dmesg - timed-code-2-march
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-27-generic (buildd@crested) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 (Ubuntu 2.6.35-27.48-generic 2.6.35.11)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ 16000-19000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 18000-1a000
[ 0.000000] RAMDISK: 3756f000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fba90 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 082410 XSDT1900 20100824 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 082410 FACP1900 20100824 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cfe90450 0F279 (v01 A1608 A1608000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 082410 APIC1900 20100824 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 082410 OEMMCFG 20100824 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 082410 OEMB1900 20100824 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cfe9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfe9f9b0 00038 (v01 082410 OEMHPET 20100824 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] SRAT: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000)
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880100200000-ffff8801073fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096671
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [19000 - 197ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065311
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff]
[ 0.000000] Subtract (59 early reservations)
[ 0.000000] #1 [0001000000 - 0001d18114] TEXT DATA BSS
[ 0.000000] #2 [003756f000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d19000 - 0001d192fd] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009f000 - 00000f06e0] BIOS reserved
[ 0.000000] #7 [00000f08dc - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000f06e0 - 00000f08dc] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #12 [0000018000 - 0000019000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [0001d19300 - 0001d1a300] BOOTMEM
[ 0.000000] #15 [0001d18140 - 0001d18740] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0107400000] MEMMAP 0
[ 0.000000] #19 [0001d18740 - 0001d188c0] BOOTMEM
[ 0.000000] #20 [0001d1a300 - 0001d32300] BOOTMEM
[ 0.000000] #21 [0001d32300 - 0001d4a300] BOOTMEM
[ 0.000000] #22 [0001d4b000 - 0001d4c000] BOOTMEM
[ 0.000000] #23 [0001d188c0 - 0001d18901] BOOTMEM
[ 0.000000] #24 [0001d18940 - 0001d18983] BOOTMEM
[ 0.000000] #25 [0001d189c0 - 0001d18bf0] BOOTMEM
[ 0.000000] #26 [0001d18c00 - 0001d18c68] BOOTMEM
[ 0.000000] #27 [0001d18c80 - 0001d18ce8] BOOTMEM
[ 0.000000] #28 [0001d18d00 - 0001d18d68] BOOTMEM
[ 0.000000] #29 [0001d18d80 - 0001d18de8] BOOTMEM
[ 0.000000] #30 [0001d18e00 - 0001d18e68] BOOTMEM
[ 0.000000] #31 [0001d18e80 - 0001d18ee8] BOOTMEM
[ 0.000000] #32 [0001d18f00 - 0001d18f68] BOOTMEM
[ 0.000000] #33 [0001d18f80 - 0001d18fe8] BOOTMEM
[ 0.000000] #34 [0001d4a300 - 0001d4a368] BOOTMEM
[ 0.000000] #35 [0001d4a380 - 0001d4a3a0] BOOTMEM
[ 0.000000] #36 [0001d4a3c0 - 0001d4a3e0] BOOTMEM
[ 0.000000] #37 [0001d4a400 - 0001d4a46a] BOOTMEM
[ 0.000000] #38 [0001d4a480 - 0001d4a4ea] BOOTMEM
[ 0.000000] #39 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM
[ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM
[ 0.000000] #42 [0001ec0000 - 0001ede000] BOOTMEM
[ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM
[ 0.000000] #44 [0001f40000 - 0001f5e000] BOOTMEM
[ 0.000000] #45 [0001d4a500 - 0001d4a508] BOOTMEM
[ 0.000000] #46 [0001d4a540 - 0001d4a548] BOOTMEM
[ 0.000000] #47 [0001d4a580 - 0001d4a598] BOOTMEM
[ 0.000000] #48 [0001d4a5c0 - 0001d4a5f0] BOOTMEM
[ 0.000000] #49 [0001d4a600 - 0001d4a720] BOOTMEM
[ 0.000000] #50 [0001d4a740 - 0001d4a788] BOOTMEM
[ 0.000000] #51 [0001d4a7c0 - 0001d4a808] BOOTMEM
[ 0.000000] #52 [0001d4c000 - 0001d54000] BOOTMEM
[ 0.000000] #53 [0020000000 - 0024000000] BOOTMEM
[ 0.000000] #54 [0001d4a840 - 0001d4a860] BOOTMEM
[ 0.000000] #55 [0001f5e000 - 0005f5e000] BOOTMEM
[ 0.000000] #56 [0001d54000 - 0001d74000] BOOTMEM
[ 0.000000] #57 [0001d74000 - 0001db4000] BOOTMEM
[ 0.000000] #58 [000001a800 - 0000022800] BOOTMEM
[ 0.000000] Memory: 8113268k/9175040k available (5716k kernel code, 788356k absent, 273416k reserved, 5375k data, 912k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:728
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3712.508 MHz processor.
[ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6622.30 BogoMIPS (lpj=33111520)
[ 0.010008] pid_max: default: 32768 minimum: 301
[ 0.010021] Security Framework initialized
[ 0.010031] AppArmor: AppArmor initialized
[ 0.010032] Yama: becoming mindful.
[ 0.010502] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021013] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021760] Mount-cache hash table entries: 256
[ 0.021831] Initializing cgroup subsys ns
[ 0.021833] Initializing cgroup subsys cpuacct
[ 0.021835] Initializing cgroup subsys memory
[ 0.021840] Initializing cgroup subsys devices
[ 0.021842] Initializing cgroup subsys freezer
[ 0.021843] Initializing cgroup subsys net_cls
[ 0.021857] tseg: 0000000000
[ 0.021866] CPU: Physical Processor ID: 0
[ 0.021867] CPU: Processor Core ID: 0
[ 0.021868] mce: CPU supports 6 MCE banks
[ 0.021874] using C1E aware idle routine
[ 0.021875] Performance Events: AMD PMU driver.
[ 0.021878] ... version: 0
[ 0.021879] ... bit width: 48
[ 0.021880] ... generic registers: 4
[ 0.021881] ... value mask: 0000ffffffffffff
[ 0.021882] ... max period: 00007fffffffffff
[ 0.021883] ... fixed-purpose events: 0
[ 0.021884] ... event mask: 000000000000000f
[ 0.022840] ACPI: Core revision 20100428
[ 0.040004] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040008] ftrace: allocating 22687 entries in 89 pages
[ 0.043856] Setting APIC routing to flat
[ 0.044087] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.147369] CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00
[ 0.150000] Booting Node 0, Processors #1
[ 0.310014] System has AMD C1E enabled
[ 0.310021] Switch to broadcast mode on CPU1
[ 0.310034] #2
[ 0.480015] Switch to broadcast mode on CPU2
[ 0.480043] #3
[ 0.650026] Switch to broadcast mode on CPU3
[ 0.650058] #4
[ 0.820026] Switch to broadcast mode on CPU4
[ 0.820060] #5 Ok.
[ 0.990031] Brought up 6 CPUs
[ 0.990036] Total of 6 processors activated (39732.92 BogoMIPS).
[ 0.990027] Switch to broadcast mode on CPU5
[ 0.992592] Switch to broadcast mode on CPU0
[ 0.992592] devtmpfs: initialized
[ 0.992592] regulator: core version 0.5
[ 0.992592] Time: 12:49:07 Date: 03/02/11
[ 0.992592] NET: Registered protocol family 16
[ 0.992592] node 0 link 0: io port [1000, ffffff]
[ 0.992592] TOM: 00000000d0000000 aka 3328M
[ 0.992592] Fam 10h mmconf [e0000000, efffffff]
[ 0.992592] node 0 link 0: mmio [a0000, bffff]
[ 0.992592] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.992592] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.992592] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.992592] TOM2: 0000000230000000 aka 8960M
[ 0.992592] bus: [00, 07] on node 0 link 0
[ 0.992592] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.992592] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.992592] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.992592] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.992592] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.992592] ACPI: bus type pci registered
[ 0.992592] Trying to unpack rootfs image as initramfs...
