dmesg - test2

Return To test2 System Information

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-15-generic (buildd@rothera) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #24-Ubuntu SMP Mon Dec 12 15:25:25 UTC 2011 (Ubuntu 3.0.0-15.24-generic 3.0.13)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
[    0.000000]  BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000022f000000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-D3/GA-970A-D3, BIOS F8d 11/25/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xcfda0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000022f000000 aka 8944M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] total RAM covered: 3326M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[    0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] found SMP MP-table at [c00f4c10] f4c10
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 365e6000 - 372eb000
[    0.000000] ACPI: RSDP 000f6b30 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT cfdd1000 00048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP cfdd1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT cfdd1100 07876 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS cfda0000 00040
[    0.000000] ACPI: MSDM cfdd8a40 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET cfdd8ac0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG cfdd8b00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS cfdd8b80 00034 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG cfdd8bf0 00182 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC cfdd8980 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: MATS cfdd8d80 06181 (v01        MATS RCM 80000001 INTL 20061109)
[    0.000000] ACPI: SSDT cfddef80 01714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2437MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cfda0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cfda0
[    0.000000] On node 0 totalpages: 851247
[    0.000000] free_area_init_node: node 0, pgdat c17b5400, node_mem_map f4be6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4876 pages used for memmap
[    0.000000]   HighMem zone: 619158 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f4400000 s26240 r0 d22912 u524288
[    0.000000] pcpu-alloc: s26240 r0 d22912 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 844595
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 13621504 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000cfda0)
[    0.000000] Memory: 3340916k/3405440k available (5336k kernel code, 64072k reserved, 2599k data, 696k init, 2496136k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc17c1000 - 0xc186f000   ( 696 kB)
[    0.000000]       .data : 0xc15362c4 - 0xc17c0080   (2599 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15362c4   (5336 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f300a000 soft=f300c000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3825.513 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7651.02 BogoMIPS (lpj=15302052)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004024] Security Framework initialized
[    0.004033] AppArmor: AppArmor initialized
[    0.004034] Yama: becoming mindful.
[    0.004070] Mount-cache hash table entries: 512
[    0.004158] Initializing cgroup subsys cpuacct
[    0.004163] Initializing cgroup subsys memory
[    0.004168] Initializing cgroup subsys devices
[    0.004170] Initializing cgroup subsys freezer
[    0.004171] Initializing cgroup subsys net_cls
[    0.004173] Initializing cgroup subsys blkio
[    0.004177] Initializing cgroup subsys perf_event
[    0.004197] CPU: Physical Processor ID: 0
[    0.004198] CPU: Processor Core ID: 0
[    0.004200] mce: CPU supports 7 MCE banks
[    0.005585] ACPI: Core revision 20110413
[    0.012017] ftrace: allocating 24883 entries in 49 pages
[    0.020045] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020336] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063125] CPU0: AMD FX(tm)-8120 Eight-Core Processor            stepping 02
[    0.064003] Performance Events: AMD Family 15h PMU driver.
[    0.064003] ... version:                0
[    0.064003] ... bit width:              48
[    0.064003] ... generic registers:      6
[    0.064003] ... value mask:             0000ffffffffffff
[    0.064003] ... max period:             00007fffffffffff
[    0.064003] ... fixed-purpose events:   0
[    0.064003] ... event mask:             000000000000003f
[    0.064003] CPU 1 irqstacks, hard=f30c0000 soft=f30c2000
[    0.064003] Booting Node   0, Processors  #1
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.152079] CPU 2 irqstacks, hard=f30ea000 soft=f30ec000
[    0.152081]  #2
[    0.152082] smpboot cpu 2: start_ip = 9b000
[    0.008000] Initializing CPU#2
[    0.244066] CPU 3 irqstacks, hard=f30f6000 soft=f30f8000
[    0.244068]  #3
[    0.244069] smpboot cpu 3: start_ip = 9b000
[    0.008000] Initializing CPU#3
[    0.336070] CPU 4 irqstacks, hard=f310a000 soft=f310c000
[    0.336072]  #4
[    0.336073] smpboot cpu 4: start_ip = 9b000
[    0.008000] Initializing CPU#4
[    0.428078] CPU 5 irqstacks, hard=f312a000 soft=f312c000
[    0.428079]  #5
[    0.428080] smpboot cpu 5: start_ip = 9b000
[    0.008000] Initializing CPU#5
[    0.520088] CPU 6 irqstacks, hard=f3156000 soft=f3160000
[    0.520089]  #6
[    0.520090] smpboot cpu 6: start_ip = 9b000
[    0.008000] Initializing CPU#6
[    0.612085] CPU 7 irqstacks, hard=f316a000 soft=f316c000
[    0.612087]  #7 Ok.
[    0.612088] smpboot cpu 7: start_ip = 9b000
[    0.008000] Initializing CPU#7
[    0.704048] Brought up 8 CPUs
[    0.704050] Total of 8 processors activated (61242.32 BogoMIPS).
