dmesg - iozone_zcache_lzo_nofrontswap
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-toi-zcache-snappy-05154-g45f1f7d (root@deneb) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP PREEMPT Thu Jan 5 23:32:35 CET 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer Aspire 5710Z /Acadia, BIOS V1.50 07/17/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00f6d60] f6d60
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 36b74000 - 375b2000
[ 0.000000] ACPI: RSDP 000f6cb0 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 3f6849b4 00084 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: APIC 3f68bbf6 00068 (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 3f68bc5e 00038 (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f68bc96 0003C (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 3f68bcd2 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
[ 0.000000] ACPI: DBGP 3f68be48 00034 (v01 Acer Acadia 06040000 LOHR 00000000)
[ 0.000000] ACPI: FACP 3f68be7c 000F4 (v03 Acer Acadia 06040000 LOHR 00000001)
[ 0.000000] ACPI: DSDT 3f685c9c 05EE6 (v01 Acer CALISTGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 3f68cfc0 00040
[ 0.000000] ACPI: APIC 3f68bf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f68bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 3f685a92 0020A (v01 SataRe SataAhci 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684faa 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684f04 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684a38 004CC (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f680
[ 0.000000] On node 0 totalpages: 259599
[ 0.000000] free_area_init_node: node 0, pgdat c15a0b80, node_mem_map f6384200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32132 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s29952 r0 d23296 u2097152
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257569
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-toi-zcache-snappy-05154-g45f1f7d root=/dev/sda6 ro quiet i8042.nomux i8042.reset splash init=/bin/systemd pcie_aspm=force zcache nofrontswap
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4155136 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f680)
[ 0.000000] Memory: 1007948k/1038848k available (3764k kernel code, 30448k reserved, 2027k data, 372k init, 129544k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc15a9000 - 0xc1606000 ( 372 kB)
[ 0.000000] .data : 0xc13ad183 - 0xc15a8100 (2027 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13ad183 (3764 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1862.030 MHz processor.
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=1862030)
[ 0.001008] pid_max: default: 32768 minimum: 301
[ 0.001041] Security Framework initialized
[ 0.001062] Mount-cache hash table entries: 512
[ 0.001229] Initializing cgroup subsys debug
[ 0.001233] Initializing cgroup subsys cpuacct
[ 0.001239] Initializing cgroup subsys memory
[ 0.001249] Initializing cgroup subsys devices
[ 0.001252] Initializing cgroup subsys freezer
[ 0.001255] Initializing cgroup subsys blkio
[ 0.001284] Disabled fast string operations
[ 0.001290] CPU: Physical Processor ID: 0
[ 0.001292] CPU: Processor Core ID: 0
[ 0.001295] mce: CPU supports 6 MCE banks
[ 0.001306] CPU0: Thermal monitoring enabled (TM1)
[ 0.001311] using mwait in idle threads.
[ 0.001385] ACPI: Core revision 20110623
[ 0.007070] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.008433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018445] CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
[ 0.018998] Performance Events: Core events, core PMU driver.
[ 0.018998] ... version: 1
[ 0.018998] ... bit width: 40
[ 0.018998] ... generic registers: 2
[ 0.018998] ... value mask: 000000ffffffffff
[ 0.018998] ... max period: 000000007fffffff
[ 0.018998] ... fixed-purpose events: 0
[ 0.018998] ... event mask: 0000000000000003
[ 0.030019] CPU 1 irqstacks, hard=f5896000 soft=f58a0000
[ 0.030023] Booting Node 0, Processors #1 Ok.
[ 0.030026] smpboot cpu 1: start_ip = 9b000
[ 0.001999] Initializing CPU#1
[ 0.001999] Disabled fast string operations
[ 0.102015] Brought up 2 CPUs
[ 0.102019] Total of 2 processors activated (7447.92 BogoMIPS).
[ 0.103055] devtmpfs: initialized
[ 0.103155] PM: Registering ACPI NVS region at 3f680000 (524288 bytes)
[ 0.103359] print_constraints: dummy:
[ 0.103359] NET: Registered protocol family 16
[ 0.104032] ACPI: bus type pci registered
[ 0.104058] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.104058] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.104058] PCI: Using MMCONFIG for extended config space
[ 0.104058] PCI: Using configuration type 1 for base access
[ 0.109043] bio: create slab at 0
[ 0.109061] ACPI: Added _OSI(Module Device)
[ 0.109061] ACPI: Added _OSI(Processor Device)
[ 0.109061] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109061] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111038] ACPI: EC: Look up EC in DSDT
[ 0.114156] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.114790] ACPI: SSDT 3f685750 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.115159] ACPI: Dynamic OEM Table Load:
[ 0.115163] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.115317] ACPI: SSDT 3f685209 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.115657] ACPI: Dynamic OEM Table Load:
[ 0.115661] ACPI: SSDT (null) 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.115925] ACPI: SSDT 3f6859ca 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.116287] ACPI: Dynamic OEM Table Load:
[ 0.116291] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.116397] ACPI: SSDT 3f6856cb 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.116738] ACPI: Dynamic OEM Table Load:
[ 0.116742] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.117101] ACPI: Interpreter enabled
[ 0.117111] ACPI: (supports S0 S3 S4 S5)
[ 0.117132] ACPI: Using IOAPIC for interrupt routing
[ 0.128035] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.192108] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.192190] ACPI: No dock devices found.