[ 0.992592] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.992592] PCI: not using MMCONFIG
[ 0.992592] PCI: Using configuration type 1 for base access
[ 0.992592] PCI: Using configuration type 1 for extended access
[ 0.992592] bio: create slab at 0
[ 0.992592] ACPI: EC: Look up EC in DSDT
[ 0.992592] ACPI: Executed 3 blocks of module-level executable AML code
[ 1.135525] Freeing initrd memory: 10756k freed
[ 1.262369] ACPI: Interpreter enabled
[ 1.262372] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.262385] ACPI: Using IOAPIC for interrupt routing
[ 1.262423] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.264089] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.283964] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 1.284058] ACPI Warning: Incorrect checksum in table [OEMB] - 0xCB, should be 0xCA (20100428/tbutils-314)
[ 1.284176] ACPI: No dock devices found.
[ 1.284178] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.284374] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.284551] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.284553] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.284554] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.284555] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.284557] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 1.284558] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 1.284638] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.284640] pci 0000:00:02.0: PME# disabled
[ 1.284667] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.284669] pci 0000:00:09.0: PME# disabled
[ 1.284691] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.284693] pci 0000:00:0a.0: PME# disabled
[ 1.284721] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 1.284725] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 1.284729] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 1.284733] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 1.284736] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 1.284740] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
[ 1.284751] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.284784] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
[ 1.284824] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
[ 1.284856] pci 0000:00:12.2: supports D1 D2
[ 1.284857] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.284859] pci 0000:00:12.2: PME# disabled
[ 1.284877] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
[ 1.284918] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
[ 1.284949] pci 0000:00:13.2: supports D1 D2
[ 1.284950] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.284952] pci 0000:00:13.2: PME# disabled
[ 1.284999] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 1.285003] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 1.285007] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 1.285011] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 1.285015] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 1.285043] pci 0000:00:14.2: reg 10: [mem 0xfe5f8000-0xfe5fbfff 64bit]
[ 1.285068] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.285071] pci 0000:00:14.2: PME# disabled
[ 1.285132] pci 0000:00:14.5: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
[ 1.285191] pci 0000:00:15.0: supports D1 D2
[ 1.285214] pci 0000:00:16.0: reg 10: [mem 0xfe5f7000-0xfe5f7fff]
[ 1.285254] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
[ 1.285284] pci 0000:00:16.2: supports D1 D2
[ 1.285285] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 1.285288] pci 0000:00:16.2: PME# disabled
[ 1.285399] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.285405] pci 0000:01:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit]
[ 1.285408] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 1.285414] pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref]
[ 1.285427] pci 0000:01:00.0: supports D1 D2
[ 1.285447] pci 0000:01:00.1: reg 10: [mem 0xfe6ec000-0xfe6effff 64bit]
[ 1.285471] pci 0000:01:00.1: supports D1 D2
[ 1.300017] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.300021] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 1.300024] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.300026] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.300065] pci 0000:02:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit]
[ 1.300102] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.300105] pci 0000:02:00.0: PME# disabled
[ 1.320019] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.320022] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.320024] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.320027] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.320092] pci 0000:03:00.0: reg 24: [mem 0xfe8fe000-0xfe8fffff]
[ 1.320118] pci 0000:03:00.0: PME# supported from D3hot
[ 1.320121] pci 0000:03:00.0: PME# disabled
[ 1.320151] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.320156] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
[ 1.320161] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
[ 1.320167] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.320172] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.320210] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.320218] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.320221] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.320222] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.320225] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.320261] pci 0000:04:06.0: reg 10: [mem 0xfdeff000-0xfdefffff pref]
[ 1.320333] pci 0000:04:06.1: reg 10: [mem 0xfdefe000-0xfdefefff pref]
[ 1.320412] pci 0000:04:07.0: reg 10: [mem 0xfe9fb800-0xfe9fbfff]
[ 1.320418] pci 0000:04:07.0: reg 14: [io 0xdc00-0xdc7f]
[ 1.320457] pci 0000:04:07.0: supports D2
[ 1.320458] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
[ 1.320461] pci 0000:04:07.0: PME# disabled
[ 1.320491] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.320494] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.320496] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.320498] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 1.320500] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.320501] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.320502] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.320503] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.320505] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 1.320506] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 1.320556] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 1.320571] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 1.320582] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 1.320616] pci 0000:05:00.0: supports D1 D2
[ 1.320617] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.320620] pci 0000:05:00.0: PME# disabled
[ 1.340021] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.340025] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 1.340028] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.340032] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.340047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.340187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.340231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 1.340265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.340318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 1.340378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 1.343516] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 1.343632] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 1.343729] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 1.343827] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
[ 1.343943] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 1.344037] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 1.344101] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 1.344166] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 1.344190] HEST: Table is not found!
[ 1.344231] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.344233] vgaarb: loaded
[ 1.344297] SCSI subsystem initialized
[ 1.344314] libata version 3.00 loaded.
[ 1.344314] usbcore: registered new interface driver usbfs
[ 1.344314] usbcore: registered new interface driver hub
[ 1.344314] usbcore: registered new device driver usb
[ 1.344314] ACPI: WMI: Mapper loaded
[ 1.344314] PCI: Using ACPI for IRQ routing
[ 1.344314] PCI: pci_cache_line_size set to 64 bytes
[ 1.344314] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.344314] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 1.344314] NetLabel: Initializing
[ 1.344314] NetLabel: domain hash size = 128
[ 1.344314] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.344314] NetLabel: unlabeled traffic allowed by default
[ 1.344314] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.344314] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.344314] Switching to clocksource tsc
[ 1.344314] AppArmor: AppArmor Filesystem Enabled
[ 1.344314] pnp: PnP ACPI init
[ 1.344314] ACPI: bus type pnp registered
[ 1.346386] pnp: PnP ACPI: found 13 devices
[ 1.346387] ACPI: ACPI bus type pnp unregistered
[ 1.346394] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.346396] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.346400] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.346401] system 00:09: [io 0x040b] has been reserved
[ 1.346403] system 00:09: [io 0x04d6] has been reserved
[ 1.346404] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 1.346405] system 00:09: [io 0x0c14] has been reserved
[ 1.346406] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 1.346408] system 00:09: [io 0x0c52] has been reserved
[ 1.346409] system 00:09: [io 0x0c6c] has been reserved
[ 1.346410] system 00:09: [io 0x0c6f] has been reserved
[ 1.346411] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 1.346412] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 1.346414] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 1.346415] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 1.346416] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 1.346417] system 00:09: [io 0x0800-0x089f] has been reserved
[ 1.346419] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 1.346420] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 1.346421] system 00:09: [io 0x0900-0x090f] has been reserved
[ 1.346422] system 00:09: [io 0x0910-0x091f] has been reserved
[ 1.346424] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 1.346425] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
[ 1.346427] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.346428] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.346429] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.346432] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 1.346433] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 1.346434] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 1.346436] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 1.346438] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.346440] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.346441] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.346443] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.346444] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
[ 1.346446] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.351987] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.351989] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff]
[ 1.351991] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.351993] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.351995] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.351996] pci 0000:00:09.0: bridge window [io disabled]
[ 1.351998] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 1.351999] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.352001] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.352002] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.352004] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 1.352006] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 1.352008] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.352010] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 1.352013] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.352015] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 1.352019] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.352020] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 1.352023] pci 0000:00:15.0: bridge window [mem disabled]
[ 1.352025] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.352032] alloc irq_desc for 18 on node 0
[ 1.352033] alloc kstat_irqs on node 0
[ 1.352036] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.352039] pci 0000:00:02.0: setting latency timer to 64
[ 1.352042] alloc irq_desc for 17 on node 0
[ 1.352043] alloc kstat_irqs on node 0
[ 1.352045] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.352047] pci 0000:00:09.0: setting latency timer to 64
[ 1.352050] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.352051] pci 0000:00:0a.0: setting latency timer to 64
[ 1.352058] alloc irq_desc for 16 on node 0
[ 1.352059] alloc kstat_irqs on node 0
[ 1.352061] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.352063] pci 0000:00:15.0: setting latency timer to 64
[ 1.352065] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.352066] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.352067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.352068] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.352069] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.352070] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.352072] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 1.352073] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 1.352074] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.352075] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 1.352076] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.352077] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 1.352079] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.352080] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 1.352081] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 1.352082] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.352083] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.352084] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.352085] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.352086] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.352087] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.352089] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.352090] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.352108] NET: Registered protocol family 2
[ 1.352234] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.353059] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.354587] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.354770] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.354771] TCP reno registered
[ 1.354781] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.354816] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.354898] NET: Registered protocol family 1
[ 2.210182] pci 0000:01:00.0: Boot video device
[ 2.210210] PCI: CLS 64 bytes, default 64
[ 2.211064] PCI-DMA: Disabling AGP.
