dmesg - build-apache
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-virtual (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 04:06:34 UTC 2011 (Ubuntu 2.6.38-8.42-virtual 2.6.38.2)
[ 0.000000] Command line: root=/dev/vda console=ttyS0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffb000 (usable)
[ 0.000000] BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0xdfffb max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f8940] f8940
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffb000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfffb000 page 4k
[ 0.000000] kernel direct mapping tables up to dfffb000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ dfff1000-dfffb000
[ 0.000000] ACPI: RSDP 00000000000f88f0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffdd70 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dffffdf0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffdf50 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 00000000dffffd80 00040
[ 0.000000] ACPI: SSDT 00000000dfffdef0 0005E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dfffddf0 0008A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dfffddb0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] kvm-clock: Using msrs 12 and 11
[ 0.000000] kvm-clock: cpu 0, msr 0:1adca81, boot clock
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfffb
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2097034
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899123 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fffbc000
[ 0.000000] PM: Registered nosave memory: 00000000fffbc000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ffbc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800dfc00000 s83840 r8192 d22656 u524288
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] kvm-clock: cpu 0, msr 0:dfc13a81, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066564
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/vda console=ttyS0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8191276k/8912896k available (6041k kernel code, 524760k absent, 196860k reserved, 4997k data, 880k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2133.462 MHz processor.
[ 0.120000] Calibrating delay loop (skipped) preset value.. 4266.92 BogoMIPS (lpj=21334620)
[ 0.120000] pid_max: default: 32768 minimum: 301
[ 0.120000] Security Framework initialized
[ 0.120000] AppArmor: AppArmor initialized
[ 0.120000] Yama: becoming mindful.
[ 0.120000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.122490] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.127513] Mount-cache hash table entries: 256
[ 0.128332] Initializing cgroup subsys ns
[ 0.128857] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.130008] Initializing cgroup subsys cpuacct
[ 0.130575] Initializing cgroup subsys memory
[ 0.131148] Initializing cgroup subsys devices
[ 0.131710] Initializing cgroup subsys freezer
[ 0.132265] Initializing cgroup subsys net_cls
[ 0.132826] Initializing cgroup subsys blkio
[ 0.133485] mce: CPU supports 10 MCE banks
[ 0.143017] ACPI: Core revision 20110112
[ 0.144416] ftrace: allocating 24682 entries in 97 pages
[ 0.150203] Setting APIC routing to flat
[ 0.151968] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152725] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03
[ 0.170000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.170000] Booting Node 0, Processors #1
[ 0.120000] kvm-clock: cpu 1, msr 0:dfc93a81, secondary cpu clock
[ 0.190239] #2
[ 0.120000] kvm-clock: cpu 2, msr 0:dfd13a81, secondary cpu clock
[ 0.220266] #3 Ok.
[ 0.120000] kvm-clock: cpu 3, msr 0:dfd93a81, secondary cpu clock
[ 0.250029] Brought up 4 CPUs
[ 0.250031] Total of 4 processors activated (17067.69 BogoMIPS).
[ 0.260092] devtmpfs: initialized
[ 0.261690] print_constraints: dummy:
[ 0.261690] Time: 9:47:34 Date: 06/24/11
[ 0.262062] NET: Registered protocol family 16
[ 0.262815] ACPI: bus type pci registered
[ 0.263443] PCI: Using configuration type 1 for base access
[ 0.264294] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.265071] mtrr: your CPUs had inconsistent MTRRdefType settings
[ 0.265830] mtrr: probably your BIOS does not setup all CPUs.
[ 0.266549] mtrr: corrected configuration.
[ 0.270065] bio: create slab at 0
[ 0.270965] ACPI: EC: Look up EC in DSDT
[ 0.272400] ACPI: Interpreter enabled
[ 0.272874] ACPI: (supports S0 S3 S4 S5)
[ 0.273427] ACPI: Using IOAPIC for interrupt routing
[ 0.273427] ACPI: No dock devices found.