[    0.708158] devtmpfs: initialized
[    0.708169] PM: Registering ACPI NVS region at cfda0000 (200704 bytes)
[    0.712932] print_constraints: dummy: 
[    0.712949] Time: 19:18:54  Date: 12/28/11
[    0.712975] NET: Registered protocol family 16
[    0.712982] Trying to unpack rootfs image as initramfs...
[    0.713073] EISA bus registered
[    0.713082] Extended Config Space enabled on 1 nodes
[    0.713113] ACPI: bus type pci registered
[    0.713161] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.713164] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.713166] PCI: Using MMCONFIG for extended config space
[    0.713167] PCI: Using configuration type 1 for base access
[    0.713959] bio: create slab  at 0
[    0.713959] ACPI: EC: Look up EC in DSDT
[    0.722610] ACPI Warning: Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20110413/tbutils-314)
[    0.722762] ACPI: Interpreter enabled
[    0.722768] ACPI: (supports S0 S3 S4 S5)
[    0.722785] ACPI: Using IOAPIC for interrupt routing
[    0.874624] ACPI: No dock devices found.
[    0.874627] HEST: Table not found.
[    0.874631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.874685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.874793] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.874795] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.874798] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.874800] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.874802] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.874805] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[    0.874823] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[    0.874838] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.874888] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[    0.874918] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.874921] pci 0000:00:02.0: PME# disabled
[    0.874936] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[    0.874962] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.874965] pci 0000:00:04.0: PME# disabled
[    0.874982] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[    0.875008] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.875011] pci 0000:00:09.0: PME# disabled
[    0.875024] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[    0.875057] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.875059] pci 0000:00:0a.0: PME# disabled
[    0.875084] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[    0.875102] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
[    0.875110] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
[    0.875118] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
[    0.875128] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
[    0.875136] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
[    0.875144] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[    0.875161] pci 0000:00:11.0: set SATA to AHCI mode
[    0.875190] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.875201] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[    0.875259] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.875275] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[    0.875336] pci 0000:00:12.2: supports D1 D2
[    0.875338] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.875342] pci 0000:00:12.2: PME# disabled
[    0.875361] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.875373] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[    0.875430] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.875446] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[    0.875500] pci 0000:00:13.2: supports D1 D2
[    0.875502] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.875506] pci 0000:00:13.2: PME# disabled
[    0.875523] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.875585] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.875598] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.875608] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.875616] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.875624] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.875633] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
[    0.875666] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.875686] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.875732] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.875735] pci 0000:00:14.2: PME# disabled
[    0.875746] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.875805] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.875842] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.875855] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[    0.875912] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[    0.875959] pci 0000:00:15.0: supports D1 D2
[    0.875978] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.875989] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[    0.876044] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.876070] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[    0.876127] pci 0000:00:16.2: supports D1 D2
[    0.876129] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.876135] pci 0000:00:16.2: PME# disabled
[    0.876153] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[    0.876172] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[    0.876187] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[    0.876204] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[    0.876228] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[    0.876246] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[    0.876303] pci 0000:01:00.0: [1002:6739] type 0 class 0x000300
[    0.876318] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.876330] pci 0000:01:00.0: reg 18: [mem 0xfd5c0000-0xfd5dffff 64bit]
[    0.876338] pci 0000:01:00.0: reg 20: [io  0xce00-0xceff]
[    0.876352] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.876372] pci 0000:01:00.0: supports D1 D2
[    0.876394] pci 0000:01:00.1: [1002:aa88] type 0 class 0x000403
[    0.876409] pci 0000:01:00.1: reg 10: [mem 0xfd5fc000-0xfd5fffff 64bit]
[    0.876458] pci 0000:01:00.1: supports D1 D2
[    0.884067] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.884072] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    0.884075] pci 0000:00:02.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.884079] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.884124] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.884143] pci 0000:02:00.0: reg 10: [mem 0xfd4f8000-0xfd4fffff 64bit]
[    0.884198] pci 0000:02:00.0: supports D1 D2
[    0.884200] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884204] pci 0000:02:00.0: PME# disabled
[    0.892066] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.892071] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.892074] pci 0000:00:04.0:   bridge window [mem 0xfd400000-0xfd4fffff]
[    0.892078] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.892121] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.892134] pci 0000:03:00.0: reg 10: [io  0xee00-0xeeff]
[    0.892155] pci 0000:03:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
[    0.892168] pci 0000:03:00.0: reg 20: [mem 0xfdcf8000-0xfdcfbfff 64bit pref]
[    0.892209] pci 0000:03:00.0: supports D1 D2
[    0.892211] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.892215] pci 0000:03:00.0: PME# disabled
[    0.900067] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[    0.900072] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.900075] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.900079] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.900121] pci 0000:04:00.0: [197b:2363] type 0 class 0x000106
