dmesg - 110605_2325

Return To 110605_2325 System Information

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
[    0.000000]  BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afd81000 (usable)
[    0.000000]  BIOS-e820: 00000000afde0000 - 00000000afde3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afde3000 - 00000000afdf0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000afdf0000 - 00000000afe00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA785GMT-UD2H/GA-MA785GMT-UD2H, BIOS F7 03/19/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000AFE00000 mask FFFFFFE00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000afe00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xafd81 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5970] f5970
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000afd81000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00afc00000 page 2M
[    0.000000]  00afc00000 - 00afd81000 page 4k
[    0.000000] kernel direct mapping tables up to afd81000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ afd7f000-afd81000
[    0.000000] RAMDISK: 366dc000 - 37366000
[    0.000000] ACPI: RSDP 00000000000f7310 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000afde3000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000afde30c0 075A2 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000afde0000 00040
[    0.000000] ACPI: SSDT 00000000afdea740 008F5 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 00000000afdeb040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000afdeb080 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 00000000afdeb0c0 0032A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 00000000afdea680 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [000000012fffb000 - 000000012fffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012c600000-ffff88012f9fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000098
[    0.000000]     0: 0x00000100 -> 0x000afd81
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 916745
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 701881 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 5 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000098000 - 0000000000099000
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000afd81000 - 00000000afde0000
[    0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afde3000
[    0.000000] PM: Registered nosave memory: 00000000afde3000 - 00000000afdf0000
[    0.000000] PM: Registered nosave memory: 00000000afdf0000 - 00000000afe00000
[    0.000000] PM: Registered nosave memory: 00000000afe00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at afe00000 (gap: afe00000:30200000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800afa00000 s84416 r8192 d22080 u262144
[    0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 899715
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 821c000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[    0.000000] PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000
[    0.000000] Memory: 3454964k/4980736k available (5940k kernel code, 1313756k absent, 212016k reserved, 5017k data, 956k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 36700160 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2913.461 MHz processor.
[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.92 BogoMIPS (lpj=29134610)
[    0.020007] pid_max: default: 32768 minimum: 301
[    0.020027] Security Framework initialized
[    0.020039] AppArmor: AppArmor initialized
[    0.020040] Yama: becoming mindful.
[    0.020360] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.021501] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.021963] Mount-cache hash table entries: 256
[    0.022062] Initializing cgroup subsys ns
[    0.022065] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.022068] Initializing cgroup subsys cpuacct
[    0.022071] Initializing cgroup subsys memory
[    0.022077] Initializing cgroup subsys devices
[    0.022079] Initializing cgroup subsys freezer
[    0.022081] Initializing cgroup subsys net_cls
[    0.022083] Initializing cgroup subsys blkio
[    0.022106] tseg: 00afe00000
[    0.022108] CPU: Physical Processor ID: 0
[    0.022109] CPU: Processor Core ID: 0
[    0.022110] mce: CPU supports 6 MCE banks
[    0.022118] using C1E aware idle routine
[    0.023365] ACPI: Core revision 20110112
[    0.030028] ftrace: allocating 24314 entries in 96 pages
[    0.040068] Setting APIC routing to flat
[    0.040548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.141362] CPU0: AMD Athlon(tm) II X3 435 Processor stepping 02
[    0.150000] Performance Events: AMD PMU driver.
[    0.150000] ... version:                0
[    0.150000] ... bit width:              48
[    0.150000] ... generic registers:      4
[    0.150000] ... value mask:             0000ffffffffffff
[    0.150000] ... max period:             00007fffffffffff
[    0.150000] ... fixed-purpose events:   0
[    0.150000] ... event mask:             000000000000000f
[    0.150000] Booting Node   0, Processors  #1
[    0.310013] System has AMD C1E enabled
[    0.310028] Switch to broadcast mode on CPU1
[    0.310056]  #2
[    0.480010] Brought up 3 CPUs
[    0.480012] Total of 3 processors activated (17479.60 BogoMIPS).
[    0.480014] Switch to broadcast mode on CPU2
[    0.480304] Switch to broadcast mode on CPU0
[    0.480304] devtmpfs: initialized
[    0.480668] print_constraints: dummy: 
[    0.480690] Time: 19:17:38  Date: 06/05/11
[    0.480717] NET: Registered protocol family 16
[    0.480800] node 0 link 0: io port [c000, ffff]
[    0.480803] TOM: 00000000d0000000 aka 3328M
[    0.480804] Fam 10h mmconf [e0000000, e00fffff]
[    0.480806] node 0 link 0: mmio [a0000, bffff]
[    0.480808] node 0 link 0: mmio [d0000000, dfffffff]
[    0.480810] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.480812] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[    0.480815] TOM2: 0000000130000000 aka 4864M
[    0.480817] bus: [00, 03] on node 0 link 0
[    0.480819] bus: 00 index 0 [io  0x0000-0xffff]
[    0.480821] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.480823] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[    0.480824] bus: 00 index 3 [mem 0xe0400000-0xffffffff]
[    0.480826] bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
[    0.480828] bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
[    0.480837] Extended Config Space enabled on 1 nodes
[    0.480853] ACPI: bus type pci registered
[    0.480727] Trying to unpack rootfs image as initramfs...
[    0.480907] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.480910] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.499254] PCI: Using configuration type 1 for base access
[    0.499756] bio: create slab  at 0
[    0.500567] ACPI: EC: Look up EC in DSDT
[    0.503992] ACPI: Interpreter enabled
[    0.503995] ACPI: (supports S0 S3 S4 S5)
[    0.504009] ACPI: Using IOAPIC for interrupt routing
[    0.660650] Freeing initrd memory: 12840k freed
[    0.741698] ACPI: No dock devices found.
[    0.741701] HEST: Table not found.