[ 0.192197] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.192508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.193599] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.193603] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.193607] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.193611] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.193614] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.193618] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.193622] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.193636] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.193687] pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
[ 0.193701] pci 0000:00:02.0: reg 10: [mem 0xd0300000-0xd037ffff]
[ 0.193709] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f]
[ 0.193717] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.193725] pci 0000:00:02.0: reg 1c: [mem 0xd0400000-0xd043ffff]
[ 0.193766] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.193777] pci 0000:00:02.1: reg 10: [mem 0xd0380000-0xd03fffff]
[ 0.193885] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.193909] pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit]
[ 0.194002] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.194009] pci 0000:00:1b.0: PME# disabled
[ 0.194038] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.194127] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.194133] pci 0000:00:1c.0: PME# disabled
[ 0.194166] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.194255] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.194261] pci 0000:00:1c.2: PME# disabled
[ 0.194293] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.194382] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.194387] pci 0000:00:1c.3: PME# disabled
[ 0.194419] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.194478] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 0.194519] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.194578] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df]
[ 0.194618] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.194676] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff]
[ 0.194720] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.194778] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f]
[ 0.194831] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.194857] pci 0000:00:1d.7: reg 10: [mem 0xd0644000-0xd06443ff]
[ 0.194950] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.194956] pci 0000:00:1d.7: PME# disabled
[ 0.195023] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.195113] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.195229] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.195237] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.195245] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[ 0.195251] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.195295] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.195313] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.195327] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.195340] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.195353] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.195366] pci 0000:00:1f.1: reg 20: [io 0x5090-0x509f]
[ 0.195416] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[ 0.195441] pci 0000:00:1f.2: reg 10: [io 0x5478-0x547f]
[ 0.195454] pci 0000:00:1f.2: reg 14: [io 0x5470-0x5473]
[ 0.195468] pci 0000:00:1f.2: reg 18: [io 0x5468-0x546f]
[ 0.195481] pci 0000:00:1f.2: reg 1c: [io 0x545c-0x545f]
[ 0.195494] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f]
[ 0.195507] pci 0000:00:1f.2: reg 24: [mem 0xd0644400-0xd06447ff]
[ 0.195550] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.195556] pci 0000:00:1f.2: PME# disabled
[ 0.195578] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.195653] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f]
[ 0.195762] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.195873] pci 0000:04:00.0: [14e4:1693] type 0 class 0x000200
[ 0.195906] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit]
[ 0.196056] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.196063] pci 0000:04:00.0: PME# disabled
[ 0.198001] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.198010] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.198106] pci 0000:05:00.0: [168c:001c] type 0 class 0x000200
[ 0.198139] pci 0000:05:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.199997] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.200006] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.200061] pci 0000:06:00.0: [1524:0730] type 0 class 0x000501
[ 0.200087] pci 0000:06:00.0: reg 10: [mem 0xd0200000-0xd020007f]
[ 0.200185] pci 0000:06:00.0: supports D1 D2
[ 0.200188] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.200194] pci 0000:06:00.0: PME# disabled
[ 0.200218] pci 0000:06:00.1: [1524:0750] type 0 class 0x000805
[ 0.200243] pci 0000:06:00.1: reg 10: [mem 0xd0200400-0xd02004ff]
[ 0.200342] pci 0000:06:00.1: supports D1 D2
[ 0.200345] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.200351] pci 0000:06:00.1: PME# disabled
[ 0.200376] pci 0000:06:00.2: [1524:0720] type 0 class 0x000501
[ 0.200402] pci 0000:06:00.2: reg 10: [mem 0xd0200800-0xd020087f]
[ 0.200503] pci 0000:06:00.2: supports D1 D2
[ 0.200506] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
[ 0.200512] pci 0000:06:00.2: PME# disabled
[ 0.200536] pci 0000:06:00.3: [1524:0751] type 0 class 0x000501
[ 0.200562] pci 0000:06:00.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.200662] pci 0000:06:00.3: supports D1 D2
[ 0.200665] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
[ 0.200671] pci 0000:06:00.3: PME# disabled
[ 0.200747] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.200757] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.200766] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.200770] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.200799] pci_bus 0000:00: on NUMA node 0
[ 0.200804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.200994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.201050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.201107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.201180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.201230] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.206061] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 0.206122] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 0.206175] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 0.206229] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 0.206282] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15)
[ 0.206334] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled.
[ 0.206387] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 0.206440] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 0.206479] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.206479] vgaarb: loaded
[ 0.206479] vgaarb: bridge control possible 0000:00:02.0
[ 0.207065] SCSI subsystem initialized
[ 0.207065] libata version 3.00 loaded.
[ 0.208033] wmi: Mapper loaded
[ 0.208033] PCI: Using ACPI for IRQ routing
[ 0.219843] PCI: pci_cache_line_size set to 64 bytes
[ 0.219961] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.219965] reserve RAM buffer: 000000003f680000 - 000000003fffffff
[ 0.220110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.220110] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.221996] Switching to clocksource hpet
[ 0.225930] pnp: PnP ACPI init
[ 0.225952] ACPI: bus type pnp registered
[ 0.226345] pnp 00:00: [bus 00-ff]
[ 0.226350] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.226353] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.226356] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.226359] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.226362] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.226365] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.226369] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.226372] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.226375] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.226378] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.226381] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.226384] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.226388] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.226391] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.226394] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.226397] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.226400] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.226404] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.226407] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.226558] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.226573] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.226581] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.226584] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.226587] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.226590] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.226592] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.226711] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.226716] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.226719] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.226723] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.226727] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.226731] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.226735] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264031] pnp 00:02: [io 0x0000-0x001f]
[ 0.264034] pnp 00:02: [io 0x0081-0x0091]
[ 0.264037] pnp 00:02: [io 0x0093-0x009f]
[ 0.264040] pnp 00:02: [io 0x00c0-0x00df]
[ 0.264043] pnp 00:02: [dma 4]
[ 0.264163] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.264176] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.264276] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.264355] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.264485] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.264490] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.264505] pnp 00:05: [io 0x00f0]
[ 0.264521] pnp 00:05: [irq 13]
[ 0.264622] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.264652] pnp 00:06: [io 0x002e-0x002f]
[ 0.264655] pnp 00:06: [io 0x004e-0x004f]
[ 0.264658] pnp 00:06: [io 0x0061]
[ 0.264660] pnp 00:06: [io 0x0063]
[ 0.264663] pnp 00:06: [io 0x0065]
[ 0.264665] pnp 00:06: [io 0x0067]
[ 0.264668] pnp 00:06: [io 0x0070]
[ 0.264670] pnp 00:06: [io 0x0080]
[ 0.264673] pnp 00:06: [io 0x0092]
[ 0.264675] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.264678] pnp 00:06: [io 0x0800-0x080f]
[ 0.264681] pnp 00:06: [io 0x1000-0x107f]
[ 0.264684] pnp 00:06: [io 0x1180-0x11bf]
[ 0.264686] pnp 00:06: [io 0x1640-0x164f]
[ 0.264689] pnp 00:06: [io 0xfe00-0xfefe]
[ 0.264692] pnp 00:06: [io 0xff2c-0xff2f]
[ 0.264833] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.264839] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.264843] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.264846] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.264850] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.264853] system 00:06: [io 0xff2c-0xff2f] has been reserved
[ 0.264858] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264872] pnp 00:07: [io 0x0070-0x0077]
[ 0.264880] pnp 00:07: [irq 8]
[ 0.264996] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265048] pnp 00:08: [io 0x0060]
[ 0.265051] pnp 00:08: [io 0x0064]
[ 0.265058] pnp 00:08: [irq 1]
[ 0.265161] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.265230] pnp 00:09: [irq 12]
[ 0.265331] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.265397] pnp: PnP ACPI: found 10 devices
[ 0.265400] ACPI: ACPI bus type pnp unregistered
[ 0.307036] PCI: max bus depth: 1 pci_try_num: 2
[ 0.307099] pci 0000:00:1c.3: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307105] pci 0000:00:1c.3: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.307109] pci 0000:00:1c.2: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307114] pci 0000:00:1c.2: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.307118] pci 0000:00:1c.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[ 0.307123] pci 0000:00:1c.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307127] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.307131] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.307136] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.307143] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.307150] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307160] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.307164] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.307172] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.307178] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307187] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.307192] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.307199] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.307205] pci 0000:00:1c.3: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307215] pci 0000:06:00.3: BAR 0: assigned [mem 0xd0200100-0xd02001ff]
[ 0.307223] pci 0000:06:00.3: BAR 0: set to [mem 0xd0200100-0xd02001ff] (PCI address [0xd0200100-0xd02001ff])
[ 0.307227] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.307235] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.307253] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.307275] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.307284] pci 0000:00:1c.0: setting latency timer to 64
[ 0.307297] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.307303] pci 0000:00:1c.2: setting latency timer to 64
[ 0.307316] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.307323] pci 0000:00:1c.3: setting latency timer to 64
[ 0.307330] pci 0000:00:1e.0: enabling device (0004 -> 0006)
[ 0.307337] pci 0000:00:1e.0: setting latency timer to 64
[ 0.307342] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.307345] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.307349] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.307352] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.307356] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307359] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.307362] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.307366] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307369] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.307372] pci_bus 0000:05: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.307376] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307379] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.307382] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.307386] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.307435] NET: Registered protocol family 2
[ 0.307508] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307777] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308555] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308936] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308940] TCP reno registered
[ 0.308946] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.308964] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309137] NET: Registered protocol family 1
[ 0.309161] pci 0000:00:02.0: Boot video device
[ 0.309302] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.309389] Unpacking initramfs...
