Xorg.0.log - opteron4180
[ 12.986]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 12.986] X Protocol Version 11, Revision 0
[ 12.986] Build Operating System: Linux 2.6.39-1-amd64 x86_64 Debian
[ 12.986] Current Operating System: Linux numa 3.0.0-rc2 #1 SMP Sun Jun 12 10:57:33 MSD 2011 x86_64
[ 12.986] Build Date: 30 May 2011 10:23:14AM
[ 12.986] xorg-server 2:1.10.2-1 (Cyril Brulebois )
[ 12.986] Current version of pixman: 0.21.8
[ 12.986] Before reporting problems, check
to make sure that you have the latest version.
[ 12.986] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.986] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 13 09:59:23 2011
[ 13.023] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.053] (==) No Layout section. Using the first Screen section.
[ 13.053] (==) No screen section available. Using defaults.
[ 13.053] (**) |-->Screen "Default Screen Section" (0)
[ 13.053] (**) | |-->Monitor ""
[ 13.053] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.053] (==) Automatically adding devices
[ 13.053] (==) Automatically enabling devices
[ 13.067] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.067] Entry deleted from font path.
[ 13.089] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[ 13.089] Entry deleted from font path.
[ 13.089] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[ 13.089] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.089] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.089] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.089] (II) Loader magic: 0x7d7b00
[ 13.089] (II) Module ABI versions:
[ 13.089] X.Org ANSI C Emulation: 0.4
[ 13.089] X.Org Video Driver: 10.0
[ 13.089] X.Org XInput driver : 12.2
[ 13.089] X.Org Server Extension : 5.0
[ 13.090] (--) PCI:*(0:1:5:0) 1a03:2000:1a03:2000 rev 16, Mem @ 0xfb000000/8388608, 0xfbee0000/131072, I/O @ 0x0000dc00/128
[ 13.090] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13.090] (II) LoadModule: "extmod"
[ 13.090] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.104] (II) Module extmod: vendor="X.Org Foundation"
[ 13.104] compiled for 1.10.2, module version = 1.0.0
[ 13.104] Module class: X.Org Server Extension
[ 13.104] ABI class: X.Org Server Extension, version 5.0
[ 13.104] (II) Loading extension SELinux
[ 13.104] (II) Loading extension MIT-SCREEN-SAVER
[ 13.104] (II) Loading extension XFree86-VidModeExtension
[ 13.104] (II) Loading extension XFree86-DGA
[ 13.104] (II) Loading extension DPMS
[ 13.104] (II) Loading extension XVideo
[ 13.104] (II) Loading extension XVideo-MotionCompensation
[ 13.104] (II) Loading extension X-Resource
[ 13.104] (II) LoadModule: "dbe"
[ 13.104] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.110] (II) Module dbe: vendor="X.Org Foundation"
[ 13.110] compiled for 1.10.2, module version = 1.0.0
[ 13.110] Module class: X.Org Server Extension
[ 13.110] ABI class: X.Org Server Extension, version 5.0
[ 13.111] (II) Loading extension DOUBLE-BUFFER
[ 13.111] (II) LoadModule: "glx"
[ 13.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.126] (II) Module glx: vendor="X.Org Foundation"
[ 13.126] compiled for 1.10.2, module version = 1.0.0
[ 13.126] ABI class: X.Org Server Extension, version 5.0
[ 13.126] (==) AIGLX enabled
[ 13.126] (II) Loading extension GLX
[ 13.126] (II) LoadModule: "record"
[ 13.126] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.127] (II) Module record: vendor="X.Org Foundation"
[ 13.127] compiled for 1.10.2, module version = 1.13.0
[ 13.127] Module class: X.Org Server Extension
[ 13.127] ABI class: X.Org Server Extension, version 5.0
[ 13.127] (II) Loading extension RECORD
[ 13.127] (II) LoadModule: "dri"
