dmesg - y
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-10-generic (buildd@yellow) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28 15:07:17 UTC 2011 (Ubuntu 2.6.38-10.46-generic 2.6.38.7)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfcf0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfcf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfcf1000 - 00000000bfd00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfd00000 - 00000000bfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FD 07/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFD00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000200000000 mask FFFFC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfd00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfcf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f44d0] f44d0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfcf0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfcf0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfcf0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 1G
[ 0.000000] kernel direct mapping tables up to 240000000 @ bfcef000-bfcf0000
[ 0.000000] RAMDISK: 35b5a000 - 36da5000
[ 0.000000] ACPI: RSDP 00000000000f5e70 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfcf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfcf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfcf10c0 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfcf0000 00040
[ 0.000000] ACPI: SSDT 00000000bfcf8840 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bfcf9740 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfcf9780 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000bfcf97c0 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: APIC 00000000bfcf8780 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000bfcf0
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2096250
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3916 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767272 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfcf0000 - 00000000bfcf1000
[ 0.000000] PM: Registered nosave memory: 00000000bfcf1000 - 00000000bfd00000
[ 0.000000] PM: Registered nosave memory: 00000000bfd00000 - 00000000bfe00000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfe00000 (gap: bfe00000:20200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfa00000 s84416 r8192 d22080 u262144
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063988
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 8105584k/9437184k available (5941k kernel code, 1052184k absent, 279416k reserved, 5016k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.113 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.22 BogoMIPS (lpj=32141130)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000036] AppArmor: AppArmor initialized
[ 0.000037] Yama: becoming mindful.
[ 0.000593] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011665] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012752] Mount-cache hash table entries: 256
[ 0.012854] Initializing cgroup subsys ns
[ 0.012856] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.012859] Initializing cgroup subsys cpuacct
[ 0.012862] Initializing cgroup subsys memory
[ 0.012869] Initializing cgroup subsys devices
[ 0.012871] Initializing cgroup subsys freezer
[ 0.012872] Initializing cgroup subsys net_cls
[ 0.012874] Initializing cgroup subsys blkio
[ 0.012898] tseg: 00bfe00000
[ 0.012900] CPU: Physical Processor ID: 0
[ 0.012901] CPU: Processor Core ID: 0
[ 0.012903] mce: CPU supports 6 MCE banks
[ 0.012910] using C1E aware idle routine
[ 0.014092] ACPI: Core revision 20110112
[ 0.020028] ftrace: allocating 24323 entries in 96 pages
[ 0.030071] Setting APIC routing to flat
[ 0.030450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138268] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
[ 0.140000] Performance Events: AMD PMU driver.
[ 0.140000] ... version: 0
[ 0.140000] ... bit width: 48
[ 0.140000] ... generic registers: 4
[ 0.140000] ... value mask: 0000ffffffffffff
[ 0.140000] ... max period: 00007fffffffffff
[ 0.140000] ... fixed-purpose events: 0
[ 0.140000] ... event mask: 000000000000000f
[ 0.140000] Booting Node 0, Processors #1
[ 0.300013] System has AMD C1E enabled
[ 0.300026] Switch to broadcast mode on CPU1
[ 0.300051] #2
[ 0.470016] Switch to broadcast mode on CPU2
[ 0.470054] #3
[ 0.640016] Switch to broadcast mode on CPU3
[ 0.640056] #4
[ 0.810019] Switch to broadcast mode on CPU4
[ 0.810064] #5
[ 0.980024] Brought up 6 CPUs
[ 0.980027] Total of 6 processors activated (38570.13 BogoMIPS).
