dmesg - AMDAthIIX2@3600MHz165003032011
Linux version 2.6.18-194.32.1.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5 17:52:25 EST 2011
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomsi
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS)
BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fbcd0
ACPI: RSDT (v001 112709 RSDT1514 0x20091127 MSFT 0x00000097) @ 0x00000000cff90000
ACPI: FADT (v001 112709 FACP1514 0x20091127 MSFT 0x00000097) @ 0x00000000cff90200
ACPI: MADT (v001 112709 APIC1514 0x20091127 MSFT 0x00000097) @ 0x00000000cff90390
ACPI: MCFG (v001 112709 OEMMCFG 0x20091127 MSFT 0x00000097) @ 0x00000000cff90410
ACPI: OEMB (v001 112709 OEMB1514 0x20091127 MSFT 0x00000097) @ 0x00000000cffa8040
ACPI: HPET (v001 112709 OEMHPET0 0x20091127 MSFT 0x00000097) @ 0x00000000cff9c3d0
ACPI: INFO (v001 112709 AMDINFO 0x20091127 MSFT 0x00000097) @ 0x00000000cffa80c0
ACPI: NVHD (v001 112709 NVHDCP 0x20091127 MSFT 0x00000097) @ 0x00000000cffa81f0
ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0x00000000cff9c410
ACPI: DSDT (v001 A1154 A1154000 0x00000000 INTL 0x20060113) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 1030027
DMA zone: 2627 pages, LIFO batch:0
DMA32 zone: 833480 pages, LIFO batch:31
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 0:6 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 0:6 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e3000
Nosave address range: 00000000000e3000 - 0000000000100000
Nosave address range: 00000000cff90000 - 00000000cffa8000
Nosave address range: 00000000cffa8000 - 00000000cffe0000
Nosave address range: 00000000cffe0000 - 00000000d0000000
Nosave address range: 00000000d0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fef00000
Nosave address range: 00000000fef00000 - 00000000fff00000
Nosave address range: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists. Total pages: 1030027
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomsi
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 4000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Nosave address range: 0000000004000000 - 0000000008000000
ACPI: DMAR not present
Memory: 4044532k/4980736k available (2575k kernel code, 148872k reserved, 1304k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=3600001)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 15.000 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 7200.21 BogoMIPS (lpj=3600105)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) II X2 250 Processor stepping 02
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 25.000000 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3600.006 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=341
checking if image is initramfs... it is
Freeing initrd memory: 3337k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
PCI: Using configuration type 1 for extended access
ACPI Error (exresop-0175): Null stack entry at ffff81012fdf5658 [20060707]
ACPI Exception (nsinit-0313): AE_AML_INTERNAL, Could not execute arguments for [SM00] (Region) [20060707]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR23._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: DMAR not present
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: 00:04: iomem range 0xfed04000-0xfed04fff has been reserved
pnp: 00:04: iomem range 0xfee01000-0xfeefffff could not be reserved
pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0a: ioport range 0x230-0x23f has been reserved
pnp: 00:0a: ioport range 0x290-0x29f has been reserved
pnp: 00:0a: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0a: ioport range 0xa10-0xa1f has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: d000-dfff
MEM window: f8000000-fbefffff
PREFETCH window 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:03:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: d000-dfff
MEM window: f8000000-fbefffff
PREFETCH window 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:10.0
IO window: d000-dfff
MEM window: f8000000-fbefffff
PREFETCH window 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:14.0
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LN0A] -> GSI 19 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:10.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:03:02.0 to 64
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LN3A] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:13.0 to 64
ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LN4A] -> GSI 17 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:14.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1304352832.462:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 1DF8C62584B4E7F2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:13.0: Enabling HT MSI Mapping
pci 0000:00:14.0: Enabling HT MSI Mapping
Boot video device is 0000:04:00.0
PCI: Setting latency timer of device 0000:00:10.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:14.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:03:02.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 505k
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
GSI 19 sharing vector 0xE1 and IRQ 19
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 225, io mem 0xf7f7fc00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
GSI 20 sharing vector 0xE9 and IRQ 20
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 22 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 233, io mem 0xf7f7f800
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
GSI 21 sharing vector 0x32 and IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 50, io mem 0xf7f7e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
GSI 22 sharing vector 0x3A and IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 58, io mem 0xf7f7d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-4: configuration #1 chosen from 1 choice
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 225
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 66
ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 66
ata3: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76200 irq 66
ata4: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76280 irq 66
ata5: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76300 irq 66
ata6: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76380 irq 66
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: WDC WD1600JS-00M Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD1600JS-00M Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 2:0:0:0: Attached scsi disk sdb
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1304352858.616:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr e0:cb:4e:4f:a2:48
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
EDAC MC: Ver: 2.0.1 Jan 5 2011
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
EDAC amd64_edac: Ver: 3.2.0 Jan 5 2011
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
amd64_edac: probe of 0000:00:18.2 failed with error -22
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:07.0 to 64
nvidia: module license 'NVIDIA' taints kernel.
hda_codec: ALC1200: BIOS auto-probing.
ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LN0A] -> GSI 19 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:04:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.44 Sun Feb 27 22:41:03 PST 2011
usbcore: registered new driver snd-usb-audio
floppy0: no floppy controllers found
lp: driver loaded but no devices found
Vendor: HL-DT-ST Model: DVDRRW GSA-2166D Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 00
scsi 6:0:0:0: Attached scsi generic sg2 type 5
usb-storage: device scan complete
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.10)
Adding 2064376k swap on /dev/VolGroup00/swap. Priority:-1 extents:1 across:2064376k
powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x0 gid 0x0 (3000 MHz)
powernow-k8: 1 : fid 0x0 gid 0x0 (2300 MHz)
powernow-k8: 2 : fid 0x0 gid 0x0 (1800 MHz)
powernow-k8: 3 : fid 0x0 gid 0x0 (800 MHz)
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffff890afc40
vboxdrv: fAsync=0 offMin=0x690 offMax=0x1776
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000).
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
irq 233: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[] __report_bad_irq+0x30/0x7d
[] note_interrupt+0x1e6/0x227
[] __do_IRQ+0xbd/0x103
[] do_IRQ+0xe7/0xf5
[] ret_from_intr+0x0/0xa
[] pci_conf1_write+0x0/0xdb
[] :forcedeth:nv_rx_process_optimized+0xcb/0x3c4
[] :forcedeth:nv_rx_process_optimized+0x57/0x3c4
[] :forcedeth:nv_nic_irq_optimized+0x8f/0x232
[] handle_IRQ_event+0x51/0xa6
[] __do_IRQ+0xa4/0x103
[] __do_softirq+0x89/0x133
[] do_IRQ+0xe7/0xf5
[] default_idle+0x0/0x50
[] ret_from_intr+0x0/0xa
[] default_idle+0x29/0x50
[] cpu_idle+0x95/0xb8
[] start_kernel+0x220/0x225
[] _sinittext+0x22f/0x236
handlers:
[] (usb_hcd_irq+0x0/0x55)
Disabling IRQ #233
beryl[3948] trap stack segment rip:40f840 rsp:7fff1aa27670 error:0
npviewer.bin[12065]: segfault at 0000000000000538 rip 00002aed3d860460 rsp 00007fffcab2cb58 error 6
npviewer.bin[21353]: segfault at 0000000000000538 rip 00002b0ebe59c460 rsp 00007fff3d4294c8 error 6