dmesg - kube
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-13-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
[ 0.000000] BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P6T6 WS REVOLUTION, BIOS 0905 12/24/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 16376M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 1GB, type WB
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ bf77b000-bf780000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000
[ 0.000000] 0100000000 - 0440000000 page 2M
[ 0.000000] kernel direct mapping tables up to 440000000 @ 43ffee000-440000000
[ 0.000000] RAMDISK: 35a98000 - 36d44000
[ 0.000000] ACPI: RSDP 00000000000fb390 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00064 (v01 122410 XSDT1856 20101224 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 000F4 (v03 122410 FACP1856 20101224 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0B455 (v01 A1107 A1107001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 122410 APIC1856 20101224 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 122410 OEMMCFG 20101224 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 122410 OEMB1856 20101224 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 122410 OEMHPET 20101224 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 122410 OEMOSFR 20101224 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79acb0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000440000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000440000000
[ 0.000000] NODE_DATA [000000043fffb000 - 000000043fffffff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042f600000-ffff88043d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00440000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000096
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00440000
[ 0.000000] On node 0 totalpages: 4192006
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 46592 pages used for memmap
[ 0.000000] Normal zone: 3361280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
[ 0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043fc00000 s79616 r8192 d22784 u131072
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4131073
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16438128k/17825792k available (6105k kernel code, 1057768k absent, 329896k reserved, 4879k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1216 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3207.233 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.46 BogoMIPS (lpj=12828932)
[ 0.000096] pid_max: default: 32768 minimum: 301
[ 0.001206] Security Framework initialized
[ 0.001260] AppArmor: AppArmor initialized
[ 0.001305] Yama: becoming mindful.
[ 0.002590] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.005899] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007414] Mount-cache hash table entries: 256
[ 0.007564] Initializing cgroup subsys cpuacct
[ 0.007613] Initializing cgroup subsys memory
[ 0.007663] Initializing cgroup subsys devices
[ 0.007708] Initializing cgroup subsys freezer
[ 0.007753] Initializing cgroup subsys net_cls
[ 0.007798] Initializing cgroup subsys blkio
[ 0.007846] Initializing cgroup subsys perf_event
[ 0.007913] CPU: Physical Processor ID: 0
[ 0.007958] CPU: Processor Core ID: 0
[ 0.008004] mce: CPU supports 9 MCE banks
[ 0.008058] CPU0: Thermal monitoring enabled (TM1)
[ 0.008110] using mwait in idle threads.
[ 0.009857] ACPI: Core revision 20110413
[ 0.015486] ftrace: allocating 25656 entries in 101 pages
[ 0.021607] DMAR: Host address width 39
[ 0.021652] DMAR: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.021704] IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.021763] DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.021814] IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.021873] DMAR: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.021920] DMAR: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
[ 0.021966] DMAR: ATSR flags: 0x0
[ 0.022104] IOAPIC id 8 under DRHD base 0xfbffe000 IOMMU 1
[ 0.022150] IOAPIC id 9 under DRHD base 0xfbffe000 IOMMU 1
[ 0.022393] Enabled IRQ remapping in xapic mode
[ 0.022440] Switched APIC routing to physical flat.
[ 0.022929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064361] CPU0: Intel(R) Core(TM) i7 CPU 965 @ 3.20GHz stepping 04
[ 0.169186] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.169362] ... version: 3
[ 0.169405] ... bit width: 48
[ 0.169449] ... generic registers: 4
[ 0.169492] ... value mask: 0000ffffffffffff
[ 0.169538] ... max period: 000000007fffffff
[ 0.169583] ... fixed-purpose events: 3
[ 0.169627] ... event mask: 000000070000000f
[ 0.170032] Booting Node 0, Processors #1
[ 0.170095] smpboot cpu 1: start_ip = 91000
[ 0.281287] #2
[ 0.281319] smpboot cpu 2: start_ip = 91000
[ 0.393088] #3
[ 0.393120] smpboot cpu 3: start_ip = 91000
[ 0.501028] #4
[ 0.501061] smpboot cpu 4: start_ip = 91000
[ 0.608907] #5
[ 0.608939] smpboot cpu 5: start_ip = 91000
[ 0.716793] #6
[ 0.716825] smpboot cpu 6: start_ip = 91000
[ 0.825023] #7
[ 0.825055] smpboot cpu 7: start_ip = 91000
[ 0.932576] Brought up 8 CPUs
[ 0.932620] Total of 8 processors activated (51313.36 BogoMIPS).
[ 0.936369] devtmpfs: initialized
[ 0.936516] PM: Registering ACPI NVS region at bf798000 (278528 bytes)
[ 0.937629] print_constraints: dummy:
[ 0.937693] Time: 3:23:52 Date: 11/19/11
[ 0.937761] NET: Registered protocol family 16
[ 0.937870] Trying to unpack rootfs image as initramfs...
[ 0.937878] ACPI: bus type pci registered
[ 0.937918] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.937920] PCI: not using MMCONFIG
[ 0.937921] PCI: Using configuration type 1 for base access
[ 0.938411] bio: create slab at 0
[ 0.939398] ACPI: EC: Look up EC in DSDT
[ 0.940305] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.004464] ACPI: SSDT 00000000bf798200 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.004873] ACPI: Dynamic OEM Table Load:
[ 1.004972] ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.005158] ACPI: SSDT 00000000bf79a650 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.005487] ACPI: Dynamic OEM Table Load:
[ 1.005586] ACPI: SSDT (null) 00659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.005840] ACPI: Interpreter enabled
[ 1.005884] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.006078] ACPI: Using IOAPIC for interrupt routing
[ 1.006140] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.006941] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.034100] ACPI: No dock devices found.