[ 0.980023] Switch to broadcast mode on CPU5
[ 0.983612] Switch to broadcast mode on CPU0
[ 0.983612] devtmpfs: initialized
[ 0.983612] print_constraints: dummy:
[ 0.983612] Time: 14:22:36 Date: 08/14/11
[ 0.983612] NET: Registered protocol family 16
[ 0.983612] node 0 link 0: io port [a000, ffff]
[ 0.983612] TOM: 00000000c0000000 aka 3072M
[ 0.983612] Fam 10h mmconf [e0000000, e00fffff]
[ 0.983612] node 0 link 0: mmio [a0000, bffff]
[ 0.983612] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.983612] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.983612] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.983612] TOM2: 0000000240000000 aka 9216M
[ 0.983612] bus: [00, 05] on node 0 link 0
[ 0.983612] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.983612] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.983612] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.983612] bus: 00 index 3 [mem 0xe0600000-0xffffffff]
[ 0.983612] bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
[ 0.983612] bus: 00 index 5 [mem 0x240000000-0xfcffffffff]
[ 0.983612] Extended Config Space enabled on 1 nodes
[ 0.983612] ACPI: bus type pci registered
[ 0.983612] Trying to unpack rootfs image as initramfs...
[ 0.983612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.983612] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 1.001411] PCI: Using configuration type 1 for base access
[ 1.001856] bio: create slab at 0
[ 1.001856] ACPI: EC: Look up EC in DSDT
[ 1.001856] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.001856]
[ 1.001856] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.001856]
[ 1.001856] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.001856]
[ 1.001856] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.001856]
[ 1.005357] ACPI: Interpreter enabled
[ 1.005362] ACPI: (supports S0 S3 S4 S5)
[ 1.005376] ACPI: Using IOAPIC for interrupt routing
[ 1.226648] Freeing initrd memory: 18732k freed
[ 1.321513] ACPI: No dock devices found.
[ 1.321516] HEST: Table not found.
[ 1.321518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.321564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.321641] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.321643] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.321645] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.321647] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 1.321648] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 1.321660] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 1.321670] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 1.321698] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 1.321719] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.321722] pci 0000:00:02.0: PME# disabled
[ 1.321734] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 1.321755] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.321757] pci 0000:00:05.0: PME# disabled
[ 1.321770] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 1.321791] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.321793] pci 0000:00:0a.0: PME# disabled
[ 1.321815] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 1.321830] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 1.321837] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 1.321844] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 1.321851] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 1.321858] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 1.321865] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 1.321905] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 1.321915] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 1.321965] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 1.321978] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 1.322028] pci 0000:00:12.2: supports D1 D2
[ 1.322029] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.322032] pci 0000:00:12.2: PME# disabled
[ 1.322049] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 1.322058] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 1.322108] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 1.322122] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 1.322171] pci 0000:00:13.2: supports D1 D2
[ 1.322173] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.322176] pci 0000:00:13.2: PME# disabled
[ 1.322190] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 1.322245] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 1.322260] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 1.322301] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.322304] pci 0000:00:14.2: PME# disabled
[ 1.322314] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 1.322367] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 1.322395] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 1.322405] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 1.322454] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 1.322493] pci 0000:00:15.0: supports D1 D2
[ 1.322514] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 1.322524] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 1.322573] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 1.322587] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 1.322637] pci 0000:00:16.2: supports D1 D2
[ 1.322638] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 1.322641] pci 0000:00:16.2: PME# disabled
[ 1.322655] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 1.322667] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 1.322677] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 1.322688] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 1.322700] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 1.322741] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 1.322750] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 1.322759] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.322769] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 1.322775] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 1.322782] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 1.322820] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 1.322829] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 1.340024] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.340028] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 1.340031] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 1.340034] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.340067] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 1.340082] pci 0000:02:00.0: reg 10: [mem 0xfd8fe000-0xfd8fffff 64bit]
[ 1.340136] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.340139] pci 0000:02:00.0: PME# disabled
[ 1.360022] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.360026] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 1.360028] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 1.360031] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.360065] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 1.360077] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff]
[ 1.360096] pci 0000:03:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
[ 1.360109] pci 0000:03:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
[ 1.360117] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.360146] pci 0000:03:00.0: supports D1 D2
[ 1.360147] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.360150] pci 0000:03:00.0: PME# disabled
[ 1.380021] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.380025] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 1.380027] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.380030] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.380068] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 1.380087] pci 0000:04:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 1.380098] pci 0000:04:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 1.380163] pci 0000:04:0e.0: supports D1 D2
[ 1.380164] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 1.380168] pci 0000:04:0e.0: PME# disabled
[ 1.380195] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.380198] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.380201] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.380205] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 1.380207] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.380208] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.380210] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.380212] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 1.380214] pci 0000:00:14.4: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 1.380262] pci 0000:05:00.0: [197b:2363] type 0 class 0x000106
[ 1.380343] pci 0000:05:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 1.380382] pci 0000:05:00.0: PME# supported from D3hot
[ 1.380386] pci 0000:05:00.0: PME# disabled
[ 1.380412] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 1.380433] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 1.380446] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 1.380458] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 1.380470] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 1.380482] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 1.380545] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.380557] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.380561] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.380563] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.380568] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 1.380582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.380763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.380790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 1.380827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.380848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 1.380870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.380891] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.388464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388542] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388567] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388591] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388615] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388639] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 1.388714] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.388717] vgaarb: loaded
[ 1.388829] SCSI subsystem initialized
[ 1.388847] libata version 3.00 loaded.