[ 0.451386] Freeing initrd memory: 10488k freed
[ 0.459342] Simple Boot Flag at 0x36 set to 0x1
[ 0.460904] audit: initializing netlink socket (disabled)
[ 0.460920] type=2000 audit(1325897899.459:1): initialized
[ 0.464170] highmem bounce pool size: 64 pages
[ 0.474637] VFS: Disk quotas dquot_6.5.2
[ 0.474772] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476441] Btrfs loaded
[ 0.476447] msgmni has been set to 1736
[ 0.477458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.477501] io scheduler noop registered
[ 0.477504] io scheduler deadline registered
[ 0.477514] io scheduler cfq registered (default)
[ 0.477678] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.477808] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.477932] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.478443] intel_idle: MWAIT substates: 0x1110
[ 0.478445] intel_idle: does not run on family 6 model 14
[ 0.478568] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.478615] ACPI: Lid Switch [LID]
[ 0.478724] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.478730] ACPI: Sleep Button [SLPB]
[ 0.478840] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.478844] ACPI: Power Button [PWRB]
[ 0.478973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.478977] ACPI: Power Button [PWRF]
[ 0.512112] acpi device:05: registered as cooling_device0
[ 0.512259] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.512266] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.590709] Linux agpgart interface v0.103
[ 0.590768] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.590821] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.591194] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.591430] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.591584] [drm] Initialized drm 1.1.0 20060810
[ 0.591626] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.591632] i915 0000:00:02.0: setting latency timer to 64
[ 0.593720] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.593726] [drm] Driver supports precise vblank timestamp query.
[ 0.593802] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.647651] fixme: max PWM is zero.
[ 0.913232] [drm] initialized overlay support
[ 1.076748] fbcon: inteldrmfb (fb0) is primary device
[ 1.400935] Console: switching to colour frame buffer device 160x50
[ 1.406418] fb0: inteldrmfb frame buffer device
[ 1.406420] drm: registered panic notifier
[ 1.406435] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.407034] ahci 0000:00:1f.2: version 3.0
[ 1.407053] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.407144] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.407149] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.407156] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.408250] scsi0 : ahci
[ 1.408462] scsi1 : ahci
[ 1.408650] scsi2 : ahci
[ 1.408839] scsi3 : ahci
[ 1.409097] ata1: SATA max UDMA/133 abar m1024@0xd0644400 port 0xd0644500 irq 19
[ 1.409100] ata2: DUMMY
[ 1.409102] ata3: DUMMY
[ 1.409104] ata4: DUMMY
[ 1.409496] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.429244] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.429284] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.429638] mousedev: PS/2 mouse device common for all mice
[ 1.429709] I2O subsystem v1.325
[ 1.429712] i2o: max drivers = 8
[ 1.430510] cpuidle: using governor ladder
[ 1.430513] cpuidle: using governor menu
[ 1.430516] zram: num_devices not specified. Using default: 1
[ 1.430519] zram: Creating 1 devices ...
[ 1.430793] zcache: using lzo compressor
[ 1.430925] zcache: cleancache enabled using kernel transcendent memory and compression buddies
[ 1.431188] TCP cubic registered
[ 1.431190] Initializing XFRM netlink socket
[ 1.431201] NET: Registered protocol family 17
[ 1.431211] Registering the dns_resolver key type
[ 1.431237] Using IPI No-Shortcut mode
[ 1.431244] TuxOnIce 3.2 ()
[ 1.431593] Scanning swap devices for TuxOnIce signature...
[ 1.431597] TuxOnIce scan: No image found.
[ 1.451951] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.460016] Refined TSC clocksource calibration: 1861.999 MHz.
[ 1.460023] Switching to clocksource tsc
[ 1.867030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.867612] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.199552] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL150J, max UDMA/100
[ 2.199556] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.200448] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.200645] ata1.00: configured for UDMA/100
[ 2.200815] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL15 PQ: 0 ANSI: 5
[ 2.201123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.201197] sd 0:0:0:0: [sda] Write Protect is off
[ 2.201201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.201231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.201265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.269595] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.270455] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.270465] Scanning swap devices for TuxOnIce signature...
[ 2.341088] - Trying 8:5.
[ 2.342609] TuxOnIce scan: No image found.
[ 2.342863] TuxOnIce: No image found.
