dmesg - x264
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-870A-UD3/GA-870A-UD3, BIOS F2 06/07/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 5 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 6 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4220] f4220
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfcf0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfcf0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfcf0000 @ cfced000-cfcf0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffe000-130000000
[ 0.000000] RAMDISK: 37c2a000 - 37e0d000
[ 0.000000] ACPI: RSDP 00000000000f5c30 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfcf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfcf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfcf1100 07983 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfcf0000 00040
[ 0.000000] ACPI: SSDT 00000000cfcf8b80 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfcf9a80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfcf9ac0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfcf9b00 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfcf9b70 0037A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfcf8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fff9000 - 000000012fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cfcf0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047674
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832808 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf1000
[ 0.000000] PM: Registered nosave memory: 00000000cfcf1000 - 00000000cfd00000
[ 0.000000] PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s78464 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030645
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2cc0000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3987216k/4980736k available (4064k kernel code, 790040k absent, 203480k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3717.186 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 7437.13 BogoMIPS (lpj=12390620)
[ 0.003339] pid_max: default: 32768 minimum: 301
[ 0.003415] Security Framework initialized
[ 0.003418] AppArmor: AppArmor disabled by boot time parameter
[ 0.003657] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004589] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006745] Mount-cache hash table entries: 256
[ 0.007009] Initializing cgroup subsys cpuacct
[ 0.007031] Initializing cgroup subsys memory
[ 0.007043] Initializing cgroup subsys devices
[ 0.007045] Initializing cgroup subsys freezer
[ 0.007046] Initializing cgroup subsys net_cls
[ 0.007047] Initializing cgroup subsys blkio
[ 0.007082] tseg: 00cfe00000
[ 0.007084] CPU: Physical Processor ID: 0
[ 0.007084] CPU: Processor Core ID: 0
[ 0.007086] mce: CPU supports 6 MCE banks
[ 0.007093] using AMD E400 aware idle routine
[ 0.007549] ACPI: Core revision 20110413
[ 0.010026] ftrace: allocating 16144 entries in 64 pages
[ 0.013749] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046874] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
[ 0.049997] Performance Events: AMD PMU driver.
[ 0.049997] ... version: 0
[ 0.049997] ... bit width: 48
[ 0.049997] ... generic registers: 4
[ 0.049997] ... value mask: 0000ffffffffffff
[ 0.049997] ... max period: 00007fffffffffff
[ 0.049997] ... fixed-purpose events: 0
[ 0.049997] ... event mask: 000000000000000f
[ 0.049997] System has AMD C1E enabled
[ 0.049997] Switch to broadcast mode on CPU0
[ 0.066703] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093350] Booting Node 0, Processors #1
[ 0.093352] smpboot cpu 1: start_ip = 95000
[ 0.190009] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.190006] Switch to broadcast mode on CPU1
[ 0.210027] #2
[ 0.210029] smpboot cpu 2: start_ip = 95000
[ 0.306671] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.306664] Switch to broadcast mode on CPU2
[ 0.326684] #3
[ 0.326686] smpboot cpu 3: start_ip = 95000
[ 0.423335] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.423326] Switch to broadcast mode on CPU3
[ 0.443350] #4
[ 0.443352] smpboot cpu 4: start_ip = 95000
[ 0.540000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.539990] Switch to broadcast mode on CPU4
[ 0.560018] #5
[ 0.560019] smpboot cpu 5: start_ip = 95000
[ 0.656665] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.656654] Switch to broadcast mode on CPU5
[ 0.663329] Brought up 6 CPUs
[ 0.663331] Total of 6 processors activated (44622.15 BogoMIPS).
[ 0.666829] devtmpfs: initialized
[ 0.667649] PM: Registering ACPI NVS region at cfcf0000 (4096 bytes)
[ 0.667649] print_constraints: dummy:
[ 0.667649] NET: Registered protocol family 16
[ 0.667649] node 0 link 0: io port [7000, ffff]
[ 0.667649] TOM: 00000000d0000000 aka 3328M
[ 0.667649] Fam 10h mmconf [e0000000, e00fffff]
[ 0.667649] node 0 link 0: mmio [a0000, bffff]
[ 0.667649] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.667649] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.667649] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff]
[ 0.667649] TOM2: 0000000130000000 aka 4864M
[ 0.667649] bus: [00, 08] on node 0 link 0
[ 0.667649] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.667649] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.667649] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.667649] bus: 00 index 3 [mem 0xe0900000-0xffffffff]
[ 0.667649] bus: 00 index 4 [mem 0xe0100000-0xe08fffff]
[ 0.667649] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
[ 0.667649] Extended Config Space enabled on 1 nodes
[ 0.667649] ACPI: bus type pci registered
[ 0.667649] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.667649] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.683362] PCI: Using configuration type 1 for base access
[ 0.683597] bio: create slab at 0
[ 0.683771] ACPI: EC: Look up EC in DSDT
[ 0.684566] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 0.684568]
[ 0.684571] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 0.684573]
[ 0.684591] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 0.684593]
[ 0.684596] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 0.684597]
[ 0.687867] ACPI Warning: Incorrect checksum in table [TAMG] - 0x2D, should be 0x2C (20110413/tbutils-314)
[ 0.687943] ACPI: Interpreter enabled
[ 0.687946] ACPI: (supports S0 S3 S4 S5)
[ 0.687959] ACPI: Using IOAPIC for interrupt routing
[ 0.747948] ACPI: No dock devices found.