[ 2.211163] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 2.211164] PCI-DMA: using GART IOMMU.
[ 2.211166] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.213783] Scanning for low memory corruption every 60 seconds
[ 2.213856] audit: initializing netlink socket (disabled)
[ 2.213867] type=2000 audit(1299070148.210:1): initialized
[ 2.221897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.222827] VFS: Disk quotas dquot_6.5.2
[ 2.222857] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.223254] fuse init (API version 7.14)
[ 2.223294] msgmni has been set to 15996
[ 2.224950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.224951] io scheduler noop registered
[ 2.224952] io scheduler deadline registered
[ 2.224971] io scheduler cfq registered (default)
[ 2.225075] pcieport 0000:00:02.0: setting latency timer to 64
[ 2.225090] alloc irq_desc for 40 on node 0
[ 2.225091] alloc kstat_irqs on node 0
[ 2.225096] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 2.225203] pcieport 0000:00:09.0: setting latency timer to 64
[ 2.225215] alloc irq_desc for 41 on node 0
[ 2.225216] alloc kstat_irqs on node 0
[ 2.225219] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 2.225279] pcieport 0000:00:0a.0: setting latency timer to 64
[ 2.225291] alloc irq_desc for 42 on node 0
[ 2.225292] alloc kstat_irqs on node 0
[ 2.225295] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 2.225371] pcieport 0000:00:15.0: setting latency timer to 64
[ 2.225394] alloc irq_desc for 43 on node 0
[ 2.225395] alloc kstat_irqs on node 0
[ 2.225400] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 2.225459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.225470] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.225559] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.225562] ACPI: Power Button [PWRB]
[ 2.225584] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.225585] ACPI: Power Button [PWRF]
[ 2.225802] ACPI: acpi_idle registered with cpuidle
[ 2.228785] ERST: Table is not found!
[ 2.228916] Linux agpgart interface v0.103
[ 2.229014] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.229216] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.230158] brd: module loaded
[ 2.230370] loop: module loaded
[ 2.230595] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.230611] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 2.230684] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.230688] alloc irq_desc for 19 on node 0
[ 2.230689] alloc kstat_irqs on node 0
[ 2.230692] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.230704] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 2.230710] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 2.230913] Fixed MDIO Bus: probed
[ 2.230930] PPP generic driver version 2.4.2
[ 2.230955] tun: Universal TUN/TAP device driver, 1.6
[ 2.230955] tun: (C) 1999-2004 Max Krasnyansky
[ 2.230998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.231092] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.231115] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.231144] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.231165] ehci_hcd 0000:00:12.2: debug port 1
[ 2.231180] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
[ 2.250122] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.250189] hub 1-0:1.0: USB hub found
[ 2.250192] hub 1-0:1.0: 5 ports detected
[ 2.250346] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.250355] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.250372] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.250389] ehci_hcd 0000:00:13.2: debug port 1
[ 2.250398] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400
[ 2.270122] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.270179] hub 2-0:1.0: USB hub found
[ 2.270181] hub 2-0:1.0: 5 ports detected
[ 2.270327] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.270336] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.270356] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.270375] ehci_hcd 0000:00:16.2: debug port 1
[ 2.270383] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000
[ 2.290123] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.290180] hub 3-0:1.0: USB hub found
[ 2.290183] hub 3-0:1.0: 4 ports detected
[ 2.290283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.290340] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.290350] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.290368] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.290384] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
[ 2.351982] hub 4-0:1.0: USB hub found
[ 2.351986] hub 4-0:1.0: 5 ports detected
[ 2.352338] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.352347] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.352365] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.352375] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
[ 2.411963] hub 5-0:1.0: USB hub found
[ 2.411970] hub 5-0:1.0: 5 ports detected
[ 2.412320] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.412329] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.412346] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.412357] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fc000
[ 2.471967] hub 6-0:1.0: USB hub found
[ 2.471971] hub 6-0:1.0: 2 ports detected
[ 2.472317] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.472326] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.472344] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.472355] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5f7000
[ 2.531963] hub 7-0:1.0: USB hub found
[ 2.531967] hub 7-0:1.0: 4 ports detected
[ 2.532259] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.532308] PNP: No PS/2 controller found. Probing ports directly.
[ 2.532752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.532756] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.532817] mice: PS/2 mouse device common for all mice
[ 2.532861] rtc_cmos 00:03: RTC can wake from S4
[ 2.532878] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.532893] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.532940] device-mapper: uevent: version 1.0.3
[ 2.533045] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 2.533190] device-mapper: multipath: version 1.1.1 loaded
[ 2.533191] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.533489] cpuidle: using governor ladder
[ 2.533580] cpuidle: using governor menu
[ 2.533721] TCP cubic registered
[ 2.533790] NET: Registered protocol family 10
[ 2.533971] lo: Disabled Privacy Extensions
[ 2.534066] NET: Registered protocol family 17
[ 2.534222] powernow-k8: Found 1 AMD Phenom(tm) II X6 1100T Processor (6 cpu cores) (version 2.20.00)
[ 2.534232] powernow-k8: Core Performance Boosting: on.
[ 2.534254] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 2.534255] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 2.534256] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 2.534257] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.534870] PM: Resume from disk failed.
[ 2.534876] registered taskstats version 1
[ 2.535160] Magic number: 3:190:834
[ 2.535249] rtc_cmos 00:03: setting system clock to 2011-03-02 12:49:09 UTC (1299070149)
[ 2.535251] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.535252] EDD information not available.
