dmesg - 1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1-rc9-emo (emil@) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Oct 22 22:44:00 BST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-emo root=/dev/sda3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffa8000 (usable)
[ 0.000000] BIOS-e820: 00000000dffa8000 - 00000000dffb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffbff00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dffbff00 - 00000000dfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. K70IO /K70IO , BIOS 220 06/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdffa8 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dffa8000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dffa8000 page 4k
[ 0.000000] kernel direct mapping tables up to dffa8000 @ dffa2000-dffa8000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ 11fffa000-120000000
[ 0.000000] RAMDISK: 37c16000 - 37e03000
[ 0.000000] ACPI: RSDP 00000000000fa3d0 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000dffb0100 0007C (v01 _ASUS_ Notebook 20100623 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dffb0290 000F4 (v03 _ASUS_ FACP1534 20100623 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dffb06f0 0E3BB (v01 K70IO K70IO204 00000204 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dffbff00 00040
[ 0.000000] ACPI: APIC 00000000dffb0390 00080 (v01 _ASUS_ APIC1534 20100623 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dffb0450 0003C (v01 _ASUS_ OEMMCFG 20100623 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000dffb0490 00176 (v01 _ASUS_ Notebook 20100623 MSFT 00000097)
[ 0.000000] ACPI: WDRT 00000000dffb0610 00047 (v01 _ASUS_ NV-WDRT 20100623 MSFT 00000097)
[ 0.000000] ACPI: ECDT 00000000dffb0690 00054 (v01 _ASUS_ OEMECDT 20100623 MSFT 00000097)
[ 0.000000] ACPI: DBGP 00000000dffb0410 00034 (v01 _ASUS_ DBGP1534 20100623 MSFT 00000097)
[ 0.000000] ACPI: BOOT 00000000dffb0660 00028 (v01 _ASUS_ BOOT1534 20100623 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dffbff40 00079 (v01 _ASUS_ OEMB1534 20100623 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dffbf6f0 00038 (v01 _ASUS_ OEMHPET0 20100623 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dffc0d30 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dffa8
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048374
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897000 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dffa8000 - 00000000dffb0000
[ 0.000000] PM: Registered nosave memory: 00000000dffb0000 - 00000000dffbf000
[ 0.000000] PM: Registered nosave memory: 00000000dffbf000 - 00000000dffc0000
[ 0.000000] PM: Registered nosave memory: 00000000dffc0000 - 00000000dfff0000
[ 0.000000] PM: Registered nosave memory: 00000000dfff0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011fc00000 s76160 r8192 d22144 u524288
[ 0.000000] pcpu-alloc: s76160 r8192 d22144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029937
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-emo root=/dev/sda3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4049876k/4718592k available (3943k kernel code, 525096k absent, 143620k reserved, 3429k data, 660k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.169 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.01 BogoMIPS (lpj=6667230)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003485] Security Framework initialized
[ 0.003493] AppArmor: AppArmor disabled by boot time parameter
[ 0.003906] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007664] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009002] Mount-cache hash table entries: 256
[ 0.009559] Initializing cgroup subsys cpuacct
[ 0.009600] Initializing cgroup subsys memory
[ 0.009622] Initializing cgroup subsys devices
[ 0.009625] Initializing cgroup subsys freezer
[ 0.009627] Initializing cgroup subsys blkio
[ 0.009694] CPU: Physical Processor ID: 0
[ 0.009695] CPU: Processor Core ID: 0
[ 0.009698] mce: CPU supports 6 MCE banks
[ 0.009708] CPU0: Thermal monitoring enabled (TM2)
[ 0.009714] using mwait in idle threads.
[ 0.011057] ACPI: Core revision 20110623
[ 0.020014] ftrace: allocating 15483 entries in 61 pages
[ 0.023792] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058786] CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a
[ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.077055] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103342] Booting Node 0, Processors #1
[ 0.103346] smpboot cpu 1: start_ip = 99000
[ 0.200024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206658] Brought up 2 CPUs
[ 0.206661] Total of 2 processors activated (8003.75 BogoMIPS).
[ 0.207422] devtmpfs: initialized
[ 0.207927] PM: Registering ACPI NVS region at dffa8000 (32768 bytes)
[ 0.207927] PM: Registering ACPI NVS region at dffbff00 (196864 bytes)
[ 0.210201] print_constraints: dummy:
[ 0.210300] NET: Registered protocol family 16
[ 0.210417] ACPI: bus type pci registered
[ 0.210593] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.210597] PCI: not using MMCONFIG
[ 0.210598] PCI: Using configuration type 1 for base access
[ 0.211097] bio: create slab at 0
[ 0.211097] ACPI: Added _OSI(Module Device)
[ 0.211097] ACPI: Added _OSI(Processor Device)
[ 0.211097] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.211097] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.213836] ACPI: EC: EC description table is found, configuring boot EC
[ 0.213842] ACPI: EC: Look up EC in DSDT
[ 0.216191] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.223510] ACPI: SSDT 00000000dffc0290 00206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.224042] ACPI: Dynamic OEM Table Load:
[ 0.224045] ACPI: SSDT (null) 00206 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.224185] ACPI: SSDT 00000000dffc0530 007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.224699] ACPI: Dynamic OEM Table Load:
[ 0.224702] ACPI: SSDT (null) 007FB (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.224903] ACPI: SSDT 00000000dffc01c0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.225425] ACPI: Dynamic OEM Table Load:
[ 0.225428] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.225515] ACPI: SSDT 00000000dffc04a0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.226032] ACPI: Dynamic OEM Table Load:
[ 0.226035] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.226341] ACPI: Interpreter enabled
[ 0.226345] ACPI: (supports S0 S3 S4 S5)
[ 0.226368] ACPI: Using IOAPIC for interrupt routing
[ 0.226394] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.227259] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[ 0.241589] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
[ 0.241862] ACPI: No dock devices found.
[ 0.241866] HEST: Table not found.