[ 1.034146] HEST: Table not found.
[ 1.034189] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.034304] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.034462] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.034509] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.034556] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.034614] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.034672] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.034729] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.034797] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[ 1.034876] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.034923] pci 0000:00:00.0: PME# disabled
[ 1.034981] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 1.035059] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.035106] pci 0000:00:01.0: PME# disabled
[ 1.035164] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 1.035242] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.035289] pci 0000:00:03.0: PME# disabled
[ 1.035349] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 1.035427] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.035474] pci 0000:00:07.0: PME# disabled
[ 1.035536] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 1.035625] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 1.035714] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 1.035802] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[ 1.035893] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 1.035973] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 1.036053] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 1.036133] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 1.036212] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 1.036292] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 1.036379] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 1.036444] pci 0000:00:1a.7: reg 10: [mem 0xfbcff000-0xfbcff3ff]
[ 1.036551] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.036599] pci 0000:00:1a.7: PME# disabled
[ 1.036660] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 1.036718] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit]
[ 1.036807] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.036855] pci 0000:00:1b.0: PME# disabled
[ 1.036912] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 1.037002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.037049] pci 0000:00:1c.0: PME# disabled
[ 1.037108] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[ 1.037197] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.037244] pci 0000:00:1c.1: PME# disabled
[ 1.037308] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 1.037388] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 1.037469] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 1.037549] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 1.037629] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 1.037709] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 1.037796] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 1.037858] pci 0000:00:1d.7: reg 10: [mem 0xfbcfe000-0xfbcfe3ff]
[ 1.037965] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.038013] pci 0000:00:1d.7: PME# disabled
[ 1.038071] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 1.038162] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 1.038276] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.038337] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 1.038426] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 1.038485] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
[ 1.038535] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
[ 1.038585] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
[ 1.038635] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
[ 1.038686] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
[ 1.038736] pci 0000:00:1f.2: reg 24: [mem 0xfbcfc000-0xfbcfc7ff]
[ 1.038808] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.038854] pci 0000:00:1f.2: PME# disabled
[ 1.038909] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 1.038965] pci 0000:00:1f.3: reg 10: [mem 0xfbcfd000-0xfbcfd0ff 64bit]
[ 1.039028] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.039117] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.039163] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.039212] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.039273] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.039363] pci 0000:02:00.0: [10de:05b1] type 1 class 0x000604
[ 1.040690] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.040737] pci 0000:02:00.0: PME# disabled
[ 1.048382] pci 0000:00:03.0: PCI bridge to [bus 02-05]
[ 1.048428] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.048478] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.048538] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.048627] pci 0000:03:00.0: [10de:05b1] type 1 class 0x000604
[ 1.048702] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.048749] pci 0000:03:00.0: PME# disabled
[ 1.048805] pci 0000:03:02.0: [10de:05b1] type 1 class 0x000604
[ 1.048879] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 1.048926] pci 0000:03:02.0: PME# disabled
[ 1.048992] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 1.049039] pci 0000:02:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.049088] pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.049148] pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.049226] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 1.049273] pci 0000:03:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.049322] pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.049383] pci 0000:03:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.049461] pci 0000:03:02.0: PCI bridge to [bus 05-05]
[ 1.049508] pci 0000:03:02.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.049557] pci 0000:03:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.049617] pci 0000:03:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.049717] pci 0000:06:00.0: [1002:6718] type 0 class 0x000300
[ 1.049773] pci 0000:06:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.049828] pci 0000:06:00.0: reg 18: [mem 0xfbdc0000-0xfbddffff 64bit]
[ 1.049880] pci 0000:06:00.0: reg 20: [io 0xd000-0xd0ff]
[ 1.049935] pci 0000:06:00.0: reg 30: [mem 0xfbda0000-0xfbdbffff pref]
[ 1.049996] pci 0000:06:00.0: supports D1 D2
[ 1.050055] pci 0000:06:00.1: [1002:aa80] type 0 class 0x000403
[ 1.050111] pci 0000:06:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.050197] pci 0000:06:00.1: supports D1 D2
[ 1.056376] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[ 1.056422] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 1.056469] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.056519] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.056608] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 1.056654] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.056703] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.056764] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.056868] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[ 1.056927] pci 0000:07:00.0: reg 10: [io 0xe800-0xe8ff]
[ 1.056995] pci 0000:07:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 1.057056] pci 0000:07:00.0: reg 20: [mem 0xfaef0000-0xfaefffff 64bit pref]
[ 1.057112] pci 0000:07:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
[ 1.057193] pci 0000:07:00.0: supports D1 D2
[ 1.057236] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.057285] pci 0000:07:00.0: PME# disabled
[ 1.064377] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 1.064426] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.064474] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.064524] pci 0000:00:1c.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[ 1.064634] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 1.064683] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.064732] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.064793] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.064853] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.064911] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.064970] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.065029] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.065089] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.065148] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.065227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.065437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.065524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.065588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 1.065658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.065723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.065787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.065857] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.065903] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.065962] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.073319] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.073694] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.073846] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.074220] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.074593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.074966] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.075339] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.075712] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.076125] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.076184] vgaarb: loaded
[ 1.076225] vgaarb: bridge control possible 0000:06:00.0
[ 1.076383] SCSI subsystem initialized
[ 1.076465] libata version 3.00 loaded.