[ 2.535286] Freeing unused kernel memory: 912k freed
[ 2.535434] Write protecting the kernel read-only data: 10240k
[ 2.535568] Freeing unused kernel memory: 408k freed
[ 2.535771] Freeing unused kernel memory: 1644k freed
[ 2.548598] udev[169]: starting version 163
[ 2.572727] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.572749] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.573531] ahci 0000:00:11.0: version 3.0
[ 2.573531] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.573566] alloc irq_desc for 44 on node 0
[ 2.573567] alloc kstat_irqs on node 0
[ 2.573575] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 2.573631] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.573634] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.573830] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.573874] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.573903] r8169 0000:05:00.0: setting latency timer to 64
[ 2.573907] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.573936] alloc irq_desc for 45 on node 0
[ 2.573937] alloc kstat_irqs on node 0
[ 2.573945] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 2.574240] scsi0 : pata_jmicron
[ 2.574566] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900117c6000, 20:cf:30:5a:d4:72, XID 0c200000 IRQ 45
[ 2.575286] scsi2 : pata_jmicron
[ 2.575581] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 2.575583] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.576746] scsi1 : ahci
[ 2.576955] alloc irq_desc for 22 on node 0
[ 2.576955] alloc kstat_irqs on node 0
[ 2.576955] firewire_ohci 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.576955] scsi3 : ahci
[ 2.577466] scsi4 : ahci
[ 2.577506] scsi5 : ahci
[ 2.577599] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 44
[ 2.577601] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 44
[ 2.577603] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 44
[ 2.577605] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 44
[ 2.578748] scsi6 : pata_atiixp
[ 2.578748] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.578748] ahci 0000:03:00.0: JMB361 has only one port
[ 2.578748] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 2.579254] scsi7 : pata_atiixp
[ 2.580431] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.580433] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.591099] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.591102] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.591105] ahci 0000:03:00.0: setting latency timer to 64
[ 2.591337] scsi8 : ahci
[ 2.591392] scsi9 : ahci
[ 2.591441] ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 18
[ 2.591442] ata10: DUMMY
[ 2.691795] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 2.730125] firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 2.845617] hub 1-4:1.0: USB hub found
[ 2.845726] hub 1-4:1.0: 4 ports detected
[ 2.920984] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.921002] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.940154] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.120137] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.148930] ata6.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 3.148932] ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.190925] ata6.00: configured for UDMA/133
[ 3.210169] firewire_core: created device fw0: GUID 001e8c0000de5005, S400
[ 3.230127] usb 4-3: new full speed USB device using ohci_hcd and address 2
[ 3.480122] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.481449] ata5.00: ATAPI: PLEXTOR DVDR PX-712A, 1.09, max UDMA/33
[ 3.481455] ata5.00: applying bridge limits
[ 3.482890] ata5.00: configured for UDMA/33
[ 3.500714] scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-712A 1.09 PQ: 0 ANSI: 5
[ 3.502465] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.502467] Uniform CD-ROM driver Revision: 3.20
[ 3.502537] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.502569] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 3.502782] scsi 5:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 3.503010] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 3.503018] sd 5:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.503121] sd 5:0:0:0: [sda] Write Protect is off
[ 3.503123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.503175] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.503568] sda: sda1 sda2 sda3 sda4
[ 3.551545] sd 5:0:0:0: [sda] Attached SCSI disk
[ 3.553963] usbcore: registered new interface driver hiddev
[ 3.553987] usbcore: registered new interface driver usbhid
[ 3.553988] usbhid: USB HID core driver
[ 3.770053] usb 4-5: new low speed USB device using ohci_hcd and address 3
[ 4.016258] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 4.016298] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.0-5/input0
[ 4.041192] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3
[ 4.041226] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.0-5/input1
[ 4.096193] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.444237] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 4.646482] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4
[ 4.646525] generic-usb 0003:046D:C01E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
[ 4.728287] usb 1-4.4: new high speed USB device using ehci_hcd and address 5
[ 13.015189] udev[489]: starting version 163
[ 13.021598] lp: driver loaded but no devices found
[ 13.033045] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.033049] Disabling lock debugging due to kernel taint
[ 13.044093] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.044130] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 13.044132] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 13.044887] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 13.044993] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe7fe000
[ 13.047982] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 13.056428] xHCI xhci_add_endpoint called for root hub
[ 13.056428] xHCI xhci_check_bandwidth called for root hub
[ 13.056428] hub 8-0:1.0: USB hub found
[ 13.056428] hub 8-0:1.0: 4 ports detected
[ 13.060899] input: Wacom Intuos3 6x8 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input5
[ 13.067633] ATK0110 ATK0110:00: EC enabled
[ 13.070961] EDAC MC: Ver: 2.1.0 Feb 22 2011
[ 13.072650] usbcore: registered new interface driver wacom
[ 13.072650] wacom: v1.52:USB Wacom tablet driver
[ 13.082572] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [mem 0x00000b00-0x00000b2f 64bit pref window]
[ 13.082574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.082277] Adding 8388604k swap on /dev/sda3. Priority:-1 extents:1 across:8388604k
[ 13.084286] IR NEC protocol handler initialized
[ 13.085734] Linux video capture interface: v2.00
[ 13.095184] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 13.095373] EDAC amd64_edac: Ver: 3.3.0 Feb 22 2011
[ 13.098111] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 13.098117] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 13.098117] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 13.098118] (Note that use of the override may cause unknown side effects.)
[ 13.098156] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 13.101376] bttv: driver version 0.9.18 loaded
[ 13.101376] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 13.105224] [fglrx] Maximum main memory to use for locked dma buffers: 7767 MBytes.
[ 13.105224] [fglrx] vendor: 1002 device: 9460 count: 1
[ 13.105948] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 13.105948] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.105948] pci 0000:01:00.0: setting latency timer to 64
[ 13.105948] [fglrx] Kernel PAT support is enabled
[ 13.105948] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors
[ 13.106735] bttv: Bt8xx card found (0).
[ 13.106735] alloc irq_desc for 21 on node 0
[ 13.106735] alloc kstat_irqs on node 0
[ 13.106735] bttv 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.106735] bttv0: Bt878 (rev 17) at 0000:04:06.0, irq: 21, latency: 64, mmio: 0xfdeff000
[ 13.106735] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
[ 13.106735] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
[ 13.106735] bttv0: gpio: en=00000000, out=00000000 in=00e47ff3 [init]
[ 13.108715] IR RC5(x) protocol handler initialized
[ 13.111345] IR RC6 protocol handler initialized
[ 13.113278] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input6
[ 13.113305] usbcore: registered new interface driver uvcvideo
[ 13.113305] USB Video Class driver (v0.1.0)
[ 13.121289] IR JVC protocol handler initialized
[ 13.123198] IR Sony protocol handler initialized
[ 13.125974] lirc_dev: IR Remote Control driver registered, major 248
[ 13.126717] IR LIRC bridge handler initialized
[ 13.127816] type=1400 audit(1299070160.082:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=790 comm="apparmor_parser"
[ 13.127893] type=1400 audit(1299070160.082:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=803 comm="apparmor_parser"
[ 13.127974] type=1400 audit(1299070160.082:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=790 comm="apparmor_parser"
[ 13.128055] type=1400 audit(1299070160.082:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=803 comm="apparmor_parser"
[ 13.128064] type=1400 audit(1299070160.082:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=790 comm="apparmor_parser"
[ 13.128148] type=1400 audit(1299070160.082:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=803 comm="apparmor_parser"
[ 13.143156] bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
[ 13.143159] bttv0: tuner type=5
[ 13.153699] bttv0: audio absent, no audio device found!
[ 13.161553] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 13.163325] tuner-simple 0-0061: creating new instance
[ 13.163327] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 13.163998] bttv0: registered device video1
[ 13.164010] bttv0: registered device vbi0
[ 13.164024] bttv0: registered device radio0
[ 13.164062] bttv0: PLL: 28636363 => 35468950 .
[ 13.177454] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.190069] .
