dmesg - maru
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fed0000 (usable)
[ 0.000000] BIOS-e820: 000000006fed0000 - 000000006fee5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fee5000 - 000000006fee6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fee6000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ50 Notebook PC/360A, BIOS F.07 06/26/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x6fed0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-protect
[ 0.000000] E0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7ff0] f7ff0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365f4000 - 372f2000
[ 0.000000] ACPI: RSDP 000f7f30 00024 (v03 HPQOEM)
[ 0.000000] ACPI: XSDT 6fedddf7 0005C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 6fee49d3 000F4 (v03 HPQOEM SLIC-MPC 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 6fedde53 06B0C (v01 HPQOEM SLIC-MPC 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 6fee5fc0 00040
[ 0.000000] ACPI: SLIC 6fed0000 00176 (v01 HPQOEM SLIC-MPC 00000001 HPQ 00000001)
[ 0.000000] ACPI: MCFG 6fee4c3d 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 6fee4c79 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 6fee4cb1 00072 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 6fee4d23 00028 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 6fee4d4b 002B5 (v01 HPQOEM SLIC-MP 06040000 00000150)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 902MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0006fed0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0006fed0
[ 0.000000] On node 0 totalpages: 458334
[ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f57f4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1806 pages used for memmap
[ 0.000000] HighMem zone: 229316 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26240 r0 d22912 u2097152
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454752
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7334912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0006fed0)
[ 0.000000] Memory: 1788064k/1833792k available (5329k kernel code, 45272k reserved, 2589k data, 696k init, 924488k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
[ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1899.795 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.59 BogoMIPS (lpj=7599180)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004043] Security Framework initialized
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004069] Yama: becoming mindful.
[ 0.004146] Mount-cache hash table entries: 512
[ 0.004328] Initializing cgroup subsys cpuacct
[ 0.004337] Initializing cgroup subsys memory
[ 0.004348] Initializing cgroup subsys devices
[ 0.004352] Initializing cgroup subsys freezer
[ 0.004356] Initializing cgroup subsys net_cls
[ 0.004360] Initializing cgroup subsys blkio
[ 0.004370] Initializing cgroup subsys perf_event
[ 0.004409] CPU: Physical Processor ID: 0
[ 0.004412] CPU: Processor Core ID: 0
[ 0.004417] mce: CPU supports 5 MCE banks
[ 0.010828] ACPI: Core revision 20110413
[ 0.016019] ftrace: allocating 24885 entries in 49 pages
[ 0.020103] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.061965] CPU0: AMD Athlon Dual-Core QL-60 stepping 01
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] CPU 1 irqstacks, hard=f44a4000 soft=f44a6000
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Initializing CPU#1
[ 0.152008] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.152008] Measured 1061526865 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.152008] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.152021] Brought up 2 CPUs
[ 0.152024] Total of 2 processors activated (7599.80 BogoMIPS).
[ 0.152574] devtmpfs: initialized
[ 0.152574] PM: Registering ACPI NVS region at 6fee5000 (4096 bytes)
[ 0.154492] print_constraints: dummy:
[ 0.154556] Time: 4:31:36 Date: 11/22/11
[ 0.154612] NET: Registered protocol family 16
[ 0.154656] Trying to unpack rootfs image as initramfs...
[ 0.154791] EISA bus registered
[ 0.154803] TOM: 0000000080000000 aka 2048M
[ 0.154806] Fam 10h mmconf [e0000000, efffffff]
[ 0.154893] Extended Config Space enabled on 0 nodes
[ 0.154905] ACPI: bus type pci registered
[ 0.156078] PCI: MMCONFIG for domain 0000 [bus 00-08] at [mem 0xe0000000-0xe08fffff] (base 0xe0000000)
[ 0.156083] PCI: MMCONFIG at [mem 0xe0000000-0xe08fffff] reserved in E820
[ 0.156085] PCI: Using MMCONFIG for extended config space
[ 0.156088] PCI: Using configuration type 1 for base access
[ 0.157437] bio: create slab at 0
[ 0.158811] ACPI: EC: Look up EC in DSDT
[ 0.161663] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.172077] ACPI: Interpreter enabled
[ 0.172083] ACPI: (supports S0 S3 S4 S5)
[ 0.172105] ACPI: Using IOAPIC for interrupt routing
[ 0.190024] ACPI: EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
[ 0.190195] ACPI: No dock devices found.