[    0.900192] pci 0000:04:00.0: reg 24: [mem 0xfdbff000-0xfdbff1ff]
[    0.900203] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.900231] pci 0000:04:00.0: PME# supported from D3hot
[    0.900236] pci 0000:04:00.0: PME# disabled
[    0.900264] pci 0000:04:00.1: [197b:0368] type 0 class 0x000101
[    0.900284] pci 0000:04:00.1: reg 10: [io  0xdf00-0xdf07]
[    0.900298] pci 0000:04:00.1: reg 14: [io  0xde00-0xde03]
[    0.900311] pci 0000:04:00.1: reg 18: [io  0xdd00-0xdd07]
[    0.900324] pci 0000:04:00.1: reg 1c: [io  0xdc00-0xdc03]
[    0.900335] pci 0000:04:00.1: reg 20: [io  0xdb00-0xdb0f]
[    0.908069] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    0.908073] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.908076] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.908080] pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.908137] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[    0.908141] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.908145] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.908149] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
[    0.908152] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.908154] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.908156] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.908159] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.908161] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.908164] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    0.908216] pci 0000:00:15.0: PCI bridge to [bus 06-06]
[    0.908221] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    0.908225] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    0.908230] pci 0000:00:15.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    0.908246] pci_bus 0000:00: on NUMA node 0
[    0.908250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.908581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.908623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.908672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.908705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[    0.908753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[    0.908786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.908821]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.908824]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.908825] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.921404] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    0.921450] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    0.921484] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    0.921518] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    0.921560] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    0.921593] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    0.921626] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    0.921660] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    0.921743] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.921747] vgaarb: loaded
[    0.921748] vgaarb: bridge control possible 0000:01:00.0
[    0.921933] SCSI subsystem initialized
[    0.921965] libata version 3.00 loaded.
[    0.921965] usbcore: registered new interface driver usbfs
[    0.921965] usbcore: registered new interface driver hub
[    0.921965] usbcore: registered new device driver usb
[    0.921965] PCI: Using ACPI for IRQ routing
[    0.928828] PCI: pci_cache_line_size set to 64 bytes
[    0.928838] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.928924] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.928926] reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff 
[    0.929010] NetLabel: Initializing
[    0.929012] NetLabel:  domain hash size = 128
[    0.929014] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.929023] NetLabel:  unlabeled traffic allowed by default
[    0.929058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.929066] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.931109] Switching to clocksource hpet
[    0.931245] Switched to NOHz mode on CPU #0
[    0.931125] Switched to NOHz mode on CPU #5
[    0.931195] Switched to NOHz mode on CPU #1
[    0.931119] Switched to NOHz mode on CPU #3
[    0.931125] Switched to NOHz mode on CPU #6
[    0.931119] Switched to NOHz mode on CPU #4
[    0.931114] Switched to NOHz mode on CPU #2
[    0.931130] Switched to NOHz mode on CPU #7
[    0.934316] AppArmor: AppArmor Filesystem Enabled
[    0.934332] pnp: PnP ACPI init
[    0.934344] ACPI: bus type pnp registered
[    0.934425] pnp 00:00: [bus 00-ff]
[    0.934428] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.934431] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.934433] pnp 00:00: [io  0x0d00-0xffff window]
[    0.934435] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.934437] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.934440] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.934442] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[    0.934484] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.934494] pnp 00:01: [io  0x0010-0x001f]
[    0.934496] pnp 00:01: [io  0x0022-0x003f]
[    0.934498] pnp 00:01: [io  0x0044-0x004d]
[    0.934499] pnp 00:01: [io  0x0050-0x005f]
[    0.934501] pnp 00:01: [io  0x0062-0x0063]
[    0.934503] pnp 00:01: [io  0x0065-0x006f]
[    0.934505] pnp 00:01: [io  0x0074-0x007f]
[    0.934506] pnp 00:01: [io  0x0091-0x0093]
[    0.934508] pnp 00:01: [io  0x00a2-0x00bf]
[    0.934510] pnp 00:01: [io  0x00e0-0x00ef]
[    0.934512] pnp 00:01: [io  0x04d0-0x04d1]
[    0.934514] pnp 00:01: [io  0x0220-0x0225]
[    0.934515] pnp 00:01: [io  0x0290-0x0294]
[    0.934571] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.934574] system 00:01: [io  0x0220-0x0225] has been reserved
[    0.934576] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.934579] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.943371] Freeing initrd memory: 13332k freed
[    1.004258] pnp 00:02: [io  0x0900-0x091f]
[    1.004261] pnp 00:02: [io  0x0228-0x022f]
[    1.004263] pnp 00:02: [io  0x040b]
[    1.004264] pnp 00:02: [io  0x04d6]
[    1.004266] pnp 00:02: [io  0x0c00-0x0c01]
[    1.004267] pnp 00:02: [io  0x0c14]
[    1.004269] pnp 00:02: [io  0x0c50-0x0c52]
[    1.004270] pnp 00:02: [io  0x0c6c-0x0c6d]
[    1.004271] pnp 00:02: [io  0x0c6f]
[    1.004273] pnp 00:02: [io  0x0cd0-0x0cd1]
[    1.004274] pnp 00:02: [io  0x0cd2-0x0cd3]
[    1.004276] pnp 00:02: [io  0x0cd4-0x0cdf]
[    1.004277] pnp 00:02: [io  0x0800-0x08fe]
[    1.004278] pnp 00:02: [io  0x0a10-0x0a17]
[    1.004280] pnp 00:02: [io  0x0b00-0x0b0f]
[    1.004281] pnp 00:02: [io  0x0b10-0x0b1f]
[    1.004282] pnp 00:02: [io  0x0b20-0x0b3f]
[    1.004284] pnp 00:02: [mem 0x00000000-0x00000fff window]
[    1.004286] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[    1.004293] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.004324] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    1.004332] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    1.004376] system 00:02: [io  0x0900-0x091f] has been reserved
[    1.004379] system 00:02: [io  0x0228-0x022f] has been reserved
[    1.004381] system 00:02: [io  0x040b] has been reserved
[    1.004383] system 00:02: [io  0x04d6] has been reserved
[    1.004385] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    1.004386] system 00:02: [io  0x0c14] has been reserved
[    1.004388] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    1.004390] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
