dmesg - opensuse
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-rc5-1-vanilla (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP Mon Sep 5 07:33:00 UTC 2011 (ca4f769)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc5-1-vanilla root=/dev/disk/by-id/ata-OCZ-VERTEX2_OCZ-561890U87L25E0Z8-part5 resume=/dev/disk/by-id/ata-ST3500418AS_9VM43L0L-part2 splash=silent quiet showopts vga=0x317
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 1303 06/10/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ cfe8d000-cfe90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 22fffe000-230000000
[ 0.000000] RAMDISK: 37487000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb890 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cfe90000 00038 (v01 061009 RSDT1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 061009 FACP1341 20090610 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cfe90440 0E5A8 (v01 A1160 A1160000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0006C (v01 061009 APIC1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90400 0003C (v01 061009 OEMMCFG 20090610 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 061009 OEMB1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cfe9f440 00038 (v01 061009 OEMHPET 20090610 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022ffea000 - 000000022fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096671
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88022fc00000 s76608 r8192 d21696 u524288
[ 0.000000] pcpu-alloc: s76608 r8192 d21696 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065306
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-rc5-1-vanilla root=/dev/disk/by-id/ata-OCZ-VERTEX2_OCZ-561890U87L25E0Z8-part5 resume=/dev/disk/by-id/ata-ST3500418AS_9VM43L0L-part2 splash=silent quiet showopts vga=0x317
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8111968k/9175040k available (5362k kernel code, 788356k absent, 274716k reserved, 6103k data, 896k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3210.790 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.58 BogoMIPS (lpj=12843160)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004047] AppArmor: AppArmor initialized
[ 0.004580] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009584] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010492] Mount-cache hash table entries: 256
[ 0.010574] Initializing cgroup subsys cpuacct
[ 0.010577] Initializing cgroup subsys memory
[ 0.010590] Initializing cgroup subsys devices
[ 0.010591] Initializing cgroup subsys freezer
[ 0.010593] Initializing cgroup subsys net_cls
[ 0.010594] Initializing cgroup subsys blkio
[ 0.010599] Initializing cgroup subsys perf_event
[ 0.010619] tseg: 0000000000
[ 0.010625] CPU: Physical Processor ID: 0
[ 0.010626] CPU: Processor Core ID: 0
[ 0.010627] mce: CPU supports 6 MCE banks
[ 0.010635] using AMD E400 aware idle routine
[ 0.010655] ACPI: Core revision 20110623
[ 0.016337] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057658] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148093] #2
[ 0.148094] smpboot cpu 2: start_ip = 9a000
[ 0.240027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240101] #3 Ok.
[ 0.240102] smpboot cpu 3: start_ip = 9a000
[ 0.332033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332048] Brought up 4 CPUs
[ 0.332050] Total of 4 processors activated (25687.34 BogoMIPS).
[ 0.334306] devtmpfs: initialized
[ 0.334306] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
[ 0.334306] print_constraints: dummy:
[ 0.334306] RTC time: 20:49:00, date: 11/10/11
[ 0.334306] NET: Registered protocol family 16
[ 0.336038] node 0 link 0: io port [1000, ffffff]
[ 0.336041] TOM: 00000000d0000000 aka 3328M
[ 0.336042] Fam 10h mmconf [e0000000, efffffff]
[ 0.336044] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.336046] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.336048] node 0 link 0: mmio [a0000, bffff]
[ 0.336050] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.336052] TOM2: 0000000230000000 aka 8960M
[ 0.336053] bus: [00, 07] on node 0 link 0
[ 0.336055] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.336056] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.336058] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.336059] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.336060] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.336070] Extended Config Space enabled on 1 nodes
[ 0.336125] ACPI: bus type pci registered
[ 0.336166] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.336168] PCI: not using MMCONFIG
[ 0.336169] PCI: Using configuration type 1 for base access
[ 0.336170] PCI: Using configuration type 1 for extended access
[ 0.336305] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.336306] mtrr: probably your BIOS does not setup all CPUs.
[ 0.336307] mtrr: corrected configuration.
[ 0.336691] bio: create slab at 0
[ 0.336691] ACPI: Added _OSI(Module Device)
[ 0.336691] ACPI: Added _OSI(Processor Device)
[ 0.336691] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336691] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.337075] ACPI: EC: Look up EC in DSDT
[ 0.338865] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.432511] ACPI: Interpreter enabled
[ 0.432515] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.432536] ACPI: Using IOAPIC for interrupt routing
[ 0.432556] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.433730] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.549007] ACPI: No dock devices found.
[ 0.549009] HEST: Table not found.
