dmesg - shabanitropics
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-7-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-7ubuntu1) ) #39-Ubuntu SMP Fri Mar 25 19:38:02 UTC 2011 (Ubuntu 2.6.38-7.39-generic 2.6.38)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc61000 (usable)
[ 0.000000] BIOS-e820: 00000000bfc61000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd82000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd82000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde2000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde2000 - 00000000bfdf7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdf7000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.06 06/03/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 3 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 36784000 - 373ba000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT bfdf6120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP bfdf5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT bfde5000 0BB21 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS bfd8f000 00040
[ 0.000000] ACPI: HPET bfdf4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC bfdf3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG bfdf2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! bfdf1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC bfde4000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: BOOT bfde3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT bfde2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bfc61
[ 0.000000] 0: 0x000bfcbf -> 0x000bfd82
[ 0.000000] 0: 0x000bfdbf -> 0x000bfde2
[ 0.000000] 0: 0x000bfdf7 -> 0x000bfe00
[ 0.000000] On node 0 totalpages: 785630
[ 0.000000] free_area_init_node: node 0, pgdat c1782100, node_mem_map f4f84200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4365 pages used for memmap
[ 0.000000] HighMem zone: 554053 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f4800000 s28800 r0 d24448 u1048576
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779489
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15718080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe00)
[ 0.000000] Memory: 3079652k/3143680k available (5187k kernel code, 62868k reserved, 2533k data, 700k init, 2233672k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178b000 - 0xc183a000 ( 700 kB)
[ 0.000000] .data : 0xc1510fb1 - 0xc178a480 (2533 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1510fb1 (5187 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3408000 soft=f340a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2095.121 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.24 BogoMIPS (lpj=8380484)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004032] Security Framework initialized
[ 0.004047] AppArmor: AppArmor initialized
[ 0.004049] Yama: becoming mindful.
[ 0.004106] Mount-cache hash table entries: 512
[ 0.004241] Initializing cgroup subsys ns
[ 0.004244] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004248] Initializing cgroup subsys cpuacct
[ 0.004253] Initializing cgroup subsys memory
[ 0.004261] Initializing cgroup subsys devices
[ 0.004263] Initializing cgroup subsys freezer
[ 0.004265] Initializing cgroup subsys net_cls
[ 0.004267] Initializing cgroup subsys blkio
[ 0.004303] CPU: Physical Processor ID: 0
[ 0.004305] CPU: Processor Core ID: 0
[ 0.004308] mce: CPU supports 6 MCE banks
[ 0.004316] CPU0: Thermal monitoring enabled (TM2)
[ 0.004320] using mwait in idle threads.
[ 0.010122] ACPI: Core revision 20110112
[ 0.020013] ftrace: allocating 23638 entries in 47 pages
[ 0.028054] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070765] CPU0: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping 0a
[ 0.072003] APIC calibration not consistent with PM-Timer: 659ms instead of 100ms
[ 0.072003] APIC delta adjusted to PM-Timer: 1247013 (8230193)
[ 0.072003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] CPU 1 irqstacks, hard=f34d2000 soft=f34d4000
[ 0.072003] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.160025] Brought up 2 CPUs
[ 0.160028] Total of 2 processors activated (8380.20 BogoMIPS).
[ 0.160607] devtmpfs: initialized
[ 0.161218] print_constraints: dummy:
[ 0.161245] Time: 15:36:41 Date: 04/04/11
[ 0.161283] NET: Registered protocol family 16
[ 0.161310] Trying to unpack rootfs image as initramfs...
[ 0.161405] EISA bus registered
[ 0.161413] ACPI: bus type pci registered
[ 0.161486] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.161490] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.161492] PCI: Using MMCONFIG for extended config space
[ 0.161493] PCI: Using configuration type 1 for base access
[ 0.176065] bio: create slab at 0
[ 0.178581] ACPI: EC: Look up EC in DSDT
[ 0.181052] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.183078] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.463067] Freeing initrd memory: 12504k freed
[ 1.380609] ACPI: SSDT bfc70c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 1.381190] ACPI: Dynamic OEM Table Load:
[ 1.381194] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 1.381370] ACPI: SSDT bfc6e618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.381926] ACPI: Dynamic OEM Table Load:
[ 1.381929] ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.404409] ACPI: SSDT bfc6fe18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.405008] ACPI: Dynamic OEM Table Load:
[ 1.405012] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.416214] ACPI: SSDT bfc70f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.416787] ACPI: Dynamic OEM Table Load:
[ 1.416790] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.428402] ACPI: Interpreter enabled
[ 1.428402] ACPI: (supports S0 S3 S4 S5)
[ 1.428402] ACPI: Using IOAPIC for interrupt routing
[ 1.439461] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.439671] ACPI: No dock devices found.
[ 1.439673] HEST: Table not found.