[ 0.241869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.242106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.242327] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.242330] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.242333] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.242336] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.242338] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfbffffff]
[ 0.242341] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff]
[ 0.242361] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
[ 0.242464] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
[ 0.242612] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
[ 0.242622] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff]
[ 0.242671] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
[ 0.242756] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
[ 0.242772] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f]
[ 0.242796] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f]
[ 0.242803] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f]
[ 0.242830] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.242836] pci 0000:00:03.2: PME# disabled
[ 0.242856] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
[ 0.243005] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
[ 0.243024] pci 0000:00:03.5: reg 10: [mem 0xf7f80000-0xf7ffffff]
[ 0.243152] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
[ 0.243165] pci 0000:00:04.0: reg 10: [mem 0xf7f7f000-0xf7f7ffff]
[ 0.243212] pci 0000:00:04.0: supports D1 D2
[ 0.243214] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243218] pci 0000:00:04.0: PME# disabled
[ 0.243234] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
[ 0.243248] pci 0000:00:04.1: reg 10: [mem 0xf7f7ec00-0xf7f7ecff]
[ 0.243301] pci 0000:00:04.1: supports D1 D2
[ 0.243303] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243307] pci 0000:00:04.1: PME# disabled
[ 0.243349] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
[ 0.243362] pci 0000:00:08.0: reg 10: [mem 0xf7f78000-0xf7f7bfff]
[ 0.243409] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.243413] pci 0000:00:08.0: PME# disabled
[ 0.243426] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
[ 0.243475] pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
[ 0.243488] pci 0000:00:0b.0: reg 10: [io 0xc080-0xc087]
[ 0.243495] pci 0000:00:0b.0: reg 14: [io 0xc000-0xc003]
[ 0.243501] pci 0000:00:0b.0: reg 18: [io 0xbc00-0xbc07]
[ 0.243508] pci 0000:00:0b.0: reg 1c: [io 0xb880-0xb883]
[ 0.243515] pci 0000:00:0b.0: reg 20: [io 0xb800-0xb80f]
[ 0.243521] pci 0000:00:0b.0: reg 24: [mem 0xf7f7c000-0xf7f7dfff]
[ 0.243594] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
[ 0.243765] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243773] pci 0000:00:0c.0: PME# disabled
[ 0.243865] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
[ 0.244036] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244044] pci 0000:00:15.0: PME# disabled
[ 0.244125] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
[ 0.244296] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244304] pci 0000:00:16.0: PME# disabled
[ 0.244405] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.244413] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.244415] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.244418] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.244421] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.244424] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xfbffffff] (subtractive decode)
[ 0.244426] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
[ 0.244586] pci 0000:02:00.0: [10de:0653] type 0 class 0x000300
[ 0.244601] pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.244618] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.244634] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.244645] pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.244657] pci 0000:02:00.0: reg 30: [mem 0xfaf80000-0xfaffffff pref]
[ 0.250009] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.250023] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.250032] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.250047] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.250210] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.250227] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.250255] pci 0000:03:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.250287] pci 0000:03:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.250328] pci 0000:03:00.0: supports D1 D2
[ 0.250330] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.250335] pci 0000:03:00.0: PME# disabled
[ 0.250355] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.250369] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.250383] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.250392] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.250562] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280
[ 0.250582] pci 0000:04:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.250656] pci 0000:04:00.0: supports D1
[ 0.250658] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.250663] pci 0000:04:00.0: PME# disabled
[ 0.256669] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.256690] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.256749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.256837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.256881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.256917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.257070] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.257257] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.257259] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.261769] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.261868] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.261963] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.262062] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.262159] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *15
[ 0.262253] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.262347] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.262441] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.262536] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.262630] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.262725] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.262820] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.262914] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.263008] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.263109] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.263203] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.263299] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.263418] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.263513] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.263607] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.263709] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *10
[ 0.263803] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.263897] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.263991] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.264086] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.264180] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.264275] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.264370] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.264464] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.264559] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.264654] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.264749] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.264846] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.264943] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.265036] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.265134] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
[ 0.265230] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.265328] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.265432] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.265539] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.265651] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.265746] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[ 0.265840] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[ 0.265938] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.266038] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.266134] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.266232] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.266334] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.266430] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.266525] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.266690] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.266694] vgaarb: loaded
[ 0.266695] vgaarb: bridge control possible 0000:02:00.0
[ 0.266802] PCI: Using ACPI for IRQ routing
[ 0.267692] PCI: pci_cache_line_size set to 64 bytes
[ 0.267785] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.267788] reserve RAM buffer: 00000000dffa8000 - 00000000dfffffff
[ 0.267938] NetLabel: Initializing
[ 0.267940] NetLabel: domain hash size = 128
[ 0.267942] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.267958] NetLabel: unlabeled traffic allowed by default
[ 0.267974] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.267981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.267987] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.279999] Switching to clocksource hpet
[ 0.283187] Switched to NOHz mode on CPU #0
[ 0.283293] Switched to NOHz mode on CPU #1
[ 0.287887] pnp: PnP ACPI init
[ 0.287911] ACPI: bus type pnp registered
[ 0.288081] pnp 00:00: [bus 00-ff]
[ 0.288085] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.288087] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.288089] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.288092] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.288094] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.288096] pnp 00:00: [mem 0xe0000000-0xfbffffff window]
[ 0.288099] pnp 00:00: [mem 0xfe000000-0xfebfffff window]
[ 0.288199] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.288230] pnp 00:01: [dma 4]
[ 0.288232] pnp 00:01: [io 0x0000-0x000f]
[ 0.288234] pnp 00:01: [io 0x0081-0x0083]
[ 0.288236] pnp 00:01: [io 0x0087]
[ 0.288238] pnp 00:01: [io 0x0089-0x008b]
[ 0.288240] pnp 00:01: [io 0x008f]
[ 0.288242] pnp 00:01: [io 0x00c0-0x00df]
[ 0.288274] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.288305] pnp 00:02: [io 0x0060]
[ 0.288307] pnp 00:02: [io 0x0064]
[ 0.288320] pnp 00:02: [irq 1]
[ 0.288351] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.288399] pnp 00:03: [irq 12]
[ 0.288426] pnp 00:03: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.288436] pnp 00:04: [io 0x0061]
[ 0.288464] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.288474] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.288480] pnp 00:05: [irq 13]
[ 0.288504] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.288779] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.288782] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.288785] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.288787] pnp 00:06: [io 0x0010-0x001f]
[ 0.288789] pnp 00:06: [io 0x0022-0x003f]
[ 0.288791] pnp 00:06: [io 0x0044-0x004d]
[ 0.288792] pnp 00:06: [io 0x0050-0x005f]
[ 0.288794] pnp 00:06: [io 0x0062-0x0063]
[ 0.288796] pnp 00:06: [io 0x0065-0x006f]
[ 0.288801] pnp 00:06: [io 0x0072-0x007f]
[ 0.288803] pnp 00:06: [io 0x0080]
[ 0.288805] pnp 00:06: [io 0x0084-0x0086]
[ 0.288807] pnp 00:06: [io 0x0088]
[ 0.288809] pnp 00:06: [io 0x008c-0x008e]
[ 0.288811] pnp 00:06: [io 0x0090-0x009f]
[ 0.288813] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.288815] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.288817] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.288819] pnp 00:06: [io 0x0800-0x080f]
[ 0.288821] pnp 00:06: [io 0x4000-0x407f]
[ 0.288823] pnp 00:06: [io 0x4080-0x40ff]
[ 0.288824] pnp 00:06: [io 0x4400-0x447f]
[ 0.288826] pnp 00:06: [io 0x4480-0x44ff]
[ 0.288828] pnp 00:06: [io 0x4800-0x487f]
[ 0.288830] pnp 00:06: [io 0x4880-0x48ff]
[ 0.288833] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.288835] pnp 00:06: [mem 0xfefe2000-0xfefe3fff]
[ 0.288837] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.288839] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.288842] pnp 00:06: [mem 0xfed01000-0xfed01fff]
[ 0.288929] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.288933] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.288936] system 00:06: [io 0x4000-0x407f] has been reserved
[ 0.288938] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.288941] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.288944] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.288946] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.288949] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.288952] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.288955] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.288958] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.288961] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.288964] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.288967] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.288971] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289073] pnp 00:07: [mem 0xfed00000-0xfed00fff]
[ 0.289076] pnp 00:07: [irq 2 disabled]
[ 0.289082] pnp 00:07: [irq 8]
[ 0.289110] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.289134] pnp 00:08: [io 0x0070-0x0071]
[ 0.289161] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.289206] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.289208] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.289210] pnp 00:09: [io 0x0250-0x0253]
[ 0.289212] pnp 00:09: [io 0x0256-0x025f]
[ 0.289261] system 00:09: [io 0x0250-0x0253] has been reserved
[ 0.289264] system 00:09: [io 0x0256-0x025f] has been reserved
[ 0.289267] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.289270] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.289273] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289311] pnp 00:0a: [io 0x0260-0x026f]
[ 0.289354] system 00:0a: [io 0x0260-0x026f] has been reserved
[ 0.289357] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289397] pnp 00:0b: [io 0x5000-0x507f]
[ 0.289400] pnp 00:0b: [io 0x5080-0x50ff]
[ 0.289443] system 00:0b: [io 0x5000-0x507f] has been reserved
[ 0.289445] system 00:0b: [io 0x5080-0x50ff] has been reserved
[ 0.289449] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289503] pnp 00:0c: [mem 0xfc000000-0xfdffffff]
[ 0.289547] system 00:0c: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.289550] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289753] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.289756] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.289759] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.289761] pnp 00:0d: [mem 0x00100000-0xdfffffff]
[ 0.289763] pnp 00:0d: [mem 0xfc000000-0xffffffff]
[ 0.289826] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.289829] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.289832] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.289835] system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.289838] system 00:0d: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.289842] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.290606] pnp: PnP ACPI: found 14 devices
[ 0.290608] ACPI: ACPI bus type pnp unregistered
[ 0.298017] PCI: max bus depth: 1 pci_try_num: 2
[ 0.298088] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.298098] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.298104] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.298114] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.298123] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.298137] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.298142] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.298153] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.298172] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.298183] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.298209] pci 0000:00:09.0: setting latency timer to 64
[ 0.298396] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.298407] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.298416] pci 0000:00:0c.0: setting latency timer to 64
[ 0.298571] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.298577] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.298586] pci 0000:00:15.0: setting latency timer to 64
[ 0.298738] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.298744] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.298753] pci 0000:00:16.0: setting latency timer to 64
[ 0.298759] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.298762] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.298764] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298767] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.298769] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.298772] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.298774] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.298777] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.298779] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298782] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.298784] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.298786] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.298789] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.298791] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.298794] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.298797] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.298799] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.298802] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.298894] NET: Registered protocol family 2
[ 0.299111] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.300551] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.305929] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.306587] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.306591] TCP reno registered
[ 0.306610] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.306705] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.306986] NET: Registered protocol family 1
[ 0.380195] pci 0000:02:00.0: Boot video device
[ 0.380204] PCI: CLS 64 bytes, default 64
[ 0.380283] Unpacking initramfs...