[ 0.747949] HEST: Table not found.
[ 0.747951] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.747983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.748047] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.748048] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.748050] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.748051] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.748053] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.748062] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.748071] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.748093] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.748112] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.748114] pci 0000:00:02.0: PME# disabled
[ 0.748128] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.748145] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.748147] pci 0000:00:09.0: PME# disabled
[ 0.748156] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.748173] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.748175] pci 0000:00:0a.0: PME# disabled
[ 0.748194] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.748209] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.748215] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.748222] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.748228] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.748234] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.748241] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.748278] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.748288] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.748335] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.748347] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 0.748394] pci 0000:00:12.2: supports D1 D2
[ 0.748395] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.748398] pci 0000:00:12.2: PME# disabled
[ 0.748413] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.748422] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.748469] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.748482] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 0.748529] pci 0000:00:13.2: supports D1 D2
[ 0.748530] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.748532] pci 0000:00:13.2: PME# disabled
[ 0.748546] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.748596] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.748646] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.748672] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.748681] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.748728] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.748764] pci 0000:00:15.0: supports D1 D2
[ 0.748779] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.748815] pci 0000:00:15.1: supports D1 D2
[ 0.748831] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.748867] pci 0000:00:15.2: supports D1 D2
[ 0.748883] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.748919] pci 0000:00:15.3: supports D1 D2
[ 0.748935] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.748944] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 0.748991] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.749004] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 0.749051] pci 0000:00:16.2: supports D1 D2
[ 0.749052] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.749054] pci 0000:00:16.2: PME# disabled
[ 0.749067] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.749077] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.749086] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.749094] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.749105] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.749142] pci 0000:01:00.0: [10de:0392] type 0 class 0x000300
[ 0.749150] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.749158] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.749167] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.749172] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.749178] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.749202] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.749207] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.749209] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.749211] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.749214] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.749241] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.749254] pci 0000:02:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
[ 0.749303] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.749306] pci 0000:02:00.0: PME# disabled
[ 0.753302] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.753306] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.753308] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.753311] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.753341] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.753404] pci 0000:03:00.0: reg 24: [mem 0xfd4fe000-0xfd4fffff]
[ 0.753436] pci 0000:03:00.0: PME# supported from D3hot
[ 0.753440] pci 0000:03:00.0: PME# disabled
[ 0.753460] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.753477] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07]
[ 0.753487] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03]
[ 0.753496] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07]
[ 0.753505] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.753515] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.753564] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.753573] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.753575] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.753577] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.753579] pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
[ 0.753603] pci 0000:04:06.0: [13f6:8788] type 0 class 0x000401
[ 0.753619] pci 0000:04:06.0: reg 10: [io 0xbe00-0xbeff]
[ 0.753684] pci 0000:04:06.0: supports D1 D2
[ 0.753700] pci 0000:04:07.0: [14f1:8800] type 0 class 0x000400
[ 0.753718] pci 0000:04:07.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.753800] pci 0000:04:07.1: [14f1:8801] type 0 class 0x000480
[ 0.753816] pci 0000:04:07.1: reg 10: [mem 0xf5000000-0xf5ffffff]
[ 0.753895] pci 0000:04:07.2: [14f1:8802] type 0 class 0x000480
[ 0.753911] pci 0000:04:07.2: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.753988] pci 0000:04:07.4: [14f1:8804] type 0 class 0x000480
[ 0.754004] pci 0000:04:07.4: reg 10: [mem 0xf7000000-0xf7ffffff]
[ 0.754086] pci 0000:04:08.0: [109e:036e] type 0 class 0x000400
[ 0.754104] pci 0000:04:08.0: reg 10: [mem 0xfdeff000-0xfdefffff pref]
[ 0.754188] pci 0000:04:08.1: [109e:0878] type 0 class 0x000480
[ 0.754205] pci 0000:04:08.1: reg 10: [mem 0xfdefe000-0xfdefefff pref]
[ 0.754301] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.754318] pci 0000:04:0e.0: reg 10: [mem 0xf9fff000-0xf9fff7ff]
[ 0.754327] pci 0000:04:0e.0: reg 14: [mem 0xf9ff8000-0xf9ffbfff]
[ 0.754389] pci 0000:04:0e.0: supports D1 D2
[ 0.754390] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.754393] pci 0000:04:0e.0: PME# disabled
[ 0.754419] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.754421] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.754424] pci 0000:00:14.4: bridge window [mem 0xf5000000-0xf9ffffff]
[ 0.754427] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.754429] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.754430] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.754431] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.754433] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.754434] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.754480] pci 0000:05:00.0: [197b:2363] type 0 class 0x000106
[ 0.754557] pci 0000:05:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[ 0.754595] pci 0000:05:00.0: PME# supported from D3hot
[ 0.754599] pci 0000:05:00.0: PME# disabled
[ 0.754623] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 0.754644] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 0.754655] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 0.754667] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 0.754678] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 0.754690] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 0.754751] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.754762] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.754765] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.754767] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.754771] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.754817] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 0.754831] pci 0000:06:00.0: reg 10: [io 0x9e00-0x9eff]
[ 0.754855] pci 0000:06:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
[ 0.754870] pci 0000:06:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