[ 0.549011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.549095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.549261] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.549263] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.549264] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.549266] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.549268] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.549269] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.549281] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.549292] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.549323] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.549348] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.549350] pci 0000:00:02.0: PME# disabled
[ 0.549368] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.549392] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.549394] pci 0000:00:07.0: PME# disabled
[ 0.549423] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.549442] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.549452] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.549461] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.549470] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.549479] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.549489] pci 0000:00:11.0: reg 24: [mem 0xf7dfe400-0xf7dfe7ff]
[ 0.549509] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.549544] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.549557] pci 0000:00:12.0: reg 10: [mem 0xf7df6000-0xf7df6fff]
[ 0.549620] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.549633] pci 0000:00:12.1: reg 10: [mem 0xf7df7000-0xf7df7fff]
[ 0.549702] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.549721] pci 0000:00:12.2: reg 10: [mem 0xf7dfe800-0xf7dfe8ff]
[ 0.549791] pci 0000:00:12.2: supports D1 D2
[ 0.549792] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.549796] pci 0000:00:12.2: PME# disabled
[ 0.549816] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.549829] pci 0000:00:13.0: reg 10: [mem 0xf7dfc000-0xf7dfcfff]
[ 0.549893] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.549906] pci 0000:00:13.1: reg 10: [mem 0xf7dfd000-0xf7dfdfff]
[ 0.549975] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.549994] pci 0000:00:13.2: reg 10: [mem 0xf7dfec00-0xf7dfecff]
[ 0.550064] pci 0000:00:13.2: supports D1 D2
[ 0.550065] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.550069] pci 0000:00:13.2: PME# disabled
[ 0.550092] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.550184] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.550200] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.550209] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.550218] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.550227] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.550236] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.550285] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.550306] pci 0000:00:14.2: reg 10: [mem 0xf7df8000-0xf7dfbfff 64bit]
[ 0.550364] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.550367] pci 0000:00:14.2: PME# disabled
[ 0.550380] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.550454] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.550494] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.550507] pci 0000:00:14.5: reg 10: [mem 0xf7dff000-0xf7dfffff]
[ 0.550573] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.550589] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.550602] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.550616] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.550632] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.550683] pci 0000:03:00.0: [10de:0e22] type 0 class 0x000300
[ 0.550692] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.550703] pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.550713] pci 0000:03:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.550720] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.550727] pci 0000:03:00.0: reg 30: [mem 0xfbf00000-0xfbf7ffff pref]
[ 0.550770] pci 0000:03:00.1: [10de:0beb] type 0 class 0x000403
[ 0.550779] pci 0000:03:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
[ 0.556052] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 0.556056] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.556059] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.556062] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.556115] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
[ 0.556147] pci 0000:02:00.0: reg 10: [mem 0xf7fff800-0xf7ffffff 64bit]
[ 0.556162] pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
[ 0.556263] pci 0000:02:00.0: supports D2
[ 0.556264] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.556270] pci 0000:02:00.0: PME# disabled
[ 0.564056] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.564060] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.564066] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.564104] pci 0000:01:06.0: [10ec:8139] type 0 class 0x000200
[ 0.564126] pci 0000:01:06.0: reg 10: [io 0xc800-0xc8ff]
[ 0.564140] pci 0000:01:06.0: reg 14: [mem 0xf7effc00-0xf7effcff]
[ 0.564216] pci 0000:01:06.0: supports D1 D2
[ 0.564218] pci 0000:01:06.0: PME# supported from D1 D2 D3hot
[ 0.564222] pci 0000:01:06.0: PME# disabled
[ 0.564268] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.564272] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.564275] pci 0000:00:14.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.564279] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.564281] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.564283] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.564284] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.564286] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.564288] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.564300] pci 0000:00:02.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564303] pci 0000:00:02.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564306] pci 0000:03:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.564313] pci 0000:03:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564316] pci 0000:03:00.1: Dev MPS 128 MPSS 128 MRRS 512
[ 0.564323] pci 0000:03:00.1: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564325] pci 0000:00:07.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564328] pci 0000:00:07.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564334] pci 0000:02:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 0.564349] pci 0000:02:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 0.564353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.564579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.564623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.564680] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.564682] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.564684] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.569519] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.569558] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.569594] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.569630] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.569665] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.569701] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.569736] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.569771] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.569810] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.569810] vgaarb: loaded
[ 0.569810] vgaarb: bridge control possible 0000:03:00.0
[ 0.569810] SCSI subsystem initialized
[ 0.569810] libata version 3.00 loaded.
