (v01 FSC PST_PR30 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b8a86 001DF (v01 FSC PST_PR31 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b8c65 001DF (v01 FSC PST_PR32 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b8e44 001DF (v01 FSC PST_PR33 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b9023 001DF (v01 FSC PST_PR34 00060000 CSF 00000001)
ACPI: SSDT 00000000bf6b9202 001DF (v01 FSC PST_PR35 00060000 CSF 00000001)
ACPI: EINJ 00000000bf6b93e1 001B0 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: HEST 00000000bf6b9591 00268 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: BERT 00000000bf6b97f9 00030 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SSDT 00000000bf6b9829 000EB (v01 wheaos wheaosc 00060000 MSFT 03000001)
ACPI: ERST 00000000bf6b9914 00270 (v01 PTL WHEAPTL 00060000 PTL 00000001)
ACPI: SPCR 00000000bf6b9b84 00050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001)
ACPI: DMAR 00000000bf6b9bd4 001E8 (v01 Intel OEMDMAR 00060000 LOHR 00000001)
ACPI: MCFG 00000000bf6b9dbc 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
ACPI: HPET 00000000bf6b9df8 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
ACPI: APIC 00000000bf6b9e30 001A8 (v01 PTLTD ? APIC 00060000 LTP 00000000)
ACPI: BOOT 00000000bf6b9fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 48 -> Node 1
SRAT: PXM 1 -> APIC 49 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: Node 0 PXM 0 0-c0000000
SRAT: Node 0 PXM 0 100000000-1240000000
SRAT: Node 1 PXM 1 1240000000-2440000000
NUMA: Allocated memnodemap from 12080 - 12200
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001240000000
NODE_DATA [0000000000012200 - 00000000000461ff]
bootmap [0000000000100000 - 0000000000347fff] pages 248
(9 early reservations) ==> bootmem [0000000000 - 1240000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001cd9c78] TEXT DATA BSS ==> [0001000000 - 0001cd9c78]
#3 [0037928000 - 0037fef366] RAMDISK ==> [0037928000 - 0037fef366]
#4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000]
#5 [0001cda000 - 0001cda2d8] BRK ==> [0001cda000 - 0001cda2d8]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000012030] ACPI SLIT ==> [0000012000 - 0000012030]
#8 [0000012080 - 0000012200] MEMNODEMAP ==> [0000012080 - 0000012200]
Bootmem setup node 1 0000001240000000-0000002440000000
NODE_DATA [0000001240000080 - 000000124003407f]
bootmap [0000001240035000 - 0000001240274fff] pages 240
(9 early reservations) ==> bootmem [1240000000 - 2440000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001cd9c78] TEXT DATA BSS
#3 [0037928000 - 0037fef366] RAMDISK
#4 [000009c000 - 0000100000] BIOS reserved
#5 [0001cda000 - 0001cda2d8] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000012030] ACPI SLIT
#8 [0000012080 - 0000012200] MEMNODEMAP
found SMP MP-table at [ffff8800000f7ef0] f7ef0
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 148480MB)
[ffffea0000000000-ffffea00001fffff] PMD -> [ffff880001e00000-ffff880001ffffff] on node 0
[ffffea0000200000-ffffea0016ffffff] PMD -> [ffff88000a000000-ffff88001fffffff] on node 0
[ffffea0017000000-ffffea00261fffff] PMD -> [ffff880028600000-ffff8800377fffff] on node 0
[ffffea0026200000-ffffea003fdfffff] PMD -> [ffff880038000000-ffff880051bfffff] on node 0
[ffffea003fe00000-ffffea003fffffff] PMD -> [ffff881240400000-ffff8812405fffff] on node 1
[ffffea0040000000-ffffea007edfffff] PMD -> [ffff881240800000-ffff88127f5fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x02440000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bf6a0
0: 0x00100000 -> 0x01240000
1: 0x01240000 -> 0x02440000
On node 0 totalpages: 18871852
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3819 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765656 pages, LIFO batch:31
Normal zone: 247296 pages used for memmap
Normal zone: 17840640 pages, LIFO batch:31
On node 1 totalpages: 18874368
Normal zone: 258048 pages used for memmap
Normal zone: 18616320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bf6a0000 - 00000000bf6ba000
PM: Registered nosave memory: 00000000bf6ba000 - 00000000bf6bb000
PM: Registered nosave memory: 00000000bf6bb000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff880028200000 s82200 r8192 d24296 u131072
pcpu-alloc: s82200 r8192 d24296 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 14 15 16 17 -- -- -- --