[ 0.754881] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.754914] pci 0000:06:00.0: supports D1 D2
[ 0.754915] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.754918] pci 0000:06:00.0: PME# disabled
[ 0.759972] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.759977] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 0.759979] pci 0000:00:15.1: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.759983] pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.760017] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 0.760020] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.760023] pci 0000:00:15.2: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.760026] pci 0000:00:15.2: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.760058] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 0.760061] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 0.760063] pci 0000:00:15.3: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.760067] pci 0000:00:15.3: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.760087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.760229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.760245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.760260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.760275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.760291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.760326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.760345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.760359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.760375] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.760377] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.760378] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.769342] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769366] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769387] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769447] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769468] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769488] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.769547] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.769551] vgaarb: loaded
[ 0.769552] vgaarb: bridge control possible 0000:01:00.0
[ 0.769598] PCI: Using ACPI for IRQ routing
[ 0.775351] PCI: pci_cache_line_size set to 64 bytes
[ 0.775357] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.775441] reserve RAM buffer: 000000000009a000 - 000000000009ffff
[ 0.775443] reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff
[ 0.775518] NetLabel: Initializing
[ 0.775519] NetLabel: domain hash size = 128
[ 0.775519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.775529] NetLabel: unlabeled traffic allowed by default
[ 0.775538] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.775540] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.776641] Switching to clocksource hpet
[ 0.778992] Switched to NOHz mode on CPU #0
[ 0.778995] Switched to NOHz mode on CPU #4
[ 0.778998] Switched to NOHz mode on CPU #1
[ 0.779003] Switched to NOHz mode on CPU #3
[ 0.779007] Switched to NOHz mode on CPU #5
[ 0.779011] Switched to NOHz mode on CPU #2
[ 0.779814] pnp: PnP ACPI init
[ 0.779822] ACPI: bus type pnp registered
[ 0.779865] pnp 00:00: [bus 00-ff]
[ 0.779866] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.779868] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.779869] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.779870] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.779871] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.779873] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[ 0.779894] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.779900] pnp 00:01: [io 0x0010-0x001f]
[ 0.779901] pnp 00:01: [io 0x0022-0x003f]
[ 0.779902] pnp 00:01: [io 0x0044-0x005f]
[ 0.779903] pnp 00:01: [io 0x0062-0x0063]
[ 0.779904] pnp 00:01: [io 0x0065-0x006f]
[ 0.779906] pnp 00:01: [io 0x0074-0x007f]
[ 0.779907] pnp 00:01: [io 0x0091-0x0093]
[ 0.779908] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.779909] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.779910] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.779911] pnp 00:01: [io 0x0220-0x0225]
[ 0.779912] pnp 00:01: [io 0x0290-0x0294]
[ 0.779948] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.779949] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.779951] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.779953] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.970139] pnp 00:02: [io 0x4100-0x411f]
[ 0.970141] pnp 00:02: [io 0x0228-0x022f]
[ 0.970142] pnp 00:02: [io 0x040b]
[ 0.970143] pnp 00:02: [io 0x04d6]
[ 0.970144] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.970145] pnp 00:02: [io 0x0c14]
[ 0.970146] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.970147] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.970148] pnp 00:02: [io 0x0c6f]
[ 0.970149] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.970150] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.970151] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.970152] pnp 00:02: [io 0x4000-0x40fe]
[ 0.970153] pnp 00:02: [io 0x4210-0x4217]
[ 0.970154] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.970155] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.970156] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.970157] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.970158] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.970162] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970180] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.970192] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.970214] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.970216] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.970217] system 00:02: [io 0x040b] has been reserved
[ 0.970219] system 00:02: [io 0x04d6] has been reserved
[ 0.970220] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.970221] system 00:02: [io 0x0c14] has been reserved
[ 0.970223] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.970224] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.970225] system 00:02: [io 0x0c6f] has been reserved
[ 0.970228] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.970229] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.970230] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.970232] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.970233] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.970234] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.970236] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.970237] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.970239] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.970241] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.970293] pnp 00:03: [dma 4]
[ 0.970294] pnp 00:03: [io 0x0000-0x000f]
[ 0.970296] pnp 00:03: [io 0x0080-0x0090]
[ 0.970297] pnp 00:03: [io 0x0094-0x009f]
[ 0.970298] pnp 00:03: [io 0x00c0-0x00df]
[ 0.970313] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.970335] pnp 00:04: [io 0x0070-0x0073]
[ 0.970343] pnp 00:04: [irq 8]
[ 0.970359] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.970363] pnp 00:05: [io 0x0061]
[ 0.970377] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.970381] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.970386] pnp 00:06: [irq 13]
[ 0.970400] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.970601] pnp 00:07: [io 0x0060]
[ 0.970602] pnp 00:07: [io 0x0064]
[ 0.970607] pnp 00:07: [irq 1]
[ 0.970627] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.970641] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.970670] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.970672] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.970733] pnp 00:09: [mem 0x000f0000-0x000f3fff]
[ 0.970735] pnp 00:09: [mem 0x000f4000-0x000f7fff]
[ 0.970736] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.970737] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.970738] pnp 00:09: [mem 0xcfcf0000-0xcfcfffff]
[ 0.970739] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.970740] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.970741] pnp 00:09: [mem 0x00100000-0xcfceffff]
[ 0.970742] pnp 00:09: [mem 0xcfd00000-0xcfdfffff]
[ 0.970743] pnp 00:09: [mem 0xcfe00000-0xcfefffff]
[ 0.970744] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.970745] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.970746] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.970749] pnp 00:09: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970751] pnp 00:09: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970753] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970755] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970757] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970759] pnp 00:09: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.970801] system 00:09: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
