dmesg - aiostress
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-9-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #43-Ubuntu SMP Thu Apr 28 15:23:06 UTC 2011 (Ubuntu 2.6.38-9.43-generic 2.6.38.4)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. 965P-DS3/965P-DS3, BIOS F12 05/28/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5360] f5360
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000
[ 0.000000] RAMDISK: 35b6c000 - 36dae000
[ 0.000000] ACPI: RSDP 00000000000f6cf0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee3180 049F4 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000dfee7bc0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee7dc0 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000dfee8250 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800dfc00000 s84416 r8192 d22080 u524288
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4034672k/4718592k available (5941k kernel code, 525892k absent, 158028k reserved, 5016k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2009.747 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.49 BogoMIPS (lpj=20097470)
[ 0.010009] pid_max: default: 32768 minimum: 301
[ 0.010041] Security Framework initialized
[ 0.010060] AppArmor: AppArmor initialized
[ 0.010062] Yama: becoming mindful.
[ 0.010573] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013132] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014336] Mount-cache hash table entries: 256
[ 0.014521] Initializing cgroup subsys ns
[ 0.014527] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.014531] Initializing cgroup subsys cpuacct
[ 0.014536] Initializing cgroup subsys memory
[ 0.014546] Initializing cgroup subsys devices
[ 0.014549] Initializing cgroup subsys freezer
[ 0.014551] Initializing cgroup subsys net_cls
[ 0.014553] Initializing cgroup subsys blkio
[ 0.014594] CPU: Physical Processor ID: 0
[ 0.014596] CPU: Processor Core ID: 0
[ 0.014599] mce: CPU supports 6 MCE banks
[ 0.014608] CPU0: Thermal monitoring enabled (TM2)
[ 0.014613] using mwait in idle threads.
[ 0.017466] ACPI: Core revision 20110112
[ 0.021044] ftrace: allocating 24316 entries in 96 pages
[ 0.030070] Setting APIC routing to flat
[ 0.030378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.133334] CPU0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
[ 0.140000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.140000] PEBS disabled due to CPU errata.
[ 0.140000] ... version: 2
[ 0.140000] ... bit width: 40
[ 0.140000] ... generic registers: 2
[ 0.140000] ... value mask: 000000ffffffffff
[ 0.140000] ... max period: 000000007fffffff
[ 0.140000] ... fixed-purpose events: 3
[ 0.140000] ... event mask: 0000000700000003
[ 0.140000] Booting Node 0, Processors #1
[ 0.300020] Brought up 2 CPUs
[ 0.300024] Total of 2 processors activated (8039.52 BogoMIPS).
[ 0.300973] devtmpfs: initialized
[ 0.300973] print_constraints: dummy:
[ 0.300990] Time: 9:14:07 Date: 05/28/11
[ 0.301029] NET: Registered protocol family 16
[ 0.301063] Trying to unpack rootfs image as initramfs...
[ 0.301168] ACPI: bus type pci registered
[ 0.301245] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.301249] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.314283] PCI: Using configuration type 1 for base access
[ 0.314327] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.314329] mtrr: probably your BIOS does not setup all CPUs.
[ 0.314331] mtrr: corrected configuration.
[ 0.330055] bio: create slab at 0
[ 0.331126] ACPI: EC: Look up EC in DSDT
[ 0.335216] ACPI: SSDT 00000000dfee81c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.335436] ACPI: Dynamic OEM Table Load:
[ 0.335440] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.335606] ACPI: Interpreter enabled
[ 0.335609] ACPI: (supports S0 S1 S4 S5)
[ 0.335630] ACPI: Using IOAPIC for interrupt routing
[ 0.340453] ACPI: No dock devices found.
[ 0.340456] HEST: Table not found.