[ 1.388847] usbcore: registered new interface driver usbfs
[ 1.388847] usbcore: registered new interface driver hub
[ 1.388847] usbcore: registered new device driver usb
[ 1.388847] wmi: Mapper loaded
[ 1.388847] PCI: Using ACPI for IRQ routing
[ 1.388847] PCI: pci_cache_line_size set to 64 bytes
[ 1.388847] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 1.388847] reserve RAM buffer: 000000000009a000 - 000000000009ffff
[ 1.388847] reserve RAM buffer: 00000000bfcf0000 - 00000000bfffffff
[ 1.388847] NetLabel: Initializing
[ 1.388847] NetLabel: domain hash size = 128
[ 1.388847] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.388847] NetLabel: unlabeled traffic allowed by default
[ 1.388847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.388847] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.391020] Switching to clocksource hpet
[ 1.395437] AppArmor: AppArmor Filesystem Enabled
[ 1.395453] pnp: PnP ACPI init
[ 1.395464] ACPI: bus type pnp registered
[ 1.395527] pnp 00:00: [bus 00-ff]
[ 1.395529] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.395530] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.395531] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.395533] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.395534] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 1.395536] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[ 1.395567] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.395574] pnp 00:01: [io 0x0010-0x001f]
[ 1.395575] pnp 00:01: [io 0x0022-0x003f]
[ 1.395576] pnp 00:01: [io 0x0044-0x005f]
[ 1.395577] pnp 00:01: [io 0x0062-0x0063]
[ 1.395579] pnp 00:01: [io 0x0065-0x006f]
[ 1.395580] pnp 00:01: [io 0x0074-0x007f]
[ 1.395581] pnp 00:01: [io 0x0091-0x0093]
[ 1.395582] pnp 00:01: [io 0x00a2-0x00bf]
[ 1.395583] pnp 00:01: [io 0x00e0-0x00ef]
[ 1.395585] pnp 00:01: [io 0x04d0-0x04d1]
[ 1.395586] pnp 00:01: [io 0x0220-0x0225]
[ 1.395587] pnp 00:01: [io 0x0290-0x0294]
[ 1.395626] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.395628] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.395630] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.395632] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.398674] Switched to NOHz mode on CPU #4
[ 1.398677] Switched to NOHz mode on CPU #3
[ 1.398686] Switched to NOHz mode on CPU #1
[ 1.398688] Switched to NOHz mode on CPU #5
[ 1.398691] Switched to NOHz mode on CPU #0
[ 1.398694] Switched to NOHz mode on CPU #2
[ 1.410405] pnp 00:02: [io 0x4100-0x411f]
[ 1.410407] pnp 00:02: [io 0x0228-0x022f]
[ 1.410409] pnp 00:02: [io 0x040b]
[ 1.410410] pnp 00:02: [io 0x04d6]
[ 1.410411] pnp 00:02: [io 0x0c00-0x0c01]
[ 1.410412] pnp 00:02: [io 0x0c14]
[ 1.410413] pnp 00:02: [io 0x0c50-0x0c52]
[ 1.410415] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 1.410416] pnp 00:02: [io 0x0c6f]
[ 1.410417] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 1.410418] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 1.410419] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 1.410420] pnp 00:02: [io 0x4000-0x40fe]
[ 1.410421] pnp 00:02: [io 0x4210-0x4217]
[ 1.410423] pnp 00:02: [io 0x0b00-0x0b0f]
[ 1.410424] pnp 00:02: [io 0x0b10-0x0b1f]
[ 1.410425] pnp 00:02: [io 0x0b20-0x0b3f]
[ 1.410426] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 1.410428] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 1.410432] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.410452] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 1.410457] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.410486] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.410488] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.410490] system 00:02: [io 0x040b] has been reserved
[ 1.410492] system 00:02: [io 0x04d6] has been reserved
[ 1.410494] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.410495] system 00:02: [io 0x0c14] has been reserved
[ 1.410497] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.410499] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.410500] system 00:02: [io 0x0c6f] has been reserved
[ 1.410502] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.410503] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.410506] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.410508] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.410510] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.410511] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 1.410513] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 1.410515] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 1.410517] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.410519] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.410580] pnp 00:03: [dma 4]
[ 1.410582] pnp 00:03: [io 0x0000-0x000f]
[ 1.410583] pnp 00:03: [io 0x0080-0x0090]
[ 1.410584] pnp 00:03: [io 0x0094-0x009f]
[ 1.410585] pnp 00:03: [io 0x00c0-0x00df]
[ 1.410605] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.410637] pnp 00:04: [io 0x0070-0x0073]
[ 1.410647] pnp 00:04: [irq 8]
[ 1.410665] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.410670] pnp 00:05: [io 0x0061]
[ 1.410689] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.410694] pnp 00:06: [io 0x00f0-0x00ff]
[ 1.410700] pnp 00:06: [irq 13]
[ 1.410717] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.410869] pnp 00:07: [mem 0xe0000000-0xefffffff]
[ 1.410905] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.410907] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.410997] pnp 00:08: [mem 0x000f0000-0x000f3fff]
[ 1.410999] pnp 00:08: [mem 0x000f4000-0x000f7fff]
[ 1.411000] pnp 00:08: [mem 0x000f8000-0x000fbfff]