[ 0.970803] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.970804] system 00:09: [mem 0xcfd00000-0xcfdfffff] has been reserved
[ 0.970806] system 00:09: [mem 0xcfe00000-0xcfefffff] could not be reserved
[ 0.970807] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.970809] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.970810] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.970812] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.970823] pnp: PnP ACPI: found 10 devices
[ 0.970824] ACPI: ACPI bus type pnp unregistered
[ 0.976199] PCI: max bus depth: 1 pci_try_num: 2
[ 0.976228] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.976230] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.976232] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.976234] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.976236] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.976239] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.976240] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.976242] pci 0000:00:09.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.976244] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.976247] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.976248] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.976251] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.976252] pci 0000:00:0a.0: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
[ 0.976256] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.976258] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.976261] pci 0000:00:14.4: bridge window [mem 0xf5000000-0xf9ffffff]
[ 0.976264] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.976269] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.976270] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.976273] pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.976276] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.976280] pci 0000:06:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.976281] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.976283] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 0.976286] pci 0000:00:15.1: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.976289] pci 0000:00:15.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.976292] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 0.976294] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.976297] pci 0000:00:15.2: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.976300] pci 0000:00:15.2: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.976303] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 0.976305] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 0.976308] pci 0000:00:15.3: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.976311] pci 0000:00:15.3: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.976322] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.976325] pci 0000:00:02.0: setting latency timer to 64
[ 0.976332] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.976334] pci 0000:00:09.0: setting latency timer to 64
[ 0.976337] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.976339] pci 0000:00:0a.0: setting latency timer to 64
[ 0.976345] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.976348] pci 0000:00:15.0: setting latency timer to 64
[ 0.976351] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.976354] pci 0000:00:15.1: setting latency timer to 64
[ 0.976358] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.976360] pci 0000:00:15.2: setting latency timer to 64
[ 0.976364] pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.976366] pci 0000:00:15.3: setting latency timer to 64
[ 0.976369] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.976370] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.976372] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.976373] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.976375] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.976376] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.976378] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.976379] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.976381] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.976382] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.976384] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.976386] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.976387] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.976389] pci_bus 0000:03: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
[ 0.976390] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.976392] pci_bus 0000:04: resource 1 [mem 0xf5000000-0xf9ffffff]
[ 0.976393] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.976395] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.976396] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.976398] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.976399] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.976400] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.976402] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.976403] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.976405] pci_bus 0000:05: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.976407] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.976408] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.976410] pci_bus 0000:06: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.976411] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 0.976413] pci_bus 0000:07: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.976414] pci_bus 0000:07: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.976416] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
[ 0.976417] pci_bus 0000:08: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.976419] pci_bus 0000:08: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.976468] NET: Registered protocol family 2
[ 0.976587] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.977304] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.979007] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.979215] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.979217] TCP reno registered
[ 0.979223] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.979244] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.979430] NET: Registered protocol family 1
[ 1.033502] pci 0000:01:00.0: Boot video device
[ 1.033554] PCI: CLS 64 bytes, default 64
[ 1.033589] Unpacking initramfs...
[ 1.163961] Freeing initrd memory: 1932k freed
[ 1.165800] PCI-DMA: Disabling AGP.
[ 1.165892] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.165893] PCI-DMA: using GART IOMMU.
[ 1.165895] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.168852] audit: initializing netlink socket (disabled)
[ 1.168864] type=2000 audit(1313625769.166:1): initialized
[ 1.176450] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.192052] VFS: Disk quotas dquot_6.5.2
[ 1.192144] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.192254] msgmni has been set to 7920
[ 1.192448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.192483] io scheduler noop registered
[ 1.192484] io scheduler deadline registered
[ 1.192511] io scheduler cfq registered (default)
[ 1.192614] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.192633] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.192708] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.192722] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 1.192780] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.192794] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.193106] vesafb: mode is 2048x1536x32, linelength=8192, pages=0
[ 1.193107] vesafb: scrolling: redraw
[ 1.193109] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.193858] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 12288k, total 12288k
[ 1.270576] Console: switching to colour frame buffer device 256x96
[ 1.347227] fb0: VESA VGA frame buffer device
[ 1.347238] ERST: Table is not found!
[ 1.536868] Linux agpgart interface v0.103
[ 1.536907] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.536908] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.537017] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.537066] mousedev: PS/2 mouse device common for all mice
[ 1.537107] rtc_cmos 00:04: RTC can wake from S4
[ 1.537178] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.537200] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.537205] cpuidle: using governor ladder
[ 1.537206] cpuidle: using governor menu
[ 1.537348] TCP cubic registered
[ 1.537350] NET: Registered protocol family 17
[ 1.537355] Registering the dns_resolver key type
[ 1.537408] PM: Hibernation image not present or could not be loaded.