[ 1.076534] usbcore: registered new interface driver usbfs
[ 1.076584] usbcore: registered new interface driver hub
[ 1.076645] usbcore: registered new device driver usb
[ 1.076741] PCI: Using ACPI for IRQ routing
[ 1.081860] PCI: Discovered peer bus ff
[ 1.081923] pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600
[ 1.081984] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600
[ 1.082043] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600
[ 1.082100] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600
[ 1.082158] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600
[ 1.082214] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600
[ 1.082271] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600
[ 1.082329] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600
[ 1.082385] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600
[ 1.082443] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600
[ 1.082500] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600
[ 1.082558] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600
[ 1.082614] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600
[ 1.082671] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600
[ 1.082727] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600
[ 1.082785] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600
[ 1.082841] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600
[ 1.082899] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600
[ 1.082956] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600
[ 1.083271] PCI: pci_cache_line_size set to 64 bytes
[ 1.083399] reserve RAM buffer: 0000000000096c00 - 000000000009ffff
[ 1.083436] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.083569] NetLabel: Initializing
[ 1.083648] NetLabel: domain hash size = 128
[ 1.083691] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.083742] NetLabel: unlabeled traffic allowed by default
[ 1.083809] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.083859] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.084042] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.104454] Switching to clocksource hpet
[ 1.104712] Switched to NOHz mode on CPU #6
[ 1.108170] AppArmor: AppArmor Filesystem Enabled
[ 1.108232] pnp: PnP ACPI init
[ 1.108282] ACPI: bus type pnp registered
[ 1.108331] Switched to NOHz mode on CPU #0
[ 1.108368] Switched to NOHz mode on CPU #2
[ 1.108376] Switched to NOHz mode on CPU #5
[ 1.108395] Switched to NOHz mode on CPU #4
[ 1.108410] Switched to NOHz mode on CPU #3
[ 1.108418] Switched to NOHz mode on CPU #7
[ 1.108463] Switched to NOHz mode on CPU #1
[ 1.108716] pnp 00:00: [bus 00-ff]
[ 1.108759] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.108802] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.108846] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.108890] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.108935] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 1.108980] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 1.109025] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[ 1.109110] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.109173] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
[ 1.109217] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[ 1.109261] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[ 1.109305] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[ 1.109349] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
[ 1.109393] pnp 00:01: [mem 0xfed10000-0xfed10fff]
[ 1.109476] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.109523] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.109571] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.109618] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.109665] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.109712] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.109759] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.109831] pnp 00:02: [dma 4]
[ 1.109874] pnp 00:02: [io 0x0000-0x000f]
[ 1.109918] pnp 00:02: [io 0x0081-0x0083]
[ 1.111197] pnp 00:02: [io 0x0087]
[ 1.111239] pnp 00:02: [io 0x0089-0x008b]
[ 1.111282] pnp 00:02: [io 0x008f]
[ 1.111325] pnp 00:02: [io 0x00c0-0x00df]
[ 1.111382] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.111434] pnp 00:03: [io 0x0070-0x0071]
[ 1.111485] pnp 00:03: [irq 8]
[ 1.111541] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.111591] pnp 00:04: [io 0x0061]
[ 1.111649] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.111699] pnp 00:05: [io 0x00f0-0x00ff]
[ 1.111746] pnp 00:05: [irq 13]
[ 1.111805] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.111893] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 1.111940] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 1.111985] pnp 00:06: [io 0x0290-0x029f]
[ 1.112061] system 00:06: [io 0x0290-0x029f] has been reserved
[ 1.112108] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.112247] pnp 00:07: [io 0x0010-0x001f]
[ 1.112291] pnp 00:07: [io 0x0022-0x003f]
[ 1.112334] pnp 00:07: [io 0x0044-0x004d]
[ 1.112377] pnp 00:07: [io 0x0050-0x005f]
[ 1.112420] pnp 00:07: [io 0x0062-0x0063]
[ 1.112463] pnp 00:07: [io 0x0065-0x006f]
[ 1.112511] pnp 00:07: [io 0x0072-0x007f]
[ 1.112555] pnp 00:07: [io 0x0080]
[ 1.112597] pnp 00:07: [io 0x0084-0x0086]
[ 1.112640] pnp 00:07: [io 0x0088]
[ 1.112682] pnp 00:07: [io 0x008c-0x008e]
[ 1.112726] pnp 00:07: [io 0x0090-0x009f]
[ 1.112769] pnp 00:07: [io 0x00a2-0x00bf]
[ 1.112812] pnp 00:07: [io 0x00e0-0x00ef]
[ 1.112855] pnp 00:07: [io 0x04d0-0x04d1]
[ 1.112898] pnp 00:07: [io 0x0800-0x087f]
[ 1.112941] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 1.112986] pnp 00:07: [io 0x0500-0x057f]
[ 1.113029] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 1.113073] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 1.113117] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[ 1.113204] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 1.113251] system 00:07: [io 0x0800-0x087f] has been reserved
[ 1.113297] system 00:07: [io 0x0500-0x057f] has been reserved
[ 1.113343] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.113390] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.113437] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.113484] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.113573] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 1.113635] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.113710] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[ 1.113754] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 1.113816] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.113887] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[ 1.113964] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.114011] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.114106] pnp 00:0b: [io 0x0060]
[ 1.114149] pnp 00:0b: [io 0x0064]
[ 1.114193] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 1.114238] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 1.114316] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.114364] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.114411] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.114507] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 1.114585] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.114632] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.114777] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 1.114821] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 1.114866] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 1.114910] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[ 1.114954] pnp 00:0d: [mem 0xfed90000-0xffffffff]