[ 2.345220] registered taskstats version 1
[ 2.348441] Freeing unused kernel memory: 372k freed
[ 2.348674] Write protecting the kernel text: 3768k
[ 2.348711] Write protecting the kernel read-only data: 1784k
[ 2.441618] udevd[1204]: starting version 175
[ 2.504446] tg3.c:v3.121 (November 2, 2011)
[ 2.504470] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.504483] tg3 0000:04:00.0: setting latency timer to 64
[ 2.567797] usbcore: registered new interface driver usbfs
[ 2.567833] usbcore: registered new interface driver hub
[ 2.570061] usbcore: registered new device driver usb
[ 2.570680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.570728] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.570749] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.570754] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.570788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.570816] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.570830] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.575039] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.575077] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0644000
[ 2.591719] sdhci: Secure Digital Host Controller Interface driver
[ 2.591723] sdhci: Copyright(c) Pierre Ossman
[ 2.592061] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.592134] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.592138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.592142] usb usb1: Product: EHCI Host Controller
[ 2.592144] usb usb1: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d ehci_hcd
[ 2.592148] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.592405] hub 1-0:1.0: USB hub found
[ 2.592414] hub 1-0:1.0: 8 ports detected
[ 2.592540] ata_piix 0000:00:1f.1: version 2.13
[ 2.592562] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.592617] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.593649] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.595142] scsi4 : ata_piix
[ 2.597026] scsi5 : ata_piix
[ 2.597502] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5090 irq 14
[ 2.597507] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5098 irq 15
[ 2.597714] ata6: port disabled--ignoring
[ 2.597780] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.597794] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.597798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.597818] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.597856] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[ 2.597910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.597914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.597917] usb usb2: Product: UHCI Host Controller
[ 2.597920] usb usb2: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.597923] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.598155] hub 2-0:1.0: USB hub found
[ 2.598162] hub 2-0:1.0: 2 ports detected
[ 2.598260] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.598272] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.598277] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.598286] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.598321] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
[ 2.598368] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.598372] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.598375] usb usb3: Product: UHCI Host Controller
[ 2.598378] usb usb3: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.598381] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.599523] hub 3-0:1.0: USB hub found
[ 2.599531] hub 3-0:1.0: 2 ports detected
[ 2.599640] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.599653] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.599658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.599670] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.599723] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[ 2.599771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.599775] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.599778] usb usb4: Product: UHCI Host Controller
[ 2.599781] usb usb4: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.599784] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.599944] hub 4-0:1.0: USB hub found
[ 2.599950] hub 4-0:1.0: 2 ports detected
[ 2.600060] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.600072] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.600078] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.600092] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.600127] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
[ 2.600173] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.600176] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.600179] usb usb5: Product: UHCI Host Controller
[ 2.600182] usb usb5: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.600185] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.600327] hub 5-0:1.0: USB hub found
[ 2.600333] hub 5-0:1.0: 2 ports detected
[ 2.610803] sdhci-pci 0000:06:00.1: SDHCI controller found [1524:0750] (rev 0)
[ 2.610811] sdhci-pci 0000:06:00.1: found 1 slot(s)
[ 2.610821] sdhci-pci 0000:06:00.1: enabling device (0000 -> 0002)
[ 2.610844] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.610878] sdhci [sdhci_add_host()]: Disabling DMA as it is marked broken
[ 2.610882] sdhci [sdhci_add_host()]: mmc0: Auto-CMD23 unavailable
[ 2.610909] mmc0: no vmmc regulator found
[ 2.610915] sdhci: =========== REGISTER DUMP (mmc0)===========
[ 2.610920] sdhci: Sys addr: 0x00000000 | Version: 0x00000100
[ 2.610926] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 2.610931] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 2.610937] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 2.610942] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 2.610949] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
[ 2.610954] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 2.610961] sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
[ 2.610967] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2.610975] sdhci: Caps: 0x01e021a1 | Caps_1: 0x00000000
[ 2.610985] sdhci: Cmd: 0x00000000 | Max curr: 0x000000ff
[ 2.610988] sdhci: Host ctl2: 0x00000000
[ 2.610990] sdhci: ===========================================
[ 2.611046] Registered led device: mmc0::
[ 2.611080] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.613243] mmc0: SDHCI controller on PCI [0000:06:00.1] using PIO
[ 2.613252] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 2.613257] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.613275] sdhci-pci 0000:06:00.3: SDHCI controller found [1524:0751] (rev 0)
[ 2.613283] sdhci-pci 0000:06:00.3: found 1 slot(s)
[ 2.613294] sdhci-pci 0000:06:00.3: enabling device (0000 -> 0002)
[ 2.613306] sdhci-pci 0000:06:00.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.613341] sdhci [sdhci_add_host()]: Disabling DMA as it is marked broken
[ 2.613345] sdhci [sdhci_add_host()]: mmc1: Auto-CMD23 unavailable
[ 2.613359] mmc1: no vmmc regulator found
[ 2.613365] sdhci: =========== REGISTER DUMP (mmc1)===========
[ 2.613370] sdhci: Sys addr: 0x00000000 | Version: 0x00000100
[ 2.613375] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 2.613381] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 2.613386] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 2.613392] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 2.613397] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
[ 2.613403] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 2.613408] sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
[ 2.613414] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2.613419] sdhci: Caps: 0x01e021a1 | Caps_1: 0x00000000
[ 2.613425] sdhci: Cmd: 0x00000000 | Max curr: 0x000000ff
[ 2.613428] sdhci: Host ctl2: 0x00000000
[ 2.613430] sdhci: ===========================================
[ 2.613471] Registered led device: mmc1::
[ 2.613510] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.615284] mmc1: SDHCI controller on PCI [0000:06:00.3] using PIO
[ 2.624033] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.627821] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1b:38:28:64:1a
[ 2.627827] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.627832] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.627836] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.636044] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.636067] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.636073] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.636086] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.636093] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.638022] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.638043] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.640032] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.642017] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.642037] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.642044] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.642056] mmc0: req failed (CMD5): -123, retrying...
[ 2.642068] mmc0: req failed (CMD5): -123, retrying...
[ 2.642079] mmc0: req failed (CMD5): -123, retrying...
[ 2.642091] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.642098] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.642111] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.642116] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.642129] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.642134] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.642148] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.642153] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.642166] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.642172] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.642181] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.642194] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.642201] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.644026] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 2.644031] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.655029] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.667034] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.667056] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.667062] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.667075] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.667082] mmc0: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.669019] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.669039] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.671038] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.673019] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.673041] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.673048] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.673061] mmc0: req failed (CMD5): -123, retrying...
[ 2.673072] mmc0: req failed (CMD5): -123, retrying...
[ 2.673083] mmc0: req failed (CMD5): -123, retrying...
[ 2.673094] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.673101] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.673115] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.673120] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.673133] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.673138] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.673151] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.673157] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.673170] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.673176] mmc0: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.673185] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.673198] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.673205] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.675051] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 2.675056] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.686020] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.698049] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.698078] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.698085] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.698098] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.698105] mmc0: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.700047] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.700070] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.702015] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.704052] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.704071] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.704077] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.704091] mmc0: req failed (CMD5): -123, retrying...
[ 2.704102] mmc0: req failed (CMD5): -123, retrying...
[ 2.704113] mmc0: req failed (CMD5): -123, retrying...
[ 2.704124] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.704131] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.704144] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.704150] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.704163] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.704168] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.704181] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.704186] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.704199] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.704206] mmc0: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.704214] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.704228] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.704234] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.706024] mmc0: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 2.706029] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.717020] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.729025] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.729048] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.729054] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.729067] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.729074] mmc0: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.731053] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.731078] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.733024] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.735046] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.735071] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.735078] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.735091] mmc0: req failed (CMD5): -123, retrying...
[ 2.735102] mmc0: req failed (CMD5): -123, retrying...
[ 2.735114] mmc0: req failed (CMD5): -123, retrying...
[ 2.735125] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.735133] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.735146] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.735152] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.735165] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.735170] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.735183] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.735189] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.735202] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.735208] mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.735217] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.735230] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.735237] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.737035] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 2.737041] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.748226] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.752430] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.61, max UDMA/33
[ 2.758331] ata5.00: configured for UDMA/33
[ 2.760029] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.760048] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.760059] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.760076] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.760087] mmc1: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.760672] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.61 PQ: 0 ANSI: 5
[ 2.762008] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.762024] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.762927] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.762931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.763110] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.763290] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.764025] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.766026] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.766050] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.766057] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.766070] mmc1: req failed (CMD5): -123, retrying...