[ 0.190198] HEST: Table not found.
[ 0.190202] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.190362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.190546] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.190550] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.190553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.190557] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.190561] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.190564] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.190568] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.190572] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.190575] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.190579] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.190583] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.190586] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.190590] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.190594] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.190597] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.190601] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.190605] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.190614] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]
[ 0.190660] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
[ 0.190923] pci 0000:00:01.0: [10de:075e] type 0 class 0x000601
[ 0.190935] pci 0000:00:01.0: reg 10: [io 0x1a00-0x1aff]
[ 0.190994] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
[ 0.191011] pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
[ 0.191040] pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
[ 0.191049] pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
[ 0.191080] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.191088] pci 0000:00:01.1: PME# disabled
[ 0.191112] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
[ 0.191134] pci 0000:00:01.3: reg 10: [mem 0xc0080000-0xc00fffff]
[ 0.191263] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
[ 0.191358] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
[ 0.191374] pci 0000:00:02.0: reg 10: [mem 0xc0006000-0xc0006fff]
[ 0.191428] pci 0000:00:02.0: supports D1 D2
[ 0.191430] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191436] pci 0000:00:02.0: PME# disabled
[ 0.191454] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
[ 0.191472] pci 0000:00:02.1: reg 10: [mem 0xc0007000-0xc00070ff]
[ 0.191532] pci 0000:00:02.1: supports D1 D2
[ 0.191535] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191540] pci 0000:00:02.1: PME# disabled
[ 0.191567] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
[ 0.191583] pci 0000:00:04.0: reg 10: [mem 0xc0008000-0xc0008fff]
[ 0.191637] pci 0000:00:04.0: supports D1 D2
[ 0.191640] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191645] pci 0000:00:04.0: PME# disabled
[ 0.191663] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
[ 0.191680] pci 0000:00:04.1: reg 10: [mem 0xc0007400-0xc00074ff]
[ 0.191741] pci 0000:00:04.1: supports D1 D2
[ 0.191743] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191749] pci 0000:00:04.1: PME# disabled
[ 0.191776] pci 0000:00:06.0: [10de:0759] type 0 class 0x000101
[ 0.192015] pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf]
[ 0.192062] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
[ 0.192081] pci 0000:00:07.0: reg 10: [mem 0xc0000000-0xc0003fff]
[ 0.192142] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.192147] pci 0000:00:07.0: PME# disabled
[ 0.192170] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
[ 0.192234] pci 0000:00:09.0: [10de:0ad0] type 0 class 0x000101
[ 0.192252] pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
[ 0.192261] pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
[ 0.192269] pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
[ 0.192278] pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
[ 0.192287] pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
[ 0.192295] pci 0000:00:09.0: reg 24: [mem 0xc0004000-0xc0005fff]
[ 0.192345] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
[ 0.192363] pci 0000:00:0a.0: reg 10: [mem 0xc0009000-0xc0009fff]
[ 0.192372] pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
[ 0.192381] pci 0000:00:0a.0: reg 18: [mem 0xc0007c00-0xc0007cff]
[ 0.192390] pci 0000:00:0a.0: reg 1c: [mem 0xc0007800-0xc000780f]
[ 0.192429] pci 0000:00:0a.0: supports D1 D2
[ 0.192432] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192438] pci 0000:00:0a.0: PME# disabled
[ 0.192459] pci 0000:00:0b.0: [10de:0569] type 1 class 0x000604
[ 0.192503] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192508] pci 0000:00:0b.0: PME# disabled
[ 0.192577] pci 0000:00:14.0: [10de:077a] type 1 class 0x000604
[ 0.192769] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192778] pci 0000:00:14.0: PME# disabled