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 20 21 22 23 -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 37226435
Policy zone: Normal
Kernel command line: root=/dev/disk/by-id/scsi-36003005700d7b88016ff8e0509dcfc57-part3 resume=/dev/disk/by-id/scsi-36003005700d7b88016ff8e0509dcfc57-part2 splash=silent crashkernel=256M-:128M vga=0x314
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 148699592k/152043520k available (3721k kernel code, 1058640k absent, 2285288k reserved, 5671k data, 976k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1008
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 1509949440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2800.359 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.71 BogoMIPS (lpj=11201436)
pid_max: default: 32768 minimum: 301
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fed14000 flags: 0x1
IOMMU fed14000: ver 1:0 cap c90780106f0462 ecap f02076
DMAR: RMRR base: 0x000000bf6d0000 end: 0x000000bf6e7fff
DMAR: RMRR base: 0x000000bf6f0000 end: 0x000000bf6f0fff
DMAR: RMRR base: 0x000000bf6f1000 end: 0x000000bf6f1fff
DMAR: RMRR base: 0x000000bf6f2000 end: 0x000000bf6f2fff
DMAR: RMRR base: 0x000000bf6fa000 end: 0x000000bf6fafff
DMAR: RMRR base: 0x000000bf6f3000 end: 0x000000bf6f3fff
DMAR: RMRR base: 0x000000bf6f4000 end: 0x000000bf6f4fff
DMAR: RMRR base: 0x000000bf6f5000 end: 0x000000bf6f5fff
DMAR: RMRR base: 0x000000bf6fb000 end: 0x000000bf6fbfff
DMAR: ATSR flags: 0x0
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 02
Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
Booting Node 1, Processors #6 #7 #8 #9 #10 #11 Ok.
Booting Node 0, Processors #12 #13 #14 #15 #16 #17 Ok.
Booting Node 1, Processors #18 #19 #20 #21 #22 #23 Ok.
Brought up 24 CPUs
Total of 24 processors activated (134405.21 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
Time: 16:15:37 Date: 03/29/12
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e0afffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [CPU0] (0000:ff)
ACPI: PCI Root Bridge [CPU1] (0000:fe)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xcd000000-0xcd0003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xcd001000-0xcd0013ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
pci 0000:00:1f.2: reg 20 io port: [0x1c10-0x1c1f]
pci 0000:00:1f.2: reg 24 io port: [0x1c00-0x1c0f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xcd002000-0xcd0020ff]
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.5: reg 10 io port: [0x1c68-0x1c6f]
pci 0000:00:1f.5: reg 14 io port: [0x1c5c-0x1c5f]
pci 0000:00:1f.5: reg 18 io port: [0x1c60-0x1c67]
pci 0000:00:1f.5: reg 1c io port: [0x1c58-0x1c5b]
pci 0000:00:1f.5: reg 20 io port: [0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 24 io port: [0x1c20-0x1c2f]
pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xcd180000-0xcd183fff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcd140000-0xcd17ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcd100000-0xcd1fffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xcd280000-0xcd2fffff]
pci 0000:02:00.0: reg 18 io port: [0x3000-0x301f]
pci 0000:02:00.0: reg 1c 32bit mmio: [0xcd200000-0xcd203fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0xcd300000-0xcd37ffff]
pci 0000:02:00.1: reg 18 io port: [0x3020-0x303f]
pci 0000:02:00.1: reg 1c 32bit mmio: [0xcd204000-0xcd207fff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.2: reg 10 32bit mmio: [0xcd380000-0xcd3fffff]
pci 0000:02:00.2: reg 18 io port: [0x3040-0x305f]
pci 0000:02:00.2: reg 1c 32bit mmio: [0xcd208000-0xcd20bfff]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.3: reg 10 32bit mmio: [0xcd400000-0xcd47ffff]
pci 0000:02:00.3: reg 18 io port: [0x3060-0x307f]
pci 0000:02:00.3: reg 1c 32bit mmio: [0xcd20c000-0xcd20ffff]
pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:00.3: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xcd200000-0xcd4fffff]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10 64bit mmio: [0xcd544000-0xcd544fff]
pci 0000:05:00.0: reg 18 64bit mmio: [0xcd540000-0xcd543fff]
pci 0000:05:00.0: reg 20 io port: [0x4000-0x40ff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:05:00.1: reg 10 64bit mmio: [0xcd545000-0xcd545fff]
pci 0000:05:00.1: reg 18 64bit mmio: [0xcd548000-0xcd54bfff]
pci 0000:05:00.1: reg 20 io port: [0x4400-0x44ff]
pci 0000:05:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:00:08.0: PCI bridge to [bus 05-05]
