dmesg - pathscale
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) ([email protected]) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/linux-debian ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
[ 0.000000] BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
[ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770TA-UD3/GA-770TA-UD3, BIOS F2 12/25/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4520] f4520
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfd81000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfd81000 page 4k
[ 0.000000] kernel direct mapping tables up to cfd81000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cfd7f000-cfd81000
[ 0.000000] RAMDISK: 368fa000 - 37475000
[ 0.000000] ACPI: RSDP 00000000000f5f30 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfde30c0 0739D (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfde0000 00040
[ 0.000000] ACPI: SSDT 00000000cfdea540 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfdeae00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdeae40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfdeae80 0038A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfdea480 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x000cfd81
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047817
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832953 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000
[ 0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
[ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
[ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfa00000 s82752 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030787
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/linux-debian ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fffe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3979520k/4980736k available (3260k kernel code, 789468k absent, 211748k reserved, 3425k data, 676k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.309 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.61 BogoMIPS (lpj=12053236)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004026] SELinux: Disabled at boot.
[ 0.004276] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008092] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008537] Mount-cache hash table entries: 256
[ 0.008625] Initializing cgroup subsys ns
[ 0.008627] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008629] Initializing cgroup subsys cpuacct
[ 0.008632] Initializing cgroup subsys devices
[ 0.008634] Initializing cgroup subsys freezer
[ 0.008636] Initializing cgroup subsys net_cls
[ 0.008637] Initializing cgroup subsys blkio
[ 0.008658] tseg: 00cfe00000
[ 0.008660] CPU: Physical Processor ID: 0
[ 0.008661] CPU: Processor Core ID: 0
[ 0.008662] mce: CPU supports 6 MCE banks
[ 0.008668] using C1E aware idle routine
[ 0.009243] ACPI: Core revision 20110112
[ 0.012061] Setting APIC routing to flat
[ 0.012529] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054549] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 03
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.144018] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144031] System has AMD C1E enabled
[ 0.144038] Switch to broadcast mode on CPU1
[ 0.144066] #2
[ 0.236027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236041] Switch to broadcast mode on CPU2
[ 0.236078] #3 Ok.
[ 0.328038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.328053] Switch to broadcast mode on CPU3
[ 0.328058] Brought up 4 CPUs
[ 0.328060] Total of 4 processors activated (24106.61 BogoMIPS).
[ 0.330423] Switch to broadcast mode on CPU0
[ 0.330423] devtmpfs: initialized
[ 0.335384] print_constraints: dummy:
[ 0.335384] NET: Registered protocol family 16
[ 0.335384] node 0 link 0: io port [9000, ffff]
[ 0.335384] TOM: 00000000d0000000 aka 3328M
[ 0.335384] Fam 10h mmconf [e0000000, e00fffff]
[ 0.335384] node 0 link 0: mmio [a0000, bffff]
[ 0.335384] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.335384] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.335384] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
[ 0.335384] TOM2: 0000000130000000 aka 4864M
[ 0.335384] bus: [00, 06] on node 0 link 0
[ 0.335384] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.335384] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.335384] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.335384] bus: 00 index 3 [mem 0xe0700000-0xffffffff]
[ 0.335384] bus: 00 index 4 [mem 0xe0100000-0xe06fffff]
[ 0.335384] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
[ 0.335384] Extended Config Space enabled on 1 nodes
[ 0.335384] ACPI: bus type pci registered
[ 0.335384] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.335384] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.354493] PCI: Using configuration type 1 for base access
[ 0.354742] bio: create slab at 0
[ 0.354742] ACPI: EC: Look up EC in DSDT
[ 0.358685] ACPI: Interpreter enabled
[ 0.358688] ACPI: (supports S0 S3 S4 S5)
[ 0.358701] ACPI: Using IOAPIC for interrupt routing
[ 0.485648] ACPI: No dock devices found.
[ 0.485649] HEST: Table not found.