[ 0.340459] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.340523] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.340644] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.340647] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.340650] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.340653] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.340655] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored)
[ 0.340667] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.340714] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.340750] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.340753] pci 0000:00:01.0: PME# disabled
[ 0.340795] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.340837] pci 0000:00:1a.0: reg 20: [io 0xd000-0xd01f]
[ 0.340867] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.340909] pci 0000:00:1a.1: reg 20: [io 0xc000-0xc01f]
[ 0.340953] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.340972] pci 0000:00:1a.7: reg 10: [mem 0xfa201000-0xfa2013ff]
[ 0.341054] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.341112] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.341116] pci 0000:00:1c.0: PME# disabled
[ 0.341141] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.341197] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.341201] pci 0000:00:1c.3: PME# disabled
[ 0.341223] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.341281] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.341286] pci 0000:00:1c.4: PME# disabled
[ 0.341310] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.341351] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.341382] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.341423] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.341454] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.341498] pci 0000:00:1d.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.341537] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.341554] pci 0000:00:1d.7: reg 10: [mem 0xfa200000-0xfa2003ff]
[ 0.341636] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.341694] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.341784] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.341788] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.341824] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
[ 0.341838] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.341847] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.341856] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.341864] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.341873] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.341881] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f]
[ 0.341905] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.341909] pci 0000:00:1f.2: PME# disabled
[ 0.341921] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.341933] pci 0000:00:1f.3: reg 10: [mem 0xfa202000-0xfa2020ff]
[ 0.341961] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.341997] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
[ 0.342012] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd807]
[ 0.342020] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc03]
[ 0.342029] pci 0000:00:1f.5: reg 18: [io 0xe000-0xe007]
[ 0.342037] pci 0000:00:1f.5: reg 1c: [io 0xe400-0xe403]
[ 0.342046] pci 0000:00:1f.5: reg 20: [io 0xe800-0xe80f]
[ 0.342055] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.342077] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.342081] pci 0000:00:1f.5: PME# disabled
[ 0.342129] pci 0000:01:00.0: [10de:0622] type 0 class 0x000300
[ 0.342140] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.342153] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.342165] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.342173] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]
[ 0.342181] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.342230] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.342234] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.342237] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.342242] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.342284] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.342289] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.342293] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.342300] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.342360] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.342451] pci 0000:03:00.0: reg 24: [mem 0xfa000000-0xfa001fff]
[ 0.342496] pci 0000:03:00.0: PME# supported from D3hot
[ 0.342502] pci 0000:03:00.0: PME# disabled
[ 0.342533] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.342558] pci 0000:03:00.1: reg 10: [io 0x8000-0x8007]
[ 0.342573] pci 0000:03:00.1: reg 14: [io 0x8400-0x8403]
[ 0.342588] pci 0000:03:00.1: reg 18: [io 0x8800-0x8807]
[ 0.342602] pci 0000:03:00.1: reg 1c: [io 0x8c00-0x8c03]
[ 0.342617] pci 0000:03:00.1: reg 20: [io 0x9000-0x900f]
[ 0.342689] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.342703] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.342707] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.342712] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.342718] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.342782] pci 0000:04:00.0: [11ab:4364] type 0 class 0x000200
[ 0.342807] pci 0000:04:00.0: reg 10: [mem 0xf9000000-0xf9003fff 64bit]
[ 0.342820] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
[ 0.342866] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.342907] pci 0000:04:00.0: supports D1 D2
[ 0.342909] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.342915] pci 0000:04:00.0: PME# disabled
[ 0.360028] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.360034] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.360038] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.360044] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.360086] pci 0000:05:01.0: [1131:7130] type 0 class 0x000480
[ 0.360105] pci 0000:05:01.0: reg 10: [mem 0xfa100000-0xfa1003ff]
[ 0.360177] pci 0000:05:01.0: supports D1 D2
[ 0.360196] pci 0000:05:02.0: [1102:0002] type 0 class 0x000401
[ 0.360215] pci 0000:05:02.0: reg 10: [io 0xb000-0xb01f]
[ 0.360307] pci 0000:05:02.1: [1102:7002] type 0 class 0x000980
[ 0.360325] pci 0000:05:02.1: reg 10: [io 0xb400-0xb407]
[ 0.360443] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.360447] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.360452] pci 0000:00:1e.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.360459] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.360462] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.360465] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.360495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.360651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.360694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.360743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.360782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.360907] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.369306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.369361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.369415] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.369466] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.369518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.369571] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.369623] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.369680] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.369823] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.369829] vgaarb: loaded
[ 0.370059] SCSI subsystem initialized
[ 0.370145] libata version 3.00 loaded.