[ 0.412778] Freeing initrd memory: 1972k freed
[ 0.413798] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.413805] Placing 64MB software IO TLB between ffff8800dbfa2000 - ffff8800dffa2000
[ 0.413807] software IO TLB at phys 0xdbfa2000 - 0xdffa2000
[ 0.413827] Simple Boot Flag at 0xef set to 0x1
[ 0.414345] audit: initializing netlink socket (disabled)
[ 0.414361] type=2000 audit(1320785366.413:1): initialized
[ 0.428848] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.458830] VFS: Disk quotas dquot_6.5.2
[ 0.458992] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459199] msgmni has been set to 7913
[ 0.459457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.459501] io scheduler noop registered
[ 0.459503] io scheduler deadline registered
[ 0.459556] io scheduler cfq registered (default)
[ 0.460121] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.460123] vesafb: scrolling: redraw
[ 0.460126] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.461367] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90003100000, using 5632k, total 5632k
[ 0.505152] Console: switching to colour frame buffer device 200x56
[ 0.548705] fb0: VESA VGA frame buffer device
[ 0.548714] intel_idle: MWAIT substates: 0x2220
[ 0.548716] intel_idle: does not run on family 6 model 23
[ 0.548721] ERST: Table is not found!
[ 0.737076] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.740809] i8042: Detected active multiplexing controller, rev 1.1
[ 0.742438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.742473] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.742501] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.742526] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.742553] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.742682] mousedev: PS/2 mouse device common for all mice
[ 0.742764] rtc_cmos 00:08: RTC can wake from S4
[ 0.742974] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.743024] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.743034] cpuidle: using governor ladder
[ 0.743036] cpuidle: using governor menu
[ 0.743321] TCP cubic registered
[ 0.743324] NET: Registered protocol family 17
[ 0.743350] Registering the dns_resolver key type
[ 0.743491] PM: Hibernation image not present or could not be loaded.
[ 0.743500] registered taskstats version 1
[ 0.758039] rtc_cmos 00:08: setting system clock to 2011-11-08 20:49:27 UTC (1320785367)
[ 0.758088] Initializing network drop monitor service
[ 0.759453] Freeing unused kernel memory: 660k freed
[ 0.759658] Write protecting the kernel read-only data: 6144k
[ 0.760295] Freeing unused kernel memory: 136k freed
[ 0.763465] Freeing unused kernel memory: 816k freed
[ 0.780326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.784138] udevd[65]: starting version 173
[ 0.825169] usbcore: registered new interface driver usbfs
[ 0.825203] usbcore: registered new interface driver hub
[ 0.860126] usbcore: registered new device driver usb
[ 0.877693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.877952] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.877970] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.878008] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.878012] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.878089] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.878124] ehci_hcd 0000:00:04.1: debug port 1
[ 0.878133] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.878155] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7f7ec00
[ 0.886929] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.888193] hub 1-0:1.0: USB hub found
[ 0.888200] hub 1-0:1.0: 11 ports detected
[ 0.899183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.899433] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.899441] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 0.899480] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.899484] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.899504] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 0.899549] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf7f7f000
[ 0.913246] SCSI subsystem initialized
[ 0.920730] libata version 3.00 loaded.
[ 0.952203] hub 2-0:1.0: USB hub found
[ 0.952210] hub 2-0:1.0: 11 ports detected
[ 0.952323] ahci 0000:00:0b.0: version 3.0
[ 0.952553] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 0.952560] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 0.952636] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.952707] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 0.952711] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 0.952716] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.953549] scsi0 : ahci
[ 0.953669] scsi1 : ahci
[ 0.953745] scsi2 : ahci
[ 0.954178] scsi3 : ahci
[ 0.954465] scsi4 : ahci
[ 0.955790] scsi5 : ahci
[ 0.955985] ata1: SATA max UDMA/133 abar m8192@0xf7f7c000 port 0xf7f7c100 irq 40
[ 0.955989] ata2: SATA max UDMA/133 abar m8192@0xf7f7c000 port 0xf7f7c180 irq 40
[ 0.955991] ata3: DUMMY
[ 0.955993] ata4: DUMMY
[ 0.955994] ata5: DUMMY
[ 0.955996] ata6: DUMMY
[ 1.193357] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.273355] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.273371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.274495] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.02, max UDMA/100
[ 1.275057] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.275061] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.276018] ata2.00: configured for UDMA/100
[ 1.277278] ata1.00: configured for UDMA/133
[ 1.277481] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.278848] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.02 PQ: 0 ANSI: 5
[ 1.288947] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.289006] sd 0:0:0:0: [sda] Write Protect is off
[ 1.289010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.289034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.291070] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.291075] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.291264] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.349463] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.350032] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.416685] Refined TSC clocksource calibration: 2000.000 MHz.
[ 1.416692] Switching to clocksource tsc
[ 2.323861] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.040023] usb 1-5: new high speed USB device number 4 using ehci_hcd
[ 4.370027] usb 2-2: new low speed USB device number 2 using ohci_hcd
[ 5.010395] udevd[286]: starting version 174
[ 5.861646] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.861658] ACPI: Power Button [PWRB]
[ 5.861714] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.861719] ACPI: Sleep Button [SLPB]
[ 5.861775] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 6.000103] ACPI: Lid Switch [LID]
[ 6.000132] asus_laptop: Asus Laptop Support version 0.42
[ 6.000196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.000204] ACPI: Power Button [PWRF]
[ 6.000278] asus_laptop: BSTS called, 0xff57 returned
[ 6.000292] asus_laptop: K70IO model detected
[ 6.000723] asus_laptop: Backlight controlled by ACPI video driver
[ 6.000788] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 6.001427] Registered led device: asus::mail
[ 6.001458] Registered led device: asus::touchpad
[ 6.016319] ACPI: acpi_idle registered with cpuidle
[ 6.020717] Monitor-Mwait will be used to enter C-1 state
[ 6.020759] Monitor-Mwait will be used to enter C-2 state
[ 6.020784] Monitor-Mwait will be used to enter C-3 state
[ 6.020791] Marking TSC unstable due to TSC halts in idle
[ 6.020831] Switching to clocksource hpet
[ 6.065415] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 6.065443] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[ 6.066941] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.066945] ACPI: Thermal Zone [THRM] (65 C)
[ 6.077332] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.084781] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.084794] ACPI: Battery Slot [BAT0] (battery present)
[ 6.087050] wmi: Mapper loaded
[ 6.171049] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input7
[ 6.171236] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:04.0-2/input0
[ 6.171260] usbcore: registered new interface driver usbhid
[ 6.171263] usbhid: USB HID core driver
[ 6.175150] Linux media interface: v0.10
[ 6.180767] Linux video capture interface: v2.00
[ 6.200893] cfg80211: Calling CRDA to update world regulatory domain
[ 6.241576] Initializing USB Mass Storage driver...