[    0.741703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.741749] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.741834] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.741837] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.741838] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.741840] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.741842] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[    0.741854] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.741865] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.741892] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[    0.741926] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[    0.741949] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.741951] pci 0000:00:0a.0: PME# disabled
[    0.741975] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.741994] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
[    0.742003] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
[    0.742012] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
[    0.742021] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
[    0.742030] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
[    0.742039] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[    0.742080] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.742093] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[    0.742153] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.742165] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.742230] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.742248] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[    0.742314] pci 0000:00:12.2: supports D1 D2
[    0.742315] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.742319] pci 0000:00:12.2: PME# disabled
[    0.742340] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.742352] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[    0.742412] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.742424] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[    0.742489] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.742507] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[    0.742573] pci 0000:00:13.2: supports D1 D2
[    0.742575] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.742578] pci 0000:00:13.2: PME# disabled
[    0.742601] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.742687] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.742703] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.742712] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.742720] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.742729] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.742738] pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
[    0.742784] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.742804] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.742859] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.742863] pci 0000:00:14.2: PME# disabled
[    0.742874] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.742945] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.742983] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.742996] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[    0.743058] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[    0.743070] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[    0.743080] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[    0.743091] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[    0.743103] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[    0.743140] pci 0000:01:05.0: [1002:9710] type 0 class 0x000300
[    0.743147] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.743151] pci 0000:01:05.0: reg 14: [io  0xee00-0xeeff]
[    0.743155] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff]
[    0.743164] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[    0.743174] pci 0000:01:05.0: supports D1 D2
[    0.743182] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[    0.743188] pci 0000:01:05.1: reg 10: [mem 0xfdffc000-0xfdffffff]
[    0.743210] pci 0000:01:05.1: supports D1 D2
[    0.743245] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.743248] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.743250] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.743253] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.743285] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.743296] pci 0000:02:00.0: reg 10: [io  0xde00-0xdeff]
[    0.743316] pci 0000:02:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref]
[    0.743328] pci 0000:02:00.0: reg 20: [mem 0xfdae0000-0xfdaeffff 64bit pref]
[    0.743337] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.743363] pci 0000:02:00.0: supports D1 D2
[    0.743364] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.743368] pci 0000:02:00.0: PME# disabled
[    0.770012] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.770014] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.770017] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.770020] pci 0000:00:0a.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.770077] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[    0.770081] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.770085] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.770089] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.770091] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.770092] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.770094] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.770096] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.770098] pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.770109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.770273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.770324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.770348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.770372]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.780290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780350] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780379] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780407] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780464] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780493] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.780582] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.780584] vgaarb: loaded
[    0.780707] SCSI subsystem initialized
[    0.790026] libata version 3.00 loaded.
[    0.790045] usbcore: registered new interface driver usbfs
[    0.790052] usbcore: registered new interface driver hub
[    0.790056] usbcore: registered new device driver usb
[    0.790100] wmi: Mapper loaded
[    0.790102] PCI: Using ACPI for IRQ routing
[    0.790104] PCI: pci_cache_line_size set to 64 bytes
[    0.790110] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.790170] reserve RAM buffer: 0000000000098400 - 000000000009ffff 
[    0.790172] reserve RAM buffer: 00000000afd81000 - 00000000afffffff 
[    0.790239] NetLabel: Initializing
[    0.790241] NetLabel:  domain hash size = 128
[    0.790242] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.790250] NetLabel:  unlabeled traffic allowed by default
[    0.790280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.790283] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.792309] Switching to clocksource hpet
[    0.796930] AppArmor: AppArmor Filesystem Enabled
[    0.796953] pnp: PnP ACPI init
[    0.796966] ACPI: bus type pnp registered
[    0.797046] pnp 00:00: [bus 00-ff]
[    0.797048] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.797050] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.797051] pnp 00:00: [io  0x0d00-0xffff window]
[    0.797053] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.797055] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.797057] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[    0.797099] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.797107] pnp 00:01: [io  0x0010-0x001f]
[    0.797108] pnp 00:01: [io  0x0022-0x003f]
[    0.797110] pnp 00:01: [io  0x0044-0x005f]
[    0.797111] pnp 00:01: [io  0x0062-0x0063]
[    0.797112] pnp 00:01: [io  0x0065-0x006f]
[    0.797114] pnp 00:01: [io  0x0074-0x007f]
[    0.797115] pnp 00:01: [io  0x0091-0x0093]
[    0.797117] pnp 00:01: [io  0x00a2-0x00bf]
[    0.797118] pnp 00:01: [io  0x00e0-0x00ef]
[    0.797119] pnp 00:01: [io  0x04d0-0x04d1]
[    0.797121] pnp 00:01: [io  0x0220-0x0225]
[    0.797122] pnp 00:01: [io  0x0290-0x0294]
[    0.797167] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.797169] system 00:01: [io  0x0220-0x0225] has been reserved
[    0.797171] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.797174] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.796900] Switched to NOHz mode on CPU #1
[    0.796903] Switched to NOHz mode on CPU #0
[    0.797262] Switched to NOHz mode on CPU #2
[    0.800511] pnp 00:02: [io  0x4100-0x411f]
[    0.800513] pnp 00:02: [io  0x0228-0x022f]
[    0.800514] pnp 00:02: [io  0x040b]
[    0.800515] pnp 00:02: [io  0x04d6]
[    0.800517] pnp 00:02: [io  0x0c00-0x0c01]
[    0.800518] pnp 00:02: [io  0x0c14]