pci 0000:00:08.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:08.0: bridge 32bit mmio: [0xcd500000-0xcd5fffff]
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: reg 10 64bit mmio: [0xcd644000-0xcd644fff]
pci 0000:07:00.0: reg 18 64bit mmio: [0xcd640000-0xcd643fff]
pci 0000:07:00.0: reg 20 io port: [0x5000-0x50ff]
pci 0000:07:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:07:00.1: reg 10 64bit mmio: [0xcd645000-0xcd645fff]
pci 0000:07:00.1: reg 18 64bit mmio: [0xcd648000-0xcd64bfff]
pci 0000:07:00.1: reg 20 io port: [0x5400-0x54ff]
pci 0000:07:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:00:0a.0: PCI bridge to [bus 07-07]
pci 0000:00:0a.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xcd600000-0xcd6fffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xcd760000-0xcd77ffff]
pci 0000:08:00.0: reg 14 32bit mmio: [0xcd740000-0xcd75ffff]
pci 0000:08:00.0: reg 18 io port: [0x6000-0x601f]
pci 0000:08:00.0: reg 1c 32bit mmio: [0xcd720000-0xcd723fff]
pci 0000:08:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.1: reg 10 32bit mmio: [0xcd7c0000-0xcd7dffff]
pci 0000:08:00.1: reg 14 32bit mmio: [0xcd7a0000-0xcd7bffff]
pci 0000:08:00.1: reg 18 io port: [0x6020-0x603f]
pci 0000:08:00.1: reg 1c 32bit mmio: [0xcd724000-0xcd727fff]
pci 0000:08:00.1: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:08:00.1: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xcd700000-0xcd7fffff]
pci 0000:09:00.0: reg 10 32bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:09:00.0: reg 14 32bit mmio: [0xce000000-0xce003fff]
pci 0000:09:00.0: reg 18 32bit mmio: [0xcd800000-0xcdffffff]
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 09-09]
pci 0000:00:1c.4: bridge 32bit mmio: [0xcd800000-0xce0fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xcf000000-0xcfffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [0x00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [0x000000-0xffffffffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE8_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE9_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1E._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x500-0x57f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x810-0x81f has been reserved
system 00:04: ioport range 0xca0-0xca1 has been reserved
system 00:04: ioport range 0xca4-0xca7 has been reserved
system 00:04: ioport range 0xca8-0xcab has been reserved
system 00:04: ioport range 0xcae-0xcaf has been reserved
system 00:04: ioport range 0xe00-0xe7f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1100-0x110f has been reserved
system 00:04: ioport range 0x1180-0x11ff has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0xff00-0xff00 has been reserved
system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:04: iomem range 0xfed1c000-0xfed1ffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcd100000-0xcd1fffff
pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc00fffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0x3000-0x3fff
pci 0000:00:03.0: MEM window: 0xcd200000-0xcd4fffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
pci 0000:00:05.0: IO window: disabled
pci 0000:00:05.0: MEM window: disabled
pci 0000:00:05.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
pci 0000:00:08.0: IO window: 0x4000-0x4fff
pci 0000:00:08.0: MEM window: 0xcd500000-0xcd5fffff
pci 0000:00:08.0: PREFETCH window: 0xc0100000-0xc01fffff
pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
pci 0000:00:0a.0: IO window: 0x5000-0x5fff
pci 0000:00:0a.0: MEM window: 0xcd600000-0xcd6fffff
pci 0000:00:0a.0: PREFETCH window: 0xc0200000-0xc02fffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: 0x6000-0x6fff
pci 0000:00:1c.0: MEM window: 0xcd700000-0xcd7fffff
pci 0000:00:1c.0: PREFETCH window: 0xc0300000-0xc04fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.4: IO window: 0x7000-0x7fff
pci 0000:00:1c.4: MEM window: 0xcd800000-0xce0fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000cf000000-0x000000cfffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:fe: resource 0 io: [0x00-0xffff]
pci_bus 0000:fe: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcd100000-0xcd1fffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc00fffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xcd200000-0xcd4fffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xcd500000-0xcd5fffff]
pci_bus 0000:05: resource 2 pref mem [0xc0100000-0xc01fffff]