[ 13.202906] usbcore: registered new interface driver snd-usb-audio
[ 13.210080] ok
[ 13.250091] Registered IR keymap rc-avermedia
[ 13.250149] input: bttv IR (card=41) as /devices/pci0000:00/0000:00:14.4/0000:04:06.0/rc/rc0/input7
[ 13.250181] rc0: bttv IR (card=41) as /devices/pci0000:00/0000:00:14.4/0000:04:06.0/rc/rc0
[ 13.250299] Bt87x 0000:04:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 13.250398] bt87x0: Using board 5, analog, digital (rate 48000 Hz)
[ 13.295841] hda_codec: ALC892: BIOS auto-probing.
[ 13.302068] Too many connections
[ 13.303621] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 13.303670] alloc irq_desc for 46 on node 0
[ 13.303671] alloc kstat_irqs on node 0
[ 13.303678] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 13.303694] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 13.438211] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.623983] r8169 0000:05:00.0: eth0: link up
[ 13.624131] r8169 0000:05:00.0: eth0: link up
[ 13.662488] type=1400 audit(1299070160.622:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1123 comm="apparmor_parser"
[ 13.662785] type=1400 audit(1299070160.622:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1128 comm="apparmor_parser"
[ 13.662769] type=1400 audit(1299070160.622:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1124 comm="apparmor_parser"
[ 13.662931] type=1400 audit(1299070160.622:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1124 comm="apparmor_parser"
[ 14.204637] ppdev: user-space parallel port driver
[ 14.448483] alloc irq_desc for 47 on node 0
[ 14.448485] alloc kstat_irqs on node 0
[ 14.448492] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[ 14.449948] [fglrx] Firegl kernel thread PID: 1352
[ 14.450168] [fglrx] IRQ 47 Enabled
[ 15.230908] device eth0 entered promiscuous mode
[ 15.810121] device eth0 left promiscuous mode
[ 16.522975] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 16.892270] [fglrx] Gart USWC size:1280 M.
[ 16.892272] [fglrx] Gart cacheable size:508 M.
[ 16.892276] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 16.892277] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 16.892278] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[ 20.016220] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.751697] eth0: no IPv6 routers present
[ 24.263631] hda-intel: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj.
[ 42.075506] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 456.860530] usb 1-4: USB disconnect, address 3
[ 456.860537] usb 1-4.4: USB disconnect, address 5
[ 457.260942] usb 1-4: new high speed USB device using ehci_hcd and address 6
[ 457.412385] hub 1-4:1.0: USB hub found
[ 457.412455] hub 1-4:1.0: 4 ports detected
[ 457.694065] usb 1-4.4: new high speed USB device using ehci_hcd and address 7
[ 457.950769] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 457.965892] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input8
[ 802.089951] usb 1-4: USB disconnect, address 6
[ 802.089958] usb 1-4.4: USB disconnect, address 7
[ 802.480211] usb 1-4: new high speed USB device using ehci_hcd and address 8
[ 802.631686] hub 1-4:1.0: USB hub found
[ 802.631752] hub 1-4:1.0: 4 ports detected
[ 802.911891] usb 1-4.4: new high speed USB device using ehci_hcd and address 9
[ 803.180446] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 803.196333] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input9
[ 837.690662] usb 1-4: USB disconnect, address 8
[ 837.690669] usb 1-4.4: USB disconnect, address 9
[ 838.130165] usb 1-4: new high speed USB device using ehci_hcd and address 10
[ 838.281735] hub 1-4:1.0: USB hub found
[ 838.281801] hub 1-4:1.0: 4 ports detected
[ 838.561151] usb 1-4.4: new high speed USB device using ehci_hcd and address 11
[ 838.800183] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 838.815053] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input10
[ 910.998897] usb 1-4: USB disconnect, address 10
[ 910.998904] usb 1-4.4: USB disconnect, address 11
[ 911.470118] usb 1-4: new high speed USB device using ehci_hcd and address 12
[ 911.621826] hub 1-4:1.0: USB hub found
[ 911.621892] hub 1-4:1.0: 4 ports detected
[ 911.901876] usb 1-4.4: new high speed USB device using ehci_hcd and address 13
[ 912.161395] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 912.175479] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input11
[ 1110.398246] usb 1-4: USB disconnect, address 12
[ 1110.398253] usb 1-4.4: USB disconnect, address 13
[ 1110.840185] usb 1-4: new high speed USB device using ehci_hcd and address 14
[ 1110.991746] hub 1-4:1.0: USB hub found
[ 1110.991812] hub 1-4:1.0: 4 ports detected
[ 1111.281934] usb 1-4.4: new high speed USB device using ehci_hcd and address 15
[ 1111.540577] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1111.555822] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input12
[ 1179.059239] usb 1-4: USB disconnect, address 14
[ 1179.059241] usb 1-4.4: USB disconnect, address 15
[ 1179.470172] usb 1-4: new high speed USB device using ehci_hcd and address 16
[ 1179.622439] hub 1-4:1.0: USB hub found
[ 1179.622504] hub 1-4:1.0: 4 ports detected
[ 1179.901255] usb 1-4.4: new high speed USB device using ehci_hcd and address 17
[ 1180.162037] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1180.176865] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input13
[ 1182.519186] usb 1-4: USB disconnect, address 16
[ 1182.519193] usb 1-4.4: USB disconnect, address 17
[ 1182.531777] cannot submit datapipe for urb 0, error -19: no device
[ 1182.951879] usb 1-4: new high speed USB device using ehci_hcd and address 18
[ 1183.102577] hub 1-4:1.0: USB hub found
[ 1183.102643] hub 1-4:1.0: 4 ports detected
[ 1183.381920] usb 1-4.4: new high speed USB device using ehci_hcd and address 19
[ 1183.639159] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1183.654032] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input14
[ 1217.633669] usb 1-4: USB disconnect, address 18
[ 1217.633676] usb 1-4.4: USB disconnect, address 19
[ 1218.070136] usb 1-4: new high speed USB device using ehci_hcd and address 20
[ 1218.231656] hub 1-4:1.0: USB hub found
[ 1218.231722] hub 1-4:1.0: 4 ports detected
[ 1218.501004] usb 1-4.4: new high speed USB device using ehci_hcd and address 21
[ 1218.741759] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1218.756238] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input15
[ 1244.436574] usb 1-4: USB disconnect, address 20
[ 1244.436581] usb 1-4.4: USB disconnect, address 21
[ 1244.910169] usb 1-4: new high speed USB device using ehci_hcd and address 22
[ 1245.061637] hub 1-4:1.0: USB hub found
[ 1245.061773] hub 1-4:1.0: 4 ports detected
[ 1245.361534] usb 1-4.4: new high speed USB device using ehci_hcd and address 23
[ 1245.610783] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1245.625516] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input16
[ 1306.777870] usb 1-4: USB disconnect, address 22
[ 1306.777877] usb 1-4.4: USB disconnect, address 23
[ 1307.230951] usb 1-4: new high speed USB device using ehci_hcd and address 24