[    0.800519] pnp 00:02: [io  0x0c50-0x0c52]
[    0.800520] pnp 00:02: [io  0x0c6c-0x0c6d]
[    0.800522] pnp 00:02: [io  0x0c6f]
[    0.800523] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.800524] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.800525] pnp 00:02: [io  0x0cd4-0x0cdf]
[    0.800527] pnp 00:02: [io  0x4000-0x40fe]
[    0.800528] pnp 00:02: [io  0x4210-0x4217]
[    0.800529] pnp 00:02: [io  0x0b00-0x0b0f]
[    0.800530] pnp 00:02: [io  0x0b10-0x0b1f]
[    0.800532] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.800534] pnp 00:02: [mem 0x00000000-0x00000fff window]
[    0.800535] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[    0.800542] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.800573] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[    0.800617] system 00:02: [io  0x4100-0x411f] has been reserved
[    0.800619] system 00:02: [io  0x0228-0x022f] has been reserved
[    0.800621] system 00:02: [io  0x040b] has been reserved
[    0.800623] system 00:02: [io  0x04d6] has been reserved
[    0.800625] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.800627] system 00:02: [io  0x0c14] has been reserved
[    0.800629] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.800631] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
[    0.800632] system 00:02: [io  0x0c6f] has been reserved
[    0.800634] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.800636] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.800638] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
[    0.800640] system 00:02: [io  0x4000-0x40fe] has been reserved
[    0.800642] system 00:02: [io  0x4210-0x4217] has been reserved
[    0.800644] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    0.800646] system 00:02: [io  0x0b10-0x0b1f] has been reserved
[    0.800647] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.800650] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.800653] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.800727] pnp 00:03: [dma 4]
[    0.800729] pnp 00:03: [io  0x0000-0x000f]
[    0.800730] pnp 00:03: [io  0x0080-0x0090]
[    0.800732] pnp 00:03: [io  0x0094-0x009f]
[    0.800733] pnp 00:03: [io  0x00c0-0x00df]
[    0.800754] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.800791] pnp 00:04: [irq 0 disabled]
[    0.800803] pnp 00:04: [irq 8]
[    0.800805] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.800825] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.800843] pnp 00:05: [io  0x0070-0x0073]
[    0.800864] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.800869] pnp 00:06: [io  0x0061]
[    0.800890] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.800896] pnp 00:07: [io  0x00f0-0x00ff]
[    0.800903] pnp 00:07: [irq 13]
[    0.800922] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.801185] pnp 00:08: [io  0x0060]
[    0.801186] pnp 00:08: [io  0x0064]
[    0.801193] pnp 00:08: [irq 12]
[    0.801220] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.801258] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.801294] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.801296] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.801394] pnp 00:0a: [mem 0x000d4400-0x000d7fff]
[    0.801396] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[    0.801397] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[    0.801399] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[    0.801400] pnp 00:0a: [mem 0xafde0000-0xafdfffff]
[    0.801402] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[    0.801403] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[    0.801406] pnp 00:0a: [mem 0x00100000-0xafddffff]
[    0.801408] pnp 00:0a: [mem 0xafef0000-0xcfeeffff]
[    0.801409] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.801411] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.801412] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[    0.801416] pnp 00:0a: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801419] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801422] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801424] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801427] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801430] pnp 00:0a: disabling [mem 0x00100000-0xafddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.801475] system 00:0a: [mem 0xafde0000-0xafdfffff] could not be reserved
[    0.801477] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[    0.801479] system 00:0a: [mem 0xafef0000-0xcfeeffff] could not be reserved
[    0.801481] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.801484] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.801486] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.801488] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.801504] pnp: PnP ACPI: found 11 devices
[    0.801506] ACPI: ACPI bus type pnp unregistered
[    0.807168] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.807170] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.807173] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdffffff]
[    0.807176] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.807181] pci 0000:02:00.0: BAR 6: assigned [mem 0xfda00000-0xfda0ffff pref]
[    0.807183] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.807185] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.807187] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.807189] pci 0000:00:0a.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.807193] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.807195] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.807200] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.807204] pci 0000:00:14.4:   bridge window [mem 0xfdb00000-0xfdbfffff pref]
[    0.807229] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.807232] pci 0000:00:0a.0: setting latency timer to 64
[    0.807238] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.807240] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.807241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.807243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.807245] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.807246] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.807248] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[    0.807250] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.807252] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.807253] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.807255] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.807257] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.807258] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.807260] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[    0.807262] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.807263] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.807265] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.807267] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.807268] pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.807295] NET: Registered protocol family 2
[    0.807411] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.808284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.810347] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.810595] TCP: Hash tables configured (established 524288 bind 65536)
[    0.810597] TCP reno registered
[    0.810608] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.810635] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.810735] NET: Registered protocol family 1
[    0.810745] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.840115] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184
[    1.930125] pci 0000:01:05.0: Boot video device
[    1.930130] PCI: CLS 4 bytes, default 64
[    1.931318] PCI-DMA: Disabling AGP.
[    1.931401] PCI-DMA: aperture base @ a4000000 size 65536 KB
[    1.931402] PCI-DMA: using GART IOMMU.
[    1.931405] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.934232] audit: initializing netlink socket (disabled)
[    1.934241] type=2000 audit(1307301458.930:1): initialized
[    1.944053] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.945345] VFS: Disk quotas dquot_6.5.2
[    1.945383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.945895] fuse init (API version 7.16)
[    1.945954] msgmni has been set to 6901
[    1.946199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.946232] io scheduler noop registered
[    1.946233] io scheduler deadline registered
[    1.946264] io scheduler cfq registered (default)
[    1.946424] pcieport 0000:00:0a.0: setting latency timer to 64
[    1.946454] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[    1.946527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.946545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.946640] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.946644] ACPI: Power Button [PWRB]
[    1.946680] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.946682] ACPI: Power Button [PWRF]
[    1.946793] ACPI: acpi_idle registered with cpuidle
[    1.946806] ACPI: processor limited to max C-state 1
[    2.170830] ERST: Table is not found!