pci_bus 0000:07: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:07: resource 1 mem: [0xcd600000-0xcd6fffff]
pci_bus 0000:07: resource 2 pref mem [0xc0200000-0xc02fffff]
pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:08: resource 1 mem: [0xcd700000-0xcd7fffff]
pci_bus 0000:08: resource 2 pref mem [0xc0300000-0xc04fffff]
pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:09: resource 1 mem: [0xcd800000-0xce0fffff]
pci_bus 0000:09: resource 2 pref mem [0xcf000000-0xcfffffff]
pci_bus 0000:0a: resource 4 io: [0x00-0xffff]
pci_bus 0000:0a: resource 5 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:08:00.0: Disabling L0s
pci 0000:08:00.1: Disabling L0s
pci 0000:09:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 6940k freed
Simple Boot Flag at 0x7c set to 0x80
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1333037736.704:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 50 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 51 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:08.0: irq 52 for MSI/MSI-X
pcieport 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 53 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0a.0: irq 54 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 55 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:05.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:08.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:0a.0:pcie02: AER service couldn't init device: no _OSC support
vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90019a80000, using 1875k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 62784 bytes
bootsplash: ...found (800x600, 32557 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Fixed MDIO Bus: probed
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
PM: Checking hibernation image partition /dev/disk/by-id/scsi-36003005700d7b88016ff8e0509dcfc57-part2
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:577:288
tty tty21: hash matches
Freeing unused kernel memory: 976k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 356k freed
Freeing unused kernel memory: 1448k freed
SCSI subsystem initialized
Emulex LightPulse Fibre Channel SCSI driver 8.3.5.8.2p
Copyright(c) 2004-2009 Emulex. All rights reserved.
lpfc 0000:05:00.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
lpfc 0000:05:00.0: setting latency timer to 64
scsi0 : on PCI bus 05 device 00 irq 31
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
lpfc 0000:05:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39
lpfc 0000:05:00.1: setting latency timer to 64
scsi1 : on PCI bus 05 device 01 irq 39
lpfc 0000:05:00.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x10 x0 x0 x0 0
scsi 0:0:0:0: Direct-Access DGC LUNZ 0430 PQ: 0 ANSI: 4
scsi 0:0:1:0: Direct-Access DGC LUNZ 0430 PQ: 0 ANSI: 4
scsi 0:0:2:0: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 0:0:2:1: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 0:0:2:2: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 0:0:2:3: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 0:0:2:4: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
lpfc 0000:07:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
lpfc 0000:07:00.0: setting latency timer to 64
scsi2 : on PCI bus 07 device 00 irq 33
lpfc 0000:07:00.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31
lpfc 0000:07:00.1: setting latency timer to 64
scsi3 : on PCI bus 07 device 01 irq 31
lpfc 0000:07:00.0: 2:1303 Link Up Event x1 received Data: x1 xf7 x10 x0 x0 x0 0
scsi 2:0:0:0: Direct-Access DGC LUNZ 0430 PQ: 0 ANSI: 4
scsi 2:0:1:0: Direct-Access DGC LUNZ 0430 PQ: 0 ANSI: 4
scsi 2:0:1:1: Direct-Access DGC RAID 5 0430 PQ: 0 ANSI: 4
scsi 2:0:2:0: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 2:0:2:1: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 2:0:2:2: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 2:0:2:3: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
scsi 2:0:2:4: Direct-Access EMC SYMMETRIX 5874 PQ: 0 ANSI: 4
megasas: 00.00.05.40 Wed. Jun. 29 17:00:00 PDT 2011
megasas: 0x1000:0x0079:0x1734:0x1176: bus 1:slot 0:func 0
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
megaraid_sas 0000:01:00.0: setting latency timer to 64
megasas: FW now in Ready state
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
megaraid_sas 0000:01:00.0: irq 57 for MSI/MSI-X
megasas: cpx is not supported.