[ 1.411001] pnp 00:08: [mem 0x000fc000-0x000fffff]
[ 1.411002] pnp 00:08: [mem 0xbfcf0000-0xbfcfffff]
[ 1.411004] pnp 00:08: [mem 0xffff0000-0xffffffff]
[ 1.411005] pnp 00:08: [mem 0x00000000-0x0009ffff]
[ 1.411007] pnp 00:08: [mem 0x00100000-0xbfceffff]
[ 1.411008] pnp 00:08: [mem 0xbfd00000-0xbfdfffff]
[ 1.411010] pnp 00:08: [mem 0xbfe00000-0xbfefffff]
[ 1.411011] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.411012] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 1.411015] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 1.411016] pnp 00:08: [mem 0xfff80000-0xfffeffff]
[ 1.411019] pnp 00:08: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411022] pnp 00:08: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411024] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411026] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411029] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411031] pnp 00:08: disabling [mem 0x00100000-0xbfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.411077] system 00:08: [mem 0xbfcf0000-0xbfcfffff] could not be reserved
[ 1.411078] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.411080] system 00:08: [mem 0xbfd00000-0xbfdfffff] has been reserved
[ 1.411082] system 00:08: [mem 0xbfe00000-0xbfefffff] could not be reserved
[ 1.411084] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.411086] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.411087] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.411089] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.411103] pnp: PnP ACPI: found 9 devices
[ 1.411104] ACPI: ACPI bus type pnp unregistered
[ 1.416654] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref]
[ 1.416656] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.416659] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 1.416661] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 1.416663] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.416666] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.416668] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 1.416670] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 1.416673] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.416676] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 1.416677] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.416679] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 1.416681] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.416684] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.416687] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.416689] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.416692] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.416695] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 1.416700] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.416702] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.416705] pci 0000:00:15.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.416708] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 1.416723] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.416726] pci 0000:00:02.0: setting latency timer to 64
[ 1.416734] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.416736] pci 0000:00:05.0: setting latency timer to 64
[ 1.416740] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.416742] pci 0000:00:0a.0: setting latency timer to 64
[ 1.416749] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.416751] pci 0000:00:15.0: setting latency timer to 64
[ 1.416754] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.416756] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.416757] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.416759] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.416760] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 1.416762] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.416763] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 1.416765] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.416767] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.416768] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 1.416770] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.416771] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.416773] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 1.416774] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.416776] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.416777] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[ 1.416779] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 1.416781] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.416782] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.416783] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.416785] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.416786] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff]
[ 1.416788] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 1.416790] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 1.416791] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 1.416817] NET: Registered protocol family 2
[ 1.416982] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.418114] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.420446] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.420735] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.420737] TCP reno registered
[ 1.420749] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.420797] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.420925] NET: Registered protocol family 1
[ 1.500175] pci 0000:01:00.0: Boot video device
[ 1.500220] PCI: CLS 4 bytes, default 64
[ 1.501555] PCI-DMA: Disabling AGP.