[ 2.766081] mmc1: req failed (CMD5): -123, retrying...
[ 2.766092] mmc1: req failed (CMD5): -123, retrying...
[ 2.766104] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.766111] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.766124] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.766129] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.766143] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.766148] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.766161] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.766166] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.766180] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.766186] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.766195] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.766209] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.766215] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.768033] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 2.768039] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.779019] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.791020] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.791041] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.791047] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.791061] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.791067] mmc1: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.793023] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.793038] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.795011] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.797009] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.797026] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.797036] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.797056] mmc1: req failed (CMD5): -123, retrying...
[ 2.797073] mmc1: req failed (CMD5): -123, retrying...
[ 2.797089] mmc1: req failed (CMD5): -123, retrying...
[ 2.797102] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.797113] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.797127] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.797137] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.797151] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.797160] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.797175] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.797184] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.797199] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.797208] mmc1: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.797217] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.797231] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.797242] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.799010] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 2.799014] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.810011] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.822011] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.822025] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.822038] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.822055] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.822066] mmc1: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.824009] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.824023] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.826011] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.828008] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.828022] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.828033] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.828052] mmc1: req failed (CMD5): -123, retrying...
[ 2.828069] mmc1: req failed (CMD5): -123, retrying...
[ 2.828086] mmc1: req failed (CMD5): -123, retrying...
[ 2.828099] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.828110] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.828124] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.828133] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.828147] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.828157] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.828172] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.828181] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.828195] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.828206] mmc1: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.828215] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.828228] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.828239] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.830008] mmc1: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 2.830011] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.841012] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.853011] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.853026] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.853032] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.853044] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.853050] mmc1: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.855007] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.855020] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.857008] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.859007] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.859020] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.859025] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.859037] mmc1: req failed (CMD5): -123, retrying...
[ 2.859047] mmc1: req failed (CMD5): -123, retrying...
[ 2.859057] mmc1: req failed (CMD5): -123, retrying...
[ 2.859068] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.859072] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.859085] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.859089] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.859102] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.859106] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.859119] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.859123] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.859135] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.859140] mmc1: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.859149] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.859161] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.859166] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.049030] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.205354] usb 3-1: New USB device found, idVendor=05e3, idProduct=1205
[ 3.205359] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.205362] usb 3-1: Product: USB Mouse
[ 3.225673] input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
[ 3.225757] generic-usb 0003:05E3:1205.0001: input: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.1-1/input0
[ 3.225784] usbcore: registered new interface driver usbhid
[ 3.225787] usbhid: USB HID core driver
[ 3.511728] PM: Starting manual resume from disk
[ 3.553313] video LNXVIDEO:01: Restoring backlight state
[ 3.559066] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 3.559073] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.570044] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.582014] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.582033] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.582040] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.582053] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.582059] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.584013] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.584027] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.586009] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.588009] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.588023] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.588029] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.588042] mmc0: req failed (CMD5): -123, retrying...
[ 3.588053] mmc0: req failed (CMD5): -123, retrying...
[ 3.588063] mmc0: req failed (CMD5): -123, retrying...
[ 3.588074] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.588081] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.588094] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.588099] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.588112] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.588117] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.588130] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.588135] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.588147] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.588153] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.588162] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.588174] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.588181] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.590009] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 3.590012] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.594788] zcache: created ephemeral tmem pool, id=0, client=65535
[ 3.595021] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.601037] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.613040] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.613065] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.613072] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.613086] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.613093] mmc0: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.615063] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.615082] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.617040] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.619026] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.619044] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.619051] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.619064] mmc0: req failed (CMD5): -123, retrying...
[ 3.619075] mmc0: req failed (CMD5): -123, retrying...
[ 3.619086] mmc0: req failed (CMD5): -123, retrying...
[ 3.619097] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.619104] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.619117] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.619122] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.619135] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.619140] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.619153] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.619158] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.619171] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.619177] mmc0: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.619186] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.619199] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.619206] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.621007] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 3.621011] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.632012] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.645027] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.645049] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.645056] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.645069] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.645076] mmc0: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.647007] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.647021] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.649008] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.651010] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.651024] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.651029] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.651042] mmc0: req failed (CMD5): -123, retrying...
[ 3.651053] mmc0: req failed (CMD5): -123, retrying...
[ 3.651064] mmc0: req failed (CMD5): -123, retrying...
[ 3.651075] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.651082] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.651094] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.651099] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.651112] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.651117] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.651130] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.651135] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.651148] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.651154] mmc0: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.651163] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.651175] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.651182] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.653009] mmc0: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 3.653013] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.664051] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.676014] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.676035] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.676041] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.676054] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.676061] mmc0: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.678008] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.678023] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.680015] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.682016] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.682031] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.682037] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.682050] mmc0: req failed (CMD5): -123, retrying...
[ 3.682061] mmc0: req failed (CMD5): -123, retrying...
[ 3.682072] mmc0: req failed (CMD5): -123, retrying...
[ 3.682083] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.682090] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.682103] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.682108] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.682121] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.682126] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.682139] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.682144] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.682157] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.682163] mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.682171] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.682184] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.682190] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.684013] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 3.684017] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.695012] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.707020] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.707035] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.707041] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.707053] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.707059] mmc1: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.709009] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.709023] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.711010] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.713009] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.713023] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.713027] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.713039] mmc1: req failed (CMD5): -123, retrying...
[ 3.713049] mmc1: req failed (CMD5): -123, retrying...
[ 3.713059] mmc1: req failed (CMD5): -123, retrying...
[ 3.713070] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.713075] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.713087] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.713092] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.713104] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.713108] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.713121] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.713125] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.713137] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.713143] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.713151] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.713163] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.713169] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.715008] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 3.715012] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.726018] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.738015] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.738031] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.738036] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.738049] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.738054] mmc1: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.740009] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.740022] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.742010] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.744010] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.744024] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.744028] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.744040] mmc1: req failed (CMD5): -123, retrying...
[ 3.744050] mmc1: req failed (CMD5): -123, retrying...
[ 3.744060] mmc1: req failed (CMD5): -123, retrying...
[ 3.744071] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.744076] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.744089] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.744093] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.744106] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.744110] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.744122] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.744127] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.744139] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.744145] mmc1: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.744153] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.744165] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.744171] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.746010] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 3.746014] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.757011] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.769021] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.769038] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.769043] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.769055] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.769061] mmc1: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.771008] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.771021] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.773009] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.775007] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.775020] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.775025] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.775037] mmc1: req failed (CMD5): -123, retrying...
[ 3.775046] mmc1: req failed (CMD5): -123, retrying...
[ 3.775056] mmc1: req failed (CMD5): -123, retrying...