[ 0.370198] usbcore: registered new interface driver usbfs
[ 0.370211] usbcore: registered new interface driver hub
[ 0.370242] usbcore: registered new device driver usb
[ 0.370373] wmi: Mapper loaded
[ 0.370375] PCI: Using ACPI for IRQ routing
[ 0.370379] PCI: pci_cache_line_size set to 64 bytes
[ 0.370487] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.370490] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.370602] NetLabel: Initializing
[ 0.370604] NetLabel: domain hash size = 128
[ 0.370606] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.370620] NetLabel: unlabeled traffic allowed by default
[ 0.370657] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.370662] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.370667] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.390099] Switching to clocksource hpet
[ 0.399228] AppArmor: AppArmor Filesystem Enabled
[ 0.399264] pnp: PnP ACPI init
[ 0.399284] ACPI: bus type pnp registered
[ 0.399400] pnp 00:00: [bus 00-3f]
[ 0.399404] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.399406] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.399409] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.399411] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.399414] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.399416] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.399489] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.399577] pnp 00:01: [io 0x0010-0x001f]
[ 0.399580] pnp 00:01: [io 0x0022-0x003f]
[ 0.399582] pnp 00:01: [io 0x0044-0x005f]
[ 0.399584] pnp 00:01: [io 0x0062-0x0063]
[ 0.399586] pnp 00:01: [io 0x0065-0x006f]
[ 0.399588] pnp 00:01: [io 0x0074-0x007f]
[ 0.399590] pnp 00:01: [io 0x0091-0x0093]
[ 0.399592] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.399598] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.399600] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.399602] pnp 00:01: [io 0x0290-0x029f]
[ 0.399604] pnp 00:01: [io 0x0800-0x087f]
[ 0.399606] pnp 00:01: [io 0x0290-0x0294]
[ 0.399608] pnp 00:01: [io 0x0880-0x088f]
[ 0.399708] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.399711] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.399714] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.399717] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.399720] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.399724] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399737] pnp 00:02: [dma 4]
[ 0.399739] pnp 00:02: [io 0x0000-0x000f]
[ 0.399741] pnp 00:02: [io 0x0080-0x0090]
[ 0.399744] pnp 00:02: [io 0x0094-0x009f]
[ 0.399746] pnp 00:02: [io 0x00c0-0x00df]
[ 0.399784] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.399802] pnp 00:03: [io 0x0070-0x0073]
[ 0.399815] pnp 00:03: [irq 8]
[ 0.399851] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.399861] pnp 00:04: [io 0x0061]
[ 0.399901] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.399913] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.399918] pnp 00:05: [irq 13]
[ 0.399835] Switched to NOHz mode on CPU #0
[ 0.399955] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.399955] Switched to NOHz mode on CPU #1
[ 0.399993] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.399995] pnp 00:06: [io 0x03f7]
[ 0.400008] pnp 00:06: [irq 6]
[ 0.400010] pnp 00:06: [dma 2]
[ 0.400067] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.400242] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.400248] pnp 00:07: [irq 4]
[ 0.400312] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.400500] pnp 00:08: [io 0x0378-0x037f]
[ 0.400506] pnp 00:08: [irq 7]
[ 0.400568] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.400665] pnp 00:09: [io 0x0060]
[ 0.400667] pnp 00:09: [io 0x0064]
[ 0.400673] pnp 00:09: [irq 1]
[ 0.400712] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.400747] pnp 00:0a: [io 0x0400-0x04bf]
[ 0.400812] system 00:0a: [io 0x0400-0x04bf] has been reserved
[ 0.400816] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401028] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[ 0.401102] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.401106] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401265] pnp 00:0c: [mem 0x000ce400-0x000cffff]
[ 0.401268] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.401270] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.401273] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.401275] pnp 00:0c: [mem 0xdfee0000-0xdfefffff]
[ 0.401277] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.401279] pnp 00:0c: [mem 0x00100000-0xdfedffff]
[ 0.401281] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.401283] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[ 0.401285] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.401287] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.401289] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.401292] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.401294] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.401378] system 00:0c: [mem 0x000ce400-0x000cffff] has been reserved
[ 0.401381] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.401384] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.401387] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.401390] system 00:0c: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.401393] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.401396] system 00:0c: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.401399] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.401402] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.401405] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.401408] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.401411] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.401414] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.401417] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.401420] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.401445] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.401502] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.401509] pnp: PnP ACPI: found 14 devices
