dmesg - PS5000_DBENCH_256
Linux version 2.6.18-238.9.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Tue Apr 12 18:10:13 EDT 2011
Command line: ro root=/dev/VolGroup00/LogVol00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 0000000000098400 (usable)
BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9
BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000c40000000 (usable)
DMI present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000facd0
ACPI: XSDT (v001 SMCI 0x20101125 MSFT 0x00000097) @ 0x00000000bf790100
ACPI: FADT (v004 112510 FACP1400 0x20101125 MSFT 0x00000097) @ 0x00000000bf790290
ACPI: MADT (v002 112510 APIC1400 0x20101125 MSFT 0x00000097) @ 0x00000000bf790390
ACPI: MCFG (v001 112510 OEMMCFG 0x20101125 MSFT 0x00000097) @ 0x00000000bf7904b0
ACPI: SLIT (v001 112510 OEMSLIT 0x20101125 MSFT 0x00000097) @ 0x00000000bf7904f0
ACPI: OEMB (v001 112510 OEMB1400 0x20101125 MSFT 0x00000097) @ 0x00000000bf79e040
ACPI: SRAT (v002 112510 OEMSRAT 0x00000001 INTL 0x00000001) @ 0x00000000bf79a6a0
ACPI: HPET (v001 112510 OEMHPET 0x20101125 MSFT 0x00000097) @ 0x00000000bf79a870
ACPI: DMAR (v001 AMI OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x00000000bf79e0d0
ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @ 0x00000000bf7a1b30
ACPI: EINJ (v001 AMIER AMI_EINJ 0x20101125 MSFT 0x00000097) @ 0x00000000bf79a8b0
ACPI: BERT (v001 AMIER AMI_BERT 0x20101125 MSFT 0x00000097) @ 0x00000000bf79aa40
ACPI: ERST (v001 AMIER AMI_ERST 0x20101125 MSFT 0x00000097) @ 0x00000000bf79aa70
ACPI: HEST (v001 AMIER ABC_HEST 0x20101125 MSFT 0x00000097) @ 0x00000000bf79ac20
ACPI: DSDT (v002 10600 10600000 0x00000000 INTL 0x20051117) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-c0000000
SRAT: Node 0 PXM 0 0-640000000
SRAT: Node 1 PXM 1 640000000-c40000000
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000640000000
bootmap start 100000 pages 200
Bootmem setup node 1 0000000640000000-0000000c40000000
bootmap start 640006000 pages 192
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-640000
On node 0 totalpages: 6198025
DMA zone: 2385 pages, LIFO batch:0
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 5429760 pages, LIFO batch:31
Setting up node 1 640000-c40000
On node 1 totalpages: 6205440
Normal zone: 6205440 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Processor #18 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Processor #20 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x20] enabled)
Processor #32 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x22] enabled)
Processor #34 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x32] enabled)
Processor #50 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x34] enabled)
Processor #52 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
Processor #3 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
Processor #19 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
Processor #21 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
Processor #33 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x23] enabled)
Processor #35 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x33] enabled)
Processor #51 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x35] enabled)
Processor #53 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 0000000000098000 - 0000000000099000
Nosave address range: 0000000000099000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 00000000bf780000 - 00000000bf78e000
Nosave address range: 00000000bf78e000 - 00000000bf790000
Nosave address range: 00000000bf790000 - 00000000bf79e000
Nosave address range: 00000000bf79e000 - 00000000bf7d0000
Nosave address range: 00000000bf7d0000 - 00000000bf7e0000
Nosave address range: 00000000bf7e0000 - 00000000bf7ec000
Nosave address range: 00000000bf7ec000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffc00000
Nosave address range: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 24 CPUs, 8 hotplug CPUs
Built 2 zonelists. Total pages: 12403465
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x707f000 - 0xb07f000
Memory: 49444888k/51380224k available (2592k kernel code, 877576k reserved, 1653k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.27 BogoMIPS (lpj=2400139)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 8.333 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/16 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.07 BogoMIPS (lpj=2400038)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/16 APIC 0x12
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.14 BogoMIPS (lpj=2400071)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/12 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/16 APIC 0x14
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.21 BogoMIPS (lpj=2400105)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/14 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 4/16 APIC 0x20
Initializing CPU#4
Calibrating delay using timer specific routine.. 4800.33 BogoMIPS (lpj=2400167)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/20 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 5/16 APIC 0x22
Initializing CPU#5
Calibrating delay using timer specific routine.. 4800.38 BogoMIPS (lpj=2400193)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/22 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 6/16 APIC 0x32
Initializing CPU#6
Calibrating delay using timer specific routine.. 4800.12 BogoMIPS (lpj=2400063)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/32 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 7/16 APIC 0x34
Initializing CPU#7
Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=2400057)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/34 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 8/16 APIC 0x1
Initializing CPU#8
Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=2400055)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 9/16 APIC 0x3
Initializing CPU#9
Calibrating delay using timer specific routine.. 4800.09 BogoMIPS (lpj=2400045)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 10/16 APIC 0x13
Initializing CPU#10
Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=2400055)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/13 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU10: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 11/16 APIC 0x15
Initializing CPU#11
Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=2400055)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/15 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU11: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 12/16 APIC 0x21
Initializing CPU#12
Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=2400056)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/21 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU12: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 13/16 APIC 0x23
Initializing CPU#13
