dmesg - R210-linux-system
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@c6b6.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Fri May 20 03:51:51 BST 2011
Command line: ro root=/dev/mapper/vg_livecd-lv_root rd_LVM_LV=vg_livecd/lv_root rd_LVM_LV=vg_livecd/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000096400 (usable)
BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf63f000 (usable)
BIOS-e820: 00000000bf63f000 - 00000000bf6bf000 (reserved)
BIOS-e820: 00000000bf6bf000 - 00000000bf7bf000 (ACPI NVS)
BIOS-e820: 00000000bf7bf000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.7 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BF800000 mask FFF800000 uncachable
3 base 0FFC00000 mask FFFC00000 write-protect
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask E00000000 write-back
6 base 400000000 mask FC0000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4092MB, range: 4MB, type WP
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
total RAM covered: 16376M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000440000000
0100000000 - 0440000000 page 2M
kernel direct mapping tables up to 440000000 @ a000-1c000
RAMDISK: 372c0000 - 37fefb49
ACPI: RSDP 00000000000fe020 00024 (v02 DELL )
ACPI: XSDT 00000000bf7fe170 000A4 (v01 DELL PE_SC3 00000001 DELL 00040000)
ACPI: FACP 00000000bf7fb000 000F4 (v04 DELL PE_SC3 00000001 DELL 00040000)
ACPI: DSDT 00000000bf7f1000 06039 (v01 DELL PE_SC3 00000000 DELL 00040000)
ACPI: FACS 00000000bf76e000 00040
ACPI: SPMI 00000000bf7fd000 00040 (v05 DELL PE_SC3 00000001 DELL 00040000)
ACPI: ASF! 00000000bf7fc000 000A5 (v32 DELL PE_SC3 00000001 DELL 00040000)
ACPI: HPET 00000000bf7fa000 00038 (v01 DELL PE_SC3 00000001 DELL 00040000)
ACPI: APIC 00000000bf7f9000 00092 (v02 DELL PE_SC3 00000001 DELL 00040000)
ACPI: MCFG 00000000bf7f8000 0003C (v01 DELL PE_SC3 00000001 DELL 00040000)
ACPI: BOOT 00000000bf7ee000 00028 (v01 DELL PE_SC3 00000001 DELL 00040000)
ACPI: SSDT 00000000bf7ed000 002F6 (v01 DELL PE_SC3 00001000 DELL 00040000)
ACPI: ASPT 00000000bf7ea000 00034 (v07 DELL PE_SC3 00000001 DELL 00040000)
ACPI: SSDT 00000000bf7e9000 00780 (v01 DELL PE_SC3 00003000 DELL 00040000)
ACPI: SSDT 00000000bf7e8000 00996 (v01 DELL PE_SC3 00003000 DELL 00040000)
ACPI: DMAR 00000000bf7e7000 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: HEST 00000000bf7e6000 000A8 (v01 DELL PE_SC3 00000000 DELL 00040000)
ACPI: ERST 00000000bf7e5000 00230 (v01 DELL PE_SC3 00000000 DELL 00040000)
ACPI: BERT 00000000bf7e4000 00030 (v01 DELL PE_SC3 00000000 DELL 00040000)
ACPI: EINJ 00000000bf7e3000 00130 (v01 DELL PE_SC3 00000000 DELL 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
NODE_DATA [0000000000017000 - 000000000004afff]
bootmap [0000000000100000 - 0000000000187fff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 0440000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c9eff8] TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
#3 [00372c0000 - 0037fefb49] RAMDISK ==> [00372c0000 - 0037fefb49]
#4 [0000096400 - 0000100000] BIOS reserved ==> [0000096400 - 0000100000]
#5 [0001c9f000 - 0001c9f2e0] BRK ==> [0001c9f000 - 0001c9f2e0]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000017000] PGTABLE ==> [000000a000 - 0000017000]
found SMP MP-table at [ffff8800000fe1b0] fe1b0
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 17408MB)
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x00000096
0: 0x00000100 -> 0x000bf63f
0: 0x000bf7ff -> 0x000bf800
0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4191701
DMA zone: 56 pages used for memmap
DMA zone: 123 pages reserved
DMA zone: 3810 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765560 pages, LIFO batch:31
Normal zone: 46592 pages used for memmap
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000096000 - 0000000000097000
PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf63f000 - 00000000bf6bf000
PM: Registered nosave memory: 00000000bf6bf000 - 00000000bf7bf000
PM: Registered nosave memory: 00000000bf7bf000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u262144
pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4130650
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_livecd-lv_root rd_LVM_LV=vg_livecd/lv_root rd_LVM_LV=vg_livecd/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=129M@0M rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16311292k/17825792k available (4935k kernel code, 1058988k absent, 455512k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 167772160 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 3093.254 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.50 BogoMIPS (lpj=3093254)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
IOMMU fed91000: ver 1:0 cap c9008020660262 ecap f010da
DMAR: RMRR base: 0x000000bf65a000 end: 0x000000bf65bfff
DMAR: No ATSR found
IOAPIC id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled Interrupt-remapping
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz stepping 07
Booting Node 0, Processors #1
CPU1: Thermal monitoring handled by SMI
#2
CPU2: Thermal monitoring handled by SMI
#3
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (24741.97 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xc5206000-0xc52063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xc5205000-0xc52053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x3048-0x304f]
pci 0000:00:1f.2: reg 14 io port: [0x3054-0x3057]
pci 0000:00:1f.2: reg 18 io port: [0x3040-0x3047]
pci 0000:00:1f.2: reg 1c io port: [0x3050-0x3053]
pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xc5204000-0xc52047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xc5202000-0xc52020ff]
pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc5140000-0xc514ffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xc5100000-0xc513ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff00000-0xffffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xc5100000-0xc51fffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xc1ffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xc2000000-0xc3ffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff]
pci 0000:03:03.0: reg 10 32bit mmio pref: [0xc4000000-0xc47fffff]
pci 0000:03:03.0: reg 14 32bit mmio: [0xc5000000-0xc5003fff]
pci 0000:03:03.0: reg 18 32bit mmio: [0xc4800000-0xc4ffffff]
pci 0000:03:03.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xc4800000-0xc50fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc4000000-0xc47fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 *14 15)
vgaarb: device added: PCI:0000:03:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
alloc irq_2_iommu on node 0
hpet: hpet2 irq 24 for MSI
alloc irq_2_iommu on node 0
hpet: hpet3 irq 25 for MSI
alloc irq_2_iommu on node 0
hpet: hpet4 irq 26 for MSI
alloc irq_2_iommu on node 0
hpet: hpet5 irq 27 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x1000-0x100f has been reserved
system 00:06: ioport range 0x1010-0x1013 has been reserved
system 00:06: ioport range 0xffff-0xffff has been reserved
system 00:06: ioport range 0x400-0x453 has been reserved
system 00:06: ioport range 0x458-0x47f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x164e-0x164f has been reserved
system 00:08: ioport range 0x454-0x457 has been reserved
system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0b: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0b: iomem range 0xff000000-0xffffffff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xc5300000-0xc5300fff has been reserved
pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff00000-0xffffffff]
pci 0000:03:03.0: BAR 6: address space collision on of device [0xffff0000-0xffffffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [0x2000-0x2fff]
pci 0000:00:01.0: bridge window [0xc5100000-0xc51fffff]
pci 0000:00:01.0: bridge window [0xc5400000-0xc54fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [0xc0000000-0xc3ffffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xc4800000-0xc50fffff]
pci 0000:00:1e.0: bridge window [0xc4000000-0xc47fffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xc5100000-0xc51fffff]
pci_bus 0000:01: resource 2 pref mem [0xc5400000-0xc54fffff]
pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc3ffffff]
pci_bus 0000:03: resource 1 mem: [0xc4800000-0xc50fffff]
pci_bus 0000:03: resource 2 pref mem [0xc4000000-0xc47fffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:03:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13502k freed
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1331284790.529:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31884
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B5BD89AA2E85EC04
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [FAN2] (off)
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [FAN3] (off)
fan PNP0C0B:04: registered as cooling_device4
ACPI: Fan [FAN4] (off)
ACPI: SSDT 00000000bf656718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device5
ACPI: SSDT 00000000bf657a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
ACPI: SSDT 00000000bf655d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
processor LNXCPU:01: registered as cooling_device6
processor LNXCPU:02: registered as cooling_device7
processor LNXCPU:03: registered as cooling_device8
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (30 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc5206000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc5205000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:07: setting system clock to 2012-03-09 09:19:52 UTC (1331284792)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc5204000 port 0xc5204100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xc5204000 port 0xc5204180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xc5204000 port 0xc5204200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xc5204000 port 0xc5204280 irq 32
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 32
ata6: SATA max UDMA/133 abar m2048@0xc5204000 port 0xc5204380 irq 32
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1.1: new low speed USB device using ehci_hcd and address 3
usb 2-1.1: New USB device found, idVendor=1267, idProduct=0103
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.1: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
generic-usb 0003:1267:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.0-1.1/input0
input: HID 1267:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
generic-usb 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.0-1.1/input1
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.5: new high speed USB device using ehci_hcd and address 4
usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.5: configuration #1 chosen from 1 choice
hub 2-1.5:1.0: USB hub found
hub 2-1.5:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ATAPI: PLDS DVD-ROM DS-8D3SH, HD51, max UDMA/100, ATAPI AN
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM PLDS DVD-ROM DS-8D3SH HD51 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
mpt2sas version 05.100.00.02 loaded
scsi6 : Fusion MPT SAS Host
mpt2sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mpt2sas 0000:01:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16326016 kB)
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
mpt2sas 0000:01:00.0: irq 33 for MSI/MSI-X
mpt2sas0: PCI-MSI-X enabled: IRQ 33
mpt2sas0: iomem(0x00000000c5140000), mapped(0xffffc90012640000), size(65536)
mpt2sas0: ioport(0x0000000000002000), size(256)
mpt2sas0: sending diag reset !!