[ 0.485652] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.485693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.485772] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.485774] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.485776] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.485778] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.485780] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.485790] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.485799] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.485826] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.485847] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.485849] pci 0000:00:02.0: PME# disabled
[ 0.485863] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
[ 0.485882] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.485884] pci 0000:00:06.0: PME# disabled
[ 0.485895] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.485914] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.485916] pci 0000:00:07.0: PME# disabled
[ 0.485927] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.485946] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.485948] pci 0000:00:09.0: PME# disabled
[ 0.485958] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.485977] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.485979] pci 0000:00:0a.0: PME# disabled
[ 0.486002] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.486020] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.486029] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.486038] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.486046] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.486055] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.486064] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.486105] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.486117] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.486176] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.486189] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.486252] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.486270] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.486334] pci 0000:00:12.2: supports D1 D2
[ 0.486336] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.486339] pci 0000:00:12.2: PME# disabled
[ 0.486359] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.486371] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.486429] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.486441] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.486504] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.486522] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.486586] pci 0000:00:13.2: supports D1 D2
[ 0.486588] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.486591] pci 0000:00:13.2: PME# disabled
[ 0.486613] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.486698] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.486713] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.486722] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.486731] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.486739] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.486748] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.486793] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.486812] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.486866] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.486869] pci 0000:00:14.2: PME# disabled
[ 0.486882] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.486950] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.486987] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.487000] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.487060] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.487072] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.487081] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.487091] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.487103] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.487144] pci 0000:01:00.0: [1002:68be] type 0 class 0x000300
[ 0.487155] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.487164] pci 0000:01:00.0: reg 18: [mem 0xfdfc0000-0xfdfdffff 64bit]
[ 0.487170] pci 0000:01:00.0: reg 20: [io 0xae00-0xaeff]
[ 0.487180] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.487195] pci 0000:01:00.0: supports D1 D2
[ 0.487211] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.487222] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[ 0.487258] pci 0000:01:00.1: supports D1 D2
[ 0.492045] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.492049] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.492051] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.492054] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.492087] pci 0000:02:00.0: [197b:2363] type 0 class 0x000106
[ 0.492151] pci 0000:02:00.0: reg 24: [mem 0xfdefe000-0xfdefffff]
[ 0.492183] pci 0000:02:00.0: PME# supported from D3hot
[ 0.492187] pci 0000:02:00.0: PME# disabled
[ 0.492209] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101
[ 0.492227] pci 0000:02:00.1: reg 10: [io 0xef00-0xef07]
[ 0.492237] pci 0000:02:00.1: reg 14: [io 0xee00-0xee03]
[ 0.492247] pci 0000:02:00.1: reg 18: [io 0xed00-0xed07]
[ 0.492257] pci 0000:02:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.492267] pci 0000:02:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.492317] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.492326] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.492329] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.492331] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.492334] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.492366] pci 0000:03:00.0: [1b4b:9128] type 0 class 0x000106
[ 0.492379] pci 0000:03:00.0: reg 10: [io 0xdf00-0xdf07]
[ 0.492389] pci 0000:03:00.0: reg 14: [io 0xde00-0xde03]
[ 0.492398] pci 0000:03:00.0: reg 18: [io 0xdd00-0xdd07]
[ 0.492408] pci 0000:03:00.0: reg 1c: [io 0xdc00-0xdc03]
[ 0.492418] pci 0000:03:00.0: reg 20: [io 0xdb00-0xdb0f]
[ 0.492428] pci 0000:03:00.0: reg 24: [mem 0xfdcff000-0xfdcff7ff]
[ 0.492438] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.492464] pci 0000:03:00.0: PME# supported from D3hot
[ 0.492468] pci 0000:03:00.0: PME# disabled
[ 0.500046] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.500050] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.500052] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.500055] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.500087] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.500102] pci 0000:04:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit]
[ 0.500155] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.500158] pci 0000:04:00.0: PME# disabled
[ 0.508046] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.508050] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.508052] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.508055] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.508086] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.508099] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.508118] pci 0000:05:00.0: reg 18: [mem 0xfd5ff000-0xfd5fffff 64bit pref]
[ 0.508130] pci 0000:05:00.0: reg 20: [mem 0xfd5f8000-0xfd5fbfff 64bit pref]
[ 0.508138] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.508165] pci 0000:05:00.0: supports D1 D2
[ 0.508167] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.508170] pci 0000:05:00.0: PME# disabled