[ 1.537411] registered taskstats version 1
[ 1.545141] rtc_cmos 00:04: setting system clock to 2011-08-18 00:02:50 UTC (1313625770)
[ 1.545169] Initializing network drop monitor service
[ 1.545950] Freeing unused kernel memory: 712k freed
[ 1.546082] Write protecting the kernel read-only data: 6144k
[ 1.546219] Freeing unused kernel memory: 12k freed
[ 1.547879] Freeing unused kernel memory: 776k freed
[ 1.556407] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.558226] udevd[126]: starting version 173
[ 1.571543] usbcore: registered new interface driver usbfs
[ 1.571571] usbcore: registered new interface driver hub
[ 1.571718] usbcore: registered new device driver usb
[ 1.572024] SCSI subsystem initialized
[ 1.574603] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.574648] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.574651] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.574683] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.574717] libata version 3.00 loaded.
[ 1.574811] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdffe000
[ 1.574849] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.574852] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.574854] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.574857] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 1.574858] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1.574861] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 1.574862] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 1.575084] xHCI xhci_add_endpoint called for root hub
[ 1.575086] xHCI xhci_check_bandwidth called for root hub
[ 1.575105] hub 1-0:1.0: USB hub found
[ 1.575109] hub 1-0:1.0: 2 ports detected
[ 1.575158] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.575162] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.578163] ahci 0000:00:11.0: version 3.0
[ 1.578176] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.578212] ahci 0000:00:11.0: irq 50 for MSI/MSI-X
[ 1.578293] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.578296] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.578904] scsi0 : ahci
[ 1.579332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.579536] xHCI xhci_add_endpoint called for root hub
[ 1.579538] xHCI xhci_check_bandwidth called for root hub
[ 1.579568] hub 2-0:1.0: USB hub found
[ 1.579576] hub 2-0:1.0: 2 ports detected
[ 1.579607] scsi1 : ahci
[ 1.579842] scsi2 : ahci
[ 1.579985] scsi3 : ahci
[ 1.581282] scsi4 : ahci
[ 1.581964] scsi5 : ahci
[ 1.581982] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.582064] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 50
[ 1.582068] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 50
[ 1.582071] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 50
[ 1.582073] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 50
[ 1.582076] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 50
[ 1.582078] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 50
[ 1.582107] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.582133] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.582462] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.582490] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.582503] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.582510] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.582528] QUIRK: Enable AMD PLL fix
[ 1.582537] ehci_hcd 0000:00:12.2: debug port 1
[ 1.582552] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 1.582979] scsi6 : pata_jmicron
[ 1.583697] scsi7 : pata_jmicron
[ 1.583851] ata7: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19
[ 1.583853] ata8: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19
[ 1.584022] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.584043] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 1.584080] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.584828] scsi8 : pata_jmicron
[ 1.585102] scsi9 : pata_jmicron
[ 1.585302] ata9: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 1.585304] ata10: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 1.591370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.593452] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.593536] hub 3-0:1.0: USB hub found
[ 1.593539] hub 3-0:1.0: 5 ports detected
[ 1.593660] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.593685] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.593692] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.593699] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.593715] ehci_hcd 0000:00:13.2: debug port 1
[ 1.593726] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 1.596811] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.596814] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.596818] ahci 0000:03:00.0: setting latency timer to 64
[ 1.597065] scsi10 : ahci
[ 1.597118] scsi11 : ahci
[ 1.597146] ata11: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 irq 18
[ 1.597149] ata12: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 irq 18
[ 1.597203] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.603453] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.603524] hub 4-0:1.0: USB hub found
[ 1.603526] hub 4-0:1.0: 5 ports detected
[ 1.603622] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.603633] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.603639] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 1.603644] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.603659] ehci_hcd 0000:00:16.2: debug port 1
[ 1.603669] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 1.610141] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.610144] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.610148] ahci 0000:05:00.0: setting latency timer to 64
[ 1.610360] scsi12 : ahci
[ 1.610409] scsi13 : ahci
[ 1.610436] ata13: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 17
[ 1.610439] ata14: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 17
[ 1.613446] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.613515] hub 5-0:1.0: USB hub found
[ 1.613518] hub 5-0:1.0: 4 ports detected
[ 1.613618] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.613629] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.613636] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 1.613648] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 1.670851] hub 6-0:1.0: USB hub found
[ 1.670855] hub 6-0:1.0: 5 ports detected
[ 1.670964] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.670975] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.670984] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.670997] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 1.727523] hub 7-0:1.0: USB hub found
[ 1.727527] hub 7-0:1.0: 5 ports detected
[ 1.727639] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.727673] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.727679] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.727692] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 1.760640] ata9.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HP10, max UDMA/66
[ 1.760644] ata9.01: ATAPI: DVD-RW IDE1008, VER 0056, max UDMA/66
[ 1.760646] ata9.00: limited to UDMA/33 due to 40-wire cable
[ 1.760647] ata9.01: limited to UDMA/33 due to 40-wire cable
[ 1.784189] hub 8-0:1.0: USB hub found
[ 1.784193] hub 8-0:1.0: 2 ports detected
[ 1.784297] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.784308] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.784313] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.784325] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 1.790667] ata9.00: configured for UDMA/33
[ 1.803975] ata9.01: configured for UDMA/33
[ 1.840844] hub 9-0:1.0: USB hub found
[ 1.840848] hub 9-0:1.0: 4 ports detected
[ 1.893461] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.893512] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.900128] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.900189] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.916800] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.916833] ata12: SATA link down (SStatus 0 SControl 300)
[ 2.060102] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.065509] ata5.00: ATA-8: WDC WD6402AAEX-00Y9A0, 01.01V01, max UDMA/133
[ 2.065511] ata5.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.066722] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.066822] ata5.00: configured for UDMA/133
[ 2.066977] scsi 4:0:0:0: Direct-Access ATA WDC WD6402AAEX-0 01.0 PQ: 0 ANSI: 5
[ 2.068319] sd 4:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.068405] sd 4:0:0:0: [sda] Write Protect is off
[ 2.068407] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.068437] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.074503] ata6.00: ATA-8: WDC WD6402AAEX-00Y9A0, 05.01D05, max UDMA/133
[ 2.074505] ata6.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.075785] ata6.00: configured for UDMA/133
[ 2.075913] scsi 5:0:0:0: Direct-Access ATA WDC WD6402AAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.076020] sd 5:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.076114] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.076117] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.076141] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.082500] sda: sda1
[ 2.082728] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.088322] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.088609] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.090135] ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.096799] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.097880] ata14.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[ 2.097882] ata14.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.099157] ata14.00: configured for UDMA/133
[ 2.102510] ata13.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 2.102512] ata13.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.107516] ata13.00: configured for UDMA/133
[ 2.170102] Refined TSC clocksource calibration: 3717.008 MHz.