[ 0.192833] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[ 0.192872] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[ 0.192902] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[ 0.192934] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[ 0.192971] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[ 0.193073] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.193079] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.193085] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.193091] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193095] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.193099] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.193102] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.193106] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.193109] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.193113] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.193117] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.193120] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.193124] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.193128] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.193131] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.193135] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.193139] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.193142] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.193146] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.193150] pci 0000:00:08.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.193191] pci 0000:02:00.0: [10de:0845] type 0 class 0x000300
[ 0.193205] pci 0000:02:00.0: reg 10: [mem 0xc1000000-0xc1ffffff]
[ 0.193218] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193230] pci 0000:02:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit pref]
[ 0.193239] pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
[ 0.193248] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.193294] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.193300] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.193305] pci 0000:00:0b.0: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.193312] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.193500] pci 0000:07:00.0: [168c:001c] type 0 class 0x000200
[ 0.193522] pci 0000:07:00.0: reg 10: [mem 0xc2000000-0xc200ffff 64bit]
[ 0.193625] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.193642] pci 0000:00:14.0: PCI bridge to [bus 07-07]
[ 0.193658] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.193668] pci 0000:00:14.0: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.193685] pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193710] pci_bus 0000:00: on NUMA node 0
[ 0.193714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.193915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.194025] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.194155] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x08
[ 0.194158] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.208083] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.208178] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.208273] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.208367] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.208461] ACPI: PCI Interrupt Link [Z012] (IRQs 19 20 21 22 23) *10
[ 0.208553] ACPI: PCI Interrupt Link [Z013] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.208646] ACPI: PCI Interrupt Link [Z014] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.208740] ACPI: PCI Interrupt Link [Z015] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.208833] ACPI: PCI Interrupt Link [LSMB] (IRQs 18) *10
[ 0.208923] ACPI: PCI Interrupt Link [LUS0] (IRQs 17) *11
[ 0.209013] ACPI: PCI Interrupt Link [LUS2] (IRQs 17) *7
[ 0.209104] ACPI: PCI Interrupt Link [LMAC] (IRQs 19 20 21 22 23) *11
[ 0.209197] ACPI: PCI Interrupt Link [LAZA] (IRQs 19 20 21 22 23) *10
[ 0.209290] ACPI: PCI Interrupt Link [LGPU] (IRQs 19 20 21 22 23) *10
[ 0.209382] ACPI: PCI Interrupt Link [LPID] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.209475] ACPI: PCI Interrupt Link [LSI0] (IRQs 19 20 21 22 23) *11
[ 0.209568] ACPI: PCI Interrupt Link [LSI1] (IRQs 19 20 21 22 23) *0, disabled.
[ 0.209661] ACPI: PCI Interrupt Link [Z010] (IRQs 16) *5
[ 0.209752] ACPI: PCI Interrupt Link [Z011] (IRQs 16) *10
[ 0.209843] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
[ 0.209979] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.209983] vgaarb: loaded
[ 0.209985] vgaarb: bridge control possible 0000:02:00.0
[ 0.210292] SCSI subsystem initialized
[ 0.210383] libata version 3.00 loaded.
[ 0.210445] usbcore: registered new interface driver usbfs
[ 0.210460] usbcore: registered new interface driver hub
[ 0.210495] usbcore: registered new device driver usb
[ 0.210619] PCI: Using ACPI for IRQ routing
[ 0.210808] PCI: pci_cache_line_size set to 64 bytes
[ 0.210906] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.210909] reserve RAM buffer: 000000006fed0000 - 000000006fffffff
[ 0.211036] NetLabel: Initializing
[ 0.211038] NetLabel: domain hash size = 128
[ 0.211041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.211056] NetLabel: unlabeled traffic allowed by default
[ 0.211108] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.211116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.211122] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.216144] Switching to clocksource hpet
[ 0.219396] Switched to NOHz mode on CPU #0
[ 0.219511] Switched to NOHz mode on CPU #1
[ 0.225399] AppArmor: AppArmor Filesystem Enabled
[ 0.225441] pnp: PnP ACPI init
[ 0.225462] ACPI: bus type pnp registered
[ 0.225627] pnp 00:00: [bus 00-ff]