[ 0.516047] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.516051] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.516053] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.516056] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.516102] pci 0000:06:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.516124] pci 0000:06:0e.0: reg 10: [mem 0xfd7ff000-0xfd7ff7ff]
[ 0.516136] pci 0000:06:0e.0: reg 14: [mem 0xfd7f8000-0xfd7fbfff]
[ 0.516212] pci 0000:06:0e.0: supports D1 D2
[ 0.516214] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.516218] pci 0000:06:0e.0: PME# disabled
[ 0.516251] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.516255] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.516258] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.516262] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.516264] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.516266] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.516268] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.516270] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.516272] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.516287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.516461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.516524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.516547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.516567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.516587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.516606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.516626] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.527436] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527465] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527518] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527544] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527569] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527595] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527621] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.527688] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.527692] vgaarb: loaded
[ 0.527712] PCI: Using ACPI for IRQ routing
[ 0.527714] PCI: pci_cache_line_size set to 64 bytes
[ 0.527720] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.527797] reserve RAM buffer: 0000000000098400 - 000000000009ffff
[ 0.527799] reserve RAM buffer: 00000000cfd81000 - 00000000cfffffff
[ 0.527872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.527875] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.529055] Switching to clocksource hpet
[ 0.529792] pnp: PnP ACPI init
[ 0.529803] ACPI: bus type pnp registered
[ 0.529856] pnp 00:00: [bus 00-ff]
[ 0.529857] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.529859] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.529860] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.529862] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.529864] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.529865] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[ 0.529894] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.529901] pnp 00:01: [io 0x0010-0x001f]
[ 0.529902] pnp 00:01: [io 0x0022-0x003f]
[ 0.529904] pnp 00:01: [io 0x0044-0x005f]
[ 0.529905] pnp 00:01: [io 0x0062-0x0063]
[ 0.529906] pnp 00:01: [io 0x0065-0x006f]
[ 0.529908] pnp 00:01: [io 0x0074-0x007f]
[ 0.529909] pnp 00:01: [io 0x0091-0x0093]
[ 0.529910] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.529912] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.529913] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.529915] pnp 00:01: [io 0x0220-0x0225]
[ 0.529916] pnp 00:01: [io 0x0290-0x0294]
[ 0.529959] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.529961] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.529963] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.529965] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530244] Switched to NOHz mode on CPU #3
[ 0.530252] Switched to NOHz mode on CPU #0
[ 0.530255] Switched to NOHz mode on CPU #1
[ 0.530259] Switched to NOHz mode on CPU #2
[ 0.530566] pnp 00:02: [io 0x4100-0x411f]
[ 0.530571] pnp 00:02: [io 0x0228-0x022f]
[ 0.530572] pnp 00:02: [io 0x040b]
[ 0.530574] pnp 00:02: [io 0x04d6]
[ 0.530575] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.530576] pnp 00:02: [io 0x0c14]
[ 0.530578] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.530579] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.530580] pnp 00:02: [io 0x0c6f]
[ 0.530582] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.530583] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.530584] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.530586] pnp 00:02: [io 0x4000-0x40fe]
[ 0.530587] pnp 00:02: [io 0x4210-0x4217]
[ 0.530589] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.530590] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.530591] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.530593] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.530595] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.530600] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.530625] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.530636] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.530641] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.530669] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.530671] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.530673] system 00:02: [io 0x040b] has been reserved
[ 0.530675] system 00:02: [io 0x04d6] has been reserved
[ 0.530677] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.530679] system 00:02: [io 0x0c14] has been reserved
[ 0.530680] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.530682] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.530684] system 00:02: [io 0x0c6f] has been reserved
[ 0.530686] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.530688] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.530690] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.530692] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.530694] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.530695] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.530698] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.530700] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.530702] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.530705] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530772] pnp 00:03: [dma 4]
[ 0.530774] pnp 00:03: [io 0x0000-0x000f]
[ 0.530775] pnp 00:03: [io 0x0080-0x0090]
[ 0.530777] pnp 00:03: [io 0x0094-0x009f]
[ 0.530778] pnp 00:03: [io 0x00c0-0x00df]
[ 0.530800] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.530822] pnp 00:04: [irq 0 disabled]
[ 0.530831] pnp 00:04: [irq 8]
[ 0.530833] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.530854] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.530873] pnp 00:05: [io 0x0070-0x0073]
[ 0.530895] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.530900] pnp 00:06: [io 0x0061]
[ 0.530920] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.530925] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.530932] pnp 00:07: [irq 13]
[ 0.530954] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.531209] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.531248] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.531251] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531327] pnp 00:09: [mem 0x000d7400-0x000d7fff]