[ 0.401511] ACPI: ACPI bus type pnp unregistered
[ 0.408075] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa300000-0xfa4fffff]
[ 0.408082] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa500000-0xfa6fffff 64bit pref]
[ 0.408087] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa700000-0xfa8fffff 64bit pref]
[ 0.408092] pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa900000-0xfaafffff pref]
[ 0.408096] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref]
[ 0.408099] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.408102] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.408107] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.408110] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.408115] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.408119] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.408124] pci 0000:00:1c.0: bridge window [mem 0xfa300000-0xfa4fffff]
[ 0.408129] pci 0000:00:1c.0: bridge window [mem 0xfa500000-0xfa6fffff 64bit pref]
[ 0.408136] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.408139] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.408144] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfa0fffff]
[ 0.408148] pci 0000:00:1c.3: bridge window [mem 0xfa700000-0xfa8fffff 64bit pref]
[ 0.408156] pci 0000:04:00.0: BAR 6: assigned [mem 0xfa900000-0xfa91ffff pref]
[ 0.408158] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.408161] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 0.408166] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.408171] pci 0000:00:1c.4: bridge window [mem 0xfa900000-0xfaafffff pref]
[ 0.408177] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.408180] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.408186] pci 0000:00:1e.0: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.408190] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.408213] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.408217] pci 0000:00:01.0: setting latency timer to 64
[ 0.408225] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.408229] pci 0000:00:1c.0: setting latency timer to 64
[ 0.408239] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.408243] pci 0000:00:1c.3: setting latency timer to 64
[ 0.408250] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.408254] pci 0000:00:1c.4: setting latency timer to 64
[ 0.408261] pci 0000:00:1e.0: setting latency timer to 64
[ 0.408265] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.408267] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.408270] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.408273] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.408275] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.408278] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.408280] pci_bus 0000:02: resource 1 [mem 0xfa300000-0xfa4fffff]
[ 0.408283] pci_bus 0000:02: resource 2 [mem 0xfa500000-0xfa6fffff 64bit pref]
[ 0.408286] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
[ 0.408288] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
[ 0.408291] pci_bus 0000:03: resource 2 [mem 0xfa700000-0xfa8fffff 64bit pref]
[ 0.408293] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.408295] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.408298] pci_bus 0000:04: resource 2 [mem 0xfa900000-0xfaafffff pref]
[ 0.408301] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.408303] pci_bus 0000:05: resource 1 [mem 0xfa100000-0xfa1fffff]
[ 0.408305] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.408308] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.408360] NET: Registered protocol family 2
[ 0.408547] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.409983] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.415299] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.415911] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.415914] TCP reno registered
[ 0.415930] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.415991] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.416158] NET: Registered protocol family 1
[ 0.416345] pci 0000:01:00.0: Boot video device
[ 0.416365] PCI: CLS 32 bytes, default 64
[ 0.416368] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.416371] Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
[ 0.416373] software IO TLB at phys 0xdbc00000 - 0xdfc00000
[ 0.416785] audit: initializing netlink socket (disabled)
[ 0.416796] type=2000 audit(1306574047.410:1): initialized
[ 0.431783] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.433803] VFS: Disk quotas dquot_6.5.2
[ 0.433868] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.434574] fuse init (API version 7.16)
[ 0.434675] msgmni has been set to 7880
[ 0.434931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.434961] io scheduler noop registered
[ 0.434963] io scheduler deadline registered
[ 0.435007] io scheduler cfq registered (default)
[ 0.435146] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.435185] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.435244] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.435282] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.435342] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.435380] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.435439] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.435477] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.435565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.435591] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.435646] intel_idle: MWAIT substates: 0x20
[ 0.435649] intel_idle: does not run on family 6 model 15
[ 0.435759] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.435765] ACPI: Power Button [PWRB]
[ 0.435834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.435838] ACPI: Power Button [PWRF]
[ 0.436044] ACPI: acpi_idle registered with cpuidle
[ 0.437568] ERST: Table is not found!