[ 6.241646] usbcore: registered new interface driver usb-storage
[ 6.241648] USB Mass Storage support registered.
[ 6.258669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.258926] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 6.258942] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 6.259012] r8169 0000:03:00.0: setting latency timer to 64
[ 6.259072] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[ 6.259327] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9000390c000, 90:e6:ba:0d:7b:44, XID 18000000 IRQ 41
[ 6.280651] scsi6 : usb-storage 1-1:1.0
[ 6.280955] usbcore: registered new interface driver ums-cypress
[ 6.368342] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.368473] ACPI: AC Adapter [AC0] (on-line)
[ 6.395392] acpi device:0c: registered as cooling_device2
[ 6.395521] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/LNXVIDEO:00/input/input8
[ 6.395758] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.408698] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a116)
[ 6.425493] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input9
[ 6.425644] usbcore: registered new interface driver uvcvideo
[ 6.425646] USB Video Class driver (1.1.1)
[ 6.468329] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 6.468344] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 6.468355] ath9k 0000:04:00.0: setting latency timer to 64
[ 6.490735] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[ 6.490742] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[ 6.490965] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.490970] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 6.490974] hda_intel: Disabling MSI
[ 6.491034] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.517404] ath: EEPROM regdomain: 0x60
[ 6.517407] ath: EEPROM indicates we should expect a direct regpair map
[ 6.517412] ath: Country alpha2 being used: 00
[ 6.517413] ath: Regpair used: 0x60
[ 6.562685] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 6.563018] Registered led device: ath9k-phy0
[ 6.563024] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90003780000, irq=18
[ 6.721190] [drm] Initialized drm 1.1.0 20060810
[ 6.821606] MXM: GUID detected in BIOS
[ 6.821940] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[ 6.821953] nouveau 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[ 6.821960] nouveau 0000:02:00.0: setting latency timer to 64
[ 6.824586] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096980c1)
[ 6.824593] checking generic (f9000000 580000) vs hw (e0000000 10000000)
[ 6.824595] checking generic (f9000000 580000) vs hw (f8000000 2000000)
[ 6.824598] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 6.824632] Console: switching to colour dummy device 80x25
[ 6.834058] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 6.930436] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 6.930441] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 6.930445] [drm] nouveau 0000:02:00.0: Bios version 62.94.91.00
[ 6.930449] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 6.930451] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 6.930454] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01800323 00010034
[ 6.930457] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 02811300 00000028
[ 6.930460] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04822312 00020010
[ 6.930462] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 0000000e 00000000
[ 6.930466] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[ 6.930469] [drm] nouveau 0000:02:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 6.930472] [drm] nouveau 0000:02:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 6.930475] [drm] nouveau 0000:02:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[ 6.930478] [drm] nouveau 0000:02:00.0: 7: 0x00000413: type 0x13 idx 7 tag 0xff
[ 6.930483] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD4F5
[ 6.955855] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD951
[ 6.959229] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE9D9
[ 6.959239] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEAFA
[ 6.960339] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEE22
[ 6.960341] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEE87
[ 6.980353] [drm] nouveau 0000:02:00.0: 0xEE87: Condition still not met after 20ms, skipping following opcodes
[ 6.999397] [drm] nouveau 0000:02:00.0: 4 available performance level(s)
[ 6.999403] [drm] nouveau 0000:02:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 4 voltage 900mV fanspeed 100%
[ 6.999408] [drm] nouveau 0000:02:00.0: 1: core 275MHz shader 550MHz memory 250MHz timing 5 voltage 900mV fanspeed 100%
[ 6.999412] [drm] nouveau 0000:02:00.0: 2: core 400MHz shader 800MHz memory 400MHz timing 6 voltage 900mV fanspeed 100%
[ 6.999417] [drm] nouveau 0000:02:00.0: 3: core 500MHz shader 1250MHz memory 500MHz timing 7 voltage 1050mV fanspeed 100%
[ 6.999444] [drm] nouveau 0000:02:00.0: c: core 275MHz shader 550MHz memory 249MHz voltage 900mV
[ 7.001745] [TTM] Zone kernel: Available graphics memory: 2026730 kiB.
[ 7.001748] [TTM] Initializing pool allocator.
[ 7.001763] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM
[ 7.001771] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 7.001789] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 7.282462] scsi 6:0:0:0: Direct-Access ST96812A S PQ: 0 ANSI: 0
[ 7.283208] sd 6:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 7.284346] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.284351] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.285322] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.285330] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.288319] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.288326] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.307609] sdb: sdb1 sdb2
[ 7.311326] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.311334] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.311341] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.423365] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 7.650125] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input10
[ 7.967147] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 7.967272] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 8.059180] [drm] nouveau 0000:02:00.0: ACPI backlight interface available, not registering our own
[ 8.074102] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.074105] [drm] No driver support for vblank timestamp query.