[ 0.531329] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 0.531331] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.531332] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.531334] pnp 00:09: [mem 0xcfde0000-0xcfdfffff]
[ 0.531335] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 0.531337] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.531338] pnp 00:09: [mem 0x00100000-0xcfddffff]
[ 0.531340] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.531341] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.531343] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 0.531346] pnp 00:09: disabling [mem 0x000d7400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531349] pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531352] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531355] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531358] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531361] pnp 00:09: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.531411] system 00:09: [mem 0xcfde0000-0xcfdfffff] could not be reserved
[ 0.531414] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.531416] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.531418] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.531420] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.531422] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.531436] pnp: PnP ACPI: found 10 devices
[ 0.531437] ACPI: ACPI bus type pnp unregistered
[ 0.537295] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.537298] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.537300] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.537302] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.537305] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.537308] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.537310] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
[ 0.537313] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.537315] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.537319] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
[ 0.537320] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.537322] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.537325] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.537327] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.537330] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.537332] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.537334] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.537337] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.537340] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd500000-0xfd51ffff pref]
[ 0.537342] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.537344] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.537346] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.537349] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.537352] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[ 0.537354] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.537359] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.537363] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.537380] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.537382] pci 0000:00:02.0: setting latency timer to 64
[ 0.537386] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.537388] pci 0000:00:06.0: setting latency timer to 64
[ 0.537397] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.537400] pci 0000:00:07.0: setting latency timer to 64
[ 0.537409] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.537411] pci 0000:00:09.0: setting latency timer to 64
[ 0.537414] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.537416] pci 0000:00:0a.0: setting latency timer to 64
[ 0.537422] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.537424] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.537425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.537427] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.537429] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.537431] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.537432] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.537434] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.537436] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.537438] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.537439] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.537441] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.537443] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.537445] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.537446] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.537448] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.537450] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.537452] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.537453] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.537455] pci_bus 0000:05: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.537457] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.537459] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.537460] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff pref]
[ 0.537462] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.537464] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.537465] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.537467] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.537469] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.537490] NET: Registered protocol family 2
[ 0.537590] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.538356] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.540250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.540489] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.540491] TCP reno registered
[ 0.540499] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.540522] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.540611] NET: Registered protocol family 1
[ 0.680150] pci 0000:01:00.0: Boot video device
[ 0.680193] PCI: CLS 64 bytes, default 64
[ 0.680229] Unpacking initramfs...
[ 0.868040] Freeing initrd memory: 11756k freed
[ 0.871985] PCI-DMA: Disabling AGP.
[ 0.872089] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.872090] PCI-DMA: using GART IOMMU.
[ 0.872092] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.875519] audit: initializing netlink socket (disabled)
[ 0.875532] type=2000 audit(1308165051.868:1): initialized
[ 0.882345] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.883873] VFS: Disk quotas dquot_6.5.2
[ 0.883913] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.883970] msgmni has been set to 7924
[ 0.884170] alg: No test for stdrng (krng)
[ 0.884205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.884207] io scheduler noop registered
[ 0.884209] io scheduler deadline registered
[ 0.884233] io scheduler cfq registered (default)
[ 0.884322] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.884344] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.884419] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.884437] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.884503] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.884521] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 0.884585] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.884602] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X
[ 0.884667] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.884684] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 0.884813] ERST: Table is not found!
