dmesg - poweredge_R710_cpu
Linux version 2.6.32.27 (root@db-test-1) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Oct 25 11:58:41 CST 2011
Command line: ro root=LABEL=/ rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007f379000 (usable)
BIOS-e820: 000000007f379000 - 000000007f38f000 (reserved)
BIOS-e820: 000000007f38f000 - 000000007f3ce000 (ACPI data)
BIOS-e820: 000000007f3ce000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000002480000000 (usable)
DMI 2.6 present.
last_pfn = 0x2480000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FF00000000 write-back
2 base 0200000000 mask FE00000000 write-back
3 base 0400000000 mask FC00000000 write-back
4 base 0800000000 mask F800000000 write-back
5 base 1000000000 mask F000000000 write-back
6 base 2000000000 mask FC00000000 write-back
7 base 2400000000 mask FF80000000 write-back
8 disabled
9 disabled
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7f379 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007f379000
0000000000 - 0040000000 page 1G
0040000000 - 007f200000 page 2M
007f200000 - 007f379000 page 4k
kernel direct mapping tables up to 7f379000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000002480000000
0100000000 - 2480000000 page 1G
kernel direct mapping tables up to 2480000000 @ a000-b000
RAMDISK: 37d69000 - 37fef449
ACPI: RSDP 00000000000f11a0 00024 (v02 DELL )
ACPI: XSDT 00000000000f12a4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 000000007f3b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 000000007f38f000 03D72 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 000000007f3b6000 00040
ACPI: APIC 000000007f3b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 000000007f3b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000000007f3b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DM__ 000000007f3b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000000007f3b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 000000007f3b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 000000007f3b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 000000007f392ef4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 000000007f393164 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 000000007f392d74 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 000000007f392da4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 000000007f3b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 000000007f3b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 000000007f3b7000 043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 32 -> Node 0
SRAT: PXM 2 -> APIC 0 -> Node 1
SRAT: PXM 1 -> APIC 48 -> Node 0
SRAT: PXM 2 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 0
SRAT: PXM 2 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 0
SRAT: PXM 2 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 0
SRAT: PXM 2 -> APIC 1 -> Node 1
SRAT: PXM 1 -> APIC 49 -> Node 0
SRAT: PXM 2 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 0
SRAT: PXM 2 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 0
SRAT: PXM 2 -> APIC 21 -> Node 1
SRAT: Node 1 PXM 2 0-80000000
SRAT: Node 1 PXM 2 100000000-1280000000
SRAT: Node 0 PXM 1 1280000000-2480000000
NUMA: Allocated memnodemap from a000 - a0c0
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000001280000000-0000002480000000
NODE_DATA [0000001280000000 - 0000001280005fff]
bootmap [0000001280006000 - 0000001280245fff] pages 240
(8 early reservations) ==> bootmem [1280000000 - 2480000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001b91e18] TEXT DATA BSS
#3 [0037d69000 - 0037fef449] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [0001b92000 - 0001b924fd] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000a0c0] MEMNODEMAP
Bootmem setup node 1 0000000000000000-0000001280000000
NODE_DATA [000000000000a0c0 - 00000000000100bf]
bootmap [0000000000100000 - 000000000034ffff] pages 250
(8 early reservations) ==> bootmem [0000000000 - 1280000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001b91e18] TEXT DATA BSS ==> [0001000000 - 0001b91e18]
#3 [0037d69000 - 0037fef449] RAMDISK ==> [0037d69000 - 0037fef449]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0001b92000 - 0001b924fd] BRK ==> [0001b92000 - 0001b924fd]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000a0c0] MEMNODEMAP ==> [000000a000 - 000000a0c0]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea00111fffff] PMD -> [ffff880028600000-ffff880037bfffff] on node 1
[ffffea0011200000-ffffea003fffffff] PMD -> [ffff880038000000-ffff880066dfffff] on node 1
[ffffea0040000000-ffffea0040bfffff] PMD -> [ffff880067000000-ffff880067bfffff] on node 1
[ffffea0040c00000-ffffea007fbfffff] PMD -> [ffff881280400000-ffff8812bf3fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x02480000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
1: 0x00000000 -> 0x000000a0
1: 0x00000100 -> 0x0007f379
1: 0x00100000 -> 0x01280000
0: 0x01280000 -> 0x02480000
On node 0 totalpages: 18874368
Normal zone: 258048 pages used for memmap
Normal zone: 18616320 pages, LIFO batch:31
On node 1 totalpages: 18871065
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3842 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 502705 pages, LIFO batch:31
Normal zone: 250880 pages used for memmap
Normal zone: 18099200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 27 pages/cpu @ffff880028200000 s80088 r8192 d22312 u131072
pcpu-alloc: s80088 r8192 d22312 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 37222067
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 148832864k/153092096k available (3079k kernel code, 2110364k absent, 2148868k reserved, 3247k data, 468k init)
Hierarchical RCU implementation.