[ 2.170111] Switching to clocksource tsc
[ 2.239258] scsi 8:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HP10 PQ: 0 ANSI: 5
[ 2.239693] scsi 8:0:1:0: CD-ROM DVDRW IDE1008 0056 PQ: 0 ANSI: 5
[ 2.401741] scsi 12:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 2.401837] sd 12:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.401934] scsi 13:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.401937] sd 12:0:0:0: [sdc] Write Protect is off
[ 2.401939] sd 12:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.401962] sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.402220] sd 13:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.402275] sd 13:0:0:0: [sdd] Write Protect is off
[ 2.402277] sd 13:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.402300] sd 13:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.419284] sdc: sdc1
[ 2.419482] sd 12:0:0:0: [sdc] Attached SCSI disk
[ 2.425710] sdd: sdd1
[ 2.425956] sd 13:0:0:0: [sdd] Attached SCSI disk
[ 2.433058] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.433060] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.433227] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 2.435616] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.435800] sr 8:0:1:0: Attached scsi CD-ROM sr1
[ 2.470033] usb 6-3: new full speed USB device number 2 using ohci_hcd
[ 2.638536] Initializing USB Mass Storage driver...
[ 2.638628] scsi14 : usb-storage 6-3:1.0
[ 2.638695] usbcore: registered new interface driver usb-storage
[ 2.638696] USB Mass Storage support registered.
[ 2.706462] EXT4-fs (sdb3): INFO: recovery required on readonly filesystem
[ 2.706464] EXT4-fs (sdb3): write access will be enabled during recovery
[ 2.886733] usb 6-4: new full speed USB device number 3 using ohci_hcd
[ 3.306695] usb 7-1: new full speed USB device number 2 using ohci_hcd
[ 3.710015] usb 9-4: new full speed USB device number 2 using ohci_hcd
[ 3.867888] hub 9-4:1.0: USB hub found
[ 3.869842] hub 9-4:1.0: 4 ports detected
[ 4.157849] usb 9-4.1: new low speed USB device number 3 using ohci_hcd
[ 4.158878] scsi 14:0:0:0: Direct-Access SPRING MultiCard Slot A 0100 PQ: 0 ANSI: 0 CCS
[ 4.174872] scsi 14:0:0:1: Direct-Access SPRING MultiCard Slot C 0100 PQ: 0 ANSI: 0 CCS
[ 4.184869] sd 14:0:0:0: [sde] 250880 512-byte logical blocks: (128 MB/122 MiB)
[ 4.200820] sd 14:0:0:0: [sde] Write Protect is off
[ 4.200823] sd 14:0:0:0: [sde] Mode Sense: 22 00 00 00
[ 4.216809] sd 14:0:0:0: [sde] Incomplete mode parameter data
[ 4.217017] sd 14:0:0:0: [sde] Assuming drive cache: write through
[ 4.282975] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4.1/9-4.1:1.0/input/input1
[ 4.283005] generic-usb 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:16.0-4.1/input0
[ 4.286811] sd 14:0:0:1: [sdf] Attached SCSI removable disk
[ 4.292875] sd 14:0:0:0: [sde] Incomplete mode parameter data
[ 4.293087] sd 14:0:0:0: [sde] Assuming drive cache: write through
[ 4.293846] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4.1/9-4.1:1.1/input/input2
[ 4.293915] generic-usb 0003:046D:C226.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:16.0-4.1/input1
[ 4.293925] usbcore: registered new interface driver usbhid
[ 4.293926] usbhid: USB HID core driver
[ 4.302866] sde: sde1
[ 4.330819] usb 9-4.3: new full speed USB device number 4 using ohci_hcd
[ 4.340867] sd 14:0:0:0: [sde] Incomplete mode parameter data
[ 4.341074] sd 14:0:0:0: [sde] Assuming drive cache: write through
[ 4.341294] sd 14:0:0:0: [sde] Attached SCSI removable disk
[ 4.444956] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4.3/9-4.3:1.0/input/input3
[ 4.444997] generic-usb 0003:046D:C531.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:16.0-4.3/input0
[ 4.455912] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4.3/9-4.3:1.1/input/input4
[ 4.455956] generic-usb 0003:046D:C531.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:16.0-4.3/input1
[ 4.530849] usb 9-4.4: new full speed USB device number 5 using ohci_hcd
[ 4.661903] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4.4/9-4.4:1.0/input/input5
[ 4.661947] generic-usb 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:16.0-4.4/input0
[ 7.557861] EXT4-fs (sdb3): orphan cleanup on readonly fs
[ 7.557867] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524618
[ 7.557885] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524482
[ 7.557918] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524476
[ 7.557926] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524474
[ 7.557930] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524473
[ 7.557934] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524472
[ 7.557938] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524471
[ 7.557942] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524470
[ 7.557946] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524439
[ 7.557951] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524353
[ 7.557955] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524352
[ 7.557959] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524351
[ 7.557963] EXT4-fs (sdb3): ext4_orphan_cleanup: deleting unreferenced inode 524350
[ 7.557967] EXT4-fs (sdb3): 13 orphan inodes deleted
[ 7.557968] EXT4-fs (sdb3): recovery complete
[ 8.111381] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.123057] udevd[428]: starting version 173
[ 9.328385] ACPI: acpi_idle registered with cpuidle
[ 9.328409] ACPI: processor limited to max C-state 1
[ 9.329188] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
[ 9.329195] powernow-k8: Core Performance Boosting: on.