[ 8.576893] [drm] nouveau 0000:02:00.0: allocated 1600x900 fb: 0x330000, bo ffff8801135dfc00
[ 8.577002] fbcon: nouveaufb (fb0) is primary device
[ 8.876951] Console: switching to colour frame buffer device 170x48
[ 8.878361] fb0: nouveaufb frame buffer device
[ 8.878363] drm: registered panic notifier
[ 8.878372] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0
[ 9.435006] EXT4-fs (sda3): re-mounted. Opts: barrier=0
[ 9.670613] EXT4-fs (sda2): barriers disabled
[ 9.679523] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=0
[ 9.730135] EXT4-fs (sda5): barriers disabled
[ 9.748983] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: barrier=0
[ 13.704641] NET: Registered protocol family 10
[ 16.396077] r8169 0000:03:00.0: eth0: link down
[ 16.396625] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.466132] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.512546] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[ 19.514490] wlan0: authenticated
[ 19.514749] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[ 19.517273] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[ 19.517277] wlan0: associated
[ 19.517955] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.873799] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[ 28.877017] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[ 28.879418] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[ 30.310018] wlan0: no IPv6 routers present
[ 57.434227] fuse init (API version 7.17)
[ 204.963312] usb 2-2: USB disconnect, device number 2
[ 207.963419] usb 2-2: new low speed USB device number 3 using ohci_hcd
[ 208.167253] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input13
[ 208.167731] generic-usb 0003:13EE:0003.0002: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:04.0-2/input0
[ 217.796499] usb 2-2: USB disconnect, device number 3
[ 633.393348] usb 2-2: new low speed USB device number 4 using ohci_hcd
[ 633.597044] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input14
[ 633.597528] generic-usb 0003:13EE:0003.0003: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:04.0-2/input0
[ 759.647227] CE: hpet increased min_delta_ns to 11520 nsec
[ 856.239944] usb 2-2: USB disconnect, device number 4
[ 1016.993304] usb 2-2: new low speed USB device number 5 using ohci_hcd
[ 1017.196932] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input15
[ 1017.197127] generic-usb 0003:13EE:0003.0004: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:04.0-2/input0
[11324.297238] operapluginwrap[1511] general protection ip:7f620e502f80 sp:7fff4a74ce28 error:0 in libgobject-2.0.so.0.3000.1[7f620e4d0000+4d000]
[33588.026793] CE: hpet increased min_delta_ns to 17280 nsec
[80976.137166] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[80976.165113] cfg80211: Calling CRDA to update world regulatory domain
[80979.113561] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[80982.039562] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[80982.042137] wlan0: authenticated
[80982.068721] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[80982.072673] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[80982.072678] wlan0: associated
[80982.073447] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[80992.328601] wlan0: no IPv6 routers present
[95864.925660] device-mapper: uevent: version 1.0.3
[95864.925855] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[96191.678968] cfg80211: Calling CRDA to update world regulatory domain
[96192.696290] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[96192.698304] wlan0: authenticated
[96192.698858] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[96192.701493] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[96192.701499] wlan0: associated
[98070.616221] operapluginwrap[2922] general protection ip:7f2c2ca62f80 sp:7fff7d12c978 error:0 in libgobject-2.0.so.0.3000.1[7f2c2ca30000+4d000]
[101347.209932] usb 2-3: new full speed USB device number 6 using ohci_hcd
[126230.597706] usb 2-3: USB disconnect, device number 6
[128603.661609] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[128603.690304] cfg80211: Calling CRDA to update world regulatory domain
[128605.439548] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[128608.370776] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[128608.374300] wlan0: authenticated
[128608.374685] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[128608.377642] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[128608.377647] wlan0: associated
[128608.378377] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[128618.750496] wlan0: no IPv6 routers present
[171888.256310] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[171888.286053] cfg80211: Calling CRDA to update world regulatory domain
[171889.847972] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[171892.774024] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[171892.776431] wlan0: authenticated
[171892.801134] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[171892.804070] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[171892.804074] wlan0: associated
[171892.804802] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[171903.586208] wlan0: no IPv6 routers present
[173160.755253] operapluginwrap[15056]: segfault at 7fbf21c0904a ip 00007fbf3c685f80 sp 00007fff98f22158 error 4 in libgobject-2.0.so.0.3000.1[7fbf3c653000+4d000]
[207383.886389] cfg80211: Calling CRDA to update world regulatory domain
[207385.089040] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[207385.091004] wlan0: authenticated
[207385.091217] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[207385.096036] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[207385.096045] wlan0: associated
[215465.944495] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[215465.974995] cfg80211: Calling CRDA to update world regulatory domain
[215467.182149] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[215470.108707] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[215470.110657] wlan0: authenticated
[215470.131303] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[215470.133857] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[215470.133863] wlan0: associated
[215470.134539] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[215481.048486] wlan0: no IPv6 routers present
[253923.699986] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[253923.721112] cfg80211: Calling CRDA to update world regulatory domain
[253926.072276] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[253928.987061] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[253928.989032] wlan0: authenticated
[253929.008739] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[253929.011461] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[253929.011466] wlan0: associated
[253929.012225] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[253939.057968] wlan0: no IPv6 routers present
[257179.658553] operapluginwrap[16784]: segfault at 18600591ed2 ip 00007f89545e9f80 sp 00007fff8d36dd18 error 4 in libgobject-2.0.so.0.3000.1[7f89545b7000+4d000]
[263006.573767] usb 2-3: new full speed USB device number 7 using ohci_hcd
[263006.757844] usb 2-3: device descriptor read/all, error -62
[263006.813785] hub 2-0:1.0: unable to enumerate USB device on port 3
[263007.743764] usb 2-3: new full speed USB device number 9 using ohci_hcd
[270468.394096] operapluginwrap[23202]: segfault at 19b2f6ed9b22 ip 00007fd1f3994f80 sp 00007fff1d85e828 error 4 in libgobject-2.0.so.0.3000.1[7fd1f3962000+4d000]
[301970.876985] cfg80211: Calling CRDA to update world regulatory domain
[301972.149486] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[301972.151651] wlan0: authenticated
[301972.170029] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[301972.172634] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[301972.172640] wlan0: associated
[315330.378812] cfg80211: Calling CRDA to update world regulatory domain
[315331.582469] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[315331.584473] wlan0: authenticated
[315331.584813] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[315331.587408] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[315331.587412] wlan0: associated
[319370.087659] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[319370.154804] cfg80211: Calling CRDA to update world regulatory domain
[319372.537039] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[319375.479589] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[319375.482763] wlan0: authenticated
[319375.482997] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[319375.485552] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[319375.485557] wlan0: associated
[319375.486345] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[319386.024763] wlan0: no IPv6 routers present
[323043.004257] operapluginwrap[17679]: segfault at ffffffffff000016 ip 00007f05c7689f80 sp 00007fffb6b27c38 error 4 in libgobject-2.0.so.0.3000.1[7f05c7657000+4d000]
[324586.683196] operapluginwrap[22682] general protection ip:7f0c57022f80 sp:7fff89626998 error:0 in libgobject-2.0.so.0.3000.1[7f0c56ff0000+4d000]
[330269.725790] usb 2-3: USB disconnect, device number 9
[362638.685528] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[362638.716916] cfg80211: Calling CRDA to update world regulatory domain
[362640.178166] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[362643.272100] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[362643.274252] wlan0: authenticated
[362643.295041] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[362643.297780] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[362643.297785] wlan0: associated
[362643.298507] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[362653.647119] wlan0: no IPv6 routers present
[367052.717494] cfg80211: Calling CRDA to update world regulatory domain
[367053.898880] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[367053.900846] wlan0: authenticated
[367053.901229] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[367053.903829] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[367053.903834] wlan0: associated
[368972.527986] WARNING! power/level is deprecated; use power/control instead
[368973.866528] usb 1-1: USB disconnect, device number 2
[368974.276516] usb 2-1: new full speed USB device number 10 using ohci_hcd
[368976.076522] usb 2-1: device descriptor read/64, error -62
[368977.517444] usb 2-1: not running at top speed; connect to a high speed hub
[368977.539399] scsi7 : usb-storage 2-1:1.0
[368978.545493] scsi 7:0:0:0: Direct-Access ST96812A S PQ: 0 ANSI: 0
[368978.556522] sd 7:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[368978.563639] sd 7:0:0:0: [sdb] Write Protect is off
[368978.563646] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[368978.570489] sd 7:0:0:0: [sdb] No Caching mode page present
[368978.570497] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[368978.595467] sd 7:0:0:0: [sdb] No Caching mode page present
[368978.595474] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[368978.684505] sdb: sdb1 sdb2
[368978.717658] sd 7:0:0:0: [sdb] No Caching mode page present
[368978.717666] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[368978.717670] sd 7:0:0:0: [sdb] Attached SCSI disk
[368983.628433] usb 2-1: USB disconnect, device number 10
[375332.506198] cfg80211: Calling CRDA to update world regulatory domain
[375333.691457] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[375333.693433] wlan0: authenticated
