dmesg - TestRun1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-131.2.1.el6.x86_64 (mockbuild@x86-003.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed May 18 07:07:37 EDT 2011
Command line: ro root=/dev/mapper/vg_virtkvm01-lv_root rd_LVM_LV=vg_virtkvm01/lv_root rd_LVM_LV=vg_virtkvm01/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
BIOS-e820: 00000000cfe90000 - 00000000cfe9e000 (ACPI data)
BIOS-e820: 00000000cfe9e000 - 00000000cfee0000 (ACPI NVS)
BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
DMI present.
SMBIOS version 2.5 @ 0xFB4B0
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x420000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfe90000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfe00000 page 2M
00cfe00000 - 00cfe90000 page 4k
kernel direct mapping tables up to cfe90000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000420000000
0100000000 - 0400000000 page 1G
0400000000 - 0420000000 page 2M
kernel direct mapping tables up to 420000000 @ 12000-14000
RAMDISK: 371f1000 - 37feff5b
ACPI: RSDP 00000000000fab90 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cfe90000 00040 (v01 7596MS A7596100 20110228 MSFT 00000097)
ACPI: FACP 00000000cfe90200 00084 (v01 7596MS A7596100 20110228 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
ACPI: DSDT 00000000cfe905d0 09315 (v01 A7596 A7596100 00000100 INTL 20051117)
ACPI: FACS 00000000cfe9e000 00040
ACPI: APIC 00000000cfe90390 0007C (v01 7596MS A7596100 20110228 MSFT 00000097)
ACPI: MCFG 00000000cfe90410 0003C (v01 7596MS OEMMCFG 20110228 MSFT 00000097)
ACPI: OEMB 00000000cfe9e040 00072 (v01 7596MS A7596100 20110228 MSFT 00000097)
ACPI: SRAT 00000000cfe9a5d0 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cfe9a6c0 00038 (v01 7596MS OEMHPET 20110228 MSFT 00000097)
ACPI: SSDT 00000000cfe9a700 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d0000000
SRAT: Node 0 PXM 0 100000000-430000000
NUMA: Allocated memnodemap from 13000 - 1b640
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000420000000
NODE_DATA [000000000001b640 - 000000000004f63f]
bootmap [0000000000100000 - 0000000000183fff] pages 84
(9 early reservations) ==> bootmem [0000000000 - 0420000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001f474e4] TEXT DATA BSS ==> [0001000000 - 0001f474e4]
#3 [00371f1000 - 0037feff5b] RAMDISK ==> [00371f1000 - 0037feff5b]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001f48000 - 0001f48173] BRK ==> [0001f48000 - 0001f48173]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
#8 [0000013000 - 000001b640] MEMNODEMAP ==> [0000013000 - 000001b640]
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 16896MB)
[ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff8800363fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00420000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cfe90
0: 0x00100000 -> 0x00420000
On node 0 totalpages: 4128287
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3817 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833224 pages, LIFO batch:31
Normal zone: 44800 pages used for memmap
Normal zone: 3232000 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe90000 - 00000000cfe9e000
PM: Registered nosave memory: 00000000cfe9e000 - 00000000cfee0000
PM: Registered nosave memory: 00000000cfee0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92504 r8192 d22184 u262144
pcpu-alloc: s92504 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4069041
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_virtkvm01-lv_root rd_LVM_LV=vg_virtkvm01/lv_root rd_LVM_LV=vg_virtkvm01/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=129M@0M rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 16056840k/17301504k available (5011k kernel code, 788356k absent, 456308k reserved, 6908k data, 1232k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:456
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 165150720 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 3399.848 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.69 BogoMIPS (lpj=3399848)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20700 entries in 82 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
#2
Switch to broadcast mode on CPU2
#3
Brought up 4 CPUs
Total of 4 processors activated (27200.98 BogoMIPS).
Switch to broadcast mode on CPU3
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
Switch to broadcast mode on CPU0
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe8fffff]
node 0 link 0: mmio [fe900000, feafffff]
node 0 link 0: mmio [feb00000, ffefffff]
TOM2: 0000000430000000 aka 17152M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [d0000000, dfffffff]
bus: 00 index 3 mmio: [f0000000, ffffffff]
bus: 00 index 4 mmio: [430000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81f08530), AE_NOT_FOUND
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 55, should be 50 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007]
pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003]
pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007]
pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003]
pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff]
pci 0000:00:12.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xfe8ff800-0xfe8ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8f7000-0xfe8f7fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8ff400-0xfe8ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f0000-0xfe8f3fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10 32bit mmio: [0xfe8f6000-0xfe8f6fff]
pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xfeaf0000-0xfeafffff]
pci 0000:01:05.0: reg 24 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: reg 10 32bit mmio: [0xfeae8000-0xfeaebfff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:05.0: bridge io port: [0xe000-0xefff]
pci 0000:00:05.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:00:14.4: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x40b-0x40b has been reserved
system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
system 00:0a: ioport range 0xc00-0xc01 has been reserved
system 00:0a: ioport range 0xc14-0xc14 has been reserved
system 00:0a: ioport range 0xc50-0xc51 has been reserved
system 00:0a: ioport range 0xc52-0xc52 has been reserved
system 00:0a: ioport range 0xc6c-0xc6c has been reserved
system 00:0a: ioport range 0xc6f-0xc6f has been reserved
system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
system 00:0a: ioport range 0xcd8-0xcdf has been reserved
system 00:0a: ioport range 0x800-0x89f has been reserved
system 00:0a: ioport range 0xb00-0xb0f has been reserved
system 00:0a: ioport range 0xb20-0xb3f has been reserved
system 00:0a: ioport range 0x900-0x90f has been reserved
system 00:0a: ioport range 0x910-0x91f has been reserved
system 00:0a: ioport range 0xfe00-0xfefe has been reserved
system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
system 00:0b: ioport range 0xe80-0xf5f has been reserved
system 00:0b: ioport range 0xae0-0xaef has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xcfefffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [0xd000-0xdfff]
pci 0000:00:01.0: bridge window [0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [0xd0000000-0xdfffffff]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
pci 0000:00:05.0: bridge window [0xe000-0xefff]
pci 0000:00:05.0: bridge window [0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge window [0xfdf00000-0xfdffffff]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:05.0: PCIe errors handled by OS.