[ 0.569810] PCI: Using ACPI for IRQ routing
[ 0.579076] PCI: pci_cache_line_size set to 64 bytes
[ 0.579081] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.579151] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.579153] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 0.579215] NetLabel: Initializing
[ 0.579216] NetLabel: domain hash size = 128
[ 0.579217] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.579226] NetLabel: unlabeled traffic allowed by default
[ 0.579233] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.579236] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.581064] Switching to clocksource hpet
[ 0.581848] AppArmor: AppArmor Filesystem Enabled
[ 0.581863] pnp: PnP ACPI init
[ 0.581872] ACPI: bus type pnp registered
[ 0.581968] pnp 00:00: [bus 00-ff]
[ 0.581970] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.581972] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.581973] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.581975] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.581977] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.581978] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.581980] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.582009] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.582048] pnp 00:01: [dma 4]
[ 0.582050] pnp 00:01: [io 0x0000-0x000f]
[ 0.582051] pnp 00:01: [io 0x0081-0x0083]
[ 0.582053] pnp 00:01: [io 0x0087]
[ 0.582054] pnp 00:01: [io 0x0089-0x008b]
[ 0.582056] pnp 00:01: [io 0x008f]
[ 0.582057] pnp 00:01: [io 0x00c0-0x00df]
[ 0.582075] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.582084] pnp 00:02: [io 0x0070-0x0071]
[ 0.582091] pnp 00:02: [irq 8]
[ 0.582108] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.582115] pnp 00:03: [io 0x0061]
[ 0.582132] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.582139] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.582142] pnp 00:04: [irq 13]
[ 0.582160] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.582194] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.582212] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.582290] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.582291] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.582329] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.582331] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.582333] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.582470] pnp 00:07: [io 0x0010-0x001f]
[ 0.582472] pnp 00:07: [io 0x0022-0x003f]
[ 0.582473] pnp 00:07: [io 0x0062-0x0063]
[ 0.582474] pnp 00:07: [io 0x0065-0x006f]
[ 0.582476] pnp 00:07: [io 0x0072-0x007f]
[ 0.582477] pnp 00:07: [io 0x0080]
[ 0.582478] pnp 00:07: [io 0x0084-0x0086]
[ 0.582479] pnp 00:07: [io 0x0088]
[ 0.582480] pnp 00:07: [io 0x008c-0x008e]
[ 0.582482] pnp 00:07: [io 0x0090-0x009f]
[ 0.582483] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.582484] pnp 00:07: [io 0x00b1]
[ 0.582485] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.582487] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.582488] pnp 00:07: [io 0x040b]
[ 0.582489] pnp 00:07: [io 0x04d6]
[ 0.582490] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.582491] pnp 00:07: [io 0x0c14]
[ 0.582493] pnp 00:07: [io 0x0c50-0x0c51]
[ 0.582495] pnp 00:07: [io 0x0c52]
[ 0.582496] pnp 00:07: [io 0x0c6c]
[ 0.582497] pnp 00:07: [io 0x0c6f]
[ 0.582498] pnp 00:07: [io 0x0cd0-0x0cd1]
[ 0.582499] pnp 00:07: [io 0x0cd2-0x0cd3]
[ 0.582501] pnp 00:07: [io 0x0cd4-0x0cd5]
[ 0.582502] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.582503] pnp 00:07: [io 0x0cd8-0x0cdf]
[ 0.582504] pnp 00:07: [io 0x0b00-0x0b3f]
[ 0.582506] pnp 00:07: [io 0x0800-0x089f]
[ 0.582507] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.582508] pnp 00:07: [io 0x0b00-0x0b0f]
[ 0.582510] pnp 00:07: [io 0x0b20-0x0b3f]
[ 0.582511] pnp 00:07: [io 0x0900-0x090f]
[ 0.582512] pnp 00:07: [io 0x0910-0x091f]
[ 0.582514] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.582515] pnp 00:07: [io 0x0060-0x005f disabled]
[ 0.582516] pnp 00:07: [io 0x0064-0x0063 disabled]
[ 0.582518] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.582519] pnp 00:07: [mem 0xfec10000-0xfec1001f]
[ 0.582581] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.582582] system 00:07: [io 0x040b] has been reserved
[ 0.582584] system 00:07: [io 0x04d6] has been reserved
[ 0.582586] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.582588] system 00:07: [io 0x0c14] has been reserved
[ 0.582589] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.582591] system 00:07: [io 0x0c52] has been reserved
[ 0.582593] system 00:07: [io 0x0c6c] has been reserved
[ 0.582594] system 00:07: [io 0x0c6f] has been reserved
[ 0.582596] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.582598] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.582600] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.582601] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.582603] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.582605] system 00:07: [io 0x0b00-0x0b3f] has been reserved
[ 0.582607] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.582609] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.582610] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.582612] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.582614] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.582616] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.582618] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.582620] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.582622] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.582775] Switched to NOHz mode on CPU #0
[ 0.582815] Switched to NOHz mode on CPU #2
[ 0.582853] Switched to NOHz mode on CPU #3
[ 0.582880] Switched to NOHz mode on CPU #1
[ 0.583180] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.583184] pnp 00:08: [irq 4]
[ 0.583186] pnp 00:08: [dma 0 disabled]
[ 0.583256] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.583824] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.583825] pnp 00:09: [io 0x03f7]