[    2.490374] Linux agpgart interface v0.103
[    2.491122] brd: module loaded
[    2.491457] loop: module loaded
[    2.491541] i2c-core: driver [adp5520] using legacy suspend method
[    2.491542] i2c-core: driver [adp5520] using legacy resume method
[    2.491753] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.492061] Fixed MDIO Bus: probed
[    2.492085] PPP generic driver version 2.4.2
[    2.492133] tun: Universal TUN/TAP device driver, 1.6
[    2.492134] tun: (C) 1999-2004 Max Krasnyansky 
[    2.492202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.492253] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.492282] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.492318] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.570130] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.570153] ehci_hcd 0000:00:12.2: debug port 1
[    2.570179] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[    2.590110] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.590189] hub 1-0:1.0: USB hub found
[    2.590192] hub 1-0:1.0: 6 ports detected
[    2.590302] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.590312] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.590339] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.590364] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.590381] ehci_hcd 0000:00:13.2: debug port 1
[    2.590405] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[    2.610119] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.610182] hub 2-0:1.0: USB hub found
[    2.610185] hub 2-0:1.0: 6 ports detected
[    2.610248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.610290] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.610300] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.610326] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.610368] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[    2.674187] hub 3-0:1.0: USB hub found
[    2.674192] hub 3-0:1.0: 3 ports detected
[    2.674345] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.674354] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    2.674380] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    2.674407] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[    2.734190] hub 4-0:1.0: USB hub found
[    2.734195] hub 4-0:1.0: 3 ports detected
[    2.734354] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.734364] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.734391] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.734430] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[    2.794198] hub 5-0:1.0: USB hub found
[    2.794203] hub 5-0:1.0: 3 ports detected
[    2.794354] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.794363] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.794394] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.794420] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[    2.854195] hub 6-0:1.0: USB hub found
[    2.854200] hub 6-0:1.0: 3 ports detected
[    2.854357] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.854367] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.854397] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.860155] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[    2.924194] hub 7-0:1.0: USB hub found
[    2.924199] hub 7-0:1.0: 2 ports detected
[    2.924291] uhci_hcd: USB Universal Host Controller Interface driver
[    2.924380] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    2.924381] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    2.924970] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.924978] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.925112] mousedev: PS/2 mouse device common for all mice
[    2.925204] rtc_cmos 00:05: RTC can wake from S4
[    2.930126] Refined TSC clocksource calibration: 2913.163 MHz.
[    2.930128] Switching to clocksource tsc
[    2.970102] usb 2-3: new high speed USB device using ehci_hcd and address 2
[    3.000129] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.000160] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.000244] device-mapper: uevent: version 1.0.3
[    3.000295] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[    3.000342] device-mapper: multipath: version 1.2.0 loaded
[    3.000344] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.000430] cpuidle: using governor ladder
[    3.000432] cpuidle: using governor menu
[    3.000598] TCP cubic registered
[    3.000681] NET: Registered protocol family 10
[    3.001047] NET: Registered protocol family 17
[    3.001062] Registering the dns_resolver key type
[    3.001104] powernow-k8: Found 1 AMD Athlon(tm) II X3 435 Processor (3 cpu cores) (version 2.20.00)
[    3.001136] powernow-k8:    0 : pstate 0 (2900 MHz)
[    3.001137] powernow-k8:    1 : pstate 1 (2200 MHz)
[    3.001139] powernow-k8:    2 : pstate 2 (1700 MHz)
[    3.001140] powernow-k8:    3 : pstate 3 (800 MHz)
[    3.001406] PM: Hibernation image not present or could not be loaded.
[    3.001414] registered taskstats version 1
[    3.001604]   Magic number: 15:110:293
[    3.001631] tty tty26: hash matches
[    3.001682] rtc_cmos 00:05: setting system clock to 2011-06-05 19:17:40 UTC (1307301460)
[    3.001684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.001685] EDD information not available.
[    3.002971] Freeing unused kernel memory: 956k freed
[    3.003173] Write protecting the kernel read-only data: 10240k
[    3.003784] Freeing unused kernel memory: 184k freed
[    3.007608] Freeing unused kernel memory: 1444k freed
[    3.025377] udev[101]: starting version 167
[    3.072554] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.072574] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.072611] r8169 0000:02:00.0: setting latency timer to 64
[    3.072652] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[    3.072992] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000668000, 6c:f0:49:73:8a:57, XID 1c4000c0 IRQ 41
[    3.074056] scsi0 : pata_atiixp
[    3.074179] scsi1 : pata_atiixp
[    3.074640] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    3.074642] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    3.074781] ahci 0000:00:11.0: version 3.0
[    3.074805] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.074926] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    3.074929] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    3.076179] scsi2 : ahci
[    3.076276] scsi3 : ahci
[    3.076323] scsi4 : ahci
[    3.076370] scsi5 : ahci
[    3.076443] scsi6 : ahci
[    3.076639] scsi7 : ahci
[    3.076756] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    3.076760] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    3.076763] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    3.076766] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    3.076769] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
[    3.076772] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
[    3.136847] usbcore: registered new interface driver uas
[    3.420135] ata8: SATA link down (SStatus 0 SControl 300)
[    3.420167] ata7: SATA link down (SStatus 0 SControl 300)
[    3.420199] ata5: SATA link down (SStatus 0 SControl 300)
[    3.420228] ata6: SATA link down (SStatus 0 SControl 300)
[    3.420254] ata4: SATA link down (SStatus 0 SControl 300)
[    3.460096] usb 3-3: new low speed USB device using ohci_hcd and address 2
[    3.620131] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.627183] ata3.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[    3.627186] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.628372] ata3.00: configured for UDMA/133
[    3.628503] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[    3.628639] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.628646] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.628682] sd 2:0:0:0: [sda] Write Protect is off
[    3.628684] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.628717] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.652009]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.652350] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.655962] Initializing USB Mass Storage driver...
[    3.656069] scsi8 : usb-storage 2-3:1.0
[    3.656139] usbcore: registered new interface driver usb-storage
[    3.656140] USB Mass Storage support registered.