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14331k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1309366835.618:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31389
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CF01830EC3D9172B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:05.0: PCIe errors handled by OS.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8f6000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-131.2.1.el6.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2011-06-29 17:00:36 UTC (1309366836)
Initalizing network drop monitor service
Freeing unused kernel memory: 1232k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1112k freed
Freeing unused kernel memory: 1796k freed
dracut: dracut-004-53.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS780 0x1002:0x9616).
[drm] register mmio base: 0xFEAF0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 8037656 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
radeon 0000:01:05.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
usb 4-3: new low speed USB device using ohci_hcd and address 2
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.7.0 20080528 for 0000:01:05.0 on minor 0
dracut: Starting plymouth daemon
usb 4-3: New USB device found, idVendor=413c, idProduct=2106
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Dell QuietKey Keyboard
usb 4-3: Manufacturer: Dell
usb 4-3: configuration #1 chosen from 1 choice
input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3
generic-usb 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:12.1-3/input0
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.0: version 3.0
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:11.0: irq 25 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 25
ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 25
ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 25
ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 25
ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 25
ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 25
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST1000DL002-9TT153, CC98, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48
ata1.00: ATA-8: ST1000DL002-9TT153, CC98, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DL002-9TT1 CC98 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST1000DL002-9TT1 CC98 PQ: 0 ANSI: 5
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1 sda2 < sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI disk
sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda5 sdb2 for LVM logical volumes vg_virtkvm01/lv_root vg_virtkvm01/lv_swap
dracut: inactive '/dev/vg_virtkvm01/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_virtkvm01/lv_home' [863.55 GiB] inherit
dracut: inactive '/dev/vg_virtkvm01/lv_swap' [17.47 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_virtkvm01-lv_root
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1309366838.719:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 147
shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
shpchp 0000:00:01.0: Cannot reserve MMIO region
shpchp 0000:00:05.0: HPC vendor_id 1022 device_id 9605 ss_vid 0 ss_did 0
shpchp 0000:00:05.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC889: BIOS auto-probing.
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:05.1: setting latency timer to 64
EDAC MC: Ver: 2.1.0 May 18 2011
EDAC amd64_edac: Ver: 3.3.0 May 18 2011
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU0: patch_level=0x10000c8
microcode: CPU1: patch_level=0x10000c8
microcode: CPU2: patch_level=0x10000c8
microcode: CPU3: patch_level=0x10000c8
Microcode Update Driver: v2.00 , Peter Oruba
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
r8169 0000:02:00.0: irq 26 for MSI/MSI-X
eth0: RTL8168d/8111d at 0xffffc9001262e000, 6c:62:6d:43:23:d2, XID 081000c0 IRQ 26
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
microcode: AMD microcode update via /dev/cpu/microcode not supported
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sdb1): mounted filesystem with ordered data mode
EXT4-fs (dm-5): mounted filesystem with ordered data mode
Adding 18317304k swap on /dev/mapper/vg_virtkvm01-lv_swap. Priority:-1 extents:1 across:18317304k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Bridge firewalling registered
r8169 0000:02:00.0: eth0: link up
r8169 0000:02:00.0: eth0: link up
device eth0 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3400 MHz)
powernow-k8: 1 : pstate 1 (2700 MHz)
powernow-k8: 2 : pstate 2 (2200 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
br0: no IPv6 routers present
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering forwarding state
vnet1: no IPv6 routers present
kvm: 3522: cpu0 unhandled rdmsr: 0xc0010001
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering forwarding state
vnet1: no IPv6 routers present
kvm: 3772: cpu0 unhandled rdmsr: 0xc0010001
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering forwarding state
vnet1: no IPv6 routers present
kvm: 4051: cpu0 unhandled rdmsr: 0xc0010001
kvm: 4051: cpu0 unhandled rdmsr: 0xc0010001
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering forwarding state
kvm: 30539: cpu0 unhandled rdmsr: 0xc0010001
vnet1: no IPv6 routers present
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering forwarding state
kvm: 9249: cpu0 unhandled rdmsr: 0xc0010001
vnet1: no IPv6 routers present
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
kvm: 13182: cpu0 unhandled rdmsr: 0xc0010001
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
kvm: 13921: cpu0 unhandled rdmsr: 0xc0010001
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
kvm: 15821: cpu0 unhandled rdmsr: 0xc0010001
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering forwarding state
kvm: 19312: cpu0 unhandled rdmsr: 0xc0010001
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
ip_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
lo: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
ISO 9660 Extensions: RRIP_1991A
orion_linux_x86[30195] trap divide error ip:cd081f sp:7fff46931d70 error:0 in orion_linux_x86-64[400000+1f31000]
EXT4-fs (dm-5): mounted filesystem with ordered data mode