[ 0.225631] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.225634] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.225637] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.225641] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.225644] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.225647] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.225650] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.225654] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.225657] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.225660] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.225663] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.225666] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.225670] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.225673] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.225676] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.225679] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.225682] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.225686] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.225771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.225896] pnp 00:01: [irq 0 disabled]
[ 0.225914] pnp 00:01: [irq 8]
[ 0.225917] pnp 00:01: [mem 0xfed00000-0xfed003ff]
[ 0.225954] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.225974] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.226050] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.226055] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226070] pnp 00:03: [io 0x0010-0x001f]
[ 0.226073] pnp 00:03: [io 0x0022-0x003f]
[ 0.226076] pnp 00:03: [io 0x0044-0x005f]
[ 0.226079] pnp 00:03: [io 0x0063]
[ 0.226081] pnp 00:03: [io 0x0065]
[ 0.226084] pnp 00:03: [io 0x0067-0x006f]
[ 0.226087] pnp 00:03: [io 0x0072-0x0073]
[ 0.226089] pnp 00:03: [io 0x0074-0x007f]
[ 0.226092] pnp 00:03: [io 0x0080]
[ 0.226095] pnp 00:03: [io 0x0084]
[ 0.226097] pnp 00:03: [io 0x0091-0x0093]
[ 0.226100] pnp 00:03: [io 0x0097-0x009f]
[ 0.226103] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.226105] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.226108] pnp 00:03: [io 0x0360-0x0361]
[ 0.226111] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.226114] pnp 00:03: [mem 0xff800000-0xff800fff]
[ 0.226188] system 00:03: [io 0x0360-0x0361] has been reserved
[ 0.226192] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.226196] system 00:03: [mem 0xff800000-0xff800fff] has been reserved
[ 0.226200] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226217] pnp 00:04: [io 0x0000-0x0008]
[ 0.226220] pnp 00:04: [io 0x000a-0x000f]
[ 0.226222] pnp 00:04: [io 0x0081-0x0083]
[ 0.226225] pnp 00:04: [io 0x0087]
[ 0.226228] pnp 00:04: [io 0x0089-0x008b]
[ 0.226230] pnp 00:04: [io 0x008f]
[ 0.226233] pnp 00:04: [io 0x00c0-0x00d1]
[ 0.226236] pnp 00:04: [io 0x00d4-0x00df]
[ 0.226239] pnp 00:04: [dma 4]
[ 0.226279] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.226289] pnp 00:05: [io 0x0061]
[ 0.226326] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.226353] pnp 00:06: [io 0x0070-0x0071]
[ 0.226390] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.226401] pnp 00:07: [io 0x00f0-0x00f1]
[ 0.226413] pnp 00:07: [irq 13]
[ 0.226451] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.226462] pnp 00:08: [io 0x0060]
[ 0.226465] pnp 00:08: [io 0x0064]
[ 0.226475] pnp 00:08: [irq 1]
[ 0.226522] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.226541] pnp 00:09: [irq 12]
[ 0.226588] pnp 00:09: Plug and Play ACPI device, IDs SYN0158 SYN0300 SYN0002 PNP0f13 (active)
[ 0.228982] pnp 00:0a: [io 0x1000-0x107f]
[ 0.228985] pnp 00:0a: [io 0x1080-0x10ff]
[ 0.228988] pnp 00:0a: [io 0x1200-0x127f]
[ 0.228993] pnp 00:0a: [io 0x1280-0x12ff]
[ 0.228996] pnp 00:0a: [io 0x1400-0x147f]
[ 0.228999] pnp 00:0a: [io 0x1480-0x14ff]
[ 0.229063] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.229066] system 00:0a: [io 0x1080-0x10ff] has been reserved
[ 0.229070] system 00:0a: [io 0x1200-0x127f] has been reserved
[ 0.229073] system 00:0a: [io 0x1280-0x12ff] has been reserved
[ 0.229077] system 00:0a: [io 0x1400-0x147f] has been reserved
[ 0.229080] system 00:0a: [io 0x1480-0x14ff] has been reserved
[ 0.229084] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229471] pnp 00:0b: [mem 0xffc00000-0xffffffff]
[ 0.229474] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.229477] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 0.229480] pnp 00:0b: [mem 0xfed00000-0xfed00fff]
[ 0.229483] pnp 00:0b: [mem 0x00000000-0xffffffff disabled]
[ 0.229487] pnp 00:0b: [mem 0xfef00000-0xfef00fff]
[ 0.229560] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.229564] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.229568] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.229572] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.229576] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved
[ 0.229580] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229588] pnp: PnP ACPI: found 12 devices
[ 0.229590] ACPI: ACPI bus type pnp unregistered
[ 0.229594] PnPBIOS: Disabled by ACPI PNP
[ 0.266114] PCI: max bus depth: 1 pci_try_num: 2
[ 0.266153] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.266156] pci 0000:00:08.0: bridge window [io disabled]
[ 0.266162] pci 0000:00:08.0: bridge window [mem disabled]
[ 0.266166] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.266177] pci 0000:02:00.0: BAR 6: assigned [mem 0xc6000000-0xc601ffff pref]
[ 0.266182] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.266186] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.266191] pci 0000:00:0b.0: bridge window [mem 0xc1000000-0xc1ffffff]