[ 13.127] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.134] (II) Module dri: vendor="X.Org Foundation"
[ 13.134] compiled for 1.10.2, module version = 1.0.0
[ 13.134] ABI class: X.Org Server Extension, version 5.0
[ 13.134] (II) Loading extension XFree86-DRI
[ 13.134] (II) LoadModule: "dri2"
[ 13.134] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.135] (II) Module dri2: vendor="X.Org Foundation"
[ 13.135] compiled for 1.10.2, module version = 1.2.0
[ 13.135] ABI class: X.Org Server Extension, version 5.0
[ 13.135] (II) Loading extension DRI2
[ 13.135] (==) Matched ast as autoconfigured driver 0
[ 13.135] (==) Matched vesa as autoconfigured driver 1
[ 13.135] (==) Matched fbdev as autoconfigured driver 2
[ 13.135] (==) Assigned the driver to the xf86ConfigLayout
[ 13.135] (II) LoadModule: "ast"
[ 13.135] (II) Loading /usr/lib/xorg/modules/drivers/ast_drv.so
[ 13.145] (II) Module ast: vendor="X.Org Foundation"
[ 13.145] compiled for 1.10.2, module version = 0.92.2
[ 13.145] Module class: X.Org Video Driver
[ 13.145] ABI class: X.Org Video Driver, version 10.0
[ 13.145] (II) LoadModule: "vesa"
[ 13.145] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13.169] (II) Module vesa: vendor="X.Org Foundation"
[ 13.169] compiled for 1.10.1, module version = 2.3.0
[ 13.169] Module class: X.Org Video Driver
[ 13.169] ABI class: X.Org Video Driver, version 10.0
[ 13.169] (II) LoadModule: "fbdev"
[ 13.169] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13.176] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.176] compiled for 1.10.1, module version = 0.4.2
[ 13.176] ABI class: X.Org Video Driver, version 10.0
[ 13.176] (II) AST: Driver for ASPEED Graphics Chipsets: ASPEED Graphics Family,
ASPEED Graphics Family, ASPEED AST1180 Graphics
[ 13.176] (II) VESA: driver for VESA chipsets: vesa
[ 13.176] (II) FBDEV: driver for framebuffer: fbdev
[ 13.176] (++) using VT number 7
[ 13.179] (WW) Falling back to old probe method for ast
[ 13.179] (--) Assigning device section with no busID to primary device
[ 13.179] (--) Chipset ASPEED Graphics Family found
[ 13.179] (II) Loading /usr/lib/xorg/modules/drivers/ast_drv.so
[ 13.179] (WW) Falling back to old probe method for vesa
[ 13.179] (WW) Falling back to old probe method for fbdev
[ 13.179] (II) Loading sub module "fbdevhw"
[ 13.179] (II) LoadModule: "fbdevhw"
[ 13.180] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 13.184] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.184] compiled for 1.10.2, module version = 0.0.2
[ 13.184] ABI class: X.Org Video Driver, version 10.0
[ 13.184] (EE) open /dev/fb0: No such file or directory
[ 13.184] (II) Loading sub module "vgahw"
[ 13.184] (II) LoadModule: "vgahw"
[ 13.184] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 13.185] (II) Module vgahw: vendor="X.Org Foundation"
[ 13.185] compiled for 1.10.2, module version = 0.1.0
[ 13.185] ABI class: X.Org Video Driver, version 10.0
[ 13.185] (II) Loading sub module "fb"
[ 13.185] (II) LoadModule: "fb"
[ 13.185] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.194] (II) Module fb: vendor="X.Org Foundation"
[ 13.194] compiled for 1.10.2, module version = 1.0.0
[ 13.194] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.194] (II) AST(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.194] (==) AST(0): Depth 24, (--) framebuffer bpp 32
[ 13.194] (==) AST(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.194] (==) AST(0): RGB weight 888
[ 13.194] (==) AST(0): Default visual is TrueColor
[ 13.194] (--) AST(0): Chipset: "ASPEED Graphics Family"
[ 13.194] (II) AST(0): Linear framebuffer at 0xFB000000
[ 13.194] (II) AST(0): IO registers at addr 0xFBEE0000
[ 13.194] (II) AST(0): AST1100 Detected.