[ 1.115038] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.115086] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 1.115133] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.115181] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.115228] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.115276] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.115404] pnp: PnP ACPI: found 14 devices
[ 1.115447] ACPI: ACPI bus type pnp unregistered
[ 1.120853] PCI: max bus depth: 3 pci_try_num: 4
[ 1.120943] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 1.120991] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.121037] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.121082] pci 0000:00:01.0: bridge window [io disabled]
[ 1.121129] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.121175] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.121224] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 1.121268] pci 0000:03:00.0: bridge window [io disabled]
[ 1.121315] pci 0000:03:00.0: bridge window [mem disabled]
[ 1.121362] pci 0000:03:00.0: bridge window [mem pref disabled]
[ 1.121410] pci 0000:03:02.0: PCI bridge to [bus 05-05]
[ 1.121455] pci 0000:03:02.0: bridge window [io disabled]
[ 1.121502] pci 0000:03:02.0: bridge window [mem disabled]
[ 1.121548] pci 0000:03:02.0: bridge window [mem pref disabled]
[ 1.121597] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 1.121642] pci 0000:02:00.0: bridge window [io disabled]
[ 1.121689] pci 0000:02:00.0: bridge window [mem disabled]
[ 1.121735] pci 0000:02:00.0: bridge window [mem pref disabled]
[ 1.121783] pci 0000:00:03.0: PCI bridge to [bus 02-05]
[ 1.121828] pci 0000:00:03.0: bridge window [io disabled]
[ 1.121875] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.121921] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.121970] pci 0000:00:07.0: PCI bridge to [bus 06-06]
[ 1.122015] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 1.122063] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.122111] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.122172] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
[ 1.122217] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.122265] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.122314] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.122375] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 1.122420] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.122468] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.122517] pci 0000:00:1c.1: bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
[ 1.122578] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 1.122623] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.122670] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.122717] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.122770] pci 0000:00:01.0: setting latency timer to 64
[ 1.122818] pci 0000:00:03.0: setting latency timer to 64
[ 1.122866] pci 0000:02:00.0: setting latency timer to 64
[ 1.122914] pci 0000:03:00.0: setting latency timer to 64
[ 1.122962] pci 0000:03:02.0: setting latency timer to 64
[ 1.123010] pci 0000:00:07.0: setting latency timer to 64
[ 1.123057] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.123111] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.123159] pci 0000:00:1c.0: setting latency timer to 64
[ 1.123212] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.123260] pci 0000:00:1c.1: setting latency timer to 64
[ 1.123308] pci 0000:00:1e.0: setting latency timer to 64
[ 1.123354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.123399] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.123444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.123491] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.123537] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.123583] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.123629] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.123674] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.123720] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.123778] pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
[ 1.123823] pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.123869] pci_bus 0000:08: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.123926] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 1.123972] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.124018] pci_bus 0000:07: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
[ 1.124075] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 1.124120] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 1.124165] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.124211] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.124258] pci_bus 0000:09: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.124304] pci_bus 0000:09: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.124350] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 1.124395] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 1.124466] NET: Registered protocol family 2
[ 1.124792] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.125742] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.127099] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.127302] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.127349] TCP reno registered
[ 1.127407] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.127515] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.127692] NET: Registered protocol family 1
[ 1.222598] Freeing initrd memory: 19120k freed
[ 2.755077] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.755272] pci 0000:06:00.0: Boot video device
[ 2.755337] PCI: CLS 256 bytes, default 64
[ 2.755388] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.755434] Placing 64MB software IO TLB between ffff8800bb77b000 - ffff8800bf77b000
[ 2.755492] software IO TLB at phys 0xbb77b000 - 0xbf77b000
[ 2.755958] audit: initializing netlink socket (disabled)
[ 2.756009] type=2000 audit(1321673033.536:1): initialized
[ 2.787635] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.821361] VFS: Disk quotas dquot_6.5.2
[ 2.822767] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.823241] fuse init (API version 7.16)
[ 2.823341] msgmni has been set to 32143
[ 2.823629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.823706] io scheduler noop registered
[ 2.823750] io scheduler deadline registered
[ 2.823820] io scheduler cfq registered (default)
[ 2.824025] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.824107] pcieport 0000:00:1c.0: irq 66 for MSI/MSI-X
[ 2.824194] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.824269] pcieport 0000:00:1c.1: irq 67 for MSI/MSI-X
[ 2.824434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.824494] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.824566] intel_idle: MWAIT substates: 0x1120
[ 2.824619] intel_idle: v0.4 model 0x1A
[ 2.824661] intel_idle: lapic_timer_reliable_states 0x2
[ 2.824791] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.824851] ACPI: Power Button [PWRB]
[ 2.824917] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.824976] ACPI: Power Button [PWRF]
[ 2.825033] ACPI: acpi_idle yielding to intel_idle
[ 2.825941] ERST: Table is not found!