[ 3.775067] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.775073] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.775085] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.775090] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.775102] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.775107] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.775119] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.775123] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.775136] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.775141] mmc1: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.775149] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.775161] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.775167] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.777008] mmc1: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 3.777012] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.788011] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.800010] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.800023] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.800028] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.800041] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.800046] mmc1: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.802007] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.802020] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.804009] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.806337] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.806356] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.806361] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.806373] mmc1: req failed (CMD5): -123, retrying...
[ 3.806383] mmc1: req failed (CMD5): -123, retrying...
[ 3.806393] mmc1: req failed (CMD5): -123, retrying...
[ 3.806404] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.806409] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.806422] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.806426] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.806439] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.806443] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.806456] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.806460] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.806472] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.806478] mmc1: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.806487] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.806499] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.806505] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 5.485451] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 5.566110] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; debian)
[ 5.777255] NET: Registered protocol family 10
[ 5.794020] systemd[1]: Set hostname to .
[ 6.785815] systemd[1]: [/etc/init.d/lvm2:3] Failed to add LSB Provides name lvm.service, ignoring: File exists
[ 7.678719] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 7.678929] systemd[1]: Found ordering cycle on network-manager.service/start
[ 7.678935] systemd[1]: Walked on cycle path to atd.service/start
[ 7.678940] systemd[1]: Walked on cycle path to openvpn.service/start
[ 7.678945] systemd[1]: Walked on cycle path to network-manager.service/start
[ 7.678950] systemd[1]: Breaking ordering cycle by deleting job atd.service/start
[ 7.779589] systemd-readahead-replay[1547]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 10.168511] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignored in a future release.
[ 10.168666] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release.
[ 10.168700] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
[ 10.168747] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/irda-utils, it will be ignored in a future release.
[ 10.168781] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/libpisock9, it will be ignored in a future release.
[ 10.168813] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
[ 10.168843] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
[ 10.168881] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[ 10.168911] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/ath_pci, it will be ignored in a future release.
[ 10.168942] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/usbcore, it will be ignored in a future release.
[ 10.168974] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/i915-kms, it will be ignored in a future release.
[ 10.169023] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/alsa-base-blacklist, it will be ignored in a future release.
[ 10.169057] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/linux-sound-base_noOSS, it will be ignored in a future release.
[ 10.169088] modprobe[1567]: WARNING: All config files need .conf: /etc/modprobe.d/madwifi, it will be ignored in a future release.
[ 10.171250] modprobe[1567]: WARNING: Not loading blacklisted module battery
[ 10.190300] Marking TSC unstable due to TSC halts in idle
[ 10.190321] ACPI: acpi_idle registered with cpuidle
[ 10.192506] Switching to clocksource hpet
[ 10.254452] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 10.264104] acer_wmi: Function bitmap for Communication Device: 0x1
[ 10.264113] acer_wmi: Brightness must be controlled by generic video driver
[ 10.967543] systemd[1]: plymouth-start.service: control process exited, code=exited status=69
[ 10.975110] systemd[1]: Unit plymouth-start.service entered failed state.
[ 11.071180] plymouthd[1577]: plymouthd: could not log bootup: Address already in use
[ 13.155507] lm-sensors[1548]: Setting sensors limits.
[ 13.552831] systemd-fsck[1561]: /dev/sda6: clean, 1018669/9846784 files, 18162633/19683633 blocks
[ 14.377769] udevd[1593]: starting version 175
[ 14.560334] zcache: created ephemeral tmem pool, id=1, client=65535
[ 14.560354] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr
[ 15.341765] hibernate[1577]: Invalidating stale software suspend images... done.
[ 15.356988] qemu-kvm[1599]: Your system does not have the CPU extensions required to use KVM. Not doing anything. ... failed!
[ 15.456806] ifupdown-clean[1610]: Cleaning up ifupdown....
[ 15.641521] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:14
[ 15.641534] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:14'
[ 15.641541] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:17
[ 15.641549] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:17'
[ 15.641556] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:20
[ 15.641563] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:20'
[ 15.641570] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:23
[ 15.641577] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:23'
[ 15.641584] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:26
[ 15.641592] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:26'
[ 15.641598] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:29
[ 15.641707] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:29'
[ 15.641715] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:32
[ 15.641722] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:32'
[ 15.641729] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:35
[ 15.641737] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:35'
[ 15.641743] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:38
[ 15.641751] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:38'
[ 15.641758] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:41
[ 15.641765] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:41'
[ 15.641771] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:44
[ 15.641778] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:44'
[ 15.641922] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:47
[ 15.641931] udevd[1593]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:47'
[ 15.716514] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:6
[ 15.716527] udevd[1593]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:6'
[ 15.716535] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:9
[ 15.716542] udevd[1593]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:9'
[ 15.716549] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:12
[ 15.716557] udevd[1593]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:12'
[ 15.716564] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:15
[ 15.716571] udevd[1593]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:15'
[ 15.911925] lvm2[1602]: Setting up LVM Volume Groups /dev/mapper/control: open failed: No such device
[ 15.911996] lvm2[1602]: Failure to communicate with kernel device-mapper driver.
[ 15.912092] lvm2[1602]: Check that device-mapper is available in the kernel.
[ 15.950411] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:14
[ 15.950447] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:14'
[ 15.950478] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:17
[ 15.950505] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:17'
[ 15.950534] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:20
[ 15.950560] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:20'
[ 15.950589] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:23
[ 15.950615] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:23'
[ 15.950644] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:26
[ 15.950671] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:26'
[ 15.950699] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:29
[ 15.950726] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:29'
[ 15.950754] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:32
[ 15.950780] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:32'
[ 15.950809] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:35
[ 15.950835] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:35'
[ 15.950864] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:38
[ 15.950890] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:38'
[ 15.950918] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:41
[ 15.950945] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:41'
[ 15.950974] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:44
[ 15.951018] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:44'
[ 15.951050] udevd[1593]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:47
[ 15.951076] udevd[1593]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:47'
[ 15.993529] lvm2[1602]: Reading all physical volumes. This may take a while...
[ 16.012517] hdparm[1604]: Setting parameters of disc: (none).
[ 16.384136] lvm2[1602]: No volume groups found
[ 16.390183] lvm2[1602]: /dev/mapper/control: open failed: No such device
[ 16.390253] lvm2[1602]: Failure to communicate with kernel device-mapper driver.
[ 16.390318] lvm2[1602]: Check that device-mapper is available in the kernel.
[ 16.438999] lvm2[1602]: No volume groups found
[ 16.439630] lvm2[1602]: .