[ 0.273472] HEST: Table not found.
[ 0.273902] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.275094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.275902] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.275905] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.275908] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.275910] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.275947] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.276210] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.276602] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.276863] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.277031] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.277292] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.277455] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.277806] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.278701] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.280113] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.286166] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe1ffffff pref]
[ 0.288055] pci 0000:00:02.0: reg 14: [mem 0xe2000000-0xe2000fff]
[ 0.296926] pci 0000:00:02.0: reg 30: [mem 0xe2010000-0xe201ffff pref]
[ 0.297223] pci 0000:00:03.0: [10ec:8139] type 0 class 0x000200
[ 0.297369] pci 0000:00:03.0: reg 10: [io 0xc100-0xc1ff]
[ 0.297486] pci 0000:00:03.0: reg 14: [mem 0xe2020000-0xe20200ff]
[ 0.298170] pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100
[ 0.298306] pci 0000:00:04.0: reg 10: [io 0xc200-0xc23f]
[ 0.298395] pci 0000:00:04.0: reg 14: [mem 0xe2021000-0xe2021fff]
[ 0.298995] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[ 0.299143] pci 0000:00:05.0: reg 10: [io 0xc240-0xc27f]
[ 0.299233] pci 0000:00:05.0: reg 14: [mem 0xe2022000-0xe2022fff]
[ 0.300509] pci 0000:00:06.0: [1af4:1002] type 0 class 0x000500
[ 0.300579] pci 0000:00:06.0: reg 10: [io 0xc280-0xc29f]
[ 0.301128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.304824] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.305716] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.306551] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.307384] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.308527] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.309513] vgaarb: loaded
[ 0.310323] SCSI subsystem initialized
[ 0.310878] libata version 3.00 loaded.
[ 0.310878] usbcore: registered new interface driver usbfs
[ 0.310878] usbcore: registered new interface driver hub
[ 0.311492] usbcore: registered new device driver usb
[ 0.311492] wmi: Mapper loaded
[ 0.311492] PCI: Using ACPI for IRQ routing
[ 0.311492] PCI: pci_cache_line_size set to 64 bytes
[ 0.311492] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.311492] reserve RAM buffer: 00000000dfffb000 - 00000000dfffffff
[ 0.311492] NetLabel: Initializing
[ 0.311869] NetLabel: domain hash size = 128
[ 0.312384] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.313031] NetLabel: unlabeled traffic allowed by default
[ 0.313796] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.314679] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.315335] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.330053] Switching to clocksource kvm-clock
[ 0.344713] Switched to NOHz mode on CPU #1
[ 0.346386] Switched to NOHz mode on CPU #2
[ 0.349191] Switched to NOHz mode on CPU #3
[ 0.349402] Switched to NOHz mode on CPU #0
[ 0.355071] AppArmor: AppArmor Filesystem Enabled
[ 0.355763] pnp: PnP ACPI init
[ 0.356195] ACPI: bus type pnp registered
[ 0.356748] pnp 00:00: [bus 00-ff]
[ 0.356751] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.356753] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.356755] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.356757] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.356760] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.356809] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.356871] pnp 00:01: [io 0x0070-0x0071]
[ 0.356916] pnp 00:01: [irq 8]
[ 0.356918] pnp 00:01: [io 0x0072-0x0077]
[ 0.356966] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.357024] pnp 00:02: [io 0x0060]
[ 0.357026] pnp 00:02: [io 0x0064]
[ 0.357047] pnp 00:02: [irq 1]
[ 0.357081] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.357124] pnp 00:03: [irq 12]
[ 0.357193] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.357219] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.357221] pnp 00:04: [io 0x03f7]
[ 0.357243] pnp 00:04: [irq 6]
[ 0.357245] pnp 00:04: [dma 2]
[ 0.357278] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.357384] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.357430] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.357550] pnp: PnP ACPI: found 6 devices
[ 0.358122] ACPI: ACPI bus type pnp unregistered
[ 0.365792] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.365795] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 0.365873] NET: Registered protocol family 2
[ 0.366818] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.371342] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.380735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.382623] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.383467] TCP reno registered