[ 2.846370] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.059212] Linux agpgart interface v0.103
[ 3.059918] brd: module loaded
[ 3.060266] loop: module loaded
[ 3.060545] Fixed MDIO Bus: probed
[ 3.060599] PPP generic driver version 2.4.2
[ 3.060663] tun: Universal TUN/TAP device driver, 1.6
[ 3.060708] tun: (C) 1999-2004 Max Krasnyansky
[ 3.060796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.060860] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.060922] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.060969] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.061034] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.061113] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.065041] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 3.065097] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcff000
[ 3.078797] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.078916] hub 1-0:1.0: USB hub found
[ 3.078961] hub 1-0:1.0: 6 ports detected
[ 3.079058] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.079113] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.079160] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.079228] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.079301] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.083214] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 3.083269] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfe000
[ 3.098781] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.098897] hub 2-0:1.0: USB hub found
[ 3.098941] hub 2-0:1.0: 6 ports detected
[ 3.099034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.099087] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.099146] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.099196] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.099243] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.099308] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.099390] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 3.099503] hub 3-0:1.0: USB hub found
[ 3.099547] hub 3-0:1.0: 2 ports detected
[ 3.099642] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.099692] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.099738] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.099802] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.099884] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 3.099996] hub 4-0:1.0: USB hub found
[ 3.100040] hub 4-0:1.0: 2 ports detected
[ 3.100128] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.100178] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.100224] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.100288] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.100369] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000cc00
[ 3.100484] hub 5-0:1.0: USB hub found
[ 3.100530] hub 5-0:1.0: 2 ports detected
[ 3.100612] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.100662] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.100709] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.100773] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.100849] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 3.100959] hub 6-0:1.0: USB hub found
[ 3.101003] hub 6-0:1.0: 2 ports detected
[ 3.101086] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.101136] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.101183] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.101248] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.101324] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 3.101435] hub 7-0:1.0: USB hub found
[ 3.101479] hub 7-0:1.0: 2 ports detected
[ 3.101562] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.101612] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.101658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.101721] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.101797] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 3.101909] hub 8-0:1.0: USB hub found
[ 3.101953] hub 8-0:1.0: 2 ports detected
[ 3.102058] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.104846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.104894] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.104999] mousedev: PS/2 mouse device common for all mice
[ 3.105112] rtc_cmos 00:03: RTC can wake from S4
[ 3.105224] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.105289] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.105398] device-mapper: uevent: version 1.0.3
[ 3.105485] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 3.105652] cpuidle: using governor ladder
[ 3.105872] cpuidle: using governor menu
[ 3.105915] EFI Variables Facility v0.08 2004-May-17
[ 3.106108] TCP cubic registered
[ 3.106224] NET: Registered protocol family 10
[ 3.106592] NET: Registered protocol family 17
[ 3.106643] Registering the dns_resolver key type
[ 3.106744] PM: Hibernation image not present or could not be loaded.
[ 3.106817] registered taskstats version 1
[ 3.127865] Magic number: 3:596:361
[ 3.128036] rtc_cmos 00:03: setting system clock to 2011-11-19 03:23:54 UTC (1321673034)
[ 3.132154] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.132204] EDD information not available.
[ 3.133545] Freeing unused kernel memory: 984k freed
[ 3.133684] Write protecting the kernel read-only data: 10240k
[ 3.134597] Freeing unused kernel memory: 20k freed
[ 3.137856] Freeing unused kernel memory: 1396k freed
[ 3.156206] udevd[106]: starting version 173
[ 3.373589] wmi: Mapper loaded
[ 3.606376] usb 8-1: new low speed USB device number 2 using uhci_hcd
[ 3.608422] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.608437] r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.608469] r8169 0000:07:00.0: setting latency timer to 64
[ 3.608524] r8169 0000:07:00.0: irq 68 for MSI/MSI-X
[ 3.608796] r8169 0000:07:00.0: eth0: RTL8168c/8111c at 0xffffc900125c6000, 00:24:8c:4d:17:23, XID 1c4000c0 IRQ 68
[ 3.646167] ahci 0000:00:1f.2: version 3.0
[ 3.646180] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 3.646209] ahci 0000:00:1f.2: irq 69 for MSI/MSI-X
[ 3.646217] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 3.646232] ahci: SSS flag set, parallel bus scan disabled
[ 3.646265] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 3.646267] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems sxs
[ 3.646270] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.690584] scsi0 : ahci
[ 3.690691] scsi1 : ahci
[ 3.690776] scsi2 : ahci
[ 3.690865] scsi3 : ahci
[ 3.690949] scsi4 : ahci
[ 3.691036] scsi5 : ahci
[ 3.691122] ata1: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc100 irq 69
[ 3.691124] ata2: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc180 irq 69
[ 3.691126] ata3: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc200 irq 69
[ 3.691127] ata4: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc280 irq 69
[ 3.691130] ata5: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc300 irq 69
[ 3.691131] ata6: SATA max UDMA/133 abar m2048@0xfbcfc000 port 0xfbcfc380 irq 69
[ 3.754261] Refined TSC clocksource calibration: 3207.266 MHz.