[ 13.194] (II) Loading sub module "vbe"
[ 13.194] (II) LoadModule: "vbe"
[ 13.194] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 13.195] (II) Module vbe: vendor="X.Org Foundation"
[ 13.195] compiled for 1.10.2, module version = 1.1.0
[ 13.195] ABI class: X.Org Video Driver, version 10.0
[ 13.195] (II) Loading sub module "int10"
[ 13.195] (II) LoadModule: "int10"
[ 13.195] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 13.199] (II) Module int10: vendor="X.Org Foundation"
[ 13.199] compiled for 1.10.2, module version = 1.0.0
[ 13.199] ABI class: X.Org Video Driver, version 10.0
[ 13.199] (II) AST(0): initializing int10
[ 13.201] (II) AST(0): Primary V_BIOS segment is: 0xc000
[ 13.201] (II) AST(0): VESA BIOS detected
[ 13.201] (II) AST(0): VESA VBE Version 3.0
[ 13.201] (II) AST(0): VESA VBE Total Mem: 8192 kB
[ 13.201] (II) AST(0): VESA VBE OEM: ASPEED
[ 13.201] (II) AST(0): VESA VBE OEM Software Rev: 1.0
[ 13.201] (II) AST(0): VESA VBE OEM Vendor: ASPEED Technology, Inc.
[ 13.201] (II) AST(0): VESA VBE OEM Product: AST GPU
[ 13.201] (II) AST(0): VESA VBE OEM Product Rev: 0.90.07
[ 13.201] (II) Loading sub module "ddc"
[ 13.201] (II) LoadModule: "ddc"
[ 13.201] (II) Module "ddc" already built-in
[ 13.345] (II) AST(0): VESA VBE DDC supported
[ 13.345] (II) AST(0): VESA VBE DDC Level 2
[ 13.345] (II) AST(0): VESA VBE DDC transfer in appr. 1 sec.
[ 14.807] (II) AST(0): VESA VBE DDC read successfully
[ 14.807] (II) AST(0): Manufacturer: GSM Model: 4b05 Serial#: 270820
[ 14.807] (II) AST(0): Year: 2006 Week: 11
[ 14.807] (II) AST(0): EDID Version: 1.3
[ 14.807] (II) AST(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 14.807] (II) AST(0): Sync: Separate SyncOnGreen
[ 14.807] (II) AST(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 14.807] (II) AST(0): Gamma: 2.20
[ 14.807] (II) AST(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 14.807] (II) AST(0): First detailed timing is preferred mode
[ 14.807] (II) AST(0): redX: 0.643 redY: 0.325 greenX: 0.295 greenY: 0.616
[ 14.807] (II) AST(0): blueX: 0.143 blueY: 0.081 whiteX: 0.310 whiteY: 0.330
[ 14.807] (II) AST(0): Supported established timings:
[ 14.807] (II) AST(0): 720x400@70Hz
[ 14.807] (II) AST(0): 640x480@60Hz
[ 14.807] (II) AST(0): 640x480@75Hz
[ 14.807] (II) AST(0): 800x600@56Hz
[ 14.807] (II) AST(0): 800x600@60Hz
[ 14.807] (II) AST(0): 800x600@75Hz
[ 14.807] (II) AST(0): 832x624@75Hz
[ 14.807] (II) AST(0): 1024x768@60Hz
[ 14.807] (II) AST(0): 1024x768@70Hz
[ 14.807] (II) AST(0): 1024x768@75Hz
[ 14.807] (II) AST(0): 1280x1024@75Hz
[ 14.807] (II) AST(0): 1152x864@75Hz
[ 14.807] (II) AST(0): Manufacturer's mask: 0
[ 14.807] (II) AST(0): Supported standard timings:
[ 14.807] (II) AST(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 14.807] (II) AST(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.807] (II) AST(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 14.807] (II) AST(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.807] (II) AST(0): Supported detailed timing:
[ 14.807] (II) AST(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 14.807] (II) AST(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 14.807] (II) AST(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 14.807] (II) AST(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 145 MHz
[ 14.807] (II) AST(0): Monitor name: L194WT
[ 14.807] (II) AST(0): Monitor name:
[ 14.807] (II) AST(0): EDID (in hex):
[ 14.807] (II) AST(0): 00ffffffffffff001e6d054be4210400
[ 14.807] (II) AST(0): 0b1001036a291a78ea9bb6a4534b9d24
[ 14.807] (II) AST(0): 144f54a76f80950f81808140714f0101
[ 14.807] (II) AST(0): 0101010101019a29a0d0518422305098
[ 14.807] (II) AST(0): 360098ff1000001c000000fd00384b1c
[ 14.807] (II) AST(0): 530e000a202020202020000000fc004c
[ 14.807] (II) AST(0): 31393457540a202020202020000000fc
[ 14.807] (II) AST(0): 000a2020202020202020202020200042
[ 14.807] (II) AST(0): EDID vendor "GSM", prod id 19205
[ 14.807] (II) AST(0): Using EDID range info for horizontal sync
[ 14.807] (II) AST(0): Using EDID range info for vertical refresh
[ 14.807] (II) AST(0): Printing DDC gathered Modelines:
[ 14.807] (II) AST(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 14.807] (II) AST(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.807] (II) AST(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 14.807] (II) AST(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.807] (II) AST(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.807] (II) AST(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 14.807] (II) AST(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.807] (II) AST(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.807] (II) AST(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 14.807] (II) AST(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.807] (II) AST(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 14.807] (II) AST(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.807] (II) AST(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 14.807] (II) AST(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 14.807] (II) AST(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.807] (II) AST(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 14.807] (II) AST(0): : Using hsync range of 28.00-83.00 kHz