[375333.712107] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[375333.714732] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[375333.714739] wlan0: associated
[404574.585494] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[404574.613702] cfg80211: Calling CRDA to update world regulatory domain
[404576.111944] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[404579.036164] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[404579.038117] wlan0: authenticated
[404579.038460] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[404579.041000] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[404579.041004] wlan0: associated
[404579.041721] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[404589.096234] wlan0: no IPv6 routers present
[407486.832814] cfg80211: Calling CRDA to update world regulatory domain
[407488.021895] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[407488.023868] wlan0: authenticated
[407488.042155] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[407488.044766] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[407488.044771] wlan0: associated
[416789.068629] cfg80211: Calling CRDA to update world regulatory domain
[416790.261624] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[416790.263615] wlan0: authenticated
[416790.282139] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[416790.285205] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[416790.285210] wlan0: associated
[472289.110785] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[472289.142681] cfg80211: Calling CRDA to update world regulatory domain
[472290.943361] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[472293.886188] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[472293.888290] wlan0: authenticated
[472293.911082] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[472293.914003] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[472293.914008] wlan0: associated
[472293.914797] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[472304.902801] wlan0: no IPv6 routers present
[515524.442689] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[515524.468254] cfg80211: Calling CRDA to update world regulatory domain
[515526.044808] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[515528.970643] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[515528.978405] wlan0: authenticated
[515528.997246] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[515529.001476] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[515529.001481] wlan0: associated
[515529.002941] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[515539.367831] wlan0: no IPv6 routers present
[523830.012266] operapluginwrap[2306]: segfault at 4ed20e ip 00007f990ebc1f80 sp 00007fff6d3d2448 error 4 in libgobject-2.0.so.0.3000.1[7f990eb8f000+4d000]
[526213.718662] operapluginwrap[2584]: segfault at 324a ip 00007f0f72de7f80 sp 00007fff8667c528 error 4 in libgobject-2.0.so.0.3000.1[7f0f72db5000+4d000]
[529591.027089] usb 2-3: new full speed USB device number 11 using ohci_hcd
[553300.858437] cfg80211: Calling CRDA to update world regulatory domain
[553302.035911] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[553302.037890] wlan0: authenticated
[553302.057524] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[553302.060148] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[553302.060153] wlan0: associated
[556715.897467] usb 2-3: USB disconnect, device number 11
[559548.147897] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[559548.193855] cfg80211: Calling CRDA to update world regulatory domain
[559549.927650] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[559552.846763] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[559552.850805] wlan0: authenticated
[559552.869433] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[559552.871993] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[559552.871997] wlan0: associated
[559552.872780] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[559563.000793] wlan0: no IPv6 routers present
[601592.300959] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[601592.333950] cfg80211: Calling CRDA to update world regulatory domain
[601594.022782] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[601597.019354] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[601597.021957] wlan0: authenticated
[601597.022388] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[601597.024979] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[601597.024984] wlan0: associated
[601597.026307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[601607.756536] wlan0: no IPv6 routers present
[601622.256277] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[647435.798288] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[647435.821757] cfg80211: Calling CRDA to update world regulatory domain
[647437.990892] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[647440.923603] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[647440.925636] wlan0: authenticated
[647440.926044] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[647440.928860] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[647440.928865] wlan0: associated
[647440.929640] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[647451.071955] wlan0: no IPv6 routers present
[686317.940938] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[686317.971211] cfg80211: Calling CRDA to update world regulatory domain
[686319.303687] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[686322.255122] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[686322.257377] wlan0: authenticated
[686322.276193] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[686322.278741] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[686322.278746] wlan0: associated
[686322.279522] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[686332.734752] wlan0: no IPv6 routers present
[689656.589001] operapluginwrap[2955] general protection ip:7f4a60b02f80 sp:7fff50f51b58 error:0 in libgobject-2.0.so.0.3000.1 (deleted)[7f4a60ad0000+4d000]
[700346.733382] usb 2-3: new full speed USB device number 12 using ohci_hcd
[721971.862546] cfg80211: Calling CRDA to update world regulatory domain
[721973.024190] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[721973.026172] wlan0: authenticated
[721973.045241] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[721973.048064] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[721973.048069] wlan0: associated
[729505.297338] usb 2-3: USB disconnect, device number 12
[771728.618511] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[771728.645985] cfg80211: Calling CRDA to update world regulatory domain
[771730.304737] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[771733.269541] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[771733.271493] wlan0: authenticated
[771733.295866] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[771733.302867] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[771733.302871] wlan0: associated
[771733.303657] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[771743.592841] wlan0: no IPv6 routers present
[817818.806612] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[817818.838031] cfg80211: Calling CRDA to update world regulatory domain
[817822.934799] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[817825.950174] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[817825.952148] wlan0: authenticated
[817825.972093] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[817825.974804] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[817825.974808] wlan0: associated
[817825.975573] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[817837.014901] wlan0: no IPv6 routers present
[819955.865140] cfg80211: Calling CRDA to update world regulatory domain
[819957.051280] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[819957.053248] wlan0: authenticated
[819957.053657] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[819957.056262] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[819957.056267] wlan0: associated
[861202.625268] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[861202.661187] cfg80211: Calling CRDA to update world regulatory domain
[861204.070187] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[861207.009550] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[861207.012780] wlan0: authenticated
[861207.013190] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[861207.021650] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[861207.021654] wlan0: associated
[861207.022450] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[861217.330578] wlan0: no IPv6 routers present
[877369.097422] operapluginwrap[29835] general protection ip:7ffa6f399f80 sp:7fff714d1168 error:0 in libgobject-2.0.so.0.3000.2[7ffa6f367000+4d000]
[886334.804993] cfg80211: Calling CRDA to update world regulatory domain
[886335.998104] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[886336.001541] wlan0: authenticated
[886336.001960] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[886336.004579] wlan0: RX ReassocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[886336.004584] wlan0: associated
[921432.470467] skype[1580] trap int3 ip:f62cfe19 sp:f1bfed40 error:0
[924808.747791] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[924808.780812] cfg80211: Calling CRDA to update world regulatory domain
[924810.530879] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[924813.527610] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[924813.529583] wlan0: authenticated
[924813.551051] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[924813.553606] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[924813.553611] wlan0: associated
[924813.554342] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[924824.497572] wlan0: no IPv6 routers present
[928123.424706] operapluginwrap[29896]: segfault at ff64e10a ip 00007f5c821f7f80 sp 00007fffabffbec8 error 4 in libgobject-2.0.so.0.3000.2[7f5c821c5000+4d000]
[938236.814820] operapluginwrap[2390]: segfault at 4744455a ip 00007ff7c4c06f80 sp 00007fff8f0d6ce8 error 4 in libgobject-2.0.so.0.3000.2[7ff7c4bd4000+4d000]
[939359.135920] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[939359.159261] cfg80211: Calling CRDA to update world regulatory domain
[939360.461047] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[939360.476765] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[939360.530163] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[939360.998014] PM: Syncing filesystems ... done.
[939361.022432] PM: Preparing system for mem sleep
[939363.577637] Freezing user space processes ... (elapsed 0.01 seconds) done.
[939363.589532] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[939363.602797] PM: Entering mem sleep
[939363.602847] Suspending console(s) (use no_console_suspend to debug)
[939363.603690] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[939363.608857] [drm] nouveau 0000:02:00.0: Disabling fbcon acceleration...
[939363.608860] [drm] nouveau 0000:02:00.0: Unpinning framebuffer(s)...
[939363.608919] [drm] nouveau 0000:02:00.0: Evicting buffers...
[939363.609250] ehci_hcd 0000:00:04.1: PCI INT B disabled
[939363.616142] ohci_hcd 0000:00:04.0: PCI INT A disabled
[939363.648658] sd 0:0:0:0: [sda] Stopping disk
[939363.885007] [drm] nouveau 0000:02:00.0: Idling channels...
[939363.885284] [drm] nouveau 0000:02:00.0: Suspending GPU objects...
[939364.206125] snd_hda_intel 0000:00:08.0: PCI INT A disabled
[939364.219550] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3
[939366.422690] [drm] nouveau 0000:02:00.0: And we're gone!