[ 0.383882] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.384827] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.385946] NET: Registered protocol family 1
[ 0.386547] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.387374] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.388121] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.389027] pci 0000:00:02.0: Boot video device
[ 0.389070] PCI: CLS 0 bytes, default 64
[ 0.389085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389992] Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
[ 0.391233] software IO TLB at phys 0xdbc00000 - 0xdfc00000
[ 0.392607] audit: initializing netlink socket (disabled)
[ 0.393270] type=2000 audit(1308908855.390:1): initialized
[ 0.417416] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.420550] VFS: Disk quotas dquot_6.5.2
[ 0.421109] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.422775] fuse init (API version 7.16)
[ 0.423384] msgmni has been set to 15998
[ 0.424600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.425600] io scheduler noop registered
[ 0.426075] io scheduler deadline registered (default)
[ 0.426740] io scheduler cfq registered
[ 0.427333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.428020] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.429002] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.430096] ACPI: Power Button [PWRF]
[ 0.431272] ACPI: acpi_idle registered with cpuidle
[ 0.432237] ERST: Table is not found!
[ 0.432869] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.433579] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 0.434609] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.434825] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.435531] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.436566] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.436742] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.437428] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
[ 0.438485] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 0.461067] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.611675] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.990479] Linux agpgart interface v0.103
[ 0.993050] brd: module loaded
[ 0.994544] loop: module loaded
[ 0.995464] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.995494] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.997002] vda: unknown partition table
[ 0.998002] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.998031] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
[ 0.999002] vdb: unknown partition table
[ 0.999831] i2c-core: driver [adp5520] using legacy suspend method
[ 1.000880] i2c-core: driver [adp5520] using legacy resume method
[ 1.002009] ata_piix 0000:00:01.1: version 2.13
[ 1.002104] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.002874] scsi0 : ata_piix
[ 1.003645] scsi1 : ata_piix
[ 1.004195] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.005266] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.007020] Fixed MDIO Bus: probed
[ 1.007804] PPP generic driver version 2.4.2
[ 1.009013] tun: Universal TUN/TAP device driver, 1.6
[ 1.009846] tun: (C) 1999-2004 Max Krasnyansky
[ 1.011056] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.012108] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.013117] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.014210] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.015549] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.015566] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.016498] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.017820] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 1.019057] hub 1-0:1.0: USB hub found
[ 1.019596] hub 1-0:1.0: 2 ports detected
[ 1.020274] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.022037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.022740] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.023587] mousedev: PS/2 mouse device common for all mice
[ 1.025074] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.026826] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.027866] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.029469] device-mapper: uevent: version 1.0.3
[ 1.030504] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.032317] device-mapper: multipath: version 1.2.0 loaded
[ 1.033298] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.034864] cpuidle: using governor ladder
[ 1.035545] cpuidle: using governor menu
[ 1.036674] TCP cubic registered
[ 1.037474] NET: Registered protocol family 10
[ 1.039206] NET: Registered protocol family 17
[ 1.040046] Registering the dns_resolver key type
[ 1.041324] PM: Hibernation image not present or could not be loaded.
[ 1.041353] registered taskstats version 1
[ 1.042361] Magic number: 15:990:778
[ 1.043213] rtc_cmos 00:01: setting system clock to 2011-06-24 09:47:35 UTC (1308908855)
[ 1.044583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.045619] EDD information not available.
[ 1.160422] md: Waiting for all devices to be available before autodetect
[ 1.161559] md: If you don't use raid, use raid=noautodetect
[ 1.162782] md: Autodetecting RAID arrays.
[ 1.163485] md: Scanned 0 and added 0 devices.
[ 1.164238] md: autorun ...
[ 1.164694] md: ... autorun DONE.