[ 0.988411] Linux agpgart interface v0.103
[ 0.988483] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.988881] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.988891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.989015] mousedev: PS/2 mouse device common for all mice
[ 0.989052] rtc_cmos 00:05: RTC can wake from S4
[ 0.989108] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.989138] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.989145] cpuidle: using governor ladder
[ 0.989147] cpuidle: using governor menu
[ 0.989311] TCP cubic registered
[ 0.989390] NET: Registered protocol family 10
[ 0.989798] Mobile IPv6
[ 0.989800] NET: Registered protocol family 17
[ 0.989803] Registering the dns_resolver key type
[ 0.989874] PM: Hibernation image not present or could not be loaded.
[ 0.989880] registered taskstats version 1
[ 0.990321] rtc_cmos 00:05: setting system clock to 2011-06-15 19:10:52 UTC (1308165052)
[ 0.990339] Initalizing network drop monitor service
[ 0.991288] Freeing unused kernel memory: 676k freed
[ 0.991415] Write protecting the kernel read-only data: 6144k
[ 0.994131] Freeing unused kernel memory: 816k freed
[ 0.996818] Freeing unused kernel memory: 776k freed
[ 1.005699] udevd[98]: starting version 170
[ 1.067561] SCSI subsystem initialized
[ 1.080513] libata version 3.00 loaded.
[ 1.081527] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.081534] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.081557] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.081824] scsi0 : pata_jmicron
[ 1.081893] scsi1 : pata_jmicron
[ 1.081928] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19
[ 1.081930] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19
[ 1.090994] usbcore: registered new interface driver usbfs
[ 1.091072] usbcore: registered new interface driver hub
[ 1.091187] usbcore: registered new device driver usb
[ 1.093817] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093884] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.093900] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.093919] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.108165] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.108184] ehci_hcd 0000:00:12.2: debug port 1
[ 1.108208] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.120150] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.120166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.120169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120170] usb usb1: Product: EHCI Host Controller
[ 1.120172] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 1.120173] usb usb1: SerialNumber: 0000:00:12.2
[ 1.120257] hub 1-0:1.0: USB hub found
[ 1.120260] hub 1-0:1.0: 6 ports detected
[ 1.120380] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.120407] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.120414] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.136180] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.136200] ehci_hcd 0000:00:13.2: debug port 1
[ 1.136212] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.148144] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.148158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.148160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.148162] usb usb2: Product: EHCI Host Controller
[ 1.148163] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[ 1.148165] usb usb2: SerialNumber: 0000:00:13.2
[ 1.148239] hub 2-0:1.0: USB hub found
[ 1.148242] hub 2-0:1.0: 6 ports detected
[ 1.148368] ahci 0000:00:11.0: version 3.0
[ 1.148386] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.148494] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.148497] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.149229] scsi2 : ahci
[ 1.149297] scsi3 : ahci
[ 1.149361] scsi4 : ahci
[ 1.149425] scsi5 : ahci
[ 1.149490] scsi6 : ahci
[ 1.149555] scsi7 : ahci
[ 1.149656] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.149659] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.149662] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.149665] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.149668] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[ 1.149670] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[ 1.149754] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.150042] ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.150089] scsi8 : pata_atiixp
[ 1.150151] scsi9 : pata_atiixp
[ 1.150562] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.150564] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.164190] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.164193] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.164197] ahci 0000:02:00.0: setting latency timer to 64
[ 1.164488] scsi10 : ahci
[ 1.164555] scsi11 : ahci
[ 1.164595] ata11: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18
[ 1.164598] ata12: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18
[ 1.164674] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.164729] ahci 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.173601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.173670] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.173685] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.173695] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.180198] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.180201] ahci 0000:03:00.0: flags: 64bit ncq pio
[ 1.180205] ahci 0000:03:00.0: setting latency timer to 64
[ 1.181171] scsi12 : ahci
[ 1.181240] scsi13 : ahci
[ 1.181303] scsi14 : ahci