[ 0.266196] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.266437] pci 0000:00:14.0: PCI bridge to [bus 07-07]
[ 0.266439] pci 0000:00:14.0: bridge window [io disabled]
[ 0.266451] pci 0000:00:14.0: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.266460] pci 0000:00:14.0: bridge window [mem pref disabled]
[ 0.266482] pci 0000:00:08.0: setting latency timer to 64
[ 0.266491] pci 0000:00:0b.0: setting latency timer to 64
[ 0.266687] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 23
[ 0.266706] pci 0000:00:14.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 0.266716] pci 0000:00:14.0: setting latency timer to 64
[ 0.266723] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266727] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.266730] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266733] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.266737] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.266740] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.266744] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.266747] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.266750] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.266754] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.266757] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.266760] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.266764] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.266767] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.266770] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.266774] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff]
[ 0.266777] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.266781] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.266784] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266787] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.266791] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.266794] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.266797] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.266801] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.266804] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.266807] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.266811] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.266814] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.266817] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.266821] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.266824] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.266828] pci_bus 0000:01: resource 19 [mem 0x80000000-0xfebfffff]
[ 0.266831] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.266834] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 0.266838] pci_bus 0000:02: resource 2 [mem 0xc4000000-0xdfffffff 64bit pref]
[ 0.266842] pci_bus 0000:07: resource 1 [mem 0xc2000000-0xc20fffff]
[ 0.266899] NET: Registered protocol family 2
[ 0.266978] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.267295] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.268049] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.268395] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.268398] TCP reno registered
[ 0.268403] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.268416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.268540] NET: Registered protocol family 1
[ 0.380170] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.380299] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.380439] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.380587] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.380737] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.380824] pci 0000:02:00.0: Boot video device
[ 0.380831] PCI: CLS 0 bytes, default 64
[ 0.380842] Simple Boot Flag at 0x38 set to 0x1
[ 0.381250] audit: initializing netlink socket (disabled)
[ 0.381262] type=2000 audit(1321936295.376:1): initialized
[ 0.412619] highmem bounce pool size: 64 pages
[ 0.412628] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.427099] VFS: Disk quotas dquot_6.5.2
[ 0.427198] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.428096] fuse init (API version 7.16)
[ 0.428214] msgmni has been set to 1686
[ 0.428656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.428691] io scheduler noop registered
[ 0.428694] io scheduler deadline registered
[ 0.428713] io scheduler cfq registered (default)
[ 0.429040] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.429075] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.430436] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.431513] ACPI: AC Adapter [ADP1] (off-line)
[ 0.431597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.432584] ACPI: Lid Switch [LID0]
[ 0.432637] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.432644] ACPI: Sleep Button [SLPB]
[ 0.432709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.432714] ACPI: Power Button [PWRB]
[ 0.432769] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.432773] ACPI: Power Button [PWRF]
[ 0.432811] ACPI: acpi_idle registered with cpuidle
[ 0.454349] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.454353] ACPI: Thermal Zone [TZS0] (42 C)
[ 0.459871] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.459874] ACPI: Thermal Zone [TZS1] (41 C)
[ 0.459900] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.459959] ERST: Table is not found!
[ 0.464068] isapnp: Scanning for PnP cards...