[ 14.807] (II) AST(0): : Using vrefresh range of 56.00-75.00 Hz
[ 14.807] (II) AST(0): : Using maximum pixel clock of 145.00 MHz
[ 14.807] (II) AST(0): Estimated virtual size for aspect ratio 1.5769 is 1440x900
[ 14.807] (II) AST(0): Clock range: 9.50 to 120.00 MHz
[ 14.807] (II) AST(0): Not using default mode "640x350" (no mode of this name)
[ 14.807] (II) AST(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
[ 14.807] (II) AST(0): Not using default mode "640x400" (no mode of this name)
[ 14.807] (II) AST(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
[ 14.807] (II) AST(0): Not using default mode "720x400" (no mode of this name)
[ 14.807] (II) AST(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "640x480" (vrefresh out of range)
[ 14.808] (II) AST(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "800x600" (vrefresh out of range)
[ 14.808] (II) AST(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1024x768" (vrefresh out of range)
[ 14.808] (II) AST(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1280x960" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1280x960" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "832x624" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1360x768" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1360x768" (no mode of this name)
[ 14.808] (II) AST(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1600x1024" (width too large for virtual size)
[ 14.808] (II) AST(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1680x1050" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1680x1050" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1680x1050" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1680x1050" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1680x1050" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1920x1080" (width requires unsupported line pitch)
[ 14.808] (II) AST(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1920x1200" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 14.808] (II) AST(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using driver mode "720x400" (no mode of this name)
[ 14.808] (II) AST(0): Not using driver mode "1280x1024" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using driver mode "832x624" (no mode of this name)
[ 14.808] (II) AST(0): Not using driver mode "1152x864" (no mode of this name)
[ 14.808] (II) AST(0): Not using driver mode "1440x900" (bad mode clock/interlace/doublescan)
[ 14.808] (II) AST(0): Not using driver mode "1280x1024" (height too large for virtual size)
[ 14.808] (II) AST(0): Not using driver mode "1280x960" (height too large for virtual size)
[ 14.808] (--) AST(0): Virtual size is 1440x900 (pitch 1440)
[ 14.808] (**) AST(0): *Driver mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz
[ 14.808] (II) AST(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 14.808] (**) AST(0): *Default mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz
[ 14.809] (II) AST(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 14.809] (**) AST(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.809] (**) AST(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 14.809] (**) AST(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.809] (**) AST(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.809] (**) AST(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 14.809] (**) AST(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 14.809] (II) AST(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.809] (**) AST(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.809] (**) AST(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.809] (**) AST(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 14.809] (**) AST(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.809] (**) AST(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 14.809] (**) AST(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.809] (**) AST(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 14.809] (II) AST(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 14.809] (**) AST(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.809] (**) AST(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 14.809] (II) AST(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.809] (**) AST(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 14.809] (II) AST(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.809] (**) AST(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 14.809] (II) AST(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 14.809] (**) AST(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 14.809] (II) AST(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.809] (**) AST(0): Display dimensions: (410, 260) mm
[ 14.809] (**) AST(0): DPI set to (89, 87)
[ 14.809] (II) Loading sub module "xaa"
[ 14.809] (II) LoadModule: "xaa"
[ 14.809] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 14.875] (II) Module xaa: vendor="X.Org Foundation"
[ 14.875] compiled for 1.10.2, module version = 1.2.1
[ 14.875] ABI class: X.Org Video Driver, version 10.0
[ 14.875] (II) AST(0): No ENG Capability options found
[ 14.875] (II) AST(0): No DBG Seleclt options found