[ 1.439678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.440128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.440857] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.440860] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.440863] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.440867] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 1.440882] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 1.440910] DMAR: Forcing write-buffer flush capability
[ 1.440911] DMAR: Disabling IOMMU for graphics on this chipset
[ 1.440937] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[ 1.440977] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.440981] pci 0000:00:01.0: PME# disabled
[ 1.441031] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 1.441094] pci 0000:00:1a.0: reg 20: [io 0x50e0-0x50ff]
[ 1.441155] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 1.441213] pci 0000:00:1a.1: reg 20: [io 0x50c0-0x50df]
[ 1.441280] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 1.441733] pci 0000:00:1a.7: reg 10: [mem 0xd7005c00-0xd7005fff]
[ 1.476122] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.476127] pci 0000:00:1a.7: PME# disabled
[ 1.476154] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 1.476173] pci 0000:00:1b.0: reg 10: [mem 0xd7000000-0xd7003fff 64bit]
[ 1.478166] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.478170] pci 0000:00:1b.0: PME# disabled
[ 1.478193] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 1.478259] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.478263] pci 0000:00:1c.0: PME# disabled
[ 1.478288] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 1.478353] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.478357] pci 0000:00:1c.1: PME# disabled
[ 1.478392] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 1.478454] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 1.478517] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 1.478581] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
[ 1.478644] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 1.478707] pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
[ 1.478770] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[ 1.478833] pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
[ 1.478905] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 1.481722] pci 0000:00:1d.7: reg 10: [mem 0xd7005800-0xd7005bff]
[ 1.512124] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.512129] pci 0000:00:1d.7: PME# disabled
[ 1.512152] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.512218] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 1.512343] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 1.512365] pci 0000:00:1f.2: reg 10: [io 0x5108-0x510f]
[ 1.512375] pci 0000:00:1f.2: reg 14: [io 0x5114-0x5117]
[ 1.512385] pci 0000:00:1f.2: reg 18: [io 0x5100-0x5107]
[ 1.512394] pci 0000:00:1f.2: reg 1c: [io 0x5110-0x5113]
[ 1.512404] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 1.512414] pci 0000:00:1f.2: reg 24: [mem 0xd7005000-0xd70057ff]
[ 1.512454] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.512458] pci 0000:00:1f.2: PME# disabled
[ 1.512477] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 1.512495] pci 0000:00:1f.3: reg 10: [mem 0xd7006000-0xd70060ff 64bit]
[ 1.512521] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 1.512561] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 1.512587] pci 0000:00:1f.6: reg 10: [mem 0xd7004000-0xd7004fff 64bit]
[ 1.512723] pci 0000:01:00.0: [10de:06ef] type 0 class 0x000300
[ 1.512745] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 1.512770] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.512795] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 1.512811] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
[ 1.512826] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.514868] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.514871] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.514875] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 1.514880] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.514946] pci 0000:02:00.0: [168c:001c] type 0 class 0x000200
[ 1.514972] pci 0000:02:00.0: reg 10: [mem 0xd6000000-0xd600ffff 64bit]
[ 1.515095] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.515105] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.515110] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.515114] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd6ffffff]
[ 1.515121] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 1.515187] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 1.515206] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.515238] pci 0000:03:00.0: reg 18: [mem 0xd4010000-0xd4010fff 64bit pref]
[ 1.515259] pci 0000:03:00.0: reg 20: [mem 0xd4000000-0xd400ffff 64bit pref]
[ 1.515273] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 1.515317] pci 0000:03:00.0: supports D1 D2
[ 1.515319] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.515325] pci 0000:03:00.0: PME# disabled
[ 1.520111] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.520115] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.520120] pci 0000:00:1c.1: bridge window [mem 0xd5000000-0xd5ffffff]
[ 1.520127] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 1.520198] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.520203] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.520207] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.520214] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.520217] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.520220] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.520223] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.520225] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 1.520246] pci_bus 0000:00: on NUMA node 0
[ 1.520249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.520543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.520590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 1.520691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.520756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.520914] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.521108] pci0000:00: ACPI _OSC control (0x1c) granted
[ 1.527948] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528014] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528079] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528154] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528219] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528283] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.528347] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.528412] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.528552] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.528556] vgaarb: loaded
[ 1.528785] SCSI subsystem initialized
[ 1.528796] libata version 3.00 loaded.
[ 1.528796] usbcore: registered new interface driver usbfs
[ 1.528796] usbcore: registered new interface driver hub
[ 1.528796] usbcore: registered new device driver usb
[ 1.528796] wmi: Mapper loaded
[ 1.528796] PCI: Using ACPI for IRQ routing
[ 1.528796] PCI: pci_cache_line_size set to 64 bytes
[ 1.528796] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 1.528796] reserve RAM buffer: 00000000bfc61000 - 00000000bfffffff
[ 1.528796] reserve RAM buffer: 00000000bfd82000 - 00000000bfffffff
[ 1.528796] reserve RAM buffer: 00000000bfde2000 - 00000000bfffffff
[ 1.528796] reserve RAM buffer: 00000000bfe00000 - 00000000bfffffff
[ 1.530445] NetLabel: Initializing
[ 1.530447] NetLabel: domain hash size = 128
[ 1.530449] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.530461] NetLabel: unlabeled traffic allowed by default
[ 1.530497] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.530503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.530509] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.536113] Switching to clocksource hpet
[ 1.539950] Switched to NOHz mode on CPU #0
[ 1.540051] Switched to NOHz mode on CPU #1
[ 1.548220] AppArmor: AppArmor Filesystem Enabled
[ 1.548255] pnp: PnP ACPI init
[ 1.548276] ACPI: bus type pnp registered
[ 1.548310] pnp 00:00: [mem 0xf8000000-0xfbffffff]
[ 1.548378] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.548383] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.549044] pnp 00:01: [bus 00-ff]
[ 1.549047] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 1.549050] pnp 00:01: [io 0x0cf8-0x0cff]