[ 19.112288] udevd[1593]: specified group 'nvram' unknown
[ 19.112417] udevd[1593]: specified user 'tss' unknown
[ 19.112531] udevd[1593]: specified group 'tss' unknown
[ 19.112664] udevd[1593]: specified group 'rdma' unknown
[ 21.141873] ACPI: AC Adapter [ACAD] (on-line)
[ 21.158319] udevd[1724]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 21.158533] udevd[1723]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 21.159834] udevd[1725]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 21.161292] udevd[1726]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 21.161650] udevd[1727]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 21.237144] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 21.326076] udevd[1769]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 21.410473] udevd[1783]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 21.430370] udevd[1657]: kernel-provided name 'sr0' and NAME= 'scd0' disagree, please use SYMLINK+= or change the kernel to provide the proper name
[ 21.440429] cfg80211: Calling CRDA to update world regulatory domain
[ 21.776583] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 21.829655] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 21.862184] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 22.028600] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.028648] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 22.383498] udevd[1887]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 22.453984] ath5k 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 22.454421] ath5k 0000:05:00.0: setting latency timer to 64
[ 22.454480] ath5k 0000:05:00.0: registered as 'phy0'
[ 22.928090] modprobe[1846]: FATAL: Error running install command for snd_hda_codec_realtek
[ 22.969195] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 22.985159] modprobe[1838]: FATAL: Error running install command for snd_hda_intel
[ 23.061958] ath: EEPROM regdomain: 0x65
[ 23.061963] ath: EEPROM indicates we should expect a direct regpair map
[ 23.061968] ath: Country alpha2 being used: 00
[ 23.061970] ath: Regpair used: 0x65
[ 23.062505] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 23.063421] Registered led device: ath5k-phy0::rx
[ 23.063477] Registered led device: ath5k-phy0::tx
[ 23.063494] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 23.084635] udevd[1949]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 23.505964] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 23.506889] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 23.507476] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 23.509177] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 23.665541] intel_rng: FWH not detected
[ 23.668866] iTCO_vendor_support: vendor-support=0
[ 23.669584] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 23.669685] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 23.670899] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 27.258037] laptop-mode[2114]: Laptop mode
[ 27.259466] laptop-mode[2115]: disabled, not active
[ 28.560385] Adding 971896k swap on /dev/sda5. Priority:0 extents:1 across:971896k
[ 28.917609] laptop-mode[2158]: Laptop mode
[ 28.919187] laptop-mode[2159]: disabled, not active
[ 35.295108] EXT3-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
[ 35.295163] kjournald starting. Commit interval 5 seconds
[ 35.295394] EXT3-fs (sda4): using internal journal
[ 35.295401] zcache: created ephemeral tmem pool, id=2, client=65535
[ 35.295406] EXT3-fs (sda4): mounted filesystem with writeback data mode
[ 35.329687] pcmciautils[2182]: No PCMCIA bridge module specified ... failed!
[ 35.335934] console-screen.sh[2183]: Setting console screen modes and fonts.
[ 35.346214] console-screen.sh[2183]: setterm: $TERM is not defined.
[ 35.405190] ifupdown[2218]: Setting up networking....
[ 35.536179] networking[2220]: Configuring network interfaces...done.
[ 35.831802] timidity[2258]: Timidity is not yet configured.
[ 35.831813] timidity[2258]: Enable Alsa Sequencer first by editing /etc/default/timidity.
[ 35.835231] acct[2256]: Starting process accounting: Turning on process accounting, file set to '/var/log/kernel_pacct'.
[ 35.840618] stop-plymouth[2278]: Splash control client
[ 35.840630] stop-plymouth[2278]: USAGE: plymouth [OPTION...] [COMMAND [OPTION...]...]
[ 35.840637] stop-plymouth[2278]: Options:
[ 35.840644] stop-plymouth[2278]: --help This help message
[ 35.840651] stop-plymouth[2278]: --debug Enable verbose debug logging
[ 35.840658] stop-plymouth[2278]: --get-splash-plugin-path Get directory where splash plugins are installed
[ 35.840665] stop-plymouth[2278]: --newroot= Tell boot daemon that new root filesystem is mounted
[ 35.840672] stop-plymouth[2278]: --quit Tell boot daemon to quit
[ 35.840679] stop-plymouth[2278]: --ping Check of boot daemon is running
[ 35.840687] stop-plymouth[2278]: --has-active-vt Check if boot daemon has an active vt
[ 35.840694] stop-plymouth[2278]: --sysinit Tell boot daemon root filesystem is mounted read-write
[ 35.840806] stop-plymouth[2278]: --show-splash Show splash screen
[ 35.840813] stop-plymouth[2278]: --hide-splash Hide splash screen
[ 35.840820] stop-plymouth[2278]: --ask-for-password Ask user for password
[ 35.840827] stop-plymouth[2278]: --ignore-keystroke= Remove sensitivity to a keystroke
[ 35.840834] stop-plymouth[2278]: --update= Tell boot daemon an update about boot progress
[ 35.840842] stop-plymouth[2278]: --details Tell boot daemon there were errors during boot
[ 35.840849] stop-plymouth[2278]: --wait Wait for boot daemon to quit
[ 35.840855] stop-plymouth[2278]: Available commands:
[ 35.840862] stop-plymouth[2278]: update Tell daemon about boot status changes
[ 35.840869] stop-plymouth[2278]: update-root-fs Tell daemon about root filesystem changes
[ 35.840876] stop-plymouth[2278]: show-splash Tell daemon to show splash screen
[ 35.840972] stop-plymouth[2278]: hide-splash Tell daemon to hide splash screen
[ 35.840980] stop-plymouth[2278]: ask-for-password Ask user for password
[ 35.840987] stop-plymouth[2278]: ask-question Ask user a question
[ 35.840993] stop-plymouth[2278]: display-message Display a message
[ 35.843139] stop-plymouth[2278]: hide-message Hide a message
[ 35.843163] stop-plymouth[2278]: watch-keystroke Become sensitive to a keystroke
[ 35.843171] stop-plymouth[2278]: ignore-keystroke Remove sensitivity to a keystroke
[ 35.843179] stop-plymouth[2278]: pause-progress Pause boot progress bar
[ 35.843186] stop-plymouth[2278]: unpause-progress Unpause boot progress bar
[ 35.843193] stop-plymouth[2278]: report-error Tell boot daemon there were errors during boot
[ 35.843200] stop-plymouth[2278]: deactivate Tell boot daemon to deactivate
[ 35.843366] stop-plymouth[2278]: reactivate Tell boot daemon to reactivate
[ 35.843374] stop-plymouth[2278]: quit Tell boot daemon to quit
[ 35.843381] stop-plymouth[2278]: Options for update command:
[ 35.843388] stop-plymouth[2278]: --status= Tell daemon the current boot status
[ 35.843394] stop-plymouth[2278]: Options for update-root-fs command:
[ 35.843401] stop-plymouth[2278]: --new-root-dir= Root filesystem is about to change
[ 35.843408] stop-plymouth[2278]: --read-write Root filesystem is no longer read-only
[ 35.843415] stop-plymouth[2278]: Options for ask-for-password command:
[ 35.843422] stop-plymouth[2278]: --command= Command to send password to via standard input
[ 35.843429] stop-plymouth[2278]: --prompt= Message to display when asking for password
[ 35.843437] stop-plymouth[2278]: --number-of-tries= Number of times to ask before giving up (requires --command)
[ 35.843537] stop-plymouth[2278]: --dont-pause-progress Don't pause boot progress bar while asking
[ 35.843545] stop-plymouth[2278]: Options for ask-question command:
[ 35.843552] stop-plymouth[2278]: --command= Command to send the answer to via standard input
[ 35.843559] stop-plymouth[2278]: --prompt= Message to display when asking the question
[ 35.843566] stop-plymouth[2278]: --dont-pause-progress Don't pause boot progress bar while asking
[ 35.843573] stop-plymouth[2278]: Options for display-message command:
[ 35.843580] stop-plymouth[2278]: --text= The message text
[ 35.843586] stop-plymouth[2278]: Options for hide-message command:
[ 35.843593] stop-plymouth[2278]: --text= The message text
[ 35.843599] stop-plymouth[2278]: Options for watch-keystroke command:
[ 35.843606] stop-plymouth[2278]: --command= Command to send keystroke to via standard input
[ 35.843656] stop-plymouth[2278]: --keys= Keys to become sensitive to
[ 35.843664] stop-plymouth[2278]: Options for ignore-keystroke command:
[ 35.843670] stop-plymouth[2278]: --keys= Keys to remove sensitivity to
[ 35.843677] stop-plymouth[2278]: Options for quit command:
[ 35.843683] stop-plymouth[2278]: --retain-splash Don't explicitly hide boot splash on exit
[ 35.866422] pulseaudio[2271]: PulseAudio configured for per-user sessions ... (warning).