[    1.004392] system 00:02: [io  0x0c6f] has been reserved
[    1.004394] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    1.004396] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    1.004397] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
[    1.004399] system 00:02: [io  0x0800-0x08fe] has been reserved
[    1.004401] system 00:02: [io  0x0a10-0x0a17] has been reserved
[    1.004403] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    1.004405] system 00:02: [io  0x0b10-0x0b1f] has been reserved
[    1.004407] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    1.004409] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[    1.004412] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.004489] pnp 00:03: [dma 4]
[    1.004491] pnp 00:03: [io  0x0000-0x000f]
[    1.004493] pnp 00:03: [io  0x0080-0x0090]
[    1.004494] pnp 00:03: [io  0x0094-0x009f]
[    1.004496] pnp 00:03: [io  0x00c0-0x00df]
[    1.004521] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.004559] pnp 00:04: [irq 0 disabled]
[    1.004566] pnp 00:04: [irq 8]
[    1.004568] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    1.004593] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.004614] pnp 00:05: [io  0x0070-0x0073]
[    1.004639] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.004646] pnp 00:06: [io  0x0061]
[    1.004673] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.004679] pnp 00:07: [io  0x00f0-0x00ff]
[    1.004683] pnp 00:07: [irq 13]
[    1.004708] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.004923] pnp 00:08: [io  0x03f8-0x03ff]
[    1.004926] pnp 00:08: [irq 4]
[    1.004976] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.005001] pnp 00:09: [io  0x0060]
[    1.005003] pnp 00:09: [io  0x0064]
[    1.005006] pnp 00:09: [irq 1]
[    1.005041] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.005063] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    1.005113] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    1.005116] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.005219] pnp 00:0b: [mem 0x000d3000-0x000d3fff]
[    1.005221] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[    1.005223] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[    1.005224] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[    1.005226] pnp 00:0b: [mem 0xcfda0000-0xcfdfffff]
[    1.005227] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[    1.005229] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    1.005230] pnp 00:0b: [mem 0x00100000-0xcfd9ffff]
[    1.005232] pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
[    1.005233] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[    1.005235] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    1.005236] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    1.005238] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[    1.005241] pnp 00:0b: disabling [mem 0x000d3000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005244] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005247] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005249] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005252] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005255] pnp 00:0b: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    1.005317] system 00:0b: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[    1.005319] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    1.005321] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
[    1.005323] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[    1.005325] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.005327] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[    1.005329] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[    1.005332] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.005347] pnp: PnP ACPI: found 12 devices
[    1.005348] ACPI: ACPI bus type pnp unregistered
[    1.005351] PnPBIOS: Disabled by ACPI PNP
[    1.041066] PCI: max bus depth: 1 pci_try_num: 2
[    1.041090] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd500000-0xfd51ffff pref]
[    1.041093] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    1.041095] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    1.041098] pci 0000:00:02.0:   bridge window [mem 0xfd500000-0xfd5fffff]
[    1.041101] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.041104] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    1.041107] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    1.041110] pci 0000:00:04.0:   bridge window [mem 0xfd400000-0xfd4fffff]
[    1.041112] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    1.041116] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[    1.041118] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    1.041121] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    1.041124] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    1.041128] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd800000-0xfd80ffff pref]
[    1.041130] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[    1.041132] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    1.041135] pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    1.041138] pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    1.041141] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[    1.041144] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    1.041148] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
[    1.041151] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
[    1.041156] pci 0000:00:15.0: PCI bridge to [bus 06-06]
[    1.041159] pci 0000:00:15.0:   bridge window [io  0x9000-0x9fff]
[    1.041163] pci 0000:00:15.0:   bridge window [mem 0xfd700000-0xfd7fffff]
[    1.041166] pci 0000:00:15.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[    1.041179] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.041183] pci 0000:00:02.0: setting latency timer to 64
[    1.041190] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.041193] pci 0000:00:04.0: setting latency timer to 64
[    1.041199] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.041202] pci 0000:00:09.0: setting latency timer to 64
[    1.041205] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.041208] pci 0000:00:0a.0: setting latency timer to 64
[    1.041216] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.041219] pci 0000:00:15.0: setting latency timer to 64
[    1.041222] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.041224] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.041226] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.041228] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    1.041230] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.041232] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
[    1.041234] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    1.041235] pci_bus 0000:01: resource 1 [mem 0xfd500000-0xfd5fffff]
[    1.041237] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.041239] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    1.041241] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff]
[    1.041243] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    1.041245] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    1.041246] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[    1.041248] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    1.041250] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    1.041252] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    1.041253] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[    1.041255] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    1.041257] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[    1.041259] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref]