NR_IRQS:4352
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2394.295 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.59 BogoMIPS (lpj=2394295)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0x20 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Booting processor 1 APIC 0x0 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/0x0 -> Node 1
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
CPU1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x30 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/0x30 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x10 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/0x10 -> Node 1
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x32 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/0x32 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x12 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/0x12 -> Node 1
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x34 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/0x34 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x14 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/0x14 -> Node 1
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Booting processor 8 APIC 0x21 ip 0x6000
Initializing CPU#8
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/0x21 -> Node 0
CPU8: Thermal monitoring enabled (TM1)
CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#8]: passed.
Booting processor 9 APIC 0x1 ip 0x6000
Initializing CPU#9
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/0x1 -> Node 1
CPU9: Thermal monitoring enabled (TM1)
CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#9]: passed.
Booting processor 10 APIC 0x31 ip 0x6000
Initializing CPU#10
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/0x31 -> Node 0
CPU10: Thermal monitoring enabled (TM1)
CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#10]: passed.
Booting processor 11 APIC 0x11 ip 0x6000
Initializing CPU#11
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 8
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/0x11 -> Node 1
CPU11: Thermal monitoring enabled (TM1)
CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#11]: passed.
Booting processor 12 APIC 0x33 ip 0x6000
Initializing CPU#12
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/0x33 -> Node 0
CPU12: Thermal monitoring enabled (TM1)
CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#12]: passed.
Booting processor 13 APIC 0x13 ip 0x6000
Initializing CPU#13
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/0x13 -> Node 1
CPU13: Thermal monitoring enabled (TM1)
CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#13]: passed.
Booting processor 14 APIC 0x35 ip 0x6000
Initializing CPU#14
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/0x35 -> Node 0
CPU14: Thermal monitoring enabled (TM1)
CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#14]: passed.
Booting processor 15 APIC 0x15 ip 0x6000
Initializing CPU#15
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/0x15 -> Node 1
CPU15: Thermal monitoring enabled (TM1)
CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#15]: passed.
Brought up 16 CPUs
Total of 16 processors activated (76605.92 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 0 (cpu_power = 589) 8 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU1 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 1 (cpu_power = 589) 9 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU2 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 2 (cpu_power = 589) 10 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU3 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 3 (cpu_power = 589) 11 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU4 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 4 (cpu_power = 589) 12 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU5 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 5 (cpu_power = 589) 13 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU6 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 6 (cpu_power = 589) 14 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU7 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 7 (cpu_power = 589) 15 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU8 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 8 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU9 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 9 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU10 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 10 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU11 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 11 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1177)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4711) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU12 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 12 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU13 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 13 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1177) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4711) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU14 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 14 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU15 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 15 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1177) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4711) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xdc40-0xdc5f]
pci 0000:00:1a.1: reg 20 io port: [0xdc60-0xdc7f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xdc80-0xdc9f]
pci 0000:00:1d.1: reg 20 io port: [0xdca0-0xdcbf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ff000-0xdf0ff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xdc10-0xdc17]
pci 0000:00:1f.2: reg 14 io port: [0xdc08-0xdc0b]
pci 0000:00:1f.2: reg 18 io port: [0xdc18-0xdc1f]
pci 0000:00:1f.2: reg 1c io port: [0xdc0c-0xdc0f]
pci 0000:00:1f.2: reg 20 io port: [0xdc20-0xdc2f]