[ 35.867875] /usr/sbin/cron[2307]: (CRON) INFO (pidfile fd = 3)
[ 35.874086] udevd[1644]: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree, please use SYMLINK+= or change the kernel to provide the proper name
[ 35.885745] avahi-daemon[2274]: Found user 'avahi' (UID 106) and group 'avahi' (GID 109).
[ 35.885758] avahi-daemon[2274]: Successfully dropped root privileges.
[ 35.885765] avahi-daemon[2274]: avahi-daemon 0.6.30 starting up.
[ 35.887560] minissdpd[2317]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
[ 35.889632] /usr/sbin/cron[2319]: (CRON) STARTUP (fork ok)
[ 35.889982] /usr/sbin/cron[2319]: (CRON) INFO (Running @reboot jobs)
[ 35.890884] minissdpd[2317]: Failed to add IPv4 multicast membership for interface 0.0.0.0.
[ 35.927063] minissdpd[2259]: Starting UPnP devices daemon: MiniSSDPd.
[ 35.927073] cron[1577]: Starting periodic command scheduler: crond.
[ 35.927080] acpi-support[2266]: Checking battery state...done.
[ 35.927087] acct[2256]: acct.
[ 35.968447] anacron[2260]: Starting anac(h)ronistic cron: anacron.
[ 35.968835] anacron[2344]: Anacron 2.3 started on 2012-01-07
[ 35.973333] anacron[2344]: Will run job `cron.daily' in 5 min.
[ 35.973370] anacron[2344]: Jobs will be executed sequentially
[ 35.989049] irqbalance[2254]: Starting SMP IRQ Balancer: irqbalance.
[ 35.997056] Disabling lock debugging due to kernel taint
[ 36.011546] vboxdrv: Found 2 processor cores.
[ 36.012366] lpd[2374]: restarted
[ 36.012377] lpd[2264]: Starting printer spooler: lpd.
[ 36.012806] vboxdrv: fAsync=0 offMin=0x4b4 offMax=0x1308
[ 36.012886] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 36.012888] vboxdrv: Successfully loaded version 4.1.6_Debian (interface 0x00190000).
[ 36.025388] laptop-mode[2389]: enabled, not active
[ 36.046784] vboxpci: pci-stub module not available, cannot detach PCI devices
[ 36.046788] vboxpci: IOMMU not found (not registered)
[ 36.047783] virtualbox[2265]: Starting VirtualBox kernel modules.
[ 36.051146] acpid[2276]: Loading ACPI kernel modules....
[ 36.070814] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 36.101581] acpid[2461]: starting up with netlink and the input layer
[ 36.101592] acpid[2276]: Starting ACPI services....
[ 36.101598] acpid[2461]: 45 rules loaded
[ 36.101604] acpid[2461]: waiting for events: event logging is off
[ 36.101813] dbus-daemon[2453]: Unknown username "nm-openconnect" in message bus configuration file
[ 36.110992] systemd-logind[2283]: New seat seat0.
[ 36.113773] avahi-daemon[2274]: Successfully called chroot().
[ 36.113784] avahi-daemon[2274]: Successfully dropped remaining capabilities.
[ 36.114058] avahi-daemon[2274]: Loading service file /services/udisks.service.
[ 36.114570] avahi-daemon[2274]: Network interface enumeration completed.
[ 36.114728] avahi-daemon[2274]: Registering HINFO record with values 'I686'/'LINUX'.
[ 36.115025] avahi-daemon[2274]: Server startup complete. Host name is deneb.local. Local service cookie is 257273166.
[ 36.115183] avahi-daemon[2274]: Service "deneb" (/services/udisks.service) successfully established.
[ 36.132805] binfmt-support[2277]: Enabling additional executable binary formats: binfmt-support.
[ 36.142860] dhcdbd[2473]: Starting DHCP D-Bus daemon: dhcdbd.
[ 36.146715] dhcdbd[2481]: Started up.
[ 36.158342] saned[2482]: saned disabled; edit /etc/default/saned
[ 36.637890] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.649507] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.857988] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 36.858539] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 36.858828] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 36.859179] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 36.859240] ehci_hcd 0000:00:1d.7: PME# enabled
[ 36.939579] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 37.027975] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 37.027985] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 37.032070] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd0644000-0xd06443ff] (PCI address [0xd0644000-0xd06443ff])
[ 37.032087] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 37.032113] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 37.032143] ehci_hcd 0000:00:1d.7: PME# disabled
[ 37.032152] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 37.032160] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 37.063193] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 37.063384] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 37.063393] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 37.076180] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 37.076197] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 37.095201] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 37.095498] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 37.095513] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 37.127249] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 37.127536] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 37.127552] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 37.162088] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 37.162105] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 37.194216] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 37.194489] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 37.194504] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 38.887722] wlan0: authenticate with 84:c9:b2:82:80:43 (try 1)
[ 38.889239] wlan0: authenticated
[ 38.895943] wlan0: associate with 84:c9:b2:82:80:43 (try 1)
[ 38.898047] wlan0: RX AssocResp from 84:c9:b2:82:80:43 (capab=0x411 status=0 aid=1)
[ 38.898051] wlan0: associated
[ 38.898522] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.170067] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 50.546035] wlan0: no IPv6 routers present