[ 9.329215] powernow-k8: 0 : pstate 0 (3700 MHz)
[ 9.329217] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 9.329218] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 9.329218] powernow-k8: 3 : pstate 3 (800 MHz)
[ 9.349363] vboxdrv: Found 6 processor cores.
[ 9.349407] VBoxDrv: dbg - g_abExecMemory=ffffffffa0209a60
[ 9.349510] vboxdrv: fAsync=0 offMin=0x41d offMax=0x82d3
[ 9.349543] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.349544] vboxdrv: Successfully loaded version 4.1.2_OSE (interface 0x00190000).
[ 9.446325] wmi: Mapper loaded
[ 9.446859] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 9.446864] ACPI: Power Button [PWRB]
[ 9.447281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 9.447286] ACPI: Power Button [PWRF]
[ 9.559766] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 9.559787] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 9.559840] sr 8:0:0:0: Attached scsi generic sg2 type 5
[ 9.559863] sr 8:0:1:0: Attached scsi generic sg3 type 5
[ 9.559897] sd 12:0:0:0: Attached scsi generic sg4 type 0
[ 9.559915] sd 13:0:0:0: Attached scsi generic sg5 type 0
[ 9.559938] sd 14:0:0:0: Attached scsi generic sg6 type 0
[ 9.559956] sd 14:0:0:1: Attached scsi generic sg7 type 0
[ 9.565120] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.569700] MCE: In-kernel MCE decoding enabled.
[ 9.570656] EDAC MC: Ver: 2.1.0
[ 9.583753] AMD64 EDAC driver v3.4.0
[ 9.583794] EDAC amd64: DRAM ECC disabled.
[ 9.583801] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.583802] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.583803] (Note that use of the override may cause unknown side effects.)
[ 9.625837] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 9.625887] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 9.708963] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.709006] Bt87x 0000:04:08.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.709118] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 9.710934] Linux media interface: v0.10
[ 9.809342] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.820628] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.820642] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.820691] r8169 0000:06:00.0: setting latency timer to 64
[ 9.820737] r8169 0000:06:00.0: irq 51 for MSI/MSI-X
[ 9.820882] r8169 0000:06:00.0: eth0: RTL8168d/8111d at 0xffffc90000662000, 1c:6f:65:89:36:9a, XID 083000c0 IRQ 51
[ 9.860152] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 9.860225] AV200 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 9.865248] Linux video capture interface: v2.00
[ 10.081238] nvidia: module license 'NVIDIA' taints kernel.
[ 10.081241] Disabling lock debugging due to kernel taint
[ 10.104365] IR NEC protocol handler initialized
[ 10.120730] bttv: driver version 0.9.18 loaded
[ 10.120732] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.156816] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[ 10.186912] IR RC5(x) protocol handler initialized
[ 10.187677] IR RC6 protocol handler initialized
[ 10.206452] cx2388x alsa driver version 0.0.8 loaded
[ 10.214016] IR JVC protocol handler initialized
[ 10.214498] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 10.214730] IR Sony protocol handler initialized
[ 10.247096] lirc_dev: IR Remote Control driver registered, major 249
[ 10.247374] IR LIRC bridge handler initialized
[ 10.360076] firewire_core: created device fw0: GUID 00180c20001c6f65, S400
[ 10.407634] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.407640] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.407644] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.407775] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
[ 10.483980] bttv: Bt8xx card found (0).
[ 10.483992] bttv 0000:04:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.484002] bttv0: Bt878 (rev 17) at 0000:04:08.0, irq: 22, latency: 32, mmio: 0xfdeff000
[ 10.484045] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[ 10.484047] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[ 10.484071] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
[ 10.484133] bttv0: i2c: checking for MSP34xx @ 0x80... found
[ 10.484435] bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
[ 10.484437] bttv0: tuner type=33
[ 10.725842] i2c-core: driver [msp3400] using legacy suspend method
[ 10.725844] i2c-core: driver [msp3400] using legacy resume method
[ 10.740353] msp3400 1-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
[ 10.740355] msp3400 1-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect
[ 10.789184] i2c-core: driver [tuner] using legacy suspend method
[ 10.789186] i2c-core: driver [tuner] using legacy resume method
[ 10.826242] tda9887 1-004b: creating new instance
[ 10.826244] tda9887 1-004b: tda988[5/6/7] found
[ 10.826958] tuner 1-004b: Tuner 74 found with type(s) Radio TV.