[ 14.875] (II) Loading sub module "ramdac"
[ 14.875] (II) LoadModule: "ramdac"
[ 14.875] (II) Module "ramdac" already built-in
[ 14.875] (II) AST(0): No HWC_NUM options found
[ 14.875] (II) UnloadModule: "vesa"
[ 14.875] (II) Unloading vesa
[ 14.875] (II) UnloadModule: "fbdev"
[ 14.875] (II) Unloading fbdev
[ 14.875] (II) UnloadModule: "fbdevhw"
[ 14.875] (II) Unloading fbdevhw
[ 14.875] (--) Depth 24 pixmap format is 32 bpp
[ 14.886] (II) AST(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd880
[ 15.109] (II) AST(0): Allocate CMDQ size is 512 kbyte
[ 15.172] (II) AST(0): Using XFree86 Acceleration Architecture (XAA)
[ 15.172] Screen to screen bit blits
[ 15.172] Solid filled rectangles
[ 15.172] 8x8 mono pattern filled rectangles
[ 15.172] 8x8 color pattern filled rectangles
[ 15.172] Solid Lines
[ 15.172] Dashed Lines
[ 15.173] Setting up tile and stipple cache:
[ 15.173] 11 128x128 slots
[ 15.173] 32 8x8 color pattern slots
[ 15.185] (==) AST(0): Backing store disabled
[ 15.185] (==) AST(0): Silken mouse enabled
[ 15.201] (==) AST(0): DPMS enabled
[ 15.201] (==) RandR enabled
[ 15.201] (II) Initializing built-in extension Generic Event Extension
[ 15.201] (II) Initializing built-in extension SHAPE
[ 15.201] (II) Initializing built-in extension MIT-SHM
[ 15.201] (II) Initializing built-in extension XInputExtension
[ 15.201] (II) Initializing built-in extension XTEST
[ 15.201] (II) Initializing built-in extension BIG-REQUESTS
[ 15.201] (II) Initializing built-in extension SYNC
[ 15.201] (II) Initializing built-in extension XKEYBOARD
[ 15.201] (II) Initializing built-in extension XC-MISC
[ 15.201] (II) Initializing built-in extension SECURITY
[ 15.201] (II) Initializing built-in extension XINERAMA
[ 15.201] (II) Initializing built-in extension XFIXES
[ 15.201] (II) Initializing built-in extension RENDER
[ 15.201] (II) Initializing built-in extension RANDR
[ 15.201] (II) Initializing built-in extension COMPOSITE
[ 15.201] (II) Initializing built-in extension DAMAGE
[ 15.201] (II) SELinux: Disabled on system
[ 15.215] (II) AIGLX: Screen 0 is not DRI2 capable
[ 15.215] (II) AIGLX: Screen 0 is not DRI capable
[ 15.318] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 15.318] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 15.857] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.857] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.857] (II) LoadModule: "evdev"
[ 15.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.876] (II) Module evdev: vendor="X.Org Foundation"
[ 15.876] compiled for 1.10.1, module version = 2.6.0
[ 15.876] Module class: X.Org XInput Driver
[ 15.876] ABI class: X.Org XInput driver, version 12.2
[ 15.876] (II) Using input driver 'evdev' for 'Power Button'
[ 15.876] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.876] (**) Power Button: always reports core events
[ 15.876] (**) Power Button: Device: "/dev/input/event5"
[ 15.876] (--) Power Button: Found keys
[ 15.877] (II) Power Button: Configuring as keyboard
[ 15.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 15.877] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 15.877] (**) Option "xkb_rules" "evdev"
[ 15.877] (**) Option "xkb_model" "pc105"
[ 15.877] (**) Option "xkb_layout" "us"
[ 15.882] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 15.882] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.882] (II) Using input driver 'evdev' for 'Power Button'
[ 15.882] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.882] (**) Power Button: always reports core events
[ 15.882] (**) Power Button: Device: "/dev/input/event4"
[ 15.882] (--) Power Button: Found keys
[ 15.882] (II) Power Button: Configuring as keyboard
[ 15.882] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 15.882] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 15.882] (**) Option "xkb_rules" "evdev"
[ 15.882] (**) Option "xkb_model" "pc105"
[ 15.882] (**) Option "xkb_layout" "us"
[ 15.891] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 15.891] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 15.891] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 15.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.891] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 15.891] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 15.891] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 15.891] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 15.891] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 15.891] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 15.891] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 15.891] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 15.891] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 15.891] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input0/event0"
[ 15.891] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 15.892] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 15.892] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 15.892] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 15.892] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 15.892] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 15.893] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 15.893] (II) No input driver/identifier specified (ignoring)