[ 1.503982] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.503984] PCI-DMA: using GART IOMMU.
[ 1.503986] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.507309] audit: initializing netlink socket (disabled)
[ 1.507323] type=2000 audit(1313331756.500:1): initialized
[ 1.517206] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.518361] VFS: Disk quotas dquot_6.5.2
[ 1.518394] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.518821] fuse init (API version 7.16)
[ 1.518873] msgmni has been set to 15996
[ 1.519090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.519119] io scheduler noop registered
[ 1.519121] io scheduler deadline registered
[ 1.519145] io scheduler cfq registered (default)
[ 1.519262] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.519290] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.519375] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.519393] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.519460] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.519478] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.519593] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.519608] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.519692] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.519696] ACPI: Power Button [PWRB]
[ 1.519730] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.519732] ACPI: Power Button [PWRF]
[ 1.519842] ACPI: acpi_idle registered with cpuidle
[ 1.519854] ACPI: processor limited to max C-state 1
[ 1.750712] ERST: Table is not found!
[ 1.960265] Linux agpgart interface v0.103
[ 1.960935] brd: module loaded
[ 1.961239] loop: module loaded
[ 1.961293] i2c-core: driver [adp5520] using legacy suspend method
[ 1.961294] i2c-core: driver [adp5520] using legacy resume method
[ 1.961448] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.961471] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 1.961483] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 1.961711] Fixed MDIO Bus: probed
[ 1.961728] PPP generic driver version 2.4.2
[ 1.961751] tun: Universal TUN/TAP device driver, 1.6
[ 1.961752] tun: (C) 1999-2004 Max Krasnyansky
[ 1.961801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.961842] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.961874] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.961925] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.040102] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.040105] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.040123] ehci_hcd 0000:00:12.2: debug port 1
[ 2.040146] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 2.060085] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.060171] hub 1-0:1.0: USB hub found
[ 2.060175] hub 1-0:1.0: 5 ports detected
[ 2.060300] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.060311] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.060337] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.060363] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.060366] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.060381] ehci_hcd 0000:00:13.2: debug port 1
[ 2.060390] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 2.080083] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.080158] hub 2-0:1.0: USB hub found
[ 2.080160] hub 2-0:1.0: 5 ports detected
[ 2.080282] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.080292] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.080319] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.080345] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.080348] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.080362] ehci_hcd 0000:00:16.2: debug port 1
[ 2.080372] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 2.100083] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.100157] hub 3-0:1.0: USB hub found
[ 2.100159] hub 3-0:1.0: 4 ports detected
[ 2.100229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.100296] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.100306] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.100332] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.100374] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 2.164178] hub 4-0:1.0: USB hub found
[ 2.164183] hub 4-0:1.0: 5 ports detected
[ 2.164321] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.164332] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.164358] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.164388] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 2.224164] hub 5-0:1.0: USB hub found
[ 2.224168] hub 5-0:1.0: 5 ports detected
[ 2.224305] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.224315] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.224345] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.224378] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 2.284162] hub 6-0:1.0: USB hub found
[ 2.284166] hub 6-0:1.0: 2 ports detected
[ 2.284299] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.284309] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.284333] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.284364] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 2.344167] hub 7-0:1.0: USB hub found
[ 2.344172] hub 7-0:1.0: 4 ports detected
[ 2.344247] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.344307] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.377717] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 2.377719] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.380091] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.500087] Refined TSC clocksource calibration: 3214.162 MHz.