[ 3.754264] Switching to clocksource tsc
[ 4.181862] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.183329] ata1.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 4.183331] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.185278] ata1.00: configured for UDMA/133
[ 4.185393] scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 4.185528] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.185566] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.185622] sd 0:0:0:0: [sda] Write Protect is off
[ 4.185624] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.185647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.213046] sda: unknown partition table
[ 4.214649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.217074] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
[ 4.217229] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[ 4.250075] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3
[ 4.250148] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[ 4.250160] usbcore: registered new interface driver usbhid
[ 4.250161] usbhid: USB HID core driver
[ 4.673486] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.675429] ata2.00: ATA-8: MAXTOR STM31000340AS, MX1A, max UDMA/133
[ 4.675484] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.677800] ata2.00: configured for UDMA/133
[ 4.678021] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM310003 MX1A PQ: 0 ANSI: 5
[ 4.678199] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.678324] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.678521] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.678526] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.678571] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.704512] sdb: unknown partition table
[ 4.704960] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.169064] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.170864] ata3.00: ATA-8: ST31000340AS, SD1A, max UDMA/133
[ 5.170918] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.173112] ata3.00: configured for UDMA/133
[ 5.173327] scsi 2:0:0:0: Direct-Access ATA ST31000340AS SD1A PQ: 0 ANSI: 5
[ 5.173507] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.173631] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.173814] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.173817] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.173862] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.198642] sdc: unknown partition table
[ 5.199146] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.664679] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.666313] ata4.00: ATA-8: MAXTOR STM31000340AS, MX15, max UDMA/133
[ 5.666369] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.668351] ata4.00: configured for UDMA/133
[ 5.668529] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM310003 MX15 PQ: 0 ANSI: 5
[ 5.668688] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 5.668787] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.668844] sd 3:0:0:0: [sdd] Write Protect is off
[ 5.668846] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.668868] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.682423] sdd: unknown partition table
[ 5.682929] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 6.160247] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.160827] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100
[ 6.161669] ata5.00: configured for UDMA/100
[ 6.163124] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5
[ 6.166683] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.166751] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.166941] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.167014] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 6.655820] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.656124] ata6.00: ATA-7: G.SKILL FALCON 128GB SSD, 1370, max UDMA/133
[ 6.656180] ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.656495] ata6.00: configured for UDMA/133
[ 6.656650] scsi 5:0:0:0: Direct-Access ATA G.SKILL FALCON 1 1370 PQ: 0 ANSI: 5
[ 6.656824] sd 5:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 6.656838] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 6.657066] sd 5:0:0:0: [sde] Write Protect is off
[ 6.657067] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 6.657088] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.657499] sde: sde1 sde2 < sde5 >
[ 6.657899] sd 5:0:0:0: [sde] Attached SCSI disk
[ 7.220421] xor: automatically using best checksumming function: generic_sse
[ 7.239290] generic_sse: 12751.000 MB/sec
[ 7.239340] xor: using function: generic_sse (12751.000 MB/sec)
[ 7.241315] device-mapper: dm-raid45: initialized v0.2594b
[ 7.567278] device-mapper: dm-raid45: /dev/sdc is raid disk 0
[ 7.567324] device-mapper: dm-raid45: /dev/sdb is raid disk 1
[ 7.567370] device-mapper: dm-raid45: /dev/sda is raid disk 2
[ 7.567415] device-mapper: dm-raid45: /dev/sdd is raid disk 3
[ 7.567461] device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 80 stripes
[ 7.567462] algorithm "xor_blocks", 4 chunks with 14531MB/s
[ 7.567463] RAID5 (left asymmetric) set with net 3/4 devices
[ 11.154100] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.589130] udevd[524]: starting version 173
[ 12.592800] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.592825] ata6.00: irq_stat 0x40000001
[ 12.592848] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.592853] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.592854] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.592856] ata6.00: status: { DRDY ERR }
[ 12.592858] ata6.00: error: { ABRT }
[ 12.592863] ata6.00: device reported invalid CHS sector 0
[ 12.592869] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.592871] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.592874] Descriptor sense data with sense descriptors (in hex):
[ 12.592875] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.592879] 00 00 00 00
[ 12.592881] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.592884] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0c 1c 88 08 00 3f ff c0 00 00
[ 12.592890] end_request: I/O error, dev sde, sector 203196424
[ 12.592991] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.592994] ata6.00: irq_stat 0x40000001
[ 12.592996] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593000] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593001] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593003] ata6.00: status: { DRDY ERR }
[ 12.593004] ata6.00: error: { ABRT }
[ 12.593007] ata6.00: device reported invalid CHS sector 0
[ 12.593011] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593013] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593016] Descriptor sense data with sense descriptors (in hex):
[ 12.593017] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593022] 00 00 00 00
[ 12.593024] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593026] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0c 5c 87 c8 00 3f ff c0 00 00
[ 12.593032] end_request: I/O error, dev sde, sector 207390664
[ 12.593129] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593131] ata6.00: irq_stat 0x40000001
[ 12.593133] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593137] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593138] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593140] ata6.00: status: { DRDY ERR }
[ 12.593141] ata6.00: error: { ABRT }
[ 12.593144] ata6.00: device reported invalid CHS sector 0
[ 12.593148] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593150] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593152] Descriptor sense data with sense descriptors (in hex):
[ 12.593154] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593158] 00 00 00 00
[ 12.593160] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593162] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0c 9c 87 88 00 3f ff c0 00 00
[ 12.593167] end_request: I/O error, dev sde, sector 211584904
[ 12.593264] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593266] ata6.00: irq_stat 0x40000001
[ 12.593268] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593272] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593273] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593275] ata6.00: status: { DRDY ERR }
[ 12.593277] ata6.00: error: { ABRT }
[ 12.593280] ata6.00: device reported invalid CHS sector 0
