dmesg - apache_benchmark

Return To apache_benchmark System Information

8: assigned [mem 0x40600000-0x407fffff]
pci 0000:00:19.0: BAR 9: assigned [mem 0x40800000-0x409fffff pref]
pci 0000:00:1a.0: BAR 8: assigned [mem 0x40a00000-0x40bfffff]
pci 0000:00:1a.0: BAR 9: assigned [mem 0x40c00000-0x40dfffff pref]
pci 0000:00:18.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:19.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1a.0: BAR 7: assigned [io  0x3000-0x3fff]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:01:00.0:   bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:01:00.0:   bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 01-02]
pci 0000:00:17.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:17.0:   bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:17.0:   bridge window [mem 0x40000000-0x401fffff pref]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0:   bridge window [io  disabled]
pci 0000:03:00.0:   bridge window [mem disabled]
pci 0000:03:00.0:   bridge window [mem pref disabled]
pci 0000:00:18.0: PCI bridge to [bus 03-04]
pci 0000:00:18.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:18.0:   bridge window [mem 0x40200000-0x403fffff]
pci 0000:00:18.0:   bridge window [mem 0x40400000-0x405fffff pref]
pci 0000:00:19.0: PCI bridge to [bus 05-05]
pci 0000:00:19.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:19.0:   bridge window [mem 0x40600000-0x407fffff]
pci 0000:00:19.0:   bridge window [mem 0x40800000-0x409fffff pref]
pci 0000:00:1a.0: PCI bridge to [bus 06-06]
pci 0000:00:1a.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1a.0:   bridge window [mem 0x40a00000-0x40bfffff]
pci 0000:00:1a.0:   bridge window [mem 0x40c00000-0x40dfffff pref]
pci 0000:00:17.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:17.0: setting latency timer to 64
pci 0000:01:00.0: enabling device (0005 -> 0007)
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
pci 0000:00:18.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:18.0: setting latency timer to 64
pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: setting latency timer to 64
pci 0000:00:19.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:19.0: setting latency timer to 64
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:01: resource 2 [mem 0x40000000-0x401fffff pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff pref]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0x40600000-0x407fffff]
pci_bus 0000:05: resource 2 [mem 0x40800000-0x409fffff pref]
pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0x40a00000-0x40bfffff]
pci_bus 0000:06: resource 2 [mem 0x40c00000-0x40dfffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x20661, pf=0x2, revision=0x104
microcode: CPU1 sig=0x20661, pf=0x2, revision=0x104
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1318473232.795:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Registering unionfs 2.5.4 (for 2.6.34-rc0)
Btrfs loaded
msgmni has been set to 1729
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
LTT : ltt-relay init
pcieport 0000:00:17.0: setting latency timer to 64
pcieport 0000:00:18.0: setting latency timer to 64
pcieport 0000:00:19.0: setting latency timer to 64
pcieport 0000:00:1a.0: setting latency timer to 64
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Error: Could not enable PowerButton event (20100121/evxfevnt-193)
ACPI Warning: Could not enable fixed event 2 (20100121/evxface-146)
button: probe of LNXPWRBN:00 failed with error -22
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
pch_phub 0000:02:00.0: Invalid ROM contents
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:02:0a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:02:0a.1: ttyS4 at I/O 0xe050 (irq = 19) is a PCH_256FIFO
serial 0000:02:0a.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:02:0a.2: ttyS1 at I/O 0xe040 (irq = 19) is a PCH_64FIFO
serial 0000:02:0a.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:02:0a.3: ttyS2 at I/O 0xe030 (irq = 19) is a PCH_64FIFO
serial 0000:02:0a.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19
0000:02:0a.4: ttyS3 at I/O 0xe020 (irq = 19) is a PCH_64FIFO
brd: module loaded
ahci 0000:02:06.0: version 3.0
ahci 0000:02:06.0: PCI INT D -> GSI 17 (level, low) -> IRQ 17
ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:06.0: flags: ncq sntf pm led clo only pmp pio slum part ccc 
ahci 0000:02:06.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 17
ata2: SATA max UDMA/133 abar m1024@0xd0150000 port 0xd0150180 irq 17
console [netcon0] enabled
netconsole: network logging started
PCH Network Driver - version 0.91-NAPI
pch_gbe 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pch_gbe 0000:02:00.1: setting latency timer to 64
00:
13:
20:
f9:
0e:
0f
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:02:02.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:02:02.3: setting latency timer to 64
ehci_hcd 0000:02:02.3: EHCI Host Controller
ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:02.3: cache line size of 64 is not supported
ehci_hcd 0000:02:02.3: irq 19, io mem 0xd0153000
ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:02:08.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:02:08.3: setting latency timer to 64
ehci_hcd 0000:02:08.3: EHCI Host Controller
ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:08.3: cache line size of 64 is not supported
ehci_hcd 0000:02:08.3: irq 16, io mem 0xd014c000
ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:02:02.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:02:02.0: setting latency timer to 64
ohci_hcd 0000:02:02.0: OHCI Host Controller
ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:02.0: irq 19, io mem 0xd0156000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci_hcd 0000:02:02.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:02:02.1: setting latency timer to 64
ohci_hcd 0000:02:02.1: OHCI Host Controller
ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:02.1: irq 19, io mem 0xd0155000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd 0000:02:02.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:02:02.2: setting latency timer to 64
ohci_hcd 0000:02:02.2: OHCI Host Controller
ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
ohci_hcd 0000:02:02.2: irq 19, io mem 0xd0154000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci_hcd 0000:02:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:02:08.0: setting latency timer to 64
ohci_hcd 0000:02:08.0: OHCI Host Controller
ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:02:08.0: irq 16, io mem 0xd014f000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci_hcd 0000:02:08.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:02:08.1: setting latency timer to 64
ohci_hcd 0000:02:08.1: OHCI Host Controller
ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:02:08.1: irq 16, io mem 0xd014e000
ata2: SATA link down (SStatus 0 SControl 300)
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci_hcd 0000:02:08.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:02:08.2: setting latency timer to 64
ohci_hcd 0000:02:08.2: OHCI Host Controller
ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8
ohci_hcd 0000:02:08.2: irq 16, io mem 0xd014d000
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
pch_udc 0000:02:02.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pch_udc 0000:02:02.4: setting latency timer to 64
pch_udc 0000:02:02.4: cache line size of 64 is not supported
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
i2c_eg20t 0000:02:0c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 0)
sdhci-pci 0000:02:04.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems.
sdhci-pci 0000:02:04.0: setting latency timer to 64
mmc0: SDHCI controller on PCI [0000:02:04.0] using DMA
sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 0)
sdhci-pci 0000:02:04.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems.
sdhci-pci 0000:02:04.1: setting latency timer to 64
mmc1: SDHCI controller on PCI [0000:02:04.1] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC888: BIOS auto-probing.
ALSA device list:
  #0: HDA Intel MID at 0xd0400000 irq 16
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
rtc_cmos 00:09: setting system clock to 2011-10-13 02:33:54 UTC (1318473234)
usb 4-1: new low speed USB device using ohci_hcd and address 2
input: USB Optical Mouse as /devices/pci0000:00/0000:00:17.0/0000:01:00.0/0000:02:02.1/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:0461:4D15.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:02:02.1-1/input0
usb 7-1: new low speed USB device using ohci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD1600AAJS-00L7A0, 01.03E01, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
devtmpfs: mounted
Freeing unused kernel memory: 400k freed
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:17.0/0000:01:00.0/0000:02:08.1/usb7/7-1/7-1:1.0/input/input4
generic-usb 0003:413C:2105.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:02:08.1-1/input0
udev[95]: starting version 161
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
VGA arbiter detected; disabling legacy VGA decoding on SDVO device
vgaarb: device changed decodes: PCI:0000:00:03.0,olddecodes=io+mem,decodes=none:owns=none
GMMADR(region 0) start: 0xc0000000 (256M).
GTTADR(region 3) start: 0xd03c0000 (can map 256M RAM), and actual RAM base 0x3ffc0000.
Stolen memory information 
       base in RAM: 0x3f800000 
       size: 7932K, calculated by (GTT RAM base) - (Stolen base)
       size: 8M (dvmt mode=3)
Set up 1983 stolen pages starting at 0x0003f800, GTT offset 0K
[drm] Initialized emgd 1.0.0 20100723 for 0000:00:02.0 on minor 0
[EMGD] drm_init() returning 0
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
SCTP: Hash tables configured (established 65536 bind 65536)
EXT3-fs (sda2): warning: checktime reached, running e2fsck is recommended
EXT3-fs (sda2): using internal journal
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
 Inserting over stolen memory.
pci 0000:00:02.0: setting latency timer to 64
 Inserting over stolen memory.
 Inserting over stolen memory.
 Inserting over stolen memory.

Return To apache_benchmark System Information