[ 1307.372739] hub 1-4:1.0: USB hub found
[ 1307.372808] hub 1-4:1.0: 4 ports detected
[ 1307.651165] usb 1-4.4: new high speed USB device using ehci_hcd and address 25
[ 1307.891054] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1307.906322] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input17
[ 1521.888793] usb 1-4: USB disconnect, address 24
[ 1521.888800] usb 1-4.4: USB disconnect, address 25
[ 1522.340134] usb 1-4: new high speed USB device using ehci_hcd and address 26
[ 1522.482539] hub 1-4:1.0: USB hub found
[ 1522.482604] hub 1-4:1.0: 4 ports detected
[ 1522.761087] usb 1-4.4: new high speed USB device using ehci_hcd and address 27
[ 1523.001511] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1523.016745] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input18
[ 1906.672288] usb 1-4: USB disconnect, address 26
[ 1906.672295] usb 1-4.4: USB disconnect, address 27
[ 1907.080072] usb 1-4: new high speed USB device using ehci_hcd and address 28
[ 1907.243152] hub 1-4:1.0: USB hub found
[ 1907.243220] hub 1-4:1.0: 4 ports detected
[ 1907.520634] usb 1-4.4: new high speed USB device using ehci_hcd and address 29
[ 1907.760623] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 1907.775469] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input19
[ 2695.907393] usb 1-4: USB disconnect, address 28
[ 2695.907395] usb 1-4.4: USB disconnect, address 29
[ 2696.350961] usb 1-4: new high speed USB device using ehci_hcd and address 30
[ 2696.512192] hub 1-4:1.0: USB hub found
[ 2696.512353] hub 1-4:1.0: 4 ports detected
[ 2696.603393] usb 1-4: USB disconnect, address 30
[ 2696.920960] usb 1-4: new high speed USB device using ehci_hcd and address 31
[ 2697.071520] hub 1-4:1.0: USB hub found
[ 2697.071629] hub 1-4:1.0: 4 ports detected
[ 2697.351708] usb 1-4.4: new high speed USB device using ehci_hcd and address 32
[ 2697.590607] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 2697.604889] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input20
[ 2801.826998] usb 1-4: USB disconnect, address 31
[ 2801.827001] usb 1-4.4: USB disconnect, address 32
[ 2802.300868] usb 1-4: new high speed USB device using ehci_hcd and address 33
[ 2802.451480] hub 1-4:1.0: USB hub found
[ 2802.451579] hub 1-4:1.0: 4 ports detected
[ 2802.741826] usb 1-4.4: new high speed USB device using ehci_hcd and address 34
[ 2802.980272] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 2802.994714] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input21
[ 2816.358457] usb 1-4: USB disconnect, address 33
[ 2816.358460] usb 1-4.4: USB disconnect, address 34
[ 2816.790130] usb 1-4: new high speed USB device using ehci_hcd and address 35
[ 2816.941318] hub 1-4:1.0: USB hub found
[ 2816.941420] hub 1-4:1.0: 4 ports detected
[ 2817.230254] usb 1-4.4: new high speed USB device using ehci_hcd and address 36
[ 2817.480259] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 2817.494914] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input22
[ 2921.290088] usb 1-4: USB disconnect, address 35
[ 2921.290090] usb 1-4.4: USB disconnect, address 36
[ 2921.651784] usb 1-4: new high speed USB device using ehci_hcd and address 37
[ 2921.802238] hub 1-4:1.0: USB hub found
[ 2921.802338] hub 1-4:1.0: 4 ports detected
[ 2922.081746] usb 1-4.4: new high speed USB device using ehci_hcd and address 38
[ 2922.340648] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 2922.354948] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input23
[ 2994.919023] usb 1-4: USB disconnect, address 37
[ 2994.919025] usb 1-4.4: USB disconnect, address 38
[ 2995.350930] usb 1-4: new high speed USB device using ehci_hcd and address 39
[ 2995.513075] hub 1-4:1.0: USB hub found
[ 2995.513233] hub 1-4:1.0: 4 ports detected
[ 2995.791819] usb 1-4.4: new high speed USB device using ehci_hcd and address 40
[ 2996.050708] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 2996.065237] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input24
[ 3231.589315] usb 1-4: USB disconnect, address 39
[ 3231.589318] usb 1-4.4: USB disconnect, address 40
[ 3232.000134] usb 1-4: new high speed USB device using ehci_hcd and address 41
[ 3232.152174] hub 1-4:1.0: USB hub found
[ 3232.152282] hub 1-4:1.0: 4 ports detected
[ 3232.431117] usb 1-4.4: new high speed USB device using ehci_hcd and address 42
[ 3232.680150] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3232.694282] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input25
[ 3654.707456] usb 1-4: USB disconnect, address 41
[ 3654.707458] usb 1-4.4: USB disconnect, address 42
[ 3655.140961] usb 1-4: new high speed USB device using ehci_hcd and address 43
[ 3655.292207] hub 1-4:1.0: USB hub found
[ 3655.292291] hub 1-4:1.0: 4 ports detected
[ 3655.591413] usb 1-4.4: new high speed USB device using ehci_hcd and address 44
[ 3655.849013] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3655.862900] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input26
[ 3771.494527] usb 1-4: USB disconnect, address 43
[ 3771.494529] usb 1-4.4: USB disconnect, address 44
[ 3771.930962] usb 1-4: new high speed USB device using ehci_hcd and address 45
[ 3772.082457] hub 1-4:1.0: USB hub found
[ 3772.082614] hub 1-4:1.0: 4 ports detected
[ 3772.361197] usb 1-4.4: new high speed USB device using ehci_hcd and address 46
[ 3772.599707] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3772.613872] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input27
[ 3831.483967] usb 1-4: USB disconnect, address 45
[ 3831.483969] usb 1-4.4: USB disconnect, address 46
[ 3831.960097] usb 1-4: new high speed USB device using ehci_hcd and address 47
[ 3832.112514] hub 1-4:1.0: USB hub found
[ 3832.112672] hub 1-4:1.0: 4 ports detected
[ 3832.395546] usb 1-4.4: new high speed USB device using ehci_hcd and address 48
[ 3832.650765] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3832.665427] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input28
[ 3883.973723] usb 1-4: USB disconnect, address 47
[ 3883.973725] usb 1-4.4: USB disconnect, address 48
[ 3884.290132] usb 1-4: new high speed USB device using ehci_hcd and address 49
[ 3884.441472] hub 1-4:1.0: USB hub found
[ 3884.441579] hub 1-4:1.0: 4 ports detected
[ 3884.721799] usb 1-4.4: new high speed USB device using ehci_hcd and address 50
[ 3884.960550] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3884.974837] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input29
[ 3929.903760] usb 1-4: USB disconnect, address 49
[ 3929.903762] usb 1-4.4: USB disconnect, address 50
[ 3930.380944] usb 1-4: new high speed USB device using ehci_hcd and address 51
[ 3930.531501] hub 1-4:1.0: USB hub found
[ 3930.531585] hub 1-4:1.0: 4 ports detected
[ 3930.811837] usb 1-4.4: new high speed USB device using ehci_hcd and address 52
[ 3931.069908] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3931.084342] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input30
[ 3965.522236] usb 1-4: USB disconnect, address 51
[ 3965.522238] usb 1-4.4: USB disconnect, address 52