[ 1.549052] pnp 00:01: [io 0x0d00-0xffff window]
[ 1.549055] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 1.549058] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 1.549060] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 1.549063] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 1.549065] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 1.549068] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 1.549070] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 1.549073] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 1.549075] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 1.549078] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 1.549080] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 1.549083] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 1.549085] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 1.549088] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[ 1.549090] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 1.549093] pnp 00:01: [mem 0xfed40000-0xfed44fff window]
[ 1.549181] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.549367] pnp 00:02: [io 0x002e-0x002f]
[ 1.549369] pnp 00:02: [io 0x004e-0x004f]
[ 1.549372] pnp 00:02: [io 0x164e-0x164f]
[ 1.549374] pnp 00:02: [io 0x0061]
[ 1.549376] pnp 00:02: [io 0x0070]
[ 1.549378] pnp 00:02: [io 0x0080]
[ 1.549383] pnp 00:02: [io 0x0092]
[ 1.549385] pnp 00:02: [io 0x00b2-0x00b3]
[ 1.549387] pnp 00:02: [io 0x0063]
[ 1.549389] pnp 00:02: [io 0x0065]
[ 1.549391] pnp 00:02: [io 0x0067]
[ 1.549393] pnp 00:02: [io 0x0600-0x060f]
[ 1.549395] pnp 00:02: [io 0x0610]
[ 1.549398] pnp 00:02: [io 0x0800-0x080f]
[ 1.549400] pnp 00:02: [io 0x0810-0x0817]
[ 1.549402] pnp 00:02: [io 0x0820-0x0823]
[ 1.549404] pnp 00:02: [io 0x0400-0x047f]
[ 1.549406] pnp 00:02: [io 0x0500-0x053f]
[ 1.549408] pnp 00:02: [io 0x0380-0x0387]
[ 1.549411] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 1.549413] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 1.549415] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 1.549418] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 1.549420] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 1.549422] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 1.549424] pnp 00:02: [mem 0xfed20000-0xfed3ffff]
[ 1.549427] pnp 00:02: [mem 0xfed40000-0xfed44fff]
[ 1.549429] pnp 00:02: [mem 0xfed45000-0xfed8ffff]
[ 1.549431] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 1.549532] system 00:02: [io 0x164e-0x164f] has been reserved
[ 1.549536] system 00:02: [io 0x0600-0x060f] has been reserved
[ 1.549539] system 00:02: [io 0x0610] has been reserved
[ 1.549542] system 00:02: [io 0x0800-0x080f] has been reserved
[ 1.549544] system 00:02: [io 0x0810-0x0817] has been reserved
[ 1.549547] system 00:02: [io 0x0820-0x0823] has been reserved
[ 1.549550] system 00:02: [io 0x0400-0x047f] has been reserved
[ 1.549553] system 00:02: [io 0x0500-0x053f] has been reserved
[ 1.549556] system 00:02: [io 0x0380-0x0387] has been reserved
[ 1.549559] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.549562] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.549565] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.549568] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.549571] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.549574] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.549577] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.549580] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.549583] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.549586] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.549590] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.549601] pnp 00:03: [io 0x0000-0x001f]
[ 1.549604] pnp 00:03: [io 0x0081-0x0091]
[ 1.549606] pnp 00:03: [io 0x0093-0x009f]
[ 1.549608] pnp 00:03: [io 0x00c0-0x00df]
[ 1.549611] pnp 00:03: [dma 4]
[ 1.549653] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.549678] pnp 00:04: [io 0x0070-0x0077]
[ 1.549721] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.549792] pnp 00:05: [irq 0 disabled]
[ 1.549803] pnp 00:05: [irq 8]
[ 1.549806] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 1.549846] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.549858] pnp 00:06: [io 0x00f0]
[ 1.549864] pnp 00:06: [irq 13]
[ 1.549905] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.549918] pnp 00:07: [mem 0xff800000-0xffffffff]
[ 1.549960] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.549978] pnp 00:08: [io 0x0060]
[ 1.549980] pnp 00:08: [io 0x0064]
[ 1.549985] pnp 00:08: [irq 1]
[ 1.550027] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.550046] pnp 00:09: [irq 12]
[ 1.550092] pnp 00:09: Plug and Play ACPI device, IDs SYN1e08 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.550363] pnp: PnP ACPI: found 10 devices
[ 1.550365] ACPI: ACPI bus type pnp unregistered
[ 1.550369] PnPBIOS: Disabled by ACPI PNP
[ 1.588744] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.588749] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 1.588785] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 1.588788] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.588791] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.588796] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 1.588800] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.588805] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.588808] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.588814] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd6ffffff]
[ 1.588818] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 1.588826] pci 0000:03:00.0: BAR 6: assigned [mem 0xd4020000-0xd402ffff pref]
[ 1.588829] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.588832] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 1.588838] pci 0000:00:1c.1: bridge window [mem 0xd5000000-0xd5ffffff]
[ 1.588843] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 1.588849] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 1.588851] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.588857] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.588861] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.588878] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.588882] pci 0000:00:01.0: setting latency timer to 64
[ 1.588893] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.588897] pci 0000:00:1c.0: setting latency timer to 64
[ 1.588904] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.588908] pci 0000:00:1c.1: setting latency timer to 64
[ 1.588915] pci 0000:00:1e.0: setting latency timer to 64
[ 1.588919] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.588922] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.588924] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.588927] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 1.588930] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.588932] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[ 1.588935] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.588938] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.588940] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd6ffffff]
[ 1.588943] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 1.588946] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.588948] pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd5ffffff]
[ 1.588951] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 1.588954] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.588956] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.588959] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.588961] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
[ 1.588996] NET: Registered protocol family 2
[ 1.589072] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.589330] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.589794] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.589990] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.589992] TCP reno registered
[ 1.589995] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.590003] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.590092] NET: Registered protocol family 1
[ 1.620056] pci 0000:01:00.0: Boot video device
[ 1.620067] PCI: CLS 64 bytes, default 64
[ 1.620090] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 1.620092] Simple Boot Flag at 0x44 set to 0x1
[ 1.620288] cpufreq-nforce2: No nForce2 chipset.