pci 0000:00:1f.2: reg 24 io port: [0xdc30-0xdc3f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xdf1bc000-0xdf1bffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf1c0000-0xdf1fffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf13ffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:04.0: bridge io port: [0xf000-0xffff]
pci 0000:00:04.0: bridge 32bit mmio: [0xdf100000-0xdf1fffff]
pci 0000:04:00.0: reg 10 64bit mmio pref: [0xd5900000-0xd597ffff]
pci 0000:04:00.0: reg 18 io port: [0xecc0-0xecdf]
pci 0000:04:00.0: reg 20 64bit mmio pref: [0xd58f8000-0xd58fbfff]
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 10 64bit mmio pref: [0xd5980000-0xd59fffff]
pci 0000:04:00.1: reg 18 io port: [0xece0-0xecff]
pci 0000:04:00.1: reg 20 64bit mmio pref: [0xd58fc000-0xd58fffff]
pci 0000:04:00.1: PME# supported from D0 D3hot
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:00:05.0: bridge io port: [0xe000-0xefff]
pci 0000:00:05.0: bridge 64bit mmio pref: [0xd5800000-0xd59fffff]
pci 0000:08:03.0: reg 10 32bit mmio pref: [0xd5000000-0xd57fffff]
pci 0000:08:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
pci 0000:08:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
pci 0000:08:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5000000-0xd57fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff could not be reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xd6000000-0xd9ffffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: 0xda000000-0xddffffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
pci 0000:00:04.0: IO window: 0xf000-0xffff
pci 0000:00:04.0: MEM window: 0xdf100000-0xdf1fffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:04:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
pci 0000:00:05.0: IO window: 0xe000-0xefff
pci 0000:00:05.0: MEM window: 0x80000000-0x803fffff
pci 0000:00:05.0: PREFETCH window: 0x000000d5800000-0x000000d59fffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:07
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000d5000000-0x000000d57fffff
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
pci_bus 0000:04: resource 2 pref mem [0xd5800000-0xd59fffff]
pci_bus 0000:08: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:08: resource 2 pref mem [0xd5000000-0xd57fffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:08:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2585k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1320697367.431:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 58 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 59 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 60 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 61 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 62 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:04.0:pcie02: service driver aer loaded
aer 0000:00:05.0:pcie02: service driver aer loaded
aer 0000:00:06.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
aer 0000:00:09.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci-stub: invalid id string ""
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0: no devices on the port
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: no devices on the port
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 468k freed
Write protecting the kernel read-only data: 4368k
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0fe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000dc40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000dc60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dca0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
SCSI subsystem initialized
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
megasas: 0x1000:0x0079:0x1028:0x1f17: bus 3:slot 0:func 0
megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
megaraid_sas 0000:03:00.0: setting latency timer to 64
megasas: FW now in Ready state
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access TOSHIBA MBF2300RC DA07 PQ: 0 ANSI: 6
scsi 0:0:1:0: Direct-Access TOSHIBA MBF2300RC DA07 PQ: 0 ANSI: 6
scsi 0:0:2:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:3:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:4:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:5:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:6:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:7:0: Direct-Access ATA INTEL SSDSA2CW16 0362 PQ: 0 ANSI: 5
scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC H700 2.10 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
scsi 0:2:1:0: Direct-Access DELL PERC H700 2.10 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:1:0: [sdb] 1557135360 512-byte logical blocks: (797 GB/742 GiB)
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
sd 0:2:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <
sdb:
sd 0:2:1:0: [sdb] Attached SCSI disk
sda5 sda6 sda7 >
sd 0:2:0:0: [sda] Attached SCSI disk
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
usb 1-3: new high speed USB device using ehci_hcd and address 2
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xdc10 ctl 0xdc08 bmdma 0xdc20 irq 23
ata2: SATA max UDMA/133 cmd 0xdc18 ctl 0xdc0c bmdma 0xdc28 irq 23
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
usb 1-3.2: new low speed USB device using ehci_hcd and address 3
usb 1-3.2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input0
generic-usb 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-3.2/input0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D150, max UDMA/100
ata1.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D150 PQ: 0 ANSI: 5
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Avocent USB Composite Device-0 as /class/input/input1
generic-usb 0003:0624:0248.0002: input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
input: Avocent USB Composite Device-0 as /class/input/input2
generic-usb 0003:0624:0248.0003: input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
ata2: failed to resume link (SControl 0)
ata2: SATA link down (SStatus 4 SControl 0)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1320697389.993:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input3
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
Intel(R) 10 Gigabit PCI Express Network Driver - version 3.5.14-NAPI
Copyright (c) 1999-2011 Intel Corporation.