megasas: INIT adapter done
scsi4 : LSI SAS based MegaRAID driver
scsi 4:0:6:0: Direct-Access SEAGATE ST3300657SS 1703 PQ: 0 ANSI: 5
scsi 4:0:7:0: Direct-Access SEAGATE ST3300657SS 1703 PQ: 0 ANSI: 5
scsi 4:2:1:0: Direct-Access LSI RAID 5/6 SAS 6G 2.90 PQ: 0 ANSI: 5
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi5 : ata_piix
scsi6 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 16
ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 16
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi7 : ata_piix
scsi8 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 17
ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 17
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: HL-DT-STDVDRAM_GT30N, FT03, max UDMA/100
ata1.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM_GT30N FT03 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
sd 0:0:0:0: [sda] READ CAPACITY failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] Add. Sense: Logical unit not supported
sd 2:0:1:1: [sdj] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:1:0: [sdb] READ CAPACITY failed
sd 4:2:1:0: [sdp] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 2:0:1:1: [sdj] Write Protect is off
sd 2:0:1:1: [sdj] Mode Sense: 87 00 00 08
sd 2:0:0:0: [sdh] READ CAPACITY failed
sd 2:0:0:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdh] Sense Key : Illegal Request [current]
sd 2:0:0:0: [sdh] Add. Sense: Logical unit not supported
sd 4:2:1:0: [sdp] Write Protect is off
sd 4:2:1:0: [sdp] Mode Sense: 1f 00 10 08
sd 4:2:1:0: [sdp] Write cache: disabled, read cache: disabled, supports DPO and FUA
sd 2:0:1:1: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:1:0: [sdi] READ CAPACITY failed
sd 2:0:1:0: [sdi] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:1:0: [sdi] Sense Key : Illegal Request [current]
sd 2:0:1:0: [sdi] Add. Sense: Logical unit not supported
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sdp:
sd 2:0:0:0: [sdh] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sdh] Asking for cache data failed
sd 2:0:0:0: [sdh] Assuming drive cache: write through
sd 2:0:1:0: [sdi] Test WP failed, assume Write Enabled
sdp1 sdp2 sdp3
sd 2:0:1:0: [sdi] Asking for cache data failed
sd 2:0:1:0: [sdi] Assuming drive cache: write through
sdj:
sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:1:0: [sdb] Sense Key : Illegal Request [current]
sd 0:0:1:0: [sdb] Add. Sense: Logical unit not supported
sd 0:0:0:0: [sda] READ CAPACITY failed
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] Add. Sense: Logical unit not supported
sd 2:0:0:0: [sdh] READ CAPACITY failed
sd 2:0:0:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdh] Sense Key : Illegal Request [current]
sd 2:0:0:0: [sdh] Add. Sense: Logical unit not supported
sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
sd 2:0:0:0: [sdh] Test WP failed, assume Write Enabled
sd 0:0:0:0: [sda] Asking for cache data failed
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sdh] Asking for cache data failed
sd 2:0:0:0: [sdh] Assuming drive cache: write through
sd 2:0:0:0: [sdh] Attached SCSI disk
sd 0:0:1:0: [sdb] Test WP failed, assume Write Enabled
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdi] READ CAPACITY failed
sd 2:0:1:0: [sdi] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:1:0: [sdi] Sense Key : Illegal Request [current]
sd 2:0:1:0: [sdi] Add. Sense: Logical unit not supported
sd 0:0:1:0: [sdb] Asking for cache data failed
sd 0:0:1:0: [sdb] Assuming drive cache: write through
sdj1 sdj9
sd 2:0:1:0: [sdi] Test WP failed, assume Write Enabled
sd 2:0:1:0: [sdi] Asking for cache data failed
sd 2:0:1:0: [sdi] Assuming drive cache: write through
sd 2:0:1:0: [sdi] Attached SCSI disk
sd 2:0:1:1: [sdj] Attached SCSI disk
sd 0:0:1:0: [sdb] READ CAPACITY failed
sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:1:0: [sdb] Sense Key : Illegal Request [current]
sd 0:0:1:0: [sdb] Add. Sense: Logical unit not supported
sd 0:0:1:0: [sdb] Test WP failed, assume Write Enabled
sd 0:0:1:0: [sdb] Asking for cache data failed
sd 0:0:1:0: [sdb] Assuming drive cache: write through
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:2:0: [sdc] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:2:3: [sdf] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:2:1: [sdd] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:2:2: [sde] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 0:0:2:4: [sdg] 235923840 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:2:3: [sdf] Write Protect is off
sd 0:0:2:1: [sdd] Write Protect is off
sd 0:0:2:1: [sdd] Mode Sense: 8b 00 00 08
sd 0:0:2:2: [sde] Write Protect is off
sd 0:0:2:2: [sde] Mode Sense: 8b 00 00 08
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 8b 00 00 08
sd 0:0:2:3: [sdf] Mode Sense: 8b 00 00 08