[ 1.620424] audit: initializing netlink socket (disabled)
[ 1.620433] type=2000 audit(1301931401.616:1): initialized
[ 1.630026] highmem bounce pool size: 64 pages
[ 1.630031] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.632037] VFS: Disk quotas dquot_6.5.2
[ 1.632102] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.632817] fuse init (API version 7.16)
[ 1.632922] msgmni has been set to 1676
[ 1.633185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.633213] io scheduler noop registered
[ 1.633216] io scheduler deadline registered
[ 1.633231] io scheduler cfq registered (default)
[ 1.633350] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.633388] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.633465] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.633514] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.633612] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.633661] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.633779] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.633782] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.633786] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.633806] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.633808] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.633813] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.633836] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 1.633838] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.633843] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 1.633863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.633891] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.633958] intel_idle: MWAIT substates: 0x22220
[ 1.633960] intel_idle: does not run on family 6 model 23
[ 1.635121] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.636264] ACPI: AC Adapter [ACAD] (on-line)
[ 1.636379] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.636384] ACPI: Power Button [PWRB]
[ 1.636432] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.637566] ACPI: Lid Switch [LID0]
[ 1.637616] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.637620] ACPI: Sleep Button [SLPB]
[ 1.637683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.637686] ACPI: Power Button [PWRF]
[ 1.638771] ACPI: acpi_idle registered with cpuidle
[ 1.638925] Monitor-Mwait will be used to enter C-1 state
[ 1.638953] Monitor-Mwait will be used to enter C-2 state
[ 1.638978] Monitor-Mwait will be used to enter C-3 state
[ 1.638985] Marking TSC unstable due to TSC halts in idle
[ 1.643039] [Firmware Bug]: Invalid critical threshold (0)
[ 1.643606] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.643609] ACPI: Thermal Zone [TZ01] (39 C)
[ 1.643628] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.643696] ERST: Table is not found!
[ 1.643776] isapnp: Scanning for PnP cards...
[ 1.659445] ACPI: Battery Slot [BAT0] (battery present)
[ 1.997539] isapnp: No Plug & Play device found
[ 2.028413] Linux agpgart interface v0.103
[ 2.029938] brd: module loaded
[ 2.030590] loop: module loaded
[ 2.030677] i2c-core: driver [adp5520] using legacy suspend method
[ 2.030679] i2c-core: driver [adp5520] using legacy resume method
[ 2.031138] Fixed MDIO Bus: probed
[ 2.031178] PPP generic driver version 2.4.2
[ 2.031217] tun: Universal TUN/TAP device driver, 1.6
[ 2.031219] tun: (C) 1999-2004 Max Krasnyansky
[ 2.031309] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.031334] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.031346] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.031350] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.031390] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.031450] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.035318] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 2.035336] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd7005c00
[ 2.048015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.048151] hub 1-0:1.0: USB hub found
[ 2.048155] hub 1-0:1.0: 4 ports detected
[ 2.048239] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.048251] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.048254] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.048294] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.048342] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.052230] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.052245] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd7005800
[ 2.068014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.068146] hub 2-0:1.0: USB hub found
[ 2.068150] hub 2-0:1.0: 8 ports detected
[ 2.068240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.068255] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.068277] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.068284] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.068287] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.068326] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.068376] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
[ 2.068518] hub 3-0:1.0: USB hub found
[ 2.068523] hub 3-0:1.0: 2 ports detected
[ 2.068601] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.068608] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.068612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.068652] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.068702] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[ 2.068833] hub 4-0:1.0: USB hub found
[ 2.068837] hub 4-0:1.0: 2 ports detected
[ 2.068911] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.068918] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.068921] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.068962] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.072044] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0
[ 2.072170] hub 5-0:1.0: USB hub found
[ 2.072174] hub 5-0:1.0: 2 ports detected
[ 2.072247] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.072254] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.072258] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.072301] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.072342] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 2.072473] hub 6-0:1.0: USB hub found
[ 2.072477] hub 6-0:1.0: 2 ports detected
[ 2.072552] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.072559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.072563] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.072603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.072643] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
[ 2.072771] hub 7-0:1.0: USB hub found
[ 2.072775] hub 7-0:1.0: 2 ports detected
[ 2.072853] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.072860] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.072863] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.072901] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.072953] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[ 2.073080] hub 8-0:1.0: USB hub found
[ 2.073084] hub 8-0:1.0: 2 ports detected
[ 2.073235] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 2.090858] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.090864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.090996] mousedev: PS/2 mouse device common for all mice
[ 2.092243] rtc_cmos 00:04: RTC can wake from S4
[ 2.092303] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.092331] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.092413] device-mapper: uevent: version 1.0.3
[ 2.092496] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.092564] device-mapper: multipath: version 1.2.0 loaded
[ 2.092566] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.092642] EISA: Probing bus 0 at eisa.0
[ 2.092644] EISA: Cannot allocate resource for mainboard
[ 2.092646] Cannot allocate resource for EISA slot 1
[ 2.092648] Cannot allocate resource for EISA slot 2
[ 2.092650] Cannot allocate resource for EISA slot 3
[ 2.092652] Cannot allocate resource for EISA slot 4
[ 2.092654] Cannot allocate resource for EISA slot 5
[ 2.092656] Cannot allocate resource for EISA slot 6
[ 2.092658] Cannot allocate resource for EISA slot 7
[ 2.092660] Cannot allocate resource for EISA slot 8
[ 2.092661] EISA: Detected 0 cards.