[ 2.500096] Switching to clocksource tsc
[ 2.620143] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.620217] mousedev: PS/2 mouse device common for all mice
[ 2.620289] rtc_cmos 00:04: RTC can wake from S4
[ 2.620351] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.620376] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.620443] device-mapper: uevent: version 1.0.3
[ 2.620492] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.620560] device-mapper: multipath: version 1.2.0 loaded
[ 2.620562] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.620640] cpuidle: using governor ladder
[ 2.620641] cpuidle: using governor menu
[ 2.620791] TCP cubic registered
[ 2.620862] NET: Registered protocol family 10
[ 2.621188] NET: Registered protocol family 17
[ 2.621198] Registering the dns_resolver key type
[ 2.621252] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00)
[ 2.621259] powernow-k8: Core Performance Boosting: on.
[ 2.621282] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 2.621283] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 2.621284] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 2.621285] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.621699] PM: Hibernation image not present or could not be loaded.
[ 2.621705] registered taskstats version 1
[ 2.621937] Magic number: 7:371:384
[ 2.621941] usb usb2: hash matches
[ 2.621989] rtc_cmos 00:04: setting system clock to 2011-08-14 14:22:38 UTC (1313331758)
[ 2.621991] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.621992] EDD information not available.
[ 2.623149] Freeing unused kernel memory: 956k freed
[ 2.623336] Write protecting the kernel read-only data: 10240k
[ 2.623896] Freeing unused kernel memory: 184k freed
[ 2.627370] Freeing unused kernel memory: 1440k freed
[ 2.640400] udev[119]: starting version 167
[ 2.652268] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.652296] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.652299] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.652373] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.656640] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.656665] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.656699] r8169 0000:03:00.0: setting latency timer to 64
[ 2.656742] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.657082] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc900117a6000, 1c:6f:65:3e:fb:ce, XID 083000c0 IRQ 43
[ 2.662055] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.662081] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 2.662289] scsi0 : pata_jmicron
[ 2.662371] scsi1 : pata_jmicron
[ 2.662402] ata1: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 2.662404] ata2: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 2.664853] ahci 0000:00:11.0: version 3.0
[ 2.664872] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.664912] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 2.664994] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.664996] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.665726] scsi2 : ahci
[ 2.665919] scsi3 : ahci
[ 2.666018] scsi4 : ahci
[ 2.666553] scsi5 : ahci
[ 2.666610] scsi6 : ahci
[ 2.666668] scsi7 : ahci
[ 2.666757] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 44
[ 2.666760] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 44
[ 2.666763] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 44
[ 2.666765] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 44
[ 2.666767] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 44
[ 2.666770] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 44
[ 2.666865] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.690107] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.690111] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.690116] ahci 0000:05:00.0: setting latency timer to 64
[ 2.690370] scsi8 : ahci
[ 2.690421] scsi9 : ahci
[ 2.690453] ata9: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 17
[ 2.690456] ata10: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 17
[ 2.700363] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfd8fe000
[ 2.700416] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.700419] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.700423] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.700426] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.700429] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 2.700432] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 2.700435] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
[ 2.703723] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 2.703804] xHCI xhci_add_endpoint called for root hub
[ 2.703806] xHCI xhci_check_bandwidth called for root hub
[ 2.703826] hub 8-0:1.0: USB hub found
[ 2.703829] hub 8-0:1.0: 4 ports detected
[ 2.840715] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP21, 1.00, max UDMA/66
[ 2.880682] ata1.00: configured for UDMA/66
[ 2.882903] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP21 1.00 PQ: 0 ANSI: 5
[ 2.885046] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.885049] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.885142] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.885203] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.010097] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.010125] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.010151] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.010203] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.040132] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.040183] ata10: SATA link down (SStatus 0 SControl 300)
[ 3.120072] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 3.210091] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.210111] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.216232] ata5.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 3.216235] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.219892] ata3.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 3.219894] ata3.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.222378] ata5.00: configured for UDMA/133
[ 3.229891] ata3.00: configured for UDMA/133
[ 3.229993] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 3.230104] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.230117] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 3.230237] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 3.230270] sd 2:0:0:0: [sda] Write Protect is off
[ 3.230272] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.230301] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.230319] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.230332] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.230408] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.230410] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.230477] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.230936] sda: sda1 sda2 < sda5 >
[ 3.231176] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.241882] sdb: sdb1 sdb2 sdb3
[ 3.242152] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.243360] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.300175] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 3.323208] usbcore: registered new interface driver usbhid
[ 3.323210] usbhid: USB HID core driver
[ 3.380182] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input2
[ 3.380256] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0
[ 3.387170] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 3.387556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input3
[ 3.387673] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1
[ 3.430140] usb 8-3: new high speed USB device using xhci_hcd and address 2
[ 3.451485] usb 8-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[ 3.451488] usb 8-3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 3.451729] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.452104] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.452479] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.453355] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.570094] usb 8-4: new high speed USB device using xhci_hcd and address 3
[ 3.591981] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.592479] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.592979] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.593480] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.594481] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.594855] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 3.596784] usbcore: registered new interface driver uas
[ 3.599786] Initializing USB Mass Storage driver...