[ 15.894] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event1)
[ 15.894] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.894] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 15.894] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.894] (**) BTC USB Multimedia Keyboard: always reports core events
[ 15.894] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event1"
[ 15.894] (--) BTC USB Multimedia Keyboard: Found keys
[ 15.894] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[ 15.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input1/event1"
[ 15.894] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[ 15.894] (**) Option "xkb_rules" "evdev"
[ 15.894] (**) Option "xkb_model" "pc105"
[ 15.894] (**) Option "xkb_layout" "us"
[ 15.896] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event2)
[ 15.896] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.896] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 15.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.896] (**) BTC USB Multimedia Keyboard: always reports core events
[ 15.896] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 15.896] (--) BTC USB Multimedia Keyboard: Found keys
[ 15.896] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[ 15.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input2/event2"
[ 15.896] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[ 15.896] (**) Option "xkb_rules" "evdev"
[ 15.896] (**) Option "xkb_model" "pc105"
[ 15.896] (**) Option "xkb_layout" "us"
[ 15.898] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 15.898] (II) No input driver/identifier specified (ignoring)
[ 197.556] (II) config/udev: removing device Logitech USB-PS/2 Optical Mouse
[ 197.556] (II) Logitech USB-PS/2 Optical Mouse: Close
[ 197.556] (II) UnloadModule: "evdev"
[ 197.556] (II) Unloading evdev
[ 230.768] (II) config/udev: removing device BTC USB Multimedia Keyboard
[ 230.768] (II) BTC USB Multimedia Keyboard: Close
[ 230.768] (II) UnloadModule: "evdev"
[ 230.768] (II) Unloading evdev
[ 230.896] (II) config/udev: removing device BTC USB Multimedia Keyboard
[ 230.896] (II) BTC USB Multimedia Keyboard: Close
[ 230.896] (II) UnloadModule: "evdev"
[ 230.896] (II) Unloading evdev
[ 236.799] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 236.799] (II) No input driver/identifier specified (ignoring)
[ 236.799] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 236.799] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 236.799] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 236.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 236.799] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 236.800] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 236.800] (--) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 236.800] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 236.800] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 236.800] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 236.800] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 236.800] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 236.800] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 236.800] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 236.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input6/event0"
[ 236.800] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 236.800] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 236.800] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 236.800] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 236.801] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 236.801] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 238.490] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event2)
[ 238.490] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 238.490] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 238.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 238.491] (**) BTC USB Multimedia Keyboard: always reports core events
[ 238.491] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 238.491] (--) BTC USB Multimedia Keyboard: Found keys
[ 238.491] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[ 238.491] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input8/event2"
[ 238.491] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[ 238.491] (**) Option "xkb_rules" "evdev"
[ 238.491] (**) Option "xkb_model" "pc105"
[ 238.491] (**) Option "xkb_layout" "us"
[ 238.492] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event1)
[ 238.492] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 238.492] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 238.492] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 238.492] (**) BTC USB Multimedia Keyboard: always reports core events
[ 238.492] (**) BTC USB Multimedia Keyboard: Device: "/dev/input/event1"
[ 238.492] (--) BTC USB Multimedia Keyboard: Found keys
[ 238.492] (II) BTC USB Multimedia Keyboard: Configuring as keyboard
[ 238.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input7/event1"
[ 238.492] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD)
[ 238.492] (**) Option "xkb_rules" "evdev"
[ 238.492] (**) Option "xkb_model" "pc105"
[ 238.492] (**) Option "xkb_layout" "us"