[ 2.092775] cpuidle: using governor ladder
[ 2.092879] cpuidle: using governor menu
[ 2.093173] TCP cubic registered
[ 2.093314] NET: Registered protocol family 10
[ 2.093932] NET: Registered protocol family 17
[ 2.093947] Registering the dns_resolver key type
[ 2.094298] Using IPI No-Shortcut mode
[ 2.094392] PM: Hibernation image not present or could not be loaded.
[ 2.094404] registered taskstats version 1
[ 2.094746] Magic number: 7:458:638
[ 2.094834] rtc_cmos 00:04: setting system clock to 2011-04-04 15:36:44 UTC (1301931404)
[ 2.094837] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.094838] EDD information not available.
[ 2.094972] Freeing unused kernel memory: 700k freed
[ 2.095259] Write protecting the kernel text: 5188k
[ 2.095315] Write protecting the kernel read-only data: 2148k
[ 2.107491] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.121321] udev[69]: starting version 167
[ 2.257651] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.257678] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.257719] r8169 0000:03:00.0: setting latency timer to 64
[ 2.257785] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.258334] r8169 0000:03:00.0: eth0: RTL8102e at 0xf8042000, 00:23:8b:cb:06:49, XID 04c00000 IRQ 43
[ 2.259813] ahci 0000:00:1f.2: version 3.0
[ 2.259823] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.259865] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 2.259920] ahci: SSS flag set, parallel bus scan disabled
[ 2.259954] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.259958] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 2.259963] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.284859] scsi0 : ahci
[ 2.284979] scsi1 : ahci
[ 2.285057] scsi2 : ahci
[ 2.285134] scsi3 : ahci
[ 2.285212] scsi4 : ahci
[ 2.285290] scsi5 : ahci
[ 2.285486] ata1: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005100 irq 44
[ 2.285489] ata2: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005180 irq 44
[ 2.285492] ata3: DUMMY
[ 2.285493] ata4: DUMMY
[ 2.285496] ata5: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005300 irq 44
[ 2.285500] ata6: SATA max UDMA/133 abar m2048@0xd7005000 port 0xd7005380 irq 44
[ 2.416068] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 2.780049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.783931] ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_03, max UDMA/100
[ 2.783937] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.787898] ata1.00: configured for UDMA/100
[ 2.788077] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320JI 2SS0 PQ: 0 ANSI: 5
[ 2.788262] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.788289] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.788348] sd 0:0:0:0: [sda] Write Protect is off
[ 2.788351] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.788375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.863709] sda: sda1 sda2 sda3 sda4
[ 2.864145] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.904041] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 3.320094] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 3.684103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.703365] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 3.721204] ata2.00: configured for UDMA/100
[ 3.726170] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633M 0200 PQ: 0 ANSI: 5
[ 3.734700] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.734705] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.734906] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.735009] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.052125] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.372126] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.393380] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
[ 4.393508] generic-usb 0003:046D:C052.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
[ 4.393532] usbcore: registered new interface driver usbhid
[ 4.393534] usbhid: USB HID core driver
[ 4.882736] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.112370] Adding 2929660k swap on /dev/sda3. Priority:-1 extents:1 across:2929660k
[ 8.314150] udev[330]: starting version 167
[ 9.485762] lp: driver loaded but no devices found
[ 9.783486] Bluetooth: Core ver 2.15
[ 9.783513] NET: Registered protocol family 31
[ 9.783514] Bluetooth: HCI device and connection manager initialized
[ 9.783517] Bluetooth: HCI socket layer initialized
[ 10.001958] cfg80211: Calling CRDA to update world regulatory domain
[ 10.002365] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 10.047660] Linux video capture interface: v2.00
[ 10.081838] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0180)
[ 10.084884] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[ 10.084954] usbcore: registered new interface driver uvcvideo
[ 10.084956] USB Video Class driver (v1.0.0)
[ 10.246716] acpi device:08: registered as cooling_device2
[ 10.246879] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8
[ 10.246971] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.438378] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.439656] usbcore: registered new interface driver btusb
[ 10.642569] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 10.711476] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 10.847374] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.847386] ath5k 0000:02:00.0: setting latency timer to 64
[ 10.847435] ath5k 0000:02:00.0: registered as 'phy0'
[ 11.351459] ath: EEPROM regdomain: 0x67
[ 11.351462] ath: EEPROM indicates we should expect a direct regpair map
[ 11.351465] ath: Country alpha2 being used: 00
[ 11.351467] ath: Regpair used: 0x67
[ 11.351471] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351473] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351476] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351478] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351481] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351483] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351486] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351488] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351490] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351493] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351495] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351498] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351500] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351505] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351508] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351510] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351512] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351515] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351517] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351519] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351522] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351524] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351527] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351529] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 11.351532] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 11.351534] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 11.351591] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 11.488740] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 11.488747] cfg80211: World regulatory domain updated:
[ 11.488749] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.488752] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.488755] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.488758] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.488760] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.488763] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.936896] nvidia: module license 'NVIDIA' taints kernel.