[ 0.458197] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.706390] Freeing initrd memory: 18696k freed
[ 0.772668] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.772991] Linux agpgart interface v0.103
[ 0.774470] brd: module loaded
[ 0.775060] loop: module loaded
[ 0.775157] i2c-core: driver [adp5520] using legacy suspend method
[ 0.775159] i2c-core: driver [adp5520] using legacy resume method
[ 0.775279] ata_piix 0000:00:1f.2: version 2.13
[ 0.775296] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.775302] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.930063] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.930494] scsi0 : ata_piix
[ 0.930597] scsi1 : ata_piix
[ 0.931117] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.931123] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.931171] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.931186] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.931229] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.931485] scsi2 : ata_piix
[ 0.931563] scsi3 : ata_piix
[ 0.932037] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe800 irq 19
[ 0.932041] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma 0xe808 irq 19
[ 0.932117] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.932124] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.932155] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.932170] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.932494] Fixed MDIO Bus: probed
[ 0.932526] PPP generic driver version 2.4.2
[ 0.932583] tun: Universal TUN/TAP device driver, 1.6
[ 0.932585] tun: (C) 1999-2004 Max Krasnyansky
[ 0.932686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.932710] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.932731] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.932735] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.932776] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.936716] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.936732] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa201000
[ 0.960037] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.960252] hub 1-0:1.0: USB hub found
[ 0.960257] hub 1-0:1.0: 4 ports detected
[ 0.960340] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.960352] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.960356] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.960395] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.964335] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.964349] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa200000
[ 0.980040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.980230] hub 2-0:1.0: USB hub found
[ 0.980249] hub 2-0:1.0: 6 ports detected
[ 0.980336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.980350] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.980410] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.980419] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.980423] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.980464] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.980517] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d000
[ 0.980645] hub 3-0:1.0: USB hub found
[ 0.980650] hub 3-0:1.0: 2 ports detected
[ 0.980726] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.980735] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.980738] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.980782] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.980834] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c000
[ 0.980959] hub 4-0:1.0: USB hub found
[ 0.980964] hub 4-0:1.0: 2 ports detected
[ 0.981036] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.981043] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.981046] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.981091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.990078] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.990269] hub 5-0:1.0: USB hub found
[ 0.990273] hub 5-0:1.0: 2 ports detected
[ 0.990344] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.990350] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.990354] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.990397] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.990444] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.990568] hub 6-0:1.0: USB hub found
[ 0.990573] hub 6-0:1.0: 2 ports detected
[ 0.990644] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.990650] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.990654] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.990697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.990741] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00
[ 0.990874] hub 7-0:1.0: USB hub found
[ 0.990878] hub 7-0:1.0: 2 ports detected
[ 0.991008] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.991010] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.991137] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.991245] mousedev: PS/2 mouse device common for all mice
[ 0.991375] rtc_cmos 00:03: RTC can wake from S4
[ 0.991443] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.991467] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.991579] device-mapper: uevent: version 1.0.3
[ 0.991659] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.991737] device-mapper: multipath: version 1.2.0 loaded
[ 0.991742] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.991870] cpuidle: using governor ladder
[ 0.991872] cpuidle: using governor menu
[ 0.992142] TCP cubic registered
[ 0.992283] NET: Registered protocol family 10
[ 0.992814] NET: Registered protocol family 17
[ 0.992829] Registering the dns_resolver key type
[ 0.994180] PM: Hibernation image not present or could not be loaded.
[ 0.994201] registered taskstats version 1
[ 0.994509] Magic number: 11:219:223
[ 0.994622] rtc_cmos 00:03: setting system clock to 2011-05-28 09:14:08 UTC (1306574048)
[ 0.994626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.994627] EDD information not available.
[ 1.010325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.410118] Refined TSC clocksource calibration: 2009.999 MHz.