[    3.666797] usbcore: registered new interface driver usbhid
[    3.666800] usbhid: USB HID core driver
[    3.720217] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
[    3.720297] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[    3.727317] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    3.727779] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input3
[    3.727918] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[    4.234782] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.651187] scsi 8:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[    4.651534] sd 8:0:0:0: Attached scsi generic sg1 type 0
[    4.654033] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   16.990588] udev[343]: starting version 167
[   17.021034] lp: driver loaded but no devices found
[   17.031345] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
[   17.031350] shpchp 0000:00:01.0: Cannot reserve MMIO region
[   17.032226] Adding 4100092k swap on /dev/sda5.  Priority:-1 extents:1 across:4100092k 
[   17.034446] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.120896] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[   17.120900] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.121601] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   17.121668] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   17.125401] MCE: In-kernel MCE decoding enabled.
[   17.128688] EDAC MC: Ver: 2.1.0 Apr 11 2011
[   17.138010] EDAC amd64_edac: v3.3.0
[   17.138633] type=1400 audit(1307294274.624:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
[   17.138908] type=1400 audit(1307294274.624:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
[   17.139085] type=1400 audit(1307294274.624:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
[   17.139345] EDAC amd64: DRAM ECC disabled.
[   17.139355] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   17.139357]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   17.139358]  (Note that use of the override may cause unknown side effects.)
[   17.139481] [drm] Initialized drm 1.1.0 20060810
[   17.253706] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.261202] [drm] radeon defaulting to kernel modesetting.
[   17.261206] [drm] radeon kernel modesetting enabled.
[   17.261329] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   17.261334] radeon 0000:01:05.0: setting latency timer to 64
[   17.262803] [drm] initializing kernel modesetting (RS880 0x1002:0x9710).
[   17.262839] [drm] register mmio base: 0xFDFE0000
[   17.262841] [drm] register mmio size: 65536
[   17.263167] ATOM BIOS: B43106_DVI
[   17.263188] radeon 0000:01:05.0: VRAM: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF (512M used)
[   17.263190] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[   17.263377] [drm] Detected VRAM RAM=512M, BAR=256M
[   17.263381] [drm] RAM width 32bits DDR
[   17.263454] [TTM] Zone  kernel: Available graphics memory: 1768170 kiB.
[   17.263456] [TTM] Initializing pool allocator.
[   17.263474] [drm] radeon: 512M of VRAM memory ready
[   17.263476] [drm] radeon: 512M of GTT memory ready.
[   17.263493] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   17.263494] [drm] Driver supports precise vblank timestamp query.
[   17.263508] [drm] radeon: irq initialized.
[   17.263510] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   17.264308] [drm] Loading RS780 Microcode
[   17.271060] radeon 0000:01:05.0: WB enabled
[   17.302266] [drm] ring test succeeded in 1 usecs
[   17.302348] [drm] radeon: ib pool ready.
[   17.302401] [drm] ib test succeeded in 0 usecs
[   17.302407] [drm] Enabling audio support
[   17.302413] failed to evaluate ATIF got AE_BAD_PARAMETER
[   17.302581] [drm] Radeon Display Connectors
[   17.302582] [drm] Connector 0:
[   17.302584] [drm]   VGA
[   17.302585] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   17.302587] [drm]   Encoders:
[   17.302588] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   17.302589] [drm] Connector 1:
[   17.302590] [drm]   DVI-D
[   17.302591] [drm]   HPD1
[   17.302592] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   17.302594] [drm]   Encoders:
[   17.302595] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
[   17.356684] [drm] radeon: power management initialized
[   17.390319] hda_codec: ALC889A: BIOS auto-probing.
[   17.411313] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   17.441658] [drm] fb mappable at 0xD0141000
[   17.441659] [drm] vram apper at 0xD0000000
[   17.441660] [drm] size 5242880
[   17.441661] [drm] fb depth is 24
[   17.441662] [drm]    pitch is 5120
[   17.441793] Console: switching to colour frame buffer device 160x64
[   17.441815] fb0: radeondrmfb frame buffer device
[   17.441816] drm: registered panic notifier
[   17.441822] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[   17.441920] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   17.441953] HDA Intel 0000:01:05.1: setting latency timer to 64
[   17.862570] EXT4-fs (sda2): re-mounted. Opts: (null)
[   17.920775] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   18.114988] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input5
[   19.481130] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
[   19.534050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   19.604939] ppdev: user-space parallel port driver
[   19.617184] type=1400 audit(1307294277.104:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=883 comm="apparmor_parser"
[   19.617871] type=1400 audit(1307294277.104:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=883 comm="apparmor_parser"
[   19.645528] r8169 0000:02:00.0: eth0: link down
[   19.645547] r8169 0000:02:00.0: eth0: link down
[   19.645909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.686330] type=1400 audit(1307294277.174:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=903 comm="apparmor_parser"
[   19.686528] type=1400 audit(1307294277.174:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=904 comm="apparmor_parser"
[   19.689774] type=1400 audit(1307294277.174:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
[   19.689956] type=1400 audit(1307294277.174:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser"
[   19.690290] type=1400 audit(1307294277.184:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=907 comm="apparmor_parser"
[   20.626942] EXT4-fs (sda2): re-mounted. Opts: commit=0
[   20.685908] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   20.824579] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   21.206955] r8169 0000:02:00.0: eth0: link up
[   21.208054] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.520890] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   21.807746] EXT4-fs (sda2): re-mounted. Opts: commit=0
[   21.814196] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   21.820672] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   31.360148] eth0: no IPv6 routers present
[   57.967893] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[   57.967902] ata4: irq_stat 0x00400040, connection status changed
[   57.967912] ata4: SError: { PHYRdyChg CommWake 10B8B DevExch }
[   57.967926] ata4: hard resetting link
[   68.000164] ata4: softreset failed (device not ready)
[   68.000176] ata4: hard resetting link
[   71.270208] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   71.286534] ata4.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[   71.286544] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   71.287895] ata4.00: configured for UDMA/133
[   71.300166] ata4: EH complete
[   71.300353] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[   71.300794] sd 3:0:0:0: Attached scsi generic sg2 type 0
[   71.300836] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[   71.300954] sd 3:0:0:0: [sdc] Write Protect is off
[   71.300963] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   71.301013] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   71.305378]  sdc: sdc1
[   71.305923] sd 3:0:0:0: [sdc] Attached SCSI disk
[   83.251242] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   87.177615] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[   87.212089] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 1732.420207] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1732.574038] scsi9 : usb-storage 2-5:1.0
[ 1734.406313] scsi 9:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
[ 1734.407688] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 1734.410214] sd 9:0:0:0: [sdd] 15532032 512-byte logical blocks: (7.95 GB/7.40 GiB)
[ 1734.411891] sd 9:0:0:0: [sdd] Write Protect is off
[ 1734.411903] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 1734.413813] sd 9:0:0:0: [sdd] No Caching mode page present
[ 1734.413822] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[ 1734.419531] sd 9:0:0:0: [sdd] No Caching mode page present
[ 1734.419542] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[ 1734.420585]  sdd: sdd1
[ 1734.424060] sd 9:0:0:0: [sdd] No Caching mode page present
[ 1734.424071] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[ 1734.424078] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[ 1737.399055] usb 2-5: USB disconnect, address 3
[ 8318.059430] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 8318.368925] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 8318.374848] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 8319.835904] PM: Syncing filesystems ... done.