[ 0.583828] pnp 00:09: [irq 6]
[ 0.583830] pnp 00:09: [dma 2]
[ 0.583868] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.583890] pnp 00:0a: [io 0x0060]
[ 0.583892] pnp 00:0a: [io 0x0064]
[ 0.583895] pnp 00:0a: [irq 1]
[ 0.583920] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.583958] pnp 00:0b: [irq 12]
[ 0.583981] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.584164] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.584166] pnp 00:0c: [io 0x0230-0x023f]
[ 0.584167] pnp 00:0c: [io 0x0290-0x029f]
[ 0.584168] pnp 00:0c: [io 0x0f40-0x0f4f]
[ 0.584170] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.584207] system 00:0c: [io 0x0230-0x023f] has been reserved
[ 0.584209] system 00:0c: [io 0x0290-0x029f] has been reserved
[ 0.584211] system 00:0c: [io 0x0f40-0x0f4f] has been reserved
[ 0.584212] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.584214] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.584246] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.584281] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.584283] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.588172] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.588175] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.588176] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.588178] pnp 00:0e: [mem 0x00100000-0xcfefffff]
[ 0.588179] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.588183] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.588186] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.588188] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.588190] pnp 00:0e: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.588240] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.588243] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.588348] pnp: PnP ACPI: found 15 devices
[ 0.588349] ACPI: ACPI bus type pnp unregistered
[ 0.594864] PCI: max bus depth: 1 pci_try_num: 2
[ 0.594879] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 0.594881] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.594884] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.594887] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.594890] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.594892] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.594894] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.594898] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.594901] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.594905] pci 0000:00:14.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.594921] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.594924] pci 0000:00:02.0: setting latency timer to 64
[ 0.594930] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.594933] pci 0000:00:07.0: setting latency timer to 64
[ 0.594939] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.594940] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.594942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.594944] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.594945] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.594947] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.594948] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.594950] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.594952] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.594953] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.594955] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.594956] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.594958] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.594959] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.594961] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.594962] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.594964] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.594966] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.594967] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.595052] NET: Registered protocol family 2
[ 0.595226] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.596251] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.598175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.598406] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.598407] TCP reno registered
[ 0.598419] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.598463] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.598601] NET: Registered protocol family 1
[ 0.760059] pci 0000:03:00.0: Boot video device
[ 0.760076] PCI: CLS 64 bytes, default 64
[ 0.760114] Unpacking initramfs...
[ 0.904674] Freeing initrd memory: 11684k freed
[ 0.908368] PCI-DMA: Disabling AGP.
[ 0.908437] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.908438] PCI-DMA: using GART IOMMU.
[ 0.908440] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.911808] audit: initializing netlink socket (disabled)
[ 0.911821] type=2000 audit(1320958139.904:1): initialized
[ 0.942886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.973193] VFS: Disk quotas dquot_6.5.2
[ 0.973224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.973489] msgmni has been set to 15995
[ 0.973692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.973721] io scheduler noop registered
[ 0.973723] io scheduler deadline registered
[ 0.973743] io scheduler cfq registered (default)
[ 0.973880] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.973910] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.974001] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.974021] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.974115] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 0.974116] vesafb: scrolling: redraw
[ 0.974117] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.974237] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90011800000, using 1536k, total 1536k
[ 0.980224] Console: switching to colour frame buffer device 128x48
[ 0.986096] fb0: VESA VGA frame buffer device
[ 0.986129] ERST: Table is not found!
[ 0.986130] GHES: HEST is not enabled!