[    1.041261] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    1.041262] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    1.041264] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    1.041266] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    1.041268] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.041270] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xfebfffff]
[    1.041272] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
[    1.041274] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[    1.041276] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[    1.041305] NET: Registered protocol family 2
[    1.041354] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.041517] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.041719] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.041820] TCP: Hash tables configured (established 131072 bind 65536)
[    1.041822] TCP reno registered
[    1.041824] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.041830] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.041893] NET: Registered protocol family 1
[    1.108082] pci 0000:01:00.0: Boot video device
[    1.108106] PCI: CLS 64 bytes, default 64
[    1.108766] audit: initializing netlink socket (disabled)
[    1.108774] type=2000 audit(1325099934.104:1): initialized
[    1.127577] highmem bounce pool size: 64 pages
[    1.127581] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.136211] VFS: Disk quotas dquot_6.5.2
[    1.136268] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.136846] fuse init (API version 7.16)
[    1.136918] msgmni has been set to 1676
[    1.137324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.137355] io scheduler noop registered
[    1.137356] io scheduler deadline registered
[    1.137370] io scheduler cfq registered (default)
[    1.137590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.137609] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.137710] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.137715] ACPI: Power Button [PWRB]
[    1.137752] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.137755] ACPI: Power Button [PWRF]
[    1.137776] ACPI: acpi_idle registered with cpuidle
[    1.316681] ERST: Table is not found!
[    1.316713] isapnp: Scanning for PnP cards...
[    1.337112] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.670247] isapnp: No Plug & Play device found
[    1.696960] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.697167] Linux agpgart interface v0.103
[    1.698328] brd: module loaded
[    1.698772] loop: module loaded
[    1.698891] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.698924] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[    1.698935] pata_acpi 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.698951] pata_acpi 0000:04:00.1: setting latency timer to 64
[    1.698959] pata_acpi 0000:04:00.1: PCI INT B disabled
[    1.699216] Fixed MDIO Bus: probed
[    1.699235] PPP generic driver version 2.4.2
[    1.699262] tun: Universal TUN/TAP device driver, 1.6
[    1.699263] tun: (C) 1999-2004 Max Krasnyansky 
[    1.699324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.699333] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.699341] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.699366] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.699372] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.699390] QUIRK: Enable AMD PLL fix
[    1.699399] ehci_hcd 0000:00:12.2: debug port 1
[    1.699415] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[    1.708044] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.708150] hub 1-0:1.0: USB hub found
[    1.708153] hub 1-0:1.0: 5 ports detected
[    1.708212] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.708220] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.708245] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.708250] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.708265] ehci_hcd 0000:00:13.2: debug port 1
[    1.708274] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[    1.720044] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.720126] hub 2-0:1.0: USB hub found
[    1.720129] hub 2-0:1.0: 5 ports detected
[    1.720186] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.720194] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.720218] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.720224] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.720238] ehci_hcd 0000:00:16.2: debug port 1
[    1.720248] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[    1.732038] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.732122] hub 3-0:1.0: USB hub found
[    1.732125] hub 3-0:1.0: 4 ports detected
[    1.732184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.732193] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.732201] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.732226] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.732244] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[    1.792095] hub 4-0:1.0: USB hub found
[    1.792100] hub 4-0:1.0: 5 ports detected
[    1.792159] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.792167] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.792195] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.792206] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[    1.852112] hub 5-0:1.0: USB hub found
[    1.852117] hub 5-0:1.0: 5 ports detected
[    1.852175] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.852184] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.852210] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.852222] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[    1.912105] hub 6-0:1.0: USB hub found
[    1.912110] hub 6-0:1.0: 2 ports detected
[    1.912165] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.912173] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.912199] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.912212] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[    1.972100] hub 7-0:1.0: USB hub found
[    1.972105] hub 7-0:1.0: 4 ports detected
[    1.972166] uhci_hcd: USB Universal Host Controller Interface driver
[    1.972219] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.972221] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.972344] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.972412] mousedev: PS/2 mouse device common for all mice
[    1.972497] rtc_cmos 00:05: RTC can wake from S4
[    1.972562] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.972579] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.972650] device-mapper: uevent: version 1.0.3
[    1.972710] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    1.972735] EISA: Probing bus 0 at eisa.0
[    1.972736] EISA: Cannot allocate resource for mainboard
[    1.972738] Cannot allocate resource for EISA slot 1
[    1.972739] Cannot allocate resource for EISA slot 2
[    1.972741] Cannot allocate resource for EISA slot 3
[    1.972742] Cannot allocate resource for EISA slot 4
[    1.972743] Cannot allocate resource for EISA slot 5
[    1.972745] Cannot allocate resource for EISA slot 6
[    1.972746] Cannot allocate resource for EISA slot 7
[    1.972748] Cannot allocate resource for EISA slot 8
[    1.972749] EISA: Detected 0 cards.