[ 8319.838696] PM: Preparing system for mem sleep
[ 8320.012818] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8320.030120] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8320.050117] PM: Entering mem sleep
[ 8320.050131] Suspending console(s) (use no_console_suspend to debug)
[ 8320.050352] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 8320.050461] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 8320.050499] sd 3:0:0:0: [sdc] Stopping disk
[ 8320.050583] sd 2:0:0:0: [sda] Stopping disk
[ 8320.062313] i8042 aux 00:08: wake-up capability disabled by ACPI
[ 8320.070091] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 8320.070222] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 8320.070232] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 8320.070256] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 8320.070268] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 8320.070276] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 8320.090057] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 8320.170062] HDA Intel 0000:01:05.1: PCI INT B disabled
[ 8320.170078] ACPI handle has no context!
[ 8320.180131] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 8320.190013] PM: suspend of drv:HDA Intel dev:0000:01:05.1 complete after 127.672 msecs
[ 8320.200026] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 129.925 msecs
[ 8320.224556] [drm] Disabling audio support
[ 8320.259466] radeon 0000:01:05.0: PCI INT A disabled
[ 8320.270101] PM: suspend of drv:radeon dev:0000:01:05.0 complete after 207.734 msecs
[ 8320.270136] PM: suspend of drv:pci dev:0000:00:01.0 complete after 199.509 msecs
[ 8320.743380] PM: suspend of drv:sd dev:3:0:0:0 complete after 693.037 msecs
[ 8320.743395] PM: suspend of drv:scsi dev:target3:0:0 complete after 692.999 msecs
[ 8320.743405] PM: suspend of drv:scsi dev:host3 complete after 692.825 msecs
[ 8320.821987] PM: suspend of drv:sd dev:2:0:0:0 complete after 771.528 msecs
[ 8320.822000] PM: suspend of drv:scsi dev:target2:0:0 complete after 771.489 msecs
[ 8320.822013] PM: suspend of drv:scsi dev:host2 complete after 771.408 msecs
[ 8320.840259] ahci 0000:00:11.0: PCI INT A disabled
[ 8320.860106] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 789.827 msecs
[ 8320.860134] PM: suspend of drv: dev:pci0000:00 complete after 789.500 msecs
[ 8320.860141] PM: suspend of devices complete after 809.818 msecs
[ 8320.860143] PM: suspend devices took 0.810 seconds
[ 8320.860312] r8169 0000:02:00.0: PME# enabled
[ 8320.860322] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8320.920174] PM: late suspend of devices complete after 60.028 msecs
[ 8320.920225] ACPI: Preparing to enter system sleep state S3
[ 8320.920403] PM: Saving platform NVS memory
[ 8320.920421] Disabling non-boot CPUs ...
[ 8335.424646] Clocksource tsc unstable (delta = -8589933001 ns)
[ 8335.424785] Switching to clocksource hpet
[ 8335.500318] Broke affinity for irq 19
[ 8335.610106] CPU 1 is now offline
[ 8335.790106] CPU 2 is now offline
[ 8335.790324] Back to C!
[ 8335.790324] PM: Restoring platform NVS memory
[ 8335.790324] PCI-DMA: Resuming GART IOMMU
[ 8335.790324] PCI-DMA: Restoring GART aperture settings
[ 8335.790324] Enabling non-boot CPUs ...