[ 1.006652] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.200670] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.244234] Non-volatile memory driver v1.3
[ 1.244235] Linux agpgart interface v0.103
[ 1.244366] ahci 0000:00:11.0: version 3.0
[ 1.244383] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.244434] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 1.244506] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.244509] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.244900] scsi0 : ahci
[ 1.244981] scsi1 : ahci
[ 1.245027] scsi2 : ahci
[ 1.245074] scsi3 : ahci
[ 1.245155] ata1: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe500 irq 42
[ 1.245158] ata2: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe580 irq 42
[ 1.245160] ata3: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe600 irq 42
[ 1.245163] ata4: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe680 irq 42
[ 1.245246] Fixed MDIO Bus: probed
[ 1.245280] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.245645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.245651] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.245745] mousedev: PS/2 mouse device common for all mice
[ 1.245813] rtc_cmos 00:02: RTC can wake from S4
[ 1.245906] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.245929] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.245940] cpuidle: using governor ladder
[ 1.245942] cpuidle: using governor menu
[ 1.245943] EFI Variables Facility v0.08 2004-May-17
[ 1.246082] TCP cubic registered
[ 1.246145] NET: Registered protocol family 10
[ 1.246447] lib80211: common routines for IEEE802.11 drivers
[ 1.246448] lib80211_crypt: registered algorithm 'NULL'
[ 1.246450] Registering the dns_resolver key type
[ 1.246462] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 1.246569] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3500418AS_9VM43L0L-part2
[ 1.268538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.736043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.736067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.736093] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.736114] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.737144] ata3.00: HPA detected: current 976771055, native 976773168
[ 1.737148] ata3.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 1.737150] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.738364] ata3.00: configured for UDMA/133
[ 1.742449] ata4.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
[ 1.742452] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.742497] ata2.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
[ 1.742499] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.747498] ata1.00: ATA-8: OCZ-VERTEX2, 1.28, max UDMA/133
[ 1.747500] ata1.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.748899] ata4.00: configured for UDMA/133
[ 1.748924] ata2.00: configured for UDMA/133
[ 1.757503] ata1.00: configured for UDMA/133
[ 1.757632] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.28 PQ: 0 ANSI: 5
[ 1.757826] sd 0:0:0:0: [sda] 224674128 512-byte logical blocks: (115 GB/107 GiB)
[ 1.757842] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 1.757919] sd 0:0:0:0: [sda] Write Protect is off
[ 1.757922] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.757951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.757962] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.758064] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 1.758068] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.758070] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.758095] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758139] sd 2:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.758212] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 1.758225] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.758227] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.758242] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758326] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.758391] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.758392] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.758419] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.758736] sda: sda1 < sda5 sda6 > sda3 sda4
[ 1.759049] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.761371] sdb: sdb1
[ 1.761606] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.783895] sdd: sdd1 sdd2 sdd3 sdd4
[ 1.784215] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.804557] sdc: sdc1 sdc2
[ 1.804812] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.908024] Refined TSC clocksource calibration: 3210.938 MHz.
[ 1.908032] Switching to clocksource tsc
[ 2.170396] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.173037] PM: Hibernation image not present or could not be loaded.
[ 2.173051] registered taskstats version 1
[ 2.188341] Magic number: 3:691:851
[ 2.188431] rtc_cmos 00:02: setting system clock to 2011-11-10 20:49:01 UTC (1320958141)
[ 2.189489] Freeing unused kernel memory: 896k freed
[ 2.189652] Write protecting the kernel read-only data: 10240k
[ 2.191408] Freeing unused kernel memory: 764k freed
[ 2.195006] Freeing unused kernel memory: 1588k freed
[ 2.215477] ACPI: acpi_idle registered with cpuidle
[ 2.222289] udev[119]: starting version 166
[ 2.229399] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.229501] ACPI: Power Button [PWRB]
[ 2.229546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.229699] ACPI: Power Button [PWRF]
[ 2.230089] wmi: Mapper loaded
[ 2.242819] usbcore: registered new interface driver usbfs
[ 2.242837] usbcore: registered new interface driver hub
[ 2.245356] usbcore: registered new device driver usb