[ 1.410124] Switching to clocksource tsc
[ 1.440076] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.440190] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.460297] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
[ 1.460376] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 1.460381] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 1.460384] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.480299] ata3.00: configured for UDMA/133
[ 1.500039] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.500256] ata4.00: configured for UDMA/100
[ 1.640937] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.640950] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.790632] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.790646] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.800058] usb 2-6: new high speed USB device using ehci_hcd and address 2
[ 1.810262] ata1.00: HPA detected: current 1953523055, native 1953525168
[ 1.810267] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.810270] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.830264] ata1.00: configured for UDMA/133
[ 1.830391] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.830540] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.830543] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.830609] sd 0:0:0:0: [sda] Write Protect is off
[ 1.830612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.830642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.830673] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 1.830834] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.830995] sd 2:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.831080] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.831084] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.831119] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.833607] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
[ 1.836881] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.836886] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.837048] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.837118] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.844408] sdb: sdb1 sdb4 < sdb5 sdb6 >
[ 1.844837] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.859595] sda: sda1 < sda5 sda6 sda7 sda8 >
[ 1.860051] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.862202] Freeing unused kernel memory: 956k freed
[ 1.862487] Write protecting the kernel read-only data: 10240k
[ 1.863332] Freeing unused kernel memory: 184k freed
[ 1.868951] Freeing unused kernel memory: 1440k freed
[ 1.892116] udev[73]: starting version 167
[ 1.951851] hub 2-6:1.0: USB hub found
[ 1.952190] hub 2-6:1.0: 4 ports detected
[ 1.963515] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.963556] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.972956] scsi4 : pata_jmicron
[ 1.976112] scsi5 : pata_jmicron
[ 1.976706] ata5: PATA max UDMA/100 cmd 0x8000 ctl 0x8400 bmdma 0x9000 irq 16
[ 1.976710] ata6: PATA max UDMA/100 cmd 0x8800 ctl 0x8c00 bmdma 0x9008 irq 16
[ 1.976888] ahci 0000:03:00.0: version 3.0
[ 1.976904] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.990259] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.990265] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.990273] ahci 0000:03:00.0: setting latency timer to 64
[ 1.992028] scsi6 : ahci
[ 1.993350] scsi7 : ahci
[ 1.993484] ata7: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19
[ 1.993489] ata8: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19
[ 2.021534] sky2: driver version 1.28
[ 2.021575] sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.021588] sky2 0000:04:00.0: setting latency timer to 64
[ 2.021620] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 2.021722] sky2 0000:04:00.0: irq 44 for MSI/MSI-X
[ 2.023892] Floppy drive(s): fd0 is 1.44M
[ 2.034781] sky2 0000:04:00.0: eth0: addr 00:1a:4d:74:be:fc
[ 2.043756] FDC 0 is a post-1991 82077
[ 2.170700] ata5.00: HPA detected: current 312579695, native 312581808
[ 2.170709] ata5.00: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100
[ 2.170714] ata5.00: 312579695 sectors, multi 16: LBA48
[ 2.170958] ata5.01: HPA detected: current 488395055, native 488397168
[ 2.170964] ata5.01: ATA-7: Hitachi HDT725025VLAT80, V5DOA42A, max UDMA/133
[ 2.170969] ata5.01: 488395055 sectors, multi 16: LBA48
[ 2.190746] ata5.00: configured for UDMA/100
[ 2.230340] usb 2-6.1: new low speed USB device using ehci_hcd and address 3
[ 2.230826] ata5.01: configured for UDMA/100
[ 2.230980] scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5
[ 2.231183] sd 4:0:0:0: [sdc] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 2.231229] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.231246] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.231250] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.231276] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.231335] scsi 4:0:1:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 2.231486] sd 4:0:1:0: Attached scsi generic sg4 type 0
[ 2.235221] sd 4:0:1:0: [sdd] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 2.241511] sdc: sdc1 sdc2 sdc3 sdc4
[ 2.241851] sd 4:0:1:0: [sdd] Write Protect is off
[ 2.241855] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.241896] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.241977] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.250954] sdd: sdd1
[ 2.251232] sd 4:0:1:0: [sdd] Attached SCSI disk
[ 2.340145] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.340185] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.374959] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3
[ 2.375105] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 2.410732] input: Wireless Keyboard/Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input4
[ 2.410882] generic-usb 0003:099A:7202.0002: input,hidraw1: USB HID v1.11 Keyboard [Wireless Keyboard/Mouse] on usb-0000:00:1d.7-6.1/input0
[ 2.424142] input: Wireless Keyboard/Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.1/input/input5
[ 2.424371] generic-usb 0003:099A:7202.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Wireless Keyboard/Mouse] on usb-0000:00:1d.7-6.1/input1
[ 2.424559] usbcore: registered new interface driver usbhid
[ 2.424562] usbhid: USB HID core driver
[ 2.430346] usb 2-6.4: new high speed USB device using ehci_hcd and address 4
[ 2.987034] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.438122] Adding 5124728k swap on /dev/sdc2. Priority:-1 extents:1 across:5124728k
[ 8.457747] udev[380]: starting version 167
[ 8.492988] Adding 5044372k swap on /dev/sda7. Priority:-2 extents:1 across:5044372k
[ 8.494834] lp: driver loaded but no devices found
[ 8.647153] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 8.775438] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.798116] gameport gameport0: EMU10K1 is pci0000:05:02.1/gameport0, io 0xb400, speed 975kHz
[ 8.806226] nvidia: module license 'NVIDIA' taints kernel.