[ 3.599904] scsi10 : usb-storage 8-4:1.0
[ 3.599973] usbcore: registered new interface driver usb-storage
[ 3.599974] USB Mass Storage support registered.
[ 3.677033] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.800179] firewire_core: created device fw0: GUID 003a3d9f001c6f65, S400
[ 3.917926] udev[410]: starting version 167
[ 3.937848] lp: driver loaded but no devices found
[ 3.945938] nvidia: module license 'NVIDIA' taints kernel.
[ 3.945941] Disabling lock debugging due to kernel taint
[ 3.956301] type=1400 audit(1313331759.824:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=495 comm="apparmor_parser"
[ 3.956581] type=1400 audit(1313331759.824:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser"
[ 3.956751] type=1400 audit(1313331759.824:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser"
[ 3.962175] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 3.962178] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.962939] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 3.963001] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 3.971020] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.985693] MCE: In-kernel MCE decoding enabled.
[ 3.998731] IR NEC protocol handler initialized
[ 4.001667] IR RC5(x) protocol handler initialized
[ 4.001674] EDAC MC: Ver: 2.1.0 Jun 28 2011
[ 4.002037] dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
[ 4.004441] IR RC6 protocol handler initialized
[ 4.006230] EDAC amd64_edac: v3.3.0
[ 4.006272] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.006285] EDAC amd64: DRAM ECC disabled.
[ 4.006291] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.006292] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.006293] (Note that use of the override may cause unknown side effects.)
[ 4.006506] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)
[ 4.007112] DVB: registering adapter 0 frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)...
[ 4.008250] IR JVC protocol handler initialized
[ 4.008290] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:05.0/0000:02:00.0/usb8/8-3/input/input4
[ 4.008350] dvb-usb: schedule remote query interval to 50 msecs.
[ 4.008974] dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected.
[ 4.009000] usbcore: registered new interface driver cinergyT2
[ 4.010443] IR Sony protocol handler initialized
[ 4.021265] lirc_dev: IR Remote Control driver registered, major 249
[ 4.022048] IR LIRC bridge handler initialized
[ 4.040908] Linux video capture interface: v2.00
[ 4.045460] uvcvideo: Found UVC 1.00 device (046d:081b)
[ 4.060491] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input5
[ 4.060548] usbcore: registered new interface driver uvcvideo
[ 4.060549] USB Video Class driver (v1.0.0)
[ 4.068484] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.166285] hda_codec: ALC892: BIOS auto-probing.