[939366.422771] nouveau 0000:02:00.0: PCI INT A disabled
[939366.436132] PM: suspend of devices complete after 2832.755 msecs
[939366.449483] r8169 0000:03:00.0: PME# enabled
[939366.449502] pcieport 0000:00:15.0: wake-up capability enabled by ACPI
[939366.489718] PM: late suspend of devices complete after 53.581 msecs
[939366.489876] ACPI: Preparing to enter system sleep state S3
[939366.497067] PM: Saving platform NVS memory
[939366.497601] Disabling non-boot CPUs ...
[939366.599414] CPU 1 is now offline
[939366.600097] Extended CMOS year: 2000
[939366.600097] ACPI: Low-level resume complete
[939366.600097] PM: Restoring platform NVS memory
[939366.600097] Extended CMOS year: 2000
[939366.600097] Enabling non-boot CPUs ...
[939366.627564] Booting Node 0 Processor 1 APIC 0x1
[939366.627566] smpboot cpu 1: start_ip = 99000
[939366.499112] Calibrating delay loop (skipped) already calibrated this CPU
[939366.648952] NMI watchdog enabled, takes one hw-pmu counter.
[939366.649411] Switched to NOHz mode on CPU #1
[939366.652791] CPU1 is up
[939366.653656] ACPI: Waking up from system sleep state S3
[939366.980937] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[939367.379938] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[939367.379971] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[939367.380003] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[939367.380053] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
[939367.380496] pcieport 0000:00:16.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[939367.380682] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[939367.380761] ath9k 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[939367.381041] PM: early resume of devices complete after 1.477 msecs
[939367.381420] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[939367.381426] ohci_hcd 0000:00:04.0: setting latency timer to 64
[939367.381447] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[939367.381452] ehci_hcd 0000:00:04.1: setting latency timer to 64
[939367.381488] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[939367.381493] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[939367.381498] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[939367.381501] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[939367.381507] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[939367.381512] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[939367.381551] pci 0000:00:09.0: setting latency timer to 64
[939367.381564] ahci 0000:00:0b.0: setting latency timer to 64
[939367.381611] [drm] nouveau 0000:02:00.0: We're back, enabling device...
[939367.381620] nouveau 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[939367.381624] nouveau 0000:02:00.0: setting latency timer to 64
[939367.381630] [drm] nouveau 0000:02:00.0: POSTing device...
[939367.381634] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD4F5
[939367.383099] pcieport 0000:00:15.0: wake-up capability disabled by ACPI
[939367.383106] r8169 0000:03:00.0: PME# disabled
[939367.398014] sd 0:0:0:0: [sda] Starting disk
[939367.407258] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD951
[939367.470753] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE9D9
[939367.470799] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEAFA
[939367.472893] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEE22
[939367.472895] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEE87
[939367.492959] [drm] nouveau 0000:02:00.0: Restoring GPU objects...
[939367.619908] Extended CMOS year: 2000
[939367.638256] [drm] nouveau 0000:02:00.0: Reinitialising engines...
[939367.638796] [drm] nouveau 0000:02:00.0: Restoring mode...
[939367.699551] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[939367.702185] ata2.00: configured for UDMA/100
[939368.286102] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[939368.290102] ata1.00: configured for UDMA/133
[939368.326913] PM: resume of devices complete after 945.567 msecs
[939368.327325] PM: Finishing wakeup.
[939368.327327] Restarting tasks ... done.
[939368.348266] video LNXVIDEO:00: Restoring backlight state
[939368.560108] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[939368.564551] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[939368.583314] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[939368.649367] r8169 0000:03:00.0: eth0: link down
[939368.649938] ADDRCONF(NETDEV_UP): eth0: link is not ready
[939368.718672] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[939371.652307] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[939371.654274] wlan0: authenticated
[939371.673931] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[939371.676509] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[939371.676513] wlan0: associated
[939371.677178] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[939382.069423] wlan0: no IPv6 routers present
[940607.231778] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[940607.255720] cfg80211: Calling CRDA to update world regulatory domain
[940608.210547] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[940608.214777] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[940608.260702] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[940608.599096] PM: Syncing filesystems ... done.
[940608.624794] PM: Preparing system for mem sleep
[940609.631907] Freezing user space processes ... (elapsed 0.01 seconds) done.
[940609.646036] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[940609.659369] PM: Entering mem sleep
[940609.659411] Suspending console(s) (use no_console_suspend to debug)
[940609.660237] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[940609.665477] [drm] nouveau 0000:02:00.0: Disabling fbcon acceleration...
[940609.665481] [drm] nouveau 0000:02:00.0: Unpinning framebuffer(s)...
[940609.665548] [drm] nouveau 0000:02:00.0: Evicting buffers...
[940609.665884] ehci_hcd 0000:00:04.1: PCI INT B disabled
[940609.672677] ohci_hcd 0000:00:04.0: PCI INT A disabled
[940609.709260] sd 0:0:0:0: [sda] Stopping disk
[940609.735197] [drm] nouveau 0000:02:00.0: Idling channels...
[940609.735475] [drm] nouveau 0000:02:00.0: Suspending GPU objects...
[940610.042670] snd_hda_intel 0000:00:08.0: PCI INT A disabled
[940610.056054] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3
[940612.264025] [drm] nouveau 0000:02:00.0: And we're gone!
[940612.264092] nouveau 0000:02:00.0: PCI INT A disabled
[940612.276012] PM: suspend of devices complete after 2616.087 msecs
[940612.289359] r8169 0000:03:00.0: PME# enabled
[940612.289379] pcieport 0000:00:15.0: wake-up capability enabled by ACPI
[940612.329594] PM: late suspend of devices complete after 53.576 msecs
[940612.329748] ACPI: Preparing to enter system sleep state S3
[940612.336955] PM: Saving platform NVS memory
[940612.337508] Disabling non-boot CPUs ...
[940612.442621] CPU 1 is now offline
[940612.443301] Extended CMOS year: 2000
[940612.443301] ACPI: Low-level resume complete
[940612.443301] PM: Restoring platform NVS memory
[940612.443301] Extended CMOS year: 2000
[940612.443301] Enabling non-boot CPUs ...
[940612.469428] Booting Node 0 Processor 1 APIC 0x1
[940612.469430] smpboot cpu 1: start_ip = 99000
[940612.342359] Calibrating delay loop (skipped) already calibrated this CPU
[940612.495671] NMI watchdog enabled, takes one hw-pmu counter.
[940612.495954] Switched to NOHz mode on CPU #1
[940612.499335] CPU1 is up
[940612.500183] ACPI: Waking up from system sleep state S3
[940612.830803] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[940613.229816] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[940613.229849] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[940613.229882] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[940613.229931] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
[940613.230554] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[940613.230634] ath9k 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[940613.230915] PM: early resume of devices complete after 1.472 msecs
[940613.231297] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[940613.231304] ohci_hcd 0000:00:04.0: setting latency timer to 64
[940613.231343] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[940613.231348] ehci_hcd 0000:00:04.1: setting latency timer to 64
[940613.231357] [drm] nouveau 0000:02:00.0: We're back, enabling device...
[940613.231378] pci 0000:00:09.0: setting latency timer to 64
[940613.231416] ahci 0000:00:0b.0: setting latency timer to 64
[940613.231496] pcieport 0000:00:15.0: wake-up capability disabled by ACPI
[940613.231502] r8169 0000:03:00.0: PME# disabled
[940613.233040] nouveau 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[940613.233045] nouveau 0000:02:00.0: setting latency timer to 64
[940613.233049] [drm] nouveau 0000:02:00.0: POSTing device...