[ 2.253890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.255614] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.255634] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.255654] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.255663] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.255690] ehci_hcd 0000:00:12.2: debug port 1
[ 2.255710] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7dfe800
[ 2.264048] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.264069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.264071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.264072] usb usb1: Product: EHCI Host Controller
[ 2.264074] usb usb1: Manufacturer: Linux 3.1.0-rc5-1-vanilla ehci_hcd
[ 2.264075] usb usb1: SerialNumber: 0000:00:12.2
[ 2.264213] hub 1-0:1.0: USB hub found
[ 2.264216] hub 1-0:1.0: 6 ports detected
[ 2.264318] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.264342] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.264349] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.264357] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.264376] ehci_hcd 0000:00:13.2: debug port 1
[ 2.264399] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7dfec00
[ 2.280031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.280046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.280048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.280050] usb usb2: Product: EHCI Host Controller
[ 2.280051] usb usb2: Manufacturer: Linux 3.1.0-rc5-1-vanilla ehci_hcd
[ 2.280052] usb usb2: SerialNumber: 0000:00:13.2
[ 2.280130] hub 2-0:1.0: USB hub found
[ 2.280132] hub 2-0:1.0: 6 ports detected
[ 2.281422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.281476] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.281490] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.281497] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.281520] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7df6000
[ 2.331894] [drm] Initialized drm 1.1.0 20060810
[ 2.335003] nouveau 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.335007] nouveau 0000:03:00.0: setting latency timer to 64
[ 2.335860] [drm] nouveau 0000:03:00.0: Detected an NVc0 generation card (0x0c4100a1)
[ 2.335863] checking generic (d5000000 180000) vs hw (d8000000 8000000)
[ 2.335865] checking generic (d5000000 180000) vs hw (d4000000 4000000)
[ 2.335866] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 2.335878] Console: switching to colour dummy device 80x25
[ 2.341200] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
[ 2.444572] [drm] nouveau 0000:03:00.0: ... appears to be valid
[ 2.444574] [drm] nouveau 0000:03:00.0: BIT BIOS found
[ 2.444576] [drm] nouveau 0000:03:00.0: Bios version 70.04.1b.00
[ 2.444579] [drm] nouveau 0000:03:00.0: TMDS table version 2.0
[ 2.444580] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0
[ 2.444583] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02000300 00000000
[ 2.444584] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 01000302 00020030
[ 2.444590] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 04011380 00000000
[ 2.444591] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 08011382 00020030
[ 2.444593] [drm] nouveau 0000:03:00.0: Raw DCB entry 4: 02022362 00020010
[ 2.444596] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4
[ 2.444598] [drm] nouveau 0000:03:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 2.444599] [drm] nouveau 0000:03:00.0: 1: 0x00010130: type 0x30 idx 1 tag 0x51
[ 2.444601] [drm] nouveau 0000:03:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08
[ 2.444605] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0x67DD
[ 2.464613] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0x6EAE
[ 2.474012] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.474013] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.474015] usb usb3: Product: OHCI Host Controller
[ 2.474016] usb usb3: Manufacturer: Linux 3.1.0-rc5-1-vanilla ohci_hcd
[ 2.474018] usb usb3: SerialNumber: 0000:00:12.0
[ 2.481628] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0x8122
[ 2.481630] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0x812C
[ 2.481686] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0x830B
[ 2.481688] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0x8370
[ 2.501532] [drm] nouveau 0000:03:00.0: 0x8370: Condition still not met after 20ms, skipping following opcodes
[ 2.501542] [drm] nouveau 0000:03:00.0: voltage table 0x40 unknown
[ 2.520314] [drm] nouveau 0000:03:00.0: 4 available performance level(s)
[ 2.520317] [drm] nouveau 0000:03:00.0: 0: memory 135MHz core 50MHz shader 101MHz timing 5
[ 2.520319] [drm] nouveau 0000:03:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 10mV timing 4
[ 2.520322] [drm] nouveau 0000:03:00.0: 2: memory 1900MHz core 405MHz shader 810MHz voltage 20mV timing 3
[ 2.520324] [drm] nouveau 0000:03:00.0: 3: memory 1900MHz core 763MHz shader 1526MHz voltage 20mV timing 3
[ 2.522277] hub 3-0:1.0: USB hub found
[ 2.522283] hub 3-0:1.0: 3 ports detected
[ 2.522357] [TTM] Zone kernel: Available graphics memory: 4096426 kiB.
[ 2.522358] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 2.522359] [TTM] Initializing pool allocator.
[ 2.522367] [drm] nouveau 0000:03:00.0: Detected 1024MiB VRAM
[ 2.524477] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.524503] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.524524] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.524547] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7df7000
[ 2.524566] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[ 2.528061] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.528062] [drm] No driver support for vblank timestamp query.