sd 0:0:2:4: [sdg] Write Protect is off
sd 0:0:2:4: [sdg] Mode Sense: 8b 00 00 08
sd 0:0:2:1: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:2: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:3: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:4: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:2:0: [sdk] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:2:1: [sdl] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:2:2: [sdm] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:2:3: [sdn] 209717760 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:2:4: [sdo] 235923840 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:2:0: [sdk] Write Protect is off
sd 2:0:2:0: [sdk] Mode Sense: 8b 00 00 08
sd 2:0:2:1: [sdl] Write Protect is off
sd 2:0:2:2: [sdm] Write Protect is off
sd 2:0:2:1: [sdl] Mode Sense: 8b 00 00 08
sd 2:0:2:2: [sdm] Mode Sense: 8b 00 00 08
sd 2:0:2:3: [sdn] Write Protect is off
sd 2:0:2:3: [sdn] Mode Sense: 8b 00 00 08
sd 2:0:2:4: [sdo] Write Protect is off
sd 2:0:2:4: [sdo] Mode Sense: 8b 00 00 08
sd 2:0:2:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:2:2: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:2:1: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde:
sd 2:0:2:4: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:2:3: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sdf:
sdg:
sd 4:2:1:0: [sdp] Attached SCSI disk
unknown partition table
unknown partition table
sdn:
sdm:
sdo:
sdk:
sdd:
sdl:
sd 0:0:2:2: [sde] Attached SCSI disk
unknown partition table
sd 0:0:2:0: [sdc] Attached SCSI disk
unknown partition table
sd 2:0:2:2: [sdm] Attached SCSI disk
sd 2:0:2:0: [sdk] Attached SCSI disk
unknown partition table
unknown partition table
sd 0:0:2:3: [sdf] Attached SCSI disk
sd 2:0:2:3: [sdn] Attached SCSI disk
unknown partition table
sd 0:0:2:1: [sdd] Attached SCSI disk
unknown partition table
sd 2:0:2:1: [sdl] Attached SCSI disk
unknown partition table
unknown partition table
sd 0:0:2:4: [sdg] Attached SCSI disk
sd 2:0:2:4: [sdo] Attached SCSI disk
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xcd000000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.45-0.3-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcd001000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.45-0.3-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.45-0.3-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PM: Marking nosave pages: 000000000009c000 - 0000000000100000
PM: Marking nosave pages: 00000000bf6a0000 - 0000000100000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:242 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 5-1: new full speed USB device using uhci_hcd and address 2
kjournald starting. Commit interval 15 seconds
usb 5-1: New USB device found, idVendor=0000, idProduct=0000
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: iRMC USB Device
usb 5-1: Manufacturer: Fujitsu
usb 5-1: SerialNumber: 60017214130304
usb 5-1: configuration #1 chosen from 1 choice
EXT3 FS on sdp3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver hiddev
input: Fujitsu iRMC USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0
generic-usb 0003:0000:0000.0001: input,hidraw0: USB HID v1.11 Keyboard [Fujitsu iRMC USB Device] on usb-0000:00:1a.2-1/input0
input: Fujitsu iRMC USB Device as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input1
generic-usb 0003:0000:0000.0002: input,hidraw1: USB HID v1.11 Mouse [Fujitsu iRMC USB Device] on usb-0000:00:1a.2-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
udevd version 128 started
ACPI: AC Adapter [PSD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
dca service started, version 1.12.1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:2:1: Attached scsi generic sg3 type 0
sd 0:0:2:2: Attached scsi generic sg4 type 0
sd 0:0:2:3: Attached scsi generic sg5 type 0
sd 0:0:2:4: Attached scsi generic sg6 type 0
sd 2:0:0:0: Attached scsi generic sg7 type 0
sd 2:0:1:0: Attached scsi generic sg8 type 0
sd 2:0:1:1: Attached scsi generic sg9 type 0
sd 2:0:2:0: Attached scsi generic sg10 type 0
sd 2:0:2:1: Attached scsi generic sg11 type 0
sd 2:0:2:2: Attached scsi generic sg12 type 0
sd 2:0:2:3: Attached scsi generic sg13 type 0
sd 2:0:2:4: Attached scsi generic sg14 type 0
sd 4:2:1:0: Attached scsi generic sg15 type 0
scsi 5:0:0:0: Attached scsi generic sg16 type 5
iTCO_vendor_support: vendor-support=0
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
igb 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
igb 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.0: irq 66 for MSI/MSI-X
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
input: PC Speaker as /devices/platform/pcspkr/input/input4
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
power_meter ACPI000D:00: Found ACPI power meter.