[ 3966.010129] usb 1-4: new high speed USB device using ehci_hcd and address 53
[ 3966.152533] hub 1-4:1.0: USB hub found
[ 3966.152690] hub 1-4:1.0: 4 ports detected
[ 3966.431784] usb 1-4.4: new high speed USB device using ehci_hcd and address 54
[ 3966.690157] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3966.704070] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input31
[ 3989.893191] usb 1-4: USB disconnect, address 53
[ 3989.893193] usb 1-4.4: USB disconnect, address 54
[ 3990.290963] usb 1-4: new high speed USB device using ehci_hcd and address 55
[ 3990.442514] hub 1-4:1.0: USB hub found
[ 3990.442660] hub 1-4:1.0: 4 ports detected
[ 3990.721118] usb 1-4.4: new high speed USB device using ehci_hcd and address 56
[ 3990.978991] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 3990.994803] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input32
[ 4080.813298] usb 1-4: USB disconnect, address 55
[ 4080.813300] usb 1-4.4: USB disconnect, address 56
[ 4081.250961] usb 1-4: new high speed USB device using ehci_hcd and address 57
[ 4081.402284] hub 1-4:1.0: USB hub found
[ 4081.402383] hub 1-4:1.0: 4 ports detected
[ 4081.681882] usb 1-4.4: new high speed USB device using ehci_hcd and address 58
[ 4081.922096] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 4081.937138] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input33
[ 4180.404992] usb 1-4: USB disconnect, address 57
[ 4180.404994] usb 1-4.4: USB disconnect, address 58
[ 4180.840097] usb 1-4: new high speed USB device using ehci_hcd and address 59
[ 4180.992363] hub 1-4:1.0: USB hub found
[ 4180.992452] hub 1-4:1.0: 4 ports detected
[ 4181.270953] usb 1-4.4: new high speed USB device using ehci_hcd and address 60
[ 4181.529925] uvcvideo: Found UVC 1.00 device (046d:0994)
[ 4181.544959] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0/input/input34
[ 4181.592738] 60:3:1: cannot set freq 16000 to ep 0x86
[ 4181.690431] hub 1-4:1.0: hub_port_status failed (err = -71)
[ 4181.690452] usb 1-4: USB disconnect, address 59
[ 4181.690453] usb 1-4.4: USB disconnect, address 60
[ 4181.697357] 60:3:1: usb_set_interface failed
[ 4181.697367] 60:3:1: usb_set_interface failed
[ 4181.697380] 60:3:1: usb_set_interface failed
[ 4181.697454] 60:3:1: usb_set_interface failed
[ 4181.697638] 60:3:1: usb_set_interface failed
[ 4181.697774] 60:3:1: usb_set_interface failed
[ 4181.697787] 60:3:1: usb_set_interface failed
[ 4181.697798] 60:3:1: usb_set_interface failed
[ 4181.697845] 60:3:1: usb_set_interface failed
[ 4181.697996] 60:3:1: usb_set_interface failed
[ 4181.698170] 60:3:1: usb_set_interface failed
[ 4181.698185] 60:3:1: usb_set_interface failed
[ 4181.698227] 60:3:1: usb_set_interface failed
[ 4181.698300] 60:3:1: usb_set_interface failed
[ 4181.698466] 60:3:1: usb_set_interface failed
[ 4181.698727] 60:3:1: usb_set_interface failed
[ 4181.698743] 60:3:1: usb_set_interface failed
[ 4181.698790] 60:3:1: usb_set_interface failed
[ 4181.698865] 60:3:1: usb_set_interface failed
[ 4181.699033] 60:3:1: usb_set_interface failed
[ 4181.712107] 60:3:1: usb_set_interface failed
[ 4181.712119] 60:3:1: usb_set_interface failed
[ 4181.712132] 60:3:1: usb_set_interface failed
[ 4181.712206] 60:3:1: usb_set_interface failed
[ 4181.712403] 60:3:1: usb_set_interface failed
[ 4181.712532] 60:3:1: usb_set_interface failed
[ 4181.712540] 60:3:1: usb_set_interface failed
[ 4181.712551] 60:3:1: usb_set_interface failed
[ 4181.712596] 60:3:1: usb_set_interface failed
[ 4181.712738] 60:3:1: usb_set_interface failed
[ 4181.712908] 60:3:1: usb_set_interface failed
[ 4181.712924] 60:3:1: usb_set_interface failed
[ 4181.712966] 60:3:1: usb_set_interface failed
[ 4181.713037] 60:3:1: usb_set_interface failed
[ 4181.713202] 60:3:1: usb_set_interface failed
[ 4181.713466] 60:3:1: usb_set_interface failed
[ 4181.713482] 60:3:1: usb_set_interface failed
[ 4181.713528] 60:3:1: usb_set_interface failed
[ 4181.713602] 60:3:1: usb_set_interface failed
[ 4181.713770] 60:3:1: usb_set_interface failed
[ 4181.725853] 60:3:1: usb_set_interface failed
[ 4181.725864] 60:3:1: usb_set_interface failed
[ 4181.725877] 60:3:1: usb_set_interface failed
[ 4181.725951] 60:3:1: usb_set_interface failed
[ 4181.726143] 60:3:1: usb_set_interface failed
[ 4181.726293] 60:3:1: usb_set_interface failed
[ 4181.726301] 60:3:1: usb_set_interface failed
[ 4181.726315] 60:3:1: usb_set_interface failed
[ 4181.726364] 60:3:1: usb_set_interface failed
[ 4181.726530] 60:3:1: usb_set_interface failed
[ 4181.726722] 60:3:1: usb_set_interface failed
[ 4181.726740] 60:3:1: usb_set_interface failed
[ 4181.726787] 60:3:1: usb_set_interface failed
[ 4181.726866] 60:3:1: usb_set_interface failed
[ 4181.727062] 60:3:1: usb_set_interface failed
[ 4181.727324] 60:3:1: usb_set_interface failed
[ 4181.727340] 60:3:1: usb_set_interface failed
[ 4181.727387] 60:3:1: usb_set_interface failed
[ 4181.727463] 60:3:1: usb_set_interface failed
[ 4181.727636] 60:3:1: usb_set_interface failed
[ 4181.741091] 60:3:1: usb_set_interface failed
[ 4181.741104] 60:3:1: usb_set_interface failed
[ 4181.741119] 60:3:1: usb_set_interface failed
[ 4181.741201] 60:3:1: usb_set_interface failed
[ 4181.741398] 60:3:1: usb_set_interface failed
[ 4181.741564] 60:3:1: usb_set_interface failed
[ 4181.741572] 60:3:1: usb_set_interface failed
[ 4181.741586] 60:3:1: usb_set_interface failed
[ 4181.741636] 60:3:1: usb_set_interface failed
[ 4181.741807] 60:3:1: usb_set_interface failed
[ 4181.741994] 60:3:1: usb_set_interface failed
[ 4181.742011] 60:3:1: usb_set_interface failed
[ 4181.742053] 60:3:1: usb_set_interface failed
[ 4181.742127] 60:3:1: usb_set_interface failed
[ 4181.742308] 60:3:1: usb_set_interface failed
[ 4181.742569] 60:3:1: usb_set_interface failed
[ 4181.742590] 60:3:1: usb_set_interface failed
[ 4181.742637] 60:3:1: usb_set_interface failed
[ 4181.742713] 60:3:1: usb_set_interface failed
[ 4181.742899] 60:3:1: usb_set_interface failed
[ 4182.024205] usb 1-4: new high speed USB device using ehci_hcd and address 61
[ 4182.172478] hub 1-4:1.0: USB hub found
[ 4182.172620] hub 1-4:1.0: 4 ports detected
[ 4182.450994] usb 1-4.4: new full speed USB device using ehci_hcd and address 62
[ 4182.530854] usb 1-4.4: device descriptor read/64, error -32
[ 4182.721444] usb 1-4.4: device descriptor read/64, error -32
[ 4182.910787] usb 1-4.4: new full speed USB device using ehci_hcd and address 63
[ 4182.991351] usb 1-4.4: device descriptor read/64, error -32
[ 4183.181355] usb 1-4.4: device descriptor read/64, error -32
[ 4183.370829] usb 1-4.4: new full speed USB device using ehci_hcd and address 64
[ 4183.790067] usb 1-4.4: device not accepting address 64, error -32
[ 4183.870868] usb 1-4.4: new full speed USB device using ehci_hcd and address 65
[ 4184.290927] usb 1-4.4: device not accepting address 65, error -32
[ 4184.291009] hub 1-4:1.0: unable to enumerate USB device on port 4
[20043.041644] usb 1-4.4: new full speed USB device using ehci_hcd and address 66
[20043.121414] usb 1-4.4: device descriptor read/64, error -32
[20043.310631] usb 1-4.4: device descriptor read/64, error -32