ixgbe 0000:04:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
ixgbe 0000:04:00.0: setting latency timer to 64
input: Power Button as /class/input/input4
ACPI: Power Button [PWRF]
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
ixgbe: 0000:04:00.0: ixgbe_check_options: FCoE Offload feature enabled
ixgbe 0000:04:00.0: irq 63 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 64 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 65 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 66 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 67 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 68 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 69 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 70 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 71 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 72 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 73 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 74 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 75 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 76 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 77 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 78 for MSI/MSI-X
ixgbe 0000:04:00.0: irq 79 for MSI/MSI-X
ixgbe 0000:04:00.0: (PCI Express:5.0GT/s:Width x4) 00:1b:21:87:c2:e0
ixgbe 0000:04:00.0: eth0: MAC: 2, PHY: 15, SFP+: 5, PBA No: E68785-003
ixgbe 0000:04:00.0: eth0: Enabled Features: RxQ: 16 TxQ: 16 FdirHash RSS RSC
ixgbe 0000:04:00.0: eth0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ixgbe 0000:04:00.1: setting latency timer to 64
ixgbe: 0000:04:00.1: ixgbe_check_options: FCoE Offload feature enabled
ixgbe 0000:04:00.1: irq 80 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 81 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 82 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 83 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 84 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 85 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 86 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 87 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 88 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 89 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 90 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 91 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 92 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 93 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 94 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 95 for MSI/MSI-X
ixgbe 0000:04:00.1: irq 96 for MSI/MSI-X
ixgbe 0000:04:00.1: (PCI Express:5.0GT/s:Width x4) 00:1b:21:87:c2:e1
ixgbe 0000:04:00.1: eth1: MAC: 2, PHY: 15, SFP+: 6, PBA No: E68785-003
ixgbe 0000:04:00.1: eth1: Enabled Features: RxQ: 16 TxQ: 16 FdirHash RSS RSC
ixgbe 0000:04:00.1: eth1: Intel(R) 10 Gigabit Network Connection
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
scsi 0:0:32:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sd 0:2:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 78:2b:cb:58:8f:c2
bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 78:2b:cb:58:8f:c4
bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 78:2b:cb:58:8f:c6
bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth5: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 78:2b:cb:58:8f:c8
floppy0: no floppy controllers found
lp: driver loaded but no devices found
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 4192924k swap on /dev/sda6. Priority:-1 extents:1 across:4192924k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: MII link monitoring set to 100 ms
ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth4.
bnx2 0000:02:00.0: irq 97 for MSI/MSI-X
bnx2 0000:02:00.0: irq 98 for MSI/MSI-X
bnx2 0000:02:00.0: irq 99 for MSI/MSI-X
bnx2 0000:02:00.0: irq 100 for MSI/MSI-X
bnx2 0000:02:00.0: irq 101 for MSI/MSI-X
bnx2 0000:02:00.0: irq 102 for MSI/MSI-X
bnx2 0000:02:00.0: irq 103 for MSI/MSI-X
bnx2 0000:02:00.0: irq 104 for MSI/MSI-X
bnx2 0000:02:00.0: irq 105 for MSI/MSI-X
bnx2: eth4: using MSIX
bonding: bond0: enslaving eth4 as a backup interface with a down link.
bonding: bond0: Adding slave eth5.
bnx2 0000:02:00.1: irq 106 for MSI/MSI-X
bnx2 0000:02:00.1: irq 107 for MSI/MSI-X
bnx2 0000:02:00.1: irq 108 for MSI/MSI-X
bnx2 0000:02:00.1: irq 109 for MSI/MSI-X
bnx2 0000:02:00.1: irq 110 for MSI/MSI-X
bnx2 0000:02:00.1: irq 111 for MSI/MSI-X
bnx2 0000:02:00.1: irq 112 for MSI/MSI-X
bnx2 0000:02:00.1: irq 113 for MSI/MSI-X
bnx2 0000:02:00.1: irq 114 for MSI/MSI-X
bnx2: eth5: using MSIX
bonding: bond0: enslaving eth5 as a backup interface with a down link.
bnx2: eth4 NIC Copper Link is Up, 1000 Mbps full duplex
bonding: bond0: link status definitely up for interface eth4.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2: eth5 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_UP): eth0: link is not ready
bonding: bond0: link status definitely up for interface eth5.
ixgbe 0000:04:00.0: eth0: detected SFP+: 5
bnx2 0000:01:00.0: irq 115 for MSI/MSI-X
bnx2 0000:01:00.0: irq 116 for MSI/MSI-X
bnx2 0000:01:00.0: irq 117 for MSI/MSI-X
bnx2 0000:01:00.0: irq 118 for MSI/MSI-X
bnx2 0000:01:00.0: irq 119 for MSI/MSI-X
bnx2 0000:01:00.0: irq 120 for MSI/MSI-X
bnx2 0000:01:00.0: irq 121 for MSI/MSI-X
bnx2 0000:01:00.0: irq 122 for MSI/MSI-X
bnx2 0000:01:00.0: irq 123 for MSI/MSI-X
bnx2: eth2: using MSIX
ADDRCONF(NETDEV_UP): eth2: link is not ready
bnx2: eth2 NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
bond0: no IPv6 routers present
eth2: no IPv6 routers present
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
usb 1-3.2: USB disconnect, address 3
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.