[940613.233052] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD4F5
[940613.244473] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[940613.244479] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[940613.244485] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[940613.244489] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[940613.244496] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[940613.244502] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[940613.244576] sd 0:0:0:0: [sda] Starting disk
[940613.258649] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD951
[940613.322162] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE9D9
[940613.322211] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEAFA
[940613.324307] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEE22
[940613.324309] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEE87
[940613.344371] [drm] nouveau 0000:02:00.0: Restoring GPU objects...
[940613.470597] Extended CMOS year: 2000
[940613.489837] [drm] nouveau 0000:02:00.0: Reinitialising engines...
[940613.490386] [drm] nouveau 0000:02:00.0: Restoring mode...
[940613.549328] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[940613.552644] ata2.00: configured for UDMA/100
[940614.189316] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[940614.193271] ata1.00: configured for UDMA/133
[940614.227988] PM: resume of devices complete after 996.764 msecs
[940614.228395] PM: Finishing wakeup.
[940614.228397] Restarting tasks ... done.
[940614.244532] video LNXVIDEO:00: Restoring backlight state
[940614.428509] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[940614.432161] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[940614.450498] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[940614.514705] r8169 0000:03:00.0: eth0: link down
[940614.515331] ADDRCONF(NETDEV_UP): eth0: link is not ready
[940614.568042] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[940617.550659] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[940617.554442] wlan0: authenticated
[940617.576203] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[940617.578737] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[940617.578741] wlan0: associated
[940617.579544] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[940628.349282] wlan0: no IPv6 routers present
[942995.645248] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x0011 0x05)
[942997.648770] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[942997.658378] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943000.006117] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943031.480713] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943031.481984] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943035.856487] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943067.699772] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943067.701020] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943094.474047] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943095.555613] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943096.247006] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943110.054659] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943120.241723] wlan0: deauthenticating from 00:24:b2:8b:82:c4 by local choice (reason=3)
[943120.265478] cfg80211: Calling CRDA to update world regulatory domain
[943121.219675] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[943121.223682] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[943121.268594] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[943121.587221] PM: Syncing filesystems ... done.
[943121.614335] PM: Preparing system for mem sleep
[943121.614486] [drm] nouveau 0000:02:00.0: EvoCh 0 Mthd 0x0080 Data 0x00000000 (0x1011 0x05)
[943122.310995] Freezing user space processes ... (elapsed 0.01 seconds) done.
[943122.322467] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[943122.335777] PM: Entering mem sleep
[943122.335819] Suspending console(s) (use no_console_suspend to debug)
[943122.336625] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[943122.341614] [drm] nouveau 0000:02:00.0: Disabling fbcon acceleration...
[943122.341617] [drm] nouveau 0000:02:00.0: Unpinning framebuffer(s)...
[943122.341685] [drm] nouveau 0000:02:00.0: Evicting buffers...
[943122.341994] ehci_hcd 0000:00:04.1: PCI INT B disabled
[943122.349101] ohci_hcd 0000:00:04.0: PCI INT A disabled
[943122.389170] sd 0:0:0:0: [sda] Stopping disk
[943122.445269] [drm] nouveau 0000:02:00.0: Idling channels...
[943122.445547] [drm] nouveau 0000:02:00.0: Suspending GPU objects...
[943122.829082] snd_hda_intel 0000:00:08.0: PCI INT A disabled
[943122.842461] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3
[943124.972618] [drm] nouveau 0000:02:00.0: And we're gone!
[943124.972685] nouveau 0000:02:00.0: PCI INT A disabled
[943124.985777] PM: suspend of devices complete after 2649.444 msecs
[943124.999108] r8169 0000:03:00.0: PME# enabled
[943124.999127] pcieport 0000:00:15.0: wake-up capability enabled by ACPI
[943125.039342] PM: late suspend of devices complete after 53.560 msecs
[943125.039498] ACPI: Preparing to enter system sleep state S3
[943125.046697] PM: Saving platform NVS memory
[943125.047240] Disabling non-boot CPUs ...
[943125.149038] CPU 1 is now offline
[943125.149718] Extended CMOS year: 2000
[943125.149718] ACPI: Low-level resume complete
[943125.149718] PM: Restoring platform NVS memory
[943125.149718] Extended CMOS year: 2000
[943125.149718] Enabling non-boot CPUs ...
[943125.175922] Booting Node 0 Processor 1 APIC 0x1
[943125.175924] smpboot cpu 1: start_ip = 99000
[943125.048763] Calibrating delay loop (skipped) already calibrated this CPU
[943125.202369] Switched to NOHz mode on CPU #1
[943125.202576] NMI watchdog enabled, takes one hw-pmu counter.
[943125.209074] CPU1 is up
[943125.209929] ACPI: Waking up from system sleep state S3
[943125.540550] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[943125.939565] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[943125.939597] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[943125.939630] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[943125.939680] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
[943125.940303] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[943125.940382] ath9k 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[943125.940662] PM: early resume of devices complete after 1.472 msecs
[943125.941040] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[943125.941046] ohci_hcd 0000:00:04.0: setting latency timer to 64
[943125.941066] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[943125.941071] ehci_hcd 0000:00:04.1: setting latency timer to 64
[943125.941112] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[943125.941117] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[943125.941123] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[943125.941126] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[943125.941133] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[943125.941139] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[943125.941178] pci 0000:00:09.0: setting latency timer to 64
[943125.941225] ahci 0000:00:0b.0: setting latency timer to 64
[943125.941297] [drm] nouveau 0000:02:00.0: We're back, enabling device...
[943125.941330] nouveau 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[943125.941335] nouveau 0000:02:00.0: setting latency timer to 64
[943125.941340] [drm] nouveau 0000:02:00.0: POSTing device...
[943125.941343] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD4F5
[943125.941455] pcieport 0000:00:15.0: wake-up capability disabled by ACPI
[943125.941461] r8169 0000:03:00.0: PME# disabled
[943125.956255] sd 0:0:0:0: [sda] Starting disk
[943125.967104] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD951
[943126.031516] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE9D9
[943126.031558] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEAFA
[943126.033679] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEE22
[943126.033681] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEE87
[943126.053911] [drm] nouveau 0000:02:00.0: Restoring GPU objects...
[943126.197126] Extended CMOS year: 2000
[943126.200081] [drm] nouveau 0000:02:00.0: Reinitialising engines...
[943126.200624] [drm] nouveau 0000:02:00.0: Restoring mode...
[943126.259083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[943126.261685] ata2.00: configured for UDMA/100
[943126.845781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[943126.849742] ata1.00: configured for UDMA/133
[943126.886193] PM: resume of devices complete after 945.226 msecs
[943126.886599] PM: Finishing wakeup.
[943126.886601] Restarting tasks ... done.
[943126.899827] video LNXVIDEO:00: Restoring backlight state
[943127.067836] EXT4-fs (sda3): re-mounted. Opts: barrier=0,commit=0
[943127.071475] EXT4-fs (sda2): re-mounted. Opts: barrier=0,commit=0
[943127.105545] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=0
[943127.169940] r8169 0000:03:00.0: eth0: link down
[943127.170545] ADDRCONF(NETDEV_UP): eth0: link is not ready
[943127.232960] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[943130.176029] wlan0: authenticate with 00:24:b2:8b:82:c4 (try 1)
[943130.178144] wlan0: authenticated
[943130.178352] wlan0: associate with 00:24:b2:8b:82:c4 (try 1)
[943130.180934] wlan0: RX AssocResp from 00:24:b2:8b:82:c4 (capab=0x411 status=0 aid=2)
[943130.180939] wlan0: associated
[943130.181651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[943141.069095] wlan0: no IPv6 routers present