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(1154 kB)
mpt2sas0: Current Controller Queue Depth(499), Max Controller Queue Depth(2607)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.02.03.00)
mpt2sas0: Dell PERC H200 Adapter: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1D)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5782bcb074b82200), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 6:0:0:0: Direct-Access ATA WDC WD2003FYYS-1 1D02 PQ: 0 ANSI: 5
scsi 6:0:0:0: SATA: handle(0x000a), sas_addr(0x4433221107000000), device_name(0x4ee65001292d01d2)
scsi 6:0:0:0: SATA: enclosure_logical_id(0x5782bcb074b82200), slot(0)
scsi 6:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:0:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
scsi 6:0:1:0: Direct-Access ATA WDC WD2003FYYS-1 1D02 PQ: 0 ANSI: 5
scsi 6:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221106000000), device_name(0x4ee65001d09fac7c)
scsi 6:0:1:0: SATA: enclosure_logical_id(0x5782bcb074b82200), slot(1)
scsi 6:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 6:0:1:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 6:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 7f 00 00 08
sd 6:0:1:0: [sdb] Write Protect is off
sd 6:0:1:0: [sdb] Mode Sense: 7f 00 00 08
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb:
sda1 sda2
sd 6:0:1:0: [sdb] Attached SCSI disk
sd 6:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_livecd/lv_root vg_livecd/lv_swap
dracut: inactive '/dev/vg_livecd/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_livecd/lv_home' [1.75 TiB] inherit
dracut: inactive '/dev/vg_livecd/lv_swap' [17.70 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_livecd-lv_root
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1331284804.925:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 147
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.8-j15 (Feb 15, 2010)
bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem c0000000, IRQ 16, node addr d0:67:e5:f0:87:1b
bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j15.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j10.fw
eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem c2000000, IRQ 17, node addr d0:67:e5:f0:87:1c
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x3000-0x301f] conflicts with ACPI region SMBI [0x3000-0x300f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sr 4:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:1:0: Attached scsi generic sg2 type 0
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): mounted filesystem with ordered data mode
Adding 18563064k swap on /dev/mapper/vg_livecd-lv_swap. Priority:-1 extents:1 across:18563064k
Adding 1023992k swap on /home/swap. Priority:-2 extents:5 across:1056760k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.0: irq 42 for MSI/MSI-X
bnx2: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 46 for MSI/MSI-X
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:02:00.1: irq 51 for MSI/MSI-X
bnx2: eth1: using MSIX
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
eth0: no IPv6 routers present
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
bnx2 0000:02:00.0: irq 34 for MSI/MSI-X
bnx2 0000:02:00.0: irq 35 for MSI/MSI-X
bnx2 0000:02:00.0: irq 36 for MSI/MSI-X
bnx2 0000:02:00.0: irq 37 for MSI/MSI-X
bnx2 0000:02:00.0: irq 38 for MSI/MSI-X
bnx2 0000:02:00.0: irq 39 for MSI/MSI-X
bnx2 0000:02:00.0: irq 40 for MSI/MSI-X
bnx2 0000:02:00.0: irq 41 for MSI/MSI-X
bnx2 0000:02:00.0: irq 42 for MSI/MSI-X
bnx2: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team