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:19:99:9e:fd:21
igb 0000:02:00.0: eth0: PBA No: d2745a-011
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
igb 0000:02:00.1: setting latency timer to 64
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.1: irq 75 for MSI/MSI-X
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:19:99:9e:fd:22
igb 0000:02:00.1: eth1: PBA No: d2745a-011
igb 0000:02:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35
igb 0000:02:00.2: setting latency timer to 64
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.2: irq 84 for MSI/MSI-X
igb 0000:02:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.2: eth2: (PCIe:2.5Gb/s:Width x4) 00:19:99:9e:fd:23
igb 0000:02:00.2: eth2: PBA No: d2745a-011
igb 0000:02:00.2: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: PCI INT D -> GSI 36 (level, low) -> IRQ 36
igb 0000:02:00.3: setting latency timer to 64
alloc irq_desc for 85 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 86 for MSI/MSI-X
alloc irq_desc for 87 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 87 for MSI/MSI-X
alloc irq_desc for 88 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node -1
alloc kstat_irqs on node -1
igb 0000:02:00.3: irq 93 for MSI/MSI-X
igb 0000:02:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.3: eth3: (PCIe:2.5Gb/s:Width x4) 00:19:99:9e:fd:24
igb 0000:02:00.3: eth3: PBA No: d2745a-011
igb 0000:02:00.3: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:08:00.0: setting latency timer to 64
alloc irq_desc for 94 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 97 for MSI/MSI-X
alloc irq_desc for 98 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 99 for MSI/MSI-X
alloc irq_desc for 100 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 100 for MSI/MSI-X
alloc irq_desc for 101 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 101 for MSI/MSI-X
alloc irq_desc for 102 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.0: irq 102 for MSI/MSI-X
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:19:99:98:eb:26
igb 0000:08:00.0: eth4: PBA No: 313130-032
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:08:00.1: setting latency timer to 64
alloc irq_desc for 103 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 104 for MSI/MSI-X
alloc irq_desc for 105 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 105 for MSI/MSI-X
alloc irq_desc for 106 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 106 for MSI/MSI-X
alloc irq_desc for 107 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node -1
alloc kstat_irqs on node -1
igb 0000:08:00.1: irq 111 for MSI/MSI-X
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:19:99:98:eb:27
igb 0000:08:00.1: eth5: PBA No: 313130-032
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
Adding 41937672k swap on /dev/sdp2. Priority:-1 extents:1 across:41937672k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 15 seconds
EXT3 FS on sdp1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x13
Microcode Update Driver: v2.00 , Peter Oruba
P-state transition latency capped at 20 uS
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
igb: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth4: no IPv6 routers present
eth1: no IPv6 routers present
rport-0:0-5: blocked FC remote port time out: removing rport
rport-2:0-5: blocked FC remote port time out: removing rport
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath: Cannot access device path 8:240: -16
device-mapper: table: 253:0: multipath: error getting device
device-mapper: ioctl: error adding target to table
device-mapper: multipath: Cannot access device path 8:240: -16
device-mapper: table: 253:0: multipath: error getting device
device-mapper: ioctl: error adding target to table
sd 2:0:1:1: emc: detected Clariion CX4-480, flags 0
sd 2:0:1:1: emc: ALUA failover mode detected
sd 2:0:1:1: emc: connected to SP A Port 0 (owned, default SP A)
emc: device handler registered
sd 2:0:1:1: emc: ALUA failover mode detected
sd 2:0:1:1: emc: at SP A Port 0 (owned, default SP A)
ata1.00: hard resetting link
ata1.01: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: configured for UDMA/100
ata1: EH complete
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: EH complete
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 300)
ata4: EH complete
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: Unrecognized mount option "default" or missing value
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JBD: barrier-based sync failed on dm-2 - disabling barriers
device-mapper: multipath: Cannot access device path 8:240: -16
device-mapper: table: 253:5: multipath: error getting device
device-mapper: ioctl: error adding target to table
device-mapper: multipath: Cannot access device path 8:240: -16
device-mapper: table: 253:5: multipath: error getting device
device-mapper: ioctl: error adding target to table