[ 11.936901] Disabling lock debugging due to kernel taint
[ 12.000018] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.000702] Registered led device: ath5k-phy0::rx
[ 12.000726] Registered led device: ath5k-phy0::tx
[ 12.000735] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.043717] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.043775] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 12.043804] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.137779] type=1400 audit(1301920614.539:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=531 comm="apparmor_parser"
[ 12.138674] type=1400 audit(1301920614.539:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser"
[ 12.139241] type=1400 audit(1301920614.539:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser"
[ 12.140105] type=1400 audit(1301920614.543:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=530 comm="apparmor_parser"
[ 12.140996] type=1400 audit(1301920614.543:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser"
[ 12.141570] type=1400 audit(1301920614.543:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[ 12.142409] type=1400 audit(1301920614.543:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=696 comm="apparmor_parser"
[ 12.143313] type=1400 audit(1301920614.543:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser"
[ 12.143889] type=1400 audit(1301920614.543:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser"
[ 13.070757] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 13.070764] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 13.070775] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.070785] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.070791] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.070931] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.30 Fri Feb 25 14:34:41 PST 2011
[ 13.248406] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.248584] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.529869] vesafb: framebuffer at 0xd1000000, mapped to 0xf8a80000, using 1216k, total 1216k
[ 14.529873] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 14.529875] vesafb: scrolling: redraw
[ 14.529877] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 14.530017] Console: switching to colour frame buffer device 80x30
[ 14.530031] fb0: VESA VGA frame buffer device
[ 16.838690] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.108202] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.159902] type=1400 audit(1301920620.559:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=827 comm="apparmor_parser"
[ 18.160910] type=1400 audit(1301920620.563:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser"
[ 18.161480] type=1400 audit(1301920620.563:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser"
[ 18.225284] type=1400 audit(1301920620.627:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=826 comm="apparmor_parser"
[ 18.260579] type=1400 audit(1301920620.663:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=830 comm="apparmor_parser"
[ 18.261644] type=1400 audit(1301920620.663:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=830 comm="apparmor_parser"
[ 18.362680] type=1400 audit(1301920620.763:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=828 comm="apparmor_parser"
[ 18.373952] type=1400 audit(1301920620.775:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=831 comm="apparmor_parser"
[ 18.374608] type=1400 audit(1301920620.775:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=828 comm="apparmor_parser"
[ 18.381773] type=1400 audit(1301920620.783:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=828 comm="apparmor_parser"
[ 18.643742] ppdev: user-space parallel port driver
[ 21.657087] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.661506] r8169 0000:03:00.0: eth0: link down
[ 21.661687] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.050213] Bluetooth: L2CAP ver 2.15
[ 23.050217] Bluetooth: L2CAP socket layer initialized
[ 23.163575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.163578] Bluetooth: BNEP filters: protocol multicast
[ 23.226532] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.226535] Bluetooth: SCO socket layer initialized
[ 23.404484] Bluetooth: RFCOMM TTY layer initialized
[ 23.404490] Bluetooth: RFCOMM socket layer initialized
[ 23.404492] Bluetooth: RFCOMM ver 1.11
[ 25.077045] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 25.334776] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 33.437328] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.440461] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 59.319407] wlan0: authenticate with 00:14:7c:ab:06:40 (try 1)
[ 59.320930] wlan0: authenticated
[ 59.320957] wlan0: associate with 00:14:7c:ab:06:40 (try 1)
[ 59.325197] wlan0: RX AssocResp from 00:14:7c:ab:06:40 (capab=0x421 status=0 aid=12)
[ 59.325201] wlan0: associated
[ 59.325914] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.325985] cfg80211: Calling CRDA for country: JO
[ 59.330381] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330385] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330388] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330391] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330393] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330396] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330398] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330401] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330403] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330406] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330408] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330411] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330416] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330418] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330421] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330423] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330428] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330430] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330433] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330435] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330438] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330440] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330443] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 59.330445] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 59.330447] cfg80211: Disabling freq 2484 MHz
[ 59.330452] cfg80211: Regulatory domain changed to country: JO
[ 59.330454] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 59.330456] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 59.330459] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 69.488032] wlan0: no IPv6 routers present
[ 969.093395] exe (2315): /proc/2315/oom_adj is deprecated, please use /proc/2315/oom_score_adj instead.
[ 1000.136193] CE: hpet increased min_delta_ns to 20113 nsec
[ 1003.903981] CE: hpet increased min_delta_ns to 30169 nsec
[ 1074.387648] wlan0: deauthenticating from 00:14:7c:ab:06:40 by local choice (reason=3)
[ 1074.400154] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1074.400161] cfg80211: Restoring regulatory settings
[ 1074.400172] cfg80211: Calling CRDA to update world regulatory domain
[ 1074.407158] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1074.407167] cfg80211: World regulatory domain updated:
[ 1074.407170] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1074.407176] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1074.407181] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1074.407185] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1074.407190] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1074.407194] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1081.883980] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 1081.885375] wlan0: authenticated
[ 1081.885398] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 1081.889597] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=3)
[ 1081.889662] wlan0: associated
[ 1081.890364] cfg80211: Calling CRDA for country: JO
[ 1081.894789] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894794] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894797] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894799] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894802] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894805] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894807] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894810] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894812] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894815] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894817] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894820] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894822] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894825] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894827] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894829] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894832] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894835] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894837] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894840] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894842] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894845] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894847] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894850] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894852] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1081.894855] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1081.894857] cfg80211: Disabling freq 2484 MHz
[ 1081.894862] cfg80211: Regulatory domain changed to country: JO
[ 1081.894864] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1081.894866] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1081.894869] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 1082.459601] Intel AES-NI instructions are not detected.