[ 0.531822] ACPI: Battery Slot [BAT0] (battery present)
[ 0.549004] Freeing initrd memory: 13304k freed
[ 0.817162] isapnp: No Plug & Play device found
[ 0.830181] Linux agpgart interface v0.103
[ 0.831815] brd: module loaded
[ 0.832621] loop: module loaded
[ 0.832904] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.833165] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 0.833189] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 0.833208] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.833218] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.833694] Fixed MDIO Bus: probed
[ 0.833732] PPP generic driver version 2.4.2
[ 0.833794] tun: Universal TUN/TAP device driver, 1.6
[ 0.833797] tun: (C) 1999-2004 Max Krasnyansky
[ 0.833903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.834110] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
[ 0.834124] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
[ 0.834144] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.834148] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.834196] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.834229] ehci_hcd 0000:00:02.1: debug port 1
[ 0.834240] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.834268] ehci_hcd 0000:00:02.1: irq 17, io mem 0xc0007000
[ 0.844036] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.844192] hub 1-0:1.0: USB hub found
[ 0.844199] hub 1-0:1.0: 3 ports detected
[ 0.844485] ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
[ 0.844500] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
[ 0.844511] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.844515] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.844561] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.844584] ehci_hcd 0000:00:04.1: debug port 1
[ 0.844594] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.844616] ehci_hcd 0000:00:04.1: irq 16, io mem 0xc0007400
[ 0.856019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.856151] hub 2-0:1.0: USB hub found
[ 0.856156] hub 2-0:1.0: 4 ports detected
[ 0.856240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856454] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 0.856459] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 0.856470] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.856474] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.856523] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.856540] ohci_hcd 0000:00:02.0: irq 17, io mem 0xc0006000
[ 0.914366] hub 3-0:1.0: USB hub found
[ 0.914373] hub 3-0:1.0: 3 ports detected
[ 0.914670] ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
[ 0.914675] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
[ 0.914686] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.914690] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.914743] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.914759] ohci_hcd 0000:00:04.0: irq 16, io mem 0xc0008000
[ 0.970148] hub 4-0:1.0: USB hub found
[ 0.970154] hub 4-0:1.0: 4 ports detected
[ 0.970235] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.970349] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.988802] i8042: Detected active multiplexing controller, rev 1.1
[ 1.001733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.001742] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.001782] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.001812] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.001843] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.001990] mousedev: PS/2 mouse device common for all mice
[ 1.002585] rtc_cmos 00:06: RTC can wake from S4
[ 1.002794] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.002853] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.002967] device-mapper: uevent: version 1.0.3
[ 1.003069] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.003110] EISA: Probing bus 0 at eisa.0
[ 1.003113] EISA: Cannot allocate resource for mainboard
[ 1.003117] Cannot allocate resource for EISA slot 1
[ 1.003120] Cannot allocate resource for EISA slot 2
[ 1.003123] Cannot allocate resource for EISA slot 3
[ 1.003126] Cannot allocate resource for EISA slot 4
[ 1.003129] Cannot allocate resource for EISA slot 5
[ 1.003131] Cannot allocate resource for EISA slot 6
[ 1.003134] Cannot allocate resource for EISA slot 7
[ 1.003137] Cannot allocate resource for EISA slot 8
[ 1.003139] EISA: Detected 0 cards.
[ 1.003152] cpufreq-nforce2: No nForce2 chipset.
[ 1.003156] cpuidle: using governor ladder
[ 1.003158] cpuidle: using governor menu
[ 1.003161] EFI Variables Facility v0.08 2004-May-17
[ 1.003498] TCP cubic registered
[ 1.003667] NET: Registered protocol family 10
[ 1.004378] NET: Registered protocol family 17
[ 1.004403] Registering the dns_resolver key type
[ 1.004429] Using IPI No-Shortcut mode
[ 1.004532] PM: Hibernation image not present or could not be loaded.
[ 1.004548] registered taskstats version 1
[ 1.020147] Magic number: 3:583:515
[ 1.020301] rtc_cmos 00:06: setting system clock to 2011-11-22 04:31:37 UTC (1321936297)
[ 1.020333] powernow-k8: Found 1 AMD Athlon Dual-Core QL-60 (2 cpu cores) (version 2.20.00)
[ 1.020403] powernow-k8: 0 : pstate 0 (1900 MHz)
[ 1.020405] powernow-k8: 1 : pstate 1 (950 MHz)
[ 1.021009] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.021012] EDD information not available.