[20043.501599] usb 1-4.4: new full speed USB device using ehci_hcd and address 67
[20043.581454] usb 1-4.4: device descriptor read/64, error -32
[20043.771413] usb 1-4.4: device descriptor read/64, error -32
[20043.961641] usb 1-4.4: new full speed USB device using ehci_hcd and address 68
[20044.380892] usb 1-4.4: device not accepting address 68, error -32
[20044.461677] usb 1-4.4: new full speed USB device using ehci_hcd and address 69
[20044.880093] usb 1-4.4: device not accepting address 69, error -32
[20044.880207] hub 1-4:1.0: unable to enumerate USB device on port 4
[20989.201762] usb 1-4.4: new full speed USB device using ehci_hcd and address 70
[20989.300780] usb 1-4.4: device descriptor read/64, error -32
[20989.492247] usb 1-4.4: device descriptor read/64, error -32
[20989.681587] usb 1-4.4: new full speed USB device using ehci_hcd and address 71
[20989.760696] usb 1-4.4: device descriptor read/64, error -32
[20989.951412] usb 1-4.4: device descriptor read/64, error -32
[20990.141633] usb 1-4.4: new full speed USB device using ehci_hcd and address 72
[20990.560894] usb 1-4.4: device not accepting address 72, error -32
[20990.641669] usb 1-4.4: new full speed USB device using ehci_hcd and address 73
[20991.060894] usb 1-4.4: device not accepting address 73, error -32
[20991.061065] hub 1-4:1.0: unable to enumerate USB device on port 4
[21424.241718] usb 1-4.4: new full speed USB device using ehci_hcd and address 74
[21424.320800] usb 1-4.4: device descriptor read/64, error -32
[21424.512296] usb 1-4.4: device descriptor read/64, error -32
[21424.701763] usb 1-4.4: new full speed USB device using ehci_hcd and address 75
[21424.789120] usb 1-4.4: device descriptor read/64, error -32
[21424.991170] usb 1-4.4: device descriptor read/64, error -32
[21425.181677] usb 1-4.4: new full speed USB device using ehci_hcd and address 76
[21425.600862] usb 1-4.4: device not accepting address 76, error -32
[21425.680800] usb 1-4.4: new full speed USB device using ehci_hcd and address 77
[21426.100909] usb 1-4.4: device not accepting address 77, error -32
[21426.100982] hub 1-4:1.0: unable to enumerate USB device on port 4
[21757.850096] usb 2-2: new high speed USB device using ehci_hcd and address 3
[21758.046107] Initializing USB Mass Storage driver...
[21758.046580] scsi10 : usb-storage 2-2:1.0
[21758.046695] usbcore: registered new interface driver usb-storage
[21758.046697] USB Mass Storage support registered.
[21758.471786] usb 1-4.4: new full speed USB device using ehci_hcd and address 78
[21758.551643] usb 1-4.4: device descriptor read/64, error -32
[21758.740703] usb 1-4.4: device descriptor read/64, error -32
[21758.930918] usb 1-4.4: new full speed USB device using ehci_hcd and address 79
[21759.011440] usb 1-4.4: device descriptor read/64, error -32
[21759.202128] usb 1-4.4: device descriptor read/64, error -32
[21759.359086] scsi 10:0:0:0: Direct-Access FLASH Drive SM_USB20 3000 PQ: 0 ANSI: 0 CCS
[21759.359433] sd 10:0:0:0: Attached scsi generic sg2 type 0
[21759.360818] sd 10:0:0:0: [sdb] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB)
[21759.361578] sd 10:0:0:0: [sdb] Write Protect is off
[21759.361580] sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00
[21759.361582] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[21759.363952] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[21759.363956] sdb: sdb1
[21759.366593] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[21759.366596] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[21759.391601] usb 1-4.4: new full speed USB device using ehci_hcd and address 80
[21759.810894] usb 1-4.4: device not accepting address 80, error -32
[21759.891664] usb 1-4.4: new full speed USB device using ehci_hcd and address 81
[21760.311761] usb 1-4.4: device not accepting address 81, error -32
[21760.311950] hub 1-4:1.0: unable to enumerate USB device on port 4
[21760.590867] usb 2-3: new high speed USB device using ehci_hcd and address 4
[21760.757038] scsi11 : usb-storage 2-3:1.0
[21761.751668] scsi 11:0:0:0: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0
[21762.345574] scsi 11:0:0:1: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0
[21762.346578] scsi 11:0:0:2: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0
[21762.347559] scsi 11:0:0:3: Direct-Access Generic STORAGE DEVICE 0119 PQ: 0 ANSI: 0
[21762.347911] sd 11:0:0:0: Attached scsi generic sg3 type 0
[21762.348016] sd 11:0:0:1: Attached scsi generic sg4 type 0
[21762.348084] sd 11:0:0:2: Attached scsi generic sg5 type 0
[21762.348642] sd 11:0:0:3: Attached scsi generic sg6 type 0
[21762.355190] sd 11:0:0:1: [sdd] Attached SCSI removable disk
[21762.356557] sd 11:0:0:2: [sde] Attached SCSI removable disk
[21762.357349] sd 11:0:0:0: [sdc] 4061232 512-byte logical blocks: (2.07 GB/1.93 GiB)
[21762.363184] sd 11:0:0:0: [sdc] Write Protect is off
[21762.363187] sd 11:0:0:0: [sdc] Mode Sense: 02 00 00 00
[21762.363188] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[21762.379933] sd 11:0:0:3: [sdf] Attached SCSI removable disk
[21762.383551] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[21762.383556] sdc: sdc1
[21762.400444] sd 11:0:0:0: [sdc] Assuming drive cache: write through
[21762.400447] sd 11:0:0:0: [sdc] Attached SCSI removable disk
[22397.970204] usb 2-2: USB disconnect, address 3
[22774.183804] usb 1-4.4: new full speed USB device using ehci_hcd and address 82
[22774.281274] usb 1-4.4: device descriptor read/64, error -32
[22774.470776] usb 1-4.4: device descriptor read/64, error -32
[22774.661619] usb 1-4.4: new full speed USB device using ehci_hcd and address 83
[22774.741478] usb 1-4.4: device descriptor read/64, error -32
[22774.931571] usb 1-4.4: device descriptor read/64, error -32
[22775.121614] usb 1-4.4: new full speed USB device using ehci_hcd and address 84
[22775.540960] usb 1-4.4: device not accepting address 84, error -32
[22775.621666] usb 1-4.4: new full speed USB device using ehci_hcd and address 85
[22776.040857] usb 1-4.4: device not accepting address 85, error -32
[22776.040960] hub 1-4:1.0: unable to enumerate USB device on port 4
[24031.773013] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[24049.530232] usb 2-3: USB disconnect, address 4
[24220.603568] lo: Disabled Privacy Extensions
[24862.201619] usb 1-4.4: new full speed USB device using ehci_hcd and address 86
[24862.280729] usb 1-4.4: device descriptor read/64, error -32
[24862.471283] usb 1-4.4: device descriptor read/64, error -32
[24862.660914] usb 1-4.4: new full speed USB device using ehci_hcd and address 87
[24862.740774] usb 1-4.4: device descriptor read/64, error -32
[24862.931462] usb 1-4.4: device descriptor read/64, error -32
[24863.121581] usb 1-4.4: new full speed USB device using ehci_hcd and address 88
[24863.540180] usb 1-4.4: device not accepting address 88, error -32
[24863.621733] usb 1-4.4: new full speed USB device using ehci_hcd and address 89
[24864.040846] usb 1-4.4: device not accepting address 89, error -32
[24864.041008] hub 1-4:1.0: unable to enumerate USB device on port 4