[ 8335.790324] Booting Node 0 Processor 1 APIC 0x1
[ 8335.501347] Switch to broadcast mode on CPU1
[ 8335.980116] Switched to NOHz mode on CPU #1
[ 8336.000393] CPU1 is up
[ 8336.000507] Booting Node 0 Processor 2 APIC 0x2
[ 8335.681244] Switch to broadcast mode on CPU2
[ 8336.190123] Switched to NOHz mode on CPU #2
[ 8336.230443] CPU2 is up
[ 8336.230626] ACPI: Waking up from system sleep state S3
[ 8336.230831] pci 0000:00:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000004)
[ 8336.230835] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[ 8336.230851] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2220e1e1, writing 0x220e1e1)
[ 8336.230870] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8336.230893] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 8336.250133] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfe02c000-0xfe02c0ff] (PCI address [0xfe02c000-0xfe02c0ff])
[ 8336.250158] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012)
[ 8336.270117] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfe029000-0xfe0290ff] (PCI address [0xfe029000-0xfe0290ff])
[ 8336.270142] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00012)
[ 8336.270218] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x100, writing 0x5)
[ 8336.270233] HDA Intel 0000:00:14.2: restoring config space at offset 0x3 (was 0x0, writing 0x2001)
[ 8336.270362] HDA Intel 0000:01:05.1: restoring config space at offset 0xf (was 0x2ff, writing 0x207)
[ 8336.270369] HDA Intel 0000:01:05.1: restoring config space at offset 0x4 (was 0x0, writing 0xfdffc000)
[ 8336.270372] HDA Intel 0000:01:05.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800001)
[ 8336.270376] HDA Intel 0000:01:05.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 8336.270411] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 8336.270967] PM: early resume of devices complete after 40.237 msecs
[ 8336.271098] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8336.271105] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8336.271116] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8336.271156] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8336.271180] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8336.271210] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8336.271232] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8336.271270] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8336.271314] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8336.271357] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8336.271360] radeon 0000:01:05.0: setting latency timer to 64
[ 8336.271370] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8336.271374] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 8336.271399] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8336.271404] r8169 0000:02:00.0: PME# disabled
[ 8336.273309] sd 2:0:0:0: [sda] Starting disk
[ 8336.273545] sd 3:0:0:0: [sdc] Starting disk
[ 8336.283588] radeon 0000:01:05.0: WB enabled
[ 8336.314687] [drm] ring test succeeded in 1 usecs
[ 8336.314697] [drm] ib test succeeded in 0 usecs
[ 8336.314698] [drm] Enabling audio support
[ 8336.380150] PM: resume of drv:usb dev:usb1 complete after 108.085 msecs
[ 8336.380168] PM: resume of drv:hub dev:1-0:1.0 complete after 108.098 msecs
[ 8336.380170] PM: resume of drv: dev:ep_00 complete after 107.427 msecs
[ 8336.380183] PM: resume of drv: dev:ep_81 complete after 107.448 msecs
[ 8336.400396] PM: resume of drv:usb dev:2-3 complete after 127.182 msecs
[ 8336.400409] PM: resume of drv: dev:ep_00 complete after 127.120 msecs
[ 8336.400412] PM: resume of drv:usb-storage dev:2-3:1.0 complete after 127.180 msecs
[ 8336.400424] PM: resume of drv: dev:ep_01 complete after 127.176 msecs
[ 8336.400430] PM: resume of drv: dev:ep_82 complete after 127.167 msecs
[ 8336.400433] PM: resume of drv:scsi dev:host8 complete after 127.051 msecs
[ 8336.400445] PM: resume of drv:scsi dev:target8:0:0 complete after 126.950 msecs
[ 8336.400447] PM: resume of drv:scsi_host dev:host8 complete after 127.049 msecs
[ 8336.400466] PM: resume of drv:sd dev:8:0:0:0 complete after 126.953 msecs
[ 8336.400477] PM: resume of drv:scsi_device dev:8:0:0:0 complete after 126.948 msecs
[ 8336.410124] PM: resume of drv:usb dev:usb3 complete after 137.274 msecs
[ 8336.410138] PM: resume of drv:hub dev:3-0:1.0 complete after 137.272 msecs
[ 8336.410141] PM: resume of drv:usb dev:usb5 complete after 137.162 msecs
[ 8336.410146] PM: resume of drv: dev:ep_00 complete after 137.247 msecs
[ 8336.410149] PM: resume of drv: dev:ep_81 complete after 137.267 msecs
[ 8336.410156] PM: resume of drv:hub dev:5-0:1.0 complete after 137.162 msecs
[ 8336.410164] PM: resume of drv:usb dev:usb6 complete after 137.120 msecs
[ 8336.410165] PM: resume of drv: dev:ep_00 complete after 137.137 msecs
[ 8336.410169] PM: resume of drv: dev:ep_81 complete after 137.158 msecs
[ 8336.410175] PM: resume of drv: dev:ep_00 complete after 137.083 msecs
[ 8336.410190] PM: resume of drv:hub dev:6-0:1.0 complete after 137.130 msecs
[ 8336.410201] PM: resume of drv: dev:ep_81 complete after 137.126 msecs
[ 8336.420136] PM: resume of drv:usb dev:usb7 complete after 147.029 msecs
[ 8336.420139] PM: resume of drv:usb dev:usb4 complete after 147.224 msecs
[ 8336.420154] PM: resume of drv:hub dev:4-0:1.0 complete after 147.224 msecs
[ 8336.420156] PM: resume of drv:hub dev:7-0:1.0 complete after 147.032 msecs
[ 8336.420171] PM: resume of drv: dev:ep_00 complete after 147.209 msecs
[ 8336.420175] PM: resume of drv: dev:ep_00 complete after 147.021 msecs
[ 8336.420178] PM: resume of drv: dev:ep_81 complete after 147.040 msecs
[ 8336.420180] PM: resume of drv: dev:ep_81 complete after 147.233 msecs
[ 8336.473316] PM: resume of drv:usb dev:3-3 complete after 199.948 msecs
[ 8336.473330] PM: resume of drv:usbhid dev:3-3:1.0 complete after 199.914 msecs