[ 1.181365] scsi15 : ahci
[ 1.181432] scsi16 : ahci
[ 1.181494] scsi17 : ahci
[ 1.181558] scsi18 : ahci
[ 1.181621] scsi19 : ahci
[ 1.181661] ata13: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff100 irq 45
[ 1.181664] ata14: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff180 irq 45
[ 1.181667] ata15: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff200 irq 45
[ 1.181670] ata16: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff280 irq 45
[ 1.181673] ata17: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff300 irq 45
[ 1.181676] ata18: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff380 irq 45
[ 1.181678] ata19: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff400 irq 45
[ 1.181681] ata20: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff480 irq 45
[ 1.196191] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.256145] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.256148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256150] usb usb3: Product: OHCI Host Controller
[ 1.256151] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.256153] usb usb3: SerialNumber: 0000:00:12.0
[ 1.256240] hub 3-0:1.0: USB hub found
[ 1.256246] hub 3-0:1.0: 3 ports detected
[ 1.256362] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.256378] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.256385] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.276161] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.312576] ata9.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB02, max UDMA/33
[ 1.328521] ata9.00: configured for UDMA/33
[ 1.336148] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.336151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.336152] usb usb4: Product: OHCI Host Controller
[ 1.336154] usb usb4: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.336155] usb usb4: SerialNumber: 0000:00:12.1
[ 1.336236] hub 4-0:1.0: USB hub found
[ 1.336241] hub 4-0:1.0: 3 ports detected
[ 1.336361] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.336374] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.336381] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.336415] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.392132] CE: hpet increased min_delta_ns to 20113 nsec
[ 1.396181] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.396183] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.396185] usb usb5: Product: OHCI Host Controller
[ 1.396186] usb usb5: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.396188] usb usb5: SerialNumber: 0000:00:13.0
[ 1.396263] hub 5-0:1.0: USB hub found
[ 1.396268] hub 5-0:1.0: 3 ports detected
[ 1.396383] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.396396] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.396402] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.404880] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.464177] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.464179] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464181] usb usb6: Product: OHCI Host Controller
[ 1.464182] usb usb6: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.464184] usb usb6: SerialNumber: 0000:00:13.1
[ 1.464266] hub 6-0:1.0: USB hub found
[ 1.464271] hub 6-0:1.0: 3 ports detected
[ 1.464379] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.464393] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.464400] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.464436] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.472188] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.472220] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.476175] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.476208] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.488148] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.488181] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.500153] ata17: SATA link down (SStatus 0 SControl 300)
[ 1.508172] ata18: SATA link down (SStatus 0 SControl 300)
[ 1.508202] ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.508227] ata19: SATA link down (SStatus 0 SControl 300)
[ 1.508249] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.508282] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.508307] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.508331] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.508347] ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.508459] ata20.00: configured for UDMA/66
[ 1.524123] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.524125] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524127] usb usb7: Product: OHCI Host Controller
[ 1.524128] usb usb7: Manufacturer: Linux 2.6.38-2-amd64 ohci_hcd
[ 1.524130] usb usb7: SerialNumber: 0000:00:14.5
[ 1.524205] hub 7-0:1.0: USB hub found
[ 1.524210] hub 7-0:1.0: 2 ports detected
[ 1.644166] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.644190] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.664655] ata3.00: HPA detected: current 976771055, native 976773168
[ 1.664713] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 1.664715] ata3.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.666804] ata3.00: configured for UDMA/133
[ 1.666919] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 1.683293] ata5.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133
[ 1.683296] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.685966] ata5.00: configured for UDMA/133
[ 1.686066] scsi 4:0:0:0: Direct-Access ATA WDC WD3200BEKT-0 11.0 PQ: 0 ANSI: 5