Calibrating delay using timer specific routine.. 4800.18 BogoMIPS (lpj=2400092)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/23 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU13: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 14/16 APIC 0x33
Initializing CPU#14
Calibrating delay using timer specific routine.. 4800.24 BogoMIPS (lpj=2400124)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/33 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU14: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 15/16 APIC 0x35
Initializing CPU#15
Calibrating delay using timer specific routine.. 4800.32 BogoMIPS (lpj=2400160)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/35 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU15: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Brought up 16 CPUs
CPU#0: NMI watchdog performance counter calibration - 1180->1200
CPU#1: NMI watchdog performance counter calibration - 65->85
CPU#2: NMI watchdog performance counter calibration - 65->85
CPU#3: NMI watchdog performance counter calibration - 65->85
CPU#4: NMI watchdog performance counter calibration - 63->83
CPU#5: NMI watchdog performance counter calibration - 64->84
CPU#6: NMI watchdog performance counter calibration - 63->83
CPU#7: NMI watchdog performance counter calibration - 63->83
CPU#8: NMI watchdog performance counter calibration - 62->82
CPU#9: NMI watchdog performance counter calibration - 62->82
CPU#10: NMI watchdog performance counter calibration - 62->82
CPU#11: NMI watchdog performance counter calibration - 60->80
CPU#12: NMI watchdog performance counter calibration - 61->81
CPU#13: NMI watchdog performance counter calibration - 61->81
CPU#14: NMI watchdog performance counter calibration - 59->79
CPU#15: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2400.139 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=2,18,1423
checking if image is initramfs... it is
Freeing initrd memory: 3375k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
bus 0 -> pxm 0 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
DMAR:Host address width 40
DMAR:DRHD base: 0x000000fbffe000 flags: 0x1
IOMMU fbffe000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR:RMRR base: 0x000000000ec000 end: 0x000000000effff
DMAR:RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
DMAR:ATSR flags: 0x0
PCI-GART: No AMD northbridge found.
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:06: ioport range 0xa10-0xa1f has been reserved
pnp: 00:09: iomem range 0x400-0x4ff has been reserved
pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fbd00000-fbdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:02.0
IO window: d000-dfff
MEM window: f8f00000-f9bfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:04.0
IO window: e000-efff
MEM window: f9f00000-fabfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: d000-efff
MEM window: f8f00000-fabfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: d000-efff
MEM window: f8f00000-fabfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: faf00000-fb7fffff
PREFETCH window 0x00000000f7000000-0x00000000f7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
PCI: Setting latency timer of device 0000:05:02.0 to 64
PCI: Setting latency timer of device 0000:05:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1303985113.616:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key C2DDC58DBBE93568
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:0b:01.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
PCI: Setting latency timer of device 0000:05:02.0 to 64
PCI: Setting latency timer of device 0000:05:04.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
Monitor-Mwait will be used to enter C-3 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU4 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU5 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU6 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU7 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU8 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU9 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU10 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU11 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU12 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU13 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU14 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU15 (power states: C1[C1] C2[C3] C3[C3])
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 520k
GSI 16 sharing vector 0xE9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 233, io mem 0xfbeda000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
GSI 17 sharing vector 0x32 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 50, io mem 0xfbed8000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
GSI 18 sharing vector 0x3A and IRQ 18
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 58, io base 0x0000bc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 19 sharing vector 0x42 and IRQ 19
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 66, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
GSI 20 sharing vector 0x4A and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 74, io base 0x0000b800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 50, io base 0x0000b480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000b080
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 4-1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input0
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.1-1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 74
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
input: GASIA PS2toUSB Adapter as /class/input/input2
input: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.0-2
input: GASIA PS2toUSB Adapter as /class/input/input3
input: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.0-2
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6100 irq 82
ata2: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6180 irq 82
ata3: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6200 irq 82
ata4: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6280 irq 82
ata5: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6300 irq 82
ata6: SATA max UDMA/133 abar m2048@0xfbed6000 port 0xfbed6380 irq 82
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B05, max UDMA/133
ata1.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: DV-28S-V, 1.0B, max UDMA/100
ata5.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: WDC WD2502ABYS-1 Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Vendor: TEAC Model: DV-28S-V Rev: 1.0B
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1303985140.206:2): selinux=0 auid=4294967295 ses=4294967295
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 233
dca service started, version 1.8
input: PC Speaker as /class/input/input4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
EDAC MC: Ver: 2.0.1 Apr 12 2011
EDAC i7core: Driver loaded.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2-1
Copyright (c) 2007-2009 Intel Corporation.