[    1.972756] cpufreq-nforce2: No nForce2 chipset.
[    1.972883] cpuidle: using governor ladder
[    1.973110] cpuidle: using governor menu
[    1.973112] EFI Variables Facility v0.08 2004-May-17
[    1.973336] TCP cubic registered
[    1.973446] NET: Registered protocol family 10
[    1.973912] NET: Registered protocol family 17
[    1.973923] Registering the dns_resolver key type
[    1.973934] Using IPI No-Shortcut mode
[    1.973992] PM: Hibernation image not present or could not be loaded.
[    1.973999] registered taskstats version 1
[    1.984482]   Magic number: 7:429:345
[    1.984502] tty tty62: hash matches
[    1.984616] rtc_cmos 00:05: setting system clock to 2011-12-28 19:18:55 UTC (1325099935)
[    1.984668] powernow-k8: Found 1 AMD FX(tm)-8120 Eight-Core Processor            (8 cpu cores) (version 2.20.00)
[    1.984703] powernow-k8: Core Performance Boosting: on.
[    1.984748] powernow-k8:    0 : pstate 0 (3800 MHz)
[    1.984750] powernow-k8:    1 : pstate 1 (2800 MHz)
[    1.984751] powernow-k8:    2 : pstate 2 (2300 MHz)
[    1.984752] powernow-k8:    3 : pstate 3 (1900 MHz)
[    1.984754] powernow-k8:    4 : pstate 4 (1400 MHz)
[    1.985461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.985464] EDD information not available.
[    1.985636] Freeing unused kernel memory: 696k freed
[    1.985815] Write protecting the kernel text: 5340k
[    1.985871] Write protecting the kernel read-only data: 2192k
[    1.990881] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.003789] udevd[100]: starting version 173
[    2.023035] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.023057] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    2.023062] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.023128] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    2.023218] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd4f8000
[    2.023232] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[    2.023271] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[    2.023469] xHCI xhci_add_endpoint called for root hub
[    2.023471] xHCI xhci_check_bandwidth called for root hub
[    2.023509] hub 8-0:1.0: USB hub found
[    2.023516] hub 8-0:1.0: 2 ports detected
[    2.023622] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.023697] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    2.023843] xHCI xhci_add_endpoint called for root hub
[    2.023846] xHCI xhci_check_bandwidth called for root hub
[    2.023910] hub 9-0:1.0: USB hub found
[    2.023917] hub 9-0:1.0: 2 ports detected
[    2.027131] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.027146] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.027174] r8169 0000:03:00.0: setting latency timer to 64
[    2.027180] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[    2.027234] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    2.027819] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf8012000, 50:e5:49:59:ed:33, XID 0c900800 IRQ 41
[    2.032261] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.032299] pata_jmicron 0000:04:00.1: setting latency timer to 64
[    2.032819] ahci 0000:00:11.0: version 3.0
[    2.032829] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.032914] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    2.032918] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.033659] scsi0 : pata_jmicron
[    2.033837] scsi1 : pata_jmicron
[    2.033941] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 19
[    2.033944] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 19
[    2.034245] scsi2 : ahci
[    2.034551] scsi3 : ahci
[    2.034631] scsi4 : ahci
[    2.034712] scsi5 : ahci
[    2.034886] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[    2.034889] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[    2.034891] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[    2.034894] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[    2.034942] ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.035007] ahci 0000:04:00.0: irq 42 for MSI/MSI-X
[    2.035065] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.035068] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    2.035074] ahci 0000:04:00.0: setting latency timer to 64
[    2.035378] scsi6 : pata_atiixp
[    2.035765] scsi7 : pata_atiixp
[    2.036175] scsi8 : ahci
[    2.036283] scsi9 : ahci
[    2.036335] ata9: SATA max UDMA/133 abar m512@0xfdbff000 port 0xfdbff100 irq 42
[    2.036339] ata10: SATA max UDMA/133 abar m512@0xfdbff000 port 0xfdbff180 irq 42
[    2.036945] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    2.036949] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    2.108141] Refined TSC clocksource calibration: 3825.617 MHz.