[ 8.806231] Disabling lock debugging due to kernel taint
[ 8.812988] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.813037] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.131234] type=1400 audit(1306566856.631:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=636 comm="apparmor_parser"
[ 9.132186] type=1400 audit(1306566856.631:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
[ 9.132783] type=1400 audit(1306566856.631:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
[ 9.134732] type=1400 audit(1306566856.631:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=719 comm="apparmor_parser"
[ 9.135678] type=1400 audit(1306566856.631:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"
[ 9.136276] type=1400 audit(1306566856.631:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"
[ 9.151123] lp0: using parport0 (interrupt-driven).
[ 9.286070] sky2 0000:04:00.0: eth0: enabling interface
[ 9.286833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.290299] Linux video capture interface: v2.00
[ 9.301738] ppdev: user-space parallel port driver
[ 9.370072] IR NEC protocol handler initialized
[ 9.382338] IR RC5(x) protocol handler initialized
[ 9.392104] IR RC6 protocol handler initialized
[ 9.403336] IR JVC protocol handler initialized
[ 9.415079] IR Sony protocol handler initialized
[ 9.482320] lirc_dev: IR Remote Control driver registered, major 250
[ 9.483605] IR LIRC bridge handler initialized
[ 9.582748] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 9.582801] saa7134 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.582808] saa7130[0]: found at 0000:05:01.0, rev: 1, irq: 19, latency: 32, mmio: 0xfa100000
[ 9.582815] saa7130[0]: subsystem: 1461:d109, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 9.582834] saa7130[0]: board init: gpio is 10708
[ 9.735909] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.735920] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.735926] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.804561] type=1400 audit(1306566857.301:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=967 comm="apparmor_parser"
[ 9.807458] type=1400 audit(1306566857.301:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=970 comm="apparmor_parser"
[ 9.811380] type=1400 audit(1306566857.311:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=967 comm="apparmor_parser"
[ 9.812462] type=1400 audit(1306566857.311:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=967 comm="apparmor_parser"
[ 9.825626] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
[ 9.840094] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 9.840834] usbcore: registered new interface driver usblp
[ 9.900239] saa7130[0]: i2c eeprom 00: 61 14 09 d1 ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900251] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900262] saa7130[0]: i2c eeprom 20: 13 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900272] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900282] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900292] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900302] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900312] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900322] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900333] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900343] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900353] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900363] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900373] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900383] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900393] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.900653] saa7130[0]: registered device video0 [v4l2]
[ 9.900750] saa7130[0]: registered device vbi0
[ 9.927946] saa7134 ALSA driver for DMA sound loaded
[ 9.927952] saa7130[0]/alsa: UNKNOWN/GENERIC doesn't support digital audio
[ 9.953090] EMU10K1_Audigy 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.737424] vboxdrv: Found 2 processor cores.
[ 10.738203] vboxdrv: fAsync=0 offMin=0x2da offMax=0x1234
[ 10.738280] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 10.738282] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
[ 11.061279] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 11.061798] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.511947] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 11.514847] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 12.919641] vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90005500000, using 5120k, total 5120k
[ 12.919645] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 12.919648] vesafb: scrolling: redraw
[ 12.919650] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 12.919865] Console: switching to colour frame buffer device 160x64
[ 12.974931] fb0: VESA VGA frame buffer device
[ 14.754041] usb 2-6.4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 21.860110] eth0: no IPv6 routers present
[ 35.732878] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 36.041667] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 121.967625] Intel AES-NI instructions are not detected.
[ 122.054729] padlock_aes: VIA PadLock not detected.
[ 225.135330] usblp0: removed
[ 237.010043] usb 2-6.4: USB disconnect, address 4
[ 238.010308] usb 2-6.4: new high speed USB device using ehci_hcd and address 5
[ 238.143913] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[ 239.463644] usb 2-6.4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 240.595710] usblp0: removed
[ 265.599990] exe (2624): /proc/2624/oom_adj is deprecated, please use /proc/2624/oom_score_adj instead.
[23659.510382] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23659.610658] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23659.725504] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23663.061468] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23663.166618] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23663.277680] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23663.308065] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100
[23663.398592] NVRM: Xid (0000:01:00): 13, 0001 00000000 00005097 000015e0 00000000 00000100