[ 8336.473347] PM: resume of drv: dev:ep_00 complete after 199.868 msecs
[ 8336.473352] PM: resume of drv:usbhid dev:3-3:1.1 complete after 199.905 msecs
[ 8336.473367] PM: resume of drv: dev:ep_81 complete after 199.933 msecs
[ 8336.473370] PM: resume of drv: dev:ep_82 complete after 199.901 msecs
[ 8336.610124] ata8: SATA link down (SStatus 0 SControl 300)
[ 8336.610162] ata6: SATA link down (SStatus 0 SControl 300)
[ 8336.620140] ata5: SATA link down (SStatus 0 SControl 300)
[ 8336.620165] ata7: SATA link down (SStatus 0 SControl 300)
[ 8336.620189] ata4: SATA link down (SStatus 0 SControl 300)
[ 8341.970120] ata4: SATA link down (SStatus 0 SControl 300)
[ 8341.970127] ata4: limiting SATA link speed to 1.5 Gbps
[ 8498.237845] psmouse.c: MX Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[ 8498.410152] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8498.419518] ata3.00: configured for UDMA/133
[ 8498.435451] PM: resume of drv:sd dev:2:0:0:0 complete after 162162.141 msecs
[ 8498.435467] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 162162.114 msecs
[ 8498.435481] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 162125.068 msecs
[ 8498.580144] ata4: SATA link down (SStatus 0 SControl 310)
[ 8498.580152] ata4.00: disabled
[ 8498.580160] sd 3:0:0:0: rejecting I/O to offline device
[ 8498.580184] sd 3:0:0:0: [sdc] START_STOP FAILED
[ 8498.580185] sd 3:0:0:0: [sdc]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 8498.580196] pm_op(): scsi_bus_resume_common+0x0/0x60 returns 65536
[ 8498.580204] PM: Device 3:0:0:0 failed to resume async: error 65536
[ 8498.580209] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 162306.635 msecs
[ 8498.580212] PM: resume of drv:scsi_disk dev:3:0:0:0 complete after 144.513 msecs
[ 8498.580233] PM: resume of devices complete after 162309.212 msecs
[ 8498.580386] PM: resume devices took 162.310 seconds
[ 8498.580387] ------------[ cut here ]------------
[ 8498.580392] WARNING: at /build/buildd/linux-2.6.38/kernel/power/suspend_test.c:53 suspend_test_finish+0x86/0x90()
[ 8498.580394] Hardware name: GA-MA785GMT-UD2H
[ 8498.580395] Component: resume devices, time: 162310
[ 8498.580396] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat binfmt_misc parport_pc ppdev snd_hda_codec_hdmi snd_hda_codec_realtek snd_seq_midi radeon snd_rawmidi snd_hda_intel snd_hda_codec snd_hwdep psmouse snd_seq_midi_event snd_seq ttm snd_pcm drm_kms_helper serio_raw snd_seq_device joydev k10temp edac_core edac_mce_amd sp5100_tco snd_timer i2c_piix4 drm snd i2c_algo_bit soundcore snd_page_alloc shpchp lp parport hid_logitech ff_memless usbhid hid usb_storage uas ahci r8169 pata_atiixp libahci
[ 8498.580418] Pid: 7731, comm: pm-suspend Not tainted 2.6.38-8-generic #42-Ubuntu
[ 8498.580419] Call Trace:
[ 8498.580424]  [] ? warn_slowpath_common+0x7f/0xc0
[ 8498.580426]  [] ? warn_slowpath_fmt+0x46/0x50
[ 8498.580428]  [] ? suspend_test_finish+0x86/0x90
[ 8498.580431]  [] ? suspend_devices_and_enter+0xac/0x170
[ 8498.580433]  [] ? enter_state+0x120/0x150
[ 8498.580435]  [] ? state_store+0xc6/0x100
[ 8498.580438]  [] ? kobj_attr_store+0x17/0x20
[ 8498.580441]  [] ? sysfs_write_file+0xde/0x160
[ 8498.580444]  [] ? vfs_write+0xc6/0x180
[ 8498.580450]  [] ? sys_write+0x51/0x90
[ 8498.580453]  [] ? system_call_fastpath+0x16/0x1b
[ 8498.580455] ---[ end trace 90e198474b3efe58 ]---
[ 8498.580576] PM: Finishing wakeup.
[ 8498.580577] Restarting tasks ... done.
[ 8498.601149] ata4.00: detaching (SCSI 3:0:0:0)
[ 8498.601634] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 8498.630340] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 8498.630375] sd 3:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 8498.630378] sd 3:0:0:0: [sdc] Stopping disk
[ 8498.630384] sd 3:0:0:0: [sdc] START_STOP FAILED
[ 8498.630385] sd 3:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 8499.437616] r8169 0000:02:00.0: eth0: link down
[ 8499.437633] r8169 0000:02:00.0: eth0: link down
[ 8499.438203] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8500.999169] r8169 0000:02:00.0: eth0: link up
[ 8501.000364] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8501.545762] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 8501.814018] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 8501.820273] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 8502.930074] CE: hpet increased min_delta_ns to 20113 nsec
[ 8511.220140] eth0: no IPv6 routers present
[ 8672.990312] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 8673.240357] IR NEC protocol handler initialized
[ 8673.253582] IR RC5(x) protocol handler initialized
[ 8673.258831] IR RC6 protocol handler initialized
[ 8673.270641] IR JVC protocol handler initialized
[ 8673.273135] IR Sony protocol handler initialized
[ 8673.297312] lirc_dev: IR Remote Control driver registered, major 250 
[ 8673.308598] dib0700: loaded with support for 15 different device-types
[ 8673.308781] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 8673.311872] IR LIRC bridge handler initialized
[ 8673.338563] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 8673.741595] dib0700: firmware started successfully.
[ 8674.250471] dvb-usb: found a 'Pinnacle PCTV 72e' in warm state.
[ 8674.250590] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 8674.250733] DVB: registering new adapter (Pinnacle PCTV 72e)
[ 8674.487935] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 8674.728405] DiB0070: successfully identified
[ 8674.770147] Registered IR keymap rc-dib0700-rc5
[ 8674.770467] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0/input6
[ 8674.770609] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0
[ 8674.770815] dvb-usb: schedule remote query interval to 50 msecs.
[ 8674.770823] dvb-usb: Pinnacle PCTV 72e successfully initialized and connected.
[ 8674.770981] usbcore: registered new interface driver dvb_usb_dib0700

Return To 110605_2325 System Information