[ 4.176468] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.176653] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.176656] hda_intel: Disable MSI for Nvidia chipset
[ 4.176716] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.380976] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.518250] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.590626] scsi 10:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
[ 4.591030] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 4.613502] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.643071] type=1400 audit(1313331760.514:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser"
[ 4.643090] type=1400 audit(1313331760.514:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=817 comm="apparmor_parser"
[ 4.643113] type=1400 audit(1313331760.514:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=818 comm="apparmor_parser"
[ 4.643262] type=1400 audit(1313331760.514:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=817 comm="apparmor_parser"
[ 4.643284] type=1400 audit(1313331760.514:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=818 comm="apparmor_parser"
[ 4.643516] type=1400 audit(1313331760.514:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=816 comm="apparmor_parser"
[ 4.783468] r8169 0000:03:00.0: eth0: link down
[ 4.783481] r8169 0000:03:00.0: eth0: link down
[ 4.784238] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.818514] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 4.822567] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 4.823874] EXT4-fs (sdb2): re-mounted. Opts: commit=0
[ 4.826112] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[ 5.080141] 2:3:1: cannot get freq at ep 0x86
[ 5.246511] usbcore: registered new interface driver snd-usb-audio
[ 6.819246] r8169 0000:03:00.0: eth0: link up
[ 6.819902] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.002824] sd 10:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 7.003018] sd 10:0:0:0: [sdc] Write Protect is off
[ 7.003020] sd 10:0:0:0: [sdc] Mode Sense: 1c 00 00 00
[ 7.003022] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.003601] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.013505] sdc: sdc1
[ 7.014096] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 7.014098] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 8.130487] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.130496] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.130500] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.130663] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
[ 8.263367] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90013e80000, using 1216k, total 1216k
[ 8.263370] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 8.263372] vesafb: scrolling: redraw
[ 8.263374] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 8.263512] Console: switching to colour frame buffer device 80x30
[ 8.266386] ppdev: user-space parallel port driver
[ 8.267215] fb0: VESA VGA frame buffer device
[ 8.273058] audit_printk_skb: 12 callbacks suppressed
[ 8.273061] type=1400 audit(1313331764.144:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1225 comm="apparmor_parser"
[ 8.273381] type=1400 audit(1313331764.144:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1225 comm="apparmor_parser"
[ 8.296963] Intel AES-NI instructions are not detected.
[ 8.339353] ioremap error for 0xbfcf1000-0xbfcf2000, requested 0x10, got 0x0
[ 8.360925] padlock_aes: VIA PadLock not detected.
[ 8.617270] padlock_sha: VIA PadLock Hash Engine not detected.
[ 8.737736] Adding 8383484k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8383484k
[ 15.789584] ecryptfs_parse_options: eCryptfs: unrecognized option [ecryptfs_check_dev_ruid]
[ 17.019089] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.020960] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 17.022340] EXT4-fs (sdb2): re-mounted. Opts: commit=0
[ 17.023705] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[ 17.820022] eth0: no IPv6 routers present
[ 19.419750] Valid eCryptfs headers not found in file header region or xattr region
[ 19.419753] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[ 19.428785] Valid eCryptfs headers not found in file header region or xattr region
[ 19.428788] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[ 21.953266] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[ 59.540749] vlc[1818]: segfault at 1a00000009 ip 00007fe9c16b4caa sp 00007fe9865c89b0 error 4 in libQtCore.so.4.7.2[7fe9c15f2000+283000]
[ 523.437281] vlc[2129]: segfault at 7ff4d80 ip 00007fc535a3afc5 sp 00007fc536d38900 error 4 in libkdecore.so.5.6.0[7fc535854000+2b9000]
[ 1455.255202] vlc[2602]: segfault at a0000000a ip 00007fdcc79a9caa sp 00007fdc8c7bc9b0 error 4 in libQtCore.so.4.7.2[7fdcc78e7000+283000]
[ 1880.876532] vlc[2986]: segfault at 8 ip 00007f0150938aab sp 00007fff1c0881a8 error 4 in libQtDBus.so.4.7.2[7f01508f8000+75000]
[ 2067.317601] exe (3297): /proc/3297/oom_adj is deprecated, please use /proc/3297/oom_score_adj instead.
[ 2237.617977] compat_ioctl32: unknown ioctl 'v', dir=2, #1 (0x803c7601)
[ 2237.617996] ioctl32(TeamViewer.exe:3535): Unknown cmd fd(30) cmd(803c7601){t:'v';sz:60} arg(0033d36c) on /dev/video0
[ 3530.412082] i2c /dev entries driver