[ 1.021196] Freeing unused kernel memory: 696k freed
[ 1.021654] Write protecting the kernel text: 5332k
[ 1.021706] Write protecting the kernel read-only data: 2188k
[ 1.027268] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.047579] udevd[83]: starting version 173
[ 1.171076] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.249333] pata_amd 0000:00:06.0: version 0.4.1
[ 1.249394] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.272426] scsi0 : pata_amd
[ 1.275992] scsi1 : pata_amd
[ 1.276126] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.276130] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.276312] ahci 0000:00:09.0: version 3.0
[ 1.276330] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 1.276400] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.276409] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.276460] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
[ 1.276465] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part boh
[ 1.276471] ahci 0000:00:09.0: setting latency timer to 64
[ 1.279342] scsi2 : ahci
[ 1.281298] scsi3 : ahci
[ 1.281442] ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 40
[ 1.281446] ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 40
[ 1.281529] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.281815] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 1.281838] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.281844] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.322117] usbcore: registered new interface driver uas
[ 1.428025] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 1.432155] ata2: port disabled. ignoring.
[ 1.600042] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.600065] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.602552] ata4.00: ATA-8: SAMSUNG HM160HI, HH100-12, max UDMA/100
[ 1.602558] ata4.00: 312581808 sectors, multi 16: LBA48
[ 1.605097] ata4.00: configured for UDMA/100
[ 1.614228] ata3.00: ATAPI: Optiarc DVD RW AD-7581S, 4H02, max UDMA/100
[ 1.629138] ata3.00: configured for UDMA/100
[ 1.632654] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7581S 4H02 PQ: 0 ANSI: 5
[ 1.636646] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.636650] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.636825] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.636922] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.637105] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5
[ 1.637249] sd 3:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.637259] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.637319] sd 3:0:0:0: [sda] Write Protect is off
[ 1.637323] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.637370] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.661169] sda: sda1 sda2
[ 1.661669] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.663011] Initializing USB Mass Storage driver...
[ 1.663093] usbcore: registered new interface driver usb-storage
[ 1.663095] USB Mass Storage support registered.
[ 1.668595] scsi4 : usb-storage 1-1:1.0
[ 1.668749] usbcore: registered new interface driver ums-realtek
[ 1.805217] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:72:69:e4:2e
[ 1.805224] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
[ 2.322382] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.671211] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.708371] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.713699] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 18.741022] udevd[344]: starting version 173
[ 18.781843] lp: driver loaded but no devices found
[ 18.874111] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 18.874177] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 18.987814] wmi: Mapper loaded
[ 19.238417] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.262892] type=1400 audit(1321957915.739:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=627 comm="apparmor_parser"
[ 19.264602] type=1400 audit(1321957915.743:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=627 comm="apparmor_parser"
[ 19.264935] type=1400 audit(1321957915.743:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=627 comm="apparmor_parser"
[ 19.265032] acpi device:0c: registered as cooling_device2
[ 19.265609] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:00/input/input5
[ 19.266057] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 19.298494] cfg80211: Calling CRDA to update world regulatory domain
[ 19.303070] Linux video capture interface: v2.00
[ 19.305680] uvcvideo: Found UVC 1.00 device CNF7047 (04f2:b091)
[ 19.324180] input: CNF7047 as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input6
[ 19.324336] usbcore: registered new interface driver uvcvideo
[ 19.324339] USB Video Class driver (v1.1.0)
[ 19.334272] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 19.334288] ath5k 0000:07:00.0: setting latency timer to 64
[ 19.334351] ath5k 0000:07:00.0: registered as 'phy0'
[ 19.841670] ath: EEPROM regdomain: 0x67
[ 19.841675] ath: EEPROM indicates we should expect a direct regpair map
[ 19.841680] ath: Country alpha2 being used: 00
[ 19.841683] ath: Regpair used: 0x67
[ 19.842755] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842761] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842765] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842768] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842771] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842775] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842778] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842786] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842789] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842792] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842795] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842799] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842802] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842805] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842808] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842812] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842814] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842818] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842821] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842824] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842827] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842831] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842834] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842837] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842840] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 19.842844] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 19.842847] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 19.842980] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 19.854112] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 19.854137] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 19.854142] hda_intel: Disabling MSI
[ 19.854194] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 19.860347] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.863720] Registered led device: ath5k-phy0::rx
[ 19.863830] Registered led device: ath5k-phy0::tx
[ 19.863845] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 19.971659] nvidia: module license 'NVIDIA' taints kernel.