[ 1082.486725] padlock_aes: VIA PadLock not detected.
[ 1093.362486] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 1094.774176] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 1294.728062] usb 4-2: USB disconnect, address 2
[ 1713.617262] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1713.617269] cfg80211: Restoring regulatory settings
[ 1713.617274] cfg80211: Calling CRDA to update world regulatory domain
[ 1713.623182] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1713.623190] cfg80211: World regulatory domain updated:
[ 1713.623192] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1713.623196] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1713.623200] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1713.623203] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1713.623207] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1713.623210] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1714.715259] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 1714.716653] wlan0: authenticated
[ 1714.716678] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 1714.719432] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=3)
[ 1714.719437] wlan0: associated
[ 1714.720903] cfg80211: Calling CRDA for country: JO
[ 1714.729313] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729320] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729325] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729330] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729334] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729339] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729343] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729347] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729351] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729356] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729360] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729365] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729369] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729374] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729378] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729382] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729386] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729391] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729395] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729400] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729404] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729409] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729412] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729417] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729421] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1714.729426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 1714.729429] cfg80211: Disabling freq 2484 MHz
[ 1714.729437] cfg80211: Regulatory domain changed to country: JO
[ 1714.729440] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1714.729445] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1714.729449] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 2143.572059] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 2143.766121] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12
[ 2143.766365] generic-usb 0003:046D:C052.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
[ 2193.640180] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2193.640187] cfg80211: Restoring regulatory settings
[ 2193.640192] cfg80211: Calling CRDA to update world regulatory domain
[ 2193.645132] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2193.645142] cfg80211: World regulatory domain updated:
[ 2193.645144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2193.645147] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2193.645150] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2193.645153] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2193.645155] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2193.645158] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2194.738651] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 2194.740035] wlan0: authenticated
[ 2194.740092] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 2194.742470] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 2194.742474] wlan0: associated
[ 2194.743404] cfg80211: Calling CRDA for country: JO
[ 2194.748722] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748726] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748728] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748731] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748734] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748736] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748739] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748741] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748744] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748746] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748749] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748751] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748754] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748756] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748758] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748761] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748764] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748766] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748768] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748771] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748773] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748776] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748778] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748781] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748783] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2194.748786] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2194.748788] cfg80211: Disabling freq 2484 MHz
[ 2194.748792] cfg80211: Regulatory domain changed to country: JO
[ 2194.748794] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2194.748797] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2194.748799] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 2673.628413] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2673.628422] cfg80211: Restoring regulatory settings
[ 2673.628428] cfg80211: Calling CRDA to update world regulatory domain
[ 2673.636363] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2673.636369] cfg80211: World regulatory domain updated:
[ 2673.636371] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2673.636374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2673.636377] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2673.636379] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2673.636382] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2673.636385] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2674.731362] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 2674.733333] wlan0: authenticated
[ 2674.733355] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 2674.735778] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 2674.735784] wlan0: associated
[ 2674.736985] cfg80211: Calling CRDA for country: JO
[ 2674.741953] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741957] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741960] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741963] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741965] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741968] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741970] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741973] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741975] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741978] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741980] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741983] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741985] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741988] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741990] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741993] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.741995] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.741998] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.742000] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.742003] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.742005] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.742008] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.742010] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.742013] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.742015] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2674.742018] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 2674.742020] cfg80211: Disabling freq 2484 MHz
[ 2674.742024] cfg80211: Regulatory domain changed to country: JO
[ 2674.742026] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2674.742029] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2674.742031] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 3153.624313] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3153.624322] cfg80211: Restoring regulatory settings
[ 3153.624328] cfg80211: Calling CRDA to update world regulatory domain
[ 3153.632389] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3153.632400] cfg80211: World regulatory domain updated:
[ 3153.632403] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3153.632409] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3153.632414] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3153.632418] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3153.632423] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3153.632428] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3154.722617] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 3154.724317] wlan0: authenticated
[ 3154.724352] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 3154.726744] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 3154.726749] wlan0: associated
[ 3154.728605] cfg80211: Calling CRDA for country: JO
[ 3154.737017] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737024] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737029] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737034] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737038] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737042] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737046] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737051] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737055] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737060] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737064] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737068] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737072] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737077] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737081] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737086] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737090] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737095] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737099] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737103] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737107] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737112] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737116] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737121] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737125] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3154.737130] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3154.737134] cfg80211: Disabling freq 2484 MHz
[ 3154.737141] cfg80211: Regulatory domain changed to country: JO
[ 3154.737144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3154.737148] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3154.737153] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 3273.620185] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3273.620194] cfg80211: Restoring regulatory settings
[ 3273.620200] cfg80211: Calling CRDA to update world regulatory domain
[ 3273.628155] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3273.628164] cfg80211: World regulatory domain updated:
[ 3273.628167] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3273.628173] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3273.628178] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3273.628182] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3273.628187] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3273.628191] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3274.718545] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 3274.720758] wlan0: authenticated
[ 3274.720784] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 3274.723379] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 3274.723382] wlan0: associated
[ 3274.724197] cfg80211: Calling CRDA for country: JO