[    2.108155] Switching to clocksource tsc
[    2.220620] ata1.00: ATA-7: SAMSUNG SP1654N, BV100-50, max UDMA/100
[    2.220623] ata1.00: 312581808 sectors, multi 0: LBA48 
[    2.220746] ata1.01: ATA-7: SAMSUNG SP0812N, TK100-30, max UDMA/100
[    2.220748] ata1.01: 156368016 sectors, multi 0: LBA48 
[    2.252695] ata1.00: configured for UDMA/100
[    2.260121] usb 4-1: new low speed USB device number 2 using ohci_hcd
[    2.260646] ata1.01: configured for UDMA/100
[    2.260746] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1654N  BV10 PQ: 0 ANSI: 5
[    2.260879] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.260940] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.260973] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP0812N  TK10 PQ: 0 ANSI: 5
[    2.261013] sd 0:0:0:0: [sda] Write Protect is off
[    2.261016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.261047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.261105] sd 0:0:1:0: [sdb] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.261114] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.261147] sd 0:0:1:0: [sdb] Write Protect is off
[    2.261150] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.261173] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.304187]  sda: sda1 sda2 < sda5 > sda3 sda4
[    2.347566]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > sdb4
[    2.347655] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.348054] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.352123] ata3: SATA link down (SStatus 0 SControl 300)
[    2.352177] ata5: SATA link down (SStatus 0 SControl 300)
[    2.352240] ata6: SATA link down (SStatus 0 SControl 300)
[    2.356129] ata9: SATA link down (SStatus 0 SControl 300)
[    2.360136] ata10: SATA link down (SStatus 0 SControl 300)
[    2.524127] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.524631] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
[    2.525478] ata4.00: configured for UDMA/100
[    2.526583] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB01 PQ: 0 ANSI: 5
[    2.529149] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.529155] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.529381] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.529430] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.537629] input: MLK Trust Mouse 15313 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input3
[    2.538496] generic-usb 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse 15313] on usb-0000:00:12.0-1/input0
[    2.538574] usbcore: registered new interface driver usbhid
[    2.538575] usbhid: USB HID core driver
[    3.587900] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   17.639705] udevd[356]: starting version 173
[   17.659610] Adding 2048280k swap on /dev/sda3.  Priority:-1 extents:1 across:2048280k 
[   17.669197] lp: driver loaded but no devices found
[   17.670371] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   17.670374] Disabling lock debugging due to kernel taint
[   17.672266] wmi: Mapper loaded
[   17.717864] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.728482] udevd[375]: renamed network interface eth0 to eth1
[   17.747118] type=1400 audit(1325096351.256:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=471 comm="apparmor_parser"
[   17.747400] type=1400 audit(1325096351.256:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=471 comm="apparmor_parser"
[   17.747582] type=1400 audit(1325096351.256:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=471 comm="apparmor_parser"
[   17.766077] Adding 2048280k swap on /dev/sdb4.  Priority:-2 extents:1 across:2048280k 
[   17.770396] [fglrx] Maximum main memory to use for locked dma buffers: 3126 MBytes.