[ 1.687035] scsi 8:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB02 PQ: 0 ANSI: 5
[ 1.687373] scsi 19:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.691334] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.691349] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.691380] r8169 0000:05:00.0: setting latency timer to 64
[ 1.691510] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1.692248] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.692262] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 1.692264] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.692272] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 1.693059] firewire_ohci 0000:06:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.694519] r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000067e000, 6c:f0:49:b8:1b:e1, XID 083000c0 IRQ 46
[ 1.698732] sd 2:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.698760] sd 2:0:0:0: [sda] Write Protect is off
[ 1.698762] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.698826] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.698851] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.698853] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.698865] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.698913] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.698940] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.699068] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.699123] scsi 8:0:0:0: Attached scsi generic sg2 type 5
[ 1.699164] scsi 19:0:0:0: Attached scsi generic sg3 type 3
[ 1.702379] sdb: sdb1
[ 1.702612] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.706260] sda: sda1 sda2
[ 1.706515] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.712211] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfdafe000
[ 1.712266] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 1.712271] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1.712275] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 1.712279] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1.712283] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[ 1.715563] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 1.715569] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.715571] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.715573] usb usb8: Product: xHCI Host Controller
[ 1.715574] usb usb8: Manufacturer: Linux 2.6.38-2-amd64 xhci_hcd
[ 1.715576] usb usb8: SerialNumber: 0000:04:00.0
[ 1.715643] xHCI xhci_add_endpoint called for root hub
[ 1.715645] xHCI xhci_check_bandwidth called for root hub
[ 1.715668] hub 8-0:1.0: USB hub found
[ 1.715671] hub 8-0:1.0: 4 ports detected
[ 1.724154] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 1.748124] firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.801611] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.801613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.801698] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 1.872164] Refined TSC clocksource calibration: 3013.327 MHz.
[ 1.872167] Switching to clocksource tsc
[ 1.909263] usb 3-3: New USB device found, idVendor=046d, idProduct=c52b
[ 1.909266] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.909268] usb 3-3: Product: USB Receiver
[ 1.909269] usb 3-3: Manufacturer: Logitech
[ 1.944181] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
[ 1.944221] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 1.948408] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input1
[ 1.948499] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 1.957318] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input2
[ 1.957329] usbcore: registered new interface driver usbhid
[ 1.957330] usbhid: USB HID core driver
[ 2.191697] Btrfs loaded
[ 2.198126] device-mapper: uevent: version 1.0.3
[ 2.198258] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[ 2.248189] firewire_core: created device fw0: GUID 003ef53e006cf049, S400
[ 2.614954] PM: Starting manual resume from disk
[ 2.614957] PM: Hibernation image partition 254:1 present
[ 2.614958] PM: Looking for hibernation image.
[ 2.615088] PM: Image not found (code -22)
[ 2.615091] PM: Hibernation image not present or could not be loaded.
[ 2.648334] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.877017] udevd[478]: starting version 170
[ 4.612432] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.612437] ACPI: Power Button [PWRB]
[ 4.612492] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.612495] ACPI: Power Button [PWRF]
[ 4.637092] ACPI: acpi_idle registered with cpuidle
[ 4.637114] ACPI: processor limited to max C-state 1
[ 4.677587] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.059674] wmi: Mapper loaded
[ 5.310313] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 5.310316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.408517] MCE: In-kernel MCE decoding enabled.
[ 5.458946] Disabling lock debugging due to kernel taint
[ 5.458964] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.502409] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.506670] [fglrx] Maximum main memory to use for locked dma buffers: 3802 MBytes.
[ 5.506750] [fglrx] vendor: 1002 device: 68be count: 1
[ 5.507115] [fglrx] ioport: bar 4, base 0xae00, size: 0x100
[ 5.507123] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.507127] pci 0000:01:00.0: setting latency timer to 64
[ 5.507439] [fglrx] Kernel PAT support is enabled
[ 5.507455] [fglrx] module loaded - fglrx 8.85.6 [Apr 19 2011] with 1 minors
[ 5.684327] hda_codec: ALC888: BIOS auto-probing.