[ 12.593283] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593285] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593287] Descriptor sense data with sense descriptors (in hex):
[ 12.593288] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593292] 00 00 00 00
[ 12.593294] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593297] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0c dc 87 48 00 3f ff c0 00 00
[ 12.593302] end_request: I/O error, dev sde, sector 215779144
[ 12.593348] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593349] ata6.00: irq_stat 0x40000001
[ 12.593351] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593354] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593354] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593356] ata6.00: status: { DRDY ERR }
[ 12.593356] ata6.00: error: { ABRT }
[ 12.593359] ata6.00: device reported invalid CHS sector 0
[ 12.593361] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593363] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593364] Descriptor sense data with sense descriptors (in hex):
[ 12.593365] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593368] 00 00 00 00
[ 12.593369] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593371] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0d 1c 87 08 00 3f ff c0 00 00
[ 12.593375] end_request: I/O error, dev sde, sector 219973384
[ 12.593469] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593471] ata6.00: irq_stat 0x40000001
[ 12.593472] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593476] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593477] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593479] ata6.00: status: { DRDY ERR }
[ 12.593480] ata6.00: error: { ABRT }
[ 12.593483] ata6.00: device reported invalid CHS sector 0
[ 12.593487] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593489] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593491] Descriptor sense data with sense descriptors (in hex):
[ 12.593492] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593496] 00 00 00 00
[ 12.593498] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593500] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0d 5c 86 c8 00 3f ff c0 00 00
[ 12.593506] end_request: I/O error, dev sde, sector 224167624
[ 12.593603] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593605] ata6.00: irq_stat 0x40000001
[ 12.593607] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593611] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593613] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593614] ata6.00: status: { DRDY ERR }
[ 12.593616] ata6.00: error: { ABRT }
[ 12.593619] ata6.00: device reported invalid CHS sector 0
[ 12.593622] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593625] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593627] Descriptor sense data with sense descriptors (in hex):
[ 12.593628] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593632] 00 00 00 00
[ 12.593634] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593637] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0d 9c 86 88 00 3f ff c0 00 00
[ 12.593642] end_request: I/O error, dev sde, sector 228361864
[ 12.593737] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593739] ata6.00: irq_stat 0x40000001
[ 12.593741] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593745] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593746] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593748] ata6.00: status: { DRDY ERR }
[ 12.593749] ata6.00: error: { ABRT }
[ 12.593752] ata6.00: device reported invalid CHS sector 0
[ 12.593755] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593757] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593760] Descriptor sense data with sense descriptors (in hex):
[ 12.593761] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593765] 00 00 00 00
[ 12.593767] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593769] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0d dc 86 48 00 3f ff c0 00 00
[ 12.593774] end_request: I/O error, dev sde, sector 232556104
[ 12.593871] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593872] ata6.00: irq_stat 0x40000001
[ 12.593874] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593878] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593879] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593881] ata6.00: status: { DRDY ERR }
[ 12.593882] ata6.00: error: { ABRT }
[ 12.593885] ata6.00: device reported invalid CHS sector 0
[ 12.593889] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593891] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593893] Descriptor sense data with sense descriptors (in hex):
[ 12.593895] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593899] 00 00 00 00
[ 12.593901] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593903] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0e 1c 86 08 00 3f ff c0 00 00
[ 12.593908] end_request: I/O error, dev sde, sector 236750344
[ 12.593957] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.593958] ata6.00: irq_stat 0x40000001
[ 12.593959] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.593962] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.593963] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.593964] ata6.00: status: { DRDY ERR }
[ 12.593965] ata6.00: error: { ABRT }
[ 12.593967] ata6.00: device reported invalid CHS sector 0
[ 12.593969] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.593971] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.593972] Descriptor sense data with sense descriptors (in hex):
[ 12.593973] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.593976] 00 00 00 00
[ 12.593977] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.593979] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0e 5c 85 c8 00 3f ff c0 00 00
[ 12.593983] end_request: I/O error, dev sde, sector 240944584
[ 12.594067] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.594068] ata6.00: irq_stat 0x40000001
[ 12.594069] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.594072] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.594073] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.594074] ata6.00: status: { DRDY ERR }
[ 12.594075] ata6.00: error: { ABRT }
[ 12.594077] ata6.00: device reported invalid CHS sector 0
[ 12.594079] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.594081] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.594082] Descriptor sense data with sense descriptors (in hex):
[ 12.594083] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.594086] 00 00 00 00
[ 12.594087] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.594089] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0e 9c 85 88 00 3f ff c0 00 00
[ 12.594093] end_request: I/O error, dev sde, sector 245138824
[ 12.594183] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 12.594187] ata6.00: irq_stat 0x40000001
[ 12.594188] ata6.00: failed command: DATA SET MANAGEMENT
[ 12.594191] ata6.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
[ 12.594191] res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 12.594193] ata6.00: status: { DRDY ERR }
[ 12.594194] ata6.00: error: { ABRT }
[ 12.594196] ata6.00: device reported invalid CHS sector 0
[ 12.594198] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 12.594200] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 12.594202] Descriptor sense data with sense descriptors (in hex):
[ 12.594202] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.594205] 00 00 00 00
[ 12.594207] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 12.594208] sd 5:0:0:0: [sde] CDB: Write same(16): 93 08 00 00 00 00 0e dc 85 48 00 0b 3a b8 00 00
[ 12.594212] end_request: I/O error, dev sde, sector 249333064
[ 12.594219] Adding 23436284k swap on /dev/sde5. Priority:-1 extents:1 across:23436284k SS
[ 12.612159] EXT4-fs (sde1): re-mounted. Opts: errors=remount-ro
[ 12.654293] device-mapper: multipath: version 1.3.0 loaded
[ 12.758978] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.758980] Disabling lock debugging due to kernel taint
[ 12.759939] EDAC MC: Ver: 2.1.0
[ 12.760501] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
[ 12.760515] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[ 12.760517] EDAC i7core: Driver loaded.