[   17.770621] [fglrx]   vendor: 1002 device: 6739 count: 1
[   17.771471] [fglrx] ioport: bar 4, base 0xce00, size: 0x100
[   17.771487] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   17.771494] pci 0000:01:00.0: setting latency timer to 64
[   17.772471] [fglrx] Kernel PAT support is enabled
[   17.772491] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[   17.775049] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   17.775111] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
[   17.775144] HDA Intel 0000:01:00.1: setting latency timer to 64
[   17.789965] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   17.790407] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   17.790563] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[   17.792373] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[   17.792548] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
[   19.076657] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[   19.087439] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[   19.087441] vesafb: scrolling: redraw
[   19.087444] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   19.094627] vesafb: framebuffer at 0xd0000000, mapped to 0xfa500000, using 5120k, total 5120k
[   19.094734] fbcon: VESA VGA (fb0) is primary device
[   19.094837] Console: switching to colour frame buffer device 160x64
[   19.094867] fb0: VESA VGA frame buffer device
[   19.207884] EXT3-fs: barriers not enabled
[   19.238329] kjournald starting.  Commit interval 5 seconds
[   19.257298] EXT3-fs (sdb1): using internal journal
[   19.257309] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[   19.491943] ppdev: user-space parallel port driver
[   19.499658] type=1400 audit(1325096353.008:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=932 comm="apparmor_parser"
[   19.500039] type=1400 audit(1325096353.012:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=932 comm="apparmor_parser"
[   19.560996] r8169 0000:03:00.0: eth1: link down
[   19.561064] r8169 0000:03:00.0: eth1: link down
[   19.561148] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   19.607558] type=1400 audit(1325096353.116:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=952 comm="apparmor_parser"
[   19.607858] type=1400 audit(1325096353.116:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=958 comm="apparmor_parser"
[   19.607878] type=1400 audit(1325096353.116:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=953 comm="apparmor_parser"
[   19.608101] type=1400 audit(1325096353.120:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=958 comm="apparmor_parser"
[   19.608114] type=1400 audit(1325096353.120:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=959 comm="apparmor_parser"
[   19.704323] init: failsafe main process (870) killed by TERM signal
[   19.704980] init: apport pre-start process (991) terminated with status 1
[   19.711567] init: apport post-stop process (1025) terminated with status 1
[   19.926881] Bluetooth: Core ver 2.16
[   19.926900] NET: Registered protocol family 31
[   19.926902] Bluetooth: HCI device and connection manager initialized
[   19.926905] Bluetooth: HCI socket layer initialized
[   19.926907] Bluetooth: L2CAP socket layer initialized
[   19.926970] Bluetooth: SCO socket layer initialized
[   19.928960] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.928963] Bluetooth: BNEP filters: protocol multicast
[   19.929117] Bluetooth: RFCOMM TTY layer initialized
[   19.929122] Bluetooth: RFCOMM socket layer initialized
[   19.929123] Bluetooth: RFCOMM ver 1.11
[   20.406953] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[   20.407495] [fglrx] Firegl kernel thread PID: 1165
[   20.407539] [fglrx] Firegl kernel thread PID: 1166
[   20.407581] [fglrx] Firegl kernel thread PID: 1167
[   20.407962] [fglrx] IRQ 44 Enabled
[   20.675085] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   20.708454] [fglrx] Gart USWC size:1024 M.
[   20.708457] [fglrx] Gart cacheable size:405 M.
[   20.708462] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   20.708465] [fglrx] Reserved FB block: Unshared offset:fccb000, size:335000 
[   20.708467] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
[   21.167721] r8169 0000:03:00.0: eth1: link up
[   21.167979] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   22.568963] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[   31.328016] eth1: no IPv6 routers present
[   88.148130] usb 2-4: new high speed USB device number 2 using ehci_hcd
[   88.281654] hub 2-4:1.0: USB hub found
[   88.281897] hub 2-4:1.0: 1 port detected
[   96.464601] usb 2-4.1: new high speed USB device number 3 using ehci_hcd
[   96.559658] generic-usb 0003:043D:0142.0002: hiddev0,hidraw1: USB HID v1.00 Device [Lexmark  3600-4600 Series] on usb-0000:00:13.2-4.1/input3
[   96.926662] Did not find alt setting 1 for intf 0, config 1
[   96.994333] usbcore: registered new interface driver uas
[   97.013427] Initializing USB Mass Storage driver...
[   97.013669] scsi10 : usb-storage 2-4.1:1.2
[   97.013895] usbcore: registered new interface driver usb-storage
[   97.013900] USB Mass Storage support registered.
[  102.829995] scsi 10:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
[  103.200437] sd 10:0:0:0: Attached scsi generic sg3 type 0
[  103.202329] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 6754.093643] audit_printk_skb: 33 callbacks suppressed
[ 6754.093650] type=1400 audit(1325110287.921:23): apparmor="DENIED" operation="open" parent=2689 profile="/usr/bin/evince-thumbnailer" name="/run/udev/data/b8:18" pid=2690 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[13500.135884] usb 2-4: USB disconnect, device number 2
[13500.135888] usb 2-4.1: USB disconnect, device number 3
[31526.072127] usb 2-4: new high speed USB device number 4 using ehci_hcd
[31526.204821] hub 2-4:1.0: USB hub found
[31526.204991] hub 2-4:1.0: 1 port detected
[31534.388788] usb 2-4.1: new high speed USB device number 5 using ehci_hcd
[31534.483676] scsi11 : usb-storage 2-4.1:1.2
[31534.484843] generic-usb 0003:043D:0142.0003: hiddev0,hidraw1: USB HID v1.00 Device [Lexmark  3600-4600 Series] on usb-0000:00:13.2-4.1/input3
[31535.511638] Did not find alt setting 1 for intf 0, config 1
[31540.884718] scsi 11:0:0:0: Direct-Access     Lexmark  USB Mass Storage  200 PQ: 0 ANSI: 0
[31541.128623] sd 11:0:0:0: Attached scsi generic sg3 type 0
[31541.130511] sd 11:0:0:0: [sdc] Attached SCSI removable disk

Return To test2 System Information