[ 10.833640] Chip ID is not zero. It is not a TEA5767
[ 10.833644] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
[ 10.838086] mt20xx 1-0060: microtune: companycode=3cbf part=42 rev=2f
[ 10.839538] mt20xx 1-0060: microtune MT2050 found, OK
[ 10.841687] bttv0: registered device video0
[ 10.841703] bttv0: registered device vbi0
[ 10.841719] bttv0: registered device radio0
[ 10.845077] bttv0: PLL: 28636363 => 35468950 .. ok
[ 10.882179] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
[ 10.882182] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 10.998820] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[ 11.009196] tda9887 2-0043: creating new instance
[ 11.009198] tda9887 2-0043: tda988[5/6/7] found
[ 11.010074] tuner 2-0043: Tuner 74 found with type(s) Radio TV.
[ 11.011601] tuner 2-0061: Tuner -1 found with type(s) Radio TV.
[ 11.054015] tveeprom 2-0050: Hauppauge model 69009, rev B5D3, serial# 7151831
[ 11.054017] tveeprom 2-0050: MAC address is 00:0d:fe:6d:20:d7
[ 11.054018] tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
[ 11.054020] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 11.054022] tveeprom 2-0050: audio processor is CX880 (idx 30)
[ 11.054023] tveeprom 2-0050: decoder processor is CX880 (idx 20)
[ 11.054024] tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
[ 11.054026] cx88[0]: hauppauge eeprom: model=69009
[ 11.062311] tuner-simple 2-0061: creating new instance
[ 11.062313] tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
[ 11.090072] Registered IR keymap rc-hauppauge
[ 11.090129] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:04:07.2/rc/rc0/input9
[ 11.090168] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:04:07.2/rc/rc0
[ 11.090220] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 11.090222] cx88[0]/2: cx2388x 8802 Driver Manager
[ 11.090236] cx88-mpeg driver manager 0000:04:07.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 11.090242] cx88[0]/2: found at 0000:04:07.2, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
[ 11.090313] cx88_audio 0000:04:07.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 11.090329] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 11.090562] cx8800 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 11.090566] cx88[0]/0: found at 0000:04:07.0, rev: 5, irq: 21, latency: 32, mmio: 0xf6000000
[ 11.099567] wm8775 2-001b: chip found @ 0x36 (cx88[0])
[ 11.115732] cx88[0]/0: registered device video1 [v4l2]
[ 11.115750] cx88[0]/0: registered device vbi1
[ 11.115766] cx88[0]/0: registered device radio1
[ 11.140297] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[ 11.140299] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 11.140302] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
[ 11.140304] cx88[0]/2: cx2388x based DVB/ATSC card
[ 11.140305] cx8802_alloc_frontends() allocating 2 frontend(s)
[ 11.164843] tuner-simple 2-0061: attaching existing instance
[ 11.164846] tuner-simple 2-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
[ 11.169120] DVB: registering new adapter (cx88[0])
[ 11.169122] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
[ 11.169414] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
[ 22.691837] EXT4-fs (sdb3): re-mounted. Opts: (null)
[ 22.833492] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.859342] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 22.927102] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.953846] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.046383] EXT3-fs: barriers not enabled
[ 23.046560] kjournald starting. Commit interval 5 seconds
[ 23.046768] EXT3-fs (sdd1): using internal journal
[ 23.046771] EXT3-fs (sdd1): mounted filesystem with ordered data mode
[ 23.118218] Adding 8297568k swap on /dev/sdb2. Priority:-1 extents:1 across:8297568k
[ 25.420309] NET: Registered protocol family 10
[ 25.952501] Bluetooth: Core ver 2.16
[ 25.952513] NET: Registered protocol family 31
[ 25.952514] Bluetooth: HCI device and connection manager initialized
[ 25.952516] Bluetooth: HCI socket layer initialized
[ 25.952517] Bluetooth: L2CAP socket layer initialized
[ 25.952599] Bluetooth: SCO socket layer initialized
[ 25.999553] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.094973] r8169 0000:06:00.0: eth0: link down
[ 26.094983] r8169 0000:06:00.0: eth0: link down
[ 26.095299] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.609619] it87: Found IT8720F chip at 0x228, revision 8
[ 26.609636] it87: Routing internal VCCH to in7
[ 26.609640] it87: Beeping is supported
[ 27.582958] r8169 0000:06:00.0: eth0: link up
[ 27.583281] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.585114] input: G15 Extra Keys as /devices/virtual/input/input10
[ 36.663348] CE: hpet increased min_delta_ns to 20113 nsec
[ 37.656721] eth0: no IPv6 routers present
[ 88.157551] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[ 88.208547] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 88.465440] EXT4-fs (sdb4): re-mounted. Opts: user_xattr,commit=0
[ 88.471215] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 88.526401] EXT4-fs (sdc1): re-mounted. Opts: commit=0