GSI 21 sharing vector 0x5A and IRQ 21
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 28 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:01:00.0 to 64
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:30:b0:d6
igb 0000:01:00.0: eth0: PBA No: ffffff-0ff
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 22 sharing vector 0x92 and IRQ 22
ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 40 (level, low) -> IRQ 146
PCI: Setting latency timer of device 0000:01:00.1 to 64
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:30:b0:d7
igb 0000:01:00.1: eth1: PBA No: ffffff-0ff
igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 23 sharing vector 0xCA and IRQ 23
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 39 (level, low) -> IRQ 202
PCI: Setting latency timer of device 0000:06:00.0 to 64
igb 0000:06:00.0: 0 vfs allocated
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:63:72:48
igb 0000:06:00.0: eth2: PBA No: e64750-003
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 24 sharing vector 0x43 and IRQ 24
ACPI: PCI Interrupt 0000:06:00.1[B] -> GSI 38 (level, low) -> IRQ 67
PCI: Setting latency timer of device 0000:06:00.1 to 64
igb 0000:06:00.1: 0 vfs allocated
igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:63:72:49
igb 0000:06:00.1: eth3: PBA No: e64750-003
igb 0000:06:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 25 sharing vector 0x7B and IRQ 25
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 30 (level, low) -> IRQ 123
PCI: Setting latency timer of device 0000:08:00.0 to 64
igb 0000:08:00.0: 0 vfs allocated
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:1b:21:63:72:4c
igb 0000:08:00.0: eth4: PBA No: e64750-003
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
GSI 26 sharing vector 0xB3 and IRQ 26
ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 37 (level, low) -> IRQ 179
PCI: Setting latency timer of device 0000:08:00.1 to 64
igb 0000:08:00.1: 0 vfs allocated
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:1b:21:63:72:4d
igb 0000:08:00.1: eth5: PBA No: e64750-003
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 51511288k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:51511288k
IA-32 Microcode Update Driver: v1.14a
Loading iSCSI transport class v2.0-871.
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
igb 0000:01:00.0: changing MTU from 1500 to 9000
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
igb 0000:01:00.1: changing MTU from 1500 to 9000
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
scsi6 : iSCSI Initiator over TCP/IP
scsi7 : iSCSI Initiator over TCP/IP
scsi8 : iSCSI Initiator over TCP/IP
scsi9 : iSCSI Initiator over TCP/IP
scsi10 : iSCSI Initiator over TCP/IP
Vendor: EQLOG Vendor: EQLOGIC Model: 100E-00 Rev: 4.3
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 209725440 512-byte hdwr sectors (107379 MB)
Vendor: EQLsdb: Write Protect is off
Osdb: Mode Sense: ad 00 00 00
GIC Model: 100E-00 Rev: 4.3
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: drive cache: write through
SCSI device sdc: 209725440 512-byte hdwr sectors (107379 MB)
SCSI device sdb: 209725440 512-byte hdwr sectors (107379 MB)
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 00
sdb: Write Protect is off
sdb: Mode Sense: ad 00 00 00
SCSI device sdc: drive cache: write through
SCSI device sdb: drive cache: write through
sdb:SCSI device sdc: 209725440 512-byte hdwr sectors (107379 MB)
sdc: Write Protect is off
sdc: Mode Sense: ad 00 00 00
SCSI device sdc: drive cache: write through
sdc:IC Model: 100E-00 Rev: 4.3
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 209725440 512-byte hdwr sectors (107379 MB)
sdb1
sdd: Write Protect is off
sdd: Mode Sense: ad 00 00 00
sdc1
SCSI device sdd: drive cache: write through
sd 7:0:0:0: Attached scsi disk sdb
sd 6:0:0:0: Attached scsi disk sdc
SCSI device sdd: 209725440 512-byte hdwr sectors (107379 MB)
sd 7:0:0:0: Attached scsi generic sg2 type 0
sdd: Write Protect is off
sdd: Mode Sense: ad 00 00 00
SCSI device sdd: drive cache: write through
sdd: sdd1
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: Attached scsi disk sdd
sd 8:0:0:0: Attached scsi generic sg4 type 0
device-mapper: multipath round-robin: version 1.0.0 loaded
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
fio[2788]: segfault at 0000000000000000 rip 000000000041776a rsp 00007fffd16fe140 error 6
fio[2797]: segfault at 0000000000000000 rip 000000000041776a rsp 00007fffaabbac60 error 6
fio[2804]: segfault at 0000000000000000 rip 000000000041776a rsp 00007fff7963c6a0 error 6