[ 2.713528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.713530] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.713532] usb usb4: Product: OHCI Host Controller
[ 2.713533] usb usb4: Manufacturer: Linux 3.1.0-rc5-1-vanilla ohci_hcd
[ 2.713535] usb usb4: SerialNumber: 0000:00:12.1
[ 2.714554] hub 4-0:1.0: USB hub found
[ 2.714559] hub 4-0:1.0: 3 ports detected
[ 2.715564] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.715577] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.715582] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.715595] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7dfc000
[ 2.769322] [drm] nouveau 0000:03:00.0: allocated 1440x900 fb: 0x1c0000, bo ffff8802202f5800
[ 2.769369] fbcon: nouveaufb (fb0) is primary device
[ 2.816755] Console: switching to colour frame buffer device 180x56
[ 2.822527] fb0: nouveaufb frame buffer device
[ 2.822528] drm: registered panic notifier
[ 2.822532] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
[ 2.824036] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 2.826537] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.826538] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.826540] usb usb5: Product: OHCI Host Controller
[ 2.826541] usb usb5: Manufacturer: Linux 3.1.0-rc5-1-vanilla ohci_hcd
[ 2.826543] usb usb5: SerialNumber: 0000:00:13.0
[ 2.826621] hub 5-0:1.0: USB hub found
[ 2.826626] hub 5-0:1.0: 3 ports detected
[ 2.826719] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.826734] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.826740] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.826754] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7dfd000
[ 2.884042] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.884045] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.884046] usb usb6: Product: OHCI Host Controller
[ 2.884047] usb usb6: Manufacturer: Linux 3.1.0-rc5-1-vanilla ohci_hcd
[ 2.884049] usb usb6: SerialNumber: 0000:00:13.1
[ 2.884121] hub 6-0:1.0: USB hub found
[ 2.884126] hub 6-0:1.0: 3 ports detected
[ 2.884219] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.884233] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.884238] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.884253] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7dff000
[ 2.944022] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.944024] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.944026] usb usb7: Product: OHCI Host Controller
[ 2.944027] usb usb7: Manufacturer: Linux 3.1.0-rc5-1-vanilla ohci_hcd
[ 2.944028] usb usb7: SerialNumber: 0000:00:14.5
[ 2.944098] hub 7-0:1.0: USB hub found
[ 2.944103] hub 7-0:1.0: 2 ports detected
[ 2.957572] usb 2-2: New USB device found, idVendor=0bc2, idProduct=2101
[ 2.957574] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.957576] usb 2-2: Product: FreeAgent Go
[ 2.957577] usb 2-2: Manufacturer: Seagate
[ 2.957578] usb 2-2: SerialNumber: 2GE4NM2S
[ 3.004621] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 3.004624] PM: Marking nosave pages: 00000000cfe90000 - 0000000100000000
[ 3.005088] PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
[ 3.005267] PM: Basic memory bitmaps created
[ 3.027133] PM: Basic memory bitmaps freed
[ 3.083030] PM: Starting manual resume from disk
[ 3.083032] PM: Hibernation image partition 8:34 present
[ 3.083033] PM: Looking for hibernation image.
[ 3.083189] PM: Image not found (code -22)
[ 3.083191] PM: Hibernation image not present or could not be loaded.
[ 3.096835] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.103417] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 4.410509] udev[475]: starting version 166
[ 4.441150] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.441158] firewire_ohci 0000:02:00.0: setting latency timer to 64
[ 4.442275] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.442278] ALSA hda_intel.c:2413 Using LPIB position fix
[ 4.448690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.448720] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.448750] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.448779] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.449442] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.449690] MCE: In-kernel MCE decoding enabled.
[ 4.449934] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 4.451384] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 4.451393] EDAC MC: Ver: 2.1.0
[ 4.451485] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.452389] 8139too 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.453187] 8139too 0000:01:06.0: eth0: RealTek RTL8139 at 0xffffc900117dcc00, 00:e0:7d:d8:25:8d, IRQ 21
[ 4.455423] AMD64 EDAC driver v3.4.0
[ 4.455790] FDC 0 is a post-1991 82077
[ 4.464915] ALSA hda_intel.c:1492 Enable sync_write for stable communication
[ 4.465774] usbcore: registered new interface driver uas
[ 4.467368] Initializing USB Mass Storage driver...
[ 4.467501] scsi4 : usb-storage 2-2:1.0
[ 4.467616] usbcore: registered new interface driver usb-storage
[ 4.467617] USB Mass Storage support registered.
[ 4.478274] hda_codec: ALC1200: BIOS auto-probing.