[ 5.689930] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 5.690060] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.690113] HDA Intel 0000:01:00.1: irq 52 for MSI/MSI-X
[ 5.690132] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 5.697410] EDAC MC: Ver: 2.1.0 May 8 2011
[ 5.773353] EDAC amd64_edac: v3.3.0
[ 5.773412] EDAC amd64: DRAM ECC disabled.
[ 5.773419] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.773420] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.773421] (Note that use of the override may cause unknown side effects.)
[ 6.590722] kvm: Nested Virtualization enabled
[ 6.590725] kvm: Nested Paging enabled
[ 6.850798] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.990171] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 7.146741] loop: module loaded
[ 7.647855] Adding 3903484k swap on /dev/mapper/linux-swap. Priority:-1 extents:1 across:3903484k
[ 7.991014] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.997862] RPC: Registered udp transport module.
[ 8.997864] RPC: Registered tcp transport module.
[ 8.997866] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.149158] FS-Cache: Loaded
[ 9.207484] FS-Cache: Netfs 'nfs' registered for caching
[ 9.270962] Installing knfsd (copyright (C) 1996 [email protected]).
[ 9.555397] fuse init (API version 7.16)
[ 13.551288] r8169 0000:05:00.0: eth0: link down
[ 13.551293] r8169 0000:05:00.0: eth0: link down
[ 13.551731] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.384364] Bluetooth: Core ver 2.15
[ 15.384383] NET: Registered protocol family 31
[ 15.384385] Bluetooth: HCI device and connection manager initialized
[ 15.384387] Bluetooth: HCI socket layer initialized
[ 15.535303] r8169 0000:05:00.0: eth0: link up
[ 15.535707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.639114] Bluetooth: L2CAP ver 2.15
[ 15.639116] Bluetooth: L2CAP socket layer initialized
[ 15.783835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.783837] Bluetooth: BNEP filters: protocol multicast
[ 16.180616] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor (4 cpu cores) (version 2.20.00)
[ 16.180649] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 16.180651] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 16.180652] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 16.180654] powernow-k8: 3 : pstate 3 (800 MHz)
[ 16.209797] Bluetooth: RFCOMM TTY layer initialized
[ 16.209807] Bluetooth: RFCOMM socket layer initialized
[ 16.209812] Bluetooth: RFCOMM ver 1.11
[ 16.291563] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.291569] Bluetooth: SCO socket layer initialized
[ 16.354813] lp: driver loaded but no devices found
[ 16.519559] ppdev: user-space parallel port driver
[ 16.815124] sshd (1873): /proc/1873/oom_adj is deprecated, please use /proc/1873/oom_score_adj instead.
[ 18.955914] fglrx_pci 0000:01:00.0: irq 53 for MSI/MSI-X
[ 18.956445] [fglrx] Firegl kernel thread PID: 2001
[ 18.956589] [fglrx] Firegl kernel thread PID: 2002
[ 18.956710] [fglrx] Firegl kernel thread PID: 2003
[ 18.957135] [fglrx] IRQ 53 Enabled
[ 19.346899] [fglrx] Gart USWC size:1240 M.
[ 19.346901] [fglrx] Gart cacheable size:491 M.
[ 19.346905] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.346907] [fglrx] Reserved FB block: Unshared offset:f91d000, size:3e3000
[ 19.346909] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 25.932028] eth0: no IPv6 routers present
[ 27.621654] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro,commit=0
[ 27.938683] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro,commit=0
[ 27.943133] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[36828.850056] Clocksource tsc unstable (delta = -25769791386 ns)
[36828.850849] Switching to clocksource hpet
[51849.333161] openssl[2679] trap divide error ip:589f37 sp:7fffa5f55aa0 error:0 in openssl[400000+246000]
[51851.426084] openssl[2682] trap divide error ip:589f37 sp:7fffe2d955f0 error:0 in openssl[400000+246000]
[51853.447473] openssl[2685] trap divide error ip:589f37 sp:7ffff96b67f0 error:0 in openssl[400000+246000]
[51855.468562] openssl[2688] trap divide error ip:589f37 sp:7fff8b311280 error:0 in openssl[400000+246000]