[ 19.971665] Disabling lock debugging due to kernel taint
[ 20.282410] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 20.294643] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 20.294649] cfg80211: World regulatory domain updated:
[ 20.294652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.294656] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.294660] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.294664] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.294667] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.294671] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.547119] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 20.648412] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k
[ 20.681548] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 19
[ 20.681575] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 19 (level, low) -> IRQ 19
[ 20.681585] nvidia 0000:02:00.0: setting latency timer to 64
[ 20.681592] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.682381] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.30 Thu Apr 14 08:47:14 PDT 2011
[ 20.700620] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 20.984815] type=1400 audit(1321957917.463:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=900 comm="apparmor_parser"
[ 20.995357] type=1400 audit(1321957917.471:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=902 comm="apparmor_parser"
[ 20.995908] type=1400 audit(1321957917.471:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=902 comm="apparmor_parser"
[ 20.996604] type=1400 audit(1321957917.475:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=902 comm="apparmor_parser"
[ 21.003341] type=1400 audit(1321957917.479:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=899 comm="apparmor_parser"
[ 21.017091] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 21.017096] vesafb: scrolling: redraw
[ 21.017100] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 21.017509] vesafb: framebuffer at 0xc5000000, mapped to 0xf8700000, using 1216k, total 1216k
[ 21.017734] Console: switching to colour frame buffer device 80x30
[ 21.017754] fb0: VESA VGA frame buffer device
[ 21.037742] ppdev: user-space parallel port driver
[ 21.046335] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000
[ 21.057965] type=1400 audit(1321957917.535:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=905 comm="apparmor_parser"
[ 21.061466] type=1400 audit(1321957917.539:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=925 comm="apparmor_parser"
[ 21.107871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 21.389322] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 21.389536] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 21.390219] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.402995] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.464719] init: failsafe main process (847) killed by TERM signal
[ 21.470869] init: apport pre-start process (979) terminated with status 1
[ 21.492249] init: apport post-stop process (1022) terminated with status 1
[ 21.509127] init: gdm main process (1020) killed by TERM signal
[ 21.514775] Bluetooth: Core ver 2.16
[ 21.514813] NET: Registered protocol family 31
[ 21.514816] Bluetooth: HCI device and connection manager initialized
[ 21.514820] Bluetooth: HCI socket layer initialized
[ 21.514823] Bluetooth: L2CAP socket layer initialized
[ 21.520355] Bluetooth: SCO socket layer initialized
[ 21.550938] Bluetooth: RFCOMM TTY layer initialized
[ 21.550948] Bluetooth: RFCOMM socket layer initialized
[ 21.550951] Bluetooth: RFCOMM ver 1.11
[ 21.660124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.660130] Bluetooth: BNEP filters: protocol multicast
[ 21.805162] init: anacron main process (1014) killed by TERM signal
[ 22.252607] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[ 24.567519] wlan0: authenticate with 00:23:69:75:09:4f (try 1)
[ 24.569005] wlan0: authenticated
[ 24.569556] wlan0: associate with 00:23:69:75:09:4f (try 1)
[ 24.571769] wlan0: RX AssocResp from 00:23:69:75:09:4f (capab=0x411 status=0 aid=2)
[ 24.571773] wlan0: associated
[ 24.572794] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.573961] cfg80211: Calling CRDA for country: TW
[ 24.580302] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580308] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580312] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580316] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580319] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580322] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580325] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580329] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580332] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580335] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580338] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580342] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580345] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580348] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580351] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580355] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580358] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580362] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580365] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580368] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580371] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.580375] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 24.580377] cfg80211: Disabling freq 2467 MHz
[ 24.580380] cfg80211: Disabling freq 2472 MHz
[ 24.580382] cfg80211: Disabling freq 2484 MHz
[ 24.580388] cfg80211: Regulatory domain changed to country: TW
[ 24.580390] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.580394] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 24.580398] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 24.580401] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 25.433848] wlan0: IPv6 duplicate address fe80::222:69ff:fe03:cf95 detected!
[ 31.329986] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600