[ 4.478278] ALSA patch_realtek.c:1207 SKU: Nid=0x1d sku_cfg=0x4015e601
[ 4.478280] ALSA patch_realtek.c:1209 SKU: port_connectivity=0x1
[ 4.478282] ALSA patch_realtek.c:1210 SKU: enable_pcbeep=0x1
[ 4.478283] ALSA patch_realtek.c:1211 SKU: check_sum=0x00000005
[ 4.478284] ALSA patch_realtek.c:1212 SKU: customization=0x000000e6
[ 4.478286] ALSA patch_realtek.c:1213 SKU: external_amp=0x0
[ 4.478287] ALSA patch_realtek.c:1214 SKU: platform_type=0x0
[ 4.478288] ALSA patch_realtek.c:1215 SKU: swap=0x0
[ 4.478290] ALSA patch_realtek.c:1216 SKU: override=0x1
[ 4.478294] ALSA hda_codec.c:4873 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.478296] ALSA hda_codec.c:4877 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.478297] ALSA hda_codec.c:4881 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.478299] ALSA hda_codec.c:4882 mono: mono_out=0x0
[ 4.478300] ALSA hda_codec.c:4885 dig-out=0x11/0x1e
[ 4.478301] ALSA hda_codec.c:4886 inputs:
[ 4.478303] ALSA hda_codec.c:4890 Rear Mic=0x18
[ 4.478305] ALSA hda_codec.c:4890 Front Mic=0x19
[ 4.478306] ALSA hda_codec.c:4890 Line=0x1a
[ 4.478307] ALSA hda_codec.c:4892
[ 4.481184] ALSA patch_realtek.c:1270 realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[ 4.481186] ALSA patch_realtek.c:1286 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[ 4.487141] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.487818] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.488129] EDAC amd64: DRAM ECC disabled.
[ 4.488134] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.488135] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.488136] (Note that use of the override may cause unknown side effects.)
[ 4.488201] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.488223] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 4.488406] snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.488408] hda_intel: Disabling MSI
[ 4.488436] snd_hda_intel 0000:03:00.1: setting latency timer to 64
[ 4.488575] scsi5 : pata_atiixp
[ 4.488616] scsi6 : pata_atiixp
[ 4.489150] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 4.489152] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.490490] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.490551] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.504078] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 4.512038] ALSA hda_intel.c:1454 Enable delay in RIRB handling
[ 4.652835] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
[ 4.652955] ata6.00: HPA detected: current 976771055, native 976773168
[ 4.652960] ata6.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 4.652963] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.668751] ata5.00: configured for UDMA/66
[ 4.668864] ata6.00: configured for UDMA/100
[ 4.671263] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
[ 4.671377] scsi 5:0:0:0: Attached scsi generic sg4 type 5
[ 4.671493] scsi 6:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 4.671587] sd 6:0:0:0: [sde] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 4.671622] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 4.671676] sd 6:0:0:0: [sde] Write Protect is off
[ 4.671678] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.671700] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.678135] sde: sde1 sde2
[ 4.678357] sd 6:0:0:0: [sde] Attached SCSI disk
[ 4.686706] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.686709] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.686789] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.004105] firewire_core: created device fw0: GUID 001e8c0001fa813c, S400
[ 5.196028] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.300023] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.404024] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.464506] scsi 4:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
[ 5.464649] sd 4:0:0:0: Attached scsi generic sg6 type 0
[ 5.465510] sd 4:0:0:0: [sdf] 976773166 512-byte logical blocks: (500 GB/465 GiB)
[ 5.465997] sd 4:0:0:0: [sdf] Write Protect is off
[ 5.466000] sd 4:0:0:0: [sdf] Mode Sense: 1c 00 00 00
[ 5.466509] sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.469375] sdf: sdf1
[ 5.471371] sd 4:0:0:0: [sdf] Attached SCSI disk
[ 5.512025] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.564184] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input6
[ 5.564227] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input7
[ 5.564267] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input8
[ 5.564306] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input9
[ 6.067608] Adding 3911676k swap on /dev/sdc2. Priority:-1 extents:1 across:3911676k
[ 6.386455] device-mapper: uevent: version 1.0.3
[ 6.386539] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
[ 6.472689] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 6.476536] fuse init (API version 7.17)
[ 7.098593] microcode: CPU0: patch_level=0x01000086
[ 7.100041] microcode: CPU1: patch_level=0x01000086
[ 7.101059] microcode: CPU2: patch_level=0x01000086
[ 7.102366] microcode: CPU3: patch_level=0x01000086
[ 7.103316] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 7.106140] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
[ 7.106150] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 7.106151] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 7.113410] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.118758] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.121489] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.244892] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.244894] EDD information not available.
[ 7.832511] [drm] nouveau 0000:03:00.0: illegal object class: 0x30
[ 7.832516] [drm] nouveau 0000:03:00.0: Error creating object: -22 (1/0x00000000)
[ 8.292021] 8139too 0000:01:06.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 8.300825] NET: Registered protocol family 17
[ 8.408387] start_kdeinit (1975): /proc/1975/oom_adj is deprecated, please use /proc/1975/oom_score_adj instead.
[ 9.025385] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
[ 9.028265] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
[ 13.033064] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 13.218585] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 19.264018] eth0: no IPv6 routers present
[ 378.314987] packagekitd[4813]: segfault at 1c88 ip 00007f407f817baa sp 00007f407adaee20 error 4 in libzypp.so.810.2.6[7f407f405000+4cb000]