[ 1.165605] EXT3-fs (vda): error: couldn't mount because of unsupported optional features (240)
[ 1.230267] EXT2-fs (vda): error: couldn't mount because of unsupported optional features (244)
[ 1.270694] EXT4-fs (vda): INFO: recovery required on readonly filesystem
[ 1.271889] EXT4-fs (vda): write access will be enabled during recovery
[ 1.400078] Refined TSC clocksource calibration: 2133.445 MHz.
[ 1.634171] EXT4-fs (vda): recovery complete
[ 1.643597] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
[ 1.644923] VFS: Mounted root (ext4 filesystem) readonly on device 252:0.
[ 1.646317] devtmpfs: mounted
[ 1.650052] Freeing unused kernel memory: 880k freed
[ 1.651602] Write protecting the kernel read-only data: 10240k
[ 1.653408] Freeing unused kernel memory: 84k freed
[ 1.661059] Freeing unused kernel memory: 1416k freed
[ 1.782632] udev[107]: starting version 167
[ 1.801115] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.801205] acpiphp: Slot [1] registered
[ 1.801225] acpiphp: Slot [2] registered
[ 1.801241] acpiphp: Slot [3] registered
[ 1.801258] acpiphp: Slot [4] registered
[ 1.801274] acpiphp: Slot [5] registered
[ 1.801291] acpiphp: Slot [6] registered
[ 1.801307] acpiphp: Slot [7] registered
[ 1.801324] acpiphp: Slot [8] registered
[ 1.801344] acpiphp: Slot [9] registered
[ 1.801386] acpiphp: Slot [10] registered
[ 1.801403] acpiphp: Slot [11] registered
[ 1.801420] acpiphp: Slot [12] registered
[ 1.801437] acpiphp: Slot [13] registered
[ 1.801454] acpiphp: Slot [14] registered
[ 1.801471] acpiphp: Slot [15] registered
[ 1.801490] acpiphp: Slot [16] registered
[ 1.801506] acpiphp: Slot [17] registered
[ 1.801523] acpiphp: Slot [18] registered
[ 1.801539] acpiphp: Slot [19] registered
[ 1.801557] acpiphp: Slot [20] registered
[ 1.801574] acpiphp: Slot [21] registered
[ 1.801591] acpiphp: Slot [22] registered
[ 1.801607] acpiphp: Slot [23] registered
[ 1.801627] acpiphp: Slot [24] registered
[ 1.801643] acpiphp: Slot [25] registered
[ 1.801659] acpiphp: Slot [26] registered
[ 1.801675] acpiphp: Slot [27] registered
[ 1.801691] acpiphp: Slot [28] registered
[ 1.801707] acpiphp: Slot [29] registered
[ 1.801725] acpiphp: Slot [30] registered
[ 1.801741] acpiphp: Slot [31] registered
[ 1.849986] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.850383] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.850390] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 1.854176] 8139cp 0000:00:03.0: eth0: RTL-8139C+ at 0xffffc9000176e000, 02:16:3e:0f:32:c4, IRQ 11
[ 1.854235] 8139cp 0000:00:03.0: setting latency timer to 64
[ 1.865013] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.876286] FDC 0 is a S82078B
[ 1.901935] EXT4-fs (vda): re-mounted. Opts: (null)
[ 1.926979] type=1400 audit(1308908856.373:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=214 comm="apparmor_parser"
[ 1.927698] type=1400 audit(1308908856.373:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=214 comm="apparmor_parser"
[ 1.928153] type=1400 audit(1308908856.373:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=214 comm="apparmor_parser"
[ 2.236890] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 2.378463] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 11.826519] type=1400 audit(1308908866.273:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=400 comm="apparmor_parser"
[ 11.826719] type=1400 audit(1308908866.273:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=401 comm="apparmor_parser"
[ 11.827409] type=1400 audit(1308908866.273:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=400 comm="apparmor_parser"
[ 11.827930] type=1400 audit(1308908866.273:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=400 comm="apparmor_parser"
[ 13.130066] eth0: no IPv6 routers present