[ 12.774419] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.774469] HDA Intel 0000:00:1b.0: irq 70 for MSI/MSI-X
[ 12.774487] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.789294] [fglrx] Maximum main memory to use for locked dma buffers: 15698 MBytes.
[ 12.789422] [fglrx] vendor: 1002 device: 6718 count: 1
[ 12.789964] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 12.789981] pci 0000:06:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 12.789984] pci 0000:06:00.0: setting latency timer to 64
[ 12.790447] [fglrx] Kernel PAT support is enabled
[ 12.790459] [fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
[ 12.857445] type=1400 audit(1321673044.233:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=840 comm="apparmor_parser"
[ 12.857823] type=1400 audit(1321673044.233:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser"
[ 12.858148] type=1400 audit(1321673044.233:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser"
[ 13.049654] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 13.131968] init: failsafe main process (1189) killed by TERM signal
[ 13.147453] type=1400 audit(1321673044.525:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1303 comm="apparmor_parser"
[ 13.147532] type=1400 audit(1321673044.525:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1299 comm="apparmor_parser"
[ 13.147559] type=1400 audit(1321673044.525:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1302 comm="apparmor_parser"
[ 13.147654] type=1400 audit(1321673044.525:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=1303 comm="apparmor_parser"
[ 13.147764] type=1400 audit(1321673044.525:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1302 comm="apparmor_parser"
[ 13.147825] type=1400 audit(1321673044.525:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1299 comm="apparmor_parser"
[ 13.147983] type=1400 audit(1321673044.525:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1299 comm="apparmor_parser"
[ 13.163339] r8169 0000:07:00.0: eth0: link down
[ 13.163346] r8169 0000:07:00.0: eth0: link down
[ 13.164244] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.175992] hda_codec: AD1989B: BIOS auto-probing.
[ 13.180599] HDA Intel 0000:06:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 13.180687] HDA Intel 0000:06:00.1: irq 71 for MSI/MSI-X
[ 13.180703] HDA Intel 0000:06:00.1: setting latency timer to 64
[ 13.200692] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 13.200772] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:06:00.1/sound/card1/input4
[ 13.343734] init: udev-fallback-graphics main process (1347) terminated with status 1
[ 14.236221] init: apport pre-start process (1400) terminated with status 1
[ 14.240988] init: apport post-stop process (1428) terminated with status 1
[ 14.314596] vboxdrv: Found 8 processor cores.
[ 14.314777] vboxdrv: fAsync=0 offMin=0x20a offMax=0x3abc
[ 14.314821] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 14.314823] vboxdrv: Successfully loaded version 4.1.4 (interface 0x00190000).
[ 14.520027] vboxpci: IOMMU not found (not registered)
[ 14.532898] fglrx_pci 0000:06:00.0: irq 72 for MSI/MSI-X
[ 14.533438] [fglrx] Firegl kernel thread PID: 1499
[ 14.533521] [fglrx] Firegl kernel thread PID: 1500
[ 14.533626] [fglrx] Firegl kernel thread PID: 1501
[ 14.533712] [fglrx] IRQ 72 Enabled
[ 14.602706] EXT4-fs (sde1): re-mounted. Opts: errors=remount-ro,commit=0
[ 14.604444] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
[ 14.729245] [fglrx] Gart USWC size:1279 M.
[ 14.729247] [fglrx] Gart cacheable size:508 M.
[ 14.729250] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.729251] [fglrx] Reserved FB block: Unshared offset:f8ff000, size:401000
[ 14.729253] [fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
[ 14.964309] r8169 0000:07:00.0: eth0: link up
[ 14.965285] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.627404] eth0: no IPv6 routers present
[ 32.371333] EXT4-fs (sde1): re-mounted. Opts: errors=remount-ro,commit=0
[ 32.373365] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0