[ 3274.728701] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728708] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728712] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728717] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728721] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728726] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728730] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728735] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728738] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728743] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728747] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728752] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728756] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728760] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728764] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728769] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728773] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728778] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728782] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728787] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728791] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728796] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728800] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728805] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728809] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3274.728814] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3274.728818] cfg80211: Disabling freq 2484 MHz
[ 3274.728825] cfg80211: Regulatory domain changed to country: JO
[ 3274.728828] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3274.728833] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3274.728837] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 3753.620633] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3753.620642] cfg80211: Restoring regulatory settings
[ 3753.620649] cfg80211: Calling CRDA to update world regulatory domain
[ 3753.628438] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3753.628448] cfg80211: World regulatory domain updated:
[ 3753.628451] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3753.628457] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3753.628462] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3753.628467] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3753.628471] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3753.628476] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3754.720179] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 3754.721568] wlan0: authenticated
[ 3754.721637] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 3754.724136] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 3754.724143] wlan0: associated
[ 3754.725218] cfg80211: Calling CRDA for country: JO
[ 3754.733031] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733035] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733038] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733041] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733043] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733046] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733048] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733051] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733053] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733056] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733058] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733061] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733064] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733066] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733069] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733071] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733074] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733076] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733079] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733082] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733084] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733087] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733089] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733092] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733094] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3754.733097] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3754.733099] cfg80211: Disabling freq 2484 MHz
[ 3754.733104] cfg80211: Regulatory domain changed to country: JO
[ 3754.733105] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3754.733108] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3754.733111] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 3993.612329] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3993.612337] cfg80211: Restoring regulatory settings
[ 3993.612343] cfg80211: Calling CRDA to update world regulatory domain
[ 3993.619402] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3993.619411] cfg80211: World regulatory domain updated:
[ 3993.619415] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3993.619420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3993.619425] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3993.619430] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3993.619434] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3993.619439] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3994.711501] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 3994.714438] wlan0: authenticated
[ 3994.714501] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 3994.716919] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 3994.716924] wlan0: associated
[ 3994.717981] cfg80211: Calling CRDA for country: JO
[ 3994.726087] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726094] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726099] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726104] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726108] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726113] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726116] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726121] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726125] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726130] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726134] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726139] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726143] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726148] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726152] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726157] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726161] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726166] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726170] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726174] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726178] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726183] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726187] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726192] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726196] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 3994.726201] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 3994.726204] cfg80211: Disabling freq 2484 MHz
[ 3994.726211] cfg80211: Regulatory domain changed to country: JO
[ 3994.726214] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3994.726219] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3994.726223] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 4113.612696] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4113.612704] cfg80211: Restoring regulatory settings
[ 4113.612711] cfg80211: Calling CRDA to update world regulatory domain
[ 4113.619918] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4113.619927] cfg80211: World regulatory domain updated:
[ 4113.619931] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4113.619936] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4113.619941] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4113.619945] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4113.619950] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4113.619955] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4114.711224] wlan0: authenticate with 06:24:d2:ac:a7:c8 (try 1)
[ 4114.712639] wlan0: authenticated
[ 4114.712676] wlan0: associate with 06:24:d2:ac:a7:c8 (try 1)
[ 4114.715052] wlan0: RX AssocResp from 06:24:d2:ac:a7:c8 (capab=0x431 status=0 aid=1)
[ 4114.715057] wlan0: associated
[ 4114.716313] cfg80211: Calling CRDA for country: JO
[ 4114.724254] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724261] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724266] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724271] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724275] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724280] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724284] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724289] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724293] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724298] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724302] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724306] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724310] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724315] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724319] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724324] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724328] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724333] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724337] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724342] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724346] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724351] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724355] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724360] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724364] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4114.724368] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4114.724372] cfg80211: Disabling freq 2484 MHz
[ 4114.724379] cfg80211: Regulatory domain changed to country: JO
[ 4114.724382] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4114.724387] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4114.724391] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[ 4214.488320] wlan0: deauthenticating from 06:24:d2:ac:a7:c8 by local choice (reason=3)
[ 4214.533137] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4214.533145] cfg80211: Restoring regulatory settings
[ 4214.533152] cfg80211: Calling CRDA to update world regulatory domain
[ 4214.545191] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4214.545197] cfg80211: World regulatory domain updated:
[ 4214.545199] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4214.545202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4214.545205] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4214.545207] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4214.545210] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4214.545213] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4215.570986] wlan0: authenticate with 00:14:7c:ab:06:40 (try 1)
[ 4215.572742] wlan0: authenticated
[ 4215.572764] wlan0: associate with 00:14:7c:ab:06:40 (try 1)
[ 4215.577833] wlan0: RX AssocResp from 00:14:7c:ab:06:40 (capab=0x421 status=0 aid=4)
[ 4215.577837] wlan0: associated
[ 4215.578680] cfg80211: Calling CRDA for country: JO
[ 4215.583086] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583091] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583094] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583096] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583099] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583101] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583104] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583106] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583109] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583112] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583114] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583117] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583119] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583122] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583124] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583127] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583129] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583132] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583134] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583137] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583140] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583142] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583145] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583147] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583150] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4215.583152] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 4215.583155] cfg80211: Disabling freq 2484 MHz
[ 4215.583160] cfg80211: Regulatory domain changed to country: JO
[ 4215.583161] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4215.583164] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4215.583167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1800 mBm)